File exim.changes of Package exim.import4507

-------------------------------------------------------------------
Fri May  6 18:18:00 UTC 2011 - lars@samba.org

- Don't pass DKIM compound log line as format string; (beo#1106); (bnc#692227).

-------------------------------------------------------------------
Fri Feb  4 22:13:39 UTC 2011 - lars@samba.org

- Workround for PCRE version dependancy in version reporting; (beo#1073).

-------------------------------------------------------------------
Fri Feb  4 19:33:40 UTC 2011 - lars@samba.org

- update to 4.74
  - Failure to get a lock on a hints database can have serious
    consequences so log it to the panic log.
  - Log LMTP confirmation messages in the same way as SMTP,
    controlled using the smtp_confirmation log selector.
  - Include the error message when we fail to unlink a spool file.
  - Bugzilla 139: Support dynamically loaded lookups as modules.
  - Bugzilla 139: Documentation and portability issues.
    Avoid GNU Makefile-isms, let Exim continue to build on BSD.
    Handle per-OS dynamic-module compilation flags.
  - Let /dev/null have normal permissions.
    The 4.73 fixes were a little too stringent and complained about the
    permissions on /dev/null.  Exempt it from some checks.
  - Report version information for many libraries, including
    Exim version information for dynamically loaded libraries.  Created
    version.h, now support a version extension string for distributors
    who patch heavily. Dynamic module ABI change.
  - CVE-2011-0017 - check return value of setuid/setgid. This is a
    privilege escalation vulnerability whereby the Exim run-time user
    can cause root to append content of the attacker's choosing to
    arbitrary files.
  - Bugzilla 1041: merged DCC maintainer's fixes for return code.
  - Bugzilla 1071: fix delivery logging with untrusted macros.
    If dropping privileges for untrusted macros, we disabled normal logging
    on the basis that it would fail; for the Exim run-time user, this is not
    the case, and it resulted in successful deliveries going unlogged.
- update to 4.73
  - Date: & Message-Id: revert to normally being appended to a message,
    only prepend for the Resent-* case.  Fixes regression introduced in
    Exim 4.70 by NM/22 for Bugzilla 607.
  - Include check_rfc2047_length in configure.default because we're seeing
    increasing numbers of administrators be bitten by this.
  - Added DISABLE_DKIM and comment to src/EDITME
  - Bugzilla 994: added openssl_options main configuration option.
  - Bugzilla 995: provide better SSL diagnostics on failed reads.
  - Bugzilla 834: provide a permit_coredump option for pipe transports.
  - Adjust NTLM authentication to handle SASL Initial Response.
  - If TLS negotiated an anonymous cipher, we could end up with SSL but
    without a peer certificate, leading to a segfault because of an
    assumption that peers always have certificates.  Be a little more
    paranoid.  Problem reported by Martin Tscholak.
  - Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
    filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
    NB: ClamAV planning to remove STREAM in "middle of 2010".
    CL also introduces -bmalware, various -d+acl logging additions and
    more caution in buffer sizes.
  - Implemented reverse_ip expansion operator.
  - Bugzilla 937: provide a "debug" ACL control.
  - Bugzilla 922: Documentation dusting, patch provided by John Horne.
  - Bugzilla 973: Implement --version.
  - Bugzilla 752: Refuse to build/run if Exim user is root/0.
  - Build without WITH_CONTENT_SCAN. Path from Andreas Metzler.
  - Bugzilla 816: support multiple condition rules on Routers.
  - Add bool_lax{} expansion operator and use that for combining multiple
    condition rules, instead of bool{}.  Make both bool{} and bool_lax{}
    ignore trailing whitespace.
  - prevent non-panic DKIM error from being sent to paniclog
  - added tcp_wrappers_daemon_name to allow host entries other than
    "exim" to be used
  - Fix malware regression for cmdline scanner introduced in PP/08.
    Notification from Dr Andrew Aitchison.
  - Change ClamAV response parsing to be more robust and to handle ClamAV's
    ExtendedDetectionInfo response format.
    Notification from John Horne.
  - OpenSSL 1.0.0a compatibility const-ness change, should be backwards
    compatible.
  - Added a CONTRIBUTING file.  Fixed the documentation build to use http:
    XSL and documented dependency on system catalogs, with examples of how
    it normally works.
  - Added Valgrind hooks in store.c to help it capture out-of-bounds store
    access.
  - Bugzilla 1044: CVE-2010-4345 - partial fix: restrict default behaviour
    of CONFIGURE_OWNER and CONFIGURE_GROUP options to no longer allow a
    configuration file which is writeable by the Exim user or group.
  - Bugzilla 1044: CVE-2010-4345 - part two: extend checks for writeability
    of configuration files to cover files specified with the -C option if
    they are going to be used with root privileges, not just the default
    configuration file.
  - Bugzilla 1044: CVE-2010-4345 - part three: remove ALT_CONFIG_ROOT_ONLY
    option (effectively making it always true).
  - Add TRUSTED_CONFIG_PREFIX_FILE option to allow alternative configuration
    files to be used while preserving root privileges.
  - Set FD_CLOEXEC on SMTP sockets after forking in the daemon, to ensure
    that rogue child processes cannot use them.
  - Bugzilla 1047: change the default for system_filter_user to be the Exim
    run-time user, instead of root.
  - Add WHITELIST_D_MACROS option to let some macros be overriden by the
    Exim run-time user without dropping privileges.
  - Remove use of va_copy() which breaks pre-C99 systems. Duplicate the
    result string, instead of calling string_vformat() twice with the same
    arguments.
  - Allow TRUSTED_CONFIG_PREFIX_FILE only for Exim or CONFIGURE_OWNER, not
    for other users. Others should always drop root privileges if they use
    -C on the command line, even for a whitelisted configure file.
  - Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
  - Fixed bug #1002 - Message loss when using multiple deliveries

-------------------------------------------------------------------
Fri Feb  4 15:19:44 UTC 2011 - lars@samba.org

- Check return values of setgid/setuid; CVE-2011-0017; (bnc#668599).

-------------------------------------------------------------------
Fri Dec 10 20:51:18 UTC 2010 - lars@samba.org

- Fix memory corruption in string_format code for pre-11.3 systems;
  CVE-2010-4344; (beo#787); (bnc#658731).
- Fix remote root vulnerability; CVE-2010-4345; (bnc#658731).

-------------------------------------------------------------------
Wed Jul 14 10:45:19 CEST 2010 - dmueller@suse.de

- fix mysql provides to be versioned again

-------------------------------------------------------------------
Tue Jun  8 15:36:36 UTC 2010 - poeml@cmdline.net

- update to 4.72
  - installed exipick 20100104.1, adding $max_received_linelength, $data_path,
    and $header_path variables; fixed documentation bugs and typos
  - installed exipick 20100222.0, added --input-dir and --finput to allow
    exipick to access non-standard spools, including the "frozen" queue
    (Finput)
  - Bugzilla 965: Support mysql stored procedures.  Patch from Alain Williams
  - Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD
  - Bugzilla 955: Documentation fix for max_rcpts.  Patch from Andreas Metzler
  - Bugzilla 954: Fix for unknown responses from Dovecot authenticator.  Patch
    from Kirill Miazine
  - Bugzilla 671: Added umask to procmail example.
  - installed exipick 20100323.0, fixing doc bug
  - Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail
    directory.  Notification and patch from Dan Rosenberg.
  - PDKIM: Upgrade PolarSSL files to upstream version 0.12.1.
  - Improve log output when DKIM signing operation fails.
  - Treat the transport option dkim_domain as a colon separated list, not as a
    single string, and sign the message with each element, omitting multiple
    occurences of the same signer.
  - Null terminate DKIM strings, Null initialise DKIM variable Bugzilla 985,
    986.  Patch by Simon Arlott
  - Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related) Patch by Simon
    Arlott
  - Bugzilla 989: CVE-2010-2024 - work round race condition on MBX locking.
    Notification from Dan Rosenberg.

-------------------------------------------------------------------
Wed May 26 11:24:50 UTC 2010 - poeml@cmdline.net

- fix build of exim-mysql package by correcting path in postinstall script;
  patch kindly provided by Christian Schweingruber

-------------------------------------------------------------------
Tue Nov 24 14:09:54 UTC 2009 - poeml@cmdline.net

- update to 4.71
  Bugfixes over 4.70:
  * Bugzilla 912: Fix DKIM segfault on empty headers/body
  * Bugzilla 913: Documentation fix for gnutls_* options.
  * Bugzilla 722: Documentation for randint. Better randomness defaults.
  * Bugzilla 847: Enable DNSDB lookup by default.
  * Bugzilla 915: Flag broken perl installation during build.

-------------------------------------------------------------------
Sat Nov 14 10:54:59 UTC 2009 - poeml@cmdline.net

- update to 4.70
  This release is a combination feature and bug fix release. 
  The major new features are:-
   * Native DKIM support without an external library.
   * Experimental DCC support via dccifd (contributed by Wolfgang Breyha). 
  Other changes:-
   * PCRE is no longer included with the Exim distribution. You will
     need a separate PCRE library (and matching headers) to compile
     Exim. You will need to change your Local/Makefile to support
     this. Most modern systems have a packaged PCRE library,
     alternatively PCRE can be found at http://www.pcre.org/
   * Experimental Yahoo! Domainkeys support dropped in favor of
     native DKIM support. 
   * The documentation has been updated and regenerated.
  As usual, all changes are in the doc/ChangeLog file:
  http://vcs.exim.org/viewvc/exim/exim-doc/doc-txt/ChangeLog?view=markup&pathrev=exim_4_70

-------------------------------------------------------------------
Tue Jun  9 17:47:56 CEST 2009 - poeml@suse.de

- silence some rpmlint warnings, by removing executable permissions
  from utilities packaged under documentation. 
- in the exim-mysql package, remove the versioned Provides, because
  rpmlint doesn't like it at all.

-------------------------------------------------------------------
Wed Oct 29 18:39:31 CET 2008 - poeml@suse.de

- add Required-Stop to init script, as required by LSB.

-------------------------------------------------------------------
Wed Aug 20 16:22:17 CEST 2008 - poeml@suse.de

- also add "spamd postgresql mysql" to should-start and should-stop
  in the LSB headers of /etc/init.d/exim

-------------------------------------------------------------------
Mon Aug 18 12:00:46 CEST 2008 - poeml@suse.de

- fix init script LSB headers -- Should-Stop added

-------------------------------------------------------------------
Sun Jun 15 14:27:56 CEST 2008 - poeml@suse.de

- fix logic of decision (in logrotate snippet) whether to send the
  weekly reports 

-------------------------------------------------------------------
Fri Jan 25 23:22:38 CET 2008 - meissner@suse.de

- fixed an array overflow spotted by gcc4.3.

-------------------------------------------------------------------
Thu Jan 10 19:25:40 CET 2008 - poeml@suse.de

- update to 4.69, which is mainly a bug fix release (although there
  is also preliminary DKIM support available if compiled with
  appropriate flags, which we don't do). The major change is an
  update to the embedded PCRE library in response to security
  issues, which are not relevant here, since we link against the
  system pcre library, assuming that it has been fixed already.
  TK/01 Add preliminary DKIM support. Currently requires a forked version of
        ALT-N's libdkim that I have put here:
        http://duncanthrax.net/exim-experimental/
        Note to Michael Haardt: I had to rename some vars in sieve.c. They
        were called 'true' and it seems that C99 defines that as a reserved
        keyword to be used with 'bool' variable types. That means you could
        not include C99-style headers which use bools without triggering
        build errors in sieve.c.
  NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked
        as mailq or other aliases.  Changed the --help handling significantly
        to do whats expected.  exim_usage() emits usage/help information.
  SC/01 Added the -bylocaldomain option to eximstats.
  NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr
  NM/03 Bugzilla 613: Documentation fix for acl_not_smtp
  NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall)

-------------------------------------------------------------------
Fri Sep 28 01:55:04 CEST 2007 - poeml@suse.de

- add #include <abstractions/consoles> to apparmor profile, to
  allow for interactive usage (mailq, exim -M, ...)

-------------------------------------------------------------------
Thu Aug 30 17:37:17 CEST 2007 - poeml@suse.de

- update to 4.68
  PH/01 Another patch from the Sieve maintainer.
  PH/02 When an IPv6 address is converted to a string for single-key lookup
        in an address list (e.g. for an item such as "net24-dbm;/net/works"), 
        dots are used instead of colons so that keys in lsearch files need not
        contain colons. This was done some time before quoting was made available
        in lsearch files. However, iplsearch files do require colons in IPv6 keys
        (notated using the quote facility) so as to distinguish them from IPv4
        keys. This meant that lookups for IP addresses in host lists did not work
        for iplsearch lookups.
        This has been fixed by arranging for IPv6 addresses to be expressed with
        colons if the lookup type is iplsearch. This is not incompatible, because
        previously such lookups could never work.
        The situation is now rather anomolous, since one *can* have colons in
        ordinary lsearch keys. However, making the change in all cases is
        incompatible and would probably break a number of configurations.
  TK/01 Change PRVS address formatting scheme to reflect latests BATV draft
        version.
  MH/01 The "spam" ACL condition code contained a sscanf() call with a %s
        conversion specification without a maximum field width, thereby enabling
        a rogue spamd server to cause a buffer overflow. While nobody in their
        right mind would setup Exim to query an untrusted spamd server, an
        attacker that gains access to a server running spamd could potentially
        exploit this vulnerability to run arbitrary code as the Exim user.
  TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use
        $primary_hostname instead of what libspf2 thinks the hosts name is.
  MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for
        a directory entry by the name of the lookup key. Previously, if a   
        symlink pointed to a non-existing file or a file in a directory that
        Exim lacked permissions to read, a lookup for a key matching that
        symlink would fail. Now it is enough that a matching directory entry
        exists, symlink or not. (Bugzilla 503.)
  PH/03 The body_linecount and body_zerocount variables are now exported in the
        local_scan API.
  PH/04 Added the $dnslist_matched variable.
  PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client.
        This means they are set thereafter only if the connection becomes
        encrypted.
  PH/06 Added the client_condition to authenticators so that some can be skipped
        by clients under certain conditions.
  PH/07 The error message for a badly-placed control=no_multiline_responses left
        "_responses" off the end of the name.
  PH/08 Added -Mvc to output a copy of a message in RFC 2822 format.
  PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly
        (without spaces) instead of just copying the configuration text.
  PH/10 Added the /noupdate option to the ratelimit ACL condition.
  PH/11 Added $max_received_linelength.
  PH/12 Added +ignore_defer and +include_defer to host lists.
  PH/13 Installed PCRE version 7.2. This needed some changes because of the new
        way in which PCRE > 7.0 is built.
  PH/14 Implemented queue_only_load_latch.
  PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a
        MAIL command. The effect was to mangle the value on 64-bit systems.
  PH/16 Another patch from the Sieve maintainer.
  PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper.
  PH/18 If a system quota error occurred while trying to create the file for
        a maildir delivery, the message "Mailbox is full" was not appended to the
        bounce if the delivery eventually timed out. Change 4.67/27 below applied
        only to a quota excession during the actual writing of the file.
  PH/19 It seems that peer DN values may contain newlines (and other non-printing
        characters?) which causes problems in log lines. The DN values are now
        passed through string_printing() before being added to log lines.
  PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle
        and InterBase are left for another time.)
  PH/21 Added message_body_newlines option.
  PH/22 Guard against possible overflow in moan_check_errorcopy().
  PH/23 POSIX allows open() to be a macro; guard against that.
  PH/24 If the recipient of an error message contained an @ in the local part
        (suitably quoted, of course), incorrect values were put in $domain and
        $local_part during the evaluation of errors_copy.

-------------------------------------------------------------------
Fri Aug 24 08:33:24 CEST 2007 - poeml@suse.de

- "Novell apparmor" doesn't own /etc/apparmor and
  /etc/apparmor/profiles... fix build in autobuild

-------------------------------------------------------------------
Thu Aug 23 13:19:32 CEST 2007 - poeml@suse.de

- do not install apparmor profile by default [#285727]

-------------------------------------------------------------------
Fri Jul 13 13:44:42 CEST 2007 - poeml@suse.de

- use the LSB equivalent Should-Start instead of
  X-UnitedLinux-Should-Start [#285553]

-------------------------------------------------------------------
Fri Jul 13 12:57:46 CEST 2007 - poeml@suse.de

- init script: add amavis to Should-Start [#285553]

-------------------------------------------------------------------
Thu May 31 02:29:50 CEST 2007 - poeml@suse.de

- improve apparmor profile: use abstractions/user-mail; allow
  procmail and cyrus deliver (assuming that their profiles are in
  effect as well)

-------------------------------------------------------------------
Thu May 24 16:40:10 CEST 2007 - poeml@suse.de

- add apparmor profile, active in "complain" mode once installed.
  Use logprof to check for needed adjustments. Use "enforce
  /usr/sbin/exim" to put the profile into effect.
- remove support for building on and updating from SuSE Linux 7.3
  and older

-------------------------------------------------------------------
Tue Apr 17 16:13:15 CEST 2007 - poeml@suse.de

- update to 4.67
  MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
        is unset (happens when testing with -bh and -oMi isn't used). Thanks to
        Jan Srzednicki.
  PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
        issue a MAIL command.
  PH/02 In an ACL statement such as
          deny dnslists = X!=127.0.0.2 : X=127.0.0.2
        if a client was not listed at all, or was listed with a value other than
        127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
        the condition was not true (as it should be), so access was not denied.
        The bug was that the ! inversion was incorrectly passed on to the second
        item. This has been fixed.
  PH/03 Added additional dnslists conditions == and =& which are different from
        = and & when the dns lookup returns more than one IP address.
  PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
        cipher suites used by GnuTLS. These options are ignored by OpenSSL.
  PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
        FSYNC, which compiles an option called disable_fsync that allows for
        bypassing fsync(). The documentation is heavily laced with warnings.
  SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
  PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
        with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
        to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
        including adding "make clean"; (3) Added -fPIC when compiling the test
        dynamically loaded module, to get rid of a warning.
  MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
        message fails, move_frozen_messages = true and ignore_bounce_errors_after
        = 0s. The bug is otherwise harmless.
  PH/07 There was a bug in the dovecot authenticator such that the value of
        $auth1 could be overwritten, and so not correctly preserved, after a
        successful authentication. This usually meant that the value preserved by
        the server_setid option was incorrect.
  PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
  PH/09 Installed PCRE release 7.0.
  PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being
        run for batched SMTP input. It is now run at the start of every message
        in the batch. While fixing this I discovered that the process information
        (output by running exiwhat) was not always getting set for -bs and -bS
        input. This is fixed, and it now also says "batched" for BSMTP.
  PH/11 Added control=no_pipelining.
  PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's
        patch, slightly modified), and move the expansion of helo_data till after
        the connection is made in the smtp transport (so it can use these
        values).
  PH/13 Added ${rfc2047d: to decoded RFC 2047 strings.
  PH/14 Added log_selector = +pid.
  PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set.
  PH/16 Add ${if forany and ${if forall.
  PH/17 Added dsn_from option to vary the From: line in DSNs.
  PH/18 Flush SMTP output before performing a callout, unless control =
        no_callout_flush is set.
  PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender
        was true (the default) a successful delivery failed to delete the retry
        item, thus causing premature timeout of the address. The bug is now
        fixed.
  PH/20 Added hosts_avoid_pipelining to the smtp transport.
  PH/21 Long custom messages for fakedefer and fakereject are now split up
        into multiline reponses in the same way that messages for "deny" and
        other ACL rejections are.
  PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
        with slight modification.
  PH/23 Applied sieve patches from the maintainer "tracking the latest notify
        draft, changing the syntax and factoring some duplicate code".
  PH/24 When the log selector "outgoing_port" was set, the port was shown as -1
        for deliveries of the second and subsequent messages over the same SMTP
        connection.
  PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and
        ${reduce, with only minor "tidies".
  SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match.
  PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its
        expansion side effects.
  PH/27 When a message times out after an over-quota error from an Exim-imposed
        quota, the bounce message says "mailbox is full". This message was not
        being given when it was a system quota that was exceeded. It now should
        be the same.
  MH/03 Made $recipients available in local_scan(). local_scan() already has
        better access to the recipient list through recipients_list[], but
        $recipients can be useful in postmaster-provided expansion strings.
  PH/28 The $smtp_command and $smtp_command_argument variables were not correct
        in the case of a MAIL command with additional options following the
        address, for example: MAIL FROM:<foo@bar> SIZE=1234. The option settings
        were accidentally chopped off.
  PH/29 SMTP synchronization checks are implemented when a command is read -
        there is a check that no more input is waiting when there shouldn't be
        any. However, for some commands, a delay in an ACL can mean that it is
        some time before the response is written. In this time, more input might
        arrive, invalidly. So now there are extra checks after an ACL has run for
        HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when
        pipelining has not been advertised.
  PH/30 MH's patch to allow iscntrl() characters to be list separators.
  PH/31 Unlike :fail:, a custom message specified with :defer: was not being
        returned in the SMTP response when smtp_return_error_details was false.
        This has been fixed.
  PH/32 Change the Dovecot authenticator to use read() and write() on the socket
        instead of the C I/O that was originally supplied, because problems were
        reported on Solaris.
  PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in
        Exim which did not show up earlier: it was assuming that a call to
        SSL_CTX_set_info_callback() might give an error value. In fact, there is
        no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback()
        was a macro that became an assignment, so it seemed to work. This has
        changed to a proper function call with a void return, hence the compile
        error. Exim's code has been fixed.
  PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit
        cpus.
  PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify".
  PH/36 Applied John Jetmore's patch to add -v functionality to exigrep.
  PH/37 If a message is not accepted after it has had an id assigned (e.g.
        because it turns out to be too big or there is a timeout) there is no
        "Completed" line in the log. When some messages of this type were
        selected by exigrep, they were listed as "not completed". Others were
        picked up by some special patterns. I have improved the selection
        criteria to be more general.
  PH/38 The host_find_failed option in the manualroute router can now be set
        to "ignore", to completely ignore a host whose IP address cannot be
        found. If all hosts are ignored, the behaviour is controlled by the new
        host_all_ignored option.
  PH/39 In a list of hosts for manualroute, if one item (either because of multi-
        homing or because of multiple MX records with /mx) generated more than
        one IP address, and the following item turned out to be the local host,
        all the secondary addresses of the first item were incorrectly removed
        from the list, along with the local host and any following hosts (which
        is what is supposed to happen).
  PH/40 When Exim receives a message, it writes the login name, uid, and gid of
        whoever called Exim into the -H file. In the case of the daemon it was
        behaving confusingly. When first started, it used values for whoever
        started the daemon, but after a SIGHUP it used the Exim user (because it
        calls itself on a restart). I have changed the code so that it now always
        uses the Exim user.
  PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a
        message are rejected with the same error (e.g. no authentication or bad
        sender address), and a DATA command is nevertheless sent (as can happen
        with PIPELINING or a stupid MUA), the error message that was given to the
        RCPT commands is included in the rejection of the DATA command. This is
        intended to be helpful for MUAs that show only the final error to their
        users.
  PH/42 Another patch from the Sieve maintainer.
  SC/02 Eximstats - Differentiate between permanent and temporary rejects.
        Eximstats - Fixed some broken HTML links and added missing column headers
                    (Jez Hancock).
        Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email
                    columns for Rejects, Temp Rejects, Ham, and Spam rows.
  SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables.
  PH/43 Yet another patch from the Sieve maintainer.
  PH/44 I found a way to check for a TCP/IP connection going away before sending
        the response to the final '.' that terminates a message, but only in the
        case where the client has not sent further data following the '.'
        (unfortunately, this is allowed). However, in many cases there won't be
        any further data because there won't be any more messages to send. A call
        to select() can be used: if it shows that the input is "ready", there is
        either input waiting, or the socket has been closed. An attempt to read
        the next input character can distinguish the two cases. Previously, Exim
        would have sent an OK response which the client would never have see.
        This could lead to message repetition. This fix should cure that, at
        least in a lot of common cases.
  PH/45 Do not advertise STARTTLS in response to HELP unless it would be
        advertised in response to EHLO.

-------------------------------------------------------------------
Fri Mar  9 10:59:59 CET 2007 - poeml@suse.de

- build fix for openssl-0.9.8e: SSL_CTX_set_info_callback is now a
  function with void return
- sync buildservice package with autobuild 

-------------------------------------------------------------------
Thu Jan 25 23:59:41 CET 2007 - sndirsch@suse.de

- move from /usr/X11R6 to /usr 

-------------------------------------------------------------------
Tue Jan  9 11:03:05 CET 2007 - poeml@suse.de

- update to 4.66
  PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
        fixed by 4.65/MH/01 (is this a record?) are fixed:
        (i)  An empty string was always treated as zero by the numeric comparison
             operators. This behaviour has been restored.
        (ii) It is documented that the numeric comparison operators always treat
             their arguments as decimal numbers. This was broken in that numbers
             starting with 0 were being interpreted as octal.
        While fixing these problems I realized that there was another issue that
        hadn't been noticed. Values of message_size_limit (both the global option
        and the transport option) were treated as octal if they started with 0.
        The documentation was vague. These values are now always treated as
        decimal, and I will make that clear in the documentation.

-------------------------------------------------------------------
Tue Jan  2 12:54:48 CET 2007 - poeml@suse.de

- update to 4.65
  TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
        Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
        versions. (#438)
  MH/01 Don't check that the operands of numeric comparison operators are
        integers when their expansion is in "skipping" mode (fixes bug
        introduced by 4.64-PH/07).
  PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
        child addresses, Exim now panics and dies. Previously, because the count
        is held in a short int, deliveries were likely to be lost. As such a
        large number of recipients for a single message is ridiculous
        (performance will be very, very poor), I have chosen to impose a limit
        rather than extend the field.

-------------------------------------------------------------------
Wed Dec 20 13:33:22 CET 2006 - poeml@suse.de

- update to 4.64
  TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
        leftover -K file (the existence of which was triggered by #402).
        While we were at it, introduced process PID as part of the -K
        filename. This should rule out race conditions when creating
        these files.
  TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
        processing considerably. Previous code took too long for large mails,
        triggering a timeout which in turn triggers #401.
  TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
        in the DK code in transports.c. sendfile() is not really portable,
        hence the _LINUX specificness.
  TF/01 In the add_headers option to the mail command in an Exim filter,
        there was a bug that Exim would claim a syntax error in any
        header after the first one which had an odd number of characters
        in the field name.
  PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
        callout verification, Exim cached a "reject" for the entire domain. This
        is correct for most verifications, but it is not correct for a recipient
        verification with use_sender or use_postmaster set, because in that case
        the callout does not use MAIL FROM:<>. Exim now distinguishes the special
        case of MAIL FROM:<> rejection from other early rejections (e.g.
        rejection of HELO). When verifying a recipient using a non-null MAIL
        address, the cache is ignored if it shows MAIL FROM:<> rejection.
        Whatever the result of the callout, the value of the domain cache is
        left unchanged (for any other kind of callout, getting as far as trying
        RCPT means that the domain itself is ok).
  PH/02 Tidied a number of unused variable and signed/unsigned warnings that
        gcc 4.1.1 threw up.
  PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
        manifest itself as EPIPE rather than ECONNECT. When tidying away a
        session, the daemon ignores ECONNECT errors and logs others; it now
        ignores EPIPE as well.
  PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
        (quoted-printable decoding).
  PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
        later the small subsequent patch to fix an introduced bug.
  PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
  PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
  PH/08 An error is now given if message_size_limit is specified negative.
  PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
        to be given (somewhat) arbitrary names.
  JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
        in 4.64-PH/09.
  JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
        miscellaneous code fixes
  PH/10 Added the log_reject_target ACL modifier to specify where to log
        rejections.
  PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
        hostname. This is wrong, because it relates to the incoming message (and
        probably the interface on which it is arriving) and not to the outgoing
        callout (which could be using a different interface). This has been
        changed to use the value of the helo_data option from the smtp transport
        instead - this is what is used when a message is actually being sent. If
        there is no remote transport (possible with a router that sets up host
        addresses), $smtp_active_hostname is used.
  PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
        tweaks were necessary in order to get it to work (see also 21 below):
        (a) The code assumed that strncpy() returns a negative number on buffer
            overflow, which isn't the case. Replaced with Exim's string_format()
            function.
        (b) There were several signed/unsigned issues. I just did the minimum
            hacking in of casts. There is scope for a larger refactoring.
        (c) The code used strcasecmp() which is not a standard C function.
            Replaced with Exim's strcmpic() function.
        (d) The code set only $1; it now sets $auth1 as well.
        (e) A simple test gave the error "authentication client didn't specify
            service in request". It would seem that Dovecot has changed its
            interface. Fortunately there's a specification; I followed it and
            changed what the client sends and it appears to be working now.
  PH/13 Added $message_headers_raw to provide the headers without RFC 2047
        decoding.
  PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
        address A is aliased to B and C, where B exists and C does not. Without
        -v the output is "A verified" because verification stops after a
        successful redirection if more than one address is generated. However,
        with -v the child addresses are also verified. Exim was outputting "A
        failed to verify" and then showing the successful verification for C,
        with its parentage. It now outputs "B failed to verify", showing B's
        parentage before showing the successful verification of C.
  PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
        look up a TXT record in a specific list after matching in a combined
        list.
  PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
        RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
        they consult the DNS. I had assumed they would set it the way they
        wanted; and indeed my experiments on Linux seem to show that in some
        cases they do (I could influence IPv6 lookups but not IPv4 lookups).
        To be on the safe side, however, I have now made the interface to
        host_find_byname() similar to host_find_bydns(), with an argument
        containing the DNS resolver options. The host_find_byname() function now
        sets these options at its start, just as host_find_bydns() does. The smtp
        transport options dns_qualify_single and dns_search_parents are passed to
        host_find_byname() when gethostbyname=TRUE in this transport. Other uses
        of host_find_byname() use the default settings of RES_DEFNAMES
        (qualify_single) but not RES_DNSRCH (search_parents).
  PH/17 Applied (a modified version of) Nico Erfurth's patch to make
        spool_read_header() do less string testing, by means of a preliminary
        switch on the second character of optional "-foo" lines. (This is
        overdue, caused by the large number of possibilities that now exist.
        Originally there were few.) While I was there, I also converted the
        str(n)cmp tests so they don't re-test the leading "-" and the first
        character, in the hope this might squeeze out yet more improvement.
  PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
        flag allowing group syntax was set by the header_syntax check but not
        turned off, possible causing trouble later; (2) The flag was not being
        set at all for the header_verify test, causing "group"-style headers to
        be rejected. I have now set it in this case, and also caused header_
        verify to ignore an empty address taken from a group. While doing this, I
        came across some other cases where the code for allowing group syntax
        while scanning a header line wasn't quite right (mostly, not resetting
        the flag correctly in the right place). These bugs could have caused
        trouble for malformed header lines. I hope it is now all correct.
  PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
        with the "reply" argument non-NULL. The code, however (which originally
        came from elsewhere) had *some* tests for NULL when it wrote to *reply,
        but it didn't always do it. This confused somebody who was copying the
        code for some other use. I have removed all the tests.
  PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
        feature that was used to support insecure browsers during the U.S. crypto
        embargo. It requires special client support, and Exim is probably the
        only MTA that supported it -- and would never use it because real RSA is
        always available. This code has been removed, because it had the bad
        effect of slowing Exim down by computing (never used) parameters for the
        RSA_EXPORT functionality.
  PH/21 On the advice of Timo Sirainen, added a check to the dovecot
        authenticator to fail if there's a tab character in the incoming data
        (there should never be unless someone is messing about, as it's supposed
        to be base64-encoded). Also added, on Timo's advice, the "secured" option
        if the connection is using TLS or if the remote IP is the same as the
        local IP, and the "valid-client-cert option" if a client certificate has
        been verified.
  PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
        authenticators. This can be used for authorization after authentication
        succeeds. (In the case of plaintext, it servers for both authentication
        and authorization.)
  PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
        if any retry times were supplied.
  PH/24 Exim crashed if verify=helo was activated during an incoming -bs
        connection, where there is no client IP address to check. In this
        situation, the verify now always succeeds.
  PH/25 Applied John Jetmore's -Mset patch.
  PH/26 Added -bem to be like -Mset, but loading a message from a file.
  PH/27 In a string expansion for a processed (not raw) header when multiple
        headers of the same name were present, leading whitespace was being
        removed from all of them, but trailing whitespace was being removed only
        from the last one. Now trailing whitespace is removed from each header
        before concatenation. Completely empty headers in a concatenation (as
        before) are ignored.
  PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
        Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
  PH/29 [Removed. This was a change that I later backed out, and forgot to
        correct the ChangeLog entry (that I had efficiently created) before
        committing the later change.]
  PH/30 Exim was sometimes attempting to deliver messages that had suffered
        address errors (4xx response to RCPT) over the same connection as other
        messages routed to the same hosts. Such deliveries are always "forced",
        so retry times are not inspected. This resulted in far too many retries
        for the affected addresses. The effect occurred only when there were more
        hosts than the hosts_max_try setting in the smtp transport when it had
        the 4xx errors. Those hosts that it had tried were not added to the list
        of hosts for which the message was waiting, so if all were tried, there
        was no problem. Two fixes have been applied:
        (i)  If there are any address or message errors in an SMTP delivery, none
             of the hosts (tried or untried) are now added to the list of hosts
             for which the message is waiting, so the message should not be a
             candidate for sending over the same connection that was used for a
             successful delivery of some other message. This seems entirely
             reasonable: after all the message is NOT "waiting for some host".
             This is so "obvious" that I'm not sure why it wasn't done
             previously. Hope I haven't missed anything, but it can't do any
             harm, as the worst effect is to miss an optimization.
        (ii) If, despite (i), such a delivery is accidentally attempted, the
             routing retry time is respected, so at least it doesn't keep
             hammering the server.
  PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
        in ${readsocket because some servers need this prod.
  PH/32 Added some extra debug output when updating a wait-xxx database.
  PH/33 The hint "could be header name not terminated by colon", which has been
        given for certain expansion errors for a long time, was not being given
        for the ${if def:h_colon_omitted{...  case.
  PH/34 The spec says: "With one important exception, whenever a domain list is
        being scanned, $domain contains the subject domain." There was at least
        one case where this was not true.
  PH/35 The error "getsockname() failed: connection reset by peer" was being
        written to the panic log as well as the main log, but it isn't really
        panic-worthy as it just means the connection died rather early on. I have
        removed the panic log writing for the ECONNRESET error when getsockname()
        fails.
  PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
        runs only) independently of the message's sender address. This meant
        that, if the 4xx error was in fact related to the sender, a different
        message to the same recipient with a different sender could confuse
        things. In particualar, this can happen when sending to a greylisting
        server, but other circumstances could also provoke similar problems.
        I have changed the default so that the retry time for these errors is now
        based a combination of the sender and recipient addresses. This change
        can be overridden by setting address_retry_include_sender=false in the
        smtp transport.
  PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
        remote server are returned as part of bounce messages. This was not
        happening for LMTP over a pipe (the lmtp transport), but now it is the
        same for both kinds of LMTP.
  PH/38 Despite being documented as not happening, Exim was rewriting addresses
        in header lines that were in fact CNAMEs. This is no longer the case.
  PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
        and queue runs started by the daemon processed all messages. This has
        been fixed so that -R and -S can now usefully be given with -q<time>.
  PH/40 Import PCRE release 6.7 (fixes some bugs).
  PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
  PH/42 Give an error if -q is specified more than once.
  PH/43 Renamed the variables $interface_address and $interface_port as
        $received_ip_address and $received_port, to make it clear that these
        values apply to message reception, and not to the outgoing interface when
        a message is delivered. (The old names remain recognized, of course.)
  PH/44 There was no timeout on the connect() call when using a Unix domain
        socket in the ${readsocket expansion. There now is.
  PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
        be meaningful with "accept".
  SC/01 Eximstats V1.43
       Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
  SC/02 Eximstats V1.44
        Use a glob alias rather than an array ref in the generated
        parser. This improves both readability and performance.
  SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
        Collect SpamAssassin and rejection statistics.
        Don't display local sender or destination tables unless
        there is data to show.
        Added average volumes into the top table text output.
  SC/04 Eximstats V1.46
        Collect data on the number of addresses (recipients)
        as well as the number of messages.
  SC/05 Eximstats V1.47
        Added 'Message too big' to the list of mail rejection
        reasons (thanks to Marco Gaiarin).
  SC/06 Eximstats V1.48
        Mainlog lines which have GMT offsets and are too short to
        have a flag are now skipped.
  SC/07 Eximstats V1.49 (Alain Williams)
        Added the -emptyok flag.
  SC/08 Eximstats V1.50
        Fixes for obtaining the IP address from reject messages.
  JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
        (added [br]h_ prefixes, implemented RFC2047 decoding.  Fixed
        whitesspace changes from 4.64-PH/27
  JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
        match 4.64-PH/13
  JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
        are found, allow negative numbers in numeric criteria)
  JJ/06 exipick.20061117.2, added new $message_body_missing variable
  JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
        to match changes made in 4.64-PH/43
  PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
  PH/47 Put in an explicit test for a DNS lookup of an address record where the
        "domain" is actually an IP address, and force a failure. This locks out
        those revolvers/nameservers that support "A-for-A" lookups, in
        contravention of the specifications.
  PH/48 When a host name was looked up from an IP address, and the subsequent
        forward lookup of the name timed out, the host name was left in
        $sender_host_name, contrary to the specification.
  PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
        restricted to single-key lookups, Exim was not diagnosing an error if
        * or *@ was used with a query-style lookup.
  PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
  MH/01 local_scan ABI version incremented to 1.1. It should have been updated
        long ago, but noone interested enough thought of it. Let's just say that
        the "1.1" means that there are some new functions that weren't there at
        some point in the past.
  PH/51 Error processing for expansion failure of helo_data from an smtp
        transport during callout processing was broken.
  PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
        tested/used via the -bh/-bhc/-bs options.
  PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
        bug, fixed in subsequent PCRE releases).
  PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
        arises when using the Solaris LDAP libraries (but not with OpenLDAP).
  PH/55 Check for a ridiculously long file name in exim_dbmbuild.
- build with AUTH_DOVECOT and LOOKUP_NIS

-------------------------------------------------------------------
Mon Oct 23 15:39:15 CEST 2006 - poeml@suse.de

- define SYSLOG_LOG_PID in src/EDITME, so the process id is
  included when logging via syslog. Pointed out by Florian Laws.

-------------------------------------------------------------------
Fri Oct 20 18:20:37 CEST 2006 - lmuelle@suse.de

- add sendmail to the Provides tag in the init script

-------------------------------------------------------------------
Fri Aug  4 15:14:35 CEST 2006 - poeml@suse.de

- add support for building with mysql lookup support, by defining 
  %build_with_mysql at the top of the spec file [#188586]
- don't use %name macro in %setup therefore (so another spec file
  can have a different Name tag)
- remove stray bzcat %{S:30} line

-------------------------------------------------------------------
Thu Aug  3 16:18:54 CEST 2006 - poeml@suse.de

- update to 4.63
  * Use a glob alias rather than an array ref in eximstats generated
    parser. This improves both readability and performance.
  * Collect SpamAssassin and rejection statistics in eximstats.
    Don't display local sender or destination tables in eximstats unless
    there is data to show.
    Added average volumes into the eximstats top table text output.
  * Collect data on the number of addresses (recipients) as well
    as the number of messages in eximstats.
  * Correct an error in the documentation for the redirect router. Exim
    does (usually) call initgroups() when daemonizing.
  * Call initgroups() when dropping privilege in exim.c, so that Exim runs
    with consistent privilege compared to when running as a daemon.
  * Note in the spec that $authenticated_id is not set for local
    submissions from trusted users.
  * The ratelimit per_rcpt option now works correctly in acl_not_smtp.
    Thanks to Dean Brooks <dean@iglou.com> for the patch.
  * Make it easier to get SMTP authentication and TLS/SSL support working
    by adding some example configuration directives to the default
    configuration file. A little bit of work is required to uncomment the
    directives and define how usernames and passwords are checked, but
    there is now a framework to start from.
  * Added #define LDAP_DEPRECATED 1 to ldap.c because some of the "old"
    functions that Exim currently uses aren't defined in ldap.h for OpenLDAP
    without this. I don't know how relevant this is to other LDAP libraries.
  * Add the verb name to the "unknown ACL verb" error.
  * Magnus Holmgren's patch for filter_prepend_home.
  * Fixed Bugzilla #101: macro definition between ACLs doesn't work.
  * Applied Magnus Holmgren's patch to fix Bugzilla #98: transport's home
    directory not expanded when it should be if an expanded home directory
    was set for the address (which is overridden by the transport).
  * Applied Alex Kiernan's patch to fix Bugzilla #99: a problem with
    libradius.
  * Added acl_not_smtp_start, based on Johannes Berg's patch, and set the
    bit to forbid control=suppress_local_fixups in the acl_not_smtp ACL,
    because it is too late at that time, and has no effect.
  * Changed ${quote_pgsql to quote ' as '' instead of \' because of a
    security issue with \' (bugzilla #107). I could not use the
    PQescapeStringConn() function, because it needs a PGconn value as one of
    its arguments.
  * When testing addresses using -bt, indicate those final addresses that
    are duplicates that would not cause an additional delivery. At least one
    person was confused, thinking that -bt output corresponded to deliveries.
    (Suppressing duplicates isn't a good idea as you lose the information
    about possibly different redirections that led to the duplicates.)
  * Applied patch from Erik to use select() instead of poll() in spam.c on
    systems where poll() doesn't work, in particular OS X.
  * Added more information to debugging output for retry time not reached.
  * Applied patch from Arkadiusz Miskiewicz to apply a timeout to read
    operations in malware.c.
  * Applied patch from Magnus Holmgren to include the "h" tag in Domain Keys
    signatures.
  * If write_rejectlog was set false when logging was sent to syslog with
    syslog_duplication set false, log lines that would normally be written
    both the the main log and to the reject log were not written to syslog at
    all.
  * In the default configuration, change the use of "message" in ACL warn
    statements to "add_header".
  * Diagnose a filter syntax error for "seen", "unseen", or "noerror" if not
    not followed by a command (e.g. "seen endif").
  * Recognize SMTP codes at the start of "message" in ACLs and after :fail:
    and :defer: in a redirect router. Add forbid_smtp_code to suppress the
    latter.
  * Added extra conditions to the default value of delay_warning_condition
    so that it is now:
      ${if or { \
          { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
          { match{$h_precedence:}{(?i)bulk|list|junk} } \
          { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
          }{no}{yes}}
    The Auto-Submitted: and various List- headers are standardised, whereas I
    don't think Precedence: ever was.
  * Refactored debugging code in route_finduser() to show more information,
    in particular, the error code if getpwnam() issues one.
  * Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
    This is apparently needed in addition to the     - change above to avoid
    any possible encoding problems.
  * Perl can change the locale. Exim was resetting it after a ${perl call,
    but not after initializing Perl.
  * Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
    output them only if debugging. By default they are written stderr,
    apparently, which is not desirable.
  * Added Alain Williams' LDAP patch to support setting REFERRALS=off on
    queries.
  * exipick: added --reverse (and -R synonym), --random, --size, --sort and
    --not options
  * exipick: rewrote --help documentation to hopefully make more clear.
  * Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
    authenticated or an ident call has been made. Suppress the default
    values for $authenticated_id and $authenticated_sender (but permit -oMai
    and -oMas) when testing with -bh.
  * Re-jigged the order of the tests in the default configuration so that the
    tests for valid domains and recipients precede the DNS black list and CSA
    tests, on the grounds that those ones are more expensive.
  * Exim was not testing for a space following SMTP commands such as EHLO
    that require one. Thus, EHLORHUBARB was interpreted as a valid command.
    This bug exists in every version of Exim that I still have, right back to
    0.12.
  * (n)wildlsearch lookups are documented as being done case-insensitively.
    However, an attempt to turn on case-sensitivity in a regex key by
    including (?-i) didn't work because the subject string was already
    lowercased, and the effects were non-intuitive. It turns out that a
    one-line patch can be used to allow (?-i) to work as expected.
- fix build requires for older SUSE distributions

-------------------------------------------------------------------
Tue May 30 16:07:30 CEST 2006 - poeml@suse.de

- upstream 4.62
  . The ${readsocket expansion item now supports Internet domain sockets as well
    as Unix domain sockets. 
  . If a redirect router sets up file or pipe deliveries for more than one
    incoming address, and the relevant transport has batch_max set greater than
    one, a batch delivery now occurs.
  . The appendfile transport has a new option called maildirfolder_create_regex.
  . An option called disable_ipv6, to disable the use of IPv6 completely.
  . An increase in the number of ACL variables to 20 of each type.
  . A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
    $2, $3, (though those are still set) because the numeric variables get used
    for other things in complicated expansions.
  . The default for rfc1413_query_timeout has been changed from 30s to 5s.
  . It is possible to use setclassresources() on some BSD OS to control the
    resources used in pipe deliveries.
  . A new ACL modifier called add_header, which can be used with any verb.
  . More errors are detectable in retry rules.
  . Support for SQLite.
  . Support for IGNOREQUOTA in LMTP.
  . Extensions to the "submission mode" features.
  . Support for Client SMTP Authorization (CSA).
  . Support for ratelimiting hosts and users.
  . New expansion items to help with the BATV "prvs" scheme.
  . A "match_ip" condition, that matches an IP address against a list.
  - numerous bug fixes and minor changes
- add eximstats-html subpackage, which, if installed and enabled in
  /etc/sysconfig/exim, puts HTML reports of the 'eximstats' log
  analyzer into /srv/www/eximstats
- try to adapt BuildRequires and suse specific rpm macros to build
  on Fedora Core

-------------------------------------------------------------------
Wed Mar  8 17:16:33 CET 2006 - poeml@suse.de

- build as non-root user

-------------------------------------------------------------------
Wed Jan 25 21:35:47 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Oct 25 14:34:09 CEST 2005 - rhafer@suse.de

- added LDAP_DEPRECATED to CFLAGS to build correctly with
  OpenLDAP 2.3

-------------------------------------------------------------------
Fri Sep  2 15:39:15 CEST 2005 - poeml@suse.de

- link against external pcre library (patch from Debian) [#112647]

-------------------------------------------------------------------
Sat Aug 13 10:56:12 CEST 2005 - ro@suse.de

- fix file list 

-------------------------------------------------------------------
Thu Aug 11 16:06:51 CEST 2005 - poeml@suse.de

- the permissions files are now maintained centrally and packaged
  in the permissions package [#66304]
- add run_permissions macro and verifyscript

-------------------------------------------------------------------
Fri Jul 29 10:43:47 CEST 2005 - poeml@suse.de

- remove world read/execute permissions from /var/log/exim, so log
  files are not readable regardless of how logrotate deals with
  them, or dealt with them in the past. Give group ownership to
  group mail, so exim still can chdir() after dropping permissions.
  [#99167]

-------------------------------------------------------------------
Tue Jun 21 00:46:39 CEST 2005 - ro@suse.de

- build with fPIE/pie 

-------------------------------------------------------------------
Wed May 18 17:35:49 CEST 2005 - poeml@suse.de

- update to 4.51
  This release contains some new features, but a lot of the changes
  fix bugs of varying severity. See doc/ChangeLog.

-------------------------------------------------------------------
Mon Feb 21 17:23:57 CET 2005 - poeml@suse.de

- update to 4.50.  This release includes the merging of the exiscan
  patch into the main source. Thus, compile with the new
  WITH_CONTENT_SCAN=yes and add WITH_OLD_DEMIME=yes for backwards
  compatibility (old demime condition)
- update filelist of documentation files

-------------------------------------------------------------------
Mon Jan 17 10:38:56 CET 2005 - poeml@suse.de

- update to 4.44
- update exiscan to 4.44-28

-------------------------------------------------------------------
Sat Jan 15 21:19:28 CET 2005 - schwab@suse.de

- Use <owner>:<group> in permissions file.

-------------------------------------------------------------------
Tue Jan 11 15:34:07 CET 2005 - poeml@suse.de

- security fixes:
  - CAN-2005-0021 host_aton() Buffer Overflow Vulnerability
    [#49675]
  - CAN-2005-0022 auth_spa_server() Buffer Overflow Vulnerability
    SPA support is not compiled in. Fix added nevertheless [#49676]

-------------------------------------------------------------------
Fri Dec 10 21:47:47 CET 2004 - poeml@suse.de

- update to 4.43
- update exiscan to 4.43-28

-------------------------------------------------------------------
Tue Sep 28 23:11:15 CEST 2004 - poeml@suse.de

- if a service named greylistd is started, start it before exim 

-------------------------------------------------------------------
Mon Sep  6 15:41:18 CEST 2004 - poeml@suse.de

- update to 4.42
- update exiscan to 4.42-27

-------------------------------------------------------------------
Mon May 10 23:32:42 CEST 2004 - poeml@suse.de

- update to 4.34
- update exiscan to 4.34-21

-------------------------------------------------------------------
Sun May  9 20:14:07 CEST 2004 - poeml@suse.de

- update to 4.33
- update exiscan to 4.33-20
- add patch against buffer overflow with header name when
  headers_check_syntax is enabled (CAN-2004-0400) [#40126]
  http://www.exim.org/pipermail/exim-users/Week-of-Mon-20040503/071126.html

-------------------------------------------------------------------
Tue Apr 27 20:43:27 CEST 2004 - poeml@suse.de

- update exiscan to 4.32-19 due to crash bug in -18 affecting the
  MIME ACL.

-------------------------------------------------------------------
Sun Apr 25 15:57:26 CEST 2004 - poeml@suse.de

- update to 4.32
- update exiscan to 4.32-18
- new file /usr/sbin/exipick

-------------------------------------------------------------------
Fri Mar 19 10:10:08 CET 2004 - mmj@suse.de

- Remove superflous backup files

-------------------------------------------------------------------
Wed Mar  3 19:31:08 CET 2004 - poeml@suse.de

- update exiscan to 4.30-16. Major new feature: the MIME ACL.

-------------------------------------------------------------------
Wed Feb 25 23:17:54 CET 2004 - poeml@suse.de

- update to 4.30
- update exiscan to 4.30-14
- compile with support for LDAP lookups 
- add openldap2-devel cyrus-sasl-devel to #neededforbuild
- compile with support for cdb, dnsdb, passwd lookups
- compile with support for mailstore and mbx mailboxes
- compile with -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 so large
  files can be handled

-------------------------------------------------------------------
Wed Feb  4 15:17:56 CET 2004 - mmj@suse.de

- Lower rfc1413_query_timeout to 5 seconds instead of 30

-------------------------------------------------------------------
Wed Nov 19 11:15:23 CET 2003 - poeml@suse.de

- fix comments in sysconfig.exim (Kevin Ivory) [#32575]

-------------------------------------------------------------------
Tue Nov 18 15:51:21 CET 2003 - poeml@suse.de

- logrotate configuration: removed postrotate reloading, since it's
  not needed; add missingok; make report mails configurable via
  sysconfig/exim (Kevin Ivory) [#32575]

-------------------------------------------------------------------
Mon Sep  8 12:00:40 CEST 2003 - poeml@suse.de

- exim.rc: delete <feedback@suse.de> address

-------------------------------------------------------------------
Tue Aug 26 14:52:29 CEST 2003 - poeml@suse.de

- don't remove empty log files in %preun, since it's actually run
  after %post in update mode [#29368]

-------------------------------------------------------------------
Mon Aug 18 17:40:23 CEST 2003 - poeml@suse.de

- update to 4.22, which fixes a few bugs in 4.21
- improve start section of init script. Don't start multiple
  processes; don't disrupt mail transfer

-------------------------------------------------------------------
Fri Aug 15 03:52:55 CEST 2003 - poeml@suse.de

- update to 4.21. many changes, see NewStuff and ChangeLog file!
  - prevent possible overflow in HELO/EHLO command by
    (a) rewrite of the offending code in a cleaner fashion.
    (b) If an incoming SMTP command contains a NULL character, it
        is rejected as invalid.
  - sieve support (rfc 3028)
  - support for saslauthd authentication
  - cramtest.pl utility updated
  - eximstats 1.28 (addition of -nt option)
  - If a DNS black list lookup found a CNAME record, but there were
    no A records associated with the domain it pointed at, Exim
    crashed.
  - add new Auto-Submitted header on e.g. bounces
  - new option syslog_duplication
  - more flexible way to specify listening addresses/ports
- use -Wall
- add -fno-strict-aliasing, due to warnings about code where
  dereferencing type-punned pointers will break strict aliasing
- add activation metadata to sysconfig template [#28874]
- add patch for IPv6 breakage until 4.22 is out
- don't use startproc to start exim. It can't distinguish the
  parent daemon from queue runners or other children [#28082]

-------------------------------------------------------------------
Wed Jul 30 16:51:00 CEST 2003 - poeml@suse.de

- new macros for stop/restart of services on rpm update/removal

-------------------------------------------------------------------
Wed May 21 09:19:13 CEST 2003 - coolo@suse.de

- avoid empty %pre
- avoid absolute symlinks below /usr

-------------------------------------------------------------------
Thu May 15 00:50:04 CEST 2003 - poeml@suse.de

- update to 4.20
  - bug fixes
  - upgraded to PCRE 4.2
  - upgraded eximstats to 1.27
  - added versioning to the local_scan() API
  - Added acl_smtp_helo
  - added the "discard" verb to ACLs.
  - for building, DESTDIR can be used now instead of ROOT 
  - behaviour of -t in the presence of Resent- headers has been
    changed for compatibility
  - added new syslog facilities:
    (i)  SYSLOG_LOGS_PID and LONG_SYSLOG_LINES in src/EDITME.
    (ii) syslog_facility and syslog_processname main options.
  - the documentation was brought up to date.
- update exiscan patch to exiscan-acl-4.20-02
- remove filelist hack from %clean, since now we have rpm4 :-)
- create logfiles from %post, not in the init script [#24262]

-------------------------------------------------------------------
Tue Apr 22 13:53:06 CEST 2003 - poeml@suse.de

- update to 4.14. As always, there are lots of minor fixes and
  cleanups. New features include MySQL lookups over Unix domain
  sockets, the ability to en/disable parts of the configuration
  file with ".if", new options for fine-tuning the behavior with
  respect to unknown SMTP commands, announcing of AUTH and
  pipelining, and lots of new expansion operators.
- remove the obsolete (3.x style) %s in pidfile name
- the eximstats utility contains an official manpage, so we can
  drop Andreas' version from the manpages tar ball
- add Tom Kistner's exiscan patch 
- include the exiqgrep script
- improve the logrotate configuration, so the eximstats report is
  sent upon rotation (weekly), and not every night. Sending the
  report can be disabled by touching /var/log/exim/no_report_mail.

-------------------------------------------------------------------
Thu Apr 10 00:37:27 CEST 2003 - ro@suse.de

- fix deprecated tail call syntax (-1) 

-------------------------------------------------------------------
Thu Feb 13 12:49:28 CET 2003 - lmuelle@suse.de

- fix typo in sysconfig metadata

-------------------------------------------------------------------
Wed Feb 12 15:12:33 CET 2003 - mmj@suse.de

- Add sysconfig metadata [#22641]

-------------------------------------------------------------------
Wed Dec 18 13:07:56 CET 2002 - poeml@suse.de

- update to 4.12 (more bug fixes: lookup search bug, too many
  non-mail commands bug, and others)
- package the installed exim.conf as configure.default, since it
  has all substitutions done (since 4.11, SYSTEM_ALIASES_FILE is
  replaced at install time)

-------------------------------------------------------------------
Wed Dec 11 12:51:39 CET 2002 - poeml@suse.de

- update to 4.11, with security and bug fixes. The more important
  changes are: 
  - [in short] Make exim cope with strace -f
  - Make sure Exim doesn't overrun the buffer if an oversize packet
    is received from a nameserver.
  - Exim crashed on an attempt to check senders or sender domains
    in an ACL other than after RCPT or DATA. It's now a temporary
    error.
  - Minor security problem involving pid_file_path (admin user
    could get root) has been fixed.
  - If an ACL that was read from a file was used in more than one
    message in a single SMTP transaction, Exim could crash or
    misbehave in arbitrary ways. [...]
  - A similar problem to 127: memory corruption could occur for
    multiple messages in one SMTP connection if the data from DNS
    black list lookups was being used in log or user messages, e.g.
    references to $dnslists_text.
  For the complete list of changes, see 
  ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/ChangeLogs/ 
- remove rmail symlink as it conflicts with rmail from the uucp
  package

-------------------------------------------------------------------
Mon Nov 11 15:31:46 CET 2002 - poeml@suse.de

- use #neededforbuild macro 'x-devel-packages' instead of xf86
- add man pages, provided by Andreas Metzler 
- add some symlinks that exim might be called under

-------------------------------------------------------------------
Tue Aug 13 20:07:30 CEST 2002 - poeml@suse.de

- remove stupid arch-dependant path from filelist

-------------------------------------------------------------------
Tue Aug 13 19:06:33 CEST 2002 - poeml@suse.de

- mv exim.conf to /etc/exim/
- add scripts for conversion of 3.xx config files
- add symbolic link "runq" (same as exim -q)
- use %defattr

-------------------------------------------------------------------
Mon Aug 12 16:17:18 CEST 2002 - poeml@suse.de

- improve logrotate configuration
- fix PreReq
- install exim.8 manpage and gzip the remaining documentation
- Moved log file creation from %post to rcexim

-------------------------------------------------------------------
Tue Aug  6 12:57:10 MEST 2002 - draht@suse.de

- added /etc/permissions.d/exim for setuid /usr/sbin/exim

-------------------------------------------------------------------
Fri Aug  2 21:55:31 CEST 2002 - poeml@suse.de

- package created (4.10)