File gpsctl.1 of Package gpsctl

.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.5.
.TH GPSCTL "1" "December 2020" "gpsctl version 1.13" "User Commands"
.SH NAME
gpsctl \- manual page for gpsctl version 1.13
.SH DESCRIPTION
Options for gpsctl:
.TP
\fB\-V\fR, \fB\-\-version\fR
display the version of this program
.TP
\fB\-U\fR, \fB\-\-usage\fR
display a short description of this program's usage
.TP
\-?, \fB\-\-help\fR
display this help message
.TP
\fB\-v\fR, \fB\-\-verbose\fR
get verbose messages (may repeat up to 2 times)
.TP
\fB\-q\fR, \fB\-\-quiet\fR
get verbose messages
.TP
\fB\-p\fR, \fB\-\-port\fR <device>
specify the port device (default is '/dev/serial0')
.TP
\fB\-j\fR, \fB\-\-json\fR
select JSON query output (may repeat up to 3 times)
.TP
\fB\-a\fR, \fB\-\-autobaud\fR[=\fI\,method\/\fR]
infer baud rate using ascii, nmea, ubx data (default is ubx)
.TP
\fB\-b\fR, \fB\-\-baud\fR <baud rate>
specify different host baud rate; any standard rate is allowed
.TP
\fB\-M\fR, \fB\-\-minbaud\fR <baud rate>
specify minimum baud rate for autobaud (default is '9600'); any standard rate is allowed
.TP
\fB\-\-test\fR
test the GPS' PPS signal
.TP
\fB\-s\fR, \fB\-\-sync\fR[=\fI\,method\/\fR]
synchronize using ascii, nmea, ubx data (default is ubx)
.TP
\fB\-B\fR, \fB\-\-newbaud\fR <baud rate>
change the U\-Blox and host baud rates to the specified standard rate
.TP
\fB\-n\fR, \fB\-\-nmea\fR <yes/no>
configure whether the GPS sends NMEA data to the serial port (see "Yes or no values" below)
.TP
\fB\-Q\fR, \fB\-\-query\fR <query type>
query the GPS for info (see "Query types" below)
.TP
\fB\-\-galileo\fR
configure the GPS for Galileo Satellites
.TP
\fB\-\-satellites\fR
configure the GPS Satellites only
.TP
\fB\-\-configure_for_timing\fR
configure the GPS for maximum timing precision
.TP
\fB\-\-save_config\fR
synchronize using ascii, nmea, ubx data (default is ubx)
.TP
\fB\-\-reset\fR
reset the GPS
.TP
\fB\-e\fR, \fB\-\-echo\fR[=\fI\,seconds\/\fR]
echo human\-readable GPS data to stdout for the given time (0 or unspecified means forever)
.IP
Arguments in <angle brackets> are required; they MUST be supplied.
Arguments in [square brackets] are optional; they may be omitted.
.PP
Additional information:
.IP
Query types:
.TP
fix
returns position, altitude, and time information
.TP
version
returns hardware and software version of the GPS
.TP
config
returns GPS configuration information
.TP
satellites
returns currently visible satellite information from the GPS
.IP
Yes or no values:
.TP
yes
indicated by an initial character of 'y', 'Y', 't', 'T', or '1'
.TP
no
indicated by anything else
.SH EXAMPLES
.IP
gpsctl \-\-port=/dev/serial1 \-\-baud 9600 \-\-echo=5
.IP
Selects the serial port "/dev/serial1", sets the host serial port baud rate to 9600, and
echoes any received characters (presumably NMEA data) to stdout.
.IP
gpsctl \-p /dev/serial1 \-b 9600 \-e=5
.IP
Exactly the same as the preceding example, using short options.
openSUSE Build Service is sponsored by