File glpk.spec of Package glpk

#
# spec file for package glpk (Version 4.31)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# norootforbuild


Name:           glpk
Version:        4.31
Release:        4
License:        GPL v3 only
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
Group:          Development/Libraries/C and C++
Summary:        GNU Linear Programming Kit
Url:            http://www.gnu.org/software/glpk/glpk.html
Source:         %{name}-%{version}.tar.bz2
Requires:       libglpk0 >= %{version}
BuildRequires:  ghostscript texlive

%description
The GLPK package is intended for solving large-scale linear
programming, mixed integer programming, and other related problems. It
is a set of routines written in ANSI C and organized in the form of a
callable library.



%package devel
License:        GPL v3 only
Summary:        GNU Linear Programming Kit
Group:          Development/Libraries/C and C++
Requires:       libglpk0 = %{version}

%description devel
The GLPK package is intended for solving large-scale linear
programming, mixed integer programming, and other related problems. It
is a set of routines written in ANSI C and organized in the form of a
callable library.



%package -n libglpk0
License:        GPL v3 only
Summary:        GNU Linear Programming Kit
Group:          Development/Libraries/C and C++

%description -n libglpk0
The GLPK package is intended for solving large-scale linear
programming, mixed integer programming, and other related problems. It
is a set of routines written in ANSI C and organized in the form of a
callable library.



%package doc
License:        GPL v3 only
Summary:        GNU Linear Programming Kit
Group:          Development/Libraries/C and C++
Requires:       libglpk0 = %{version}

%description doc
The GLPK package is intended for solving large-scale linear
programming, mixed integer programming, and other related problems. It
is a set of routines written in ANSI C and organized in the form of a
callable library.



%prep
%setup -q

%build
%configure --enable-static=no
make %{?jobs:-j%jobs}

%install
%makeinstall
rm $RPM_BUILD_ROOT%{_libdir}/*.la
mkdir -p $RPM_BUILD_ROOT%{_docdir}/%{name}/examples
cp examples/*.{mod,c,dat,mps,lp} $RPM_BUILD_ROOT%{_docdir}/%{name}/examples
mkdir $RPM_BUILD_ROOT%{_docdir}/%{name}/doc
dvipdf doc/glpk.dvi doc/glpk.pdf
dvipdf doc/gmpl.dvi doc/gmpl.pdf
cp doc/{*.txt,*.pdf} $RPM_BUILD_ROOT%{_docdir}/%{name}/doc
cp {AUTHORS,ChangeLog,COPYING,NEWS,README} $RPM_BUILD_ROOT%{_docdir}/%{name}

%clean
rm -rf "$RPM_BUILD_ROOT"

%post -n libglpk0 -p /sbin/ldconfig

%postun -n libglpk0 -p /sbin/ldconfig

%files
%defattr(-,root,root)
%dir %{_docdir}/%{name}
%{_docdir}/%{name}/AUTHORS
%{_docdir}/%{name}/ChangeLog
%{_docdir}/%{name}/COPYING
%{_docdir}/%{name}/NEWS
%{_docdir}/%{name}/README
%{_bindir}/glpsol

%files -n libglpk0
%defattr(-,root,root)
%{_libdir}/*.so.*

%files devel
%defattr(-,root,root)
%{_includedir}/*
%{_libdir}/*.so

%files doc
%defattr(-,root,root)
%dir %{_docdir}/%{name}
%dir %{_docdir}/%{name}/doc
%doc %{_docdir}/%{name}/doc/*
%dir %{_docdir}/%{name}/examples
%doc %{_docdir}/%{name}/examples/*

%changelog
* Mon Sep 15 2008 pgajdos@suse.cz
- ghostscript instead of ghostscript-mini in the BuildRequires
  section
* Thu Sep 11 2008 pgajdos@suse.cz
- updated to 4.31:
  * glpspx.h, glpspx01.c, glpspx02.c, glpapi06.c
  The dual simplex solver (spx_dual_opt) was replaced by a new
  implementation of the two-phase dual simplex method (spx_dual).
  Old simplex method routines (spx_prim_opt, spx_prim_feas, and
  spx_dual_opt) were removed from the package.
  * glpk.h, glpscl.h, glpscl.c, glpapi04.c
  New API routine glp_scale_prob was added. It replaces routine
  lpx_scale_prob which is deprecated.
  * glpk.h, glpini.h, glpini01.c, glpini02.c, glpapi05.c
  New API routines glp_std_basis, glp_adv_basis, glp_cpx_basis
  were added. They replace routines lpx_std_basis, lpx_adv_basis,
  lpx_cpx_basis which are deprecated.
  * glpdmp.c
  8-byte data alignment was added to the module (sufficient for
  both ILP32 and LP64 environments).
  * glplib07.c
  16-byte data alignment was added to the module to provide
  compatibility with LP64 environment (8-byte is not sufficient
  due to jmp_buf; thanks to Xypron for investigation).
  * glplpx16.c
  New version of the routine lpx_write_pb was added. Thanks to
  Oscar Gustafsson <oscarg@isy.liu.se> for the contribution.
  * glpspx.h, glpspx03.c, glpapi06.c
  The primal simplex solver (spx_prim_opt, spx_prim_feas) was
  replaced by a new implementation (spx_primal), which currently
  provides the same features as the old version.
  * glpmpl01.c, glpmpl03.c
  Some changes were made in the MathProg translator to allow <,
  <=, >=, and > on comparing symbolic values. Thanks to Heinrich
  Schuchardt <heinrich.schuchardt@gmx.de> for patches.
  * glplpx10.c
  Internal routine set_d_eps in the exact LP solver was changed
  to prevent approximation errors in case of integral data.
  Thanks to Markus Pilz <pilz@cs.uni-bonn.de> for bug report.
  * configure.ac
  The configure script was changed to disable optional features
  by default. For details see file INSTALL.
  * glpipp02.c
  A bug was fixed in the internal routine reduce_bounds. Thanks
  to Anne-Laurence Putz <anne-laurence.putz@eurodecision.com> for
  the bug report.
  * glpapi01.c
  New API routine glp_erase_prob was added.
  * glpapi13.c
  New API routines glp_read_mps and glp_write_mps were added.
  They replace API routines lpx_read_mps, lpx_read_freemps,
  lpx_write_mps, and lpx_write_freemps, which are deprecated.
  * glpapi14.c
  New API routines glp_read_lp and glp_write_lp were added. They
  replace API routines lpx_read_cpxlp and lpx_write_cpxlp, which
  are deprecated.
  * glpsql.c
  Minor bug was fixed. Thanks to Xypron <xypron.glpk@gmx.de> for
  the bug report.
* Mon Aug 18 2008 pgajdos@suse.cz
- fixed glpk.pdf and gmpl.pdf build [bnc#417864]
* Thu Jul 03 2008 pgajdos@suse.cz
- updated to 4.28:
  * Three wrapper routines xdlopen, xdlsym, and xdlclose, which
  provide the shared library support, were added.
  * A static linking to iODBC and MySQL libraries used in the
  MathProg table drivers was replaced by a dynamic linking to
  corresponding shared libraries.
  * Compressed data file support was added.
  * Command-line interface routines were added.
  * bug fixes
* Mon May 19 2008 pgajdos@suse.cz
- sort_pool() defined as void [bnc#319454]
  (void-function.patch)
* Mon Apr 07 2008 pgajdos@suse.cz
- fixed BuildRequires
* Thu Mar 27 2008 pgajdos@suse.cz
- initial version, moved from OBS (project home:akos_ladanyi)
openSUSE Build Service is sponsored by