File texinfo.changes of Package texinfo
-------------------------------------------------------------------
Fri Feb 2 13:05:43 UTC 2024 - Dr. Werner Fink <werner@suse.de>
- Update to version 7.1 (18 October 2023)
* Language
. new generic definition commands, @defblock, @defline and @deftypeline,
for definitions without automatic index entries
. new @linemacro facility eases use of generic definition commands
. new command @link creates plain links (supported output formats only)
. @cartouche takes an argument to specify the cartouche title
. you can use the new commands @nodedescription and @nodedescriptionblock
to give text to be used in menu descriptions in Info and HTML output
* texi2any
. @itemx at the beginning of a @table is now an error, not a warning
. better validity checking of deeply nested commands
. check that @set and @clear only appear at the start of a line
. warn about missing menu entries even if CHECK_NORMAL_MENU_STRUCTURE is
not set. you can turn this off by setting CHECK_MISSING_MENU_ENTRY to 0.
. no longer use --enable-encoding and --disable-encoding to determine
whether to output encoded characters (instead of entities or commands)
for HTML, XML, DocBook and LaTeX; instead, use the value of the
OUTPUT_CHARACTERS customization variable.
. stricter checks on input encoding, in particular more warnings and
errors with malformed UTF-8
. support any input file encoding if support exists in the operating
system, not just a selected list of encodings
. resolve an alias referring to another alias at definition time
. internally, use "source marks" to keep all Texinfo source information that
is not in the final tree (location of macros, values and included files
expansion, @if* blocks, DEL comment, and @ protecting end of line on @def*
lines)
. HTML output:
. format @subentry and index entries with @seealso or @seeentry in a more
similar way to printed output
. output @shortcontents before @contents by default
. omit colons after index entries by default. this can still be
configured with INDEX_ENTRY_COLON.
. add @example syntax highlighting as a texi2any extension
. no more capitalization of @sc argument in HTML Cross-references
. change @point expansion to U+22C6 in HTML Cross-references
. if a @node is not associated with a sectioning command but is
followed by a heading command not usually associated to nodes
such as @heading and this command appears before other formatted
content, the heading command is assumed to supply the node heading.
you can customize this with USE_NEXT_HEADING_FOR_LONE_NODE.
. Info output:
. new variable ASCII_DASHES_AND_QUOTES, on by default,
outputs ASCII characters for literal quote or hyphen characters
in source, rather than UTF-8. this makes it easier to search
Info files.
. new ASCII_GLYPH variable for using ASCII renditions for glyph
commands (like @bullet)
. ASCII_PUNCTUATION still includes the effect of these new variables.
. new variables AUTO_MENU_DESCRIPTION_ALIGN_COLUMN and AUTO_MENU_MAX_WIDTH
control the format of descriptions in generated menus
. XML output:
. place menu leading text and menu separators in elements instead
of attributes
* texi2dvi
. macro expansion with texi2any requires at least version 5.0 (only
happens with --expand option or with very old texinfo.tex)
* texinfo.tex
. in @code, ` and ' output by default with backtick and undirected
single quote glyphs in the typewriter font. you can still configure
this using the @codequoteundirected/@codequotebacktick commands.
. do not insert a space for @ def line continuation, matching the behavior
of texi2any
. align section titles in table of contents when more than 10 sections
. microtype is off by default, for speed
. page headings generation is no longer linked to the @titlepage command
* info
. when going Up, position cursor on menu entry for current node
. allow mouse scrolling support regardless of termcap entries. this
supports some more xterm configurations.
. do not use "/index" as a possible file extension for Info files
* texi2any
. fix performance regression when Perl binary extension (XS) modules
are not being used (e.g. with TEXINFO_XS=omit)
* info
. further fix of recoding of UTF-8 files to ASCII to avoid text
disappearing from nodes
. avoid possible freeze at start of a file with `-v nodeline=pointers'
* texi2any
. do not distribute architecture-dependent files
. build fixed on OpenIndiana 11
* info
. further fix of recoding of UTF-8 files to ASCII
. fix check for presence of man pages on Solaris
* install-info
. fix build by avoiding function name clash on some platforms
. compiler warning re strncat silenced
* texi2any
. avoid crashes on empty @image argument and other potential crashes
(with "Can't use an undefined value as an ARRAY reference" message)
. avoid hang on @ref command inside section command
* info
. fix recoding of UTF-8 files to ASCII when run in C locale
* js
. index search fixed for new HTML output
. some obsolete files removed from distribution
- Port patch texinfo-zlib.patch
- Use libzio 1.09 to support compressed 'dir' data base files
-------------------------------------------------------------------
Sun Mar 26 19:52:00 UTC 2023 - Andreas Stieger <andreas.stieger@gmx.de>
- texinfo 7.0.3:
* texi2any: fix performance regression when Perl binary
extension (XS) modules are not being used (e.g. with
TEXINFO_XS=omit)
* info: further fix of recoding of UTF-8 files to ASCII to avoid
text disappearing from nodes
* info: avoid possible freeze at start of a file with
`-v nodeline=pointers'
-------------------------------------------------------------------
Sat Feb 4 21:00:47 UTC 2023 - Andreas Stieger <andreas.stieger@gmx.de>
- texinfo 7.0.2:
* texi2any: do not distribute architecture-dependent files
* info: further fix of recoding of UTF-8 files to ASCII
* install-info: build fixes
-------------------------------------------------------------------
Tue Dec 27 13:22:54 UTC 2022 - Ludwig Nussel <lnussel@suse.com>
- Replace transitional %usrmerged macro with regular version check (boo#1206798)
-------------------------------------------------------------------
Sun Dec 4 07:33:56 UTC 2022 - Andreas Stieger <andreas.stieger@gmx.de>
- texinfo 7.0.1:
* texi2any: avoid multiple crashes on empty @image argument and
other conditions
* avoid hang on @ref command inside section command
* info: fix recoding of UTF-8 files to ASCII when run in C
locale
* js: index search fixed for new HTML output
-------------------------------------------------------------------
Tue Nov 15 07:55:39 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- Update to version 7.0 (7 November 2022)
* texi2any
* LaTeX added as an output format, selected with --latex
* EPUB 3 added as an output format, selected with --epub3
* reform throughout the code in general
* thorough review of character encoding issues
* new customization variables involved with character encoding:
INPUT_FILE_NAME_ENCODING, OUTPUT_FILE_NAME_ENCODING,
DOC_ENCODING_FOR_INPUT_FILE_NAME, DOC_ENCODING_FOR_OUTPUT_FILE_NAME,
MESSAGE_ENCODING and COMMAND_LINE_ENCODING
* warn if full-text commands (@ref, @footnote, @anchor) appear in @w
* new variable NO_TOP_NODE_OUTPUT
* IGNORE_BEFORE_SETFILENAME variable removed. former effect
is now always on.
* HTML output:
* use manual_name_html as output directory for split HTML instead of
manual_name or manual_name.html
* default DOCTYPE declaration changed to plain HTML5 style rather than
HTML4 DTD reference
* output only the CSS rules that are needed in an output file
. remove CSS_LINES variable and add SHOW_BUILTIN_CSS_RULES
* (custom CSS can still be output using EXTRA_HEAD)
* use <code> tag for the output of @t and @verb instead of <tt>
* use <abbr> for @acronym instead of <acronym>
* link to table of contents from short table of contents only if a
table of contents is actually output
* prefix classes from @example arguments with `user-'
* percent encode URL in @url/@uref, @email, @image and external
manual file
* new USE_XML_SYNTAX, HTML_ROOT_ELEMENT_ATTRIBUTES and
NO_CUSTOM_HTML_ATTRIBUTE variables can be used to output
valid XHTML
* systematic addition of classes attribute in HTML elements based on the
Texinfo @-command names. renaming of class attributes to avoid
confusion with @-commands formatting and describe the role in the
document rather than the formatting style.
* COPIABLE_ANCHORS renamed to COPIABLE_LINKS
* do not add a title by default; SHOW_TITLE or NO_TOP_NODE_OUTPUT has
to be set
* USE_TITLEPAGE_FOR_TITLE is now true by default
* L2H variable removed, replaced by HTML_MATH set to `l2h'
* rename OVERVIEW_LINK_TO_TOC to SHORT_TOC_LINK_TO_TOC
* rename BEFORE_OVERVIEW to BEFORE_SHORT_TOC_LINE
* rename AFTER_OVERVIEW to AFTER_SHORT_TOC_LINES
* remove PRE_ABOUT, AFTER_ABOUT, and add PROGRAM_NAME_IN_ABOUT
* remove KEEP_TOP_EXTERNAL_REF
* new variables IGNORE_REF_TO_TOP_NODE_UP, CONVERT_TO_LATEX_IN_MATH,
HTMLXREF_MODE and HTMLXREF_FILE
* DocBook output:
* do not output Top node or text before the first @node or sectioning
@-command. NO_TOP_NODE_OUTPUT can be set to false to output Top node
for now.
* replace @definfocenlose defined @-commands by the argument as-is
to be more consistent with printed output
* HTML/DocBook output:
* USE_NUMERIC_ENTITY changed to mean to use numeric entities instead
of named entities. former effect is now always on.
* ENABLE_ENCODING_USE_ENTITY variable removed. former effect is now
always off.
* Info output
* quote problematic node names (with :, comma...) by default
* new customization variable ASCII_PUNCTUATION to use plain ASCII
characters for quotation marks and a few other symbols
* texinfo.tex
* `@microtype on' uses microtypography in formatting for pdfTeX and LuaTeX
* do not ignore @part page immediately following Top node
* do `@set txicodevaristt' to get slanted typewriter for @var in code,
`@clear txicodevaristt' to use slanted, variable-width roman font for
@var everywhere. flag is @set by default, but we may turn this off
in the future.
* new file doc/texinfo-zh.tex for Texinfo documents in Chinese.
new support file doc/txi-zh.tex for Chinese. doc/short-sample-zh.texi is
a sample document.
* info
* better support for index entries containing parentheses
* better support for getting bold text etc. when displaying manpages
* bug fixed where the first index entry in a file could be ignored
* M-C-f closes as well as opens footnotes window
* do not crash if run in Brazilian Portuguese locale
* Language
* @deftype* commands use typewriter font in argument list
* new commands @latex, @iflatex, @ifnotlatex for new LaTeX output format
* do `@set txidefnamenospace' to omit space after a definition name
* Other
* build fixed for glibc 2.34
- Delete patch 13a8894fe2.patch as now part of upstream tar ball
-------------------------------------------------------------------
Wed Aug 3 08:30:34 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- In case of an update of package info: do never remove existing
info page from dir file (boo#1201852)
-------------------------------------------------------------------
Fri Jul 29 12:14:22 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- Do lua scripting only once for execute() function
-------------------------------------------------------------------
Wed Jul 27 07:39:30 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- Check for filetrigger lua scriplets if rpm.execute() as function
call is given and used this
-------------------------------------------------------------------
Tue Apr 26 13:37:31 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de>
- Add 13a8894fe2.patch
* Fixing @headings: Add missing option value 'single'.
Resolved regression where gpm could not be build.
-------------------------------------------------------------------
Mon Apr 25 10:39:55 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de>
- Update to version 6.8
* new command @displaymath for formatting of mathematical notation
* new command @example takes an argument to specify the language
* Deprecate commands: @centerchap, @definfoenclose, @refill, @inforef
* new paper size @bsixpaper
* texi2any
* should be faster as Perl XS parser is enabled by default
* SHOW_MENU customization variable replaced by FORMAT_MENU.
* only check menu structure if CHECK_NORMAL_MENU_STRUCTURE
variable is set
* MathJax support for display of math.
* JavaScript License Web Labels support
* Use sectional tables of contents instead of menus by defaut
* Use section names in links by default
* CONTENTS_OUTPUT_LOCATION sets location of table of contents
* Document sections wrapped in <div> elements
* New variable USE_NODE_DIRECTIONS to use node or section structure
for node directions
* copiable anchor links for definitions
* Don't add an extra period before file extension given as
an argument to @image if image file is not found
* info: Support compressed dir files
* texi2dvi: Stop on first error in input file
* texinfo.tex:
* put logical page numbers into PDF's ('page labels')
* put chapter numbers in the PDF outline
* new Finnish translation
- Rebased texinfo-zlib.patch
-------------------------------------------------------------------
Mon Feb 21 07:44:17 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- Split locale text-domain to take care of package info
- The package makeinfo needs both the locale text-domain of info
and makeinfo
-------------------------------------------------------------------
Fri Feb 18 13:12:44 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- Do not recommend texinfo-lang in package info anymore (boo#1196156)
- Rename texinfo-lang to makeinfo-lang as package makeinfo
uses those locale files
-------------------------------------------------------------------
Wed Feb 16 09:33:41 UTC 2022 - Dr. Werner Fink <werner@suse.de>
- The new package texinfo-lang should not include the binaries
with its helper files, therefore recreate texinfo package
- Require glibc-locale at build time as otherwise perl falls
always back to C locale
-------------------------------------------------------------------
Thu Feb 10 16:01:09 UTC 2022 - Stanislav Brabec <sbrabec@suse.com>
- Split out texinfo-lang package, so info does not refer to
traslations from texinfo package.
-------------------------------------------------------------------
Thu Sep 30 11:25:48 UTC 2021 - Dr. Werner Fink <werner@suse.de>
- Move to /usr for UsrMerge (boo#1191099)
-------------------------------------------------------------------
Thu Jan 28 14:01:49 UTC 2021 - Thorsten Kukuk <kukuk@suse.com>
- Use file requires for gzip to be able to use alternate
implementations
-------------------------------------------------------------------
Sat Oct 26 07:48:33 UTC 2019 - Andreas Stieger <andreas.stieger@gmx.de>
- update to 6.7:
* support of index subentries and sub-subentries with @subentry
* new commands @seeentry and @seealso in index entries
* UTF-8 is the default input encoding
* updates to HTML output of texi2any
* support of noderename.cnf files has been removed
* INPUT_PERL_ENCODING, INPUT_ENCODING_NAME, NODE_FILE_EXTENSION,
NODE_FILENAMES, SHORTEXTN and TOP_NODE_FILE removed as
customization variables
* TOP_NODE_FILE_TARGET now contains the extension
* texi2dvi: unconditionally run in --batch mode, ignore TeX errors
* info: for a tree search (with M-/), '}' and '{' work as well
as 'M-}' and 'M-{' to go through the results
-------------------------------------------------------------------
Thu Oct 17 07:30:27 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Delete info-dir as not required anymore
-------------------------------------------------------------------
Mon Sep 30 08:14:13 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Mark /usr/share/info/dir as %ghost
-------------------------------------------------------------------
Mon Sep 30 07:11:54 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Add a rpmlintrc file to silent useless warnings
-------------------------------------------------------------------
Fri Sep 27 14:29:01 UTC 2019 - Ludwig Nussel <lnussel@suse.de>
- use filetrigger instead of transfiletrigger
-------------------------------------------------------------------
Fri Sep 27 10:35:46 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Temporary disable %transfiletriggerin/%transfiletriggerun and
reintroduce %post/%preun with %install_info/%install_info_delete
as libzypp currentyl can not handle first case (boo#1041742)
-------------------------------------------------------------------
Fri Sep 27 08:56:50 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Fix patch texinfo-zlib.patch to enable open of compressed info
files without using a compressor utility (boo#1152105)
-------------------------------------------------------------------
Thu Sep 26 12:41:40 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- For bug boo#1152105 split of the info pages of package info to be
able to preinstall gzip before/with first install-info call
-------------------------------------------------------------------
Thu Sep 26 11:53:33 UTC 2019 - Ludwig Nussel <lnussel@suse.de>
- implement file trigger for installing and removing info pages
(boo#1152105)
-------------------------------------------------------------------
Wed Aug 28 08:24:13 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Move texindex.awk to package texinfo as texindex(1) is part of
and use this awk script
-------------------------------------------------------------------
Tue Aug 27 13:52:33 UTC 2019 - Dr. Werner Fink <werner@suse.de>
- Port the texinfo-zlib.patch to new version 6.6 to solve build problems
-------------------------------------------------------------------
Tue Aug 27 07:03:03 UTC 2019 - Martin Pluskal <mpluskal@suse.com>
- Update to version 6.6:
* Language:
. new commands @&, @ampchar{}
. @cropmarks command removed
. @ctrl is no longer recognised (it was a way to insert literal
control characters in Info files, but deprecated since the
time of Texinfo version 2)
. \usebracesinindexestrue is no longer recommended for using braces in
index entries, and has been a no-op for some time
* texi2any
. extension modules fixed to work with the "thread-safe locales" of
Perl 5.28 and newer
. some code changed to stop warnings being given by newer versions of Perl
. for HTML output, use `id' to define link targets instead of the `name'
attribute on <a>
. A native-code implementation of the Texinfo parser has been included
on an experimental basis, which makes texi2any a lot faster. Set the
`TEXINFO_XS_PARSER' environment variable to 1 to use.
. changes to HTML output:
. omit colon after node name in menus by default (use
`MENU_ENTRY_COLON' to add it back)
. no special CSS for commands like @smallexample
. new customization variable `SECTION_NAME_IN_TITLE' to use the
section name as the document <title>
. use section names instead of node names in generated menus
. pass on flags set with -D to TeX
. useless static libraries are not installed
. the newline after an @insertcopying is not output
. warning given for @multitable prototypes not in braces
. @indent and @noindent are not allowed inside the arguments to
commands where they are not meaningful
. @quote-arg and @allow-recursion are not recognised (these two used
to be recognised by makeinfo in macro definitions but were never
implemented in texinfo.tex)
. `FIX_TEXINFO' removed as a customization variable
. do not recognise or warn about obsolete customization variables
* info
. debugging output with -x is not diverted to a separate infodebug file
* Development:
. switch from Subversion to git
- https://savannah.gnu.org/git/?group=texinfo
. automake 1.16
- Drop no longer needed patch:
* perl-5.28-fixes.patch
-------------------------------------------------------------------
Tue Dec 11 11:49:21 UTC 2018 - Dominique Leuenberger <dimstar@opensuse.org>
- Update perl-5.28-fixes.patch: Update locale handling for Perl 5.28.
Perl 5.28 introduced thread-safe locales, where setlocale()
only affects the locale of the current thread. External code
like mbrtowc(3) isn't aware of this thread specific locale,
so we need to explicitly modify the global one instead.
-------------------------------------------------------------------
Thu Nov 22 17:59:13 UTC 2018 - Jan Engelhardt <jengelh@inai.de>
- Use noun phrase for summaries.
-------------------------------------------------------------------
Tue Oct 30 13:15:15 UTC 2018 - Dr. Werner Fink <werner@suse.de>
- Add patch perl-5.28-fixes.patch to get build cehck working again
due broken perl API with perl 5.28 and up (boo#1113945)
-------------------------------------------------------------------
Fri Apr 6 09:02:47 UTC 2018 - adam.majer@suse.de
- install-info_exitcode.patch: install-info needs to return success
when it does nothing. We need 0 return value even on failure as
old packages in SLE-11 and SLE-12 can become uninstallable.
(bsc#1084997)
-------------------------------------------------------------------
Fri Feb 23 08:34:56 UTC 2018 - fvogt@suse.com
- Use %license (boo#1082318)
-------------------------------------------------------------------
Fri Jan 26 17:10:31 UTC 2018 - werner@suse.de
- Do not require bash for package info (boo#1077744)
-------------------------------------------------------------------
Thu Jan 4 14:18:03 UTC 2018 - mpluskal@suse.com
- Update to version 6.5:
* info:
+ some bugs fixed:
a bug where a segfault could happen in the regex search, for
example when the user entered a single \ as the search string
+ another bug which could make nodes inaccessible in long
"split" info files
+ a bug where it was not possible to follow a cross-reference
that was split across more than one line has been fixed
+ do not fall back to a man page if following a cross-reference
in an info file failed
+ if looking for a file failed, do not convert the name of a
file to lower-case and look for it again
* texinfo.tex
+ some faulty definitions for Unicode characters have been
changed or removed
+ fix indentation in table of contents for entries that are
split across multiple lines
* texi2dvi
+ a bug that broke the processing of LaTeX files that did not
use BibTeX has been fixed
* texi2any
+ output the encoding declaration of a HTML file earlier so it
will always occur within first 1024 bytes of file
+ `INLINE_INSERTCOPYING' removed as a customization variable
-------------------------------------------------------------------
Mon Oct 9 07:20:30 UTC 2017 - werner@suse.de
- Avoid also provide libtool() on texinfo specific perl linkage
-------------------------------------------------------------------
Sat Oct 7 12:35:18 UTC 2017 - coolo@suse.com
- Drop require on perl(Locale::Messages) as long as we bundle
perl-libintl-perl (the system one leaves tests failing)
-------------------------------------------------------------------
Sat Oct 7 08:31:43 UTC 2017 - coolo@suse.com
- Do not provide perl() - the modules are not globally available
(bsc#1062028)
-------------------------------------------------------------------
Wed Oct 4 08:41:08 UTC 2017 - dimstar@opensuse.org
- Change perl requires to be exactly the perl version makeinfo was
built against. We ship a perl loadable module which is hard
linked to the right version.
-------------------------------------------------------------------
Wed Jul 12 12:48:12 UTC 2017 - mpluskal@suse.com
- Update to version 6.4:
* texi2any:
+ for HTML output, place section names before the manual in page
titles, instead of after them, so it is easier to distinguish pages
if titles are truncated
+ starting points for ordered lists beginning with 0 or a letter of
the alphabet are output as attributes on the <ol> tag, as was
case for Texinfo 4.13 and earlier
+ a bit faster
+ some discrepancies in paragraph formatting between Perl extension
modules and interpreted Perl modules have been fixed
+ `MACRO_BODY_IGNORES_LEADING_SPACE' customization variable removed,
and `indent_menu_descriptions' is no longer a possible value for
`TREE_TRANSFORMATIONS' (as these features did not work as
documented)
* info:
+ the `up-line' and `down-line' commands now are like the other
scrolling commands and are no longer confined to a single node
(depending on the value of `scroll-behaviour')
+ supplying the --all option with --index-search displays a list
of matching index entries
+ the style variables like `link-style' can now be set while info
is running
+ display bug fixed where color could be turned off prematurely
+ several other bugs fixed
+ better portability in test suite
+ do not fall back to showing the dir node if a manual isn't found
+ Do not attempt any kind of conversion of CR LF line endings,
except on MS-DOS/Windows, when it is done unconditionally. (This
replaces a more complicated approach, where this conversion would
take place if there was a problem finding a node in a file.) The
main effect of this change is that Info files with CR LF line
endings, which would have been produced on MS-DOS/Windows with old
versions of makeinfo, are only supported on such operating systems.
+ a few of the key bindings under --vi-keys have been changed for
consistency or to match the documentation
* texinfo.tex
+ a DVI file with a single empty page can be output again, which
restores the behavior from Texinfo 6.0 and earlier
- Small packaging clenup:
* Drop conditions for old releases
* Run spec-cleaner
* Run testsuite
-------------------------------------------------------------------
Fri Jan 20 10:02:38 UTC 2017 - rmaliska@suse.com
- Update to version 6.3:
* Language:
+ The commands `@setcontentsaftertitlepage' and
`@setshortcontentsaftertitlepage' have been removed.
+ @-commands are no longer supported within `@errormsg'.
* texinfo.tex:
+ For a couple of characters (opening and closing braces), use glyphs
from the standard TeX math fonts instead of using EC fonts which are
less likely to be installed.
+ Use of user-defined macros in the text of an index entry is more
reliable when the text contains Texinfo @-commands.
+ @synindex and @syncodeindex have been fixed (broken in the last
release).
+ Support added for native UTF-8 support with XeTeX and LuaTeX.
+ Support of PDF output with XeTeX improved.
+ You can use a new file doc/texinfo-ja.tex for Texinfo documents in
Japanese. doc/short-sample-ja.tex is a sample document. New
support file doc/txi-ja.tex for Japanese.
+ texi2any:
+ Fix handling of compiler options when building Perl extension modules.
* texi2dvi:
+ Can now process files whose absolute paths contain space characters,
as long a relative path to the file is given. Better support of
files with unusual characters in their names.
+ No longer exits prematurely in some circumstances (due to the script
running under "set -e").
+ Bug fixed which made the `--command' and `--tidy' options
incompatible.
* info:
+ Handling of "invalid" value in infokey file fixed.
-------------------------------------------------------------------
Sun Jul 24 16:11:18 UTC 2016 - p.drouand@gmail.com
- Remove libpth-devel; texinfo doesn't depend on it
-------------------------------------------------------------------
Fri Jul 15 18:05:00 UTC 2016 - schwab@linux-m68k.org
- Update to 6.1
* Language:
. You can now omit the @menu from nodes with other nodes below them in
the document structure. If you use "@validatemenus off" near the
start of a Texinfo file, makeinfo will, where needed, create a menu
for nodes lacking one given explicitly.
. An @setfilename line is no longer required at the start of a
Texinfo file. (Be aware, though, that some other tools may require
it, for example Automake.)
. For processing with TeX, a comma is automatically provided following
a cross-reference command (such as @xref) when needed to separate
the page number from following text, so you don't need to add one
yourself. See the `Parts of a Cross Reference' node in the manual
for details. Behavior when followed by punctuation, as always
recommended previously, is unchanged.
* texi2any:
. Some Perl modules have been rewritten in C to increase speed.
If Perl extensions can be created, they are used by default;
otherwise the pure Perl implementations are still used.
Disable at build time with "configure --disable-perl-xs". The
environment variable TEXINFO_XS controls how they are used by
texi2any.
. Quotation marks are left out for node names and index entries in
Info output where they would have been produced by commands such
as @file or @option.
. New customization variable INFO_SPECIAL_CHARS_QUOTE to allow use of
a quoting mechanism for problematic constructs in Info output, for
example node names containing colons or commas.
. Commands like @heading are affected by @lowersections and @raisesections
again, as was the case before Texinfo 5.0.
* texinfo.tex:
. You may explicitly specify a sort key for an index entry by preceding
the text of the entry with the @sortas commmand with the sort key
desired as a braced argument. Additionally, you may choose to
ignore all occurences of the characters \, @, <, and - using new
flags you can specify with @set: `txiindexbackslashignore',
`txiindexatsignignore', `txiindexlessthanignore', and
`txiindexhyphenignore' respectively.
. Changes to macro handling to more closely match makeinfo. Ends of
lines are preserved in an argument to a macro taking a single
argument.
. By default, suppress heading line on a page with a chapter on it, to
avoid having the chapter title repeated.
. Use a larger font for arguments in a @deffn line and similar.
. The default indices (cp, ky and so on) now don't get a file opened
for them unless they are actually used. This reduces the number of
files that a run of TeX produces, and also allows for a greater
number of user-defined indices, because you will not bump into TeX's
limit of 16 open files at once so soon.
. For initials in indices that are non-alphanumeric characters (for
example, backslash, or braces), avoid use of a typewriter font.
This gives a more consistent appearance.
. Have a stronger preference for breaking a column in an index before
a letter heading.
. Formatting improvements in tables of contents and indices. Entries
can extend slightly into the margin instead of being broken across
two lines, and text is split more evenly across lines. Reduce
chance of an orphaned index entry appearing at the top of a column.
. Support character encodings beyond ASCII for XeTeX and LuaTeX by
reading file input byte-by-byte.
* texi2dvi:
. Support for determining the output files using the `-recorder'
option to TeX, to help to support more TeX engines.
* info:
. New user variables `link-style', `active-link-style', and
`match-style' enable customization of how cross-references and search
matches are highlighted.
. By default only the node pointers are displayed at the top of a node.
Customize this with the `nodeline' variable.
. New command M-x tree-search to search all subnodes of a node.
. Now tries to find referenced manuals in the same directory as the
current file first, before looking in search path. Customize this
with new variable `follow-strategy'.
. The `mouse' variable is now off by default, in order not to
interfere with the selection of text in a terminal emulator window.
. `q' closes a window instead of quitting altogether if there's more
than one, for example if a help window is open.
. Several bug fixes, including:
. one causing the wrong position in a node to be shown when
following an "anchor" cross-reference
. one causing a test failure in the t/c-u-m-x-scroll-forward.sh
test on some platforms
. Internal changes to reduce memory use and increase speed of
searches, relative to last release
. The meaning of the `key-time' variable has changed when its value
is 0. This value meant to wait forever in the last release, but now
it means that the next byte must be available immediately.
* Documentation:
. The `info.info' file (and `info.texi' source) is no longer
distributed with Texinfo. Now this manual is only in Emacs.
-------------------------------------------------------------------
Thu Oct 15 19:44:20 UTC 2015 - werner@suse.de
- Package info.info that is revert the previous drop from
Mon May 6 16:05:29 UTC 2013
-------------------------------------------------------------------
Wed Jul 15 11:13:20 UTC 2015 - werner@suse.de
- The package texinfo now requires makeinfo of the same version
to make sure that the correct Texinfo.pm is installed
- libzio is able to handle lz(ma) and xz files as well
-------------------------------------------------------------------
Sat Jul 11 10:14:57 UTC 2015 - mpluskal@suse.com
- Update to 6.0
* Language:
+ new commands @sub and @sup, for textual subscripts and
superscripts.
+ new command @U to insert a Unicode character by code point.
* texinfo.tex:
+ @url/@uref output in PDF now the same as in DVI, showing the
url even if the second argument is given, not just as a link
target. TeX option \urefurlonlylinktrue gives previous
behavior, of invisible urls.
+ PDF-only \linkcolor and \urlcolor specify colors (default
black).
* texi2any:
+ customization variable TOP_NODE_UP_URL now replaces all (dir)
references; recommended setting for GNU packages is /manual/.
+ new customization variable INDEX_SPECIAL_CHARS_WARNING to
complain when index entries contain a colon.
+ Docbook output no longer uses <lineannotation> for @r.
+ -D'var val' on the command line works as intended again.
+ --plaintext output can be split.
+ a bit faster.
* info:
+ invoking as `info foo bar' looks for bar as an index entry
in manual foo, if not found as a top-level menu item.
+ invoking info with an absolute or explicitly relative file
name (./foo.info, /tmp/foo.info, etc.) just visits that file.
+ separate `infokey' program has been removed - the .infokey
file is now read directly by Info.
+ new option --init-file allows overriding ~/.infokey.
+ new variable `highlight-searches' allows highlighting
results from a search
+ support for mouse scrollwheel, controlled by `mouse'
variable.
+ new variable `key_time' to control how long to wait for
byte sequences sent by special keys.
+ new variable `hide-note-references' alters appearance of
displayed nodes
+ new variable `infopath-no-defaults' allows omitting the
compile-time Info directory from the Info search path.
+ support input of multibyte characters for searches in
a UTF-8 locale.
+ if reading an Info file that is known to be in a different
character encoding to that of the user's environment,
convert its contents when displayed and substitute
missing characters
+ new command M-x info-version.
+ the M-x kill-node command has been removed.
+ test suite at build time.
* texindex:
+ completely new implementation as a literate program using
Texinfo and (portable) awk (called TexiWeb Jr.).
+ the -o (--output) is not supported, unless we hear of
someone using it.
+ duplicated sort keys with different display texts result
in one merged index entry, using the first display text.
+ better sorting and parsing in unusual cases; most
notably, { and } characters can appear as initials.
* install-info:
+ handle compressed input file names containing spaces.
+ exit successfully if --remove is given and the dir file
does not exist.
+ new option --defsection, to be used instead of
"Miscellaneous" when a section is not present in the Info
file.
* texi2dvi:
+ look for the environment variable THUMBPDF_CMD instead of
THUMBPDF, since thumbpdf itself has used THUMBPDF for options
since 2000.
+ remove --recode and --recode-from options, since they haven't
worked as intended for years, so evidently no one needs them.
- refresh texinfo-zlib.patch
-------------------------------------------------------------------
Sat May 16 06:20:05 UTC 2015 - schwab@linux-m68k.org
- Remove wrong uses of %install_info
-------------------------------------------------------------------
Fri Apr 24 10:05:14 UTC 2015 - werner@suse.de
- Add pre requires for install_info for scriptlets
-------------------------------------------------------------------
Sat Mar 28 11:31:48 UTC 2015 - mpluskal@suse.com
- Add gpg signature
-------------------------------------------------------------------
Fri Feb 6 17:51:37 UTC 2015 - dimstar@opensuse.org
- Add perl(Locale::Messages) and perl(Text::Unidecode) Requires to
makeinfo: since the switch to using the external ones, we also
must ensure to have them present for the user to execute
makeinfo. And makeinfo can be installed without texinfo (which
already does require those modules too).
-------------------------------------------------------------------
Fri Feb 6 15:58:27 UTC 2015 - werner@suse.de
- Avoid including builtin perl-libintl-perl but require the package
- The same for perl-Text-Unidecode
- Move %install_info_delete from %postun to %preun
-------------------------------------------------------------------
Fri Feb 6 11:12:09 UTC 2015 - dimstar@opensuse.org
- Recommend instead of Require texi2html and texi2roff: they are
not stricly required to operate texinfo, but can be valuable to
the users installing it.
-------------------------------------------------------------------
Thu Feb 5 20:23:34 UTC 2015 - dimstar@opensuse.org
- Completely splitt off texi2html and texi2roff into their own
package containers. As a consequence, we no longer carry those
files / patches here (they live in their respective other
packages): texi2html-1.78.dif, texi2html-5.0.tar.bz2,
texi2html-5584.patch, texi2html.changes, texi2html.spec,
texi2roff-2.0-gcc4.patch, texi2roff-2.0.dif, texi2roff-2.0.tar.gz,
texi2roff.changes, texi2roff.patch.gz and texi2roff.spec.
-------------------------------------------------------------------
Fri Sep 12 13:45:49 UTC 2014 - werner@suse.de
- Be aware that texinfo is GPL-3.0+
- Require texi2html as well as readded texi2roff to make the build
system happy
-------------------------------------------------------------------
Wed Aug 6 18:32:36 UTC 2014 - dmitry_r@opensuse.org
- Update to version 5.2
* New texinfo commands
* texi2any is the new generic converter for Texinfo that can
produce all supported output formats, both those from texi2dvi
(PDF/DVI) and from makeinfo (Info/HTML/etc.). texi2any and
makeinfo are now different names for the same program; there
are no differences in behavior based on the program name.
* See more detail at included NEWS file
* Remove obsolete texinfo-4.12.dif
* Remove obsolete texi2html-1.78.dif
* Remove obsolete texi2roff-2.0.dif
* Remove obsolete texi2roff.patch.bz2
* Remove obsolete texinfo-4.8-echo.patch
* Remove obsolete texi2roff-2.0-gcc4.patch
* Remove obsolete texinfo-4.13a-bug640417.diff
* Remove obsolete texinfo-4.13a-bug713517.diff
* Remove obsolete automake-1.12.patch
* Remove obsolete texinfo-4.13a-bug788574.diff
* Remove obsolete config-guess-sub-update.patch
* Rebase texinfo-4.12-zlib.patch to texinfo-zlib.patch
- Merge makeinfo into main package
- Drop not maintained texi2roff
- Drop not maintained texi2html
-------------------------------------------------------------------
Mon May 6 16:05:29 UTC 2013 - schwab@linux-m68k.org
- Don't package info.info, already part of emacs-info
-------------------------------------------------------------------
Tue Feb 12 09:35:09 UTC 2013 - schwab@suse.de
- config-guess-sub-update.patch:
Update config.guess/sub for aarch64
-------------------------------------------------------------------
Tue Nov 20 10:02:54 UTC 2012 - werner@suse.de
- Use latest CVS version for the last patch
-------------------------------------------------------------------
Mon Nov 19 14:24:06 UTC 2012 - werner@suse.de
- Be aware that characters of appendix numbering requires a ASCII
null if used as string (bnc#788574)
-------------------------------------------------------------------
Sat Oct 6 06:18:21 UTC 2012 - coolo@suse.com
- remove prereq on library names
-------------------------------------------------------------------
Tue Jul 17 16:11:16 UTC 2012 - werner@suse.de
- Split off makeinfo as separate package to independed from
TeXLive
-------------------------------------------------------------------
Tue Jul 10 10:09:15 UTC 2012 - werner@suse.de
- Make it build with latest TeXLive 2012 with new package layout
+ Add missed TeX
+ Also bibtex and makeindex are used by texi2dvi
+ Add some requires to make the texi2* scripts work
-------------------------------------------------------------------
Tue May 29 13:37:27 UTC 2012 - puzel@suse.com
- fix build with automake-1.12
- add: automake-1.12.patch
-------------------------------------------------------------------
Wed Feb 8 12:35:24 UTC 2012 - werner@suse.de
- Work around dully check script of obs
-------------------------------------------------------------------
Thu Dec 1 16:06:36 UTC 2011 - coolo@suse.com
- add automake as buildrequire to avoid implicit dependency
-------------------------------------------------------------------
Fri Sep 2 10:28:21 UTC 2011 - werner@suse.de
- Fix UTF-8 range problem of a grep call (bnc#713517)
-------------------------------------------------------------------
Mon May 2 12:58:41 CEST 2011 - ke@suse.de
- Enhance package description and provide meta info about makeinfo; thus
you can find this tool more easily with the yast package search..
-------------------------------------------------------------------
Wed Nov 10 14:28:49 CET 2010 - meissner@suse.de
- SUSE_ASNEEDED=0 to fix PowerPC build (optimizes
away the -lz -lbz2 otherwise)
-------------------------------------------------------------------
Wed Sep 22 09:04:35 UTC 2010 - giecrilj@stegny.2a.pl
- Fix variable types (bnc#640417)
-------------------------------------------------------------------
Mon Jun 28 06:38:35 UTC 2010 - jengelh@medozas.de
- use %_smp_mflags
-------------------------------------------------------------------
Sun Dec 6 14:58:06 CET 2009 - jengelh@medozas.de
- enable parallel building
-------------------------------------------------------------------
Wed Aug 26 12:53:54 CEST 2009 - mls@suse.de
- make patch0 usage consistent
-------------------------------------------------------------------
Fri Jul 3 12:10:18 CEST 2009 - werner@suse.de
- Add provides for texi2html and texi2roff (bnc#469300)
- Update to texi2html 1.82 (2009-01-05)
* Add new hooks for user functions, for simple @-commands, and at the start and
end of special regions.
* Don't use unidecode on unicode characters that are known not to have a good
transliteration. This corresponds with characters with an @-command that
don't have a transliteration, like @exclamdown...
* handle @alias, @quote*, @guillem*, @textdegree, @allowcodebreaks,
@fonttextsize, @hyphenation, @click, @clickstyle, @click, @arrow,
@clicksequence, @geq, @leq, @*headingmarks, @*footingmarks, @smallquotation,
@ogonek.
Handle @columnfractions and row prototypes in @multitable better.
* @documentlanguage is used to set the language each time it is seen (except
if the language was set on the command line).
* new option --css-ref, generate reference to a CSS URL.
* new option --transliterate-file-names, produce file names in ASCII
transliteration (set in the default case).
* --no-monolithic is reenabled.
* @, followed by an argument without brace is now handled. Report from
Jorge Barros de Abreu.
* @, is kept with --macro-expand.
* @math is more compatible with makeinfo/texi2dvi when no external program
is used. Using tex4ht for html generation should also lead to a correct
result.
* Handle right @end block commands followed by something else than a
spacing character.
* Remove trailing end of line in @html block.
* @itemize should produce bullets by default. Report from Reinhold Kainhofer.
* handle frame files like other files. Report from Reinhold Kainhofer.
- Update to texinfo 4.13a (18 September 2008)
* A reference card for Texinfo is now available, in doc/refcard. For
convenience, preformatted PDF's for letter-size and A4 paper are included.
* makeinfo:
. new option --internal-links for HTML output, to write a tsv file
mapping indexed/toc terms to links, for easy reference from external
documents.
. - as an input file name reads standard input.
* info:
. support for multibyte encodings such as UTF-8.
. new option --show-malformed-multibytes, to display malformed multibyte
sequences.
. new environment variable INFO_MAN_COMMAND sets the name of man binary
(use it if you a need to override PATH settings).
* install-info:
. bug fix: support names with embedded periods (e.g., config.status) again.
* Distribution:
. autoconf 2.63.
-------------------------------------------------------------------
Sun Jun 15 13:50:57 CEST 2008 - schwab@suse.de
- Update to texinfo 4.12.
* Language:
. new commands @clicksequence, @click, and @clickstyle for documenting
GUI sequences, and @arrow for the default glyph used.
. new commands @geq{} and @leq{} for the normal >= and <= relations.
* install-info:
. lzma compression supported.
. Much work towards compatibility with Debian's independent
implementation. Changes in behavior:
- new entries are formatted to start at column 34 by default.
- existing entries are replaced by default.
- new sections are alphabetized among existing sections.
- if an entry being removed is the last one in a section, the
section is also removed.
. Also many new options:
--section REGEX TITLE.
--no-indent: disable formatting of new entries.
--menuentry, --name: specify left-hand side of an entry.
--dry-run: alias for --test.
--regex REGEX: renamed from --section regex, adds to all sections
matching REGEX by default.
--add-once: add only to first specified or matching section.
--align COL: start description at column COL.
--calign COL: start continuation lines in description at COL.
--max-width COL: wrap the description at COL.
. New section in the Texinfo manual describing all this.
* Info:
Our goal with these changes to the default interface is to make Info
documents more easily and quickly readable, especially by non-experts.
. the PageUp and PageDown keys move through the whole document by
default, instead of just the current node.
. the h command shows the basic help, and H starts the Info tutorial.
. the newly-bound x command deletes the current window, e.g., within help.
. the scroll-step variable is set to 1 by default, for smooth scrolling.
. the cursor-movement-scrolls-p variable is set to 1 by default, so
link searches look through the whole document.
. regular expression searches are supported, and are the default for
both regular and incremental searches.
. the new R command toggles between regexp and literal-string searches.
. the new variable scroll-last-node controls scrolling at the end of
the last node; by default, it now simply reports there are no more
nodes. To restore the old behavior, set scroll-last-node=Scroll.
. the precise line number specified in index entries is used if available.
. --usage=info shows usage for standalone Info.
. lzma compression supported.
* Distribution:
. language support for no removed/renamed to nb, per Norwegian translators.
. new translation: es.
. bug fixes in make check (and elsewhere).
. gettext 0.17, automake 1.10.1, autoconf 2.62.
-------------------------------------------------------------------
Mon Mar 10 13:33:18 CET 2008 - werner@suse.de
- Update to texinfo version 4.11 (4.10 was omitted)
* Language:
. @documentlanguage now supports an optional country code
specification after the language code, a la gettext.
. new command @allowcodebreaks controls breaks at _ and - within @code.
. new command @frenchspacing controls spacing after sentences.
. new command @fonttextsize allows changing body text font size to 10pt.
. new command @textdegree{} produces the normal degrees symbol.
. new command @thischapternum can be used in TeX headers/footers.
. new commands for quotes: @quotedblleft @quotedblright
@quoteleft @quoteright @quotedblbase @quotesinglbase
@guillemetleft @guillemetright @guilsinglleft @guilsinglright.
. new option @set txicodequoteundirected produces an undirected quote
in code and example output, instead of the regular right quote.
. new option @set txicodequotebacktick produces a grave accent in
code and example output, instead of the regular left quote.
* makeinfo:
. The @documentlanguage locale is used to translate various document strings.
. --enable-encoding is now the default, meaning Info and plain text
output use 8-bit characters given a supported @documentencoding.
. new option --css-ref=URL for creating a stylesheet <link> in HTML output.
. new option --transliterate-file-names to use a reduction-to-ASCII
algorithm for split HTML file names, useful for non-Latin-based languages.
. @enddots{} outputs three dots instead of four, for consistency with
texinfo.tex.
. the Local Variables coding: setting written by --enable-encoding now
comes at the very end, after the tags table, so that Emacs can find
it in more cases.
. @allow-recursion (never documented) is deprecated and produces a warning.
. @quote-args (never documented) is now the default behavior.
. centering and such take account of character widths.
. the --reference-limit option is now a no-op.
. improvements to XML and Docbook output and the DTD.
* texinfo.tex:
. @thissection can now be used in custom headings, and @thischapter
works reliably even without @set chapternewpage. Custom headings
have additional flexibility as well.
* texi2dvi:
. pdftexi2dvi is a new wrapper to `texi2dvi --pdf', equal to texi2pdf,
for the sake of AUC-TeX which prepends `pdf' to the compilation
command when requested to produce PDF.
* info:
. look for info files in the current directory first, by default.
. when calling man, use -a if no explicit section is found.
. avoid showing the top(1) man page for nonexistent info files.
* install-info:
. new options --section-regex, --remove-exactly, --debug, --test.
* Distribution:
. autoconf 2.60, automake 1.10, gettext 0.16.1.
. gettext support now [external].
. new translations: hu (Hungarian), rw (Kinyarwandan), vi (Vietnamese).
. most common sources imported from gnulib.
-------------------------------------------------------------------
Wed Jul 11 13:13:29 CEST 2007 - werner@suse.de
- Update to texinfo version 4.9
* GPLv3.
* texi2dvi:
. new mode --build=tidy which supports compilation in a separate
directory, where intermediate files are preserved.
. new option --build-dir, to specify where the tidy build will take
place, either locally or globally. This allows avoiding the clutter
while preserving auxiliary files.
. new support for AUC-TeX: texi2dvi (weakly) supports arguments a la
TeX such as `\nonstopmode\input{file.tex}'.
. new options --ps and --dvipdf, useful especially for pstricks documents.
. new option --src-specials, passed to TeX.
. pdftexi2dvi is a new wrapper to `texi2dvi --pdf', equal to texi2pdf,
for the sake of AUC-TeX which prepends `pdf' to the compilation
command when requested to produce PDF.
* texinfo.tex:
. Latin1, Latin2, Latin9, and UTF-8 are supported as well as Computer
Modern can manage.
. png and jpg images supported in pdf output.
. new Russian, Serbian, and Ukrainian translations for texinfo.tex:
txi-ru.tex, txi-sr.tex, txi-uk.tex.
. section names with \ characters work properly in pdf outlines.
. have .toc files use @ as the escape character, instead of \.
- Update to texi2html version 1.78
* Transliterate accented characters in file names. Use Text::Unidecode
if detected.
* Handle @frenchspacing, @tie, @indent, @setcontentsaftertitlepage,
@setshortcontentsaftertitlepage and the obsolete @allow-recursion
and @quote-arg.
* With book style the Table of Contents is put where it is set.
* Use more numeric entities, especially for accented letters.
* The `examples' directory now contains an init file for Mediawiki output.
Mediawiki is the GPL'd wiki used by Wikipedia.
* new init file tex4ht.init. With this init file, httex or htlatex from
tex4ht is used to format @tex and @math.
* Init files now have a chance to override all file names, rather than just
page names.
* Put the images under a double licence by adding back their original GPL
licence.
* If SIMPLE_MENU is true the menu is simply enclosed in a preformatted
environment.
* The user can bypass the texi2html functions and provide his own function
to do things similar that what is done for interfacing with LaTeX2HTML
or tex4ht.
* LaTeX2HTML stuff is moved out of texi2html.pl, to T2h_l2h.pm.
* Add $USER and $DATE variables to override the defaults detected for the
footer.
* $TOP_FILE and $TOC_FILE are only set if set by the user. The elements
file names are in the hash reference $Texi2HTML::THISDOC{'filename'}
for use in init files.
* The API for image, normal_text, paragraph and node_file_name has changed.
* The $ENCODING variable is deprecated, replaced by $ENCODING_NAME
and $OUT_ENCODING.
* utf8 is used as default out file encoding. This should allow for utf8
translations for languages which cannot use @-commands for non ascii
characters.
* Use entities for ``, '', ---, -- and quotes used for some formatting
@-commands if $USE_ISO is set.
* don't set unset MENU-ENTRY-NAME if it is similar with the NODE-NAME,
it is useless as it is a construct that shouldn't happen.
* avoid menu entry and description redundancy in the formatting function
and not in the main program.
* accept - in @-command names (compatibility with makeinfo)
* in user-defined macro arguments a comma in brace is escaped (compatibility
with makeinfo from texinfo 4.8.90)
* don't add the section title to the html title when the document isn't split
* When the file extension is set to the empty string, a trailing `.' will not
be automatically added to file names.
* The texi2html script is now created by make and not configure.
* It is possible to build the translation files from outside of the
build directory.
* When configure detects that no Data::Dumper is present, the build scripts
will simply copy the files instead of breaking.
* remove handling of quotation second arg, quotation has only one arg.
* handle nested ifset/ifclear.
* Improved handling of @sc and @centerchap.
* More flexible normal_text.
* style_stack really contains the formatting @-commands.
* caching of html generated by latex2html reenabled.
* when not split and no section navigation is output, the about page and
navigation direction are not output for all the elements.
-------------------------------------------------------------------
Mon Mar 26 11:43:30 CEST 2007 - rguenther@suse.de
- Add libbz2-devel, ncurses-devel and zlib-devel BuildRequires
- Exchange libzio for libzio-devel BuildRequires
-------------------------------------------------------------------
Mon Feb 19 15:01:24 CET 2007 - werner@suse.de
- Avoid array subscript below array bounds (bug #246740)
-------------------------------------------------------------------
Fri Nov 10 14:07:28 CET 2006 - werner@suse.de
- Fix buffer overflow in texi2dvi (bug #214920)
-------------------------------------------------------------------
Mon Jul 24 17:39:22 CEST 2006 - adrian@suse.de
- add libzio as PreReq for info
-------------------------------------------------------------------
Fri Jun 16 12:55:22 CEST 2006 - werner@suse.de
- Re-enable texi2pdf because now tetex does not install this
-------------------------------------------------------------------
Wed Jan 25 21:31:01 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Mon Dec 19 13:17:13 CET 2005 - werner@suse.de
- Add missing sym link to file list
-------------------------------------------------------------------
Thu Oct 6 16:48:27 CEST 2005 - werner@suse.de
- Use directory for the base of temporary index files (bug #120577)
-------------------------------------------------------------------
Thu Mar 24 16:19:16 CET 2005 - uli@suse.de
- fixed to build with GCC4
-------------------------------------------------------------------
Thu Feb 10 15:25:59 CET 2005 - werner@suse.de
- Update to next bug fix release 1.76 of texi2html
-------------------------------------------------------------------
Tue Feb 1 11:51:02 CET 2005 - werner@suse.de
- Update to bug fix release 1.74 of texi2html
-------------------------------------------------------------------
Thu Jan 27 18:29:08 CET 2005 - werner@suse.de
- Fix texi2html to not loop around on broken texi files
- Remove texi2pdf from texinfo file list due already part of
tetex
-------------------------------------------------------------------
Wed Jan 26 16:29:38 CET 2005 - schwab@suse.de
- Reenable strict aliasing.
-------------------------------------------------------------------
Tue Jan 25 18:17:36 CET 2005 - werner@suse.de
- Move texi2html version to 1.72
- Update texinfo version to 4.8
-------------------------------------------------------------------
Tue Oct 19 00:37:10 CEST 2004 - ro@suse.de
- drop no locale support, nb is already there
-------------------------------------------------------------------
Mon Aug 9 18:14:05 CEST 2004 - werner@suse.de
- Info: check remaining buffer size before printing into echo area
-------------------------------------------------------------------
Fri Jul 2 18:50:42 CEST 2004 - mfabian@suse.de
- apply makeinfo.patch received from Karl Berry
<karl@freefriends.org> fixing the problem that makeinfo 4.7
could not process groff.texinfo anymore. See
http://lists.gnu.org/archive/html/bug-texinfo/2004-04/msg00026.html
http://article.gmane.org/gmane.comp.tex.texinfo.bugs/2019/
-------------------------------------------------------------------
Wed Apr 21 13:02:06 CEST 2004 - werner@suse.de
- Use libzio together with zlib and libbz2 to support bz2 info
files to avoids pipe()/fork()/execve() calls in install-info.
-------------------------------------------------------------------
Mon Apr 19 13:26:26 CEST 2004 - werner@suse.de
- Be sure that texi2html find all required tools
-------------------------------------------------------------------
Fri Apr 16 16:30:44 CEST 2004 - werner@suse.de
- Update to texinfo 4.7
- Use -fno-strict-aliasing
-------------------------------------------------------------------
Sun Mar 14 15:02:52 CET 2004 - schwab@suse.de
- Fix uses of snprintf and gzFile.
-------------------------------------------------------------------
Sat Jan 10 21:27:05 CET 2004 - adrian@suse.de
- build as user
-------------------------------------------------------------------
Wed Dec 10 13:27:29 CET 2003 - werner@suse.de
- Update to texinfo 4.6
-------------------------------------------------------------------
Wed May 21 01:40:10 CEST 2003 - ro@suse.de
- fix filelist: package files in /usr/share/texinfo
-------------------------------------------------------------------
Thu Apr 24 12:20:23 CEST 2003 - ro@suse.de
- fix install_info --delete call and move from preun to postun
-------------------------------------------------------------------
Sun Mar 9 23:03:00 CET 2003 - kukuk@suse.de
- Add zlib to info PreRequires [Bug #24954]
-------------------------------------------------------------------
Tue Feb 11 11:21:41 CET 2003 - kukuk@suse.de
- Branch off info sub package
- Add /usr/share/info/dir
-------------------------------------------------------------------
Sat Feb 8 10:55:18 CET 2003 - kukuk@suse.de
- Remove PreRequire for gzip, link against zlib instead (patched
based on version from RH)
-------------------------------------------------------------------
Sat Feb 8 01:38:58 CET 2003 - ro@suse.de
- fixed pre/post install scripts
-------------------------------------------------------------------
Fri Feb 7 12:11:37 CET 2003 - ro@suse.de
- removed self-prereq again
-------------------------------------------------------------------
Thu Feb 6 18:09:27 CET 2003 - aj@suse.de
- Use install_info.
- Update to texinfo 4.5.
-------------------------------------------------------------------
Wed Jan 22 17:15:34 CET 2003 - werner@suse.de
- Request gzip before installing (bug #22992)
-------------------------------------------------------------------
Fri Aug 30 13:48:24 CEST 2002 - werner@suse.de
- Add a warning on missed programs and say what todo (bug #18642)
-------------------------------------------------------------------
Mon Jun 17 10:42:45 CEST 2002 - schwab@suse.de
- Update to texinfo 4.2.
-------------------------------------------------------------------
Thu Mar 7 14:35:27 CET 2002 - schwab@suse.de
- Update to texinfo 4.1.
-------------------------------------------------------------------
Wed Feb 13 22:34:05 CET 2002 - schwab@suse.de
- Fix verbose message of texi2dvi.
-------------------------------------------------------------------
Thu Jan 24 13:43:25 CET 2002 - okir@suse.de
- fixed tempfile races in texindex (moved all tempfiles
into a subdirectory of /tmp).
-------------------------------------------------------------------
Wed Jan 16 15:33:00 CET 2002 - schwab@suse.de
- Fix bad free in "makeinfo --html".
-------------------------------------------------------------------
Tue Jun 12 11:21:19 CEST 2001 - schwab@suse.de
- Fix directive inside macro call.
-------------------------------------------------------------------
Thu Apr 12 18:48:02 CEST 2001 - werner@suse.de
- Use CVS snapshot of texi2html which works on glibc texinfo code
-------------------------------------------------------------------
Thu Apr 12 02:30:10 CEST 2001 - ro@suse.de
- fixed glossary for texi2html
-------------------------------------------------------------------
Wed Apr 11 17:52:18 CEST 2001 - werner@suse.de
- Update of texi2html and texi2roff
-------------------------------------------------------------------
Thu Sep 28 18:05:30 CEST 2000 - werner@suse.de
- Move /usr/bin/install-info to /sbin/install-info and
set backward compatibility symlink.
-------------------------------------------------------------------
Wed May 31 16:11:53 CEST 2000 - werner@suse.de
- use rpm macros for common paths
-------------------------------------------------------------------
Mon Feb 28 21:27:24 CET 2000 - werner@suse.de
- Fix segmentation fault (close bug #1911)
-------------------------------------------------------------------
Thu Feb 3 21:15:55 CET 2000 - werner@suse.de
- Fixed de.po
-------------------------------------------------------------------
Wed Feb 2 21:53:18 CET 2000 - werner@suse.de
- Remove Makefile.Linux
- /usr/man -> /usr/share/man
- /usr/info -> /usr/share/info (man pages and main for info program)
- Install info pages of texinfo
-------------------------------------------------------------------
Wed Dec 1 15:58:09 CET 1999 - werner@suse.de
- small changes
-------------------------------------------------------------------
Mon Nov 29 19:59:29 CET 1999 - ke@suse.de
- update: version 4.0 (#600).
- use BuildRoot.
- install COPYRIGHT, etc.
- don't disable NLS.
-------------------------------------------------------------------
Mon Sep 13 17:23:57 CEST 1999 - bs@suse.de
- ran old prepare_spec on spec file to switch to new prepare_spec.
-------------------------------------------------------------------
Mon Jan 11 14:20:29 MET 1999 - ro@suse.de
- info/terminal.c : TIOCGETC and TIOCGLTC are defined on alpha,
but we can't access tchars and ltchars strutures,
so undef both
use tcgetattr and cfgetospeed to determine output
speed
-------------------------------------------------------------------
Fri Jul 17 15:36:35 MEST 1998 - werner@suse.de
- check exit satus of mkdir for temp directories
-------------------------------------------------------------------
Tue Oct 14 12:55:47 MEST 1997 - ro@suse.de
- update to 3.12
-------------------------------------------------------------------
Tue Oct 14 12:55:47 MEST 1997 - ro@suse.de
- ready for autobuild
-------------------------------------------------------------------
Fri Oct 10 15:08:57 MEST 1997 - florian@suse.de
- update to texinfo 3.11
-------------------------------------------------------------------
Sun Jun 22 18:57:49 MEST 1997 - florian@suse.de
- add debian-changes to support ANSI-cursor movements
- add texi2html 1.51
- add texi2roff 2.0
-------------------------------------------------------------------
Sun Apr 13 23:04:29 MEST 1997 - florian@suse.de
- cosmetic changes, just done in preparation for glibc
-------------------------------------------------------------------
Thu Oct 17 16:05:09 CEST 1996 - florian@suse.de
- Update auf neue Version 3.9.
