File fetchmail.changes of Package fetchmail.22404
-------------------------------------------------------------------
Wed Jan 12 10:39:18 UTC 2022 - David Anes <david.anes@suse.com>
- fix [bsc#1194203]:
* Always create fetchmail group, even if the user is already
present, as a leftover from Leap 15.2 upgrade. This may happen
also if user is messing with groups/users directly or upgrading
from even an older fetchmail versions.
-------------------------------------------------------------------
Wed Oct 27 15:29:16 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Update to 6.4.22 in SLE-15-SP2:
[jsc#SLE-18159, jsc#SLE-17903, jsc#SLE-18059]
* Remove all python2 dependencies [bsc#1190896]
* Remove fetchmail-CVE-2021-39272.patch fixed in the update
-------------------------------------------------------------------
Wed Oct 27 15:00:19 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Update to 6.4.22: [bsc#1190069, CVE-2021-39272]
* OPENSSL AND LICENSING NOTE:
- fetchmail 6.4.22 is compatible with OpenSSL 1.1.1 and 3.0.0.
OpenSSL's licensing changed between these releases from dual
OpenSSL/SSLeay license to Apache License v2.0, which is
considered incompatible with GPL v2 by the FSF. For
implications and details, see the file COPYING.
* SECURITY FIXES:
- CVE-2021-39272: fetchmail-SA-2021-02: On IMAP connections,
without --ssl and with nonempty --sslproto, meaning that
fetchmail is to enforce TLS, and when the server or an attacker
sends a PREAUTH greeting, fetchmail used to continue an
unencrypted connection. Now, log the error and abort the
connection. --Recommendation for servers that support
SSL/TLS-wrapped or "implicit" mode on a dedicated port
(default 993): use --ssl, or the ssl user option in an rcfile.
- On IMAP and POP3 connections, --auth ssh no longer prevents
STARTTLS negotiation.
- On IMAP connections, fetchmail does not permit overriding
a server-side LOGINDISABLED with --auth password any more.
- On POP3 connections, the possibility for RPA authentication
(by probing with an AUTH command without arguments) no longer
prevents STARTTLS negotiation.
- For POP3 connections, only attempt RPA if the authentication
type is "any".
* BUG FIXES:
- On IMAP connections, when AUTHENTICATE EXTERNAL fails and we
have received the tagged (= final) response, do not send "*".
- On IMAP connections, AUTHENTICATE EXTERNAL without username
will properly send a "=" for protocol compliance.
- On IMAP connections, AUTHENTICATE EXTERNAL will now check if
the server advertised SASL-IR (RFC-4959) support and otherwise
refuse (fetchmail <= 6.4 has not supported and does not support
the separate challenge/response with command continuation)
- On IMAP connections, when --auth external is requested but not
advertised by the server, log a proper error message.
- Fetchmail no longer crashes when attempting a connection with
--plugin "" or --plugout "".
- Fetchmail no longer leaks memory when processing the arguments
of --plugin or --plugout on connections.
- On POP3 connections, the CAPAbilities parser is now caseblind.
- Fix segfault on configurations with "defaults ... no envelope".
This is a regression in fetchmail 6.4.3 and happened when
plugging memory leaks, which did not account for that the
envelope parameter is special when set as "no envelope". The
segfault happens in a constant strlen(-1), triggered by trusted
local input => no vulnerability.
- Fix program abort (SIGABRT) with "internal error" when invalid
sslproto is given with OpenSSL 1.1.0 API compatible SSL
implementations.
* CHANGES:
- IMAP: When fetchmail is in not-authenticated state and the server
volunteers CAPABILITY information, use it and do not re-probe.
(After STARTTLS, fetchmail must and will re-probe explicitly.)
- For typical POP3/IMAP ports 110, 143, 993, 995, if port and --ssl
option do not match, emit a warning and continue.
- fetchmail.man and README.SSL were updated in line with
RFC-8314/8996/8997 recommendations to prefer Implicit TLS
(--ssl/ssl) and TLS v1.2 or newer, placing --sslproto tls1.2+
more prominently. The defaults shall not change between 6.4.X
releases for compatibility.
* Rebase patches:
fetchmail-add-imap-oauthbearer-support.patch
fetchmail-add-query_to64_outsize-utility-function.patch
fetchmail-support-oauthbearer-xoauth2-with-pop3.patch
-------------------------------------------------------------------
Fri Oct 8 09:43:11 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Security fix: [bsc#1190069, CVE-2021-39272]
* Fix failure to enforce STARTTLS session encryption in some
circumstances, such as a certain situation with IMAP and PREAUTH.
* Advisory: https://www.fetchmail.info/fetchmail-SA-2021-02.txt
* Add fetchmail-CVE-2021-39272.patch
-------------------------------------------------------------------
Tue Sep 14 08:55:42 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Modified:
* fetchmail.service
-------------------------------------------------------------------
Tue Aug 24 17:55:58 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Update to 6.4.21 in SLE-15-SP2:
[jsc#SLE-18159, jsc#SLE-17903, jsc#SLE-18059]
* Remove patches fixed upstream:
- fetchmail-SNI-hostname-support.patch
- fetchmail-CVE-2021-36386.patch
- fetchmail-PASSWORDLEN-256.patch
-------------------------------------------------------------------
Tue Aug 24 16:50:40 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Update to 6.4.21:
* REGRESSION FIX: The new security fix in 6.4.20 for
CVE-2021-36386 caused truncation of messages logged to
buffered outputs, predominantly --logfile.
-------------------------------------------------------------------
Thu Jul 29 08:51:23 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Security fix: [bsc#1188875, CVE-2021-36386]
* DoS or information disclosure in some configurations.
* See also: https://www.fetchmail.info/fetchmail-SA-2021-01.txt
* Add fetchmail-CVE-2021-36386.patch
-------------------------------------------------------------------
Thu Jul 29 07:57:07 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Update to 6.4.20: [bsc#1188875, CVE-2021-36386]
* CVE-2021-36386: DoS or information disclosure in some configurations.
When a log message exceeds c. 2 kByte in size, for instance,
with very long header contents, and depending on verbosity
option, fetchmail can crash or misreport each first log message
that requires a buffer reallocation. fetchmail then reallocates
memory and re-runs vsnprintf() without another call to va_start(),
so it reads garbage. The exact impact depends on many factors
around the compiler and operating system configurations used and
the implementation details of the stdarg.h interfaces of the two
functions mentioned before.
-------------------------------------------------------------------
Mon Jul 12 11:48:40 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Change PASSWORDLEN from 64 to 256 [bsc#1188034]
* Add fetchmail-PASSWORDLEN-256.patch
-------------------------------------------------------------------
Thu May 13 16:57:09 UTC 2021 - Jeff Mahoney <jeffm@suse.com>
- Backported support for OAUTH2 authentication from Fetchmail 7.0.
- add imap oauthbearer support
- support oauthbearer/xoauth2 with pop3
- add passwordfile and passwordfd options
- add contrib/fetchnmail-oauth2.py token acquisition utility
- FAQ: list gmail options including oauthbearer and app password
- give each ctl it's own copy of password
- re-read passwordfile on every poll
- add query_to64_outsize() utility function
- Chase and integrate interface change.
- oauth2.c: calculate and pass in correct buffer size to to64frombits()
- Increase max password length to handle oauth tokens
- Bump max. passwordlen to 10000 bytes.
- Add README.OAUTH2
- Added patches:
* fetchmail-add-imap-oauthbearer-support.patch
* fetchmail-support-oauthbearer-xoauth2-with-pop3.patch
* fetchmail-add-passwordfile-and-passwordfd-options.patch
* fetchmail-add-contrib-fetchnmail-oauth2.py-token-acquisition-u.patch
* fetchmail-FAQ-list-gmail-options-including-oauthbearer-and-app.patch
* fetchmail-give-each-ctl-it-s-own-copy-of-password.patch
* fetchmail-re-read-passwordfile-on-every-poll.patch
* fetchmail-add-query_to64_outsize-utility-function.patch
* fetchmail-chase-and-integrate-interface-change.patch
* fetchmail-oauth2-c-calculate-and-pass-in-correct-buffer-size-to-to64frombits.patch
* fetchmail-increase-max-password-length-to-handle-oauth-tokens.patch
* fetchmail-bump-max-passwordlen-to-1bytes.patch
* fetchmail-add-readme-oauth2-issue-27.patch
-------------------------------------------------------------------
Sat May 8 19:55:09 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update to 6.4.19:
* fetchmailconf: properly catch and report option parsing errors
* LMTP: do not try to validate the last component of a UNIX-domain LMTP socket
as though it were a TCP port.
-------------------------------------------------------------------
Tue Apr 6 02:13:46 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update to 6.4.18:
* fetchmailconf: fetchmail 6.4.16 added --sslcertfile to the configuration dump,
but fetchmailconf support was incomplete in Git 7349f124 and it could not
parse sslcertfile, thus the user settings editor came up empty with console
errors printed. Fix configuration parser in fetchmailconf.
* fetchmailconf: do not require fetchmail for -V. do not require Tk (Tkinter)
for -d option. This is to fail more gracefully on incomplete installs.
* TLS code: remove OPENSSL_NO_DEPRECATED macros to avoid portability issues
with OpenSSL v3 - these are for development purposes, not production.
* TLS futureproofing: use SSL_use_PrivateKey_file instead of
SSL_use_RSAPrivateKey_file, the latter will be deprecated with OpenSSL v3,
and the user's key file might be something else than RSA.
* IMAP client: it used to leak memory for username and password when trying
the LOGIN (password-based) authentication and encountered a timeout situation.
* dist-tools/getstats.py: also counts lines in *.py files, shown above.
* fetchmail.man: now mentions that you may need to add --ssl when specifying
a TLS-wrapped port.
* fetchmailconf: --version (-V) now prints the Python version in use.
-------------------------------------------------------------------
Mon Mar 1 08:45:44 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- Set the hostname for SNI when using TLS [bsc#1182807]
- Add fetchmail-SNI-hostname-support.patch
-------------------------------------------------------------------
Mon Mar 1 07:51:03 UTC 2021 - Pedro Monreal <pmonreal@suse.com>
- update to 6.4.16:
* fetchmail's --configdump, and fetchmailconf, lacked support for
the sslcertfile option.
* fetchmail --version [fetchmail -V] now queries and prints the
SSL/TLS library's "SSL default trusted certificate" file or
directory (mind the word "default"), where the OpenSSL-compatible
TLS implementation will look for trusted root, meaning
certification authority (CA), certificates.
* fetchmail --version now prints version of the OpenSSL library
that it was compiled against, and that it is using at runtime,
and also the OPENSSL_DIR and OPENSSL_ENGINES_DIR (if available).
-------------------------------------------------------------------
Mon Jan 4 10:28:06 UTC 2021 - Dirk Müller <dmueller@suse.com>
- update to 6.4.15:
* Fix a typo in the manual page reported by David McKelvie.
* Fix cross-compilation with openssl, by Fabrice Fontaine. Merge request !23.
* Fix truncation of SMTP PLAIN AUTH with ^ in credentials, by Earl Chew.
-------------------------------------------------------------------
Sat Dec 19 09:52:39 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- update to 6.4.14:
* sr: Мирослав Николић (Miroslav Nikolić) [Serbian]
* Errors about lock file (= pidfile) creation could be lost in daemon
configurations (-d option, or set daemon) when using syslog. Now they are also
logged to syslog. Found verifying a pidfile creation issue on 6.4.12 that was
previously reported by Alex Hall of Automatic Distributors.
* If the lock file cannot be removed (no write permission on directory), try
to truncate it, and if that fails, report error.
* If the pidfile was non-default, fetchmail -q or --quit would malfunction and
claim no other fetchmail were running, because it did not read the
configuration files or merge the command line options, thus it would look for
the PID in the wrong file.
-------------------------------------------------------------------
Fri Dec 18 09:39:19 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>
- Don't require systemd
- Use tmpfiles for all files
- Use systemd macro for tmpfiles
- Don't delete home directory if the user stays
- Use sysusers config to create system user
-------------------------------------------------------------------
Fri Sep 4 20:22:16 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- update to 6.4.12:
# REGRESSION FIX:
* configure: fetchmail 6.4.9 and 6.4.10 would miss checking for TLS v1.2 and
TLS v1.3 support if AC_LIB_LINKFLAGS came up with something such as
/path/to/libssl.so, rather than -lssl. (For instance on FreeBSD)
* configure: fetchmail 6.4.9's configure was unable to pick up OpenSSL
if it wasn't announced by pkg-config, for instance, on FreeBSD
-------------------------------------------------------------------
Fri Aug 28 10:08:46 UTC 2020 - Callum Farmer <callumjfarmer13@gmail.com>
- De-hardcode /usr/lib path for launch executable (bsc#1174075)
- Spec file cleanups
-------------------------------------------------------------------
Wed Aug 26 17:48:08 UTC 2020 - Pedro Monreal Gonzalez <pmonreal@suse.com>
- Update fetchmail.keyring file
- Use %{_prefix}/lib instead of %{_libexecdir}
-------------------------------------------------------------------
Mon Aug 24 12:59:11 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- update to 6.4.8:
* Add a test program fm_realpath, and a t.realpath script, neither to be
installed. These will test resolution of the current working directory.
* TRANSLATION UPDATES
* Plug memory leaks when parts of the configuration (defaults, rcfile, command
line) override one another.
* fetchmail terminated the placeholder command string too late and included
garbage from the heap at the end of the string. Workaround: don't use place-
holders %h or %p in the --plugin string. Bug added in 6.4.0 when merging
Gitlab merge request !5 in order to fix an input buffer overrun.
Faulty commit 418cda65f752e367fa663fd13884a45fcbc39ddd.
* Fetchmail now checks for errors when trying to read the .idfile
* Fetchmail's error messages that reports that the defaults entry isn't the
first was made more precise. It could be misleading if there was a poll or
skip statement before the defaults.
* Fetchmail documentation was updated to require OpenSSL 1.1.1.
OpenSSL 1.0.2 reached End Of Life status at the end of the year 2019.
Fetchmail will tolerate, but warn about, 1.0.2 for now on the assumption that
distributors backport security fixes as the need arises.
Fetchmail will also warn if another SSL library that is API-compatible
with OpenSSL lacks TLS v1.3 support.
* If the trust anchor is missing, fetchmail refers the user to README.SSL.
* The AC_DECLS(getenv) check was removed, its only user was broken and not
accounting for that AC_DECLS always defines HAVE_DECL_... to 0 or 1, so
fetchmail never declared a missing getenv() symbol (it was testing with
#ifdef). Remove the backup declaration. getenv is mandated by SUSv2 anyways.
* fetchmailconf now supports Python 3 and currently requires the "future"
package, see https://pypi.org/project/future/.
* fetchmailconf: The minimum supported version is now Python 2.7.13, but it is
recommended to use at least 2.7.16 (due to its massive SSL updates).
Older Python versions may check SSL certificates not strictly enough,
which may cause fetchmail to complain later, if the certificate verify fails.
* fetchmailconf now autoprobes SSL-wrapped connections (ports 993 and 995 for
IMAP and POP3) as well and by preference.
* fetchmailconf now defaults newly created users to "ssl" if either of the
existing users sets ssl, or if the server has freshly been probed and
found supporting ssl.
There is a caveat: adding a user to an existing server without probing it
again may skip adding ssl. (This does not prevent STARTTLS.)
* Fix three bugs in fetchmail.man (one unterminated string to .IP macro, one
line that ran into a .PP macro, .TH date format), and remove one .br request
from inside the table, which is unsupported by FreeBSD 12's mandoc(1) formatter.
* Further man page fixes and additions by Chris Mayo and Gregor Zattler.
* When evaluating the need for STARTTLS in non-default configurations (SSL
certificate validation turned off), fetchmail would only consider --sslproto
tls1 as requiring STARTTLS, now all non-empty protocol versions do.
* fetchmailconf now properly writes "no sslcertck" if sslcertck is disabled.
* fetchmailconf now catches and reports OS errors (including DNS errors) when
autoprobing.
* fetchmailconf received a host of other bugfixes, see the Git commit log.
-------------------------------------------------------------------
Wed Aug 19 08:10:15 UTC 2020 - Dominique Leuenberger <dimstar@opensuse.org>
- Fix invalid usage of libexecdir where %_tmpfilesdir was meant to
be used.
-------------------------------------------------------------------
Sun Feb 2 08:25:32 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>
- pwdutils is gone long time ago
-------------------------------------------------------------------
Wed Jan 8 14:39:43 UTC 2020 - Ondřej Súkup <mimi.vx@gmail.com>
- switch to python3
- don't require python*-devel
-------------------------------------------------------------------
Fri Oct 4 12:41:35 UTC 2019 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com>
- Update to 6.4.1 [bsc#1152964]
## REGRESSION FIXES:
* The bug fix Debian Bug#941129 was incomplete and caused
- a regression in the default file locations, so that fetchmail was
no longer able to find its configuration files in some situations.
- a regression under _FORTIFY_SOURCE where PATH_MAX > minimal _POSIX_PATH_MAX.
- Update to 6.4.0
## SECURITY FIXES THAT AFFECT BEHAVIOUR AND MAY REQUIRE RECONFIGURATION
* Fetchmail no longer supports SSLv2.
* Fetchmail no longer attempts to negotiate SSLv3 by default,
even with --sslproto ssl23. Fetchmail can now use SSLv3, or TLSv1.1 or a newer
TLS version, with STLS/STARTTLS (it would previously force TLSv1.0 with
STARTTLS). If the OpenSSL version used at build and run-time supports these
versions, --sslproto ssl3 and --sslproto ssl3+ can be used to re-enable SSLv3.
Doing so is discouraged because the SSLv3 protocol is broken.
While this change is supposed to be compatible with common configurations,
users may have to and are advised to change all explicit --sslproto ssl2
(change to newer protocols required), --sslproto ssl3, --sslproto tls1 to
--sslproto auto, so that they can benefit from TLSv1.1 and TLSv1.2 where
supported by the server.
The --sslproto option now understands the values auto, ssl3+, tls1+, tls1.1,
tls1.1+, tls1.2, tls1.2+, tls1.3, tls1.3+ (case insensitively), see CHANGES
below for details.
* Fetchmail defaults to --sslcertck behaviour. A new option --nosslcertck to
override this has been added, but may be removed in future fetchmail versions
in favour of another configuration option that makes the insecurity in using
this option clearer.
## SECURITY FIXES
* Fetchmail prevents buffer overruns in GSSAPI authentication with user names
beyond c. 6000 characters in length. Reported by Greg Hudson.
## CHANGED REQUIREMENTS
* fetchmail 6.4.0 is written in C99 and requires a SUSv3 (Single Unix
Specification v3, a superset of POSIX.1-2001 aka. IEEE Std 1003.1-2001 with
XSI extension) compliant system. For now, a C89 compiler should also work
if the system is SUSv3 compliant.
In particular, older fetchmail versions had workaround for several functions
standardized in the Single Unix Specification v3, these have been removed.
The trio/ library has been removed from the distribution.
## CHANGES
* fetchmail 6.3.X is unsupported.
* fetchmail now configures OpenSSL support by default.
* fetchmail now requires OpenSSL v1.0.2 or newer.
* Fetchmail now supports --sslproto auto and --sslproto tls1+ (same as ssl23).
* --sslproto tls1.1+, tls1.2+, and tls1.3+ are now supported for
auto-negotiation with a minimum specified TLS protocol version, and --sslproto
tls1.1, --sslproto tls1.2 and --sslproto tls1.3 to force the specified TLS
protocol version. Note that tls1.3 requires OpenSSL v1.1.1 or newer.
* Fetchmail now detects if the server hangs up prematurely during SSL_connect()
and reports this condition as such, and not just as SSL connection failure.
(OpenSSL 1.0.2 reported incompatible with pop3.live.com by Jerry Seibert).
* A foreground fetchmail can now accept a few more options while another copy is
running in the background.
* fetchmail now handles POP3 --keep UID lists more efficiently, by using Rainer
Weikusat's P-Tree implementation. This reduces the complexity for handling
a large UIDL from O(n^2) to O(n log n) and becomes noticably faster with
thousands of kept messages. (IMAP does not currently track UIDs and is unaffected.)
At the same time, the UIDL emulation code for deficient servers has been
removed. It never worked really well. Servers that do not implement the
optional UIDL command only work with --fetchall option set, which in itself is
incompatible with the --keep option (it would cause message duplication).
* fetchmail, when setting up TLS connections, now uses SSL_set_tlsext_host_name()
to set up the SNI (Server Name Indication). Some servers (for instance
googlemail) require SNI when using newer SSL protocols.
* Fetchmail now sets the expected hostname through OpenSSL 1.0.2's new
X509_VERIFY_PARAM_set1_host() function to enable OpenSSL's native certificate
verification features.
* fetchmail will drop the connection when fetching with IMAP and receiving an
unexpected untagged "* BYE" response, to work around certain faulty servers.
* The FETCHMAIL_POP3_FORCE_RETR environment variable is now documented,
it forces fetchmail, when talking POP3, to always use the RETR command,
even if it would otherwise use the TOP command.
* Fetchmail's configure stage will try to query pkg-config or pkgconf for libssl
and libcrypto, in case other system use .pc files to document specific library dependencies.
* The gethostbyname() API calls and compatibility functions have been removed.
* These translations are shipped but not installed by default because
they have less than 500 translated messages out of 714: el fi gl pt_BR sk tr
-> Greek, Finnish, Galician, Brazilian Portuguese, Slovak, Turkish.
* Fetchmail now refuses delivery if the MDA option contains single-quoted expansions.
## FIXES
* Do not translate header tags such as "Subject:".
* Convert most links from berlios.de to sourceforge.net.
* Report error to stderr, and exit, if --idle is combined with multiple accounts.
* Point to --idle from GENERAL OPERATION to clarify --idle and multiple mailboxes do not mix.
* Fix SSL-enabled build on systems that do not declare SSLv3_client_method(),
or that #define OPENSSL_NO_SSL3 inside #include <openssl/ssl.h>
* Version report lists -SSLv3 on SSL-enabled no-ssl3 builds.
* Fetchmail no longer adds a NUL byte to the username in GSSAPI authentication.
This was reported to break Kerberos-based authentication with Microsoft Exchange 2013
* Set umask properly before writing the .fetchids file, to avoid failing the
security check on the next run.
* When forwarding by LMTP, also check antispam response code when collecting
the responses after the CR LF . CR LF sequence at the end of the DATA phase.
* fetchmail will not try other protocols after a socket error. This avoids mismatches
of how different prococols see messages as "seen" and re-fetches of known mail.
* fetchmail no longer reports "System error during SSL_connect(): Success."
* fetchmailconf would ignore Edit or Delete actions on the first (topmost)
item in a list (no matter if server list, user list, ...).
* The mimedecode feature now properly detects multipart/mixed-type matches, so
that quoted-printable-encoded multipart messages can get decoded.
(Regression in 5.0.0 on 1999-03-27, as a side effect of a PGP-mimedecode fix
attributed to Henrik Storner.)
* FETCHMAILHOME can now safely be a relative path, which will be qualified
through realpath(). Previously, it had to be absolute in daemon mode.
## KNOWN BUGS AND WORKAROUNDS
(This section floats upwards through the NEWS file so it stays with the
current release information)
* Fetchmail does not handle messages without Message-ID header well
(See sourceforge.net bug #780933)
* Fetchmail currently uses 31-bit signed integers in several places
where unsigned and/or wider types should have been used, for instance,
for mailbox sizes, and misreports sizes of 2 GibiB and beyond.
Fixing this requires C89 compatibility to be relinquished.
* BSMTP is mostly untested and errors can cause corrupt output.
* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit fetchmail.
* Fetchmail does not track pending deletes across crashes.
* The command line interface is sometimes a bit stubborn, for instance,
fetchmail -s doesn't work with a daemon running.
* Linux systems may return duplicates of an IP address in some circumstances if
no or no global IPv6 addresses are configured.
(No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
messages. This will not be fixed, because the maintainer has no Kerberos 5
server to test against. Use GSSAPI.
- Remove patches merged upstream:
* fetchmail-openssl11.patch
* fetchmail-fetchmailconf-python3-1of3.patch
* fetchmail-fetchmailconf-python3-2of3.patch
* fetchmail-fetchmailconf-python3-3of3.patch
- Rebase fetchmail-6.3.8-smtp_errors.patch
-------------------------------------------------------------------
Fri May 31 08:05:50 UTC 2019 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com>
- Remove comment about not available FETCHMAIL_USER configuration
variable in sysconfig.fetchmail (bsc#1136538)
-------------------------------------------------------------------
Wed May 29 11:58:18 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Use Debian 02_remove_SSLv3 change set based on beta 6.4.0 to
modernize the patch fetchmail-openssl11.patch for modern TLS
(auto) support
-------------------------------------------------------------------
Thu Mar 15 17:12:10 UTC 2018 - pmonrealgonzalez@suse.com
- Fix fetchmailconf to compile with python{2,3} [bsc#1082694]
* fetchmail-fetchmailconf-python3-1of3.patch
* fetchmail-fetchmailconf-python3-2of3.patch
* fetchmail-fetchmailconf-python3-3of3.patch
-------------------------------------------------------------------
Fri Mar 2 19:32:52 UTC 2018 - pmonrealgonzalez@suse.com
- By default, the status messages are redirected to
/var/log/fetchmail. The syslog option or no-logging are also
available. (bsc#1033081)
-------------------------------------------------------------------
Thu Nov 23 13:43:10 UTC 2017 - rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
-------------------------------------------------------------------
Mon Nov 13 17:18:00 UTC 2017 - vcizek@suse.com
- drop SSLv3 support to build with openssl 1.1 (bsc#1066940)
* add fetchmail-openssl11.patch
-------------------------------------------------------------------
Fri Apr 28 13:55:29 UTC 2017 - pmonrealgonzalez@suse.com
- Allow --syslog option in daemon mode (bsc#1033081).
* By default, the status messages are redirected to the syslog.
-------------------------------------------------------------------
Fri Mar 31 06:17:12 UTC 2017 - meissner@suse.com
- prerequire group(daemon) to meet new tumbleweed user handling
-------------------------------------------------------------------
Fri May 13 19:33:41 UTC 2016 - jengelh@inai.de
- Check for user/group existence before attempting to add them,
and remove error suppression from these calls.
- Ensure tmpfile creation is run
-------------------------------------------------------------------
Fri May 13 12:06:54 UTC 2016 - pjanouch@suse.de
- Made the helper script introduced in last change return exit status
5 on configuration errors instead of 1, which should make it a bit
less confusing (bsc#979534)
-------------------------------------------------------------------
Fri Apr 8 12:20:27 UTC 2016 - pjanouch@suse.de
- Made /etc/sysconfig/fetchmail work again after a botched systemd
conversion that ignored the file altogether (bsc#905673)
- Removed the FETCHMAIL_USER setting in favor of editing the
systemd service file (which should be copied to the respective
location in /etc, and not edited in-place)
-------------------------------------------------------------------
Thu Jan 8 16:04:11 UTC 2015 - tchvatal@suse.com
- Cleanup with spec-cleaner
- Remove support for <12.3 as it does not build anyway.
- Fix krb5 switches
- Provide proper rcbla controler for the service
-------------------------------------------------------------------
Mon Dec 29 13:46:10 UTC 2014 - meissner@suse.com
- build with PIE
-------------------------------------------------------------------
Fri Dec 5 13:06:55 UTC 2014 - lmuelle@suse.com
- Removed executable permission bits from fetchmail.service file.
- Update the project url in the spec file after Berlios shutdown.
- Remove dependency on gpg-offline as signature checking is implemented in the
source validator.
-------------------------------------------------------------------
Sun Nov 09 03:40:00 UTC 2014 - Led <ledest@gmail.com>
- fix bashism in postun script
-------------------------------------------------------------------
Wed May 21 09:51:34 UTC 2014 - jsegitz@novell.com
- added necessary macros for systemd files
-------------------------------------------------------------------
Sun Oct 27 18:18:54 UTC 2013 - p.drouand@gmail.com
- Add systemd support for openSUSE >= 12.3
-------------------------------------------------------------------
Mon Apr 29 12:45:09 UTC 2013 - vcizek@suse.com
- added offline gpg verification
- update to 6.3.26
# CRITICAL BUG FIX for setups using "mimedecode":
* The mimedecode feature failed to ship the last line of the body if it was
encoded as quoted-printable and had a MIME soft line break in the very last
line. Reported by Lars Hecking in June 2011.
* Bug introduced on 1998-03-20 when the mimedecode support was added by ESR
before release 4.4.1 through code contributed by Henrik Storner.
Workaround for older releases: do not use mimedecode feature.
* Earlier versions of this NEWS file claimed this bug fixed in fetchmail-6.3.23,
but it was not.
* Fixes Launchpad Bug#1171818.
-------------------------------------------------------------------
Tue Mar 19 10:28:33 UTC 2013 - vcizek@suse.com
- update to 6.3,25
# CRITICAL AND REGRESSION FIXES
* Plug a memory leak in OpenSSL's certificate verification callback.
This would affect fetchmail configurations running with SSL in daemon mode
more than one-shot runs.
Reported by Erik Thiele, and pinned by Dominik Heeg,
fixes Debian Bug #688015.
This bug was introduced into fetchmail 6.3.0 (committed 2005-10-29)
when support for subjectAltName was added through a patch by Roland
Stigge, submitted as Debian Bug#201113.
* The --logfile option now works again outside daemon mode, reported by Heinz
Diehl. The documentation that I had been reading was inconsistent with the
code, and only parts of the manual page claimed that --logfile was only
effective in daemon mode.
# BUG FIXES
* Fix a memory leak in out-of-memory error condition while handling plugins.
Report and patch by John Beck (found with Parfait static code analyzer).
* Fix a NULL pointer dereference in out-of-memory error condition while handling
plugins.
Report and patch by John Beck (found with Parfait static code analyzer).
# CHANGES
* Improved reporting when SSL/TLS X.509 certificate validation has failed,
working around a not-so-recent swapping of two OpenSSL error codes, and
a practical impossibility to distinguish broken certification chains from
missing trust anchors (root certificates).
* OpenSSL decoded errors are now reported through report(), rather than dumped
to stderr, so that they should show up in logfiles and/or syslog.
* The fetchmail manual page no longer claims that MD5 were the default OpenSSL
hash format (for use with --sslfingerprint). Reported by Jakob Wilk,
PARTIAL fix for Debian Bug#700266.
* The fetchmail manual page now refers the user to --softbounce from the
SMTP/ESMTP ERROR HANDLING section. Reported by Anton Shterenlikht.
-------------------------------------------------------------------
Tue Dec 11 10:21:56 UTC 2012 - vcizek@suse.com
- update to 6.3.23
# REGRESSION FIXES
* Fix compilation with OpenSSL implementations before 0.9.8m that lack
SSL_CTX_clear_options. Patch by Earl Chew.
Note that the use of older OpenSSL versions with fetchmail is unsupported and
*not* recommended.
# BUG FIXES
* Fix combination of --plugin and -f -. Patch by Alexander Zangerl,
to fix Debian Bug#671294.
* Clean up logfile vs. syslog handling, and in case logfile overrides
syslog, send a message to the latter stating where logging goes.
# CHANGES
* The build process can now be made a bit more silent and concise through
./configure --enable-silent-rules, or by adding "V=0" to the make command.
# WORKAROUNDS
* Make Maillennium POP3 workarounds less specific, to encompass
Maillennium POP3/UNIBOX (Maillennium V05.00c++). Reported by Eddie
via fetchmail-users mailing list, 2012-10-13.
# TRANSLATION UPDATES
-------------------------------------------------------------------
Mon Nov 12 15:41:55 UTC 2012 - coolo@suse.com
- do not use useradd -o without -u
-------------------------------------------------------------------
Tue Sep 11 09:09:21 UTC 2012 - vcizek@suse.com
- update to 6.3.22
# SECURITY FIXES
* CVE-2012-3482 (bnc#775988)
* CVE-2011-3389
# BUG FIX
* The Server certificate: message in verbose mode now appears on stdout like the
remainder of the output. Reported by Henry Jensen, to fix Debian Bug #639807.
* The GSSAPI-related autoconf code now matches gssapi.c better, and uses
a different check to look for GSS_C_NT_HOSTBASED_SERVICE.
This fixes the GSSAPI-enabled build on NetBSD 6 Beta.
# CHANGES
* The security and errata notices fetchmail-{EN,SA}-20??-??.txt are now
under the more relaxed CC BY-ND 3.0 license (the noncommercial clause
was dropped). The Creative Commons address was updated.
* The Python-related Makefile.am parts were simplified to avoid an automake
1.11.X bug around noinst_PYTHON, Automake Bug #10995.
* Configuring fetchmail without SSL now triggers a configure warning,
and asks the user to consider running configure --with-ssl.
# WORKAROUNDS
* Some servers, notably Zimbra, return A1234 987 FETCH () in response to
a header request, in the face of message corruption. fetchmail now treats
these as temporary errors. Report and Patch by Mikulas Patocka, Red Hat.
* Some servers, notably Microsoft Exchange, return "A0009 OK FETCH completed."
without any header in response to a header request for meeting reminder
messages (with a "meeting.ics" attachment). fetchmail now treats these as
transient errors. Report by John Connett, Patch by Sunil Shetye.
-------------------------------------------------------------------
Thu Jun 14 11:58:02 UTC 2012 - seife+obs@b1-systems.com
- dont't require, just suggest smtp_daemon -- fetchmail does run
fine (and much safer) with e.g. procmail as mda.
-------------------------------------------------------------------
Fri Dec 2 12:57:32 UTC 2011 - coolo@suse.com
- add automake as buildrequire to avoid implicit dependency
-------------------------------------------------------------------
Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de
- Apply packaging guidelines (remove redundant/obsolete
tags/sections from specfile, etc.)
-------------------------------------------------------------------
Tue Aug 30 09:09:49 UTC 2011 - puzel@suse.com
- repack upstream tarball without fetchmail-{SA,EN}-*.txt
(bnc#713698)
- add README-security.txt
-------------------------------------------------------------------
Mon Aug 22 09:12:13 UTC 2011 - puzel@novell.com
- update to fetchmail-6.3.21
- critical bug fix
- The IMAP client no longer inserts NUL bytes into the last line
of a message when it is not closed with a LF or CRLF sequence.
Reported by Antoine Levitt. As a side effect of the fix, and
in order to avoid a full rewrite, fetchmail will now
CRLF-terminate the last line fetched through IMAP, even if it
is originally not terminated by LF or CRLF. This bears no
relevance if your messages end up in mbox, but adds line
termination for storages (like Maildir) that do not require
that the last line be LF- or CRLF-terminated.
-------------------------------------------------------------------
Thu Jun 30 09:32:27 UTC 2011 - cdenicolo@novell.com
- license update: GPLv2+
remove licenses " Other uncritical OpenSource License ; Public Domain,
Freeware"
-------------------------------------------------------------------
Mon Jun 6 13:52:08 UTC 2011 - puzel@novell.com
- update to fetchmail-6.3.20
# SECURITY BUG FIXES
- CVE-2011-1947 (bnc#697368): STARTTLS: Fetchmail runs the IMAP
STARTTLS or POP3 STLS negotiation with the set timeout (default
five minutes) now. This was reported missing, with observed
fetchmail freezes beyond a week, by Thomas Jarosch.
See fetchmail-SA-2011-01.txt for further details.
# BUG FIXES
- IMAP: Do not search for UNSEEN messages in ranges. Usually,
there are very few new messages and most of the range searches
result in nothing. Instead, split the long response to make the
IMAP driver think that there are multiple lines of response.
- Do not print "skipping message" for old messages even in
verbose mode. If there are too many old messages, the logs just
get filled without any real activity.
- Build: fetchmail now always uses its own MD5 implementation
rather than trying to find a system library with matched
header. The library and header variants found on systems are
too diverse, and the code size saving is not worth any more
wasted user or programmer time.
# CHANGES
- Call strlen() only once when removing CRLF from a line.
- fetchmail sets Internet domain sockets to "keepalive" mode now.
Note that there is no portable way to configure actual timeouts
for this mode, and some systems only support a system-wide
timeout setting. fetchmail does not attempt to tune the time
spans of keepalive mode.
- remove build-time dependency on ed
- use spec-cleaner
-------------------------------------------------------------------
Mon Dec 13 11:25:12 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.19
- bugfix release
* When specifying multiple local multidrop lists, do not lose
wildcard flag. (Affects "user foo is bar baz * is joe here")
* In multidrop configurations, an asterisk can now appear
anywhere in the list of local users, not just at the end.
* In multidrop mode, header parsing is now more verbose in -vv
mode, so that it becomes possible to see which header is used.
* Make --antispam work from command line (these used to work in
rcfiles).
* Smoke test XHTML 1.1 validation, and if it fails, skip
validating HTML documents. Skip validating
Mailbox-Names-UTF7.html. Several systems have broken XHTML 1.1
DTD installations that jeopardize the build.
* Send a NOOP only after a failed STARTTLS in IMAP.
* GSSAPI verbose/debug syslog to INFO severity. Do STARTTLS/STLS
negotiation in IMAP/POP3 if it is mandatory even if the server
capabilities do not show support for upgradation to TLS. To
use this, configure --sslproto tls1.
* IMAP: Understand empty strings as FETCH response, seen on
Yahoo. Note that fetchmail continues to expect literals as
FETCH response for now.
-------------------------------------------------------------------
Mon Oct 11 08:37:09 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.18
# SECURITY IMPROVEMENTS TO DEFANG X.509 CERTIFICATE ABUSE
* Fetchmail now only accepts wildcard certificate common names
and subject alternative names if they start with "*.". Previous
versions would accept wildcards even if no period followed
immediately.
* Fetchmail now disallows wildcards in certificates to match
domain literals (such as 10.9.8.7), or wildcards in domain
literals ("*.168.23.23"). The test is overly picky and
triggers if the pattern (after skipping the initial wildcard
"*") or domain consists solely of digits and dots, and thus
matches more than needed.
* Fetchmail now disallows wildcarding top-level domains.
# CRITICAL BUG FIXES AND REGRESSION FIXES
* Fetchmail 6.3.15, 6.3.16, and 6.3.17 would pick up libmd5 to
obtain MD5* functions, as an effect of an undocumented Solaris
MD5 fix. This caused all MD5-related functions to malfunction
if, for instance, libmd5.so was installed on other operating
systems as part of libwww on machines where long isn't
32-bits, i. e. usually on 64-bit computers.
* Fetchmail 6.3.17 warned about insecure SSL/TLS connections
even if a matching --sslfingerprint was specified. This is an
omission from an SSL usability change made in 6.3.17.
* Fetchmail will now apply timeouts to the authentication stage.
This stage encompasses STARTTLS/STLS negotiation in IMAP/POP3.
Reported missing by Thomas Jarosch.
* Fetchmail now cancels GSSAPI authentication properly when
encountering GSS errors, such as no or unsuitable credentials.
It now sends an asterisk on a line by its own, as required in
SASL. This fixes protocol synchronization issues that cause
Authentication failures, often observed with kerberized MS
Exchange servers.
* Other fixes.
-------------------------------------------------------------------
Tue Aug 17 14:20:47 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.17
# SECURITY FIX
* CVE-2010-1167: Fetchmail before release 6.3.17 did not properly
sanitize external input (mail headers and UID).
# FEATURES
* Fetchmail now supports a --sslcertfile <file> option to
specify a "CA bundle" file (a file that contains trusted CA
certificates).
* Fetchmail now supports a
FETCHMAIL_INCLUDE_DEFAULT_X509_CA_CERTS environment variable
to force loading the default SSL CA certificate locations even
if --sslcertfile or --sslcertpath is used. If neither option
is in effect, fetchmail loads the default locations.
# REGRESSION FIX
* Fix string handling in rcfile scanner, which caused fetchmail
to misparse a run control file in certain circumstances.
# BUG FIXES
* Plug memory leak when using a "defaults" entry in the run
control file.
* Do not print SSL certificate mismatches unless verbose or
--sslcertck is enabled.
* Do not lose "set invisible" in fetchmailconf. (Michael Barnack)
- drop fetchmail-SA-2010-02.patch (in upstream)
-------------------------------------------------------------------
Mon Apr 19 12:36:27 UTC 2010 - puzel@novell.com
- add fetchmail-SA-2010-02.patch (bnc#597673)
-------------------------------------------------------------------
Wed Apr 14 16:00:29 UTC 2010 - puzel@novell.com
- make it possible change default fetchmailrc location using new
sysconfig option
- do not change owner of fetchmailrc in post
-------------------------------------------------------------------
Wed Apr 7 11:33:04 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.16
# BUG FIX
* Fix --interface option, broken in 6.3.15.
# CHANGE
* Call OpenSSL_add_all_algorithms(). This is needed to support
non-mandatory algorithms in certificates.
-------------------------------------------------------------------
Mon Mar 29 09:46:25 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.15
# FEATURE
* Fetchmail now supports a bad-header command line or rcfile
option that takes exactly one argument, accept or reject
(default).
# BUG FIXES
* In the rcfile, recognize "local" as abbreviation for
"localdomains", as documented.
* Do not close stdout when using mda and "bsmtp -" at the same time.
* Log operating system errors when BSMTP writes fail.
* Fix verbose mode progress formatting regression from 6.3.10;
SMTP trace lines were no longer on a line of their own. Reported
by Melchior Franz.
* Check seteuid() return value and abort running MDA if switch fails.
* Set global flags in a consistent manner. Make --nosoftbounce and
--nobounce work from command line (these used to work in rcfiles).
Reported and fix confirmed working by N.J. Mann. (Sunil Shetye)
-------------------------------------------------------------------
Fri Feb 5 11:32:55 UTC 2010 - puzel@novell.com
- update to fetchmail-6.3.14
# SECURITY FIXES
* SSL/TLS certificate information is now also reported properly
on computers that consider the "char" type signed. Fixes
malloc() buffer overrun. Workaround for older versions: do not
use verbose mode.
# BUG FIXES
* The IMAP client no longer skips messages from several IMAP
servers including Dovecot if fetchmail's "idle" is in use.
Causes were that fetchmail (a) ignored some untagged responses
when it should not (b) relied on EXISTS messages in response to
EXPUNGE, which aren't mandated by RFC-3501 (the IMAP standard)
and aren't sent by Dovecot either. Fix by Sunil Shetye (the fix
also consolidates IMAP response handling, improving overall
robustness of the IMAP client), bug report and testing by Matt
Doran, with further hints from Timo Sirainen.
* The SMTP client now recovers from errors (such as servers
dropping the connection after errors) when sending an RSET
command. Fix by Sunil Shetye. Report by James Moe.
* The IMAP client now uses "SEARCH UNSEEN" rather than "SEARCH
UNSEEN NOT DELETED" again on IMAP2, to fix a regression in
fetchmail 6.2.5 reported by Will Stringer in June 2004. (Sunil
Shetye)
* The IMAP client now uses "SEARCH UNSEEN UNDELETED" on IMAP4
and IMAP4r1 servers (Sunil Shetye).
* Workaround: The IMAP client now falls back to "FETCH n:m
FLAGS" if the server does not support "SEARCH". (Sunil Shetye)
* The IMAP client now requests message numbers in batches of
1,000 to avoid problems if there are more than 1860 unseen
messages. (Sunil Shetye) Note that this wasn't security
relevant because fetchmail would only read up to the maximum
buffer size and leave the remainder of the string unread, going
out of synch afterwards.
* Stricter validation of IMAP responses containing byte or
message counts.
- fetchmail 6.3.13 :
# REGRESSION FIXES
* The multiline SMTP error fix in release 6.3.12 caused
fetchmail to lose message codes 400..599 and treat all of these
as temporary error. This would cause messages to be left on the
server even if softbounce was turned off. Reported by Thomas
Jarosch.
-------------------------------------------------------------------
Fri Nov 13 14:10:16 UTC 2009 - puzel@novell.com
- update to fetchmail-6.3.12
# REGRESSION FIXES
* The CVS-2009-2666 fix in fetchmail release 6.3.11 caused a free() of
unallocated memory on SSL connections, which caused crashes or program aborts
on some systems (depending on how initialization and free() of unallocated
memory is handled in compiler and libc).
Workaround for older versions: run in verbose mode.
Patch courtesy of Thomas Heinz, fixes Gentoo Bug #280760.
This regression affected only the 6.3.11 release, but not the patch that was
part of the security announcement fetchmail-SA-2009-01.
# BUG FIXES
* Fix error reporting for GSSAPI on Heimdal (h5l) Kerberos.
* Look for MD5_Init in libcrypto rather than libssl, fixes Gentoo Kerberos
builds; fixes upstream parts of Gentoo Bugs #231400 and #185652, and fixes
BerliOS Bug #16134.
* Report multiline SMTP errors properly, reported by Earl Chew; fixes Debian Bug
#569899, reported by Akihiro Terasaki.
Note: This fix introduced a regression, fixed in 6.3.13.
* Replace control characters in SMTP replies by '?'.
* Fetchmailconf: Fix descriptions for smtpaddress and smtpname options;
smtpaddress is for RCPT TO, not MAIL FROM. Found by Gerard Seibert.
- update to fetchmail-6.3.13
# REGRESSION FIXES
* The multiline SMTP error fix in release 6.3.12 caused fetchmail to lose
message codes 400..599 and treat all of these as temporary error. This would
cause messages to be left on the server even if softbounce was turned off.
Reported by Thomas Jarosch.
- drop fetchmail-6.3.11-fix-invalid-free.patch (fixed upstream)
-------------------------------------------------------------------
Mon Aug 10 09:30:16 UTC 2009 - puzel@novell.com
- add fetchmail-6.3.11-fix-invalid-free.patch
- fix https://bugs.gentoo.org/280760
-------------------------------------------------------------------
Sun Aug 9 12:43:26 CEST 2009 - coolo@novell.com
- use new python macros
-------------------------------------------------------------------
Thu Aug 6 11:35:50 UTC 2009 - puzel@novell.com
- update to 6.3.11
# SECURITY BUGFIXES
* CVE-2009-2666: SSL NUL prefix impersonation attack through NULs in a
part of a X.509 certificate's CommonName and subjectAltName fields. These
fields use opaque strings with a separate length field, so that the NUL
character isn't a special character inside the certificate. Fetchmail, being
written in the C language, used to treat these strings as C strings
nonetheless, so that the domain comparison would end at the first embedded NUL
character, rather than at the real end of the string.
Fetchmail will now abort certificate verification as failed if NULs are
encountered inside either of these fields regardless of their position, and
drop the connection even if --sslcertck is not used, because NUL is not a
valid character in legitimate DNS names.
See fetchmail-SA-2009-01.txt for details, including a minimal patch.
# BUGFIXES
* Remove the spurious message "message delimiter found while scanning headers".
RFC-5322 syntax states that the delimiter is part of the body, and the body is
optional.
* Convert all non-printable characters in certificate Subject/Issuer
Common Name or Subject Alternative Name fields to ANSI-C hex escapes (\xnn,
where nn are hex digits).
-------------------------------------------------------------------
Fri Jul 3 09:58:22 CEST 2009 - puzel@novell.com
- update to 6.3.10 (final version)
-------------------------------------------------------------------
Mon Jun 1 15:00:06 CEST 2009 - puzel@suse.cz
- update to 6.3.10-beta1
# INCOMPATIBLE BUGFIXES AND CHANGES:
* Fetchmail no longer drops permanently undelivered messages by default, to
match historic documentation. It does this by adding a new "softbounce"
option, see below.
* There is a new "softbounce" global option that prevents the deletion of
messages that have not been forwarded. It defaults to "true" for fetchmail
6.3.X in order to match historic documentation. This may change its default
in the next major release.
* For other changes, please see the package changelog
- update fetchmail-6.3.8-smtp_errors.patch (partially upstreamed)
-------------------------------------------------------------------
Tue Jan 13 11:56:26 CET 2009 - puzel@suse.cz
- update to 6.3.9 final
- deleted fetchmail-fix-permissions-doc.patch (fixed upstream)
-------------------------------------------------------------------
Mon Jan 12 14:53:53 CET 2009 - puzel@suse.cz
- fix spurious messages from fetchmail.init (bnc#464037)
-------------------------------------------------------------------
Fri Nov 14 20:59:37 CET 2008 - mrueckert@suse.de
- make the kerberos handling based on suse_version instead
of sles_version
-------------------------------------------------------------------
Thu Oct 9 11:40:00 CEST 2008 - puzel@suse.cz
- fix documentation inconsistency (bnc#174287)
- mark /etc/logrotate.d/fetchmail as %config(noreplace)
-------------------------------------------------------------------
Wed Oct 1 13:15:25 CEST 2008 - puzel@suse.cz
- Fix build on SLE9
- do not build with kerberos support on SLE9
-------------------------------------------------------------------
Tue Sep 9 11:36:52 CEST 2008 - kukuk@suse.de
- Remove support for dante (deprecated, homepage not reacheable,...)
-------------------------------------------------------------------
Thu Sep 4 17:07:26 CEST 2008 - puzel@suse.cz
- update to 6.3.9rc2
- bugfix release, see package changelog for details
- removed fetchmail-6.3.8-CVE-2007-4565.patch (fixed in upstream)
- removed fetchmail-6.3.8-long_headers_segfault.patch (fixed in upstream)
-------------------------------------------------------------------
Fri Aug 22 13:58:53 CEST 2008 - puzel@suse.cz
- fix build on SLE10
- do not run autoreconf if suse_version < 1010
-------------------------------------------------------------------
Thu Jul 24 17:12:51 CEST 2008 - puzel@suse.cz
- specfile cleanup and rpmlint warning fixes
* removed obsolete 'Provides: pop'
* added logrotate dependency
* removed unnecessary python dependency
* removed unnecessary 'export CFLAGS="$RPM_OPT_FLAGS"'
- %configure macro should suffice
- initscript fixes
* obsolete X-UnitedLinux-Should-Start replaced by
Should-Start
* same with Should-Stop
* added $remote-fs dependency
-------------------------------------------------------------------
Tue Jul 1 11:53:19 CEST 2008 - puzel@suse.cz
- updated fetchmail-6.3.8-long_headers_segfault.patch from upstream
-------------------------------------------------------------------
Tue Jun 17 13:20:08 CEST 2008 - puzel@suse.cz
- kerberos (krb5) support enabled [bnc#353817]
-------------------------------------------------------------------
Wed May 28 16:58:33 CEST 2008 - puzel@suse.cz
- fixed broken oneshot option in initscript [bnc#360507]
-------------------------------------------------------------------
Thu May 22 17:44:06 CEST 2008 - puzel@suse.cz
- fixed bnc#354291
* caused segmentation fault when retrieving mail with long To:
headers
-------------------------------------------------------------------
Wed Apr 30 17:49:47 CEST 2008 - pcerny@suse.cz
- added option to specify polling interval to init script
-------------------------------------------------------------------
Fri Mar 28 18:31:11 CET 2008 - pcerny@suse.cz
- additional fix for bnc#246829
[fetchmail-6.3.8-starttls.patch ->
fetchmail-6.3.8-smtp_errors.patch]
-------------------------------------------------------------------
Wed Nov 28 14:53:25 CET 2007 - pv@suse.de
- add PreReq pwdutils #327550 - yast2-mail fetchmail error
-------------------------------------------------------------------
Thu Sep 27 20:50:39 CEST 2007 - pcerny@suse.de
- Fix for DoS vulnerability (#308271 CVE-2007-4565)
- Do not remove messages if SMTP insists on TLS (#246829)
[fetchmail-6.3.8-starttls.patch]
-------------------------------------------------------------------
Tue Sep 11 15:15:14 CEST 2007 - ro@suse.de
- remove librsaref2-devel from buildrequires (unused)
-------------------------------------------------------------------
Fri Aug 31 18:09:04 CEST 2007 - pcerny@suse.cz
- librsaref2 => librsaref2-devel [#302599]
- removed %suseversion > 800 check (insserv)
-------------------------------------------------------------------
Mon Jul 2 21:49:01 CEST 2007 - lrupp@suse.de
- rsaref => librsaref2
-------------------------------------------------------------------
Thu Apr 19 14:15:51 CEST 2007 - sbrabec@suse.cz
- Updated to version 6.3.8:
* Make the APOP challenge parser more distrustful and have it
reject challenges that do not conform to RFC-822 msg-id format
(CVE-2007-1558).
* Repoll immediately if a protocol error happens during the
authentication attempt after a failed opportunistic TLS upgrade
(#262450).
* Do not crash with a null pointer dereference when opening the
BSMTP file fails.
* Make BSMTP output actually work.
* Add delete-later and delete-later.README.
* Fix KPOP.
* Fix repoll when server disconnects after opportunistic TLS
failed for POP3.
* Documentation and string fixes.
-------------------------------------------------------------------
Fri Mar 30 02:22:36 CEST 2007 - ro@suse.de
- added pwdutils to buildreq
-------------------------------------------------------------------
Tue Feb 6 15:01:38 CET 2007 - sbrabec@suse.cz
- Repair repoll after opportunistic TLS failed (#223507#c27,
Berlios#10133).
- Use upstream fix of KPOP regression (#223507#c26).
-------------------------------------------------------------------
Thu Jan 25 15:57:47 CET 2007 - sbrabec@suse.cz
- Fixed regression in KPOP support (#223507#c8).
http://lists.berlios.de/pipermail/fetchmail-devel/2007-January/000857.html
-------------------------------------------------------------------
Wed Jan 24 16:32:55 CET 2007 - sbrabec@suse.cz
- Updated to version 6.3.6 (#223507):
* Password disclosure vulnerability fixed (CVE-2006-5867).
* Repairs a regression in 6.3.5 that crashes fetchmail when a
message with invalid headers is found while fetchmail's mda
option is in use (CVE-2006-5974).
* Repair --logfile, broken in 6.3.5.
* Repair --user, broken in 6.3.5.
* RPOP: used to log the password locally rather than an asterisk
as the other protocols do.
* POP3: Probes capabilities now when Kerberos V5 is enabled, so
that we can actually detect if the server supports it.
* DNS: Detect /etc/resolv.conf changes
* When HOME and FETCHMAILHOME are unset, be sure to copy user
database information.
- Spec file cleanup.
-------------------------------------------------------------------
Wed Oct 25 19:36:22 CEST 2006 - sbrabec@suse.cz
- Fixed problems caused by calling daemon as non-root (#207305).
-------------------------------------------------------------------
Mon Oct 23 17:07:33 CEST 2006 - sbrabec@suse.cz
- Updated to version 6.3.5:
* Bug fixes.
* Translation updates.
* Logging behavior changes.
* fetchmail now supports foo@example.org=bar user mappings for
multidrop boxes.
* Bouncing improvements.
* Improved IMAP and SDPS behavior.
* See NEWS for deprecated features and major incompatible change
advance warnings.
-------------------------------------------------------------------
Sat Oct 21 15:01:29 CEST 2006 - schwab@suse.de
- Run automake.
-------------------------------------------------------------------
Thu Jun 1 16:43:40 CEST 2006 - sbrabec@suse.cz
- By default run as non-root user fetchmail (159764#c1).
- Implemented "oneshot" in the init script (159764#c8).
-------------------------------------------------------------------
Mon Apr 3 17:09:42 CEST 2006 - sbrabec@suse.cz
- Backported fixes for two crashes (159764#c9, 159764#c10).
-------------------------------------------------------------------
Wed Jan 25 21:35:51 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Mon Jan 23 12:49:11 CET 2006 - sbrabec@suse.cz
- Updated to version 6.3.2 (fixes CVE-2006-0321).
-------------------------------------------------------------------
Tue Jan 10 17:01:49 CET 2006 - sbrabec@suse.cz
- Updated to version 6.3.1 (fixes #140475).
-------------------------------------------------------------------
Mon Dec 5 20:07:59 CET 2005 - sbrabec@suse.cz
- Updated to version 6.3.0 (fixes #131232).
-------------------------------------------------------------------
Wed Jul 27 19:21:35 CEST 2005 - sbrabec@suse.cz
- Updated to version 6.2.5.2 (#97555).
-------------------------------------------------------------------
Mon Apr 25 17:13:23 CEST 2005 - sbrabec@suse.cz
- Prevent lost mails with NULL envelope (#80331).
-------------------------------------------------------------------
Thu Feb 3 01:46:25 CET 2005 - ro@suse.de
- fix build on older distributions
-------------------------------------------------------------------
Wed Jan 19 17:02:11 CET 2005 - sbrabec@suse.cz
- Turned on GSSAPI, SOCKS and RSAREF support.
- Fixed implicit declaration and random result warnings.
-------------------------------------------------------------------
Fri Sep 24 15:25:30 CEST 2004 - sbrabec@suse.cz
- Added more sysconfig options for init script.
-------------------------------------------------------------------
Thu Sep 16 14:31:43 CEST 2004 - aj@suse.de
- Remove wrong definition.
-------------------------------------------------------------------
Tue Aug 31 13:41:00 CEST 2004 - sbrabec@suse.cz
- Added sendmail to Required-Start/Stop (#44500).
-------------------------------------------------------------------
Wed May 05 13:21:08 CEST 2004 - sbrabec@suse.cz
- Added sysconfig variable for polling interval (#39777).
- Init script adapted to conform latest LSB.
-------------------------------------------------------------------
Tue Apr 27 01:26:21 CEST 2004 - ro@suse.de
- fix missing return value in pop2.c
-------------------------------------------------------------------
Tue Mar 30 12:35:25 CEST 2004 - sbrabec@suse.cz
- Added /etc/fetchmailrc to file list.
-------------------------------------------------------------------
Thu Mar 25 18:43:11 CET 2004 - mmj@suse.de
- Add postfix to # neededforbuild
-------------------------------------------------------------------
Wed Mar 10 14:20:07 CET 2004 - sbrabec@suse.cz
- Set fetchsizelimit for APOP and RPOP (bug #35555).
http://lists.ccil.org/pipermail/fetchmail-friends/2003-October/003958.html
-------------------------------------------------------------------
Wed Feb 04 17:13:20 CET 2004 - sbrabec@suse.cz
- Updated to version 6.2.5.
-------------------------------------------------------------------
Sat Jan 10 16:55:44 CET 2004 - adrian@suse.de
- add %defattr
-------------------------------------------------------------------
Thu Oct 23 14:27:10 CEST 2003 - kukuk@suse.de
- Remove wrong requires
-------------------------------------------------------------------
Thu Aug 07 15:41:46 CEST 2003 - sbrabec@suse.cz
- Updated to version 6.2.3.
-------------------------------------------------------------------
Tue May 20 11:52:16 CEST 2003 - mmj@suse.de
- Fix typo
-------------------------------------------------------------------
Wed Mar 26 15:58:20 CET 2003 - sbrabec@suse.cz
- Updated to version 6.2.2.
- Created startup script.
-------------------------------------------------------------------
Thu Jan 16 11:38:02 CET 2003 - sbrabec@suse.cz
- Updated to version 6.2.1.
-------------------------------------------------------------------
Fri Dec 13 19:50:23 CET 2002 - mmj@suse.de
- Update to 6.2.0 which has security fix for rfc822.c and some
translations plus an SMTP timeout patch
-------------------------------------------------------------------
Tue Dec 10 19:09:32 CET 2002 - sbrabec@suse.cz
- Updated to version 6.1.3.
-------------------------------------------------------------------
Wed Nov 20 14:32:34 CET 2002 - sbrabec@suse.cz
- Spec file cleanup (bug #21912).
-------------------------------------------------------------------
Thu Oct 24 18:47:33 CEST 2002 - sbrabec@suse.cz
- Update to version 6.1.1.
-------------------------------------------------------------------
Tue Oct 01 18:39:16 CEST 2002 - sbrabec@suse.cz
- Removed --with-included-gettext and re-enabled NLS.
- OPIE/OTP fixes.
- Spec file cleanup.
-------------------------------------------------------------------
Fri Sep 27 10:38:05 CEST 2002 - mmj@suse.de
- Update to 6.1.0 including since 5.9.13:
o Support for STARTTLS over IMAP
o Cleanups and bugfixes
o Translation update
o Fix for potential remote vulnerability in multidrop mode,
which according to the author is an important security fix.
-------------------------------------------------------------------
Mon Jul 29 19:56:29 CEST 2002 - jreuter@suse.de
- more spec file cleanup
-------------------------------------------------------------------
Mon Jul 29 17:19:19 CEST 2002 - jreuter@suse.de
- added /etc/logrotate.d/fetchmail (Bugzilla #17279)
- spec file cleanup
-------------------------------------------------------------------
Fri Jul 19 19:58:31 CEST 2002 - jreuter@suse.de
- removed /usr/share/locale/*/LC_MESSAGES/fetchmail.mo from file list
-------------------------------------------------------------------
Wed Jul 17 13:18:49 CEST 2002 - jreuter@suse.de
- updated to version 5.9.13
- disabled NLS support because it doesn't compile and esr is about
to remove it anyway
- complete changelog: http://tuxedo.org/~esr/fetchmail/NEWS
-------------------------------------------------------------------
Sat Mar 23 15:51:48 CET 2002 - kukuk@suse.de
- Fix fetchmailconf (wrong python widget destroy calls) [Bug #15391]
-------------------------------------------------------------------
Mon Sep 17 15:49:17 CEST 2001 - bjacke@suse.de
- minor fixes in README.SUSE
-------------------------------------------------------------------
Thu Aug 16 23:07:12 CEST 2001 - bjacke@suse.de
- update to 5.9.0
-------------------------------------------------------------------
Thu Jul 12 16:51:45 CEST 2001 - bjacke@suse.de
- update to 5.8.14
-------------------------------------------------------------------
Fri Jun 15 01:12:08 CEST 2001 - bjacke@suse.de
- patch to prevent buffer overflow due to long headers
-------------------------------------------------------------------
Tue Apr 3 13:07:18 CEST 2001 - bjacke@suse.de
- update to 5.8.0
-------------------------------------------------------------------
Thu Mar 22 18:51:02 CET 2001 - ro@suse.de
- added split-aliases as provides
-------------------------------------------------------------------
Wed Feb 14 12:36:44 CET 2001 - bjacke@suse.de
- updated to 5.6.5 (fixes #6245)
- fix fetchmailconf nospambounce problem
- enable RPA protocol
-------------------------------------------------------------------
Fri Jan 5 16:30:40 CET 2001 - bjacke@suse.de
- disabled IPv6 support for the time being to fix bug #5111
-------------------------------------------------------------------
Wed Dec 20 16:37:10 CET 2000 - garloff@suse.de
- pass --enable-NTLM to configure in order to enable M$ Exchange
compatible auth proto
- explicitly specify the directories with --mandir etc ...
- Use DESTDIR= instead of prefix to pass RPM_BUILD_ROOT
- add %{?suse_update_config}
-------------------------------------------------------------------
Mon Dec 18 15:25:28 CET 2000 - bjacke@suse.de
- some spec file fixes
-------------------------------------------------------------------
Mon Dec 18 14:25:01 CET 2000 - ro@suse.de
- Fix requires for fetchmailconf (again)
-------------------------------------------------------------------
Mon Dec 18 13:14:36 CET 2000 - bjacke@suse.de
- merged ssl stuff from fetchmailssl to fetchmail package
-------------------------------------------------------------------
Wed Nov 29 10:53:39 CET 2000 - bjacke@suse.de
- updated to 5.6.0
- adjust README to new boot concept
-------------------------------------------------------------------
Fri Nov 10 22:04:35 CET 2000 - bjacke@suse.de
- updated to version 5.5.5
- switched to long names
- added README.SuSE
-------------------------------------------------------------------
Sun Sep 3 14:57:40 CEST 2000 - bjacke@suse.de
- update to fetchmail-5.5.1
-------------------------------------------------------------------
Tue May 23 14:14:35 CEST 2000 - bk@suse.de
- moved fetchmailconf man page to subpackage fetchmcf
-------------------------------------------------------------------
Mon May 15 10:40:20 CEST 2000 - bk@suse.de
- update to fetchmail-5.4.0, new major version.
-------------------------------------------------------------------
Wed Mar 1 18:22:35 CET 2000 - werner@suse.de
- Fix config.guess selection
-------------------------------------------------------------------
Thu Feb 24 15:24:19 CET 2000 - dipa@suse.de
- update to fetchmail-5.3. update to fetchmail-5.3.00
-------------------------------------------------------------------
Tue Feb 15 03:36:31 CET 2000 - bk@suse.de
- update to fetchmail-5.2.8, that's the code freeze release for 5.3.0
-------------------------------------------------------------------
Tue Feb 8 02:53:41 CET 2000 - bk@suse.de
- update to fetchmail-5.2.7, Eric's changelog to 5.2.6 is very small:
* Updated FAQ and
* Updated es.po.
* Disable mail notification on server unreachable. This turned out to
be a very bad idea.
-------------------------------------------------------------------
Tue Feb 1 09:23:01 CET 2000 - ro@suse.de
- specfile typo
-------------------------------------------------------------------
Tue Feb 1 00:36:53 CET 2000 - ro@suse.de
- create man directory
-------------------------------------------------------------------
Mon Jan 31 19:39:32 CET 2000 - bk@suse.de
- restarted spec from package-provided spec, subpackages fetchmcf (fetchmailconf)
-------------------------------------------------------------------
Wed Oct 20 20:31:14 CEST 1999 - bk@suse.de
- split-off from pop, update to 5.1.2
