File grub2.changes of Package grub2

-------------------------------------------------------------------
Tue Dec 16 10:41:08 UTC 2014 - schwab@suse.de

- Require efibootmgr also on aarch64

-------------------------------------------------------------------
Thu Dec 11 11:20:13 UTC 2014 - schwab@suse.de

- grub2-snapper-plugin.sh: fix use of printf without format string; fix
  quoting

-------------------------------------------------------------------
Wed Dec 10 09:12:47 UTC 2014 - schwab@suse.de

- grub2-arm64-Reduce-timer-event-frequency-by-10.patch: fix periodic timer
  on arm64

-------------------------------------------------------------------
Thu Dec  4 01:42:39 UTC 2014 - agraf@suse.com

- enable 32bit arm targets for uboot and efi

-------------------------------------------------------------------
Sat Nov 29 18:26:00 UTC 2014 - Led <ledest@gmail.com>

- Replace 'echo -e' command in grub2-snapper-plugin.sh script to
  'printf' command. '-e' option of 'echo' command may be
  unsupported in some POSIX-complete shells.

-------------------------------------------------------------------
Fri Nov 14 16:06:00 UTC 2014 - Led <ledest@gmail.com>

- fix bashism in post script

-------------------------------------------------------------------
Thu Oct 30 15:18:16 CET 2014 - jdelvare@suse.de

- grub2.spec: Fix conditional construct which wasn't supported by
  older versions of rpmbuild (caused error message
  "parseExpressionBoolean returns -1".)

-------------------------------------------------------------------
Thu Oct 30 07:36:15 UTC 2014 - mchang@suse.com

- fix errors when boot is btrfs with Windows partition scheme. The
  first partition is created on cylinder boundary that can't offer
  enough room for core.img and also the installation has to be in 
  logical paritition which made MBR the only location to install.
  (bnc#841247)
  * add grub2-setup-try-fs-embed-if-mbr-gap-too-small.patch 

-------------------------------------------------------------------
Tue Sep 30 03:45:04 UTC 2014 - mchang@suse.com

- packaging 20_memtest86+ and 20_ppc_terminfo in corresponing grubarch
  package

-------------------------------------------------------------------
Mon Sep 29 07:22:29 UTC 2014 - fcastelli@suse.com

- Add '80_suse_btrfs_snapshot' required to show btrfs snapshots inside
  of the boot menu.

-------------------------------------------------------------------
Sun Sep 28 06:16:35 UTC 2014 - arvidjaar@gmail.com

- fix btrfs on big endian systems (ppc/ppc64)
  * add grub2-btrfs-fix-get_root-key-comparison-failures-due-to-en.patch

-------------------------------------------------------------------
Sun Sep 21 06:47:12 UTC 2014 - arvidjaar@gmail.com

- update translations
- fix possible access to uninitialized pointer in linux loader
  * add grub2-Initialized-initrd_ctx-so-we-don-t-free-a-random-poi.patch
  * drop superceded grub2-ppc64le-23-grub-segfaults-if-initrd-is-specified-before-specify.patch

-------------------------------------------------------------------
Thu Sep 18 09:55:57 UTC 2014 - mchang@suse.com

- fix grub.xen not able to handle legacy menu.lst hdX names (bnc#863821)
  * add grub2-xen-legacy-config-device-name.patch from arvidjaar
- fix the performance of grub2 uefi pxe is bad (bnc#871555)
  * add grub2-efinet-reopen-SNP-protocol-for-exclusive-use-by-grub.patch

-------------------------------------------------------------------
Tue Sep 16 07:08:18 UTC 2014 - schwab@suse.de

- grub2-mkconfig-aarch64.patch: Look for Image-* instead of vmlinuz-* on
  aarch64

-------------------------------------------------------------------
Mon Sep 15 15:30:03 UTC 2014 - arvidjaar@gmail.com

- add grub2-glibc-2.20.patch - fix build with glibc 2.20+
  (use _DEFAULT_SOURCE to avoid warning)

-------------------------------------------------------------------
Fri Sep 12 04:14:38 UTC 2014 - mchang@suse.com

- fix xen pvops kernel not appear on menu (bnc#895286)
  * refresh grub2-fix-menu-in-xen-host-server.patch 

-------------------------------------------------------------------
Wed Sep 10 10:34:47 UTC 2014 - mchang@suse.com

- fix extraneous comma in printf shell command (bnc#895884)
  * refresh grub2-btrfs-04-grub2-install.patch  

-------------------------------------------------------------------
Wed Aug 27 07:53:35 UTC 2014 - schwab@suse.de

- aarch64-reloc.patch: replace with upstream solution

-------------------------------------------------------------------
Mon Aug 25 03:10:18 UTC 2014 - mchang@suse.com

- remove unused patch, which's supersceded by new snapper rollback
  support patches
  * 0001-script-provide-overridable-root-by-subvol.patch
  * 0002-script-create-menus-for-btrfs-snapshot.patch

-------------------------------------------------------------------
Fri Aug 22 10:05:13 UTC 2014 - mchang@suse.com

- fix openqa boot error on separate boot partition
  * refresh grub2-btrfs-05-grub2-mkconfig.patch 

-------------------------------------------------------------------
Thu Aug 21 06:10:07 UTC 2014 - mchang@suse.com

- update snapper plugin for rollback support
  * refresh grub2-snapper-plugin.sh 

-------------------------------------------------------------------
Fri Aug 15 07:55:54 UTC 2014 - mchang@suse.com

- snapper rollback support patches.
- rename patch
  * 0002-btrfs-add-ability-to-boot-from-subvolumes.patch to
    grub2-btrfs-01-add-ability-to-boot-from-subvolumes.patch
  * 0004-btrfs-export-subvolume-envvars.patch to
    grub2-btrfs-02-export-subvolume-envvars.patch
- added patches
  * grub2-btrfs-03-follow_default.patch
  * grub2-btrfs-04-grub2-install.patch
  * grub2-btrfs-05-grub2-mkconfig.patch 
- remove patch
  * 0003-cmdline-add-envvar-loader_cmdline_append.patch
  
-------------------------------------------------------------------
Thu Aug 14 06:35:58 UTC 2014 - mchang@suse.com

- grub2-btrfs-fix-incorrect-address-reference.patch
  * Fix incorrect address reference in GRUB_BTRFS_EXTENT_REGULAR
    range check (bnc#869748) 

-------------------------------------------------------------------
Wed Aug 13 02:56:22 UTC 2014 - mchang@suse.com

- grub2-vbe-blacklist-preferred-1440x900x32.patch
  * Blacklist preferred resolution 1440x900x32 which is broken on 
    many Thinkpads (bnc#888727) 

-------------------------------------------------------------------
Tue Aug 12 12:56:29 UTC 2014 - schwab@suse.de

- Enable building on aarch64
- aarch64-reloc.patch: support R_AARCH64_PREL32 relocation
- Build host tools with RPM_OPT_FLAGS

-------------------------------------------------------------------
Mon Aug 11 14:34:55 UTC 2014 - dvaleev@suse.com

- Fix the 64-bit trampoline code in dynamic linker (bnc#890999)
  grub2-ppc64le-fix-64bit-trampoline-in-dyn-linker.patch 

-------------------------------------------------------------------
Tue Jul 29 11:46:54 CEST 2014 - tiwai@suse.de

- Prefer a higher resolution in efi_gop driver if the mode taking
  over is too small like 640x480 (bnc#887972):
  grub2-efi_gop-avoid-low-resolution.patch 

-------------------------------------------------------------------
Wed Jul  9 16:26:35 UTC 2014 - dvlaeev@suse.com

- Fix ppc64le build by fixing 
  grub2-xfs-V5-filesystem-format-support.patch 

-------------------------------------------------------------------
Wed Jun 25 09:20:16 UTC 2014 - jack@suse.cz

- xfs V5 superblock support (bnc#880166 bnc#883942)

- added patches:
  * grub2-xfs-Add-helper-for-inode-size.patch
  * grub2-xfs-Fix-termination-loop-for-directory-iteration.patch
  * grub2-xfs-Convert-inode-numbers-to-cpu-endianity-immediate.patch
  * grub2-xfs-V5-filesystem-format-support.patch

-------------------------------------------------------------------
Fri Jun 20 19:50:28 UTC 2014 - jeffm@suse.com

- grub2: use stat instead of udevadm for partition lookup (bnc#883635)
  * Added grub2-use-stat-instead-of-udevadm-for-partition-lookup.patch

-------------------------------------------------------------------
Tue Apr 15 08:36:46 UTC 2014 - tchvatal@suse.com

- Fix sorting of RC kernels to be older than first regular of the
  series. Fixes bnc#827531.

- added patches:
  * grub2-use-rpmsort-for-version-sorting.patch

-------------------------------------------------------------------
Thu Apr 10 16:35:08 UTC 2014 - dvaleev@suse.com

- Build GRUB2 for ppc64le as LittleEndian and 64bit
- Fix timeout issue on ppc64le (bnc#869166)
- Add powerpc-utils requires to grub2-powerpc-ieee1275

- added patches:
  * grub2-ppc64-build-ppc64-32bit.patch
  * grub2-ppc64-qemu.patch
  * grub2-ppc64le-01-Add-Little-Endian-support-for-Power64-to-the-build.patch
  * grub2-ppc64le-02-Build-grub-as-O1-until-we-add-savegpr-and-restgpr-ro.patch
  * grub2-ppc64le-03-disable-creation-of-vsx-and-altivec-instructions.patch
  * grub2-ppc64le-04-powerpc64-LE-s-linker-knows-how-to-handle-the-undefi.patch
  * grub2-ppc64le-05-grub-install-can-now-recognize-and-install-a-LE-grub.patch
  * grub2-ppc64le-06-set-the-ABI-version-to-0x02-in-the-e_flag-of-the-PPC.patch
  * grub2-ppc64le-07-Add-IEEE1275_ADDR-helper.patch
  * grub2-ppc64le-08-Fix-some-more-warnings-when-casting.patch
  * grub2-ppc64le-09-Add-powerpc64-types.patch
  * grub2-ppc64le-10-powerpc64-is-not-necessarily-BigEndian-anymore.patch
  * grub2-ppc64le-11-Fix-warnings-when-building-powerpc-linux-loader-64bi.patch
  * grub2-ppc64le-12-GRUB_ELF_R_PPC_-processing-is-applicable-only-for-32.patch
  * grub2-ppc64le-13-Fix-powerpc-setjmp-longjmp-64bit-issues.patch
  * grub2-ppc64le-14-Add-powerpc64-ieee1275-trampoline.patch
  * grub2-ppc64le-15-Add-64bit-support-to-powerpc-startup-code.patch
  * grub2-ppc64le-16-Add-grub_dl_find_section_addr.patch
  * grub2-ppc64le-17-Add-ppc64-relocations.patch
  * grub2-ppc64le-18-ppc64-doesn-t-need-libgcc-routines.patch
  * grub2-ppc64le-19-Use-FUNC_START-FUNC_END-for-powerpc-function-definit.patch
  * grub2-ppc64le-20-.TOC.-symbol-is-special-in-ppc64le-.-It-maps-to-the-.patch
  * grub2-ppc64le-21-the-.toc-section-in-powerpc64le-modules-are-sometime.patch
  * grub2-ppc64le-22-all-parameter-to-firmware-calls-should-to-be-BigEndi.patch
  * grub2-ppc64le-23-grub-segfaults-if-initrd-is-specified-before-specify.patch
  * grub2-ppc64le-timeout.patch
- removed patches:
  * grub2-powerpc-libgcc.patch
  * grub2-ppc64le-core-bigendian.patch
  * grub2-ppc64le-platform.patch
-------------------------------------------------------------------
Thu Apr 10 07:39:30 UTC 2014 - mchang@suse.com

- add grub2-x86_64-xen subpackage (bnc#863821)

-------------------------------------------------------------------
Sat Apr  5 14:27:45 UTC 2014 - arvidjaar@gmail.com

- rename grub2.chrp back into grub.chrp, otherwise it is not found by
  grub tools
- replace grub2-use-DejaVuSansMono-for-starfield-theme.patch with
  grub2-use-Unifont-for-starfield-theme-terminal.patch - use Unifont
  font for terminal window

-------------------------------------------------------------------
Thu Feb 27 04:30:07 UTC 2014 - mchang@suse.com

- grub2-snapper-plugin: fix important snapshots are not marked as such
  in grub2 menu, also display the snapshot entries in the format
  "important distribution version (kernel_version, timestamp, pre/post)"
  (bnc#864842)

-------------------------------------------------------------------
Mon Feb 24 07:28:42 UTC 2014 - mchang@suse.com

- refresh grub2-fix-menu-in-xen-host-server.patch (bnc#859361)
  * prevent 10_linux from booting xen kernel without pv_opt support
    on systems other than xen PV domU guest   
  * prevent 20_linux_xen.in from setting up nested virt running from
    Xen domU
- refresh grub2-fix-Grub2-with-SUSE-Xen-package-install.patch
  * adjust accordingly 

-------------------------------------------------------------------
Thu Feb 20 14:43:21 UTC 2014 - jw@suse.com

- updating grub2-once
  - added --list switch.
  - improved --help and error handling.

-------------------------------------------------------------------
Tue Feb 11 03:02:21 UTC 2014 - mchang@suse.com

- add Supplements: packageand(snapper:grub2) in grub2-snapper-plugin
  to install it while both snapper and grub2 are installed

-------------------------------------------------------------------
Wed Feb  5 04:33:55 UTC 2014 - mchang@suse.com

- add grub2-snapper-plugin.sh (fate#316232)
  * grub2's snapper plugin for advanced btrfs snapshot menu management
  * package as grub2-snapper-plugin.noarch
- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
  * when booting btrfs snapshots disabled, deleting snapshot master config
    if it's not customized

-------------------------------------------------------------------
Fri Jan 31 14:42:26 UTC 2014 - dvaleev@suse.com

- Enable grub2 for PowerPC LE (ppc64le)
- Add ppc64le to exclusive arches
- Don't require gcc-32bit (PowerLE don't have 32bit toolchain)

- added patches:
  * grub2-powerpc-libgcc.patch
     Provide 32bit libgcc functions for PowerLE

  * grub2-ppc64le-core-bigendian.patch
     Build grub kernel and images as BE on ppc64le (BL is BE there)

  * grub2-ppc64le-platform.patch
     Enable ppc64le platform

-------------------------------------------------------------------
Fri Jan 24 13:48:13 CET 2014 - jjolly@suse.com

- Add changes to allow build for s390x arch: added
  grub2-s390x-01-Changes-made-and-files-added-in-order-to-allow-s390x.patch

-------------------------------------------------------------------
Wed Jan 22 05:19:35 UTC 2014 - mchang@suse.com

- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
* Fix bootable snapshots not found while root is on Btrfs subvolume
  (bnc#859587)
* Create missing slave config in /.snapshots/<num>/
* Prefix with SUSE_ for related options

-------------------------------------------------------------------
Fri Jan 17 06:23:04 UTC 2014 - mchang@suse.com

- refresh 0001-script-provide-overridable-root-by-subvol.patch
* Introduce $boot_prefix for setting prefix on seeking other /boot
  directory.
- refresh 0002-script-create-menus-for-btrfs-snapshot.patch
* Support existing snapshots by creating their missing slave configs.
* Temporarily default to disable this feature until receiving more
  tests from QA.
* Introduce GRUB_ENABLE_CUSTOM_SNAPSHOT_SUBMENU to allow custom
  submenu for listing snapshots rather than the default one.

-------------------------------------------------------------------
Wed Jan 15 15:46:31 UTC 2014 - arvidjaar@gmail.com

- package autoiso.cfg and osdetect.cfg as documentation
- add 0001-look-for-DejaVu-also-in-usr-share-fonts-truetype.patch -
  fix configure test for DejaVu font
- add dejavu-fonts to BR (needed to build starfield theme)
- package starfield theme as grub2-branding-upstream
- add grub2-use-DejaVuSansMono-for-starfield-theme.patch - use fixed width
  font for starfield theme
- clarify that grub2 subpackage contains only user space tools

-------------------------------------------------------------------
Wed Jan 15 06:18:10 UTC 2014 - mchang@suse.com

- add new patches for booting btrfs snapshot (fate#316522) (fate#316232)
  * 0001-script-provide-overridable-root-by-subvol.patch
  * 0002-script-create-menus-for-btrfs-snapshot.patch
 
-------------------------------------------------------------------
Fri Dec 27 16:36:40 UTC 2013 - arvidjaar@gmail.com

- update to grub-2.02 beta2
  * drop upstream patches
    - grub2-fix-unquoted-string-in-class.patch (different)
    - grub2-cdpath.patch (modified)
    - grub2-fix-parsing-of-short-LVM-PV-names.patch
    - grub2-fix-descriptor-leak-in-grub_util_is_imsm.patch
    - grub2-install-opt-skip-fs-probe.patch (file it patched no more exists,
      functionality included upstream)
    - grub2-fix-x86_64-efi-startup-stack-alignment.patch
    - grub2-fix-x86_64-efi-callwrap-stack-alignment.patch
    - 0001-Fix-build-with-FreeType-2.5.1.patch
  * rediff
    - grub2-linux.patch
    - use-grub2-as-a-package-name.patch (do not patch generated configure)
    - grub2-GRUB_CMDLINE_LINUX_RECOVERY-for-recovery-mode.patch
    - grub2-fix-locale-en.mo.gz-not-found-error-message.patch (upstream added
      explicit exclusion for en_* language only; I do not see reason to stop
      with error in this case for any language).
    - not-display-menu-when-boot-once.patch
    - grub2-secureboot-provide-linuxefi-config.patch
    - grub2-pass-corret-root-for-nfsroot.patch
    - 0002-btrfs-add-ability-to-boot-from-subvolumes.patch
    - grub2-fix-menu-in-xen-host-server.patch 
    - grub2-fix-Grub2-with-SUSE-Xen-package-install.patch
    - grub2-secureboot-add-linuxefi.patch
    - grub2-secureboot-no-insmod-on-sb.patch 
    - rename-grub-info-file-to-grub2.patch
  * drop Makefile.util.am and Makefile.core.am, they are now generated
    during build
  * call ./autogen.sh again now when it does not need autogen anymore; drop
    autoreconf call, it is called by autogen.sh
  * drop 0001-btrfs-rename-skip_default-to-follow_default.patch - is not
    needed anymore due to upstream changes
  * package /usr/bin/grub2-file, /usr/bin/grub2-syslinux2cfg and
    /usr/sbin/grub2-macbless
  * use grub-install --no-bootsector instead of --grub-setup=/bin/true
    in postinstall script

-------------------------------------------------------------------
Tue Dec 17 07:20:33 UTC 2013 - mchang@suse.com

- add new patches for booting btrfs snapshot (fate#316522) (fate#316232)
  * 0001-btrfs-rename-skip_default-to-follow_default.patch
  * 0002-btrfs-add-ability-to-boot-from-subvolumes.patch
  * 0003-cmdline-add-envvar-loader_cmdline_append.patch
  * 0004-btrfs-export-subvolume-envvars.patch

-------------------------------------------------------------------
Tue Dec 10 19:13:53 UTC 2013 - arvidjaar@gmail.com

- add patch 0001-Fix-build-with-FreeType-2.5.1.patch - fix build with
  freetype2 >= 2.5.1 (backport from fd0df6d098b1e6a4f60275c48a3ec88d15ba1fbb)

-------------------------------------------------------------------
Sun Dec  1 13:10:23 UTC 2013 - arvidjaar@gmail.com

- reset executable bits on *module, *.exec and *.image files. They are not
  executable.

-------------------------------------------------------------------
Fri Nov 22 07:12:16 UTC 2013 - glin@suse.com

- add grub2-fix-x86_64-efi-startup-stack-alignment.patch and
  grub2-fix-x86_64-efi-callwrap-stack-alignment.patch: fix the
  stack alignment of x86_64 efi. (bnc#841426)

-------------------------------------------------------------------
Wed Sep 11 07:17:07 UTC 2013 - mchang@suse.com

- use new update-bootloader option --reinit to install and update
  bootloader config
- refresh grub2-secureboot-no-insmod-on-sb.patch to fobid module
  loading completely.

-------------------------------------------------------------------
Mon Sep  9 09:22:34 UTC 2013 - lnussel@suse.de

- replace openSUSE UEFI certificate with new 2048 bit certificate.

-------------------------------------------------------------------
Sat Jul 27 10:12:36 UTC 2013 - arvidjaar@gmail.com

- add grub2-fix-parsing-of-short-LVM-PV-names.patch - fix PV detection in
  grub-probe when PV name is less than 10 charaters
- add grub2-fix-descriptor-leak-in-grub_util_is_imsm.patch - fix decriptor
  leak which later caused LVM warnings during grub-probe invocation
- remove --enable-grub-emu-usb - it is not needed on physical platform

-------------------------------------------------------------------
Tue Jul  9 10:54:41 UTC 2013 - mchang@suse.com

- refresh grub2-fix-menu-in-xen-host-server.patch: In domU we
  have to add xen kernel to config. (bnc#825528) 

-------------------------------------------------------------------
Wed Jun 26 17:02:08 UTC 2013 - elchevive@opensuse.org

- updated existent translations and include new ones
	(es, lt, pt_BR, sl, tr)

-------------------------------------------------------------------
Sun Jun 16 12:42:33 UTC 2013 - arvidjaar@gmail.com

- update to current upstream trunk rev 5042
  * drop upstream patches
    - grub2-correct-font-path.patch
    - grub2-fix-mo-not-copied-to-grubdir-locale.patch
    - grub2-stdio.in.patch
    - grub2-fix-build-error-on-flex-2.5.37.patch
    - grub2-quote-messages-in-grub.cfg.patch
    - 30_os-prober_UEFI_support.patch
    - grub2-fix-enumeration-of-extended-partition.patch
    - grub2-add-device-to-os_prober-linux-menuentry.patch
    - grub2-fix-tftp-endianness.patch
    - efidisk-ahci-workaround
    - grub2-grub-mount-return-failure-if-FUSE-failed.patch
  * rediff
    - rename-grub-info-file-to-grub2.patch
    - grub2-linux.patch
    - use-grub2-as-a-package-name.patch
    - grub2-iterate-and-hook-for-extended-partition.patch
    - grub2-secureboot-add-linuxefi.patch 
    - grub2-secureboot-no-insmod-on-sb.patch
    - grub2-secureboot-chainloader.patch
  * add
    - grub2-linguas.sh-no-rsync.patch
      + disable rsync in linguas.sh so it can be used during RPM build
      + disable auto-generated catalogs, they fail at the moment due to
        missing C.UTF-8 locale
  * update Makefile.util.am and Makefile.core.am
  * grub2-mknetdir is now in /usr/bin
  * generate po/LINGUAS for message catalogs using distributed linguas.sh
  * remove po/stamp-po during setup to trigger message catalogs rebuild
  * package bootinfo.txt on PPC (used by grub2-mkrescue)

-------------------------------------------------------------------
Sat Apr 13 08:48:52 UTC 2013 - arvidjaar@gmail.com

- BuildRequires: help2man to generate man pages and package them too

-------------------------------------------------------------------
Fri Apr  5 17:01:42 UTC 2013 - arvidjaar@gmail.com

- add grub2-secureboot-use-linuxefi-on-uefi-in-os-prober.patch (bnc#810912)
  * use linuxefi in 30_os-prober if secure boot is enabled

-------------------------------------------------------------------
Wed Apr  3 17:56:20 UTC 2013 - arvidjaar@gmail.com

- update rename-grub-info-file-to-grub2.patch
  * do not rename docs/grub2.texi here, do it in %%prep (we do it there
    conditionally already). It simplifies patch refreshing using quilt
    which does not support file rename.

-------------------------------------------------------------------
Wed Apr  3 06:55:52 UTC 2013 - mchang@suse.com

- refresh grub2-secureboot-chainloader.patch: Fix wrongly aligned
  buffer address (bnc#811608) 

-------------------------------------------------------------------
Thu Mar 28 02:57:47 UTC 2013 - mchang@suse.com

- package Secure Boot CA file as /usr/lib64/efi/grub.der which
  could be used to verify signed image from build server
- add openSUSE-UEFI-CA-Certificate.crt, openSUSE Secure Boot CA
- add SLES-UEFI-CA-Certificate.crt, SUSE Linux Enterprise Secure
  Boot CA

-------------------------------------------------------------------
Mon Mar 25 17:37:59 UTC 2013 - dvaleev@suse.com

- extraconfigure macro is not defined on ppc 

-------------------------------------------------------------------
Sat Mar 23 18:31:07 UTC 2013 - arvidjaar@gmail.com

- corretly set chainloaded image device handle in secure boot mode (bnc#809038)

-------------------------------------------------------------------
Wed Mar 13 11:30:52 UTC 2013 - mchang@suse.com
  
- remove all compatible links in grub2-efi as now all concerned 
  utilities are fixed
- superseding grub2-efi by grub2-x86_64-efi and grub2-i386-efi on
  x86_64 and ix86 respectively
- make grub2-x86_64-efi and grub2-i386-efi providing grub2-efi
  capability to not break package dependency
- handle upgrade from 12.2 by preseving grubenv and custom.cfg to
  new directory /boot/grub2, rename /boot/grub2-efi to
  /boot/grub2-efi.rpmsave to avoid confusion.

-------------------------------------------------------------------
Mon Mar 11 16:02:26 UTC 2013 - arvidjaar@gmail.com

- move post scripts into corresponding subpackages to ensure they are
  run after updated binaries are installed. Currently it may happen
  that update-bootlader picks up old binaries.
- move requires for perl-Bootloader to target subpackages. Make sure
  efi requires minimal version that supports /boot/grub2.
- add requires(post) to force order of installation: grub2 => grub2-arch
  => grub2-efi
- split efi post in two parts. One that updates configuration and is part
  of grub2-efiarch and second that migrates settings and is part of
  grub2-efi. Only custom.cfg and grubenv may need migration. device.map
  is not relevant for EFI and new grub.cfg had been created at this point.

-------------------------------------------------------------------
Mon Mar 11 06:52:58 UTC 2013 - mchang@suse.com

- add grub2-fix-tftp-endianness.patch from upstream (bnc#808582)
- add efinet and tftp to grub.efi (bnc#808582)

-------------------------------------------------------------------
Thu Mar  7 15:39:50 UTC 2013 - seife+obs@b1-systems.com

- convert spec file to UTF-8

-------------------------------------------------------------------
Thu Mar  7 08:12:57 UTC 2013 - mchang@suse.com

- add lvm to grub.efi (bnc#807989)
- add loadenv to grub.efi (bnc#807992)

-------------------------------------------------------------------
Mon Mar  4 16:48:32 UTC 2013 - arvidjaar@gmail.com

- grub2-grub-mount-return-failure-if-FUSE-failed.patch - return error
  if fuse_main failed (bnc#802983)

-------------------------------------------------------------------
Mon Feb 25 13:31:31 UTC 2013 - fcrozat@suse.com

- Fix build for SLES 11.

-------------------------------------------------------------------
Tue Feb 19 15:38:04 UTC 2013 - duwe@suse.com

   Fix up bogus items from the previous merge:
 - efi_libdir = _libdir = /usr/lib
 - package /usr/lib/grub2 dir only once
 - move grub.efi to /usr/lib/grub2/%{grubefiarch}/
 - create a symlink so that scripts can find it there.

-------------------------------------------------------------------
Thu Feb 14 11:42:40 UTC 2013 - duwe@suse.com

- merge internal+external BS changes into superset spec file, 
  remove obsolete dependencies
- merge SLES+openSUSE patches, restrict "grub-efi" to 12.2
- add efidisk-ahci-workaround (bnc#794674)
- fix unquoted-string-in-class.patch (bnc#788322)

-------------------------------------------------------------------
Fri Feb  8 01:58:22 UTC 2013 - mchang@suse.com

- adapt to pesign-obs-integration changes

-------------------------------------------------------------------
Thu Feb  7 10:38:42 UTC 2013 - mchang@suse.com

- grub.efi signing on build server.

-------------------------------------------------------------------
Thu Jan 31 16:18:56 UTC 2013 - duwe@suse.com

- switch to out of source / subdir build

-------------------------------------------------------------------
Wed Jan 30 07:29:29 UTC 2013 - mchang@suse.com

- sync from SLE-11 SP3 to date
- set empty prefix to grub.efi for looking up in current directory
- grub2-cdpath.patch: fix the grub.cfg not found when booting from
  optical disk
- put grub.efi in grub2's source module directory
- create links in system's efi directory to grub.efi
- arvidjaar: do not overwrite device path in grub2-cdpath.patch

-------------------------------------------------------------------
Wed Jan 30 04:36:45 UTC 2013 - arvidjaar@gmail.com

- remove obsolete reference to /boot/grub2-efi and /usr/sbin/grub2-efi
  from grub2-once
- add GRUB_SAVEDFAULT description to /etc/default/grub

-------------------------------------------------------------------
Tue Jan 29 02:42:28 UTC 2013 - mchang@suse.com

- set empty prefix to grub.efi for looking up in current directory
- remove grubcd.efi, as grub.efi can now be used for cdrom booting

-------------------------------------------------------------------
Mon Jan 28 08:05:52 CET 2013 - snwint@suse.de

- add fat module to grubcd
- explicitly set empty prefix to get grub to set $prefix to the currrent
  directory

-------------------------------------------------------------------
Fri Jan 18 07:39:18 UTC 2013 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- add grub2-secureboot-chainloader.patch, which expands the efi
  chainloader to be able to verify images via shim lock protocol.

-------------------------------------------------------------------
Fri Jan 18 06:24:57 UTC 2013 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485).
- update for cdrom boot support.
- grub2-cdpath.patch: fix the grub.cfg not found when booting from
  optical disk.
- grubcd.efi: the efi image used for optial disk booting, with
  reduced size and $prefix set to /EFI/BOOT.

-------------------------------------------------------------------
Tue Jan  8 08:09:01 UTC 2013 - mchang@suse.com

- add grub2-fix-unquoted-string-in-class.patch (bnc#788322)

-------------------------------------------------------------------
Tue Jan  8 07:09:47 UTC 2013 - arvidjaar@gmail.com

- add grub2-add-device-to-os_prober-linux-menuentry.patch (bnc#796919)

-------------------------------------------------------------------
Sun Jan  6 18:54:54 UTC 2013 - arvidjaar@gmail.com

- add patch grub2-fix-enumeration-of-extended-partition.patch to
  fix enumeration of extended partitions with non-standard EBR (bnc#779534)

-------------------------------------------------------------------
Fri Jan  4 10:29:58 UTC 2013 - arvidjaar@gmail.com

- add support for chainloading another UEFI bootloader to
  30_os-prober (bnc#775610)

-------------------------------------------------------------------
Fri Dec 21 04:18:06 UTC 2012 - mchang@suse.com

- put 32-bit grub2 modules to /usr/lib/grub2
- put 64-bit grub2 modules to /usr/lib64/grub2 (x86_64-efi)
- put grub.efi to /usr/lib64/efi(x86_64) or /usr/lib/efi(i586)

-------------------------------------------------------------------
Tue Dec 18 03:43:38 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- add grub2-secureboot-chainloader.patch, which expands the efi
  chainloader to be able to verify images via shim lock protocol.

-------------------------------------------------------------------
Fri Nov 30 06:39:15 UTC 2012 - mchang@suse.com

- replace %{sles_version} by %{suse_version} 
- use correct product name

-------------------------------------------------------------------
Mon Nov 26 08:26:10 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- added secureboot patches which introduces new linuxefi module
  that is able to perform verifying signed images via exported
  protocol from shim. The insmod command will not function if
  secure boot enabled (as all modules should built in grub.efi
  and signed).
  - grub2-secureboot-add-linuxefi.patch
  - grub2-secureboot-use-linuxefi-on-uefi.patch
  - grub2-secureboot-no-insmod-on-sb.patch
  - grub2-secureboot-provide-linuxefi-config.patch
- Makefile.core.am : support building linuxefi module
- Make grub.efi image that is with all relevant modules incorporated
  and signed, it will be the second stage to the shim loader which
  will verified it when secureboot enabled.
- Make grub.efi's path to align with shim loader's default loader
  lookup path.
- The changes has been verified not affecting any factory instalation,
  but will allow us to run & test secure boot setup manually with shim.

-------------------------------------------------------------------
Thu Nov 22 07:01:31 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- In SLE-11 SP3, don't include any other architecture binaries
  except EFI, so we split packages by architecture binaries to
  meet the requirement.
  - grub2 : common utilties and config etc
  - grub2-efi : provide compatibilty to grub2-efi package
  - grub2-i386-pc : binaries for x86 legacy pc firmware 
  - grub2-i386-efi : binaries for ia32 EFI firmware
  - grub2-x86_64-efi : binaries for x86_64 firmware
  - grub2-powerpc-ieee1275: binaries for powerpc open firmware

-------------------------------------------------------------------
Tue Nov 20 16:14:50 UTC 2012 - arvidjaar@gmail.com

- update grub2-quote-messages-in-grub.cfg.patch to use upstream commit

-------------------------------------------------------------------
Mon Nov 19 16:40:25 UTC 2012 - arvidjaar@gmail.com

- quote localized "Loading ..." messages in grub.cfg (bnc#790195)

-------------------------------------------------------------------
Mon Nov  5 08:17:26 UTC 2012 - aj@suse.de

- We really only need makeinfo, so require that one where it exists.

-------------------------------------------------------------------
Thu Nov  1 08:10:12 UTC 2012 - mchang@suse.com

- ship a Secure Boot UEFI compatible bootloader (fate#314485)
- Secure boot support in installer DVD (fate#314489)
- prime support for package on SLE-11 (SP3) 
  - remove buildrequire to libuse and ncurses 32-bit devel packages
    as they are needed by grub-emu which we don't support
  - remove buildrequire to freetype2-devel-32bit as it's not need
    by grub2-mkfont and others
  - buildrequire to xz instead of lzma
  - buildrequire to texinfo instead of makeinfo
  - remove buildrequire to autogen as it's not available in SLE-11
  - add Makefile.util.am Makefile.core.am generated by autogen
  - run autoreconf -vi instead of ./autogen.sh
  - For SLE-11 remove buildrequire to gnu-unifont as it's not
    yet available. Also do not package pf fonts created from it.
  - workaround SLE-11 patch utility not rename file for us
  - add -fno-inline-functions-called-once to CFLAGS to fix build
    error on gcc 4.3.x
  - not require os-prober for SLE-11, as package not yet ready

-------------------------------------------------------------------
Sat Oct 27 05:27:42 UTC 2012 - arvidjaar@gmail.com

- grub2-efi now depends on exact grub2 version

-------------------------------------------------------------------
Fri Oct 25 17:00:35 UTC 2012 - arvidjaar@gmail.com

- build grub2-efi with standard "grub2" prefix (bnc#782891)
  - remove use-grub2-efi-as-a-package-name.patch
  - migrate settings from /boot/grub2-efi to /boot/grub2 in efi post
  - provide some compatibility links grub2-efi-xxx for perl-Bootloader
  - workaround for /boot/grub2-efi linkk and /boot/grub2/grub.cfg
    missing on update from older versions

-------------------------------------------------------------------
Thu Oct 25 05:56:59 UTC 2012 - mchang@suse.com

- add grub2-fix-build-error-on-flex-2.5.37.patch

-------------------------------------------------------------------
Thu Oct 18 16:10:02 UTC 2012 - arvidjaar@gmail.com

- modify patch grub2-iterate-and-hook-for-extended-partition.patch to
  ignore extended partitions other then primary (bnc#785341)

-------------------------------------------------------------------
Wed Sep 26 08:04:48 UTC 2012 - mchang@suse.com

- refresh grub2-fix-locale-en.mo.gz-not-found-error-message.patch
  with the correct fix in upstream bugzilla #35880 by Colin Watson 
  (bnc#771393)

-------------------------------------------------------------------
Fri Sep 21 07:37:53 UTC 2012 - mchang@suse.com

- grub2-fix-locale-en.mo.gz-not-found-error-message.patch (bnc#771393) 

-------------------------------------------------------------------
Wed Sep 19 18:54:34 UTC 2012 - arvidjaar@gmail.com

- add 20_memtest86+ (bnc#780622) 

-------------------------------------------------------------------
Tue Sep 18 09:26:29 UTC 2012 - mchang@suse.com

- Fix un-bootable grub2 testing entry in grub's menu.lst (bnc#779370) 
- Not add new grub2 testing entry if it's not found in menu.lst
- Update grub2 stuff and config if there's grub2 entry in menu.lst
- Check for current bootloader as update-bootloader acts on it

-------------------------------------------------------------------
Thu Aug 30 08:00:54 UTC 2012 - mchang@suse.com

- add grub2-fix-Grub2-with-SUSE-Xen-package-install.patch (bnc#774666)
- add grub2-pass-corret-root-for-nfsroot.patch (bnc#774548)

-------------------------------------------------------------------
Mon Aug 20 06:27:23 UTC 2012 - mchang@suse.com

- disable grub2-enable-theme-for-terminal-window.patch to use
  default black background due to current background has poor 
  contrast to the font color (bnc#776244).

-------------------------------------------------------------------
Fri Aug 10 19:31:40 UTC 2012 - jslaby@suse.de

- rename grub2once to grub2-once

-------------------------------------------------------------------
Wed Aug  1 08:01:41 UTC 2012 - mchang@suse.com

- add grub2once (bnc#771587)
- add not-display-menu-when-boot-once.patch

-------------------------------------------------------------------
Sat Jul 28 14:17:56 UTC 2012 - aj@suse.de

- Fix build with missing gets declaration (glibc 2.16)

-------------------------------------------------------------------
Fri Jul 27 13:22:24 UTC 2012 - tittiatcoke@gmail.com

- Add grub2-enable-theme-for-terminal-window.patch (bnc#770107)

-------------------------------------------------------------------
Thu Jul 19 11:03:37 UTC 2012 - mchang@suse.com

- add grub2-fix-menu-in-xen-host-server.patch (bnc#757895)

-------------------------------------------------------------------
Wed Jul 18 08:29:53 UTC 2012 - mchang@suse.com

- add grub2-fix-error-terminal-gfxterm-isn-t-found.patch
- add grub2-fix-mo-not-copied-to-grubdir-locale.patch

-------------------------------------------------------------------
Wed Jul 18 08:12:19 UTC 2012 - aj@suse.de

- We only need makeinfo, not texinfo for building.

-------------------------------------------------------------------
Tue Jul 17 21:12:26 CEST 2012 - jslaby@suse.de

- fix build by adding texinfo to buildrequires.

-------------------------------------------------------------------
Fri Jul  6 08:09:16 UTC 2012 - mchang@suse.com

- grub2-GRUB_CMDLINE_LINUX_RECOVERY-for-recovery-mode.patch. We
  don't run in sigle user mode for recovery, instead use different
  set kernel command line options which could be specified by this 
  GRUB_CMDLINE_LINUX_RECOVERY setting.  

-------------------------------------------------------------------
Wed Jul  4 06:20:23 UTC 2012 - mchang@suse.com

- add use-grub2-efi-as-a-package-name.patch (bnc#769916)

-------------------------------------------------------------------
Fri Jun 29 10:02:08 UTC 2012 - dvaleev@suse.com

- Add configuration support for serial terminal consoles. This will
  set the maximum screen size so that text is not overwritten. 

-------------------------------------------------------------------
Fri Jun 29 09:51:59 UTC 2012 - dvaleev@suse.com

- don't enable grub-emu-usb on ppc ppc641

-------------------------------------------------------------------
Thu Jun 28 09:33:26 CEST 2012 - jslaby@suse.de

- update to 2.0 final
  * see ChangeLog for changes

-------------------------------------------------------------------
Mon Jun 25 11:10:27 UTC 2012 - adrian@suse.de

- enable xz/lzma support for image file generation

-------------------------------------------------------------------
Sun Jun 24 18:10:27 UTC 2012 - jslaby@suse.de

- update to 2.0 beta6, a snapshot from today
  * see ChangeLog for changes

-------------------------------------------------------------------
Fri Jun 22 08:50:12 UTC 2012 - mchang@suse.com

- do not package grub.cfg, as it's generated at runtime and the
  presence of it would confuse pygrub (bnc#768063)

-------------------------------------------------------------------
Wed May 16 06:38:05 UTC 2012 - mchang@suse.com

- fix build error on 12.1 caused by autogen aborts because of
  absence of guile package

-------------------------------------------------------------------
Wed May  2 03:17:21 UTC 2012 - mchang@suse.com

- grub2-automake-1-11-2.patch : fix grub2 build error on newer
  autotools (automake >= 1.11.2)
- call ./autogen.sh

-------------------------------------------------------------------
Thu Apr 19 11:28:44 UTC 2012 - mchang@suse.com

- grub2-probe-disk-mountby.patch : fix grub2-probe fails on
  probing mount-by devices under /dev/disk/by-(id|uuid|path).
  (bnc#757746) 
 
-------------------------------------------------------------------
Thu Mar 29 07:08:38 UTC 2012 - mchang@suse.com

- Add Requires to os-prober as script depends on it for probing
  foreign os (bnc#753229)

-------------------------------------------------------------------
Wed Mar 21 06:58:43 UTC 2012 - mchang@suse.com

- Mark %config(noreplace) to /etc/default/grub (bnc#753246)

-------------------------------------------------------------------
Fri Mar 16 09:21:40 UTC 2012 - aj@suse.de

- Fix build with gcc 4.7 (needs -fno-strict-aliasing for zfs code).

-------------------------------------------------------------------
Tue Mar 13 04:06:06 UTC 2012 - mchang@suse.com

- Fix error in installation to extended partition (bnc#750897)
  add grub2-iterate-and-hook-for-extended-partition.patch
  add grub2-install-opt-skip-fs-probe.patch

-------------------------------------------------------------------
Mon Mar 12 09:34:40 UTC 2012 - tittiatcoke@gmail.com

- Added BuildRequires for gnu-unifont in order to create the 
  necessary fonts for a graphical boot menu.

-------------------------------------------------------------------
Mon Feb 20 13:04:51 UTC 2012 - andrea.turrini@gmail.com

- fixed typos in grub2.spec

-------------------------------------------------------------------
Mon Jan  2 03:16:13 UTC 2012 - mchang@suse.com

- platforms without efi should not specify exclusion of it

-------------------------------------------------------------------
Thu Dec 29 02:31:23 UTC 2011 - mchang@suse.com

- set --target=%{_target_plaform) explicitly to %configure in case
  it wouldn't do that for us implicitly
- when making x86_64-efi image not use i386 target build and keep
  use of x86_64. otherwise it would have error "invalid ELF header"

-------------------------------------------------------------------
Fri Dec  2 16:31:14 UTC 2011 - coolo@suse.com

- add automake as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Mon Nov 28 09:40:44 CET 2011 - jslaby@suse.de

- remove doubly packaged files
- remove INSTALL from docs
- handle duplicate bindir files

-------------------------------------------------------------------
Mon Oct 31 13:08:21 CET 2011 - meissner@suse.de

- make efi exclusion more complete

-------------------------------------------------------------------
Thu Oct 27 08:16:58 UTC 2011 - aj@suse.de

- efibootmgr only exists on x86-64 and ia64.

-------------------------------------------------------------------
Tue Oct 25 08:38:19 UTC 2011 - aj@suse.de

- Add requires from efi subpackage to main package (bnc#72596)

-------------------------------------------------------------------
Mon Oct 24 13:11:39 CEST 2011 - jslaby@suse.de

- update it and pl translations
- cleanup spec file
  * don't package efi files to non-efi package

-------------------------------------------------------------------
Thu Aug 25 14:46:04 UTC 2011 - aj@suse.de

- Fix directory ownership.

-------------------------------------------------------------------
Tue Aug 23 12:46:43 UTC 2011 - aj@suse.de

- Build an efi subpackage [bnc#713595].

-------------------------------------------------------------------
Tue Aug  2 12:10:39 UTC 2011 - dvaleev@novell.com

- enable ppc build
- patch unused-but-set-variable 

-------------------------------------------------------------------
Tue Jul 12 14:03:05 UTC 2011 - aj@suse.de

- Create submenu for all besides primary Linux kernels.
- Only run preun section during package install but not during
  upgrade.

-------------------------------------------------------------------
Tue Jul 12 11:48:08 UTC 2011 - aj@suse.de

- Update README.openSUSE

-------------------------------------------------------------------
Tue May 31 10:42:29 CEST 2011 - jslaby@suse.de

- update translations
- update to 1.99 final
  * See NEWS file for changes

-------------------------------------------------------------------
Sat May  7 12:33:43 CEST 2011 - jslaby@suse.de

- fix build with gcc 4.6
- build in parallel (fixed finally in 1.99)
- add translations from translations project
- update to 1.99-rc2
  * See NEWS file for changes

-------------------------------------------------------------------
Wed Oct 27 16:57:13 CEST 2010 - jslaby@suse.de

- fix vanishing of /boot/grub2/* if /boot/grub/device.map
  doesn't exist

-------------------------------------------------------------------
Mon Oct 25 12:39:11 UTC 2010 - jslaby@suse.de

- add missing " in the default file; add "fi" to grub2-linux.patch

-------------------------------------------------------------------
Mon Oct 11 22:29:27 CEST 2010 - jslaby@suse.de

- repack gz to bz2 (0.5M saving)

-------------------------------------------------------------------
Sat Oct  9 19:16:51 UTC 2010 - aj@suse.de

- Do not output vmlinux if vmlinuz of same version exists.
- Update default grub file.

-------------------------------------------------------------------
Sat Oct  9 13:58:31 UTC 2010 - aj@suse.de

- Add patch grub-1.98-follow-dev-mapper-symlinks.patch from Fedora
  for grub2-probe to detect lvm devices correctly

-------------------------------------------------------------------
Sat Sep 11 23:55:54 CEST 2010 - jslaby@suse.de

- add gettext "requires"

-------------------------------------------------------------------
Sun Mar 14 12:11:53 UTC 2010 - aj@suse.de

- Fix build on x86-64.

-------------------------------------------------------------------
Fri Mar 12 20:39:25 UTC 2010 - aj@suse.de

- Don't build parallel.
- Update to grub 1.98 including:
  * Multiboot on EFI support.
  * Saved default menu entry support, with new utilities `grub-reboot' and
    `grub-set-default'.
  * Encrypted password support, with a new utility `grub-mkpasswd-pbkdf2'.
  * `grub-mkfloppy' removed; use `grub-mkrescue' to create floppy images.

-------------------------------------------------------------------
Fri Feb 12 08:21:10 UTC 2010 - aj@suse.de

- Update to grub 1.97.2:
  * Fix a few 4 GiB limits.
  * Fix license problems with a few BSD headers.
  * Lots of misc bugfixes.

-------------------------------------------------------------------
Wed Dec  9 12:37:18 UTC 2009 - aj@suse.de

- Fix requires.

-------------------------------------------------------------------
Wed Dec  9 11:45:57 UTC 2009 - aj@suse.de

- Mark /etc/default/grub as config file.

-------------------------------------------------------------------
Wed Dec  9 10:45:33 UTC 2009 - aj@suse.de

- Mark root partition rw

-------------------------------------------------------------------
Wed Dec  9 09:11:33 UTC 2009 - aj@suse.de

- New package grub2.