File rpcbind.spec of Package rpcbind
#
# spec file for package rpcbind (Version 0.1.6+git20080930)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# norootforbuild
BuildRequires: libtirpc-devel tcpd-devel
Name: rpcbind
License: BSD 3-Clause
Group: Productivity/Networking/System
AutoReqProv: on
Version: 0.1.6+git20080930
Release: 5
Summary: Transport independent RPC portmapper
Url: http://nfsv4.bullopensource.org/doc/tirpc_rpcbind.php
Source: %{name}-%{version}.tar.bz2
Source1: rpcbind.init
Source2: sysconfig.rpcbind
Source3: rpcbind.xml
Source4: pmap_set.c
BuildRoot: %{_tmppath}/%{name}-%{version}-build
Provides: portmap = 6.0+git20070716
Obsoletes: portmap <= 6.0+git20070716
PreReq: %insserv_prereq %fillup_prereq
%define statefile /var/lib/portmap.state
%description
Rpcbind is a replacement for portmap. Whereas portmap supports only UDP
and TCP transports over INET (IPv4), rpcbind can be configured to work
on various transports supported by the TI-RPC. This includes TCP and
UDP over IPv6. Moreover, rpcbind provides additional functions in
regards to portmap.
Authors:
--------
Gilles Quillard <gilles.quillard@bull.net>
Vincent ROQUETA <vincent.roqueta@ext.bull.net>
%prep
%setup
cp %{SOURCE4} .
%build
autoreconf -fi
./configure --prefix=%{_prefix} \
--bindir=/sbin \
--mandir=%{_mandir} \
--localstatedir=%{_localstatedir} \
--enable-libwrap \
--enable-warmstarts \
--with-statedir=%{_localstatedir}/lib/rpcbind \
--enable-debug \
CFLAGS="$RPM_OPT_FLAGS -fpie" \
LDFLAGS="-pie"
make
gcc -o pmap_set $RPM_OPT_FLAGS pmap_set.c
%install
make install DESTDIR=$RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/etc/init.d/
install -m 755 %{SOURCE1} $RPM_BUILD_ROOT/etc/init.d/rpcbind
ln -s /etc/init.d/rpcbind $RPM_BUILD_ROOT/sbin/rcrpcbind
mkdir -p $RPM_BUILD_ROOT%_localstatedir/lib/rpcbind
# for now remove this man page since it conflicts with glibc
rm -f $RPM_BUILD_ROOT%{_mandir}/man8/rpcinfo.8
# fillup template
mkdir -p $RPM_BUILD_ROOT/var/adm/fillup-templates
install -m 644 %{SOURCE2} $RPM_BUILD_ROOT/var/adm/fillup-templates/
mkdir -p $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d
install -m 644 %{SOURCE3} $RPM_BUILD_ROOT%_datadir/omc/svcinfo.d/
#
install -m 755 pmap_set $RPM_BUILD_ROOT/sbin/pmap_set2
%clean
rm -rf $RPM_BUILD_ROOT
%pre
# upgrade case from portmap
# 1. if portmap is running, dump portmap tables
if checkproc /sbin/portmap; then
rm -f %statefile
test -x /sbin/pmap_dump && /sbin/pmap_dump > %statefile
fi
# 2. disable portmap service to be able to enable rpcbind
if test -x /sbin/portmap && chkconfig -c portmap 3; then
/sbin/insserv -f -r portmap
fi
%preun
%stop_on_removal rpcbind
%post
%fillup_and_insserv -y rpcbind
# if portmap is running, we need to stop portmap *now*,
# start rpcbind and restore the old tables
if test -r %statefile; then
/etc/init.d/portmap stop > /dev/null || :
/etc/init.d/rpcbind start > /dev/null || :
/sbin/pmap_set2 < %statefile
rm -f %statefile
fi
%postun
%restart_on_update rpcbind
%insserv_cleanup
%files
%defattr(-,root,root)
%doc AUTHORS ChangeLog COPYING NEWS README
/sbin/pmap_set2
/sbin/rpcbind
/sbin/rpcinfo
%doc %{_mandir}/*/*
%config /etc/init.d/rpcbind
/sbin/rcrpcbind
%{_localstatedir}/lib/rpcbind
/var/adm/fillup-templates/sysconfig.rpcbind
%{_datadir}/omc/svcinfo.d/rpcbind.xml
%changelog
* Tue Dec 02 2008 ro@suse.de
- rename installed pmap_set to pmap_set2 to avoid conflict
with portmap
* Mon Dec 01 2008 mkoenig@suse.de
- if upgrading from portmap:
* we need to stop portmap and start rpcbind in %%post since the
restart on upgrade mechanism does not work here
* dump portmap tables and set them again in rpcbind [bnc#446388]
- add pmap_set.c which is needed to set the old portmap tables
in rpcbind
* Wed Nov 26 2008 mkoenig@suse.de
- specify runlevel in chkconfig check [bnc#444663]
* Wed Nov 05 2008 mkoenig@suse.de
- fix version comparison in Obsoletes [bnc#440313]
- disable portmap service in pre script to avoid problems when
upgrading from portmap
* Wed Oct 15 2008 mkoenig@suse.de
- update to 0.1.6 with additional patches from git
* Fixed an ipv6 related segfault on startup
* rpcbind needs to also downgrade its gid to a non-priviledgied group
* Removed the documentation about the non-existent '-L' flag
* Introduce helpers for ipprot/netid mapping
* Change how we decide on the netids to use for portmap
* Simplify port live check in pmap_svc.c
* Support portmap on AF_LOCAL, too
* Fix for warm start
* Properly identify local root user over ipv4/v6
- fixes [bnc#435637]
- remove patch
rpcbind-0.1.4-iff_up.patch
rpcbind-0.1.4-localaddr.patch
* Mon Aug 18 2008 mkoenig@suse.de
- use version in Provides/Obsoletes
* Fri Jul 18 2008 mkoenig@suse.de
- update to version 0.1.5
- license change to BSD-3
- patches merged
rpcbind-0.1.4-compile.patch
rpcbind-0.1.4-debug.patch
rpcbind-0.1.4-libwrap.patch
rpcbind-0.1.4-recvfrom-fix.patch
rpcbind-0.1.4-rpcuser.patch
rpcbind-0.1.4-warmstarts-cleanup.patch
rpcbind-0.1.4-warmstarts.patch
* Wed Apr 02 2008 mkoenig@suse.de
- initial packaging, version 0.1.4 [fate#300607]
- add patches from Steve Dickson, including fixes and
support for debug and warmstart
- build as PIE
