A new user interface for you! Read more...

File radvd.changes of Package radvd

-------------------------------------------------------------------
Sun Nov 09 23:29:00 UTC 2014 - Led <ledest@gmail.com>

- fix bashisms in post script

-------------------------------------------------------------------
Wed Jul 30 17:09:01 UTC 2014 - sfalken@opensuse.org

- Update to version 2.2
  minor fixes:
    Netlink: set setup_iface fix for down interface coming up
    split send_ra into smaller function
    orgainize struct Interface with nested structures
    time: Use clock_gettime and monotonic clock
    add disable_ipv6_autoconfig function so an interface radvd
      is using won't autoconfig itself using its own advert
    improved netlink message processing to *only* reinit an
      interface that changed.
  build fixes:
    Revert bison locations in order to support byacc
    Amend DIST_EXTRA with the make check files
    Add command line option parsing to the check unit test application
    Add make check target based on the check unit testing framework
    Add check in configure.ac for clock_gettime
    Makefile.am: Fix out of tree builds
		 disable struct-overflow warning
    Add compiler attributes to type check format strings

-------------------------------------------------------------------
Wed Jul 30 02:28:13 UTC 2014 - sfalken@opensuse.org

- Update to version 2.2
  * Updated specfile to change /var/run to /run, in order to fix rpmlint check failures
  * Added:
	radvd-2.2.tar.xz
        radvd-2.2.tar.xz.asc
  * Removed:
	radvd-1.9.7.tar.xz
        radvd-1.9.7.tar.xz.asc
  * Updated:
	0001-run-as-user-radvd-by-default.diff
        radvd-configure.patch
        radvd.spec

-------------------------------------------------------------------
Thu Mar 13 11:36:22 CET 2014 - jbohac@suse.cz

- fix the radvd.service file to use /etc/sysconfig/radvd 
  (bnc#854316)

-------------------------------------------------------------------
Fri Jan 10 14:19:44 CET 2014 - jbohac@suse.cz

- Update to version 1.9.7
  * ioctl bug fix for getting the hardware address and mtu of an interface
- Update to version 1.9.6
  * Check AdvSendAdvert before sending an advertisement
- Update to version 1.9.5
  * IPv6 forwarding setting should be 1 or 2
  * Performance fix in netlink message processing
  * fix for kernels with no NETLINK_NO_ENOBUFS defined
  * distributing gz, bz2 and xz tarballs
  * also distributing md5, sha1, sha256 and gpg signatures
- Update to version 1.9.4
  * IPv6 forwarding setting should be 1 or 2
  * Performance fix in netlink message processing
  * fix for kernels with no NETLINK_NO_ENOBUFS defined
  * distributing gz, bz2 and xz tarballs
  * also distributing md5, sha1, sha256 and gpg signatures
- Update to version 1.9.3
  * check for sys/sysctl.h availability
  * radvdump fix to interpret MTU and Route
- Update to version 1.9.2
  * A few minor Makefile.am fixes
- Update to version 1.9.1
  * Replacing a '==' in configure with '=' for better shell portability
- added .asc (gpg key not yet found)

-------------------------------------------------------------------
Tue Nov  5 12:44:38 UTC 2013 - speilicke@suse.com

- Don't start daemon after package installation, the default config is almost
  useless and previous package versions installed even bad ones into
  /etc/radvd.conf (it would never be fixed since the file is 
  %ghost %config(noreplace)
- Fix try-restart to only restart the daemon if it's actually running. Allow
  condrestart, which is LSB

-------------------------------------------------------------------
Wed Dec  5 19:24:34 UTC 2012 - dimstar@opensuse.org

- Add radvd-tmpfile-grpname.patch: On openSUSE, the radvd user is
  added to the 'daemon' group (not a specific 'radvd' group). Thus
  adjusting the groupname in for the file to be installed in
  tmpfiles.d. Otherwise, the systemd-tmpfiles service fails to
  start (and radvd can't find the /var/run folder).

-------------------------------------------------------------------
Thu Jun 14 16:14:42 UTC 2012 - crrodriguez@opensuse.org

- Remove URL from source as this is a git snapshot 

-------------------------------------------------------------------
Thu Jun 14 01:00:56 UTC 2012 - crrodriguez@opensuse.org

- Update to version 1.9rc1.xxx
 * Support systemd tmpfiles.d 
 * add Native systemd units for this service
 * Uses libdaemon to deamonize and store PID file.
 * Use setsockopt NETLINK_NO_ENOBUFS
 * fixes debian bug 634485

-------------------------------------------------------------------
Fri Dec  2 16:43:39 UTC 2011 - coolo@suse.com

- add automake as buildrequire to avoid implicit dependency

-------------------------------------------------------------------
Wed Nov 16 14:23:54 UTC 2011 - dimstar@opensuse.org

- Update to version 1.8.3:
  + proper tracking of buffer usage in send_ra
- Drop diff_release_1_8_2..44ee01c7.patch: fixed upstream.

-------------------------------------------------------------------
Wed Oct 19 11:53:20 CEST 2011 - jbohac@suse.cz

- Update to version 1.8.3-rc1
- additional patches up to commit 44ee01c7 to fully fix the
  path traversal CVE-2011-3602 (bnc#721968)

-------------------------------------------------------------------
Thu Sep 29 02:15:09 UTC 2011 - crrodriguez@opensuse.org

- Update to version 1.8.1 for details see NEWS
- Fix package building in factory, creating /var/run/radvd before
  being marked as %ghost
- Run spec cleaner

-------------------------------------------------------------------
Tue May  3 14:36:57 UTC 2011 - lnussel@suse.de

- new version 1.7:
  - Fix an unintentional change in 1.3: RAs were accidentally often unicast to
    solicitors instead of being multicast. This is still compliant with the
    specification but is not optimal.
  - Allow radvd.conf prefix, clients, route, and RDNSS options to be in any order.
  - exit if the number of prefixes/routes/etc. would grow too much.
  - Fix radvd skipping multiple interfaces when UnicastOnly is on or
    AdvSendAdvert is off. This got broken in radvd 1.3.
  - Fix a segmentation fault on reload_config() timer list corruption that only
    occurs with multiple interfaces.
  - Add '-c' flag to test configuration.
  - Deprecate old, pre-RFC5006 parameters. Support RFC6106 by adding DNS Search List support.
- run as user radvd by default (bnc#691456)
- clean up init script
- install a small default config that advertises ULAs. Default prefix is
  autogenerated to get a different for on each installation.
- start even if forwarding is not on to be able to work with ULAs only

-------------------------------------------------------------------
Wed Jul 29 11:29:23 CEST 2009 - jbohac@suse.cz

- Update to version 1.3:
    - mainly compilation fixes
    - decreased the default valid and preferred lifetimes
    - support for arbitrary interface names

-------------------------------------------------------------------
Wed Aug 20 15:21:26 CEST 2008 - jbohac@suse.cz

- Update to version 1.1:
    - Implement privilege separation on Linux: a master root 
      process (which is able to reconfigure interfaces) and the 
      main process. There is '-s' toggle to keep old behaviour.
    - Fix Linux retrans_timer on old kernels 
      (newer ones have retrans_timer_ms)
    - Fix stderr+syslog (default) logging on non-i386 platforms.
    - Require that interface must be RUNNING instead of just UP. 
      Note: this could break deployments with very old kernels.
    - Implement automatic interface address advertising with 
      special prefix ::/64.
    - Relax interface naming (e.g. with VLANs) requirements.
    - Fix ordering of route, prefix and RDNSS options (only 
      matters with RDNSS) 

-------------------------------------------------------------------
Tue Nov 27 16:45:46 CET 2007 - jbohac@suse.cz

- Update to version 1.0:
    - Fix AdvDefaultLifetime initalization, broken in 0.9.1.
    - Fix STDERR+syslog logging, don't try STDERR after forking.
    - Implement RDNSS draft with (non-allocated) ND type code 25.
    - Redefined IgnoreIfMissing: failed interfaces are now 
      reinitialized by default. IgnoreIfMissing only omits warnings 
      about these.
    - Unblock SIGALRM at startup.
    - Implement MAX_INITIAL_RTR_ADVERT_INTERVAL handling (upstream 
      fix for #149014)
    - Perform some dynamic/static code audit, fix some minor bugs 
      and do cleanup as a result. 

-------------------------------------------------------------------
Thu Mar 29 16:56:53 CEST 2007 - rguenther@suse.de

- Add bison and flex BuildRequires. 

-------------------------------------------------------------------
Thu Jul 20 16:27:50 CEST 2006 - schwab@suse.de

- Call autoreconf to work around broken time stamps.

-------------------------------------------------------------------
Wed Feb  8 11:58:41 CET 2006 - okir@suse.de

- Make radvd limit the initial RA intervals according to RFC 2461.
  Needed for IPv6 Ready Logo (#149014)

-------------------------------------------------------------------
Wed Jan 25 21:41:04 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Mon Dec 12 12:29:36 CET 2005 - okir@suse.de

- Update to latest upstream version 0.9

-------------------------------------------------------------------
Tue Feb 22 14:29:22 CET 2005 - kukuk@suse.de

- Update to 0.7.3 (merge of all fixes)

-------------------------------------------------------------------
Wed Feb  4 11:47:54 CET 2004 - kukuk@suse.de

- Add some patches from RedHat package

-------------------------------------------------------------------
Sun Jan 11 12:47:31 CET 2004 - adrian@suse.de

- add %defattr

-------------------------------------------------------------------
Fri Aug 15 13:11:30 CEST 2003 - kukuk@suse.de

- Add ServiceRestart tag to sysconfig file [Bug #28927]

-------------------------------------------------------------------
Fri Jan 17 13:43:46 CET 2003 - kukuk@suse.de

- Update to version 0.7.2 (VLAN support)

-------------------------------------------------------------------
Thu Jan 16 16:36:02 CET 2003 - kukuk@suse.de

- Add metadata to sysconfig template [Bug #22678]

-------------------------------------------------------------------
Thu Aug  1 15:37:02 CEST 2002 - kukuk@suse.de

- Add PreRequires for insserv and fillup

-------------------------------------------------------------------
Mon Mar  4 17:23:11 CET 2002 - kukuk@suse.de

- Rename OPTIONS variable to RADVD_OPTIONS

-------------------------------------------------------------------
Thu Jan 24 10:42:48 CET 2002 - kukuk@suse.de

- Update to version 0.7.1 (minor fixes)

-------------------------------------------------------------------
Sat Jan 12 22:13:17 CET 2002 - kukuk@suse.de

- Add options to radvd

-------------------------------------------------------------------
Sat Jan 12 20:06:04 CET 2002 - kukuk@suse.de

- Add radvd sysconfig option file
- Don't source rc.config in init script

-------------------------------------------------------------------
Fri Nov 23 16:04:44 CET 2001 - kukuk@suse.de

- update to 0.7.0
- Remove START variable
- Cleanup init script

-------------------------------------------------------------------
Wed Jun  6 18:55:26 CEST 2001 - bjacke@suse.de

- update to 0.6.2pl3

-------------------------------------------------------------------
Mon Apr 23 10:35:11 CEST 2001 - kukuk@suse.de

- Fix type in START variable

-------------------------------------------------------------------
Mon Apr  9 14:13:12 CEST 2001 - bjacke@suse.de

- init script rework

-------------------------------------------------------------------
Mon Feb  5 14:04:08 CET 2001 - bjacke@suse.de

- updated to 0.6.2

-------------------------------------------------------------------
Wed Jan 10 19:20:44 CET 2001 - bjacke@suse.de

- removed service from runlevel 2

-------------------------------------------------------------------
Mon Nov 27 22:24:00 CET 2000 - bjacke@suse.de

- moved init script to /etc/init.d

-------------------------------------------------------------------
Thu Nov 23 14:02:00 CET 2000 - bjacke@suse.de

- use insserv for init.d script

-------------------------------------------------------------------
Mon Nov 13 17:34:13 CET 2000 - bjacke@suse.de

- some specfile fixes

-------------------------------------------------------------------
Mon Oct 28 08:40:42 CEST 2000 - bjacke@suse.de

- initial build