LogoopenSUSE Build Service > Projects
Sign Up | Log In

View File rc.dhcpd6 of Package dhcp.219 (Project openSUSE:12.1:Update)

#! /bin/bash
# Copyright (c) 1996, 1997, 1998 S.u.S.E. GmbH
# Copyright (c) 1998, 1999, 2000, 2001 SuSE GmbH
# Copyright (c) 2002, 2003 SuSE Linux AG
# Copyright (c) 2004-2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
# Place, Suite 330, Boston, MA 02111-1307 USA
#
# Author: Rolf Haberrecker <rolf@suse.de>, 1997-1999
#         Peter Poeml <poeml@suse.de>, 2000-2006
#         Marius Tomaschewski <mt@suse.de>, 2006-2010
#
# /etc/init.d/dhcp-server
#   and its symbolic link
# /usr/sbin/rcdhcp-server
#
### BEGIN INIT INFO
# Provides:			dhcp6-server
# Required-Start:		$remote_fs $network 
# Should-Start:			network-remotefs $named $syslog $time ldap ndsd
# Required-Stop:		$remote_fs $network
# Should-Stop:			network-remotefs $named $syslog ldap ndsd
# Default-Start:		3 5
# Default-Stop:			0 1 2 6
# Short-Description:		ISC DHCP 4.x Server
# Description:			Start ISC DHCP (Dynamic Host Configuration Protocol)
#                               4.x series server.
#                               (Note: if configured for failover it
#				needs to rely on time synchronisation.)
### END INIT INFO

test -s /etc/sysconfig/dhcpd && . /etc/sysconfig/dhcpd

SUPPORTS_CHROOT="yes"
SUPPORTS_RUN_AS="yes"
SUPPORTS_HUP="no"

DHCPDv_OPT=-6
DHCPD_RUN_CHROOTED=$DHCPD6_RUN_CHROOTED
DHCPD_RUN_AS=$DHCPD6_RUN_AS
DHCPD_BINARY=$DHCPD6_BINARY
DHCPD_INTERFACE=$DHCPD6_INTERFACE
DHCPD_CONF_INCLUDE_FILES=${DHCPD6_CONF_INCLUDE_FILES:-/etc/dhcpd6.d}
DHCPD_OTHER_ARGS=$DHCPD6_OTHER_ARGS

test "$SUPPORTS_CHROOT" = no && DHCPD_RUN_CHROOTED=no
test "$SUPPORTS_RUN_AS" = no && DHCPD_RUN_AS=""

DAEMON='ISC DHCPv6 4.x Server'
DAEMON_BIN=${DHCPD_BINARY:=/usr/sbin/dhcpd6}
DAEMON_CONF=/etc/dhcpd6.conf
DAEMON_STATE=/var/lib/dhcp6
DAEMON_LEASES=dhcpd6.leases
# note: $DAEMON_PIDFILE is a symlink to the
#       $DAEMON_STATE$DAEMON_PIDFILE (also
#       while DHCPD_RUN_CHROOTED=no) now,
#       as DHCPD_RUN_AS is not allowed to
#       create pid files in /var/run.
DAEMON_PIDFILE=/var/run/dhcpd6.pid
STARTPROC_LOGFILE=/var/log/rc.dhcpd6.log
LDAP_CONF=

test "$DHCPD_RUN_CHROOTED" = "yes" && \
CHROOT_PREFIX="$DAEMON_STATE" || CHROOT_PREFIX=''

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num><num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
. /etc/rc.status

# First reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

if ! [ -x "$DAEMON_BIN" ]; then
	case $1 in
	stop)   ;;
	*)	echo -n >&2 "$0: \"$DAEMON_BIN\" is not an executable file. Exiting."
		case $1 in
		status) rc_failed 4 ;;
		*)	rc_failed 5 ;;
		esac
		rc_status -v
	;;
	esac
	rc_exit
fi
if ! [ -r "$DAEMON_CONF" ] ; then
	case $1 in
	stop|status)
		if test ! -s /etc/sysconfig/dhcpd ; then
			test -e $DAEMON_STATE/$DAEMON_PIDFILE && \
			CHROOT_PREFIX="$DAEMON_STATE" || CHROOT_PREFIX=''
		fi
	;;
	*)
		echo -n >&2 "$0: \"$DAEMON_CONF\" config file missed. Exiting."
		rc_failed 6
		rc_status -v
		rc_exit
	;;
	esac
fi

# remove empty pid files to avoid disturbing warnings by checkproc/killproc
# (these can occur if dhcpd does not start correctly)
test -e $DAEMON_PIDFILE && ! test -s $DAEMON_PIDFILE && rm $DAEMON_PIDFILE
test -e $DAEMON_STATE/$DAEMON_PIDFILE && ! test -s $DAEMON_STATE/$DAEMON_PIDFILE && rm $DAEMON_STATE/$DAEMON_PIDFILE

case "$1" in
    start)
	echo -n "Starting $DAEMON "

        ## If there is no conf file, skip starting of dhcpd
        ## and return with "program not configured"
	if ! [ -f $DAEMON_CONF ]; then
		echo -n "... no configuration file found";
		# Tell the user this has skipped
		rc_status -s
		# service is not configured
		exit 6;
	fi

        ## If the interfaces are not set, skip starting of dhcpd
        ## and return with "program not configured"
	if [ -z "$DHCPD_INTERFACE" ]; then
		var="DHCPD_INTERFACE"
		case $DHCPDv_OPT in -6) var=DHCPD6_INTERFACE ;; esac
		echo -n "... set $var in /etc/sysconfig/dhcpd"
		# Tell the user this has skipped
		rc_status -s
		# service is not configured
		exit 6;
	fi
	
	if [ "$DHCPD_INTERFACE" = "ANY" ]; then
		DHCPD_INTERFACE=""
	fi

	jail=${CHROOT_PREFIX:-${DAEMON_STATE}}; leases=$DAEMON_LEASES
	if ! [ -e $jail/db/$leases ]; then
		# until 9.0, the lease file was in /var/lib/dhcp and part of the package
		if test -e $jail/$leases -a '!' -L $jail/$leases; then
			# this is the case where the %post script runs _before_ the old package is 
			# removed (i.e., dhcpd.leases has not renamed to .rpmsave yet)
			mv $jail/$leases $jail/db/$leases && \
			ln -s db/$leases $jail/
		elif test -e $jail/$leases.rpmsave; then
			# this is what's left when the package is already gone.
			mv $jail/$leases.rpmsave $jail/db/$leases && \
			ln -s db/$leases $jail/
		else
			# fresh installation:
			# a lease file must be present. the server won't start without
			touch $jail/db/$leases
		fi
	fi

	if test "$DHCPD_RUN_CHROOTED" = "yes" ; then 
		## copy the conf file to the chroot jail (dhcpd has to be restarted anyway, 
		## when it has changed) and change path to leases file
		for i in $DAEMON_CONF $DHCPD_CONF_INCLUDE_FILES $LDAP_CONF /etc /dev; do
			if test -d "${i}" ; then
				test -d "$CHROOT_PREFIX/${i}" || \
				mkdir -p "$CHROOT_PREFIX/${i}"
			elif test -e "${i}" ; then
				test -d "$CHROOT_PREFIX/${i%/*}" || \
				mkdir -p "$CHROOT_PREFIX/${i%/*}"
			fi
		done
		rm -f $CHROOT_PREFIX/dev/urandom
		for i in $DAEMON_CONF $DHCPD_CONF_INCLUDE_FILES $LDAP_CONF /etc/{gai.conf,nsswitch.conf,resolv.conf,host.conf,hosts,localtime} /dev/urandom; do
			if ! test -e "$i"; then continue; fi # neither of them is absolutely necessary
			cp -aL "$i" "${CHROOT_PREFIX}/${i%/*}/" &>/dev/null \
				|| { echo "...$0:$LINENO: could not copy $i to chroot jail"; rc_failed; rc_status -v1; exit 6; }
		done
		libdir=$(basename $(echo ${CHROOT_PREFIX}/lib*))
		if test -x /usr/bin/ldd ; then
			get_ldd_deps()
			{
				ldd_wl="\/${libdir}\/lib"
				ldd_bl="\/${libdir}\/libc\."
				/usr/bin/ldd "$1" | \
				while read -sr a b c d ; do
					[ -n "$c" ] || continue
					[[ $c =~ $ldd_wl ]] || continue
					[[ $c =~ $ldd_bl ]] && continue
					echo $c
				done
			}
		else
			get_ldd_deps() { :; }
		fi
		cplibs=`for i in /$libdir/{libresolv.so.*,libnss_*.so.*} \
			         /$libdir/{libpthread.so.0,libdl.so.2} ;
			do
				if [ -s "$i" ] ; then
					echo "$i"
					get_ldd_deps "$i"
				fi
			done | sort -u`
		for i in $cplibs ; do
			if [ -s "$i" ]; then
				cp -pL "$i" "${CHROOT_PREFIX}/$libdir/" \
				|| { echo "...$0:$LINENO: could not copy $i to chroot jail"; rc_failed; rc_status -v1; exit 6; }
			fi
		done

		# mount /proc into the chroot; the server fails if unable to read /proc/net/{dev,if_inet6}
		mkdir -p ${CHROOT_PREFIX}/proc
		mount -t proc -o ro proc ${CHROOT_PREFIX}/proc 2>/dev/null

		DHCPD_ARGS="-chroot $CHROOT_PREFIX -lf /db/$DAEMON_LEASES"

		## If there is a pid file containing a pid, the machine might have crashed. pid files in
		## /var/run are always cleaned up at boot time, but this is not the case for the pid file in 
		## the chroot jail. Therefore, and old pid file may exist. This is only a problem if it 
		## incidentally contains the pid of a running process. If this process is not a 'dhcpd', 
		## we remove the pid. (dhcpd itself only checks whether the pid is alive or not.)
		if test -s $DAEMON_STATE/$DAEMON_PIDFILE; then
			p=$(<$DAEMON_STATE/$DAEMON_PIDFILE)
			if test -n "$p" && grep -qsE "^${DAEMON_BIN}" "/proc/$p/cmdline" ; then
				echo -n '(already running) '
			else
				rm -f $DAEMON_STATE/$DAEMON_PIDFILE
			fi
		fi
		PID_FILE_ARG="$DAEMON_PIDFILE"
	else
		DHCPD_ARGS="-lf ${DAEMON_STATE}/db/$DAEMON_LEASES"
		PID_FILE_ARG="$DAEMON_STATE$DAEMON_PIDFILE"
	fi

	if [ -n "$DHCPD_RUN_AS" ]; then
		DHCPD_RUN_AS_GROUP="$(getent group $(getent passwd $DHCPD_RUN_AS | cut -d: -f4) | cut -d: -f1)"
		DHCPD_ARGS="$DHCPD_ARGS -user $DHCPD_RUN_AS -group $DHCPD_RUN_AS_GROUP"

		chown	"${DHCPD_RUN_AS}:${DHCPD_RUN_AS_GROUP}" \
			"$DAEMON_STATE/${DAEMON_PIDFILE%/*}"
	fi


	## check syntax with -t (output to log file) and start only when the syntax is okay
	rm -f $STARTPROC_LOGFILE # start log
	error=0
	if ! $DAEMON_BIN $DHCPDv_OPT -t -cf $CHROOT_PREFIX/$DAEMON_CONF -pf $PID_FILE_ARG > $STARTPROC_LOGFILE 2>&1 ; then
		error=1
	else
		## Start daemon. If this fails the return value is set appropriate.
		## The init script should return 0, even if service is already running, 
		## to match the LSB spec.

		test "$2" = "-v" && echo -en \
			"\nexecuting '$DAEMON_BIN $DHCPDv_OPT -cf $DAEMON_CONF -pf $PID_FILE_ARG $DHCPD_ARGS $DHCPD_OTHER_ARGS $DHCPD_INTERFACE'"

		$DAEMON_BIN $DHCPDv_OPT -cf $DAEMON_CONF -pf $PID_FILE_ARG $DHCPD_ARGS $DHCPD_OTHER_ARGS $DHCPD_INTERFACE &> $STARTPROC_LOGFILE
		ret=$?
	fi	

	if [ $error -gt 0 -o ${ret:-0} -gt 0 ]; then
		## be verbose
		echo ""
		echo -n "  please see $STARTPROC_LOGFILE for details "
		## set status to failed
		rc_failed
	else
		ln -sf "$DAEMON_STATE$DAEMON_PIDFILE" "$DAEMON_PIDFILE"
		[ "$DHCPD_RUN_CHROOTED" = "yes" ] && echo -n "[chroot]" || :
	fi

	# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down $DAEMON "

	# Catch the case where daemon is running without chroot,
	# but sysconfig/dhcp has been changed to use chroot (and
	# another way around).
	# In this case is there is no $chroot/$pidfile, but there
	# should be a /pidfile that we use instead.
	# We can not kill without pid file or dhcp4 kills dhcp6.
	PID_FILE="$DAEMON_STATE$DAEMON_PIDFILE"
	if test "$DHCPD_RUN_CHROOTED" = "yes" ; then
		if test ! -s "$DAEMON_STATE$DAEMON_PIDFILE" -a \
		          -s "$DAEMON_PIDFILE" ; then
			PID_FILE="$DAEMON_PIDFILE"
		fi
	else
		if test ! -s "$DAEMON_PIDFILE" -a \
		          -s "$DAEMON_STATE$DAEMON_PIDFILE" ; then
			PID_FILE="$DAEMON_STATE$DAEMON_PIDFILE"
		fi
	fi

	## Stop daemon with killproc(8) and if this fails
	## set echo the echo return value.
	killproc -p "$PID_FILE" $DAEMON_BIN
	ret=$?

	# umount proc and remove libraries from the chroot jail,
	# so they are not left over if the server is deinstalled
	if [ "$DHCPD_RUN_CHROOTED" = yes -a -n "$CHROOT_PREFIX" ]; then
		umount ${CHROOT_PREFIX}/proc 2>/dev/null
		rm -f $CHROOT_PREFIX/lib*/*
	fi

	# Remember status and be verbose
	rc_failed $ret
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is now part of LSB (as of 1.9).
	## RH has a similar command named condrestart.
	$0 status
	if test $? = 0; then
		$0 restart
	else
		rc_reset        # Not running is not a failure.
	fi
	# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	sleep 3
	$0 start

	# Remember status and be quiet
	rc_status
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart.

	echo -n "Reload service $DAEMON"

	if [ "$SUPPORTS_HUP" = "yes" ]; then 
		killproc -p $DAEMON_STATE/$DAEMON_PIDFILE -HUP $DAEMON_BIN
		#touch $DAEMON_STATE/$DAEMON_PIDFILE
		rc_status -v
	else
		$0 stop  &&  sleep 3  &&  $0 start
		rc_status 
	fi
	;;
    reload)
	## Like force-reload, but if daemon does not support
	## signalling, do nothing (!)

	echo -n "Reload service $DAEMON"
	if [ "$SUPPORTS_HUP" = "yes" ]; then
		# If it supports signalling:
		killproc -p $DAEMON_STATE/$DAEMON_PIDFILE -HUP $DAEMON_BIN
		#touch $DAEMON_STATE/$DAEMON_PIDFILE
		rc_status -v
	else
		## Otherwise if it does not support reload:
		rc_failed 3
		rc_status -v
	fi
	;;
    status)
	echo -n "Checking for $DAEMON: "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

	# Status has a slightly different for the status command:
	# 0 - service running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running

	# NOTE: checkproc returns LSB compliant status values.
	checkproc -p $DAEMON_STATE/$DAEMON_PIDFILE $DAEMON_BIN
	rc_status -v
	;;
    probe)
	## Optional: Probe for the necessity of a reload,
	## give out the argument which is required for a reload.

	rc=0
	for i in /etc/sysconfig/dhcpd $DAEMON_CONF $DHCPD_CONF_INCLUDE_FILES; do
		test $i -nt $DAEMON_STATE/$DAEMON_PIDFILE && rc=1
	done
	test $rc = 1 && echo restart
	;;
    check-syntax|syntax-check)
	echo "Checking syntax of $DAEMON_CONF: "

	## this nice bit is from Edwin Groothuis:
	## check syntax (quiet)
	$DAEMON_BIN $DHCPDv_OPT -q -t -cf $DAEMON_CONF
	if ! [ $? -eq 0 ]; then 
		## check syntax (verbose)
		$DAEMON_BIN $DHCPDv_OPT -t -cf $DAEMON_CONF
		echo -e '\nConfig is NOT okay\n'
	else
		echo 'Config is okay. Hope you also specified existent network devices ;) '

		## in v3, lease file checking is also implemented
		if [ $DAEMON_BIN != "/usr/sbin/dhcpd-2" ]; then
			## check leases file (quiet)
			$DAEMON_BIN $DHCPDv_OPT -q -T -cf $DAEMON_CONF -lf ${DAEMON_STATE}/db/$DAEMON_LEASES
			if ! [ $? -eq 0 ]; then
				## check leases file (verbose)
				$DAEMON_BIN $DHCPDv_OPT -T -cf $DAEMON_CONF -lf ${DAEMON_STATE}/db/$DAEMON_LEASES
				echo -e '\nLease file is NOT okay'
			else
				echo 'Lease file is okay'
			fi
		fi
	fi
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe|check-syntax} [-v]"
	exit 1
esac
rc_exit