File grub2.changes of Package grub2.2691

-------------------------------------------------------------------
Tue Aug  2 07:49:59 UTC 2016 - mchang@suse.com

- add grub2-mkstandalone-out-of-bound-access-to-tar-header-.patch,
  grub2-efi-check-path-non-null-before-grub_strrchr.patch
  grub2-efidisk-Respect-block_io_protocol-buffer-alignment.patch (bsc#990086)
- Cherrypick upstream patches for bug fixes (bsc#990086)
  * 0001-Initialized-initrd_ctx-so-we-don-t-free-a-random-poi.patch
  * 0002-grub-core-disk-lzopio.c-fix-double-free-in-error-pat.patch
  * 0003-fix-double-free-in-grub_net_recv_tcp_packet.patch
  * 0004-arm64-setjmp-Add-missing-move-for-arg1-0-case.patch
  * 0005-tftp-fix-memory-leaks-in-open.patch
  * 0006-Remove-the-variable-oldname-which-is-attempting-to-f.patch
- Upstream patch to fix GRUB2 clock too slow on RPI3 (bsc#990604)
  * grub2-arm64-Use-cpu-timer-for-timekeeping.patch

-------------------------------------------------------------------
Thu Jul 21 06:45:15 UTC 2016 - mchang@suse.com

- Add patches from Roberto Sassu <rsassu@suse.de>
- Fix grub2-10_linux-avoid-multi-device-root-kernel-argument.patch,
  device path is not tested if GRUB_DISABLE_LINUX_UUID="true"
  - added grub2-fix-multi-device-root-kernel-argument.patch
  (bsc#960776)
- grub2-zipl-setup: avoid multi-device root= kernel argument
  * added grub2-zipl-setup-fix-btrfs-multipledev.patch
  (bsc#960776)
- Add SUSE_REMOVE_LINUX_ROOT_PARAM configuration option
  to /etc/default/grub, to remove root= and rootflags= from the
  kernel command line in /boot/grub2/grub.cfg and /boot/zipl/config
  - added grub2-suse-remove-linux-root-param.patch
  (bsc#962585)

-------------------------------------------------------------------
Mon Jul 11 06:59:45 UTC 2016 - mchang@suse.com

- Update grub2-once to fix --list bug (bsc#980088)
- update grub2-once with patch from Björn Voigt - skip comments in
  /etc/sysconfig/bootloader (boo#963610)
- Examine variables from grub environment in 'grub2-once'. (fate#319632)
- Extend config-file parsing in 'grub2-once'. (fate#319632)

-------------------------------------------------------------------
Wed May 11 11:02:58 UTC 2016 - mbrugger@suse.com

- Add support for "t" hotkey to switch to text mode (bsc#976836)
  * added grub2-SUSE-Add-the-t-hotkey.patch
- Fix default entry boot (bsc#977590)
  * refreshed grub2-Add-hidden-menu-entries.patch

-------------------------------------------------------------------
Mon Mar 21 11:27:54 UTC 2016 - mchang@suse.com

- Fix GRUB_DISABLE_LINUX_UUID to be ignore and also fallback kernel device
  won't be used if fs uuid not detected (bsc#971867)
  * added 0001-10_linux-Fix-grouping-of-tests-for-GRUB_DEVICE.patch
  * added 0002-20_linux_xen-fix-test-for-GRUB_DEVICE.patch

-------------------------------------------------------------------
Wed Mar  2 14:21:19 UTC 2016 - mchang@suse.com

- fix attempt to seek outside of the file error when parsing xen ELF notes
  (bsc#968721)
  * added grub2-xen-fix-bzImage-payload-length.patch  

-------------------------------------------------------------------
Wed Feb  3 10:25:16 UTC 2016 - mchang@suse.com

- Add config option to set efi xen loader command line option (bsc#957383)
  * added grub2-efi-xen-cmdline.patch 
- Fix guest unable to boot if rootfs is on btrfs and spans multiple disks
  (bsc#960776)
  * added grub2-10_linux-avoid-multi-device-root-kernel-argument.patch
- Support booting installer media as PV DomU (boo#926795)
  * added grub2-xen-pv-firmware.cfg from Olaf Hering <ohering@suse.com>
- Backport upstream patches for HyperV gen2 TSC timer calbration without
  RTC (bsc#904647) (bsc#962182)
  * added 0001-grub-core-kern-i386-tsc.c-calibrate_tsc-Ensure-that.patch
  * added 0002-i386-tsc-Fix-unused-function-warning-on-xen.patch
  * added 0003-acpi-do-not-skip-BIOS-scan-if-EBDA-length-is-zero.patch
  * added 0004-tsc-Use-alternative-delay-sources-whenever-appropria.patch
  * added 0005-i386-fix-TSC-calibration-using-PIT.patch

-------------------------------------------------------------------
Tue Dec  1 08:43:14 UTC 2015 - mchang@suse.com

- Check msdos header to find PE file header (bsc#954126)
  * modified grub2-efi-chainload-harder.patch:
- Use dirname for copying xen kernel and initrd to esp (bsc#955493)
  * modified grub2-efi-xen-chainload.patch
- drop grub2-fix-Grub2-with-SUSE-Xen-package-install.patch (bsc#774666)

-------------------------------------------------------------------
Tue Dec  1 08:42:56 UTC 2015 - arvidjaar@gmail.com

- Add 0001-unix-do-not-close-stdin-in-grub_passwd_get.patch
  Fix reading password by grub2-mkpasswd-pbdk2 without controlling
  tty, e.g. when called from Xfce menu (boo#954519)
- add luks, gcry_rijndael, gcry_sha1 to signed EFI image to support
  LUKS partition in default setup (boo#917427) (boo#955609)

-------------------------------------------------------------------
Mon Nov 30 08:57:22 UTC 2015 - mchang@suse.com

- CVE-2015-8370: grub2: overflows in grub_password_get and grub_user_get
  (bsc#956631)
  * add fix-overflows-in-grub_password_get-and-grub_user_get.patch

-------------------------------------------------------------------
Mon Nov 30 04:51:00 UTC 2015 - mchang@suse.com

- Add btrfs default subvol /.snapshots/1/snapshot into pvgrub2's
  config search path list (bsc#952539) 

-------------------------------------------------------------------
Tue Nov 17 03:44:16 UTC 2015 - mchang@suse.com

- Fix wrong escape sequence in previous commit (bsc#955115)
  * modified grub2-snapper-plugin.sh 

-------------------------------------------------------------------
Mon Nov 16 09:27:35 UTC 2015 - mchang@suse.com

- Fix snapshot booting on s390x (bsc#955115)
  * modified grub2-snapper-plugin.sh 

-------------------------------------------------------------------
Fri Nov  6 08:29:25 UTC 2015 - mchang@suse.com

- Fallback to old subvol name scheme to support old snapshot config
  (bsc#953538)
  * added grub2-btrfs-07-subvol-fallback.patch

-------------------------------------------------------------------
Thu Oct 29 04:17:08 UTC 2015 - mchang@suse.com

- Add missing quoting for linuxefi (bsc#951962)
  * modified grub2-secureboot-use-linuxefi-on-uefi.patch 
  * refreshed grub2-secureboot-provide-linuxefi-config.patch

-------------------------------------------------------------------
Wed Oct  7 09:01:37 UTC 2015 - mchang@suse.com

- Upstream patches for fixing file descriptor leakage (bsc#943784) 
  * added 0001-unix-password-Fix-file-descriptor-leak.patch
  * added 0002-linux-getroot-fix-descriptor-leak.patch
  * added 0003-util-grub-mount-fix-descriptor-leak.patch
  * added 0004-linux-ofpath-fix-descriptor-leak.patch
  * added 0005-grub-fstest-fix-descriptor-leak.patch

-------------------------------------------------------------------
Mon Oct  5 06:03:01 UTC 2015 - mchang@suse.com

- evaluate the menu entry's title string by printf (bsc#946993)
  * modified grub2-once

-------------------------------------------------------------------
Wed Sep 23 20:02:47 UTC 2015 - dmueller@suse.com

- add 0001-efinet-Check-for-immediate-completition.patch,
  0001-efinet-enable-hardware-filters-when-opening-interfac.patch,
  grub2-arm64-efinet-handle-get_status-on-buggy-firmware-properly.patch
  (bsc#947203)

-------------------------------------------------------------------
Fri Sep 18 12:53:01 UTC 2015 - rw@suse.com

- Force '/usr' to read-only before calling kexec. (bsc#932951)
  * modified grub2-s390x-04-grub2-install.patch
- Require 'kexec-tools' for System z. (bsc#944358)
  * modified grub2.spec

-------------------------------------------------------------------
Fri Sep 18 03:33:53 UTC 2015 - mchang@suse.com

- Add btrfs default subvol @/.snapshots/1/snapshot in config search
  list for system installed to snapshot. (bsc#946148) 
  * modified grub2.spec

-------------------------------------------------------------------
Thu Sep 17 06:12:03 UTC 2015 - mchang@suse.com

- Do not use shim lock protocol for reading pe header, it won't be
  available when secure boot disabled (bsc#943380)
- Make firmware flaw condition be more precisely detected and add
  debug message for the case
  * modified grub2-efi-chainload-harder.patch:

-------------------------------------------------------------------
Wed Sep  9 07:41:30 UTC 2015 - mchang@suse.com

- Set default GRUB_DISTRIBUTOR from /etc/os-release if it is empty 
  or not set by user (bsc#942519)
  * added grub2-default-distributor.patch 
  * modified grub.default

-------------------------------------------------------------------
Tue Jul  7 08:14:03 UTC 2015 - mchang@suse.com

- Replace 12.1 with 12 SP1 for the list of snapshots (bsc#934252)
  * modified grub2-snapper-plugin.sh

-------------------------------------------------------------------
Tue Jun 30 16:55:13 UTC 2015 - dmueller@suse.com

- add grub2-arm64-Reduce-timer-event-frequency-by-10.patch,
  grub2-arm64-set-correct-length.patch,
  grub2-mkconfig-aarch64.patch (fate#318444)

-------------------------------------------------------------------
Tue Jun 16 07:13:22 UTC 2015 - mchang@suse.com

- Allow to execute menuentry unrestricted as default (fate#318574) 
  * added grub2-menu-unrestricted.patch 

-------------------------------------------------------------------
Fri Jun 12 07:20:00 UTC 2015 - mchang@suse.com

- Show user defined comments in grub2 menu for snapshots (fate#318101)
  * modified grub2-snapper-plugin.sh

-------------------------------------------------------------------
Tue Jun  9 09:36:27 UTC 2015 - mchang@suse.com

- If we have a post entry and the description field is empty, we should use the
  "Pre" number and add that description to the post entry. (fate#317972)

-------------------------------------------------------------------
Thu Jun  4 06:13:28 UTC 2015 - mchang@suse.com

- Fix install into snapper controlled btrfs subvolume and can't
  load grub modules from separate subvolume (fate#318392)
  * added grub2-btrfs-06-subvol-mount.patch
  * grub2-snapper-plugin.sh: use absolute subvol name

-------------------------------------------------------------------
Wed Jun  3 20:07:33 UTC 2015 - agraf@suse.com

- Fix license for setjmp module
  * added grub2-arm64-setjmp-Add-missing-license-macro.patch

-------------------------------------------------------------------
Sun May 10 19:38:00 UTC 2015 - arvidjaar@gmail.com

- replace grub2-efinet-reopen-SNP-protocol-for-exclusive-use-by-grub.patch
  with upstream version:
  * 0001-efidisk-move-device-path-helpers-in-core-for-efinet.patch
  * 0002-efinet-skip-virtual-IPv4-and-IPv6-devices-when-enume.patch
  * 0003-efinet-open-Simple-Network-Protocol-exclusively.patch
  Fixes EFI network boot in some QEMU configurations.

-------------------------------------------------------------------
Mon Mar  2 09:57:40 UTC 2015 - mchang@suse.com

- UEFI IPv6 PXE booting support (bsc#894178)
- added patches
  * grub2-net-send-router-solicitation-for-ipv6-address-autoconf.patch
  * grub2-net-icmp6-fix-no-respond-to-neighbor-solicit-message.patch
  * grub2-efinet-ipv6-dhcpv6.patch
  * grub2-efinet-ipv6-dhcpv6-use-mac-device.patch 
  * grub2-bootp6-dns.patch

-------------------------------------------------------------------
Wed Feb 11 11:30:58 UTC 2015 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * streamline boot to grub menu.  (bsc#898198)
- grub2-s390x-06-loadparm.patch:
  * ignore case and fix transliteration of parameter.  (bsc#891946)
- grub2-once:
  * fix submenu handling and ignore comments.

-------------------------------------------------------------------
Fri Jan 30 14:26:54 UTC 2015 - dvaleev@suse.com

- Fix CAS reboot on PowerPC (bsc#913667)
  - grub2-ppc64-cas-reboot-support.patch 

-------------------------------------------------------------------
Mon Jan 26 04:40:09 UTC 2015 - mchang@suse.com

- update grub2-snapper-plugin.sh: 
  * cleanup grub-snapshot.cfg not referring to any snapshot
    (boo#909359, bsc#914514)
  * replace echo -e with printf to fix script bashism

-------------------------------------------------------------------
Mon Oct 20 09:00:05 UTC 2014 - rw@suse.de

- grub2-s390x-06-loadparm.patch,
  grub2-commands-introduce-read_file-subcommand.patch:
  * allow s390x to telecontrol grub2.  (bsc#891946, bsc#892852)

- grub2-once:
  * add '--enum' option to enumerate boot-entries in a way
    actually understood by 'grub2'.  (bsc#892852, bsc#892811)

- grub2-btrfs-05-grub2-mkconfig.patch:
  * refresh
  * plus fix for 'rollback' hint (while at it).  (bsc#901487)

- grub2-s390x-05-grub2-mkconfig.patch,
  grub2-btrfs-workaround-grub2-once.patch;
  * refresh.

-------------------------------------------------------------------
Fri Sep 26 11:32:12 UTC 2014 - mchang@suse.com

- do not pass root= when root is on nfs (bnc#894374) 

- modified patches:
  * grub2-pass-corret-root-for-nfsroot.patch
  * grub2-secureboot-provide-linuxefi-config.patch
  * grub2-secureboot-use-linuxefi-on-uefi.patch

-------------------------------------------------------------------
Fri Sep 19 05:54:52 UTC 2014 - mchang@suse.com

- do not use environment block in btrfs for s390x (bnc#892358)
  * refresh grub2-btrfs-workaround-grub2-once.patch 

-------------------------------------------------------------------
Mon Sep 15 07:22:21 UTC 2014 - mchang@suse.com

- fix parsing /proc/self/mountinfo (bnc#896186)
  * refresh grub2-pass-corret-root-for-nfsroot.patch
- fix xen pvops kernel not appear on menu (bnc#895286)
  * refresh grub2-fix-menu-in-xen-host-server.patch 
- fix extraneous comma in printf shell command (bnc#895884)
  * refresh grub2-btrfs-04-grub2-install.patch  

-------------------------------------------------------------------
Fri Sep  5 03:00:47 UTC 2014 - mchang@suse.com

- add nfs or nfs4 to root= for root on nfs (bnc#894374) 
- modified patches:
  * grub2-pass-corret-root-for-nfsroot.patch

-------------------------------------------------------------------
Wed Sep  3 06:46:55 UTC 2014 - mchang@suse.com

- workaround grub2-once (bnc#892358)
- use unused sectors in btrfs as environment block for holding the
  next_entry variable
  * added grub2-btrfs-workaround-grub2-once.patch
  * refresh grub2-btrfs-05-grub2-mkconfig.patch
- running a service during boot to unset next_entry, this is workaround
  for lvm, md and s390
  * updated grub2-once
  * added grub2-once.service

-------------------------------------------------------------------
Mon Sep  1 10:36:46 UTC 2014 - mchang@suse.com

- add grub2-once.service 

-------------------------------------------------------------------
Fri Aug 29 11:01:40 UTC 2014 - mchang@suse.com

- add grub2-once-workaround.patch 

-------------------------------------------------------------------
Wed Aug 27 09:16:48 UTC 2014 - schwab@suse.de

- Enable building on aarch64
- aarch64-reloc.patch: strip .eh_frame section from arm64-efi kernel

-------------------------------------------------------------------
Fri Aug 22 22:48:34 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * fix removal of obsolete files.  (bnc#892810)

-------------------------------------------------------------------
Fri Aug 22 21:24:29 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * add support for legacy '/boot'.  (bnc#873951, bnc#892088)

-------------------------------------------------------------------
Fri Aug 22 18:07:47 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * make snapshots submenu available after rollback.  (bnc#892014)

-------------------------------------------------------------------
Thu Aug 14 06:35:58 UTC 2014 - mchang@suse.com

- grub2-btrfs-fix-incorrect-address-reference.patch
  * Fix incorrect address reference in GRUB_BTRFS_EXTENT_REGULAR
    range check (bnc#869748) 

-------------------------------------------------------------------
Mon Aug 11 13:50:51 UTC 2014 - dvaleev@suse.com

- Fix the 64-bit trampoline code in dynamic linker (bnc#890999)
  grub2-ppc64le-fix-64bit-trampoline-in-dyn-linker.patch

-------------------------------------------------------------------
Fri Aug  1 04:48:10 UTC 2014 - mchang@suse.com

- grub2-vbe-blacklist-preferred-1440x900x32.patch
  * Blacklist preferred resolution 1440x900x32 which is broken on 
    many Thinkpads (bnc#888727) 

-------------------------------------------------------------------
Thu Jul 31 10:45:58 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * don't set 'rootflags' for zIPL.  (bnc#889572)

-------------------------------------------------------------------
Wed Jul 30 13:26:39 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * correctly set 'rootflags' for zIPL.  (#bnc#889562, bnc#889572)

-------------------------------------------------------------------
Wed Jul 30 10:05:30 UTC 2014 - rw@suse.com

- grub2-efi-chainload-harder.patch:
  * allow XEN to be chain-loaded despite firmware flaws.  (bnc#887793)

-------------------------------------------------------------------
Tue Jul 29 11:46:54 CEST 2014 - tiwai@suse.de

- Prefer a higher resolution in efi_gop driver if the mode taking
  over is too small like 640x480 (bnc#887972):
  grub2-efi_gop-avoid-low-resolution.patch 

-------------------------------------------------------------------
Mon Jul 28 14:28:10 UTC 2014 - rw@suse.com

- enhance grub2-snapper-plugin.sh with hotkeys for s390.
- grub2-btrfs-05-grub2-mkconfig.patch:
  * add conditional pseudo sub-menu to highlight snapshot booting.
- grub2-s390x-03-output-7-bit-ascii.patch:
  * support hotkeys on all line-mode terminals, not only 3215.
- grub2-s390x-05-grub2-mkconfig.patch:
  * remove 's' from possible hot-keys for "bootable snapshots".
  (bnc#885668)
- grub2-s390x-04-grub2-install.patch:
  * grub2-zipl-setup: honor GRUB_DISABLE_LINUX_UUID.
  (bnc#885854)

-------------------------------------------------------------------
Mon Jul 28 10:22:55 UTC 2014 - dvaleev@suse.com

- update grub2-ppc64le-memory-map.patch to match the one submitted
  upstream 
(http://lists.gnu.org/archive/html/grub-devel/2014-07/msg00033.html)

-------------------------------------------------------------------
Mon Jul 21 08:28:09 UTC 2014 - mchang@suse.com

- add warning in grubenv file about do not edit it other than by
  grub2-editenv (bnc#887008)
- added grub2-editenv-add-warning-message.patch

-------------------------------------------------------------------
Fri Jul  4 03:45:04 UTC 2014 - mchang@suse.com

- fix broken graphics with efifb on QEMU/KVM and nomodeset (bnc#884558)
- added patch:grub2-efi-disable-video-cirrus-and-bochus.patch 

-------------------------------------------------------------------
Thu Jul  3 09:54:37 UTC 2014 - dvaleev@suse.com

- Track occupied memory by GRUB2 so it can be released on exit
  bnc#885026 (grub2-ppc64le-memory-map.patch) 

-------------------------------------------------------------------
Thu Jul  3 07:46:30 UTC 2014 - mchang@suse.com

- change description of bootable snapshot to start bootloader from
  a read-only snapshot and exclude read-write snapshots from the list
  (bnc#878528)
- refresh grub2-snapper-plugin.sh

-------------------------------------------------------------------
Thu Jul  3 07:39:03 UTC 2014 - mchang@suse.com

- add grub.xen config searching path on boot partition (bnc#884828)
- add linux16 and initrd16 to grub.xen (bnc#884830)
- added patches:
  * grub2-xen-linux16.patch

-------------------------------------------------------------------
Mon Jun 30 14:35:08 UTC 2014 - dvaleev@suse.com

- VLAN tag support (FATE#315753)
   0001-Add-bootargs-parser-for-open-firmware.patch
   0002-Add-Virtual-LAN-support.patch

-------------------------------------------------------------------
Fri Jun 20 19:41:57 UTC 2014 - jeffm@suse.com

- grub2: use stat instead of udevadm for partition lookup (bnc#883635)
  * Added grub2-use-stat-instead-of-udevadm-for-partition-lookup.patch

-------------------------------------------------------------------
Mon Jun 16 13:39:42 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * fix dracut module for grub2.  (bnc#879136)
- grub2-s390x-03-output-7-bit-ascii.patch:
  * improve recognition of control sequences in line-mode.

-------------------------------------------------------------------
Fri Jun 13 11:14:59 UTC 2014 - jack@suse.cz

- xfs V5 superblock support (bnc#880166)

- added patches:
  * grub2-xfs-Add-helper-for-inode-size.patch
  * grub2-xfs-Fix-termination-loop-for-directory-iteration.patch
  * grub2-xfs-Convert-inode-numbers-to-cpu-endianity-immediate.patch
  * grub2-xfs-V5-filesystem-format-support.patch

-------------------------------------------------------------------
Tue Jun  3 13:48:52 UTC 2014 - dvaleev@suse.com

- Disable video support on Power (bnc#877142) 
- Move grub2-netboot-hang.patch out from ppc patches to generic.
  The patch is valid for all architecures.

- added patches:
  * grub2-ppc64le-disable-video.patch
-------------------------------------------------------------------
Mon Jun  2 13:56:30 UTC 2014 - rw@suse.com

- grub2-efi-xen-chainload.patch:
  * use only one config file per XEN hypervisor version containing
    sections for different kernels.
  * remove previously installed files from ESP.
  * avoid useless duplicates for sym-linked hypervisors.
- grub2-efi-chainloader-root.patch:
  * use device part of chainloader target, if present.  (bnc#871857)

-------------------------------------------------------------------
Tue May 27 07:01:20 UTC 2014 - mchang@suse.com

- grub2-setup-try-fs-embed-if-mbr-gap-too-small.patch
  * try to embed on file system when mbr gap too small (bnc#879271)

-------------------------------------------------------------------
Wed May 21 14:37:32 UTC 2014 - rw@suse.com

- grub2-efi-xen-chainload.patch:
  * add missing whitespace.  (bnc#879148)

-------------------------------------------------------------------
Mon May 19 16:21:51 UTC 2014 - rw@suse.com

- grub2-efi-xen-chainload.patch:
  * use chainloader to boot xen.efi under UEFI.  (bnc#871857)

-------------------------------------------------------------------
Fri May 16 12:57:39 UTC 2014 - rw@suse.com

- remove architecture-specific boot directory for s390x-emu
  in favor of 's390-tools'.

-------------------------------------------------------------------
Thu May 15 16:55:41 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * use 'showconsole' to determine console device.  (bnc#876743)
- grub2-s390x-03-output-7-bit-ascii.patch:
  * fix detection of terminal type now accessible.

-------------------------------------------------------------------
Thu May 15 05:17:42 UTC 2014 - mchang@suse.com

- s390x snapper rollback support
  * refresh grub2-snapper-plugin.sh
  * refresh grub2-btrfs-05-grub2-mkconfig.patch
- create only hypervisor pointed by /boot/xen.gz symlink (bnc#877040)
  * refresh grub2-fix-Grub2-with-SUSE-Xen-package-install.patch
  * refresh grub2-fix-menu-in-xen-host-server.patch

-------------------------------------------------------------------
Wed Apr 30 14:54:51 UTC 2014 - rw@suse.com

- package architecture-specific boot directory for s390x-emu. (bnc#873951)
- grub2-s390x-04-grub2-install.patch:
  * support 'xz' initrd compression.  (bnc#874155)

-------------------------------------------------------------------
Wed Apr 30 04:43:14 UTC 2014 - mchang@suse.com

- refresh grub2-snapper-plugin.sh, suppress "XPath set is empty"
  warning message (bnc#866944)

-------------------------------------------------------------------
Mon Apr 28 09:51:53 UTC 2014 - dvaleev@suse.com

- grub can busy-loop and hang while network booting, when the network
   has some fair amount of acitivity. This is because grub's net module
   sniffs the network for packets, and busy-loops in receive_packets()
   till it finds network packet of type ip or ipv6.
   During this period grub will not respond to any user input, thus
   hanging up the system. (bnc#870613)
   grub2-netboot-hang.patch fixes it

-------------------------------------------------------------------
Mon Apr 21 09:11:33 UTC 2014 - mchang@suse.com

- refresh grub2-linux.patch
  * fix xen and native entries differ in grub.cfg (bnc#872014)
- add grub2-getroot-support-NVMe-device-names.patch
  * fix booting from NVMe device enters GRUB rescue (bnc#873132)
- add grub2-getroot-treat-mdadm-ddf-as-simple-device.patch
  * fix grub2-install error on ddf md device (bnc#872360)

-------------------------------------------------------------------
Mon Apr 14 12:44:40 UTC 2014 - rw@suse.com

- grub2-efi-HP-workaround.patch:
  * try to read config from all-uppercase prefix as last resort.
    (bnc#872503)

-------------------------------------------------------------------
Fri Apr 11 06:45:27 UTC 2014 - mchang@suse.com

- export btrfs_relative_path correctly 
  * refresh grub2-btrfs-03-follow_default.patch
  * refresh grub2-btrfs-04-grub2-install.patch

-------------------------------------------------------------------
Thu Apr 10 10:23:59 UTC 2014 - dvaleev@suse.com

- Add powerpc-utils to grub2-powerpc-ieee1275's requires

-------------------------------------------------------------------
Thu Apr 10 07:07:10 UTC 2014 - mchang@suse.com

- add grub2-efinet-reopen-SNP-protocol-for-exclusive-use-by-grub.patch
  (bnc#871555)
- add grub2-xen-legacy-config-device-name.patch (bnc#863821)

-------------------------------------------------------------------
Wed Apr  9 10:31:45 UTC 2014 - mchang@suse.com

- snapper rollback support, improve the bootloader installation
  without wrapper script, reduce the detours on different architecture
  and rename related patches properly 
* rename 0002-btrfs-add-ability-to-boot-from-subvolumes.patch to
  grub2-btrfs-01-add-ability-to-boot-from-subvolumes.patch
* rename 0004-btrfs-export-subvolume-envvars.patch to
  grub2-btrfs-02-export-subvolume-envvars.patch
* rename SUSE_BTRFS_SNAPSHOT_BOOTING.patch to
  grub2-btrfs-05-grub2-mkconfig.patch
* rename btrfs_follow_default.patch to
  grub2-btrfs-03-follow_default.patch
* add grub2-btrfs-04-grub2-install.patch
* delete 0003-cmdline-add-envvar-loader_cmdline_append.patch
* remove suse_btrfs_grub2_install.sh
* refresh grub2-snapper-plugin.sh, export extra_cmdline

-------------------------------------------------------------------
Mon Apr  7 11:04:06 UTC 2014 - dvaleev@suse.com

- Fix grub2 timeout stop counting on ppc64le (bnc#869166)

- added patches:
  * grub2-timout.patch

-------------------------------------------------------------------
Tue Apr  1 04:52:53 UTC 2014 - mchang@suse.com

- add Recommends to libburnia-tools (bnc#812681)

-------------------------------------------------------------------
Mon Mar 31 12:42:00 UTC 2014 - rw@suse.com

- Document peculiarities of s390 terminals in 'README.ibm3215'.
- grub2-s390x-02-kexec-module-added-to-emu.patch:
  * Improve exit message for dry-run (and cleanup).
- grub2-s390x-03-output-7-bit-ascii.patch:
  * Fix handling of '^C' and solitary '^'.  (bnc#867258)
  * Exit properly with mode-reset.
- grub2-s390x-04-grub2-install.patch:
  * Install helper script as '/usr/sbin/grub2-zipl-setup'.
  * Console mode may be controlled from config file.  (bnc#868909)
- grub2-s390x-05-grub2-mkconfig.patch:
  * Add 'conmode=' to command-line, if configured.  (bnc#868909)

-------------------------------------------------------------------
Mon Mar 31 10:48:39 UTC 2014 - mchang@suse.com

- snapper rollback support (fate#317062)
  * add btrfs_follow_default.patch
  * add suse_btrfs_grub2_install.sh
  * add 80_suse_btrfs_snapshot
  * add SUSE_BTRFS_SNAPSHOT_BOOTING.patch
  * refresh grub2-snapper-plugin.sh

-------------------------------------------------------------------
Fri Mar 28 02:38:07 UTC 2014 - mchang@suse.com

- add grub2-x86_64-xen subpackage (bnc#863821)

-------------------------------------------------------------------
Wed Mar 26 14:37:18 UTC 2014 - dvaleev@suse.com

- ieee1275: check for IBM pseries emulated machine (bnc#869964) 

- added patches:
  * grub2-ppc64-build-ppc64-32bit.patch
-------------------------------------------------------------------
Wed Mar 26 12:21:55 UTC 2014 - dvaleev@suse.com

- Build ppc64 as 32bit

- added patches:
  * grub2-ppc64-build-ppc64-32bit.patch
-------------------------------------------------------------------
Wed Mar 26 12:03:21 UTC 2014 - dvaleev@suse.com

- Rename PowerPC patches so it will have architecture in it's name 

- added patches:
  * grub2-ppc64le-01-Add-Little-Endian-support-for-Power64-to-the-build.patch
  * grub2-ppc64le-02-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch
  * grub2-ppc64le-03-disable-creation-of-vsx-and-altivec-instructions.patch
  * grub2-ppc64le-04-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * grub2-ppc64le-05-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * grub2-ppc64le-06-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * grub2-ppc64le-07-Add-IEEE1275_ADDR-helper.patch
  * grub2-ppc64le-08-Fix-some-more-warnings-when-casting.patch
  * grub2-ppc64le-09-Add-powerpc64-types.patch
  * grub2-ppc64le-10-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * grub2-ppc64le-11-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * grub2-ppc64le-12-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * grub2-ppc64le-13-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * grub2-ppc64le-14-Add-powerpc64-ieee1275-trampoline.patch
  * grub2-ppc64le-15-Add-64bit-support-to-powerpc-startup-code.patch
  * grub2-ppc64le-16-Add-grub_dl_find_section_addr.patch
  * grub2-ppc64le-17-Add-ppc64-relocations.patch
  * grub2-ppc64le-18-ppc64-doesn-t-need-libgcc-routines.patch
  * grub2-ppc64le-19-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * grub2-ppc64le-20-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * grub2-ppc64le-21-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * grub2-ppc64le-22-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * grub2-ppc64le-23-grub-segfaults-if-initrd-is-specified-before-specify.patch
- removed patches:
  * 0001-Add-Little-Endian-support-for-Power64-to-the-build.patch
  * 0002-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch
  * 0003-disable-creation-of-vsx-and-altivec-instructions.patch
  * 0004-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * 0005-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * 0006-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * 0007-Add-IEEE1275_ADDR-helper.patch
  * 0008-Fix-some-more-warnings-when-casting.patch
  * 0009-Add-powerpc64-types.patch
  * 0010-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * 0011-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * 0012-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * 0013-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * 0014-Add-powerpc64-ieee1275-trampoline.patch
  * 0015-Add-64bit-support-to-powerpc-startup-code.patch
  * 0016-Add-grub_dl_find_section_addr.patch
  * 0017-Add-ppc64-relocations.patch
  * 0018-ppc64-doesn-t-need-libgcc-routines.patch
  * 0019-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * 0020-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * 0020-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * 0021-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * 0022-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * 0023-grub-segfaults-if-initrd-is-specified-before-specify.patch
-------------------------------------------------------------------
Wed Mar 26 11:51:42 UTC 2014 - dvaleev@suse.com

- Require powerpc-utils for grub2-powerpc-ieee1275 package
  (grub2-install calls nvram from it) 

-------------------------------------------------------------------
Tue Mar 18 21:10:59 UTC 2014 - rw@suse.com

- grub2-s390x-03-output-7-bit-ascii.patch:
  * first usable interface on 3215 from initrd.  (bnc#867258)

-------------------------------------------------------------------
Tue Mar 18 06:01:46 UTC 2014 - rw@suse.com

- reflect s390x-specifics in '/etc/default/grub'.  (fate#314213)
- grub2-s390x-02-kexec-module-added-to-emu.patch:
  * boot-attempts are final, except if 'kexec -l' fails.
  * try to restore terminal on exit (via grub_reboot()).
- grub2-s390x-03-output-7-bit-ascii.patch:
  * use less CPU cycles waiting for user.  (bnc#868650)
  * first usable interface on 3215.  (bnc#867258)
  * strip newlines on input for 3270 and 3215.
- grub2-s390x-04-grub2-install.patch:
  * append 'quiet splash=silent' for 'initgrub'-boot.
  * properly check for dracut script during 'grub2-install'.

-------------------------------------------------------------------
Wed Mar  5 20:44:56 UTC 2014 - rw@suse.com

- grub2-s390x-04-grub2-install.patch:
  * refresh initrd by default, prefer running kernel and
    re-zipl despite minor issues.  (bnc#866867, fate#314213)

-------------------------------------------------------------------
Tue Mar  4 22:35:25 UTC 2014 - rw@suse.com

- grub2-s390x-03-output-7-bit-ascii.patch:
  * force terminfo to ASCII.
- grub2-s390x-04-grub2-install.patch:
  * try harder to find root filesystem (incl. subvol-handling)
  * read /etc/sysconfig/bootloader as final fallback
- grub2-s390x-05-grub2-mkconfig.patch:
  * omit subvolume-prefix for platform "emu"
- refresh 0001-script-provide-overridable-root-by-subvol.patch.

-------------------------------------------------------------------
Mon Mar  3 11:41:56 UTC 2014 - rw@suse.com

- build grub2-emu for s390 non-static, with device-mapper support,
  but without grub2-mount and start to move arch-specific parts
  to appropriate sub-packages.  (fate#314213)
- grub2-s390x-02-kexec-module-added-to-emu.patch:
  * introduce '--kexec/-X' to grub2-emu command-line to prevent
    inadvertent system interruption.
  * first give 'systemctl kexec' a chance on '-X' and
    fall back to 'kexec -e' only '-X' is present twice.
- disable grub2-s390x-03-output-7-bit-ascii.patch for now.
- grub2-s390x-04-grub2-install.patch:
  * add 's390x-emu' platform-support to grub2-install.
  * provide all parts to zIPL into a grub2-emu shell,
    including 'zipl.conf'-generator and 'dracut'-scriptlets.
- grub2-s390x-05-grub2-mkconfig.patch:
  * allow 's390x' "image"-files to '10_linux' kernel enumeration.
- refresh 0001-script-provide-overridable-root-by-subvol.patch to
  resolve conflict in util/grub.d/10_linux.in.
- refresh powerpc64le-as-powerpc.patch to resolve conflict
  in configure.ac.

-------------------------------------------------------------------
Mon Mar  3 11:40:21 UTC 2014 - dvaleev@suse.com

- Refresh PowerLE patches 

- added patches:
  * 0001-Add-Little-Endian-support-for-Power64-to-the-build.patch
  * 0003-disable-creation-of-vsx-and-altivec-instructions.patch
  * 0004-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * 0005-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * 0006-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * 0007-Add-IEEE1275_ADDR-helper.patch
  * 0008-Fix-some-more-warnings-when-casting.patch
  * 0009-Add-powerpc64-types.patch
  * 0010-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * 0011-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * 0012-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * 0013-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * 0014-Add-powerpc64-ieee1275-trampoline.patch
  * 0015-Add-64bit-support-to-powerpc-startup-code.patch
  * 0016-Add-grub_dl_find_section_addr.patch
  * 0017-Add-ppc64-relocations.patch
  * 0018-ppc64-doesn-t-need-libgcc-routines.patch
  * 0019-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * 0020-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * 0021-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * 0022-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * 0023-grub-segfaults-if-initrd-is-specified-before-specify.patch
- removed patches:
  * 0001-Add-a-new-architecture-to-the-build-process.patch
  * 0003-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * 0004-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * 0005-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * 0006-Add-IEEE1275_ADDR-helper.patch
  * 0007-Fix-some-more-warnings-when-casting.patch
  * 0008-Add-powerpc64-types.patch
  * 0009-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * 0010-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * 0011-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * 0012-Add-powerpc64-ieee1275-trampoline.patch
  * 0013-Add-64bit-support-to-powerpc-startup-code.patch
  * 0014-Add-grub_dl_find_section_addr.patch
  * 0015-Add-ppc64-relocations.patch
  * 0016-ppc64-doesn-t-need-libgcc-routines.patch
  * 0017-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * 0018-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * 0019-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * 0021-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * 0022-grub-segfaults-if-initrd-is-specified-before-specify.patch
  * 0023-Power7-cannot-handle-VSX-instructions-correctly.-It-.patch
  * powerpc-novsx-noaltivec.patch
  * powerpc64le-as-powerpc.patch
- modified patches:
  * 0002-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch

-------------------------------------------------------------------
Fri Feb 28 01:14:10 UTC 2014 - dvaleev@suse.com

- build with -mno-vsx and -mno-altivec on powerpc

- added patches:
  * powerpc-novsx-noaltivec.patch

-------------------------------------------------------------------
Thu Feb 27 10:42:25 UTC 2014 - dvaleev@suse.com

- The following patches enable grub to support
64bit Little Endian Power architecture. (bnc#865913)

Anton Blanchard (12):
  Add IEEE1275_ADDR helper
  Fix some more warnings when casting.
  Add powerpc64 types
  Fix warnings when building powerpc linux loader 64bit
  Fix powerpc setjmp/longjmp 64bit issues
  Add powerpc64 ieee1275 trampoline
  Add 64bit support to powerpc startup code
  Add grub_dl_find_section_addr
  Add ppc64 relocations
  ppc64 doesn't need libgcc routines
  Use FUNC_START/FUNC_END for powerpc function definitions
  powerpc64 is not necessarily BigEndian anymore! :)

Ram Pai (11):
  Add a new architecture to the build process
  Build grub as O1 until we add savegpr and restgpr routines
  powerpc64 LE's linker knows how to handle the undefined symbol .TOC.  
      in grub modules. So just ignore that symbol during build.
  grub-install can now recognize and install a LE grub boot loader
  set the ABI version to 0x02 in the e_flag of the PPC64LE ELF image.
  GRUB_ELF_R_PPC_* processing is applicable only for 32 bit bootloader.
  .TOC. symbol is special in ppc64le . It maps to the address of the
    .toc     section.
  the .toc section in powerpc64le modules are sometimes not aligned on a
    four     byte boundary. This fails the module linker especially when
    processing     R_PPC64_TOC16_LO_DS, since the addresses are expected
    to be aligned on 4byte     boundary.
  all parameter to firmware calls should to be BigEndian and the results
        should be CPU endian.
  grub segfaults if initrd is specified before specifying the kernel.   
     The problem is the initrd module sees that kernel is not specified 
       and takes the fail path. In the fail path it checks if anything
    has     be malloc'ed. Unfortunately the variable that it looks to
    check for     is a uninitialized stack variable. The stack variable
    can incorrectly     indicate something is malloced, which leads the
    module to free some     unallocated memory. This patch fixes the
    problem by initializing the     stack variable.
  Power7 cannot handle VSX instructions correctly. It segfaults.    
    This patch is applicable only for power7 systems.

Thomas Falcon (1):
  Add a new architecture to the build process

Tomohiro B Berry (1):
  Add a new architecture to the build process

- added patches:
  * 0001-Add-a-new-architecture-to-the-build-process.patch
  * 0002-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch
  * 0003-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * 0004-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * 0005-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * 0006-Add-IEEE1275_ADDR-helper.patch
  * 0007-Fix-some-more-warnings-when-casting.patch
  * 0008-Add-powerpc64-types.patch
  * 0009-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * 0010-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * 0011-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * 0012-Add-powerpc64-ieee1275-trampoline.patch
  * 0013-Add-64bit-support-to-powerpc-startup-code.patch
  * 0014-Add-grub_dl_find_section_addr.patch
  * 0015-Add-ppc64-relocations.patch
  * 0016-ppc64-doesn-t-need-libgcc-routines.patch
  * 0017-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * 0018-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * 0019-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * 0020-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * 0021-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * 0022-grub-segfaults-if-initrd-is-specified-before-specify.patch
  * 0023-Power7-cannot-handle-VSX-instructions-correctly.-It-.patch
- removed patches:
  * grub2-powerpc-libgcc.patch
  * grub2-ppc64le-core-bigendian.patch
  * grub2-ppc64le-platform.patch

-------------------------------------------------------------------
Thu Feb 27 09:26:49 UTC 2014 - jjolly@suse.com

- kexec performed as linux/initrd/boot under emu environment

-------------------------------------------------------------------
Thu Feb 27 04:30:07 UTC 2014 - mchang@suse.com

- grub2-snapper-plugin: fix important snapshots are not marked as such
  in grub2 menu, also display the snapshot entries in the format
  "important distribution version (kernel_version, timestamp, pre/post)"
  (bnc#864842)

-------------------------------------------------------------------
Tue Feb 25 06:41:41 UTC 2014 - jjolly@suse.com

- Fixed output on s390 3270 terminal. Strictly serial on s390 now
- kexec command added for emu platform

-------------------------------------------------------------------
Mon Feb 24 07:28:42 UTC 2014 - mchang@suse.com

- refresh grub2-fix-menu-in-xen-host-server.patch (bnc#859361)
  * prevent 10_linux from booting xen kernel without pv_opt support
    on systems other than xen PV domU guest   
  * prevent 20_linux_xen.in from setting up nested virt running from
    Xen domU
- refresh grub2-fix-Grub2-with-SUSE-Xen-package-install.patch
  * adjust accordingly 

-------------------------------------------------------------------
Thu Feb 20 14:43:21 UTC 2014 - jw@suse.com

- updating grub2-once
  - added --list switch.
  - improved --help and error handling.

-------------------------------------------------------------------
Tue Feb 11 03:02:21 UTC 2014 - mchang@suse.com

- add Supplements: packageand(snapper:grub2) in grub2-snapper-plugin
  to install it while both snapper and grub2 are installed

-------------------------------------------------------------------
Wed Feb  5 04:33:55 UTC 2014 - mchang@suse.com

- add grub2-snapper-plugin.sh (fate#316232)
  * grub2's snapper plugin for advanced btrfs snapshot menu management
  * package as grub2-snapper-plugin.noarch
- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
  * when booting btrfs snapshots disabled, deleting snapshot master config
    if it's not customized

-------------------------------------------------------------------
Fri Jan 31 14:42:26 UTC 2014 - dvaleev@suse.com

- Enable grub2 for PowerPC LE (ppc64le)
- Add ppc64le to exclusive arches
- Don't require gcc-32bit (PowerLE don't have 32bit toolchain)

- added patches:
  * grub2-powerpc-libgcc.patch
     Provide 32bit libgcc functions for PowerLE

  * grub2-ppc64le-core-bigendian.patch
     Build grub kernel and images as BE on ppc64le (BL is BE there)

  * grub2-ppc64le-platform.patch
     Enable ppc64le platform

-------------------------------------------------------------------
Fri Jan 24 13:48:13 CET 2014 - jjolly@suse.com

- Add changes to allow build for s390x arch: added
  grub2-s390x-01-Changes-made-and-files-added-in-order-to-allow-s390x.patch

-------------------------------------------------------------------
Wed Jan 22 05:19:35 UTC 2014 - mchang@suse.com

- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
* Fix bootable snapshots not found while root is on Btrfs subvolume
  (bnc#859587)
* Create missing slave config in /.snapshots/<num>/
* Prefix with SUSE_ for related options

-------------------------------------------------------------------
Fri Jan 17 06:23:04 UTC 2014 - mchang@suse.com

- refresh 0001-script-provide-overridable-root-by-subvol.patch
* Introduce $boot_prefix for setting prefix on seeking other /boot
  directory.
- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
* Support existing snapshots by creating their missing slave configs.
* Temporarily default to disable this feature until receiving more
  tests from QA.
* Introduce GRUB_ENABLE_CUSTOM_SNAPSHOT_SUBMENU to allow custom
  submenu for listing snapshots rather than the default one.

-------------------------------------------------------------------
Wed Jan 15 15:46:31 UTC 2014 - arvidjaar@gmail.com

- package autoiso.cfg and osdetect.cfg as documentation
- add 0001-look-for-DejaVu-also-in-usr-share-fonts-truetype.patch -
  fix configure test for DejaVu font
- add dejavu-fonts to BR (needed to build starfield theme)
- package starfield theme as grub2-branding-upstream
- add grub2-use-DejaVuSansMono-for-starfield-theme.patch - use fixed width
  font for starfield theme
- clarify that grub2 subpackage contains only user space tools

-------------------------------------------------------------------
Wed Jan 15 06:18:10 UTC 2014 - mchang@suse.com

- add new patches for booting btrfs snapshot (fate#316522) (fate#316232)
  * 0001-script-provide-overridable-root-by-subvol.patch
  * 0002-script-create-menus-for-btrfs-snapshot.patch
 
-------------------------------------------------------------------
Fri Dec 27 16:36:40 UTC 2013 - arvidjaar@gmail.com

- update to grub-2.02 beta2
  * drop upstream patches
    - grub2-fix-unquoted-string-in-class.patch (different)
    - grub2-cdpath.patch (modified)
    - grub2-fix-parsing-of-short-LVM-PV-names.patch
    - grub2-fix-descriptor-leak-in-grub_util_is_imsm.patch
    - grub2-install-opt-skip-fs-probe.patch (file it patched no more exists,
      functionality included upstream)
    - grub2-fix-x86_64-efi-startup-stack-alignment.patch
    - grub2-fix-x86_64-efi-callwrap-stack-alignment.patch
    - 0001-Fix-build-with-FreeType-2.5.1.patch
  * rediff
    - grub2-linux.patch
    - use-grub2-as-a-package-name.patch (do not patch generated configure)
    - grub2-GRUB_CMDLINE_LINUX_RECOVERY-for-recovery-mode.patch
    - grub2-fix-locale-en.mo.gz-not-found-error-message.patch (upstream added
      explicit exclusion for en_* language only; I do not see reason to stop
      with error in this case for any language).
    - not-display-menu-when-boot-once.patch
    - grub2-secureboot-provide-linuxefi-config.patch
    - grub2-pass-corret-root-for-nfsroot.patch
    - 0002-btrfs-add-ability-to-boot-from-subvolumes.patch
    - grub2-fix-menu-in-xen-host-server.patch 
    - grub2-fix-Grub2-with-SUSE-Xen-package-install.patch
    - grub2-secureboot-add-linuxefi.patch
    - grub2-secureboot-no-insmod-on-sb.patch 
    - rename-grub-info-file-to-grub2.patch
  * drop Makefile.util.am and Makefile.core.am, they are now generated
    during build
  * call ./autogen.sh again now when it does not need autogen anymore; drop
    autoreconf call, it is called by autogen.sh
  * drop 0001-btrfs-rename-skip_default-to-follow_default.patch - is not
    needed anymore due to upstream changes
  * package /usr/bin/grub2-file, /usr/bin/grub2-syslinux2cfg and
    /usr/sbin/grub2-macbless
  * use grub-install --no-bootsector instead of --grub-setup=/bin/true
    in postinstall script

-------------------------------------------------------------------
Tue Dec 17 07:20:33 UTC 2013 - mchang@suse.com

- add new patches for booting btrfs snapshot (fate#316522) (fate#316232)
  * 0001-btrfs-rename-skip_default-to-follow_default.patch
  * 0002-btrfs-add-ability-to-boot-from-subvolumes.patch
  * 0003-cmdline-add-envvar-loader_cmdline_append.patch
  * 0004-btrfs-export-subvolume-envvars.patch

-------------------------------------------------------------------
Tue Dec 10 19:13:53 UTC 2013 - arvidjaar@gmail.com

- add patch 0001-Fix-build-with-FreeType-2.5.1.patch - fix build with
  freetype2 >= 2.5.1 (backport from fd0df6d098b1e6a4f60275c48a3ec88d15ba1fbb)

-------------------------------------------------------------------
Sun Dec  1 13:10:23 UTC 2013 - arvidjaar@gmail.com

- reset executable bits on *module, *.exec and *.image files. They are not
  executable.

-------------------------------------------------------------------
Fri Nov 22 07:12:16 UTC 2013 - glin@suse.com

- add grub2-fix-x86_64-efi-startup-stack-alignment.patch and
  grub2-fix-x86_64-efi-callwrap-stack-alignment.patch: fix the
  stack alignment of x86_64 efi. (bnc#841426)

-------------------------------------------------------------------
Wed Sep 11 07:17:07 UTC 2013 - mchang@suse.com

- use new update-bootloader option --reinit to install and update
  bootloader config
- refresh grub2-secureboot-no-insmod-on-sb.patch to fobid module
  loading completely.

-------------------------------------------------------------------
Mon Sep  9 09:22:34 UTC 2013 - lnussel@suse.de

- replace openSUSE UEFI certificate with new 2048 bit certificate.

-------------------------------------------------------------------
Sat Jul 27 10:12:36 UTC 2013 - arvidjaar@gmail.com

- add grub2-fix-parsing-of-short-LVM-PV-names.patch - fix PV detection in
  grub-probe when PV name is less than 10 charaters
- add grub2-fix-descriptor-leak-in-grub_util_is_imsm.patch - fix decriptor
  leak which later caused LVM warnings during grub-probe invocation
- remove --enable-grub-emu-usb - it is not needed on physical platform

-------------------------------------------------------------------
Tue Jul  9 10:54:41 UTC 2013 - mchang@suse.com

- refresh grub2-fix-menu-in-xen-host-server.patch: In domU we
  have to add xen kernel to config. (bnc#825528) 

-------------------------------------------------------------------
Wed Jun 26 17:02:08 UTC 2013 - elchevive@opensuse.org

- updated existent translations and include new ones
	(es, lt, pt_BR, sl, tr)

-------------------------------------------------------------------
Sun Jun 16 12:42:33 UTC 2013 - arvidjaar@gmail.com

- update to current upstream trunk rev 5042
  * drop upstream patches
    - grub2-correct-font-path.patch
    - grub2-fix-mo-not-copied-to-grubdir-locale.patch
    - grub2-stdio.in.patch
    - grub2-fix-build-error-on-flex-2.5.37.patch
    - grub2-quote-messages-in-grub.cfg.patch
    - 30_os-prober_UEFI_support.patch
    - grub2-fix-enumeration-of-extended-partition.patch
    - grub2-add-device-to-os_prober-linux-menuentry.patch
    - grub2-fix-tftp-endianness.patch
    - efidisk-ahci-workaround
    - grub2-grub-mount-return-failure-if-FUSE-failed.patch
  * rediff
    - rename-grub-info-file-to-grub2.patch
    - grub2-linux.patch
    - use-grub2-as-a-package-name.patch
    - grub2-iterate-and-hook-for-extended-partition.patch
    - grub2-secureboot-add-linuxefi.patch 
    - grub2-secureboot-no-insmod-on-sb.patch
    - grub2-secureboot-chainloader.patch
  * add
    - grub2-linguas.sh-no-rsync.patch
      + disable rsync in linguas.sh so it can be used during RPM build
      + disable auto-generated catalogs, they fail at the moment due to
        missing C.UTF-8 locale
  * update Makefile.util.am and Makefile.core.am
  * grub2-mknetdir is now in /usr/bin
  * generate po/LINGUAS for message catalogs using distributed linguas.sh
  * remove po/stamp-po during setup to trigger message catalogs rebuild
  * package bootinfo.txt on PPC (used by grub2-mkrescue)

-------------------------------------------------------------------
Sat Apr 13 08:48:52 UTC 2013 - arvidjaar@gmail.com

- BuildRequires: help2man to generate man pages and package them too

-------------------------------------------------------------------
Fri Apr  5 17:01:42 UTC 2013 - arvidjaar@gmail.com

- add grub2-secureboot-use-linuxefi-on-uefi-in-os-prober.patch (bnc#810912)
  * use linuxefi in 30_os-prober if secure boot is enabled

-------------------------------------------------------------------
Wed Apr  3 17:56:20 UTC 2013 - arvidjaar@gmail.com

- update rename-grub-info-file-to-grub2.patch
  * do not rename docs/grub2.texi here, do it in %%prep (we do it there
    conditionally already). It simplifies patch refreshing using quilt
    which does not support file rename.

-------------------------------------------------------------------
Wed Apr  3 06:55:52 UTC 2013 - mchang@suse.com

- refresh grub2-secureboot-chainloader.patch: Fix wrongly aligned
  buffer address (bnc#811608) 

-------------------------------------------------------------------
Thu Mar 28 02:57:47 UTC 2013 - mchang@suse.com

- package Secure Boot CA file as /usr/lib64/efi/grub.der which
  could be used to verify signed image from build server
- add openSUSE-UEFI-CA-Certificate.crt, openSUSE Secure Boot CA
- add SLES-UEFI-CA-Certificate.crt, SUSE Linux Enterprise Secure
  Boot CA

-------------------------------------------------------------------
Mon Mar 25 17:37:59 UTC 2013 - dvaleev@suse.com

- extraconfigure macro is not defined on ppc 

-------------------------------------------------------------------
Sat Mar 23 18:31:07 UTC 2013 - arvidjaar@gmail.com

- corretly set chainloaded image device handle in secure boot mode (bnc#809038)

-------------------------------------------------------------------
Wed Mar 13 11:30:52 UTC 2013 - mchang@suse.com
  
- remove all compatible links in grub2-efi as now all concerned 
  utilities are fixed
- superseding grub2-efi by grub2-x86_64-efi and grub2-i386-efi on
  x86_64 and ix86 respectively
- make grub2-x86_64-efi and grub2-i386-efi providing grub2-efi
  capability to not break package dependency
- handle upgrade from 12.2 by preseving grubenv and custom.cfg to
  new directory /boot/grub2, rename /boot/grub2-efi to
  /boot/grub2-efi.rpmsave to avoid confusion.

-------------------------------------------------------------------
Mon Mar 11 16:02:26 UTC 2013 - arvidjaar@gmail.com

- move post scripts into corresponding subpackages to ensure they are
  run after updated binaries are installed. Currently it may happen
  that update-bootlader picks up old binaries.
- move requires for perl-Bootloader to target subpackages. Make sure
  efi requires minimal version that supports /boot/grub2.
- add requires(post) to force order of installation: grub2 => grub2-arch
  => grub2-efi
- split efi post in two parts. One that updates configuration and is part
  of grub2-efiarch and second that migrates settings and is part of
  grub2-efi. Only custom.cfg and grubenv may need migration. device.map
  is not relevant for EFI and new grub.cfg had been created at this point.

-------------------------------------------------------------------
Mon Mar 11 06:52:58 UTC 2013 - mchang@suse.com

- add grub2-fix-tftp-endianness.patch from upstream (bnc#808582)
- add efinet and tftp to grub.efi (bnc#808582)

-------------------------------------------------------------------
Thu Mar  7 15:39:50 UTC 2013 - seife+obs@b1-systems.com

- convert spec file to UTF-8

-------------------------------------------------------------------
Thu Mar  7 08:12:57 UTC 2013 - mchang@suse.com

- add lvm to grub.efi (bnc#807989)
- add loadenv to grub.efi (bnc#807992)

-------------------------------------------------------------------
Mon Mar  4 16:48:32 UTC 2013 - arvidjaar@gmail.com

- grub2-grub-mount-return-failure-if-FUSE-failed.patch - return error
  if fuse_main failed (bnc#802983)

-------------------------------------------------------------------
Mon Feb 25 13:31:31 UTC 2013 - fcrozat@suse.com

- Fix build for SLES 11.

-------------------------------------------------------------------
Tue Feb 19 15:38:04 UTC 2013 - duwe@suse.com

   Fix up bogus items from the previous merge:
 - efi_libdir = _libdir = /usr/lib
 - package /usr/lib/grub2 dir only once
 - move grub.efi to /usr/lib/grub2/%{grubefiarch}/
 - create a symlink so that scripts can find it there.

-------------------------------------------------------------------
Thu Feb 14 11:42:40 UTC 2013 - duwe@suse.com

- merge internal+external BS changes into superset spec file, 
  remove obsolete dependencies
- merge SLES+openSUSE patches, restrict "grub-efi" to 12.2
- add efidisk-ahci-workaround (bnc#794674)
- fix unquoted-string-in-class.patch (bnc#788322)

-------------------------------------------------------------------
Fri Feb  8 01:58:22 UTC 2013 - mchang@suse.com

- adapt to pesign-obs-integration changes

-------------------------------------------------------------------
Thu Feb  7 10:38:42 UTC 2013 - mchang@suse.com

- grub.efi signing on build server.

-------------------------------------------------------------------
Thu Jan 31 16:18:56 UTC 2013 - duwe@suse.com

- switch to out of source / subdir build

-------------------------------------------------------------------
Wed Jan 30 07:29:29 UTC 2013 - mchang@suse.com

- sync from SLE-11 SP3 to date
- set empty prefix to grub.efi for looking up in current directory
- grub2-cdpath.patch: fix the grub.cfg not found when booting from
  optical disk
- put grub.efi in grub2's source module directory
- create links in system's efi directory to grub.efi
- arvidjaar: do not overwrite device path in grub2-cdpath.patch

-------------------------------------------------------------------
Wed Jan 30 04:36:45 UTC 2013 - arvidjaar@gmail.com

- remove obsolete reference to /boot/grub2-efi and /usr/sbin/grub2-efi
  from grub2-once
- add GRUB_SAVEDFAULT description to /etc/default/grub

-------------------------------------------------------------------
Tue Jan 29 02:42:28 UTC 2013 - mchang@suse.com

- set empty prefix to grub.efi for looking up in current directory
- remove grubcd.efi, as grub.efi can now be used for cdrom booting

-------------------------------------------------------------------
Mon Jan 28 08:05:52 CET 2013 - snwint@suse.de

- add fat module to grubcd
- explicitly set empty prefix to get grub to set $prefix to the currrent
  directory

-------------------------------------------------------------------
Fri Jan 18 07:39:18 UTC 2013 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- add grub2-secureboot-chainloader.patch, which expands the efi
  chainloader to be able to verify images via shim lock protocol.

-------------------------------------------------------------------
Fri Jan 18 06:24:57 UTC 2013 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485).
- update for cdrom boot support.
- grub2-cdpath.patch: fix the grub.cfg not found when booting from
  optical disk.
- grubcd.efi: the efi image used for optial disk booting, with
  reduced size and $prefix set to /EFI/BOOT.

-------------------------------------------------------------------
Tue Jan  8 08:09:01 UTC 2013 - mchang@suse.com

- add grub2-fix-unquoted-string-in-class.patch (bnc#788322)

-------------------------------------------------------------------
Tue Jan  8 07:09:47 UTC 2013 - arvidjaar@gmail.com

- add grub2-add-device-to-os_prober-linux-menuentry.patch (bnc#796919)

-------------------------------------------------------------------
Sun Jan  6 18:54:54 UTC 2013 - arvidjaar@gmail.com

- add patch grub2-fix-enumeration-of-extended-partition.patch to
  fix enumeration of extended partitions with non-standard EBR (bnc#779534)

-------------------------------------------------------------------
Fri Jan  4 10:29:58 UTC 2013 - arvidjaar@gmail.com

- add support for chainloading another UEFI bootloader to
  30_os-prober (bnc#775610)

-------------------------------------------------------------------
Fri Dec 21 04:18:06 UTC 2012 - mchang@suse.com

- put 32-bit grub2 modules to /usr/lib/grub2
- put 64-bit grub2 modules to /usr/lib64/grub2 (x86_64-efi)
- put grub.efi to /usr/lib64/efi(x86_64) or /usr/lib/efi(i586)

-------------------------------------------------------------------
Tue Dec 18 03:43:38 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- add grub2-secureboot-chainloader.patch, which expands the efi
  chainloader to be able to verify images via shim lock protocol.

-------------------------------------------------------------------
Fri Nov 30 06:39:15 UTC 2012 - mchang@suse.com

- replace %{sles_version} by %{suse_version} 
- use correct product name

-------------------------------------------------------------------
Mon Nov 26 08:26:10 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- added secureboot patches which introduces new linuxefi module
  that is able to perform verifying signed images via exported
  protocol from shim. The insmod command will not function if
  secure boot enabled (as all modules should built in grub.efi
  and signed).
  - grub2-secureboot-add-linuxefi.patch
  - grub2-secureboot-use-linuxefi-on-uefi.patch
  - grub2-secureboot-no-insmod-on-sb.patch
  - grub2-secureboot-provide-linuxefi-config.patch
- Makefile.core.am : support building linuxefi module
- Make grub.efi image that is with all relevant modules incorporated
  and signed, it will be the second stage to the shim loader which
  will verified it when secureboot enabled.
- Make grub.efi's path to align with shim loader's default loader
  lookup path.
- The changes has been verified not affecting any factory instalation,
  but will allow us to run & test secure boot setup manually with shim.

-------------------------------------------------------------------
Thu Nov 22 07:01:31 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- In SLE-11 SP3, don't include any other architecture binaries
  except EFI, so we split packages by architecture binaries to
  meet the requirement.
  - grub2 : common utilties and config etc
  - grub2-efi : provide compatibilty to grub2-efi package
  - grub2-i386-pc : binaries for x86 legacy pc firmware 
  - grub2-i386-efi : binaries for ia32 EFI firmware
  - grub2-x86_64-efi : binaries for x86_64 firmware
  - grub2-powerpc-ieee1275: binaries for powerpc open firmware

-------------------------------------------------------------------
Tue Nov 20 16:14:50 UTC 2012 - arvidjaar@gmail.com

- update grub2-quote-messages-in-grub.cfg.patch to use upstream commit

-------------------------------------------------------------------
Mon Nov 19 16:40:25 UTC 2012 - arvidjaar@gmail.com

- quote localized "Loading ..." messages in grub.cfg (bnc#790195)

-------------------------------------------------------------------
Mon Nov  5 08:17:26 UTC 2012 - aj@suse.de

- We really only need makeinfo, so require that one where it exists.

-------------------------------------------------------------------
Thu Nov  1 08:10:12 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- Secure boot support in installer DVD (fate#314489)
- prime support for package on SLE-11 (SP3) 
  - remove buildrequire to libuse and ncurses 32-bit devel packages
    as they are needed by grub-emu which we don't support
  - remove buildrequire to freetype2-devel-32bit as it's not need
    by grub2-mkfont and others
  - buildrequire to xz instead of lzma
  - buildrequire to texinfo instead of makeinfo
  - remove buildrequire to autogen as it's not available in SLE-11
  - add Makefile.util.am Makefile.core.am generated by autogen
  - run autoreconf -vi instead of ./autogen.sh
  - For SLE-11 remove buildrequire to gnu-unifont as it's not
    yet available. Also do not package pf fonts created from it.
  - workaround SLE-11 patch utility not rename file for us
  - add -fno-inline-functions-called-once to CFLAGS to fix build
    error on gcc 4.3.x
  - not require os-prober for SLE-11, as package not yet ready

-------------------------------------------------------------------
Sat Oct 27 05:27:42 UTC 2012 - arvidjaar@gmail.com

- grub2-efi now depends on exact grub2 version

-------------------------------------------------------------------
Fri Oct 25 17:00:35 UTC 2012 - arvidjaar@gmail.com

- build grub2-efi with standard "grub2" prefix (bnc#782891)
  - remove use-grub2-efi-as-a-package-name.patch
  - migrate settings from /boot/grub2-efi to /boot/grub2 in efi post
  - provide some compatibility links grub2-efi-xxx for perl-Bootloader
  - workaround for /boot/grub2-efi linkk and /boot/grub2/grub.cfg
    missing on update from older versions

-------------------------------------------------------------------
Thu Oct 25 05:56:59 UTC 2012 - mchang@suse.com

- add grub2-fix-build-error-on-flex-2.5.37.patch

-------------------------------------------------------------------
Thu Oct 18 16:10:02 UTC 2012 - arvidjaar@gmail.com

- modify patch grub2-iterate-and-hook-for-extended-partition.patch to
  ignore extended partitions other then primary (bnc#785341)

-------------------------------------------------------------------
Wed Sep 26 08:04:48 UTC 2012 - mchang@suse.com

- refresh grub2-fix-locale-en.mo.gz-not-found-error-message.patch
  with the correct fix in upstream bugzilla #35880 by Colin Watson 
  (bnc#771393)

-------------------------------------------------------------------
Fri Sep 21 07:37:53 UTC 2012 - mchang@suse.com

- grub2-fix-locale-en.mo.gz-not-found-error-message.patch (bnc#771393) 

-------------------------------------------------------------------
Wed Sep 19 18:54:34 UTC 2012 - arvidjaar@gmail.com

- add 20_memtest86+ (bnc#780622) 

-------------------------------------------------------------------
Tue Sep 18 09:26:29 UTC 2012 - mchang@suse.com

- Fix un-bootable grub2 testing entry in grub's menu.lst (bnc#779370) 
- Not add new grub2 testing entry if it's not found in menu.lst
- Update grub2 stuff and config if there's grub2 entry in menu.lst
- Check for current bootloader as update-bootloader acts on it

-------------------------------------------------------------------
Thu Aug 30 08:00:54 UTC 2012 - mchang@suse.com

- add grub2-fix-Grub2-with-SUSE-Xen-package-install.patch (bnc#774666)
- add grub2-pass-corret-root-for-nfsroot.patch (bnc#774548)

-------------------------------------------------------------------
Mon Aug 20 06:27:23 UTC 2012 - mchang@suse.com

- disable grub2-enable-theme-for-terminal-window.patch to use
  default black background due to current background has poor 
  contrast to the font color (bnc#776244).

-------------------------------------------------------------------
Fri Aug 10 19:31:40 UTC 2012 - jslaby@suse.de

- rename grub2once to grub2-once

-------------------------------------------------------------------
Wed Aug  1 08:01:41 UTC 2012 - mchang@suse.com

- add grub2once (bnc#771587)
- add not-display-menu-when-boot-once.patch

-------------------------------------------------------------------
Sat Jul 28 14:17:56 UTC 2012 - aj@suse.de

- Fix build with missing gets declaration (glibc 2.16)

-------------------------------------------------------------------
Fri Jul 27 13:22:24 UTC 2012 - tittiatcoke@gmail.com

- Add grub2-enable-theme-for-terminal-window.patch (bnc#770107)

-------------------------------------------------------------------
Thu Jul 19 11:03:37 UTC 2012 - mchang@suse.com

- add grub2-fix-menu-in-xen-host-server.patch (bnc#757895)

-------------------------------------------------------------------
Wed Jul 18 08:29:53 UTC 2012 - mchang@suse.com

- add grub2-fix-error-terminal-gfxterm-isn-t-found.patch
- add grub2-fix-mo-not-copied-to-grubdir-locale.patch

-------------------------------------------------------------------
Wed Jul 18 08:12:19 UTC 2012 - aj@suse.de

- We only need makeinfo, not texinfo for building.

-------------------------------------------------------------------
Tue Jul 17 21:12:26 CEST 2012 - jslaby@suse.de

- fix build by adding texinfo to buildrequires.

-------------------------------------------------------------------
Fri Jul  6 08:09:16 UTC 2012 - mchang@suse.com

- grub2-GRUB_CMDLINE_LINUX_RECOVERY-for-recovery-mode.patch. We
  don't run in sigle user mode for recovery, instead use different
  set kernel command line options which could be specified by this 
  GRUB_CMDLINE_LINUX_RECOVERY setting.  

-------------------------------------------------------------------
Wed Jul  4 06:20:23 UTC 2012 - mchang@suse.com

- add use-grub2-efi-as-a-package-name.patch (bnc#769916)

-------------------------------------------------------------------
Fri Jun 29 10:02:08 UTC 2012 - dvaleev@suse.com

- Add configuration support for serial terminal consoles. This will
  set the maximum screen size so that text is not overwritten. 

-------------------------------------------------------------------
Fri Jun 29 09:51:59 UTC 2012 - dvaleev@suse.com

- don't enable grub-emu-usb on ppc ppc641

-------------------------------------------------------------------
Thu Jun 28 09:33:26 CEST 2012 - jslaby@suse.de

- update to 2.0 final
  * see ChangeLog for changes

-------------------------------------------------------------------
Mon Jun 25 11:10:27 UTC 2012 - adrian@suse.de

- enable xz/lzma support for image file generation

-------------------------------------------------------------------
Sun Jun 24 18:10:27 UTC 2012 - jslaby@suse.de

- update to 2.0 beta6, a snapshot from today
  * see ChangeLog for changes

-------------------------------------------------------------------
Fri Jun 22 08:50:12 UTC 2012 - mchang@suse.com

- do not package grub.cfg, as it's generated at runtime and the
  presence of it would confuse pygrub (bnc#768063)

-------------------------------------------------------------------
Wed May 16 06:38:05 UTC 2012 - mchang@suse.com

- fix build error on 12.1 caused by autogen aborts because of
  absence of guile package

-------------------------------------------------------------------
Wed May  2 03:17:21 UTC 2012 - mchang@suse.com

- grub2-automake-1-11-2.patch : fix grub2 build error on newer
  autotools (automake >= 1.11.2)
- call ./autogen.sh

-------------------------------------------------------------------
Thu Apr 19 11:28:44 UTC 2012 - mchang@suse.com

- grub2-probe-disk-mountby.patch : fix grub2-probe fails on
  probing mount-by devices under /dev/disk/by-(id|uuid|path).
  (bnc#757746) 
 
-------------------------------------------------------------------
Thu Mar 29 07:08:38 UTC 2012 - mchang@suse.com

- Add Requires to os-prober as script depends on it for probing
  foreign os (bnc#753229)

-------------------------------------------------------------------
Wed Mar 21 06:58:43 UTC 2012 - mchang@suse.com

- Mark %config(noreplace) to /etc/default/grub (bnc#753246)

-------------------------------------------------------------------
Fri Mar 16 09:21:40 UTC 2012 - aj@suse.de

- Fix build with gcc 4.7 (needs -fno-strict-aliasing for zfs code).

-------------------------------------------------------------------
Tue Mar 13 04:06:06 UTC 2012 - mchang@suse.com

- Fix error in installation to extended partition (bnc#750897)
  add grub2-iterate-and-hook-for-extended-partition.patch
  add grub2-install-opt-skip-fs-probe.patch

-------------------------------------------------------------------
Mon Mar 12 09:34:40 UTC 2012 - tittiatcoke@gmail.com

- Added BuildRequires for gnu-unifont in order to create the 
  necessary fonts for a graphical boot menu.

-------------------------------------------------------------------
Mon Feb 20 13:04:51 UTC 2012 - andrea.turrini@gmail.com

- fixed typos in grub2.spec

-------------------------------------------------------------------
Mon Jan  2 03:16:13 UTC 2012 - mchang@suse.com

- platforms without efi should not specify exclusion of it

-------------------------------------------------------------------
Thu Dec 29 02:31:23 UTC 2011 - mchang@suse.com

- set --target=%{_target_plaform) explicitly to %configure in case
  it wouldn't do that for us implicitly
- when making x86_64-efi image not use i386 target build and keep
  use of x86_64. otherwise it would have error "invalid ELF header"

-------------------------------------------------------------------
Fri Dec  2 16:31:14 UTC 2011 - coolo@suse.com

- add automake as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Mon Nov 28 09:40:44 CET 2011 - jslaby@suse.de

- remove doubly packaged files
- remove INSTALL from docs
- handle duplicate bindir files

-------------------------------------------------------------------
Mon Oct 31 13:08:21 CET 2011 - meissner@suse.de

- make efi exclusion more complete

-------------------------------------------------------------------
Thu Oct 27 08:16:58 UTC 2011 - aj@suse.de

- efibootmgr only exists on x86-64 and ia64.

-------------------------------------------------------------------
Tue Oct 25 08:38:19 UTC 2011 - aj@suse.de

- Add requires from efi subpackage to main package (bnc#72596)

-------------------------------------------------------------------
Mon Oct 24 13:11:39 CEST 2011 - jslaby@suse.de

- update it and pl translations
- cleanup spec file
  * don't package efi files to non-efi package

-------------------------------------------------------------------
Thu Aug 25 14:46:04 UTC 2011 - aj@suse.de

- Fix directory ownership.

-------------------------------------------------------------------
Tue Aug 23 12:46:43 UTC 2011 - aj@suse.de

- Build an efi subpackage [bnc#713595].

-------------------------------------------------------------------
Tue Aug  2 12:10:39 UTC 2011 - dvaleev@novell.com

- enable ppc build
- patch unused-but-set-variable 

-------------------------------------------------------------------
Tue Jul 12 14:03:05 UTC 2011 - aj@suse.de

- Create submenu for all besides primary Linux kernels.
- Only run preun section during package install but not during
  upgrade.

-------------------------------------------------------------------
Tue Jul 12 11:48:08 UTC 2011 - aj@suse.de

- Update README.openSUSE

-------------------------------------------------------------------
Tue May 31 10:42:29 CEST 2011 - jslaby@suse.de

- update translations
- update to 1.99 final
  * See NEWS file for changes

-------------------------------------------------------------------
Sat May  7 12:33:43 CEST 2011 - jslaby@suse.de

- fix build with gcc 4.6
- build in parallel (fixed finally in 1.99)
- add translations from translations project
- update to 1.99-rc2
  * See NEWS file for changes

-------------------------------------------------------------------
Wed Oct 27 16:57:13 CEST 2010 - jslaby@suse.de

- fix vanishing of /boot/grub2/* if /boot/grub/device.map
  doesn't exist

-------------------------------------------------------------------
Mon Oct 25 12:39:11 UTC 2010 - jslaby@suse.de

- add missing " in the default file; add "fi" to grub2-linux.patch

-------------------------------------------------------------------
Mon Oct 11 22:29:27 CEST 2010 - jslaby@suse.de

- repack gz to bz2 (0.5M saving)

-------------------------------------------------------------------
Sat Oct  9 19:16:51 UTC 2010 - aj@suse.de

- Do not output vmlinux if vmlinuz of same version exists.
- Update default grub file.

-------------------------------------------------------------------
Sat Oct  9 13:58:31 UTC 2010 - aj@suse.de

- Add patch grub-1.98-follow-dev-mapper-symlinks.patch from Fedora
  for grub2-probe to detect lvm devices correctly

-------------------------------------------------------------------
Sat Sep 11 23:55:54 CEST 2010 - jslaby@suse.de

- add gettext "requires"

-------------------------------------------------------------------
Sun Mar 14 12:11:53 UTC 2010 - aj@suse.de

- Fix build on x86-64.

-------------------------------------------------------------------
Fri Mar 12 20:39:25 UTC 2010 - aj@suse.de

- Don't build parallel.
- Update to grub 1.98 including:
  * Multiboot on EFI support.
  * Saved default menu entry support, with new utilities `grub-reboot' and
    `grub-set-default'.
  * Encrypted password support, with a new utility `grub-mkpasswd-pbkdf2'.
  * `grub-mkfloppy' removed; use `grub-mkrescue' to create floppy images.

-------------------------------------------------------------------
Fri Feb 12 08:21:10 UTC 2010 - aj@suse.de

- Update to grub 1.97.2:
  * Fix a few 4 GiB limits.
  * Fix license problems with a few BSD headers.
  * Lots of misc bugfixes.

-------------------------------------------------------------------
Wed Dec  9 12:37:18 UTC 2009 - aj@suse.de

- Fix requires.

-------------------------------------------------------------------
Wed Dec  9 11:45:57 UTC 2009 - aj@suse.de

- Mark /etc/default/grub as config file.

-------------------------------------------------------------------
Wed Dec  9 10:45:33 UTC 2009 - aj@suse.de

- Mark root partition rw

-------------------------------------------------------------------
Wed Dec  9 09:11:33 UTC 2009 - aj@suse.de

- New package grub2.