File dovecot21.changes of Package dovecot21

-------------------------------------------------------------------
Thu May 31 11:38:08 UTC 2012 - mrueckert@suse.de

- binaries should always be in /usr/lib not in %_libdir. Old
  _libexecdir definitions used _libdir.

-------------------------------------------------------------------
Tue May 29 20:56:33 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.7:
  * Session ID is now included by default in auth and login process
    log lines. It can be added to mail processes also by adding
    %{session} to mail_log_prefix.
  + Added ssl_require_crl setting, which specifies if CRL check must
    be successful when verifying client certificates.
  + Added mail_shared_explicit_inbox setting to specify if a shared INBOX
    should be accessible as "shared/$user" or "shared/$user/INBOX".
  - v2.1.5: Using "~/" as mail_location or elsewhere failed to actually
    expand it to home directory.
  - dbox: Fixed potential assert-crash when reading dbox files.
  - trash plugin: Fixed behavior when quota is already over limit.
  - mail_log plugin: Logging "copy" event didn't work.
  - Proxying to backend server with SSL: Verifying server certificate
    name always failed, because it was compared to an IP address.

-------------------------------------------------------------------
Fri May 25 23:37:05 UTC 2012 - alexandre@exatati.com.br

- Update Pigeonhole to 3.0.1:
  * Added support for retrieving Sieve scripts from dict lookup. This
    means that Sieve scripts can now be downloaded from a database.
    Compiled script binaries are still put on disk somewhere if used.
    The INSTALL documentation is updated with information on this new
    feature and the (backwards-compatible) changes to the configuration.
    Note that his feature is currently not supported for
    sieve_before/sieve_after or script management through ManageSieve.
  + Incorporated the sieve_duplicate plugin into main Pigeonhole tree as
    a normal extension (vnd.dovecot.duplicate). This Dovecot-specific
    extension adds the ability to check for duplicate deliveries based
    on message ID. Specification can be found in:
    doc/rfc/spec-bosch-sieve-duplicate.txt
  + Added support for specifying multiple sieve_before and sieve_after
    paths. This adds much more flexibility to the multiscript
    configuration. One application is to have user-specific Sieve
    scripts outside the user's normal control through ManageSieve.
  + Added a "session ID" string for managesieve connections, available in
    %{session} variable (analogous to Dovecot change).
  - Fixed several small issues, including a few potential segfault bugs,
    based on static source code analysis.
  - ManageSieve: changed use of EPROTO error to EIO in ManageSieve
    string stream implementation because it is apparently not known in
    BSD.
  - Gave stamp.h.in (needed for autotools) some content to prevent it
    from disappearing in patch files.
  - Fixed bug that caused a SunStudio CC compile failure (reported by
    Piotr Tarnowski).

-------------------------------------------------------------------
Mon May  7 18:33:35 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.6:
  * Session ID is now included by default in auth and login process
    log lines. It can be added to mail processes also by adding
    %{session} to mail_log_prefix.
  + Added ssl_require_crl setting, which specifies if CRL check must
    be successful when verifying client certificates.
  + Added mail_shared_explicit_inbox setting to specify if a shared INBOX
    should be accessible as "shared/$user" or "shared/$user/INBOX".
  - v2.1.5: Using "~/" as mail_location or elsewhere failed to actually
    expand it to home directory.
  - dbox: Fixed potential assert-crash when reading dbox files.
  - trash plugin: Fixed behavior when quota is already over limit.
  - mail_log plugin: Logging "copy" event didn't work.
  - Proxying to backend server with SSL: Verifying server certificate
    name always failed, because it was compared to an IP address.

-------------------------------------------------------------------
Mon Apr 23 13:56:24 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.5:
  * IMAP: When neither the session nor the mailbox has modseq tracking
    enabled, return the mailbox as having NOMODSEQ in SELECT/EXAMINE
    reply. Old versions in this situation always simply returned
    HIGHESTMODSEQ as 1, which could have broken some clients.
  + dict file: Added optional fcntl/flock locking (default is dotlock)
  + fts-solr: doveadm fts rescan now resets indexes, which allows
    reindexing mails. (This isn't a full rescan implementation like
    fts-lucene has.)
  + doveadm expunge: Added -d parameter to delete mailbox if it's
    empty after expunging.
  - IMAP: Several fixes related to mailbox listing in some configs
  - director: A lot of fixes and performance improvements
  - v2.1.4 didn't work without a mail home directory set
  - mbox: Deleting a mailbox didn't delete its index files.
  - pop3c: TOP command was sent incorrectly
  - trash plugin didn't work properly
  - LMTP: Don't add a duplicate Return-Path: header when proxying.
  - listescape: Don't unescape namespace prefixes.

-------------------------------------------------------------------
Mon Apr  9 17:04:54 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.4:
  + Added mail_temp_scan_interval setting and changed its default value
    from 8 hours to 1 week.
  + Added pop3-migration plugin for easily doing a transparent IMAP+POP3
    migration to Dovecot: http://wiki2.dovecot.org/Migration/Dsync
  + doveadm user: Added -m parameter to show some of the mail settings.
  - Proxying SSL connections crashed in v2.1.[23]
  - fts-solr: Indexing mail bodies was broken.
  - director: Several changes to significantly improve error handling
  - doveadm import didn't import messages' flags
  - mail_full_filesystem_access=yes was broken
  - Make sure IMAP clients can't create directories when accessing
    nonexistent users' mailboxes via shared namespace.
  - Dovecot auth clients authenticating via TCP socket could have failed
    with bogus "PID already in use" errors.

-------------------------------------------------------------------
Fri Mar 16 17:22:37 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.3:
  - Do not use v2.1.2 with multi-dbox format, it's broken.

-------------------------------------------------------------------
Thu Mar 15 15:54:04 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.2:
  + Initial implementation of dsync-based replication. For now this
    should be used only on non-critical systems.
  + Proxying: POP3 now supports sending remote IP+port from proxy to
    backend server via Dovecot-specific XCLIENT extension.
  + Proxying: proxy_maybe=yes with host=<hostname> (instead of IP)
    works now properly.
  + Proxying: Added auth_proxy_self setting
  + Proxying: Added proxy_always extra field (see wiki docs)
  + Added director_username_hash setting to specify what part of the
    username is hashed. This can be used to implement per-domain
    backends (which allows safely accessing shared mailboxes within
    domain).
  + Added a "session ID" string for imap/pop3 connections, available
    in %{session} variable. The session ID passes through Dovecot
    IMAP/POP3 proxying to backend server. The same session ID is can be
    reused after a long time (currently a bit under 9 years).
  + passdb checkpassword: Support "credentials lookups" (for
    non-plaintext auth and for lmtp_proxy lookups)
  + fts: Added fts_index_timeout setting to abort search if indexing
    hasn't finished by then (default is to wait forever).
  - doveadm sync: If mailbox was expunged empty, messages may have
    become back instead of also being expunged in the other side.
  - director: If user logged into two directors while near user
    expiration, the directors might have redirected the user to two
    different backends.
  - imap_id_* settings were ignored before login.
  - Several fixes to mailbox_list_index=yes
  - Previous v2.1.x didn't log all messages at shutdown.
  - mbox: Fixed accessing Dovecot v1.x mbox index files without errors. 

-------------------------------------------------------------------
Thu Feb 23 14:39:51 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.1:
  + dsync: If message with same GUID is saved multiple times in session,
    copy it instead of re-saving.
  - acl plugin + autocreated mailboxes crashed when listing mailboxes
  - doveadm force-resync: Don't skip autocreated mailboxes (especially
    INBOX).
  - If process runs out of fds, stop listening for new connections only
    temporarily, not permanently (avoids hangs with process_limit=1
    services)
  - auth: passdb imap crashed for non-login authentication (e.g. smtp).

-------------------------------------------------------------------
Thu Feb 16 21:42:23 UTC 2012 - alexandre@exatati.com.br

- Update Pigeonhole to 0.3 and match Dovecot release:
  * Renamed sieve_global_path setting to sieve_default for clarity. Old
    name is still recognized for backwards compatibility. Support for
    the ancient (pre v1.1) name for this setting "global_script_path" is
    now dropped.
  * Added means to prohibit use of redirect action. Setting
    sieve_max_redirects to 0 now means that redirect is disallowed in
    stead of unlimited. Default value remains four.
  * Fixed interaction of Sieve include extension with ManageSieve. It is
    updated to match new requirements in the draft include
    specification. Missing included scripts are no longer an error at
    upload time.
  * Updated RFC2822 header field body verification to exclude
    non-printing characters (RFC5322). Only Sieve actions that can
    create unstructured header values (currently enotify/mailto and
    editheader) are affected by this change.
  + Completed sieve-filter tool to a useful state. The sieve-filter tool
    provides a means to (re)filter messages in a mailbox through a Sieve
    script.
  + Implemented the Sieve editheader extension. It is now possible to
    add and remove message headers from within Sieve.
  + ManageSieve: added support for reading quoted and literal strings as
    a stream. Fixes support for handing large SASL responses (analogous
    to similar changes in Dovecot). It is now also allowed to use a
    quoted string for the  PUTSCRIPT script argument.
  + Added code to cleanup tmp directory in Sieve storage directory
    (sieve_dir) every once in a while.
  + Added support for substituting the entire message during Sieve
    processing. This is used for the filter action provided by the new
    sieve_extprograms plugin (provided separately for now). The filter
    action allows passing the message through an external program.
  + Added support for restricting certain Sieve language extensions to
    (admin-controled) global scripts. Restricted extensions can be
    configured using the new sieve_global_extensions setting. This is
    particularly useful for some of the Dovecot-specific (plugin-based)
    Sieve extensions, that can be somewhat hazardous when under direct
    control of users (e.g. sieve_extprograms).

-------------------------------------------------------------------
Thu Feb 16 17:56:46 UTC 2012 - alexandre@exatati.com.br

- Update to 2.1.0:
  - FS layout related crashfix;
  - two man pages added.
- Add autogen to BuildRequires to fix Factory builds.

-------------------------------------------------------------------
Wed Feb 15 22:08:26 UTC 2012 - alexandre@exatati.com.br

- Update to RC7:
  + Added ignore_on_failure setting for namespaces. If namespace
    initialization fails with this enabled (e.g. permission denied),
    the namespace is silently skipped for the user.

-------------------------------------------------------------------
Mon Feb 13 01:46:07 UTC 2012 - alexandre@exatati.com.br

- Update to RC6:
  * Added automatic mountpoint tracking and doveadm mount commands to
    manage the list. If a mountpoint is unmounted, error handling is
    done by assuming that the files are only temporarily lost. This is
    especially helpful if dbox alt storage becomes unmounted.
  * Expire plugin: Only go through users listed by userdb iteration.
    Delete dict rows for nonexistent users, unless
    expire_keep_nonexistent_users=yes.
  * LDA's out-of-quota mails now include DSN report instead of MDN.
  + LDAP: Allow building passdb/userdb extra fields from multiple LDAP
    attributes by using %{ldap:attributeName} variables in the template.
  + doveadm log errors shows the last 1000 warnings and errors since
    Dovecot was started.
  + Improved multi-instance support: Track automatically which instances
    are started up and manage the list with doveadm instance commands.
    All Dovecot commands now support -i <instance_name> parameter to
    select the instance (instead of having to use -c <config path>).
    See instance_name setting.
  + doveadm mailbox delete: Added -r parameter to delete recursively
  + doveadm acl: Added "add" and "remove" commands.
  + Updated to Unicode v6.1
  - mdbox: When saving to alt storage, Dovecot didn't append as much
    data to m.* files as it could have.
  - dbox: Fixed error handling when saving failed or was aborted
  - IMAP: Using COMPRESS extension may have caused assert-crashes
  - IMAP: THREAD REFS sometimes returned invalid (0) nodes.
  - dsync: Fixed handling non-ASCII characters in mailbox names.- 
- Update Pigeonhole to latest hg sources;
- Remove PIE patch from spec file and sources as it is a compilation
  flag now.

-------------------------------------------------------------------
Thu Jan 26 11:21:26 UTC 2012 - alexandre@exatati.com.br

- Update to RC5:
  * Temporary authentication failures sent to IMAP/POP3 clients
    now includes the server's hostname and timestamp. This makes it
    easier to find the error message from logs.
  + auth: Implemented support for Postfix's "TCP map" sockets for
    user existence lookups.
  + auth: Idling auth worker processes are now stopped. This reduces
    error messages about MySQL disconnections.
  - director: With >2 directors ring syncing might have stalled during
    director connect/disconnect, causing logins to fail.
  - LMTP client/proxy: Fixed potential hanging when sending (big) mails
  - Compressed mails with external attachments (dbox + SIS + zlib) failed
    sometimes with bogus "cached message size wrong" errors. 

-------------------------------------------------------------------
Fri Jan  6 19:25:51 UTC 2012 - alexandre@exatati.com.br

- Start packaging dovecot21 series using dovecot20 (at 2.0.17) spec
  file as base;
- Start dovecot21 with dovecot-2.1.rc2.
openSUSE Build Service is sponsored by