File connectx_port_config of Package libmlx4-rdmav2

#!/bin/bash

#
# Copyright (c) 2006 Mellanox Technologies. All rights reserved.
#
# This Software is licensed under one of the following licenses:
#
# 1) under the terms of the "Common Public License 1.0" a copy of which is
#    available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/cpl.php.
#
# 2) under the terms of the "The BSD License" a copy of which is
#    available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/bsd-license.php.
#
# 3) under the terms of the "GNU General Public License (GPL) Version 2" a
#    copy of which is available from the Open Source Initiative, see
#    http://www.opensource.org/licenses/gpl-license.php.
#
# Licensee has the right to choose one of the above licenses.
#
# Redistributions of source code must retain the above copyright
# notice and one of the license notices.
#
# Redistributions in binary form must reproduce both the above copyright
# notice, one of the license notices in the documentation
# and/or other materials provided with the distribution.
#
#

port_types=( "" "ib" "eth" "auto" )

usage()
{
	echo "Usage:"
	echo "/sbin/connectx_port_config"
	echo "/sbin/connectx_port_config -s|--show"
	echo "/sbin/connectx_port_config -h|--help"
	echo "/sbin/connectx_port_config [-d|--device <PCI device id>] -c|--conf <port1,port2>"
	echo "Possible port configurations:"
	echo "	eth,eth"
	echo "	eth,ib"
	echo "	eth,auto"
	echo "	ib,ib"
	echo "	ib,eth"
	echo "	ib,auto"
	echo "	auto,auto"
	echo "	auto,eth"
}

is_integer()
{
	printf "%s\n" $1 |grep -E "^[+-]?[0-9]+$" > /dev/null
	return $?
}

# If module $1 is loaded return - 0 else - 1
is_module()
{
	local RC

	/sbin/lsmod | grep -w "$1" > /dev/null 2>&1
	RC=$?

	return $RC
}

# Select PCI device interactively
select_device()
{
	printf "Please select device to modify [$dev]: "
	read dev;

	if is_integer $dev; then
		if [ $dev -lt 1 ]; then
			echo "Illegal index selected, quitting..."; echo
			exit 1;
		fi

		if [ -e ${Devices[$dev]}/mlx4_port1 ]; then
			echo "`echo ${Devices[$dev]} | cut -d '/' -f 6`"; echo
		else
			echo "Illegal value selected, quitting..."; echo
			exit 1
		fi
	else
		echo "Numeric value expected, quitting..."; echo
		exit 1
	fi
}

set_device()
{
	ser=0;
	for d in ${Devices[@]}; do
		ser=$(($ser+1))
		if [ "/sys/bus/pci/devices/${udevice}/" == "$d" ] || [ "/sys/bus/pci/devices/0000:${udevice}/" == "${d}" ] ; then
			dev=$ser
			return
		fi
	done
}

validate_device()
{
	if [ "$udevice" = "0" ]; then
		if [ "$comm" != "" ]; then
			if [ ${#Devices[@]} -gt 1 ]; then
				echo "More then 1 ConnectX devices found, please specify required device"; echo
				usage
				exit 1
			fi
		fi
		return
	fi

	for d in ${Devices[@]}; do
		ser=$(($ser+1))
		if [ "/sys/bus/pci/devices/${udevice}/" == "$d" ] || [ "/sys/bus/pci/devices/0000:${udevice}/" == "${d}" ] ; then
			return
		fi
	done
	echo "Error: illegal device selected."
	exit 1;
}

validate_port_config()
{
	for conf in "eth,eth" "eth,ib" "eth,auto" "auto,auto" "auto,eth" "ib,ib" "ib,auto" "ib,eth" "eth" "auto" "ib"; do
		if [ "$conf" == "$comm" ]; then
			return
		fi
	done
	echo "Error: $comm is not valid port configuration"
	usage
	exit 1;
}

prompt_options()
{
	local port=$1
	local options=$2
	if [ "$port" == "2" ]; then
		if [ -e ${Devices[$dev]}/mlx4_port2 ]; then
			echo -n ""
		else
			return 0
		fi
	fi

	printf "Select mode for port $port (${options}): "
	read mode
	if is_integer $mode; then
		if [ $mode -lt 0 ]; then
			echo "Illegal value selected, quitting..."; echo
			exit 1
		fi
		if [ `echo ${options} | grep ${mode} -wc` == 0 ]; then
			echo "Illegal value selected, quitting..."; echo
			exit 1
		fi
		return "${mode}"
	else
		echo "Illegal value selected, quitting..."; echo
		exit 1
	fi
}

show_configuration()
{
	local cnt=0
	for pci_dev in /sys/bus/pci/devices/*/; do
		if [ -e $pci_dev/mlx4_port1 ]; then
			echo "--------------------------------"
			dev=`echo $pci_dev | cut -d '/' -f 6`
			echo "Port configuration for PCI device: $dev is:"
			cat ${pci_dev}/mlx4_port1
			if [ -e $pci_dev/mlx4_port2 ]; then
				cat ${pci_dev}/mlx4_port2
			fi
			echo "--------------------------------"
			cnt=$(($cnt+1))
		fi
	done
	if [ $cnt == 0 ]; then
		echo "No ConnectX devices found or driver not loaded"
	fi
}

save_config()
{
	local configuration_file=/etc/infiniband/connectx.conf
	local config_comment="# ConnectX Port Configuration for $udevice"
	local config_line=" -d $udevice -c $comm"

	local add_new_lines=1
	if [ -e "${configuration_file}" ]; then
		# check if there is a configuration to the device
		grep "${udevice}" ${configuration_file} >> /dev/null
		if [ $? -eq 0 ]; then
			# replace the configuration lines
			sed -i "s/#.* ${udevice}/${config_comment}/" ${configuration_file}
			sed -i "s/.*connectx_port_config.*$udevice.*/\/sbin\/connectx_port_config${config_line}/" ${configuration_file}

			add_new_lines=0
		fi
	fi

	# add the configuration lines to the end of the file
	if [ ${add_new_lines} -ne 0 ]; then
		echo "${config_comment}" >> ${configuration_file}
		echo "/sbin/connectx_port_config${config_line}" >> ${configuration_file}
	fi
}

set_port_config()
{
	echo "|----------------------------|"
	echo "| Possible port modes:       |"
	echo "| 1: Infiniband              |"
	echo "| 2: Ethernet                |"
	echo "| 3: AutoSense               |"
	echo "|----------------------------|"

	local options="1,2,3"

	prompt_options 1 $options
	comm=${port_types[$?]}
	if [ -n "${comm}" ]; then
		prompt_options 2 $options
		local port2_conf=${port_types[$?]}

		if [ -n "${port2_conf}" ]; then
			comm="${comm},${port2_conf}"
		fi
	fi
}


udevice=0
comm=""
###############################################################################
#                          Parsing command line                               #
###############################################################################
while [ ! -z "$1" ]; do
	case "$1" in
	-s|--show)
		show_configuration
		if [ -n "$2" ]; then
			echo "Too many parameters"
			usage
			exit 1
		fi
		exit 0
	;;
	-d|--device)
		if [ -z "$2" ]; then
			echo "Error: Illegal input"
			usage
			exit 1
		fi
		udevice=$2
		shift 2
	;;
	-c|--conf)
		if [ -z "$2" ]; then
			echo "Error: Illegal input"
			usage
			exit 1
		fi
		comm=$2
		shift 2;
		validate_port_config
	;;
	-h|--help)
		usage
		exit 0
	;;
	*)
		echo "Wrong parameter error: $1"
		usage
		exit 1
	;;
	esac
done

#############################################################
# Load low level driver if not loaded                       #
#############################################################
is_module mlx4_core
RC=$?
if [ $RC == 1 ]; then
	echo "Bus driver not loaded, loading..."
	/sbin/modprobe mlx4_core
fi

#############################################################
# List ConnectX devices                                     #
#############################################################
i=0
echo; echo "ConnectX PCI devices :"
echo "|----------------------------|"
for pci_dev in /sys/bus/pci/devices/*/; do
	if [ -e $pci_dev/mlx4_port1 ]; then
		(( i++ ))
		Devices[$i]=$pci_dev
		dev=`echo $pci_dev | cut -d '/' -f 6`
		echo "| $i             $dev |"
	fi
done
echo "|----------------------------|"; echo

validate_device

if [ $i == 0 ]; then
	echo "No devices found, quiting..."
	exit 1;
fi

#############################################################
# Select device to modify                                   #
#############################################################
dev=1
if [ $i -ne 1 ]; then
	if [ "$comm" != "" ]; then
		if [ "$udevice" != "0" ]; then
			set_device
		fi
	else
		select_device
	fi
fi

udevice=`echo ${Devices[$dev]} | cut -d '/' -f 6`

echo "Before port change:"
cat ${Devices[$dev]}/mlx4_port1
if [ -e ${Devices[$dev]}/mlx4_port2 ]; then
	cat ${Devices[$dev]}/mlx4_port2
fi
echo

write_mask="0x222"
mlx4_port_file="${Devices[$dev]}/mlx4_port1"
if [ ! -w $mlx4_port_file ] || [ $((0x$(stat -c "%a" $mlx4_port_file) & $write_mask)) == "0" ]; then
	echo "Not allowed to change port configuration, quitting..."
	exit 1;
fi
mlx4_port_file="${Devices[$dev]}/mlx4_port2"
if [ -e $mlx4_port_file ] && ([ ! -w $mlx4_port_file ] || [ $((0x$(stat -c "%a" $mlx4_port_file) & $write_mask)) == "0" ]); then
	echo "Not allowed to change port configuration, quitting..."
	exit 1;
fi

############################################################
# Set port configuration for the selected device           #
############################################################
if [ "$comm" == "" ]; then
	set_port_config
fi

if [ -e ${Devices[$dev]}/port_trigger ]; then
	echo "all" > ${Devices[$dev]}/port_trigger
fi

comm1=`echo ${comm} | cut -d ',' -f 1`
comm2=`echo ${comm} | cut -d ',' -f 2`

for uverbs_dir in ${Devices[$dev]}infiniband_verbs/uverbs*
do
	if [[ -f $uverbs_dir/ref_cnt  ]]; then
		if [[ `cat "$uverbs_dir/ref_cnt"` > 1 ]]; then
			echo "WARNING: Please close user level applications" \
			     "before running connectx_port_config. "
			echo "Operation aborted!"
			exit 1
		fi
	fi
done

{
echo "${comm1}" > ${Devices[$dev]}/mlx4_port1
} > /dev/null 2>&1
rc=$?
	if [ -e ${Devices[$dev]}/mlx4_port2 ]; then
	{
		echo "${comm2}" > ${Devices[$dev]}/mlx4_port2
	} > /dev/null 2>&1
	rc=$?
fi
if [ $rc -ne 0 ]; then
	echo "WARNING: Illegal port configuration attempted,"
	echo "	Please view dmesg for details."; echo
	exit 1
fi

echo; echo "After port change:"
cat ${Devices[$dev]}/mlx4_port1
if [ -e ${Devices[$dev]}/mlx4_port2 ]; then
	cat ${Devices[$dev]}/mlx4_port2
fi

save_config

exit 0