File transactional-update.changes of Package transactional-update

-------------------------------------------------------------------
Tue May  7 14:25:07 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Version 4.6.8
  - tukit: Properly handle overlay syncing failures: If the system
    would not be rebooted and several snapshots accumulated in the
    meantime, it was possible that the previous base snapshot -
    required for /etc syncing - was deleted already. In that case
    changes in /etc might have been reset.
    [gh#openSUSE/transactional-update#116]
    [gh#kube-hetzner/terraform-hcloud-kube-hetzner#1287]
  - soft-reboot: Log requested reboot type
  - soft-reboot: Don't force hard reboot on version change only

-------------------------------------------------------------------
Tue Apr 30 13:09:04 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Version 4.6.7
  - Add support for snapper 0.11.0; also significantly decreases
    cleanup time [boo#1223504]

-------------------------------------------------------------------
Thu Apr 18 14:53:17 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Version 4.6.6  
  - soft-reboot: Fix inverted logic of soft-reboot detection
  - soft-reboot: Don't use D-Bus for snapper call - it may be
    shutting down already
  - soft-reboot: Remove unused variable
  - doc: Document configuration file snippets for tukit.conf
- Remove script to disable soft-reboot support - this is the
  default for now anyway

-------------------------------------------------------------------
Fri Apr 12 15:36:13 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Version 4.6.5
  - Rework soft-reboot support introduced in 4.6.0:
    - On transactional systems with systemd 254 the system could
      hang with with a soft-reboot, as /var and /etc have to be
      mounted in /run/nextroot explicitly. As a soft-reboot can
      also be triggered by an admin the mounting of the
      corresponding mount points was moved to a systemd service to
      be independent of t-u itself.
    - Support for systemd 255
    - Don't decrease reboot level on multiple commands
    - Various other bugfixes
    - soft-reboot support is disabled by default now to gather more feedback
  - libtukit: Fix kexec reboot method to boot kernel / initrd of next snapshot
  - tukit: Don't clone lock file handle on exec [boo#1222411]
  - t-u: Always use zypper of installed system [bsc#1221346]
  - t-u: Remove remaining telemetrics references
- Add prepare-nextroot-for-softreboot service
- Add (empty) %check section

-------------------------------------------------------------------
Tue Mar 12 17:12:33 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Disable soft-reboot support for now as long as it isn't working
  reliably
- Move tukit.conf to correct package

-------------------------------------------------------------------
Mon Mar  4 14:55:53 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Version 4.6.0
  - tukit / t-u: Implement support for systemd soft-reboot, but
    needs package manager support (provided by zypp-boot-plugin on
    openSUSE) to determine which kind of reboot is required; the
    minimally required reboot method (soft-reboot, kexec, full
    reboot) will be used automatically if enabled (see tukit.conf).
    This deprecates the "kexec" reboot method in favor of automatic
    selection.
  - tukit: Determine D-Bus availability via system socket instead
    of brute force
  - tukit: Don't ignore return status of snapper - plugins can
    return an error code now where tukit has to fail [gh##118] /
    [poo#127169]
  - tukit: Remove BTRFS dependencies in snapper backend, user
    snapper for for everything directly. In theory this should
    support further file systems such as bcachefs if they follow
    the same layout (untested).
  - t-u: Add safety net before deleting overlays [boo#1217416]
  - t-u: Remove telemetry support, the required packages haven't
    been in the repository for quite some time as they were
    abandoned upstream.
  - doc: Document option to use names in BINDDIRS array
  - doc: Mention tukit.conf in t-u man page
  - doc: Link Reboot.hpp as an officially supported API on the
    main page
  - Code cleanup

-------------------------------------------------------------------
Thu Jan 18 16:19:41 UTC 2024 - Ignaz Forster <iforster@suse.com>

- Use "up" instead of "dup" by default on ALP [bsc#1218861]

-------------------------------------------------------------------
Mon Nov 20 17:12:20 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.5.0
  - libtukit: Use permissions of real /etc when creating overlay
    [bsc#1215878]
  - libtukit, tukit: Support "rollback" via library now
  - tukitd: Implement Snapshot delete and rollback methods
  - tukit: Check for missing arguments with "close" and "abort"
    commands
  - t-u: Warn user when using "kdump" if it isn't configured to
    avoid confusion with "setup-kdump" [boo#1215725]
  - t-u: Abort if mkdumprd run is not successful
  - t-u: Use defaut from config file if t-u is called without
    arguments [gh#openSUSE/transactional-update#101]
  - Improved README.md [gh#openSUSE/transactional-update#59] and
    API docs
  - Code cleanup

-------------------------------------------------------------------
Mon Sep 11 13:55:40 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.4.0
  - t-u: Introduce setup-fips command [jsc#SMO-194]
  - libtukit: Always set a cleanup algorithm for snapshots - when
    using API, D-Bus interface or tukit the snapshots will be
    automatically cleaned up by snapper after some time now; in the
    past only snapshots created by the transactional-update shell
    script would be cleanup after, and only after a `t-u cleanup`
    run. [gh#openSUSE/transactional-update#62]
  - tukit: enable kexec's syscall detection feature
  - tukit: Don't throw exceptions from the child process after fork
  - tukitd: Rename service file to org.opensuse.tukit.service
  - tukitd: Allow querying DBus Properties [boo#1214707]
  - t-u: Add support for fully written-out update commands
  - t-u: Improve detection of existing kernel parameters

-------------------------------------------------------------------
Wed Jun 28 15:01:34 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.3.0
  - Replace custom tu-rebuild-kdump-initrd with call to mkdumprd
    [gh#openSUSE/transactional-update#107].
  - Add support for libmount 2.39. The behaviour change was not
    intended and will be changed in 2.39.1 (see
    [gh#util-linux/util-linux#2326], but it was easy to fix it
    anyway.
  - Honor LIBMOUNT_DEBUG variable for additional output.

-------------------------------------------------------------------
Mon May  8 17:38:24 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.2.1
  - Implement "apply" command to switch into new snapshot directly
    [jsc#PED-3912]
  - Use new snapper functionality to set default snapshot - this
    makes it possible to execute hooks as requested in
    [poo#127160], [gh#openSUSE/transactional-update#85] and
    [gh#openSUSE/transactional-update#105].
  - Don't hardcode GRUB2 [gh#openSUSE/transactional-update#100] /
    [poo#127154]
  - Fix cleanup handler
  - Fix unmounting temporary mounts
  - Prevent loosing track of snapshots in certain rollback
    scenarios - these would not be marked for deletion otherwise
  - Document "notify" reboot method
- Minimal required snapper version is 0.8.10 now, for the new
  snapper functionality there is a backwards compatibility layer.
- Conflict with health-checker < 1.8 - the "good" snapshot
  detection of GRUB cannot rely on transactional-update any more
  due to the new apply command
- Depend on usrmerge for apply command

-------------------------------------------------------------------
Thu Mar 23 11:52:21 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.1.5
  - Add support for configuration file snippets

-------------------------------------------------------------------
Fri Mar 10 14:05:37 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.1.4
  - Workaround for broken Tumbleweed package libfdisk1

-------------------------------------------------------------------
Wed Feb  8 15:14:26 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.1.3
  - Suppress SELinux relabelling output in quiet mode
  - Documentation readability improvements

-------------------------------------------------------------------
Mon Jan 23 13:54:11 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.1.2
  - Don't try to mount user mounts if they don't exist [boo#1207366]

-------------------------------------------------------------------
Wed Jan 18 16:56:16 UTC 2023 - Ignaz Forster <iforster@suse.com>

- Version 4.1.1
  - Mount user specific binddirs last: Prevously the internal mounts would
    potentially overwrite user bind mounts [boo#1205011]
  - selinux: Relabel shadowed /var files during update to make sure they
    don't interfere with the update [boo#1205937]
  - Clean up /var/lib/overlay more aggressively [boo#1206947]
  - tukit: Merge /etc overlay into parent if --discard is used together
    with --continue - previously the files were incorrectly always merged
    with the currently running system
  - status: do not execute the status command if experimental
  - Don't delete created mount point dirs any more
  - Small code optimizations

-------------------------------------------------------------------
Fri Sep 30 12:39:17 UTC 2022 - Ignaz Forster <iforster@suse.com>

- Version 4.1.0
  - t-u: Add a "setup-kdump" command; implements [jsc#PED-1441]
  - Export TRANSACTIONAL_UPDATE_ROOT (the path to the snapshot) in
    the update environment; implements [jsc#PED-1078]
  - Add support for "notify" reboot method for desktop use
    [gh#openSUSE/transactional-update#93]
  - Fix kdump initrd recreation detection; the check was performed in the
    active snapshot instead of the target snapshot
  - Document register command [bsc#1202900]
  - Avoid unnecessary snapshots for register command [bsc#1202901]
  - Various optimizations for register command
  - Remove bogus error message when triggering reboot
  - Rework /etc overlay documentation in "The Transactional Update Guide"
  - Fix incorrect manpage formatting
  - Remove leftover "salt" reboot method in configuration example file
  - Replace deprecated std::mem_fn with lambdas

-------------------------------------------------------------------
Thu Sep  1 14:03:58 UTC 2022 - Stefan Schubert <schubi@suse.com>

- Migration of logrotate configuration to /usr/etc: Saving user
  changed configuration files in /etc and restoring them while
  an RPM update.

-------------------------------------------------------------------
Mon Aug 22 15:14:24 UTC 2022 - Fabian Vogt <fvogt@suse.com>

- Version 4.0.1
  - create_dirs_from_rpmdb: Just warn if no default SELinux context found
    [gh#openSUSE/transactional-update#88], [bsc#1188215]
  - create_dirs_from_rpmdb: Don't update the rpmdb cookie on failure
    [gh#openSUSE/transactional-update#88]
  - Handle directories owned by multiple packages
    [gh#openSUSE/transactional-update#90], [bsc#1188215]

-------------------------------------------------------------------
Tue Aug  2 14:32:35 UTC 2022 - Ignaz Forster <iforster@suse.com>

- Version 4.0.0
  - Last minute interface change: Changed "List" method of Snapshot D-Bus
    interface to return a map of properties instead of a comma separated
    list of strings; this will allow retrieving the snapshot properties
    even if they contain a comma in their value [boo#1202147]
  - Remove "Snapshot.hpp" as a public API for now - all public
    functionality is part of SnapshotManager.hpp
  - Add header file documentation for SnapshotManager.hpp
  - Add method to delete snapshot
    [gh#openSUSE/transactional-update#52]
  - Allow setting description of snapshot
    [gh#openSUSE/transactional-update#55]
  - create_dirs_from_rpmdb: set SELinux file context of missing directories
    [gh#openSUSE/transactional-update#84], [bsc#1197242]
  - Fix broken logrotate due to typo in config file
    [gh#openSUSE/transactional-update#87]
  - create_dirs_from_rpmdb: Fix handling return code of create_dirs()
    [gh#openSUSE/transactional-update#86]
  - Fix broken "shell" prompt after selfupdate
  - Add documented D-Bus interface definition files
  - Add tukit_sm_get_current and tukit_sm_get_default to C interface
  - Fixed typos

-------------------------------------------------------------------
Tue Jun 21 08:02:24 UTC 2022 - Stefan Schubert <schubi@suse.com>

- Moved logrotate files from user specific directory /etc/logrotate.d
  to vendor specific directory /usr/etc/logrotate.d.

-------------------------------------------------------------------
Tue May 17 07:59:57 UTC 2022 - Ignaz Forster <iforster@suse.com>

- Version 4.0.0~rc4
  - Fix building with GCC 12
  - Fix stack overflow with very long commands / ids [bsc#1196149]
  - Use separate mount namespace for chroot, allowing overwriting
    the bind mounts from the update environment - this could have
    lead to data loss of the bind mount previously
  - Fix C error and exception handling for snapshots

-------------------------------------------------------------------
Tue May  3 10:21:35 UTC 2022 - Ignaz Forster <iforster@suse.com>

- Version 4.0.0~rc3
  - Add Snapshot interface
  - Reworked signal handling: All public signals are sent from the
    main thread now, keeping the same sender for everything
  - Implement D-Bus call "Execute" for Transactions
  - Implement interface for listing Snapshots
  - Implement Reboot interface
  - Fix bug when using --continue on old snapshots
  - Fix hypothetical integer overflow in snapshot list [bsc#1196826]
  - Fix wrong sort order in status command
    [gh#openSUSE/transactional-update#80] 

-------------------------------------------------------------------
Sun Mar  6 17:46:14 UTC 2022 - Ignaz Forster <iforster@suse.com>

- Version 4.0.0~rc2
  - Fix missing prompt in "shell" command [bsc#1196580]
  - Add output of tukit commands to log file
  - Fix compilation error with GCC12 [boo#1194876]
  - Fixed (non-critical) security review comments [boo#1196149]
  - Fixed selfupdate
  - Code cleanup

-------------------------------------------------------------------
Fri Nov 22 18:05:54 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 4.0.0~rc1
  This release is API, but not ABI compatible with previous releases;
  existing applications will have to be recompiled against this new version.
  Major features:
  - Introduces a D-Bus service to access the libtukit API via the
    org.opensuse.tukit.Transaction interface
  - Introduces a C binding via libtukit.h.
  Other changes:
  - t-u: Rework --quiet handling to make sure no output is shown even in
    error cases; this is necessary for automation, e.g. with Salt.
    [gh#openSUSE/transactional-update#73]
  - tukit: Allow storing command output into variable by introducing a new
    optional parameter for "execute" and "callExt".
  - Replace multiple and non-standalone occurenses of {} in "callExt"
    argument.
  - Split transactional-update.timer into transactional-update.timer
    and transactional-update-cleanup.timer; the later will clean up
    old snapshots even when the system does not do automatic updates.
  - tukit: Remove legacy alias "setDiscard" for "setDiscardIfUnchanged".
  - Throw exception if snapshot is not found.
  - Fix various compiler warnings
- Update spec file:
  - Include tukitd D-Bus daemon
  - Only install one version of the library (as there are no breaking API
    changes yet)
  - Add %pre scriplets for systemd services
  - Replace %systemd_postun scriptlets with %systemd_postun_with_restart
    to satisfy rpmlint checks
  - Add transactional-update log file as %ghost file

-------------------------------------------------------------------
Fri Nov 19 16:58:21 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.6.2
  - Bind mount root file system snapshot on itself, this makes the
    temporary directory in /tmp unnecessary; also fixes [boo#1188110]
    to return the correct snapshot's working directory via API call.
  - Use separate mount namespace for transactional-update; this should
    fix several applications that fail to run if a mount point has the
    'unbindable' mount flag set

-------------------------------------------------------------------
Wed Nov 10 14:55:06 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.6.1
  - Fix rsyncing /etc into the running system with
    --drop-if-no-change [bsc#1192242]

-------------------------------------------------------------------
Fri Oct 22 17:53:36 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.6.0
  - Simplify mount hierarchy by just using a single slave bind
    mount as the root of the update environment; this may avoid the
    error messages of failed unmounts
    May fix [boo#1191945]

-------------------------------------------------------------------
Tue Oct 12 09:42:57 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.7
  Various fixes affecting Salt support:
  - t-u: Don't squash stderr messages into stdout
  - t-u: Correctly handle case when the snapshot has been deleted due to
    using --drop-if-no-change: Don't show reboot messages and avoid an awk
    error message [bsc#1191475]
  - tukit: Make inotify handler less sensitive / ignore more directories
    [bsc#1191475]

-------------------------------------------------------------------
Thu Sep 23 23:12:28 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.6
  - tukit: Add S/390 bootloader support [bsc#1189807]
  - t-u: support purge-kernels with t-u patch [bsc#1190788]

-------------------------------------------------------------------
Fri Sep 17 14:02:17 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.5
  - t-u: Use tukit for SUSEConnect call [bsc#1190574]
    Correctly registers repositories

-------------------------------------------------------------------
Sat Sep 11 21:21:09 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.4
  - tukit: Fix resolved support [boo#1190383]

-------------------------------------------------------------------
Mon Sep  6 10:04:50 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.3
  - t-u: Purge kernels as part of package operations
    Required for live patching support [bsc#1189728]

-------------------------------------------------------------------
Mon Aug 30 17:17:29 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.2
  - tukit: Fix overlay syncing errors with SELinux [bsc#1188648]
  - Don't print message for `shell` with --quiet
    [gh#openSUSE/transactional-update#69]

-------------------------------------------------------------------
Tue Aug  3 12:41:41 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.1
  - t-u: Disable status file generation by default
    The new experimental `status` command requires the availability of
    /etc/YaST2/control.xml, which is not present on all systems. Hide the
    creation of the corresponding status file behind a new EXPERIMENTAL_STATUS
    option to try out this functionality.
  - Increase library version

-------------------------------------------------------------------
Tue Aug  3 07:37:36 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Add tukit.conf to spec file

-------------------------------------------------------------------
Mon Aug  2 15:58:09 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.5.0
  - Add alias setDiscardIfUnchanged for setDiscard. The old method name
    wasn't really clear and will be removed if we should have an API break
    in the future
  - Replace mkinitrd with direct dracut call [boo#1186213]
  - tukit: Add configuration file support (/etc/tukit.conf)
  - Allow users to configure additional bind mounts (see /usr/etc/tukit.conf
    for an example and limitations) [bsc#1188322]
  - Add 'transactional-update status' call. This is a POC for obtaining a
    hash of a system to verify its integrity. The functionality is still
    experimental!
  - Internal bugfixes / optimizations

-------------------------------------------------------------------
Sun Jun 13 23:18:28 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.4.0
  - Apply SElinux context on /etc in transaction [boo#1185625], [boo#1185766]
    [bsc#1186842], [boo#1186775]
  - Implement inotify handling in C instead of Bash; this makes the
    --drop-if-no-change option work on SLE Micro [bsc#1184529]
  - Use `tukit call` for up, dup and patch to allow resuming an update after
    zypper updated itself in the snapshot [bsc#1185226]
  - Fix obsolete output type messages in initrd [boo#1177149]
  - Make different base snapshot warning more visible [bsc#1185224]

-------------------------------------------------------------------
Thu Mar 25 22:13:59 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.3.0
  - Add support for more package managers by bind mounting their directories
  - Support snapshots without dedicated overlay [boo#1183539], [bsc#1183539]
  - Link RPM database correctly with older zypper versions [boo#1183521]
  - Don't discard manual changes in fstab [boo#1183856], [bsc#1192302]

-------------------------------------------------------------------
Fri Mar 12 13:45:09 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Revert inotify-tools dependency: The package is not available in
  SLE. This will probably have to be implemented as a native C
  version.

-------------------------------------------------------------------
Fri Mar 12 13:08:04 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.2.2
  - Don't skip patches with rebootSuggested flag [bsc#1183442]

-------------------------------------------------------------------
Wed Mar 10 15:14:03 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.2.1
  - t-u: Forward --quiet option to tukit
  - Regression: Add /opt as bind mount into update environment
  - Remove output indicators of the called command to not tamper
    the result line
  - Fix /etc syncing with --drop-if-no-change

-------------------------------------------------------------------
Wed Mar 10 12:40:56 UTC 2021 - Alberto Planas Dominguez <aplanas@suse.com>

- Requires inotify-tool to have --drop-if-no-change available

-------------------------------------------------------------------
Tue Mar  2 23:58:27 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.2.0
  - tukit: Add new command 'callext' to execute an application while the
    snapshot is mounted. '{}' as a parameter will be replaced with the path
    of the bind mount.
  - Fix --drop-if-no-change [boo#1182525]
  - Check whether self-updated version is executable (e.g. on noexec /tmp)
    [bsc#1173842]
  - Fix overlay synchronisation with SELinux (again)
  - Always overwrite supplemental files (e.g. for network configuration)
    even if they exist in the snapshot already [boo#1182544]
  - Improve logging and error messages

-------------------------------------------------------------------
Wed Feb 17 08:44:18 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.1.4
  - SELinux: Fix syncing of SELinux attributes when using overlays
  - SELinux: Tag the overlay directory itself (again)

-------------------------------------------------------------------
Mon Feb 15 13:10:39 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.1.3
  - Fix overlay syncing on SELinux systems
  - Fix resuming transactions where the parent does not exist any more

-------------------------------------------------------------------
Fri Feb 12 12:29:27 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.1.2
  - libtukit: Report when application was terminated due to a signal, and
    return the signal number as a return value. This will cause the
    transaction to be aborted when called via `execute`.
  - libtukit: Set PATH variable for internal commands to fixed value to
    find the helper applications, as in some environments such as PolicyKit
    PATH wouldn't be set.
  - Fix compiler warnings

-------------------------------------------------------------------
Tue Feb  9 21:15:52 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.1.1
  - Fix hang in tukit on aarch64 [bsc#1181844]
  - Prevent deletion of snapshots when resuming a snapshot where no
    transaction is open
  - Make tukit work in non-dbus environments [boo#1181934]

-------------------------------------------------------------------
Tue Feb  2 13:53:20 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.1.0
  - t-u: Support installing RPMs from the user's directory again
  - Adapt selfupdate to new packaging
  - Implement signal handling
  - Remove empty text files

-------------------------------------------------------------------
Mon Feb  1 09:20:44 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Add libselinux build time dependency
- Remove RPM version check

-------------------------------------------------------------------
Mon Feb  1 08:36:36 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Fix libstdc++ filesystem ABI incompatibility by using newer gcc
  version on old distributions. [boo#1181582]

-------------------------------------------------------------------
Thu Jan 28 14:25:53 UTC 2021 - Neal Gompa <ngompa13@gmail.com>

- Rework packaging based on Fedora packaging to separate all the
  components to remove the intrinsic requirement for Zypper

-------------------------------------------------------------------
Wed Jan 27 10:13:53 UTC 2021 - Ignaz Forster <iforster@suse.com>

- Version 3.0.0
  - This release changes the internal structure, but should be
    identical to the previous release feature wise.
  - Major parts of the previous Bash only application have been
    rewritten in C++ with the goal to provide an API around
    transactions; the transactional-update script is using that
    new interface internally already, however the API should
    be considered experimental for now - if you are interested to
    use it, please notify us in
    https://github.com/openSUSE/transactional-update/issues/52
  - A new tool called "tukit" provides a C++ tool that can be
    wrapped by scripts to leverage the functionality. Please
    consider it experimental for now, the commands may still change.
  - Bugfixes:
    - Implement support for system offline update [boo#1180808]
    - Add statistics files to update environment [boo#1173282]

-------------------------------------------------------------------
Mon Nov  9 08:30:54 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.38.3
  - SELinux: Make synchronisation work for both pre-SELinux
    snapshots and later snapshots; SELinux support should be ready
    for most tasks now.

-------------------------------------------------------------------
Fri Oct 30 08:45:46 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.28.2
  - SELinux: Exclude security.selinux attribute from rsyncing (again)

-------------------------------------------------------------------
Thu Oct 29 15:05:24 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.28.1
  - SELinux: Fixed changing the wrong grub configuration file
  - SELinux: Move /.autorelabel file to writeable location

-------------------------------------------------------------------
Thu Oct 22 12:20:38 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.28
  - Add 'setup-selinux' command for easy setup of a SELinux system
  - Allow complex commands for the 'run' command
  - SELinux: Fix /etc / overlay labeling

-------------------------------------------------------------------
Wed Oct 14 09:32:15 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.27
  - Add support for network systemd-resolvd network connections in t-u
    environment
  - Mount /var/lib/ca-certificates read-write to prevent SELinux error
  - Prevent calling transactional-update from within transactional-update

-------------------------------------------------------------------
Sat Sep 26 14:50:12 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.26
  - Fix broken sync for second snapshot [boo#1176989]
  - Add new options to allow separate cleanup of snapshots and overlays
  - Check for existence of inotifywait before using it
  - Check that mount options don't exceed maximum length

-------------------------------------------------------------------
Mon Sep 21 16:17:12 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.25.1
  - Fix inotify watcher setup
  - Use log_{info,error} for more messages to avoid messing up Salt logs

-------------------------------------------------------------------
Mon Sep 21 14:09:41 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.25
  - Reduce number of overlays:
    Instead of using transparent overlays for all previous layers only add the
    previous snapshot's overlay; this will greatly reduce the number of
    overlays while still making sure that /etc changes in the running system
    will be visible in the next snapshot
  - When using --drop-if-no-change synchronize potential /etc changes with
    running system
  - Exclude all non-root-fs mounts from inotify watcher

-------------------------------------------------------------------
Wed Aug 12 10:06:11 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.24.1
  - SELinux: adjust labels for etc, fstab and grub.cfg

-------------------------------------------------------------------
Thu Aug  6 08:32:11 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.24
  - Add partial SELinux support

-------------------------------------------------------------------
Fri Jul 31 16:11:04 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.23
  - Add "run" command to be able to execute a single command in a new snapshot
  - Add "--drop-if-no-change" option to discard snapshots if no changes were
    perfomed (BETA, required for Salt integration)
  - Removed previous CaaSP Salt support (gh#openSUSE/transactional-update#33)
  - Avoid "file not found" message on systems without /var subvol

-------------------------------------------------------------------
Thu Jul 23 13:17:47 UTC 2020 - Thorsten Kukuk <kukuk@suse.com>

- Remove unused attr requires
- Change bc to file requires

-------------------------------------------------------------------
Tue Jun 23 15:39:12 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.22
  - Use pkgconf to determine installation paths
  - Enable SSL connections in update shell
    [boo#1149131] & [boo#1133891] & [boo#1192078]

-------------------------------------------------------------------
Mon Apr  6 08:02:55 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Version 2.21.1
  - Rework error messages on failing umount [boo#1168389]

-------------------------------------------------------------------
Mon Mar 30 12:09:34 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Update to version 2.21
  - Use slave mounts for /proc, /sys & /dev

-------------------------------------------------------------------
Thu Mar 26 08:21:24 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Update to version 2.20.4
  - Mount efivarfs on EFI systems to make sure the bootloader will be installed
    correctly [boo#1162320]
  - Fix removal of existing overlay directories

-------------------------------------------------------------------
Fri Mar 13 12:10:02 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Add dependencies to btrfsprogs, zypper and snapper - most of the
  functionality is not usable if those applications are not
  installed. [boo#1166502]

-------------------------------------------------------------------
Tue Mar  3 16:34:26 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Update to version 2.20.3
  - Reintroduce compatibility with RPM < 4.15 for inclusion in
    SLE / Leap 15.2
  - Prepare for removal of /var/lib/alternatives [jsc#SLE-9101]

-------------------------------------------------------------------
Wed Feb 26 09:58:23 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Update to version 2.20.2
  - Use full names for zypper options [bsc#1164543]
  - Ignore /var/lib/rpm in shadowed file output
  - Optimize create-dirs-from-rpmdb

-------------------------------------------------------------------
Tue Jan  7 10:52:39 UTC 2020 - Ignaz Forster <iforster@suse.com>

- Update to version 2.20.1
  - Add missing documentation about --continue option
  - Avoid error message about missing fstab file on first snapshot creation.
    [boo#1160213]

-------------------------------------------------------------------
Fri Nov  8 10:27:10 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.20
  - Add the option `--continue` to extend an existing snapshot. This can be
    used to perform multiple operations before rebooting into the new state.
    [gh#openSUSE/transactional-update#16]
  - Make sure the dracut service to print warnings on /etc overlay conflicts
    also runs in the pre-made images.
  - Add "none" reboot method
  - Remove conflicting overlay artifacts in case an existing overlay directory
    will be reused

-------------------------------------------------------------------
Wed Sep 25 15:13:35 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.17
  - Provide network in shell on systems where resolv.conf is pointing to /run
    directly [boo#1151081]
  - Print new snapshot number at the end
  - Always mount /root subvolume when using shell command to preserve history

-------------------------------------------------------------------
Mon Sep  9 19:36:59 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.16
  - Use default command if options, but no command was given [boo#1146116]
  - Make sure only one process appears in `ps` output [boo#1111897]
  - Move update check: If a new repository is added (and
    ZYPPER_AUTO_IMPORT_KEYS is set) adding the new repository key won't fail
    any more
  - Avoid unnecessary snapshots / reboots by detecting zypper operations
    without changes more reliably (e.g. when installing an already installed
    package)
  - Update the manpage accordingly
  - Bugfixes:
    - Ignore commented lines in fstab when checking for shadowed files
    - Avoid warning when copying network config
- Remove Perl dependency
- Building documentation requires Python 3 now

-------------------------------------------------------------------
Wed Jun  5 15:15:09 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.15
  - Move description of interactiveness [boo#1132438]
  - Enable network during update [boo#1137890]
  - Add compatibilty with new overlayfs versions [boo#1140057]
  - Allow updates of the bootloader on EFI systems [boo#1139015]
  - Add support for /boot/writable [boo#1138725]

-------------------------------------------------------------------
Mon Apr 29 12:20:51 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.14.2
  - Prevent unnecessary error message on systems not installed with
    YaST (e.g. KIWI)

-------------------------------------------------------------------
Wed Apr 17 08:37:18 CEST 2019 - kukuk@suse.de

- Add requires for bc, needed for some calculations

-------------------------------------------------------------------
Mon Mar 25 14:53:12 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.14.1
  - Improve non-root fs changes checker based on feedback
  - Disable snapper's zypper plugin during transactional-update run
- Allow parallel installation with snapper's zypper plugin (useful on
  read-write systems).

-------------------------------------------------------------------
Fri Mar 15 10:45:52 UTC 2019 - Ignaz Forster <iforster@suse.com>

- Update to version 2.14
  - Warn user if contents of /var have been changed during update
  - Noteworthy: swapped position of upperdir and lowerdir in fstab for better
    readability
  - Major update to the transactional-update guide

-------------------------------------------------------------------
Mon Mar  4 10:40:21 CET 2019 - kukuk@suse.de

- Update to version 2.13.2
  - add hooks for telemetrics

-------------------------------------------------------------------
Thu Feb 14 16:26:54 UTC 2019 - iforster@suse.com

- Update to version 2.13.1
  - Bugfix: Clean up empty /etc snapshot directories again
- Use official release files from GitHub for building

-------------------------------------------------------------------
Thu Feb 14 12:14:47 UTC 2019 - iforster@suse.com

- Update to version 2.13
  - Fix a serious data loss problem (deleting all files in /etc
    overlays) in case /var/lib/overlay/etc is not part of any
    snapshot any more.
  - Avoid error message in case a system has no /etc/fstab.sys

-------------------------------------------------------------------
Mon Jan 28 19:05:42 UTC 2019 - iforster@suse.com

- Update to version 2.12
  - Implements support for needs-restart (Fate#326451)
  - Adds easy rollback to last known working snapshot by using "last"
    as the snapshot number
  - Migrate /etc/fstab.sys entires to /etc/fstab for systemd being
    able to create mount units; this will prevent errors on unmount
  - Remove implicit --no-allow-vendor-change - this option can be
    configured in zypper's configuration file now
  - Add support for mounting the /etc overlay file system as a systemd
    unit in /etc/fstab on a read-only system (replacing /etc/fstab.sys
    in the long run)
  - Various bugfixes:
    - Only remove /etc overlays on read-only root file systems
      [boo#1122455]
    - Disable "Persistent" flag in systemd timer unit to prevent
      updates during or immediately after the boot phase
    - Don't set global zypper options during migration - this is not
      supported by the migration plugin
    - Fix error handling when interrupting while rsync is running
    - Filter out security.selinux attributes during rsync

-------------------------------------------------------------------
Sat Nov 17 09:06:44 UTC 2018 - Jan Engelhardt <jengelh@inai.de>

- Use noun phrase in summary.

-------------------------------------------------------------------
Mon Nov 12 14:27:24 UTC 2018 - iforster@suse.com

- Update to version 2.11
  - Update man page to explain new /etc overlay handling
  - Add special handling for migrating away from old overlay directory
  - Read default update method for systemd service from config file
- Add package "transactional-update-zypp-config" to prevent accidental
  transactional-update uninstallation on transactional systems
  (boo#1111319)
- Use "up" for systemd service on non-rolling release distributions
  (boo#1111321)

-------------------------------------------------------------------
Thu Oct  4 12:42:35 UTC 2018 - iforster@suse.com

- Update to version 2.10
  - Introduce /etc overlays
    - Each root file system snapshot now has a dedicated /etc overlay in
      /var/lib/snapshots/<snapshot number>/etc
    - Changes in older snapshots will be visible in newer snapshots (if
      the file hasn't been changed in both snapshots), but not the other
      way around; this makes it possible to roll back to a previous
      snapshot even if the configuration is broken
    - The /etc state of the oldest active snapshot will be synchronized
      into the new snapshot to prevent ever growing overlays
    - Removed creation of /etc backup snapshots
    - Removed complex overlayfs cleanup handling during dracut early boot;
      only thing left is to output a warning if files have been changed
      in old and new overlay after snapshot creation
    - Unused overlays will be removed during "cleanup" operation
  - Add compatibility with snapper >= 0.7.0
  - Correctly detect BTRFS ID when using multiple snapper configurations
  - Fix disappearing prompt in "shell" command when application was updated
  - Prevent accidental rollback on fast reboots (boo#1111786)
  - Use zypper attribute packages-to-change if available (boo#1105992 &
    boo#1097619)
  - Add kexec as reboot alternative
  - Added explicit --with-doc / --without-doc build configure opttions for
    enforcing or excluding documentation build
  - Removed precompiled documentation (boo#1088676)
  - Added more dependency checks to configure script
  - Small improvements to documentation
  - Restored compatibility with older rsync versions not supporting the -x
    filter
  - Small bugfixes for cleanup in error situations
  - Fix possible incorrect detection of snapshots numbers during cleanup
  - Mention parent in snapshot description
- Add dependencies for documentation build (boo#1088676)

-------------------------------------------------------------------
Mon Aug 20 15:09:44 UTC 2018 - iforster@suse.com

- Update to version 2.6
  - Add --interactive and --non-interactive options to change the default
    interactivity for zypper calls. For previously non-interactive calls (e.g.
    dup) these options makes it possible to pick the correct solution in case
    of conflicts or make sure that a script will never be stuck at an input
    prompt.
  - Add kured reboot support
  - Tries to clean up temporary files and mount points if transactional-update
    quits unexpectedly
  - Remove trancactional-update-helper (replaced by zypper options)
  - Create /var/lib/zypp if not available (boo#1104452)
  - Robustify parsing zypper output (boo#1105992)
  - Various small fixes
- Changed permissions of systemd script again

-------------------------------------------------------------------
Fri Jun 15 12:05:24 UTC 2018 - iforster@suse.com

- Update to version 2.5
  - Support for overlayfs attributes like trusted.overlay.opaque - this will
    avoid disappearing configuration files on system updates
  - Documentation update
  - Only sync /etc if it's on an overlayfs mount
  - Use correct locale for zypper - thus updating locale specific packages and
    avoiding "empty" updates where transactional-update didn't see the change
- Add dependency to attr
- Fix permissions of systemd script

-------------------------------------------------------------------
Tue Jun  5 17:07:25 CEST 2018 - kukuk@suse.de

- Update to version 2.4
  - Bug fix release

-------------------------------------------------------------------
Mon May 14 16:16:08 UTC 2018 - iforster@suse.com

- Update to version 2.3
  - Reformat help text / synopsis
  - More detailled output (use --quiet for less output)
  - Log all error messages into log file
  - Avoid potential lock file race condition on self update
  - Accept package names with whitespace
  - Don't wait for user input during self-update
  - Fix broken error message output when creating new snapshot without reboot
  - Fix erroneous mounting of stale grub mounts

-------------------------------------------------------------------
Wed May  2 08:39:18 UTC 2018 - iforster@suse.com

- Update to version 2.2
  - Fix security issue in self update [boo#1091316]
  - Create dirs in /var more reliably by sorting the list
- Rebuild initrd (needed since 2.0)

-------------------------------------------------------------------
Thu Apr 26 15:14:36 CEST 2018 - kukuk@suse.de

- Update to version 2.1
  - Cleanup the code cleaning up /etc

-------------------------------------------------------------------
Tue Apr 24 14:23:41 CEST 2018 - kukuk@suse.de

- Update to version 2.0
  - Create missing directories from rpm database during boot
  - Merge /etc overlay with root subvolume during update

-------------------------------------------------------------------
Fri Apr 20 15:57:21 CEST 2018 - kukuk@suse.de

- Update to version 1.29
  - Implement self-update
  - Disable optical media on dup
  - Ignore certain zypper return codes

-------------------------------------------------------------------
Tue Apr  3 08:51:33 UTC 2018 - rbrown@suse.com

- Add conflicts with snapper-zypp-plugin 

-------------------------------------------------------------------
Sat Mar 17 19:48:44 UTC 2018 - rbrown@suse.com

- Require perl-HTML-Parser (needed since 1.26) [boo#1085764] 

-------------------------------------------------------------------
Mon Mar 12 13:19:49 CET 2018 - kukuk@suse.de

- Update to version 1.28
  - Adjust for latest grub2

-------------------------------------------------------------------
Tue Mar  6 13:32:38 CET 2018 - kukuk@suse.de

- Update to version 1.27
  - Fallback to snapper without dbus support if dbus fails
  - Add workaround for update-alternatives
  - Add support for /usr/etc/transactional-update.conf

-------------------------------------------------------------------
Fri Feb 23 12:01:53 UTC 2018 - kukuk@suse.com

- Use %license instead of %doc [bsc#1082318]

-------------------------------------------------------------------
Wed Jan 31 16:14:14 CET 2018 - kukuk@suse.de

- Update to version 1.26
  - Auto accept repo keys config option
  - Detect broken snapshots after abort
  - Ignore user deleted snapshots
  - Include all error messages in main log file
  - Add configuration file
  - Correctly implement migration of major OS versions
  - Default reboot strategy is configuration option
  - Salt option is deprecated

-------------------------------------------------------------------
Tue Jan  9 11:42:20 CET 2018 - kukuk@suse.de

- Update to version 1.25
  - preliminary SELinux support
  - support for seperate /var subvolume

-------------------------------------------------------------------
Tue Dec  5 19:38:47 UTC 2017 - kukuk@suse.de

- Update to version 1.24
  - Don't save unused snapshots if we may delete them again.
    Partly fixes [bsc#1071038]
  - Copy passwd, group and shadow to /usr/etc if modified

-------------------------------------------------------------------
Fri Nov 17 14:54:33 CET 2017 - kukuk@suse.de

- Update to version 1.23
  - Fix re-registration in rollback case
  - Fix problems with updating the grub2 bootloader
  - Add support for migration of products with SCC/SMT
  - Re-add support to re-write bootloader
  [bsc#1068933]

-------------------------------------------------------------------
Tue Nov  7 16:34:28 CET 2017 - kukuk@suse.de

- Update to version 1.22
  - Rewrite cleanup code to be more aggressive

-------------------------------------------------------------------
Fri Oct 27 13:52:56 CEST 2017 - kukuk@suse.de

- Update to version 1.21
  - Reset salt grains even if no update was found

-------------------------------------------------------------------
Wed Sep 13 11:24:28 CEST 2017 - kukuk@suse.de

- Update to version 1.20
  - Improve documentation
  - Add pkg update option

-------------------------------------------------------------------
Fri Jun 30 09:58:51 CEST 2017 - kukuk@suse.de

- Update to version 1.19
  - Add 'shell' option for debugging and testing

-------------------------------------------------------------------
Wed Jun 28 14:13:27 CEST 2017 - kukuk@suse.de

- Update to version 1.18
  - Auto accept product license in non-interactive mode


-------------------------------------------------------------------
Tue Jun 27 09:12:58 CEST 2017 - kukuk@suse.de

- Update to version 1.17
  - copy modified bootloader config into snapshot
  - unit file cleanup, no change of behavior

-------------------------------------------------------------------
Mon Jun 26 14:21:38 CEST 2017 - kukuk@suse.de

- Update to version 1.16
  - internal changes [bsc#1045942]

-------------------------------------------------------------------
Thu Jun  1 15:56:56 CEST 2017 - kukuk@suse.de

- Update to version 1.15
  - Rename option ptf to pkg
  - Add option to set salt grains

-------------------------------------------------------------------
Fri Apr 21 11:24:54 CEST 2017 - kukuk@suse.de

- Update to version 1.14
  - Fix check of return values of commands in pipes [bsc#1034900]

-------------------------------------------------------------------
Tue Mar 21 10:35:17 CET 2017 - kukuk@suse.de

- Update to version 1.12
  - minor bug fixes

-------------------------------------------------------------------
Thu Mar  2 13:20:36 CET 2017 - kukuk@suse.de

- Update to version 1.11
  - use --no-allow-vendor-change with "zypper dup"
  - update manual page

-------------------------------------------------------------------
Mon Feb 13 14:33:13 CET 2017 - kukuk@suse.de

- Update to version 1.10
  - implement and document rollback option

-------------------------------------------------------------------
Tue Feb  7 08:04:50 CET 2017 - kukuk@suse.de

- Update to version 1.9
  - fix umounting of special filesystems and subvolumes
  - fix interactive installation of PTFs [bsc#1023026]
  - fix dependencies of systemd service

-------------------------------------------------------------------
Wed Feb  1 17:51:32 CET 2017 - kukuk@suse.de

- Add Requires for lsof and fuser

-------------------------------------------------------------------
Wed Feb  1 14:50:37 CET 2017 - kukuk@suse.de

- Update to version 1.8
  - fix references in html docu
  - build kdump initrd if we build standard initrd, too

-------------------------------------------------------------------
Mon Jan 30 11:20:26 CET 2017 - kukuk@suse.de

- Update to version 1.7
  - build html docu, too

-------------------------------------------------------------------
Sun Jan 29 13:27:08 UTC 2017 - kukuk@suse.de

- Update to version 1.6
  - Add support for kdump [bsc#1018098]

-------------------------------------------------------------------
Thu Jan 19 10:24:13 CET 2017 - kukuk@suse.de

- Update to version 1.5
  - Install PTFs in interactive mode
  - Sync state file between current and new snapshot

-------------------------------------------------------------------
Tue Jan 17 11:30:19 CET 2017 - kukuk@suse.de

- Update to version 1.4
  - Fix wrong error messages
  - More debug output if umount fails
  - Try a second time if umount fails

-------------------------------------------------------------------
Mon Dec 19 10:37:59 CET 2016 - kukuk@suse.de

- Update to version 1.3
  - Add initrd option

-------------------------------------------------------------------
Thu Dec 15 10:38:58 CET 2016 - kukuk@suse.de

- Do some spec file cleanup

-------------------------------------------------------------------
Mon Dec 12 10:18:28 CET 2016 - kukuk@suse.de

- Update to version 1.2
  - suppport ro-subvolume with overlayfs

-------------------------------------------------------------------
Tue Dec  6 10:24:19 CET 2016 - kukuk@suse.de

- Update to version 1.1
  - bug fix release
  - implement lock

-------------------------------------------------------------------
Wed Nov 23 16:36:20 CET 2016 - kukuk@suse.de

- Update to version 1.0
  - implement and document PTF options

-------------------------------------------------------------------
Mon Nov 21 13:35:50 CET 2016 - kukuk@suse.de

- Update to version 0.99
  - Support for rebootmgr
  - Write real manual page

-------------------------------------------------------------------
Mon Nov 21 12:02:44 CET 2016 - kukuk@suse.de

- Add empty directory 
  /etc/systemd/system/transactional-update.timer.d/
  so to make it easier to override transactional-update.timer 
  entries.

-------------------------------------------------------------------
Thu Nov 17 15:53:00 CET 2016 - kukuk@suse.de

- Update to version 0.90
  - Finish normal options
  - Implement support for PTFs

-------------------------------------------------------------------
Sun Nov  6 12:52:50 UTC 2016 - kukuk@suse.com

- Disable restart on update for post install scripts

-------------------------------------------------------------------
Sun Nov  6 10:27:01 UTC 2016 - kukuk@suse.de

- Implement activating the new snapshot as new root filesystem

-------------------------------------------------------------------
Fri Nov  4 14:19:49 CET 2016 - kukuk@suse.de

- Initial version

openSUSE Build Service is sponsored by