File openblas.changes of Package openblas
-------------------------------------------------------------------
Fri Dec 7 12:29:27 UTC 2018 - Ismail Dönmez <idonmez@suse.com>
- Update to version 0.3.4
common:
* The new, experimental thread-local memory allocation had
inadvertently been left enabled for gmake builds in 0.3.3
despite the announcement. It is now disabled by default,
and single-threaded builds will keep using the old
allocator even if the USE_TLS option is turned on.
* OpenBLAS will now provide enough buffer space for at least
50 threads by default.
* The output of openblas_get_config() now contains the version
number.
* A serious thread safety bug in GEMV operation with small M and
large N size has been fixed.
* The code will now automatically call blas_thread_init after
a fork if needed before handling a call to
openblas_set_num_threads
* Accesses to parallelized level3 functions from multiple
callers are now serialized to avoid thread races
(unless using OpenMP).
* This should provide better performance than the
known-threadsafe (but non-default)
USE_SIMPLE_THREADED_LEVEL3 option.
* When building LAPACK with gfortran, -frecursive is now
(again) enabled by default to ensure correct behaviour.
* The OpenBLAS version cblas.h now supports both CBLAS_ORDER
and CBLAS_LAYOUT as the name of the matrix row/column order
option.
* Externally set LDFLAGS are now passed through to the final
compile/link
* steps to facilitate setting platform-specific linker flags.
* A potential race condition during the build of LAPACK
(that would usually manifest itself as a failure to build
TESTING/MATGEN) has been fixed.
* xHEMV has been changed to stay single-threaded for small
input sizes where the overhead of multithreading exceeds
any possible gains
* CSWAP and ZSWAP have been limited to a single thread
except on ARMV8 or ThunderX hardware with sizable input.
* Linker flags for the PGI compiler have been updated
* Behaviour of AXPY with zero increments is now handled
in the C interface, correcting the result on at least
Intel Atom.
* The result matrix from calling SGELSS with an all-zero
input matrix is now zeroed completely.
x86_64:
* Autodetection of AMD Ryzen2 has been fixed (again).
* CMAKE builds now support labeling of an INTERFACE64=1
build of the library with the _64 suffix.
* AVX512 version of DGEMM has been added and the
AVX512 SGEMM kernel has been sped up by rewriting
with C intrinsics
* Fixed compilation on RHEL5/CENTOS5
(issue with typename __WAIT_STATUS)
armv8:
* DYNAMic_ARCH support is now available for 64bit ARM
* cross-compiling for ARMV8 under iOS now works.
* cpu-specific code has been rearranged to make better
use of both hardware commonalities and model-specific
compiler optimizations.
* XGENE1 has been removed as a TARGET, superseded by the
improved generic ARMV8 support.
armv7:
* Older assembly mnemonics have been converted to UAL
form to allow building with clang 7.0
-------------------------------------------------------------------
Tue Oct 9 19:00:49 UTC 2018 - Dmitry Roshchin <dmitry_r@opensuse.org>
- Update to version 0.3.3
common:
* thread memory allocation has been switched back to the method
used before version 0.3.1 due to unexpected problems caused by
the new code under some circumstances.
* LAPACK PR272 has been integrated, which fixes spurious errors
in DSYEVR and related functions caused by missing conversion
from ILAENV to ILAENV_2STAGE in several _2stage routines.
x86_64
* added AVX512 implementations of SDOT, DDOT, SAXPY, DAXPY,
DSCAL, DGEMVN and DSYMVL
* added a workaround for a cygwin issue that prevented compilation
of AVX512 code
-------------------------------------------------------------------
Fri Aug 17 12:56:04 UTC 2018 - idonmez@suse.com
- Update to version 0.3.2
common:
* Fixes for regressions caused by the rewrite of the thread
initialization code in 0.3.1
x86_64:
* Added autodetection of AMD Ryzen 2
* Fixed build with older versions of MSVC
power:
* Fixed cpu autodetection for the BSDs
mips64:
* Fixed utest errors in AXPY, DSDOT, ROT and SWAP
- Version 0.3.1
common:
* Rewritten thread initialization code with significantly
reduced overhead
* Added CBLAS interfaces to the IxAMIN BLAS extension functions
* Fixed the lapack-test target
* CMAKE builds now create an OpenBLASConfig.cmake file
* ZAXPY now uses a single thread for small input sizes
* The LAPACK code was updated from Reference-LAPACK/lapack#253
power:
* Corrected CROT and ZROT behaviour with zero INC_X
armv7:
* Corrected xDOT behaviour with zero INC_X or INC_Y
x86_64:
* Retired some older targets of DYNAMIC_ARCH builds to a
new option DYNAMIC_OLDER, this affects PENRYN,DUNNINGTON,
OPTERON,OPTERON_SSE3,BOBCAT,ATOM and NANO (which will still
be supported via the slower PRESCOTT kernels when this option
is not set)
* Added an option DYNAMIC_LIST that (used in conjunction with
DYNAMIC_ARCH) allows to specify the list of x86_64 targets to
include. Any target not on the list will be supported by
the Sandybridge or Nehalem kernels if available, or by Prescott.
* Improved SWITCH_RATIO on Haswell for increased GEMM throughput
* Added initial support for Intel Skylake X, including an AVX512
SGEMM kernel
* Added autodetection of Intel Cannon Lake series as Skylake X
* Added a default L2 cache size for hypervisors that return zero
here (Chromebook)
* Fixed a name clash with recent Windows10 headers that broke the
build with (at least) recent mingw from MSYS2
* Fixed a link error in mixed clang/gfortran builds with OpenMP
* Updated the OSX deployment target to 10.8
* Switched on parallel make for builds on MS Windows by default
x86:
* Fixed SSWAP and DSWAP behaviour with zero INC_X and INC_Y
- Version 0.3.0
common:
* Fixed some more thread race and locking bugs
* Added preliminary support for calling an OpenMP build of the
library from multiple threads
* Removed performance impact of thread locks added in 0.2.20
on OpenMP code
* General code cleanup
* Optimized DSDOT implementation
* Improved thread distribution for GEMM
* Corrected IMATCOPY/OMATCOPY implementation
* Fixed out-of-bounds accesses in the multithreaded xBMV/xPMV
and SYMV implementations
* Cmake build improvements
* pkgconfig file now contains build options
* openblas_get_config() now reports USE_OPENMP and NUM_THREADS
settings used for the build
* Corrections and improvements for systems with more than 64 cpus
* LAPACK code updated to 3.8.0 including later fixes
* Added ReLAPACK, a recursive implementation of several LAPACK functions
* Rewrote ROTMG to handle cases that the netlib code failed to address
* Disabled (broken) multithreading code for xTRMV
* corrected prototypes of complex CBLAS functions to make our
cblas.h match the generally accepted standard
* Shared memory access failures on startup are now handled more gracefully
* Restored utests from earlier releases (and made them pass on all
affected systems)
sparc:
* several fixes for cpu autodetection
arm:
* Added support for CortexA53 and A72
* Added autodetection for ThunderX2T99
* Made most optimized kernels the default for generic ARMv8 targets
x86_64:
* Parallelized DDOT kernel for Haswell
* Changed alignment directives in assembly kernels to boost performance on OSX
* Fixed register handling in the GEMV microkernels (bug exposed by gcc7)
* Added support for building on OpenBSD and Dragonfly
* Updated compiler options to work with Intel release 2018
* Support fully optimized build with clang/flang on Microsoft Windows
* Fixed building on AIX
ibm z:
* added optimized BLAS 1/2 functions
mips:
* Fixed cpu autodetection helper code
* Added mips32 1004K cpu (Mediatek MT7621 and similar SoC)
* Added mips64 I6500 cpu
- Remove c_xerbla_no-void-return.patch: fixed upstream.
-------------------------------------------------------------------
Tue Jan 30 18:19:33 CET 2018 - ro@suse.de
- add openblas-s390.patch to build on s390 (bsc#1079513).
-------------------------------------------------------------------
Fri Jan 5 18:27:17 UTC 2018 - eich@suse.com
- Switch from gcc6 to gcc7 as additional compiler flavor for HPC on SLES.
- Fix library package requires - use HPC macro (boo#1074890).
- Fix unexpanded rpm macro in environment module file for HPC (boo#1074897).
-------------------------------------------------------------------
Mon Nov 27 11:55:04 UTC 2017 - normand@linux.vnet.ibm.com
- Add -mvsx option for ppc64 archi (not required for ppc64le)
to avoid ./kernel/power/sasum_microk_power8.c:41:3: error:
'__vector' undeclared (first use in this function); ...
-------------------------------------------------------------------
Tue Oct 17 13:38:47 UTC 2017 - eich@suse.com
- Add magic to limit the number of flavors built in the
OBS to non-HPC ones.
-------------------------------------------------------------------
Thu Oct 12 10:01:10 UTC 2017 - eich@suse.com
- Generate baselib.conf dynamically and only for the non-HPC
builds: this avoids issues with the source validator.
-------------------------------------------------------------------
Fri Sep 8 14:30:29 UTC 2017 - eich@suse.com
- Convert openblas to multibuild.
- Add HPC build using environment modules.
(FATE#321708).
- fix-arm64-cpuid-return.patch
Fix CPUID detection on ARM (From OHPC).
-------------------------------------------------------------------
Wed Aug 9 19:45:54 UTC 2017 - dmitry_r@opensuse.org
- Remove migration %post scripts for old library names
-------------------------------------------------------------------
Sat Jul 29 16:08:38 UTC 2017 - badshah400@gmail.com
- Update to version 0.2.20:
* common:
- Improved CMake support
- Fixed several thread race and locking bugs
- Fixed default LAPACK optimization level
- Updated LAPACK to 3.7.0
- Added ReLAPACK (https://github.com/HPAC/ReLAPACK), make
BUILD_RELAPACK=1
* POWER:
- Optimizations for Power9
- Fixed several Power8 assembly bugs
* ARM:
- New optimized Vulcan and ThunderX2T99 targets
- Support for ARMV7 SOFT_FP ABI (make ARM_SOFTFP_ABI=1)
- Detect all cpu cores including offline ones
- Fix compilation with CLANG
- Support building a shared library for Android
* MIPS:
- Fixed several threading issues
- Fix compilation with CLANG
* x86_64:
- Detect Intel Bay Trail and Apollo Lake
- Detect Intel Sky Lake and Kaby Lake
- Detect Intel Knights Landing
- Detect AMD A8, A10, A12 and Ryzen
- Support 64bit builds with Visual Studio
- Fix building with Intel and PGI compilers
- Fix building with MINGW and TDM-GCC
- Fix cmake builds for Haswell and related cpus
- Fix building for Sandybridge with CLANG 3.9
- Add support for the FLANG compiler
* IBM Z:
- New target z13 with BLAS3 optimizations
- Drop 0001-Fix-power8-asm.patch; fixed upstream.
- Minor rebase of c_xerbla_no-void-return.patch and
openblas-noexecstack.patch for updated version.
- Remove installed pkgconfig file as it is not adapted to the
library names we use.
-------------------------------------------------------------------
Thu May 18 09:33:23 UTC 2017 - meissner@suse.com
- 0001-Fix-power8-asm.patch: fixed power8 assembly (bsc#1039397)
-------------------------------------------------------------------
Wed Sep 7 15:58:36 UTC 2016 - idonmez@suse.com
- Update to version 0.2.19
POWER:
* Optimize BLAS on Power8
* Fixed Julia+OpenBLAS bugs on Power8
MIPS:
* Optimize BLAS on MIPS P5600 and I6400
ARM:
* Improved on ARM Cortex-A57
-------------------------------------------------------------------
Wed Apr 13 08:12:19 UTC 2016 - dmitry_r@opensuse.org
- Update to version 0.2.18
ARM:
* Provide DGEMM 8x4 kernel for Cortex-A57
POWER:
* Optimize S and C BLAS3 on Power8
* Optimize BLAS2/1 on Power8
-------------------------------------------------------------------
Mon Mar 21 21:15:39 UTC 2016 - dmitry_r@opensuse.org
- Update to version 0.2.17
* Enable BUILD_LAPACK_DEPRECATED=1 by default.
-------------------------------------------------------------------
Wed Mar 16 19:35:53 UTC 2016 - idonmez@suse.com
- Update to version 0.2.16
* Upgrade LAPACK to 3.6.0 version.
* Disable multi-threading for small size swap and ger.
* Improve small zger, zgemv, ztrmv using stack alloction.
* Let openblas_get_num_threads return the number of active threads.
* Fix LAPACK Dormbr, Dormlq bug.
* Avoid potential getenv segfault.
* Import LAPACK svn bugfix #142-#147,#150-#155
x86/x86_64:
* Optimize trsm kernels for AMD Bulldozer, Piledriver, Steamroller.
* Detect Intel Avoton.
* Detect AMD Trinity, Richland, E2-3200.
* Optimize c/zgemv for AMD Bulldozer, Piledriver, Steamroller
* Fix bug with scipy linalg test.
ARM:
* Support and optimize Cortex-A57 AArch64.
* Update ARMV6 kernels.
* Improve DGEMM for ARM Cortex-A57.
POWER:
* Fix detection of POWER architecture.
* Optimize D and Z BLAS3 functions for Power8.
- Remove openblas-libs.patch, not needed.
-------------------------------------------------------------------
Tue Oct 27 21:11:50 UTC 2015 - dmitry_r@opensuse.org
- Update to version 0.2.15
* Enable MAX_STACK_ALLOC flags by default.
* Improve ger and gemv for small matrices.
* Improve gemv parallel with small m and large n case.
* Improve ?imatcopy when lda==ldb
* Add vecLib benchmarks
* Fix LAPACK lantr for row major matrices
* Fix LAPACKE lansy
* Import bug fixes for LAPACKE s/dormlq, c/zunmlq
* Raise the signal when pthread_create fails
* Drop obsolete openblas-arm64-build.patch
x86/x86-64:
* Support pure C generic kernels for x86/x86-64.
* Support Intel Boardwell and Skylake by Haswell kernels.
* Support AMD Excavator by Steamroller kernels.
* Optimize s/d/c/zdot for Intel SandyBridge and Haswell.
* Optimize s/d/c/zdot for AMD Piledriver and Steamroller.
* Optimize s/d/c/zapxy for Intel SandyBridge and Haswell.
* Optimize s/d/c/zapxy for AMD Piledriver and Steamroller.
* Optimize d/c/zscal for Intel Haswell, dscal for Intel SandyBridge.
* Optimize d/c/zscal for AMD Bulldozer, Piledriver and Steamroller.
* Optimize s/dger for Intel SandyBridge.
* Optimize s/dsymv for Intel SandyBridge.
* Optimize ssymv for Intel Haswell.
* Optimize dgemv for Intel Nehalem and Haswell.
* Optimize dtrmm for Intel Haswell.
ARM:
* Support Android NDK armeabi-v7a-hard ABI (-mfloat-abi=hard)
* Fix lock, rpcc bugs
POWER:
* Support ppc64le platform (ELF ABI v2)
* Support POWER7/8 by POWER6 kernels.
-------------------------------------------------------------------
Wed Jul 29 21:13:47 UTC 2015 - dmitry_r@opensuse.org
- Change library name suffix
* drop openblas-soname.patch
- Add RPM %post script for manual BLAS/LAPACK update-alternatives
configuration update
- Use update-alternatives mechanism for OpenBLAS variants (serial,
openmp, pthreads). pthreads variant is default for x86 and x86_64,
OpenMP for other architectures.
- Fix build on ARM64
* openblas-arm64-build.patch
- Add update-alternatives mechanism for CBLAS
- Provide cmake module
- Delete info about host cpu from openblas_config.h for dynamic arch
- Add update-alternatives to 'preup' and 'post' requires list for
libraries
- Add README.SUSE
-------------------------------------------------------------------
Wed Mar 25 08:05:20 UTC 2015 - dmitry_r@opensuse.org
- Update to version 0.2.14
* Improve ger and gemv for small matrices by stack allocation.
e.g. make -DMAX_STACK_ALLOC=2048
* Introduce openblas_get_num_threads and openblas_get_num_procs.
* Add ATLAS-style ?geadd function.
* Fix c/zsyr bug with negative incx.
* Fix race condition during shutdown causing a crash in
gotoblas_set_affinity().
x86/x86-64:
* Support AMD Streamroller.
ARM:
* Add Cortex-A9 and Cortex-A15 targets.
-------------------------------------------------------------------
Wed Dec 3 16:06:49 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.13
* Add SYMBOLPREFIX and SYMBOLSUFFIX makefile options
for adding a prefix or suffix to all exported symbol names
in the shared library.
* Remove openblas-0.1.0-soname.patch
* Add openblas-soname.patch
* Rebase openblas-noexecstack.patch
x86/x86-64:
* Add generic kernel files for x86-64. make TARGET=GENERIC
* Fix a bug of sgemm kernel on Intel Sandy Bridge.
* Fix c_check bug on some amd64 systems.
ARM:
* Support APM's X-Gene 1 AArch64 processors.
* Optimize trmm and sgemm.
-------------------------------------------------------------------
Fri Oct 17 13:09:58 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.12
* Added CBLAS interface for ?omatcopy and ?imatcopy.
* Enable ?gemm3m functions.
* Added benchmark for ?gemm3m.
* Optimized multithreading lower limits.
* Disabled SYMM3M and HEMM3M functions because of segment violations.
x86/x86-64:
* Improved axpy and symv performance on AMD Bulldozer.
* Improved gemv performance on modern Intel and AMD CPUs.
-------------------------------------------------------------------
Mon Aug 18 12:43:10 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.11
* Added some benchmark codes.
x86/x86-64:
* Improved s/c/zgemm performance for Intel Haswell.
* Improved s/d/c/zgemv performance.
* Support the big numa machine.(EXPERIMENT)
ARM:
* Fix detection when cpuinfo uses "Processor".
-------------------------------------------------------------------
Thu Jul 17 20:44:58 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.10
* Added BLAS extensions as following.
s/d/c/zaxpby, s/d/c/zimatcopy, s/d/c/zomatcopy.
* Added OPENBLAS_CORETYPE environment for dynamic_arch. (a86d34)
* Support outputing the CPU corename on runtime.(#407)
* Patched LAPACK to fix bug 114, 117, 118.
(http://www.netlib.org/lapack/bug_list.html)
* Disabled ?gemm3m for a work-around fix. (#400)
* Fixed lots of bugs for optimized kernels on sandybridge,Haswell,
bulldozer, and piledriver.
* Remove obsolete openblas-0.2.9-gcc-warnings.patch
-------------------------------------------------------------------
Tue Jun 10 14:34:02 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.9
* Update LAPACK to 3.5.0 version
* Fixed compatiable issues with Clang and Pathscale compilers.
* Added OPENBLAS_VERBOSE environment variable.(#338)
* Make OpenBLAS thread-pool resilient to fork via pthread_atfork.
(#294)
* Rewrote rotmg
* Fixed sdsdot bug.
* Improved the result for LAPACK testing. (#372)
x86/x86-64:
* Optimization on Intel Haswell.
* Enable optimization kernels on AMD Bulldozer and Piledriver.
* Detect Intel Haswell for new Macbook.
* To improve LAPACK testing, we fallback some kernels. (#372)
https://github.com/xianyi/OpenBLAS/wiki/Fixed-optimized-kernels-To-do-List
ARM:
* Support ARMv6 and ARMv7 ISA.
* Optimization on ARM Cortex-A9.
- Update patches:
* openblas-0.2.8-libs.patch
* openblas-0.2.8-noexecstack.patch
to
* openblas-libs.patch
* openblas-noexecstack.patch
- Fix gcc warnings (#385)
* openblas-0.2.9-gcc-warnings.patch
-------------------------------------------------------------------
Sat Apr 12 09:02:16 UTC 2014 - dmitry_r@opensuse.org
- Remove files with problematic licenses
-------------------------------------------------------------------
Fri Apr 4 20:32:24 UTC 2014 - dmitry_r@opensuse.org
- Update to version 0.2.8
* Add executable stack markings.
* Respect user's LDFLAGS
* Rollback bulldozer and piledriver kernels to barcelona kernels
* update openblas-0.2.6-libs.patch
* update c_xerbla_no-void-return.patch
* update openblas-0.2.7-noexecstack.patch
-------------------------------------------------------------------
Fri Jul 26 20:31:17 UTC 2013 - scorot@free.fr
- version 0.2.7
* Support LSB (Linux Standard Base) 4.1.
e.g. make CC=lsbcc
* Include LAPACK 3.4.2 source codes to the repo.
Avoid downloading at compile time.
* Add NO_PARALLEL_MAKE flag to disable parallel make.
* Create openblas_get_parallel to retrieve information which
parallelization model is used by OpenBLAS. (Thank
grisuthedragon)
* Detect LLVM/Clang compiler.
* A walk round for dtrti_U single thread bug. Replace it with
LAPACK codes. (#191)
* Optimize c/zgemm, trsm, dgemv_n, ddot, daxpy, dcopy on
AMD Bulldozer. (Thank Werner Saar)
* Add Intel Haswell support (using Sandybridge optimizations).
(Thank Dan Luu)
* Add AMD Piledriver support (using Bulldozer optimizations).
* Fix the computational error in zgemm avx kernel on
Sandybridge. (#237)
* Fix the overflow bug in gemv.
* Fix the overflow bug in multi-threaded BLAS3, getrf when
NUM_THREADS is very large.(#214, #221, #246).
- rebase patch noexecstack.patch
- remove lapack source tarball since lapack sources are included
in openblas sources
- increase NUM_THREAD from 32 to 64
-------------------------------------------------------------------
Sat Mar 2 16:08:16 UTC 2013 - scorot@free.fr
- version 0.2.6
* Improved OpenMP performance slightly. (d744c9)
* Improved cblas.h compatibility with Intel MKL.(#185)
* Fixed the overflowing bug in single thread cholesky
factorization.
* Fixed the overflowing buffer bug of multithreading hbmv and
sbmv.(#174)
* Added AMD Bulldozer x86-64 S/DGEMM AVX kernels. (Thank
Werner Saar) We will tune the performance in future.
* Auto-detect Intel Xeon E7540.
* Fixed the overflowing buffer bug of gemv. (#173)
* Fixed the bug of s/cdot about invalid reading NAN on
x86_64. (#189)
- rebase patch0 openblas-0.2.6-libs.patch
-------------------------------------------------------------------
Sun Feb 17 14:10:55 UTC 2013 - jengelh@inai.de
- Remove redundant cleaning commands
- Do not create .so.0.2.5. SO versions are not package release
numbers.
-------------------------------------------------------------------
Mon Jan 21 20:19:13 UTC 2013 - scorot@free.fr
- use Requires(post) and Requires(preun) instead of PreReq
- add patch markups in spec file
-------------------------------------------------------------------
Tue Jan 15 20:42:00 UTC 2013 - scorot@free.fr
- add update-alternatives support to allow easy switching between
the different blas and lapack implementations
-------------------------------------------------------------------
Fri Nov 30 20:46:47 UTC 2012 - scorot@free.fr
- version 0.2.5
* Export LAPACK 3.4.2 symbols in shared library. (#147)
* Restore the original CPU affinity when calling
openblas_set_num_threads(1) (#153)
* Fixed a SEGFAULT bug in dgemv_t when m is very large.(#154)
-------------------------------------------------------------------
Mon Oct 8 19:12:49 UTC 2012 - scorot@free.fr
- version 0.2.4
* Upgraded LAPACK to 3.4.2 version. (#145)
* f77blas.h:compatibility for compilers without C99 complex
number support. (#141)
* Added NO_AVX flag. Check OS supporting AVX on runtime. (#139)
-------------------------------------------------------------------
Mon Aug 20 21:30:03 UTC 2012 - scorot@free.fr
- version 0.2.3
* Fixed LAPACK unstable bug about ?laswp. (#130)
* Fixed the shared library bug about unloading the library on
Linux (#132).
-------------------------------------------------------------------
Sun Jul 8 20:24:03 UTC 2012 - scorot@free.fr
- version 0.2.2
* Support Intel Sandy Bridge 22nm desktop/mobile CPU
-------------------------------------------------------------------
Mon Jul 2 20:45:57 UTC 2012 - scorot@free.fr
- version 0.2.1
* Fixed the SEGFAULT bug about hyper-theading
* Support AMD Bulldozer by using GotoBLAS2 AMD Barcelona codes
* Removed the limitation (64) of numbers of CPU cores.
Now, it supports 256 cores at max.
* Supported clang compiler.
* Fixed some build bugs on FreeBSD
* Optimized Level-3 BLAS on Intel Sandy Bridge x86-64 by AVX
instructions.
* Support AMD Bobcat by using GotoBLAS2 AMD Barcelona codes.
- update patch3
-------------------------------------------------------------------
Wed May 2 21:16:16 UTC 2012 - scorot@free.fr
- update patch0
-------------------------------------------------------------------
Wed May 2 20:45:18 UTC 2012 - scorot@free.fr
- again fix remaining library file name error in spec file
-------------------------------------------------------------------
Wed May 2 20:18:48 UTC 2012 - scorot@free.fr
- fix wrong library file name version
-------------------------------------------------------------------
Wed May 2 20:05:55 UTC 2012 - scorot@free.fr
- Update to version 0.1.1
* Upgraded LAPACK to 3.4.1 version. (Thank Zaheer Chothia)
* Supported LAPACKE, a C interface to LAPACKE. (Thank Zaheer Chothia)
* Fixed the build bug (MD5 and download) on Mac OSX.
* Auto download CUnit 2.1.2-2 from SF.net with UTEST_CHECK=1.
x86/x86_64:
* Auto-detect Intel Sandy Bridge Core i7-3xxx & Xeon E7 Westmere-EX.
* Test alpha=Nan in dscale.
* Fixed a SEGFAULT bug in samax on x86 windows.
-------------------------------------------------------------------
Wed Apr 25 21:46:07 UTC 2012 - scorot@free.fr
- version 0.1.0
- update openblas-0.1.0-soname.patch
- add openblas-0.1.0-noexecstack.patch
- spec file cleanup
-------------------------------------------------------------------
Mon Mar 12 22:19:17 UTC 2012 - scorot@free.fr
- version 0.1alpha2.5
