File shadow-login_defs-unused-by-pam.patch of Package shadow.12081
Remove variables that are present in login.defs, but shadow with the
current configuration (e. g. with PAM) does not use them.
shadow-login_defs-unused-check.sh makes possible to verify that it is
still up to date.
Index: etc/login.defs
===================================================================
--- etc/login.defs.orig
+++ etc/login.defs
@@ -12,11 +12,6 @@
FAIL_DELAY 3
#
-# Enable logging and display of /var/log/faillog login(1) failure info.
-#
-FAILLOG_ENAB yes
-
-#
# Enable display of unknown usernames when login(1) failures are recorded.
#
LOG_UNKFAIL_ENAB no
@@ -27,34 +22,6 @@ LOG_UNKFAIL_ENAB no
LOG_OK_LOGINS no
#
-# Enable logging and display of /var/log/lastlog login(1) time info.
-#
-LASTLOG_ENAB yes
-
-#
-# Enable checking and display of mailbox status upon login.
-#
-# Disable if the shell startup files already check for mail
-# ("mailx -e" or equivalent).
-#
-MAIL_CHECK_ENAB yes
-
-#
-# Enable additional checks upon password changes.
-#
-OBSCURE_CHECKS_ENAB yes
-
-#
-# Enable checking of time restrictions specified in /etc/porttime.
-#
-PORTTIME_CHECKS_ENAB yes
-
-#
-# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field.
-#
-QUOTAS_ENAB yes
-
-#
# Enable "syslog" logging of su(1) activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1).
#
@@ -82,46 +49,12 @@ MOTD_FILE /etc/motd
#MOTD_FILE /etc/motd:/usr/lib/news/news-motd
#
-# If defined, this file will be output before each login(1) prompt.
-#
-#ISSUE_FILE /etc/issue
-
-#
# If defined, file which maps tty line to TERM environment parameter.
# Each line of the file is in a format similar to "vt100 tty01".
#
#TTYTYPE_FILE /etc/ttytype
#
-# If defined, login(1) failures will be logged here in a utmp format.
-# last(1), when invoked as lastb(1), will read /var/log/btmp, so...
-#
-FTMP_FILE /var/log/btmp
-
-#
-# If defined, name of file whose presence will inhibit non-root
-# logins. The content of this file should be a message indicating
-# why logins are inhibited.
-#
-NOLOGINS_FILE /etc/nologin
-
-#
-# If defined, the command name to display when running "su -". For
-# example, if this is defined as "su" then ps(1) will display the
-# command as "-su". If not defined, then ps(1) will display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME su
-
-#
-# *REQUIRED*
-# Directory where mailboxes reside, _or_ name of file, relative to the
-# home directory. If you _do_ define both, MAIL_DIR takes precedence.
-#
-MAIL_DIR /var/spool/mail
-#MAIL_FILE .mail
-
-#
# If defined, file which inhibits all the usual chatter during the login
# sequence. If a full pathname, then hushed mode will be enabled if the
# user's name or shell are found in the file. If not a full pathname, then
@@ -131,21 +64,6 @@ HUSHLOGIN_FILE .hushlogin
#HUSHLOGIN_FILE /etc/hushlogins
#
-# If defined, either a TZ environment parameter spec or the
-# fully-rooted pathname of a file containing such a spec.
-#
-#ENV_TZ TZ=CST6CDT
-#ENV_TZ /etc/tzname
-
-#
-# If defined, an HZ environment parameter spec.
-#
-# for Linux/x86
-ENV_HZ HZ=100
-# For Linux/Alpha...
-#ENV_HZ HZ=1024
-
-#
# *REQUIRED* The default PATH settings, for superuser and normal users.
#
# (they are minimal, add the rest in the shell startup files)
@@ -171,17 +89,13 @@ TTYPERM 0600
#
# ERASECHAR Terminal ERASE character ('\010' = backspace).
# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
-# ULIMIT Default "ulimit" value.
#
# The ERASECHAR and KILLCHAR are used only on System V machines.
-# The ULIMIT is used only if the system supports it.
-# (now it works with setrlimit too; ulimit is in 512-byte units)
#
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
#
ERASECHAR 0177
KILLCHAR 025
-#ULIMIT 2097152
# Default initial "umask" value used by login(1) on non-PAM enabled systems.
# Default "umask" value for pam_umask(8) on PAM enabled systems.
@@ -197,28 +111,13 @@ UMASK 022
#
# PASS_MAX_DAYS Maximum number of days a password may be used.
# PASS_MIN_DAYS Minimum number of days allowed between password changes.
-# PASS_MIN_LEN Minimum acceptable password length.
# PASS_WARN_AGE Number of days warning given before a password expires.
#
PASS_MAX_DAYS 99999
PASS_MIN_DAYS 0
-PASS_MIN_LEN 5
PASS_WARN_AGE 7
#
-# If "yes", the user must be listed as a member of the first gid 0 group
-# in /etc/group (called "root" on most Linux systems) to be able to "su"
-# to uid 0 accounts. If the group doesn't exist or is empty, no one
-# will be able to "su" to uid 0.
-#
-SU_WHEEL_ONLY no
-
-#
-# If compiled with cracklib support, sets the path to the dictionaries
-#
-CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict
-
-#
# Min/max values for automatic uid selection in useradd(8)
#
UID_MIN 1000
@@ -255,28 +154,6 @@ LOGIN_RETRIES 5
LOGIN_TIMEOUT 60
#
-# Maximum number of attempts to change password if rejected (too easy)
-#
-PASS_CHANGE_TRIES 5
-
-#
-# Warn about weak passwords (but still allow them) if you are root.
-#
-PASS_ALWAYS_WARN yes
-
-#
-# Number of significant characters in the password for crypt().
-# Default is 8, don't change unless your crypt() is better.
-# Ignored if MD5_CRYPT_ENAB set to "yes".
-#
-#PASS_MAX_LEN 8
-
-#
-# Require password before chfn(1)/chsh(1) can make any changes.
-#
-CHFN_AUTH yes
-
-#
# Which fields may be changed by regular users using chfn(1) - use
# any combination of letters "frwh" (full name, room number, work
# phone, home phone). If not defined, no changes are allowed.
@@ -285,13 +162,6 @@ CHFN_AUTH yes
CHFN_RESTRICT rwh
#
-# Password prompt (%s will be replaced by user name).
-#
-# XXX - it doesn't work correctly yet, for now leave it commented out
-# to use the default which is just "Password: ".
-#LOGIN_STRING "%s's Password: "
-
-#
# Only works if compiled with MD5_CRYPT defined:
# If set to "yes", new passwords will be encrypted using the MD5-based
# algorithm compatible with the one used by recent releases of FreeBSD.
@@ -336,29 +206,12 @@ CHFN_RESTRICT rwh
# SHA_CRYPT_MAX_ROUNDS 5000
#
-# List of groups to add to the user's supplementary group set
-# when logging in from the console (as determined by the CONSOLE
-# setting). Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in from the console.
-# How to do it is left as an exercise for the reader...
-#
-#CONSOLE_GROUPS floppy:audio:cdrom
-
-#
# Should login be allowed if we can't cd to the home directory?
# Default is no.
#
DEFAULT_HOME yes
#
-# If this file exists and is readable, login environment will be
-# read from it. Every line should be in the form name=value.
-#
-ENVIRON_FILE /etc/environment
-
-#
# If defined, this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
