File dhcp.spec of Package dhcp

#
# spec file for package dhcp (Version 3.1.1)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild


Name:           dhcp
%define susefw2dir %{_sysconfdir}/sysconfig/SuSEfirewall2.d/services
%define omc_prefix /usr/share/omc
%define omc_svcdir %{omc_prefix}/svcinfo.d
%define with_casa 0
%if %{?with_casa:%with_casa}
BuildRequires:  CASA-devel
%endif
BuildRequires:  dos2unix openldap2-devel
License:        BSD 3-Clause
Group:          Productivity/Networking/Boot/Servers
AutoReqProv:    on
Version:        3.1.1
Release:        6.<RELEASE6>
Summary:        Common Files Used by ISC DHCP Software
Url:            http://www.isc.org/isc/dhcp.html
Source0:        http://ftp.isc.org/isc/dhcp/dhcp-%{version}.tar.gz
Source1:        http://ftp.isc.org/isc/dhcp/dhcp-%{version}.tar.gz.asc
Source2:        rc.dhcpd
Source3:        rc.dhcrelay
Source11:       sysconfig.dhcpd
Source12:       sysconfig.syslog-dhcpd
Source14:       sysconfig.dhcrelay
Source15:       dhcp.README
Source16:       dhcp.LIESMICH
Source17:       examples.tar.gz
Source18:       dhcp.README.upgrade
Source19:       dhcpsync
Source20:       dhcpsync.8
Source21:       DDNS-howto.txt
Source30:       http://www.andrew.cmu.edu/~kevinm/dhcp/leasestate
Source31:       http://www.andrew.cmu.edu/~kevinm/dhcp/listlease
Source32:       http://www.andrew.cmu.edu/~kevinm/dhcp/clearip
Source33:       http://www.andrew.cmu.edu/~kevinm/dhcp/reset-ip
Source40:       http://www3.baylor.edu/~Jeff_Wilson/GiveAway/leases.awk
Source41:       http://www.suse.de/~poeml/dnscompr.py
Source42:       dhcpd.xml
Source43:       SuSEfirewall2.dhcp-server
Patch0:         dhcp-3.1.1-paths.dif
## chroot patch by Ari Edelkind (see readme)
## and patch supplied by <thomas@suse.de> 
Patch1:         dhcp-3.1.1-paranoia.dif
Patch2:         dhcp-3.1.1-omapi-test.c.dif
Patch3:         dhcp-3.1.1-man-includes.dif
Patch4:         dhcp-3.1.1-tmpfile.dif
## LDAP support for DHCP server
## patch lives here: http://home.ntelos.net/~masneyb/
%define DHCPD_LDAP 1
%if %DHCPD_LDAP
Patch10:        dhcp-3.0.5-ldap-patch_3.1.1.bz2
Patch11:        dhcp-3.0.5-ldap-patch_object-order.dif
Patch12:        dhcp-3.0.5-ldap-patch_server_dn.dif
Patch13:        dhcp-3.0.5-ldap-patch_host_brace.dif
Patch14:        dhcp-3.0.6-ldap-patch_hwaddr-icase.dif
Patch15:        dhcp-3.0.6-ldap-patch_external-dn.diff
Patch16:        dhcp-3.1.1-ldap-patch_failover-obj.dif
Patch17:        dhcp-3.1.1-ldap-patch_service-assoc-msg.dif
%endif
%if %{?suse_version:%suse_version}%{?!suse_version:99999} > 930
Patch30:        dhcp-3.1.1-pie.dif
%endif
Patch40:        dhcp-3.1.1-dhclient-exec-filedes.dif
Patch41:        dhcp-3.1.1-dhclient-send-hostname-rml.dif
Patch42:        dhcp-3.1.1-dhclient-use-script-cmdline.dif
Patch43:        dhcp-3.1.1-dhclient-no-dereference-twice.dif
Patch50:        dhcp-3.1.1-dhclient-conf.dif
Patch60:        dhcp-3.1.1-dhclient-script.dif
Patch61:        dhcp-3.1.1-CVE-2009-0692.bnc515599.dif
Patch62:        dhcp-3.1.1-dhclient-option-checks.bnc675052.diff
##
Obsoletes:      dhcp-base
Provides:       dhcp-base:/usr/bin/omshell
PreReq:         /bin/touch /sbin/chkconfig sysconfig
BuildRoot:      %{_tmppath}/%{name}-%{version}-build

%package server
License:        BSD 3-Clause
Summary:        ISC DHCP Server
Group:          Productivity/Networking/Boot/Servers
Requires:       net-tools dhcp
PreReq:         %insserv_prereq %fillup_prereq /bin/cat /bin/mkdir /bin/cp /usr/sbin/useradd
Provides:       dhcp_server dhcp:/usr/sbin/dhcpd
AutoReqProv:    on

%package client
License:        BSD 3-Clause
Summary:        ISC DHCP Client
Group:          Productivity/Networking/Boot/Clients
Requires:       net-tools dhcp /usr/bin/host
PreReq:         %insserv_prereq %fillup_prereq /bin/cat /bin/mkdir /bin/cp 
Provides:       dhcp_client dhclient
Obsoletes:      dhclient
AutoReqProv:    on

%package relay
License:        BSD 3-Clause
Summary:        DHCP Relay Agent
Group:          Productivity/Networking/Boot/Servers
Requires:       net-tools dhcp
PreReq:         %insserv_prereq %fillup_prereq /bin/cat /bin/mkdir /bin/cp 
Provides:       dhcp_relay dhcrelay
Obsoletes:      dhcrelay
AutoReqProv:    on

%package devel
License:        BSD 3-Clause
Summary:        Header Files and Libraries for dhcpctl API
Group:          Development/Libraries/C and C++
Requires:       dhcp = %{version}
%if %ul_version >= 1
%define VENDOR UnitedLinux
%else
%define VENDOR SuSE
%endif

%description
This package contains common files used by both the ISC DHCP server
("dhcp-server" package) and client ("dhcp-client").



Authors:
--------
    Ted Lemon <mellon@fugue.com>

%description server
This package contains the ISC DHCP server.

Please read the documentation in /usr/share/doc/packages/dhcp-server
regarding configuration of the DHCP server.



Authors:
--------
    Ted Lemon <mellon@fugue.com>
    
    This package also contains software written by Kevin C. Miller <kevinm@andrew.cmu.edu> 
    and Jeff Wilson <wilsonj@cs.ecs.baylor.edu>.

%description client
This is an alternative DHCP client, the ISC DHCP client for Linux. Like
"dhcpcd" (the client that is installed by default), it can be used to
configure the network setup.  IP address, hostname, routing,
nameserver, netmask, and broadcast can be dynamically assigned while
booting the machine.

It is configurable via the configuration file /etc/dhclient.conf and
you can define your own 'hooks' to be used by the /sbin/dhclient-script
(which is called by the daemon).



Authors:
--------
    Ted Lemon <mellon@fugue.com>

%description relay
This is the ISC DHCP relay agent. It can be used as a 'gateway' for
DHCP messages across physical network segments. This is necessary
because requests can be broadcast, and they will normally not be
routed.



%description devel
This package contains all of the libraries and headers for developing
with the Internet Software Consortium (ISC) dhcpctl API.



Authors:
--------
    Ted Lemon <mellon@fugue.com>

%prep
%setup -q -n %{name}-%{version}
##
%patch0 -p0
%patch1 -p0
%patch2 -p0
%patch3 -p0
%patch4 -p0
%if %DHCPD_LDAP
%patch10 -p1
%patch11 -p0
%patch12 -p0
%patch13 -p0
%patch14 -p0
%patch15 -p0
%patch16 -p0
%patch17 -p0
%endif
%if %{?suse_version:%suse_version}%{?!suse_version:99999} > 930
%patch30 -p0
%endif
%patch40 -p0
%patch41 -p0
%patch42 -p0
%patch43 -p0
%patch50 -p0
%patch60 -p0
%patch61 -p0
%patch62 -p1
##
find . -type f -name \*.cat\* -exec rm -f {} \;
cp -p %{S:2} %{S:3} %{S:11} %{S:12} %{S:14} %{S:32} %{S:33} . 
for i in README LIESMICH; do
sed 's/SuSE/%VENDOR/' $RPM_SOURCE_DIR/dhcp.$i > $i.%VENDOR
done
cp -p $RPM_SOURCE_DIR/dhcp.README.upgrade README.upgrade
cp -p $RPM_SOURCE_DIR/DDNS-howto.txt .
echo "exec /usr/bin/genDDNSkey \"$@\"" > genDDNSKey.sh
tar xzf $RPM_SOURCE_DIR/examples.tar.gz
dos2unix contrib/ms2isc/*

%build
export CFLAGS
CFLAGS="$RPM_OPT_FLAGS -W -Wall -fno-strict-aliasing -Wno-unused -DEXTENDED_NEW_OPTION_INFO -DLDAP_DEPRECATED -DUSE_SSL -DPARANOIA"
%if %{?with_casa:%with_casa}
  CFLAGS="$CFLAGS -DLDAP_CASA_AUTH"
%endif
# seems obsolete (redefined reports) => double check
#%ifarch ia64 sparc64 alpha s390x ppc64 x86_64
#  CFLAGS="$CFLAGS -DPTRSIZE_64BIT" 
#%endif
%ifarch ppc ppc64 s390x
  # bugs 134590, 171532
  CFLAGS="$CFLAGS -fsigned-char"
%endif
%if %{?suse_version:%suse_version}%{?!suse_version:99999} > 930
%ifarch ia64 sparc64 alpha s390x ppc64 x86_64
  CFLAGS="$CFLAGS -fPIE" 
%else
  CFLAGS="$CFLAGS -fpie" 
%endif
%endif
export DEBUG_FLAGS=$CFLAGS
./configure
# first, build binaries which use bsd sockets instead of lpf
cp includes/site.h includes/site.h.save.lpf
echo "#define USE_SOCKETS" >> includes/site.h
make DEBUG="$DEBUG_FLAGS -W" all
cp -p work.linux-2.2/server/dhcpd work.linux-2.2/server/dhcpd.bsd
make clean
# then, build the normal binaries using lpf
mv includes/site.h.save.lpf includes/site.h
make DEBUG="$DEBUG_FLAGS -W" all 
# with a minimal config, see if it runs
echo "ddns-update-style interim;" > testconf
work.linux-2.2/server/dhcpd -t -cf testconf || exit 1

%install
MANDIR=%{_mandir} DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir} make install
install -m 744 work.linux-2.2/omapip/svtest $RPM_BUILD_ROOT/usr/sbin/svtest
install -m 644 work.linux-2.2/dst/libdst.a $RPM_BUILD_ROOT/%{_libdir}
# install the saved bsd flavor binary
install -m 755 work.linux-2.2/server/dhcpd.bsd $RPM_BUILD_ROOT/usr/sbin/dhcpd.bsd
mkdir -p $RPM_BUILD_ROOT/etc/init.d
mkdir -p $RPM_BUILD_ROOT/%{susefw2dir}
mkdir -p $RPM_BUILD_ROOT/%{omc_svcdir}
mkdir -p $RPM_BUILD_ROOT/var/adm/fillup-templates
mkdir -p $RPM_BUILD_ROOT/var/run
# set up chroot jail
mkdir -p $RPM_BUILD_ROOT/var/lib/dhcp/etc
mkdir -p $RPM_BUILD_ROOT/var/lib/dhcp/dev
mkdir -p $RPM_BUILD_ROOT/var/lib/dhcp/%_lib
mkdir -p $RPM_BUILD_ROOT/var/lib/dhcp/var/run
mkdir -p $RPM_BUILD_ROOT/var/lib/dhcp/db
%if %DHCPD_LDAP
mkdir -p $RPM_BUILD_ROOT/etc/openldap/schema
install -m 644 contrib/dhcp.schema $RPM_BUILD_ROOT/etc/openldap/schema/
%endif
install -m 744 rc.dhcpd    $RPM_BUILD_ROOT/etc/init.d/dhcpd
install -m 744 rc.dhcrelay $RPM_BUILD_ROOT/etc/init.d/dhcrelay
ln -sf ../../etc/init.d/dhcpd    $RPM_BUILD_ROOT/usr/sbin/rcdhcpd
ln -sf ../../etc/init.d/dhcrelay $RPM_BUILD_ROOT/usr/sbin/rcdhcrelay
install -m 755 $RPM_SOURCE_DIR/dhcpsync   $RPM_BUILD_ROOT/usr/sbin/
install -m 644 $RPM_SOURCE_DIR/dhcpsync.8 $RPM_BUILD_ROOT/%{_mandir}/man8/
install -m 755 $RPM_SOURCE_DIR/leasestate $RPM_BUILD_ROOT/usr/sbin/
install -m 755 $RPM_SOURCE_DIR/listlease  $RPM_BUILD_ROOT/usr/sbin/
install -m 755 $RPM_SOURCE_DIR/leases.awk $RPM_BUILD_ROOT/usr/sbin/
cp -p $RPM_SOURCE_DIR/dnscompr.py .
install -m 644 sysconfig.dhcpd		$RPM_BUILD_ROOT/var/adm/fillup-templates/
install -m 644 sysconfig.syslog-dhcpd	$RPM_BUILD_ROOT/var/adm/fillup-templates/
install -m 644 sysconfig.dhcrelay	$RPM_BUILD_ROOT/var/adm/fillup-templates/
rm -f $RPM_BUILD_ROOT/var/lib/dhcp/dhcpd.leases
touch $RPM_BUILD_ROOT/var/lib/dhcp/dhclient.leases
install -m 644 client/dhclient.conf $RPM_BUILD_ROOT/etc/dhclient.conf
sed '/^max-lease-time/ a \
\
# if you do not use dynamical DNS updates:\
#\
# this statement is needed by dhcpd-3 needs at least this statement.\
# you have to delete it for dhcpd-2, because it does not know it.\
#\
# if you want to use dynamical DNS updates, you should first read\
# read /usr/share/doc/packages/dhcp-server/DDNS-howto.txt\
ddns-update-style none; ddns-updates off;\
' server/dhcpd.conf > dhcpd.conf 
install -m644 contrib/3.0b1-lease-convert 3.0b1-lease-convert
find $RPM_BUILD_ROOT/%{_mandir} -type f | xargs chmod 644 
install -m 644 $RPM_SOURCE_DIR/dhcpd.xml $RPM_BUILD_ROOT/%{omc_svcdir}/
install -m 644 $RPM_SOURCE_DIR/SuSEfirewall2.dhcp-server \
               $RPM_BUILD_ROOT/%{susefw2dir}/dhcp-server

%pre
# In the past, the name of the source package was "dhcp" but the subpackage
# with the common files was named "dhcp-base" -- thus, no subpackage had the
# same name as the parent package. This lead to trouble on various ends, like
# the putonftp mechanism, so "dhcp-base" was renamed to "dhcp".
#
# During a YaST system update, the first package to be updated is "dhcp", which
# should --and does-- obsolete the dhcp-base package. 
# However, if RPMv4 is used, there is a peculiarity: RPMv4 automatically
# invents an 'obsolete' when it sees a 'provides'. 
# Since the old dhcp-server package (SLES8) did provide
#        Provides:     dhcp_server dhcp:/usr/sbin/dhcpd dhcp
# RPMv4 removes the dhcp-server package.
# 
# This in itself is not a problem because the package is re-installed later
# (RPMv4 is not that intelligent). However, if the service is destined to be
# started at boot time, the runlevel links will be gone, so the service will
# not be started after the update. To restore the links, there is no better way
# than remember that the service was running before updating the "dhcp" package,
# and restore the links at "dhcp-server" installation time.
if [ ${1:-0} -gt 1 ]; then 	# update
	if sbin/chkconfig -c dhcpd; then
		touch var/adm/dhcpd_needs_insserv
	fi
fi

%pre server
/usr/sbin/useradd -r -g nogroup -s /bin/false -c "DHCP server daemon" -d /var/lib/dhcp dhcpd 2> /dev/null ||:
if [ ! -x usr/sbin/dhcpd.lpf -a \
     ! -d usr/share/doc/packages/dhcp-server/ms2isc ]; then
	# usr/sbin/dhcpd.lpf was added _after_ release of 9.1;
	# usr/share/doc/packages/dhcp-server/ms2isc was added with 9.0;
	# thus, if both are not present we are updating from pre 9.0 AND
	# we are NOT updating a 9.1 released package (that has not been updated before).
	# 9.0 already had a binary compiled with BSD sockets.
	touch etc/dhcpd_updating_from_lpf_style
fi

%post server
%{fillup_and_insserv -n dhcpd dhcpd}
%{fillup_only -ans syslog dhcpd}
if grep -q '^DHCPD_RUN_AS="nobody"' etc/sysconfig/dhcpd; then
	tmpfile=$(mktemp -q etc/sysconfig/dhcpd.XXXXXX)
	sed 's|^DHCPD_RUN_AS="nobody"|DHCPD_RUN_AS="dhcpd"|' etc/sysconfig/dhcpd \
	  > $tmpfile && mv $tmpfile etc/sysconfig/dhcpd
	rm -f $tmpfile
fi
# update?
if [ ${FIRST_ARG:-0} -gt 1 ]; then
	if [ -e etc/dhcpd_updating_from_lpf_style -a -x usr/sbin/dhcpd.lpf ]; then
		if /etc/init.d/dhcpd status &>/dev/null; then
			was_running=true
			/etc/init.d/dhcpd stop
		else
			was_running=false
		fi
		tmpfile=$(mktemp -q etc/sysconfig/dhcpd.XXXXXX)
		sed 's|^DHCPD_BINARY=""|DHCPD_BINARY="/usr/sbin/dhcpd.lpf"|' etc/sysconfig/dhcpd \
		  > $tmpfile && mv $tmpfile etc/sysconfig/dhcpd
		rm -f $tmpfile
		if $was_running; then
			/etc/init.d/dhcpd start
		fi
	fi
	# see comment above
	if [ -f var/adm/dhcpd_needs_insserv ]; then
		sbin/insserv dhcpd
		rm var/adm/dhcpd_needs_insserv
	fi
fi
rm -f etc/dhcpd_updating_from_lpf_style
test -s etc/dhcpd.conf || { cp -p usr/share/doc/packages/dhcp-server/dhcpd.conf etc/; }
exit 0

%postun server
%restart_on_update dhcpd
%insserv_cleanup

%preun server
%stop_on_removal dhcpd

%post relay
%{fillup_and_insserv -n dhcrelay dhcrelay}

%postun relay
%restart_on_update dhcrelay
%insserv_cleanup

%preun relay
%stop_on_removal dhcrelay

%clean
if ! test -f /.buildenv; then rm -rf $RPM_BUILD_ROOT; fi

%files
%defattr(-,root,root)
%doc LICENSE README RELNOTES doc 
/usr/bin/omshell
%dir /var/lib/dhcp
%doc %{_mandir}/man1/omshell.1.gz
%doc %{_mandir}/man5/dhcp-eval.5.gz
%{susefw2dir}/dhcp-server

%files server
%defattr(-,root,root)
%doc clearip reset-ip
%doc dnscompr.py
/usr/sbin/dhcpd
/usr/sbin/dhcpd.bsd
/usr/sbin/rcdhcpd
/usr/sbin/svtest
%config /usr/sbin/dhcpsync
%config /usr/sbin/leasestate
%config /usr/sbin/listlease
%config /usr/sbin/leases.awk
%config /etc/init.d/dhcpd
%dir /var/lib/dhcp/var
%dir /var/lib/dhcp/var/run
%attr(755,dhcpd,root) %dir /var/lib/dhcp/db
%dir /var/lib/dhcp/etc
%dir /var/lib/dhcp/dev
%doc %{_mandir}/man5/dhcpd.conf.5.gz
%doc %{_mandir}/man5/dhcp-options.5.gz
%doc %{_mandir}/man5/dhcpd.leases.5.gz
%doc %{_mandir}/man8/dhcpd.8.gz
%doc %{_mandir}/man8/dhcpsync.8.gz
%doc dhcpd.conf LIESMICH.%VENDOR README.%VENDOR README.upgrade 3.0b1-lease-convert DDNS-howto.txt genDDNSKey.sh
%doc examples
%doc contrib/ms2isc
%if %DHCPD_LDAP
%doc contrib/dhcp.schema
%doc contrib/dhcpd-conf-to-ldap.pl
%doc README.ldap doc/draft-ietf-dhc-ldap-schema-01.txt
%dir /etc/openldap
%dir /etc/openldap/schema
%attr(0644, root, root) %config /etc/openldap/schema/dhcp.schema
%endif
/var/adm/fillup-templates/sysconfig.dhcpd
/var/adm/fillup-templates/sysconfig.syslog-dhcpd
%dir /var/lib/dhcp/%_lib
%{omc_svcdir}/dhcpd.xml

%files client 
%defattr(-,root,root)
/sbin/dhclient
/sbin/dhclient-script
%config(noreplace) /etc/dhclient.conf
%config(noreplace) /var/lib/dhcp/dhclient.leases
%doc %{_mandir}/man5/dhclient.conf.5.gz
%doc %{_mandir}/man5/dhclient.leases.5.gz
%doc %{_mandir}/man8/dhclient.8.gz
%doc %{_mandir}/man8/dhclient-script.8.gz

%files relay 
%defattr(-,root,root)
/usr/sbin/dhcrelay
/usr/sbin/rcdhcrelay
%config /etc/init.d/dhcrelay
%doc %{_mandir}/man8/dhcrelay.8.gz
/var/adm/fillup-templates/sysconfig.dhcrelay

%files devel
%defattr(-,root,root)
%_libdir/lib*
%{_prefix}/include/*
%doc %{_mandir}/man3/omshell.3.gz
%doc %{_mandir}/man3/omapi.3.gz
%doc %{_mandir}/man3/dhcpctl.3.gz

%changelog