- Linux 4.2.3.
- commit f17d4c9

- config: armv7hl: Enable missing STMMAC Ethernet options
  This attempts to fix regressions from 4.1 like built-in Ethernet on
  Cubietruck not working.
  (cherry picked from commit 68608454650632c84ab3c4c67a923ba834be6c59)
- commit 2a10792

- Obsolete kernel-desktop also in Tumbleweed
- commit 35c44c6

- apparmor: temporary work around for bug while unloading policy
  (boo#941867).
- commit 1193b90

- Update config files. (bsc#947816)
  Put # CONFIG_KEXEC_VERIFY_SIG is not set (bsc#947816)
- commit 0dc8788

- Update config files.
  (vanilla)
- commit b3ecf72

- Linux 4.2.2 (bnc#934531).
- Delete
  patches.fixes/mmc-sdhci-fix-dma-memory-leak-in-sdhci_pre_req.patch.
- Delete
  patches.fixes/workqueue-Make-flush_workqueue-available-again-to-no.patch.
- Update config files.

• Files Changed
• Browse Source

- Update config files kk*top
- commit afeb793

- Update config files.
- Refresh patches.suse/stack-unwind.
- Refresh patches.xen/xen3-patch-2.6.27.
  Reenable dwarf stack unwinder for C. Assembler is not dwarf-friendly
  annotated (removed in upstream and neither
  patches.arch/x86_64-unwind-annotations is enabled (yet)), so dwarf
  unwinder does not work there (yet).
  This should be fixed by Josh Poimbeouf's stacktool later. But until
  then, dwarf-unwind at least C and use frame pointers for asm.
  I.e. no more question marks for most cases:
   [<ffffffff81008415>] try_stack_unwind+0x175/0x190
   [<ffffffff81007293>] dump_trace+0x93/0x3a0
   [<ffffffff8100847b>] show_trace_log_lvl+0x4b/0x60
   [<ffffffff810076ac>] show_stack_log_lvl+0x10c/0x180
   [<ffffffff81008515>] show_stack+0x25/0x50
   [<ffffffff81364619>] dump_stack+0x4b/0x72
   [<ffffffffa01a302e>] init1+0xe/0x20 [aaa]
   [<ffffffff810002f3>] do_one_initcall+0xb3/0x200
   [<ffffffff8116e4da>] do_init_module+0x5f/0x1f6
   [<ffffffff810ee87e>] load_module+0x15fe/0x1b60
   [<ffffffff810eefe8>] SYSC_finit_module+0x98/0xc0
   [<ffffffff810ef02e>] SyS_finit_module+0xe/0x10
   [<ffffffff816b07b6>] entry_SYSCALL_64_fastpath+0x16/0x75
  DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x16/0x75
  Leftover inexact backtrace:
  <nothing>
  Instead of the funny:

• Files Changed
• Browse Source

- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3
- commit 0c88332
- commit 1f861a6
- commit 0959156
- commit 057f0a3

• Files Changed
• Browse Source

- Update config files kk*top
- commit 9ef0376

- Update Xen patches to 4.2-final.
- commit 7b8109d

- Refresh
  patches.apparmor/apparmor-compatibility-patch-for-v5-network-control.
  Fix this:
  patches.apparmor/apparmor-compatibility-patch-for-v5-network-control:25:
  error: Timestamp after filename
  by scripts/refresh_patch.sh.
- commit 2089c9a

- Refresh
  patches.fixes/btrfs-fix-stale-dir-entries-after-unlink-inode-eviction-and-fsync.
  Fix this:
  missing header for unified diff at line 107 of patch
  (Patch is indented 4 spaces.)
  can't find file to patch at input line 107
  by commenting also the @@ sign.
- commit 8e48b46

- Update to 4.2-final.
- commit c617119

- Refresh
  patches.fixes/mmc-sdhci-fix-dma-memory-leak-in-sdhci_pre_req.patch.
  Hmm, mmc_data does not have sg_count yet. Fix it.
- commit d867e86

• Files Changed
• Browse Source

- config: enable IPV6_SIT_6RD on all flavors
  The option was initially disabled because it was labeled experimental.
- commit 83fbd4e

- Linux 4.1.5.
- Refresh patches.xen/xen-x86-EFI.
- commit efe368a

- Update
  patches.suse/0001-Revert-mmc-sdhci-fix-low-memory-corruption.patch
  (bnc#934531).
- Update
  patches.suse/0002-Revert-mmc-sdhci-use-pipeline-mmc-requests-to-improv.patch
  (bnc#934531).
- commit 3081bf0

- Linux 4.1.4 (CVE-2015-1333 bnc#938645 boo#939394).
- Refresh patches.xen/pci-guestdev.
- Delete
  patches.arch/arm64-Don-t-report-clear-pmds-and-puds-as-huge.patch.
- Delete
  patches.drivers/ideapad_laptop-lenovo-g50-30-fix-rfkill-reports-wireless-blocked.
- Delete
  patches.fixes/KEYS-ensure-we-free-the-assoc-array-edit-if-edit-is-.patch.
- commit a37e14f

- Refresh
  patches.fixes/KEYS-ensure-we-free-the-assoc-array-edit-if-edit-is-.patch.
  Ad git commit id.
- commit 7cf8f32

• Files Changed
• Browse Source

- Update config files kk*top
- commit 1f861a6

- Update config files.
  Update config files for vanilla ppc64 and ppc64le.
  Fixes boo#939502
- commit 0fd34b1

- ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless
  blocked (boo#939394).
- commit f45c09a

- Btrfs: fix hang during inode eviction due to concurrent
  readahead (bnc#937403).
- commit 9ec57fb

- Update config files.
  Disable HIBERNATION on power due to invalid code generation (bsc#938934)
- commit 2b9aa48

- Linux 4.1.3.
- Refresh patches.xen/pci-guestdev.
- Refresh patches.xen/xen3-patch-2.6.25.
- Update config files.
- commit 33413c9

- Update config files.
  Disable Xen on ARM64 default configs, should only be enabled
  on the pv flavor (which does not yet exist for ARM64)
- commit eea4145

• Files Changed
• Browse Source

- arm64: Don't report clear pmds and puds as huge.
- commit cac28b3

- Linux 4.1.1.
- commit ab48011

- Refresh
  patches.fixes/drm-i915-Ensure-cache-flushes-prior-to-doing-CS-flip.patch.
- Refresh patches.fixes/mmc-sdhci-fix-low-memory-corruption.patch.
  Update upstream statuses.
- commit 11b8ced

- drm/i915: Ensure cache flushes prior to doing CS flips
  (bnc#931300).
- commit 406255f

- arm64: Don't report clear pmds and puds as huge.
- commit cac28b3

- Linux 4.1.1.
- commit ab48011

- Refresh
  patches.fixes/drm-i915-Ensure-cache-flushes-prior-to-doing-CS-flip.patch.
- Refresh patches.fixes/mmc-sdhci-fix-low-memory-corruption.patch.
  Update upstream statuses.
- commit 11b8ced

- drm/i915: Ensure cache flushes prior to doing CS flips
  (bnc#931300).

• Files Changed
• Browse Source

- Update config files kk*top
- commit 040fd87

- ARM64: config: UNWIND_INFO=y
- commit 8193a68

- Update Xen patches to 4.1-final and c/s 1289.
- guarantee M2P to be invisible to user mode.
- commit fc59188

- NFSv4: When returning a delegation, don't reclaim an incompatible open mode (bnc#934202).
- commit 6c74958

- Update to 4.1-final.
- commit d6cfe1f

- x86/PCI: Use host bridge _CRS info on systems with >32 bit
  addressing (bnc#907092).
- x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
  (bnc#907092).
- x86/PCI: Use host bridge _CRS info on systems with >32 bit
  addressing (bnc#907092).
- x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
  (bnc#907092).
- commit 1d9da2e

- Btrfs: fix regression in raid level conversion.
- Btrfs: fix uninit variable in clone ioctl.
- Btrfs: fix range cloning when same inode used as source and
  destination.

• Files Changed
• Browse Source

- Linux 4.0.5 (bnc#927786 bnc#931580).
- Refresh
  patches.fixes/btrfs-revert-delete-chunk-allocation.patch.
- Delete patches.fixes/drm-radeon-retry-dcpd-fetch.patch.
- Delete patches.fixes/rtlwifi-rtl8192cu-Fix-kernel-deadlock.
- commit f4cd21b

- Linux 4.0.5 (bnc#927786 bnc#931580).
- Refresh
  patches.fixes/btrfs-revert-delete-chunk-allocation.patch.
- Delete patches.fixes/drm-radeon-retry-dcpd-fetch.patch.
- Delete patches.fixes/rtlwifi-rtl8192cu-Fix-kernel-deadlock.
- commit f4cd21b

- Linux 4.0.5 (bnc#927786 bnc#931580).
- Refresh
  patches.fixes/btrfs-revert-delete-chunk-allocation.patch.
- Delete patches.fixes/drm-radeon-retry-dcpd-fetch.patch.
- Delete patches.fixes/rtlwifi-rtl8192cu-Fix-kernel-deadlock.
- commit f4cd21b

- Linux 4.0.5 (bnc#927786 bnc#931580).
- Refresh
  patches.fixes/btrfs-revert-delete-chunk-allocation.patch.
- Delete patches.fixes/drm-radeon-retry-dcpd-fetch.patch.
- Delete patches.fixes/rtlwifi-rtl8192cu-Fix-kernel-deadlock.
- commit f4cd21b

- Linux 4.0.5 (bnc#927786 bnc#931580).
- Refresh

• Files Changed
• Browse Source

- rtlwifi: rtl8192cu: Fix kernel deadlock (bnc#927786).
- commit ac67377

- drm/radeon: retry dcpd fetch (bnc#931580).
- commit ad54361

- drm/nouveau/bios: fix fetching from acpi on certain systems
  (boo#932184).
- commit e14fcc2

- Revert "btrfs: delete chunk allocation attemp when setting block group ro".
  High user impact, should land in 4.1.
- commit 4f5e0d5

- Update config files.
  Unset PKCS7_TEST_KEY, so that SYSTEM_TRUSTED_KEYRING can stay
  disabled. I.e. make it the same as on other configs/arches.
- commit 6355689

- Linux 4.0.4.
- Revert "xen/xenbus: Update xenbus event channel on resume".
- commit 383ecdf

- rtlwifi: rtl8192cu: Fix kernel deadlock (bnc#927786).
- commit ac67377

- drm/radeon: retry dcpd fetch (bnc#931580).
- commit ad54361

- drm/nouveau/bios: fix fetching from acpi on certain systems

• Files Changed
• Browse Source

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

- Linux 4.0.3.
- commit 3ee3773

• Files Changed
• Browse Source

- Linux 4.0.2 (boo#905088).
- Refresh patches.xen/xen-x86_64-vread-pvclock.
- Refresh patches.xen/xen3-patch-3.11.
- Delete
  patches.fixes/btrfs-fix-inode-eviction-infinite-loop-after-cloning.patch.
- Update config files.
  CONFIG_ARM64_ERRATUM_845719=y, the same as master.
- commit a425d38

- Linux 4.0.2 (boo#905088).
- Refresh patches.xen/xen-x86_64-vread-pvclock.
- Refresh patches.xen/xen3-patch-3.11.
- Delete
  patches.fixes/btrfs-fix-inode-eviction-infinite-loop-after-cloning.patch.
- Update config files.
  CONFIG_ARM64_ERRATUM_845719=y, the same as master.
- commit a425d38

- Linux 4.0.2 (boo#905088).
- Refresh patches.xen/xen-x86_64-vread-pvclock.
- Refresh patches.xen/xen3-patch-3.11.
- Delete
  patches.fixes/btrfs-fix-inode-eviction-infinite-loop-after-cloning.patch.
- Update config files.
  CONFIG_ARM64_ERRATUM_845719=y, the same as master.
- commit a425d38

- Linux 4.0.2 (boo#905088).
- Refresh patches.xen/xen-x86_64-vread-pvclock.
- Refresh patches.xen/xen3-patch-3.11.

• Files Changed
• Browse Source

- Linux 4.0.1.
- commit b77e339

- ftrace/x86/xen: use kernel identity mapping only when really needed
  (bsc#873195, bsc#886272, bsc#903727, bsc#927725)
- commit 63ed720

- scripts/refresh: Obsoleted by refresh_patch.sh
- commit d1dd729

- rpm/kernel-obs-build.spec.in: Add .build.hostarch.kvm to the filelist
- commit c65f3ca

- Update Xen patches to 4.0-final.
- commit eee4e07

- rpm/mkspec: Do not build kernel-obs-* on 32bit ppc
  The buildservice uses the ppc64 kernel-obs-build package for 32bit
  workers.
- commit d1e0beb

- create .build.hostarch.kvm for kernel-obs-build
  OBS needs to know hostarch, with ppc64/ppc64le this is not that easy.
  Lets create a marker file to help with it.
  See obs-build commit: e47399d738e51
- commit e5d9da9
- commit 9a27fc1
- commit 3ccdab2

- Linux 4.0.1.

• Files Changed
• Browse Source

- Update config files kk*top.
- commit 364c6ff

- rpm/kernel-obs-qa.spec.in: Do not fail if the kernel versions do not match
- commit 28e9e74

- Update config files. (boo#925479)
  Do not set CONFIG_SYSTEM_TRUSTED_KEYRING until we need it in future
  openSUSE version:
  e.g. MODULE_SIG, IMA, PKCS7(new), KEXEC_BZIMAGE_VERIFY_SIG(new)
- commit 5c4d917

- Update config files. (boo#925479)
  Do not set CONFIG_SYSTEM_TRUSTED_KEYRING until we need it in future
  openSUSE version:
  e.g. MODULE_SIG, IMA, PKCS7(new), KEXEC_BZIMAGE_VERIFY_SIG(new)
- commit 74c332b

- Update to 4.0-final.
- commit 6dbc1a6
- Update to 4.0-rc7.
- Config changes:
  - x86_64/pv:
    - CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512 (default)
- commit 1925449

- of: Fix size when dma-range is not used.
- of: Move of_dma_configure() to device.c to help re-use.
- of: iommu: Add ptr to OF node arg to of_iommu_configure().
- PCI: Add helper functions pci_get[put]_host_bridge_device().

• Files Changed
• Browse Source

- Linux 3.19.4.
- commit 51ddeac

- Btrfs: fix inode eviction infinite loop after cloning into it.
- commit 0f5134a

- btrfs: simplify insert_orphan_item (boo#926385).
- commit 6d5e057

- drm: Fixup racy refcounting in plane_force_disable (boo#925946).
- commit 7c1f29a

- ARMv6: config: Reenable DWC2 host support
  We need the USB host controller support in order to have
  network on the Raspberry Pi, as the network is connected
  via USB.
- commit a30f81d

- ARMv6: config: Cleanup default config
  Previous updates enabled config options that do not make sense
  on ARMv6. ARMv6 default flavor is actually just a RPi1 kernel,
  so enabling platform support for hardware that is unavailable there
  and that conflicts with the Rpi drivers should not be done.
  This causes the kernel to boot again on a Rpi1.
- commit b5dbf85

- Linux 3.19.4.
- commit 51ddeac

- Btrfs: fix inode eviction infinite loop after cloning into it.

• Files Changed
• Browse Source

- Linux 3.19.3 (bsc#921313).
- Refresh patches.xen/xen3-patch-3.1.
- Delete
  patches.arch/x86-vdso-fix-a-reference-to-a-non-existing-instructi.patch.
- Delete
  patches.drivers/ALSA-hda-Fix-regression-of-HD-audio-controller-fallb.patch.
- commit f10e7fc

- config: disable SCSI_MQ_DEFAULT on all architectures and configs
  The scsi-mq feature lacks support for io schedulers right now. This
  exhibits as performance drop for random RW workloads due to excessive
  seeking. The real benefit of scsi-mq comes with high-end and fast
  devices, the estimated impact on our users is low.
- commit d8856ce

- ARM64: Fix support for ARMv7 userspace
- commit 6c3d33f

- Linux 3.19.3 (bsc#921313).
- Refresh patches.xen/xen3-patch-3.1.
- Delete
  patches.arch/x86-vdso-fix-a-reference-to-a-non-existing-instructi.patch.
- Delete
  patches.drivers/ALSA-hda-Fix-regression-of-HD-audio-controller-fallb.patch.
- commit f10e7fc

- config: disable SCSI_MQ_DEFAULT on all architectures and configs
  The scsi-mq feature lacks support for io schedulers right now. This
  exhibits as performance drop for random RW workloads due to excessive
  seeking. The real benefit of scsi-mq comes with high-end and fast

• Files Changed
• Browse Source

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

- Linux 3.19.2.
- commit f2f9797

• Files Changed
• Browse Source

- ALSA: hda - Fix regression of HD-audio controller fallback modes
  (bsc#921313).
- commit c0946e9

- Linux 3.19.1.
- Refresh patches.xen/xen-x86-bzImage.
- commit a04cebc

- x86/vdso: fix a reference to a non-existing instruction.
- commit 748552c

- config: armv6hl: Update and re-enable armv6 default config
  Please find an update from 3.18.0 to 3.19.0 for armv6 default config.
  It also enables armv6 default config again.
  [AF: Homogenized module selection, dropped Broadcom Kona support (ARMv7)]
  (cherry picked from commit 860fc5cd0552cd001cbb4ed0edbb9634748ae0eb)
- config: armv6hl: Update and re-enable armv6 default config
  Please find an update from 3.18.0 to 3.19.0 for armv6 default config.
  It also enables armv6 default config again.
  [AF: Homogenized module selection, dropped Broadcom Kona support (ARMv7)]
- commit f85c84c
- config: armv7hl: Temporarily disable CONFIG_PCIE_SPEAR13XX
  spear13xx pcie leads to kernel oopses in random places,
  so lets disable it until a proper solution to fix it is found.
  References: bko#92581

- Update config files: disable CONFIG_I2C_SLAVE
  Disable CONFIG_I2C_SLAVE on x86 and ppc*. There is currently no known
  use case for this feature on these architectures, and it has a small
  build time and size cost.

• Files Changed
• Browse Source

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module
- commit e4a7dc7

- Update config files kk*top
   - enable LZ4 compression with zswap by having it in kernel instead of module

• Files Changed
• Browse Source

- Update config files kk*top
  - Enable CONFIG_FRONTSWAP CONFIG_ZSWAP CONFIG_ZBUD
- commit b1cd348

- config: armv7hl: Temporarily disable CONFIG_PCIE_SPEAR13XX
  spear13xx pcie leads to kernel oopses in random places,
  so let's disable it until a proper solution to fix it is found.
  References: bko#92581
  (cherry picked from commit a26077781b14f8b6c48517927216eb5b923de54d)
- commit 1133f88

- Update config files kk*top
  - Enable CONFIG_FRONTSWAP CONFIG_ZSWAP CONFIG_ZBUD
- commit b1cd348

- config: armv7hl: Temporarily disable CONFIG_PCIE_SPEAR13XX
  spear13xx pcie leads to kernel oopses in random places,
  so let's disable it until a proper solution to fix it is found.
  References: bko#92581
  (cherry picked from commit a26077781b14f8b6c48517927216eb5b923de54d)
- commit 1133f88

- Update config files kk*top
  - Enable CONFIG_FRONTSWAP CONFIG_ZSWAP CONFIG_ZBUD
- commit b1cd348

- config: armv7hl: Temporarily disable CONFIG_PCIE_SPEAR13XX
  spear13xx pcie leads to kernel oopses in random places,
  so let's disable it until a proper solution to fix it is found.
  References: bko#92581

• Files Changed
• Browse Source