File sg3_utils.changes of Package sg3_utils

-------------------------------------------------------------------
Fri Aug 13 11:42:50 CEST 2010 - dimstar@opensuse.org

- Update to version 1.29:
  + sg_rtpg: new logical block dependent state and bit (spc4r23)
  + sg_start: add '--readonly' option for ATA disks
  + sg_lib: update asc/ascq list to spc4r23
  + sg_inq: update version descriptor list to spc4r23
  + sg_vpd: block device characteristics page: fix form factor
    - update Extended Inquiry VPD page to spc4r23
    - update Block Limits VPD page to sbc3r22
    - update Thin Provisioning VPD page to sbc3r22
    - Automation device serial number and Data transfer device
      element VPD pages (ssc4r01)
    - add Referrals VPD page (sbc3r22)
  + sg_logs: add thin provisioning and solid state media log pages
    - addition of IBM LTO specific log pages
  + sg_modes: new page names from ssc4r01
  + sg_ses: sync with ses3r02 (SAS-2.1 connector types)
  + sg_unmap: add '--anchor' option (sbc3r22)
  + sg_write_same: add '--anchor' option (sbc3r22)
  + sg_pt interface: add set_scsi_pt_flags() to permit passing
    through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags
  + add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL
  + add AM_MAINTAINER_MODE to configure.ac to lessen build issues
  + add BSD_LICENSE file to this and lib directories, refer to
    it from source and header files. Some source has GPL license
- Changes from version 1.28:
  + sg_unmap: new utility for thin provisioning
    - add examples/sg_unmap_example.txt
  + sg_get_lba_status: new utility for thin provisioning
  + sg_read_block_limits: new utility for tape drives
  + sg_logs: add cache memory statistics log (sub)page
  + sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19)
  + sg_vpd: add Thin provisioning VPD page (sbc3r20) and
            TapeAlert supported flags VPD page
  + sg_inq: note VPD page support better in sg_vpd
  + sg_persist: add transport specific transportID format
    - allow transportIDs to be read from named file
  + sg_opcodes: allow --opcode= option to take OP and SA
    values (comma seperated)
    - tweak print format, remove test code
  + sg_requests: remove test code in progress calculation
  + sg_reset: add target reset option
  + sg_luns: reduce default maxlen to 8192 (for FreeBSD)
  + sg_raw: extend max cdb length from 16 to 256 bytes
    - align heap allocs to page boundaries
  + sg_lib: sg_set_binary_mode() needs config.h included
    - add progress indication sense data descriptor (0xa)
    - change SG3_UTILS_* constants to SG_LIB_*
    - decode service actions within persistent reserve in/out
    - sync with spc4r21
  + sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status()
  + sg_pt_linux: fix check condition but empty sense buffer;
    - major() macro grief, if present include <linux/kdev_t.h> and
      use MAJOR() instead
  + scripts/sas_disk_blink: moved from this package to sdparm
  + utils/hxascdmp: in Windows set binary mode on read files
  + examples/sg_persist_tst.sh: add PRIN read full status command
  + sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows
    set binary mode on read files
  + sg_pt_win32: default to non-direct variant of SPT interface
    - use './configure --enable-win32-spt-direct' to override
    - non-direct data length set to 16 KB, extended if required
  + debian: incorporate patch from debian sid

-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de

- use %_smp_mflags

-------------------------------------------------------------------
Tue Jul 21 14:00:16 CEST 2009 - hare@suse.de

- Clean up spec file and remove obsolete cruft

-------------------------------------------------------------------
Fri Apr 17 20:15:58 CEST 2009 - crrodriguez@suse.de

- remove static libraries and "la" files 

-------------------------------------------------------------------
Mon Jan 26 15:30:31 CET 2009 - hare@suse.de

- Fixes to rescan-scsi-bus.sh:
  * Implement '--forcerescan' to force a rescan of existing devices
  * Handle LUN changes correctly
  * Check variables before evaluation

-------------------------------------------------------------------
Wed Oct 29 11:05:47 CET 2008 - garloff@suse.de

- rescan-scsi-bus.sh 1.29:
  * Fix error in script (returning "" does not work)
  * Support systems without /proc/scsi
- Don't install INSTALL

-------------------------------------------------------------------
Tue Sep 30 14:11:15 CEST 2008 - hare@suse.de

-  Add %insserv_prereq (bnc#423204)

-------------------------------------------------------------------
Fri Sep 12 20:29:08 CEST 2008 - garloff@suse.de

- Update rescan-scsi-bus.sh script to 1.28:
  * Merge fixes from Hannes
  * Minor cleanups
  * Sort hosts numerically 

-------------------------------------------------------------------
Tue Aug 12 18:25:43 CEST 2008 - garloff@suse.de

- Update to sg3_utils-1.27:
  * Adapted to linux-2.6.26 (sg_map26)
  * sg_dd uses flock (rw -- if that fails ro)
  * sg_get_config: OSSC feature (mmc6r02)
- Update to sg3_utils-1.26:
  * Minor fixes and enhancements to
    sg_sat_phy_event, sg_ses, sg_get_config, sg_verify, sg_vpd,
    sg_inq, sg_modes, sg_start, sg_request, sg_luns, sg_dd, 
    sg_opcodes, sg_turs.
  * sg_lib: asc/ascq update for spc4r15, osd2r03 service actions,
    sense key specific unit attn queue overflow decoding, ...
  * Restructuring: sg_lib -> sg_lib_data, sg_inq_data, (u)int64_t,
    sg_io_linux -> lib/.
  * Documentation enhancements.

-------------------------------------------------------------------
Wed Jul 16 09:55:33 CEST 2008 - hare@suse.de

- Use correct length parameter for sg_inq (bnc#363438)

-------------------------------------------------------------------
Fri May 23 10:22:31 CEST 2008 - hare@suse.de

- Use 'Provides' to clean update dependency

-------------------------------------------------------------------
Fri May  9 17:31:33 CEST 2008 - schwab@suse.de

- Use autoreconf -i.

-------------------------------------------------------------------
Thu Apr 24 14:14:14 CEST 2008 - hare@suse.de

- Split off from original scsi package.
openSUSE Build Service is sponsored by