File laptop-mode-tools.changes of Package laptop-mode-tools

Thu May 22 17:52:52 CEST 2014 -

- laptop-mode-1.62-blacklist-usbhid.patch: renamed for consistency
  from blacklist_usbhid.patch

Thu May 22 17:40:30 CEST 2014 -

- laptop-mode-1.62-skip-directories.patch: do not try to read dirs
  inside /etc/laptop-mode/conf.d as if they were regular files

Fri Apr 11 13:39:45 UTC 2014 -

- remove the pm-utils hook and dependency on pm-utils 

Fri Apr 11 12:37:50 UTC 2014 -

- blacklist_usbhid.patch: blacklist the usbhid module for laptop mode

Sun Aug 11 07:46:00 UTC 2013 -

- own all directories in /usr/lib/pm-utils/* to prevent build
  failure in case the pm-utils packaging changes again

Fri Mar  8 18:29:54 UTC 2013 -

- laptop-mode-1.62-customize-installation-of-udev-systemd-files.patch:
  introduce $LIB_D in so we can customize the installation
  of systemd/udev files. 
- drop laptop-mode-1.60-local-can-only-be-used-in-a-function.patch:
  not need it anymore as 1.62 version has the fix.

Mon Feb  4 09:18:41 UTC 2013 -

- update to 1.62:
  * Add systemd support
  * Be specific on what file systems we want to handle. Given the
    wide range of file systems Linux has, we don't want to consider
    them all as not all of them fall under the power saving scenarios.
  * Factor out some common code
  * Do not touch autonegotiation settings. Fiddling with
    auto-negotiation settings can cause more problems and the
    standards expect them to be always on
  * Trim mount point display
  * Organize state/STATE tracking so that we get actual results.
  * cleaner output when asking status.
  * Append to stdout/stderr to avoid truncating file logs
  * Fix spec file for RPM syntax
- fix some rpmlint warnings

Wed Jul 25 09:17:26 UTC 2012 -

- Local variables can only be used in a function.
  add: laptop-mode-1.60-local-can-only-be-used-in-a-function.patch

Fri Apr 13 14:55:47 UTC 2012 -

- update to 1.60:
   * Check for block device's existence. Thanks to Simon Que.
   * Add suspend/resume helper tools: pm-helper, pm-suspend, pm-hibernate.
   * What laptop-mode-tools is stopped from init, also kill polling daemon.
   * Reliable and much better locking mechanics.
   * Make polling dameon lock safe.
   * Make lmt-udev distro neutral. Thanks to Simon Que.
   * Change Intel HDA Audio's default power save timeout to 2 seconds.

Thu Sep 15 12:22:11 CEST 2011 -

- update to 1.59 (excerpt):
  - add support for kernel 3.x (this makes
    laptop-mode-tools-1.57-kernel3.0.patch superfluous)
  - add USB auto-suspend whitelist
  - Check for files instead of kernel version numbers
  - Enable new in-kernel polling mechanism for block devices
    (Debian BTS: #617705, #574867)
  - Add new module nmi-watchdog to handle NMI Watchdog related power
    savings. Thanks to Quentin Denis for the report
  - More minor fixes...

Wed Jul 20 19:25:56 UTC 2011 -

- Support kernel 3.0
- Remove dependency on haldaemon since hal is an optional
  requirement, the package can work without it just fine.
- Update to 1.57:
  * many fixes
  * support for newer kernels
  * Add a new "exec-commands" module
  * Updated manpages

Tue Dec  7 21:55:19 UTC 2010 -

- prereq init script haldaemon

Thu Feb 25 02:02:05 CET 2010 -

- drop laptop-mode-1.49-moblin-disable-control-hd-powermgmt.patch
  again which was just changin a setting from another patch
  upstream has CONTROL_HD_POWERMGMT="auto" now
- update to 1.53
    * Add global enable/disable switch for laptop-mode-tools
    * Add scheduler power saving module for SMT processors. Thanks to John
    * Add a new "Auto Modules" mode which enables all modules whitelisted as
      auto with a single configuration setting, ENABLE_AUTO_MODULES.
    * Add LM/NOLM option for Intel SATA Power Management
    * Do a check before trying to write to the SuperHE Control File
- update to 1.52
    * Initialize DEBUG to 0 by default. THanks to Matthijs Kooijman for pointing
      it out.
    * Add an option to completely disable ethernet devices when on battery.
    * Introduce hooks to enable debug mode for individual modules
    * Use iwconfig to determine device type for iwlwifi devices also
    * Collect the correct exit code for iwconfig execution.
    * Use iwconfig in wireless-iwl-power. Thanks to Darren Hoo for spotting it
    * Handle spaces in mount point names. Thanks to Louis Simard for the patch
    * Clarify about Global Debug mode and Module Specific Debug mode.
    * Fix incorrect variable reference in video-out module. Thanks to Hans Werner
      for noticing that.
- update to 1.51
    * Add option to blacklist usb devices by their device id.
      Thanks to for the patch
    * Trigger timer change for power mgmt by doing a device open/close
      The open/close operation can fail if the audio device is busy.
      Since this failure is non-fatal (worst case is that the timer changes
      don't get activated), we don't bother if it was successful or not.
    * Add support for EeePC FSB Control. Thanks to James Rayner
    * Update iwlwifi power modes. Thanks to Clemens Buchacher
      See Debian BTS: #540639
    * Use the standard pm-hibernate script from pm-utils for hibernation
      See Debian BTS: #541447
    * Check if wireless device is disabled before attempting to power configure it
      Thanks to Clemens Buchacher. See Debian BTS: #541997
    * On speed change, an ethernet device can lose connectivity. Document that in
      the config file
- update to 1.50
    * Ship pm-utils hooks in /usr/lib/ and not in /etc/pm/
      Distributions will always want to have customized settings in /etc
      and default upstream settings in /usr/lib. See LP: #384875
    * Fix incorrect explanation of Intel HDA Power Savings. See Debian
      BTS: #532733
    * Don't clutter screen with print messages.
    * Add patch from Mulyadi Santosa that adds ability to lm-profiler to show
      read/write frequency of each collected program. Thank you.
    * Enhance usb-autosuspend module to be executed under conditions. Also explain
      the weirdness of broken usb drivers. Fixes Debian Bug #535051
    * Do the test comparision of integeres using string operators. Fixes Debian
      Bug #535650
    * Run pidof with the -x Script Mode switch. Thanks Matthijs Kooijman
    * Disconnect descriptors when backgrounding a script. Thanks Matthijs Kooijman
    * Add option to run in shell debug mode
    * Add a spec file to generate an RPM package
Fri Dec  4 01:47:32 UTC 2009 -

- Add laptop-mode-1.49-moblin-enable-intel-hda-powersave.patch for
  enable audio power saving even using ac-power.

Thu Nov 19 14:59:37 UTC 2009 -

- Add laptop-mode-1.49-moblin-disable-control-hd-powermgmt.patch to
  disable the APM level setup to harddrive. (bug #545681)

Mon Oct  5 11:00:43 CEST 2009 -

- fix/workaround laptop-mode-tools causing garbage in the pm-utils
  suspend / hibernate logfile

Fri Jun 26 17:20:24 CEST 2009 -

- update to 1.49. Notable changes:
  - use syslog
  - better diagnostic messages
  - most of the other changes are unused in this package, see the
    changelog for more information
- adjust dirty_ratio defaults to new kernel's defaults

Fri Jan 23 19:19:10 CET 2009 -

- fix udevadm version check (bnc#468848), remove old patches

Thu Jan 15 17:57:07 CET 2009 -

- update to 1.45
  - various improvements, most are not used in this package
  - removed bashisms
  - AC adapter fixes
  - minor optimizations
  - manpage fixes

Fri Dec 12 11:36:52 CET 2008 -

- fix enabling of laptop-mode by default:
  Use %insserv_force_if_yast instead of %insserv_and_fillup to
  enable laptop-mode-tools by default (fate#304737)

Wed Sep 24 22:55:40 CEST 2008 -

- use udevadm info instead of udevinfo 

Tue Sep 16 13:47:22 CEST 2008 -

- fate#304737
   start laptop-mode-tools by default
   remount devices with relatime when on battery
   set hard dist power management to 128 when on battery

Tue Aug 19 14:03:20 CEST 2008 -

- Add "Default-Start:" and "Default-Stop:" to initscript

Thu May  8 15:49:28 CEST 2008 -

- build fix
- enhance the init script
- pm-utils integration

Wed May  7 20:24:01 CEST 2008 -

- initial submission, version 1.41
openSUSE Build Service is sponsored by