File 0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch of Package dracut.892

From 8c53ac66b29e91fa5a6140e7e414ca884032fd11 Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Mon, 8 Sep 2014 16:43:20 +0200
Subject: dracut.usage.asc: Remove distro specific help from manpage

Signed-off-by: Thomas Renninger <trenn@suse.de>
---
 dracut.usage.asc |   17 +----------------
 1 files changed, 1 insertions(+), 16 deletions(-)

diff --git a/dracut.usage.asc b/dracut.usage.asc
index 0787ead..6f3c513 100644
--- a/dracut.usage.asc
+++ b/dracut.usage.asc
@@ -246,21 +246,6 @@ specified multiple times.
 If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
-On a Red Hat Enterprise Linux or Fedora system, this means, you have to install
-the _dracut-network_ rpm package:
-
-
-----
-# yum install dracut-network
-----
-
-The resulting initramfs image can be served by a boot manager residing on your
-local hard drive or it can be served by a PXE/TFTP server.
-
-How to setup your PXE/TFTP server can be found in the
-http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/[Red
-Hat Enterprise Linux Storage Administration Guide].
-
 If you specify ip=auto on the kernel command line, then dracut asks a dhcp
 server about the ip adress for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
@@ -300,7 +285,7 @@ This will reduce the size of the initramfs image significantly.
 If the boot process does not succeed, you have several options to debug the
 situation. Some of the basic operations are covered here. For more information
 you should also visit:
-http://fedoraproject.org/wiki/How_to_debug_Dracut_problems
+https://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
 
 
 [[identifying-your-problem-area]]
-- 
1.7.6.1