Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP1:GA
azure-li-services.11259
azure-li-services.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File azure-li-services.changes of Package azure-li-services.11259
------------------------------------------------------------------- Tue May 7 09:59:20 CEST 2019 - ms@suse.de - Bump version: 1.1.30 → 1.1.31 ------------------------------------------------------------------- Tue May 7 09:56:33 CEST 2019 - ms@suse.de - Reference commit for SUSE maintenance This submission creates a reference to bsc#1133162 which got fixed in Issue #138 ------------------------------------------------------------------- Tue May 7 09:32:10 CEST 2019 - ms@suse.de - Bump version: 1.1.29 → 1.1.30 ------------------------------------------------------------------- Fri May 3 10:42:32 CEST 2019 - ms@suse.de - Umount LUN only on cleanup If one service(A) needs the LUN and another service(B) that needs the LUN too runs in parallel a potential race condition exists in a way the service A could have umounted the LUN exactly at a time service B accesses it. Thus this patch changes the services such that only the last service, the cleanup service umounts the LUN. This Fixes #137 ------------------------------------------------------------------- Fri Apr 26 16:13:18 CEST 2019 - jesus.bv@suse.com - Load softdog module when STONITH is set up It loads the module and make the load boot persistant This Fixes #138 ------------------------------------------------------------------- Thu Apr 11 10:24:51 CEST 2019 - ms@suse.de - Bump version: 1.1.28 → 1.1.29 ------------------------------------------------------------------- Wed Apr 10 10:25:14 CEST 2019 - ms@suse.de - Fixup system-setup service dependencies The setup of the stonith SBD device requires the network to be up beforehand because the target is an iSCSI endpoint. This Fixes #119 ------------------------------------------------------------------- Mon Apr 1 09:14:10 CEST 2019 - ms@suse.de - Bump version: 1.1.27 → 1.1.28 ------------------------------------------------------------------- Fri Mar 29 16:34:54 CET 2019 - ms@suse.de - Create /etc/sysconfig/sbd configuration Write /etc/sysconfig/sbd which contains the disk device name used to initialize the SBD device ------------------------------------------------------------------- Tue Mar 12 22:06:45 CET 2019 - ms@suse.de - Add support for iSCSI SBD device setup In a new an optional stonith section the configuration for the iSCSI initiator and ip address can be setup. Once present the process to setup the iSCSI initiator as well as the device discovery is started. This Fixes bsc#1125373 and bsc#1125372 and Fixes #119 ------------------------------------------------------------------- Tue Mar 5 14:44:17 CET 2019 - ms@suse.de - Bump version: 1.1.26 → 1.1.27 ------------------------------------------------------------------- Tue Mar 5 14:41:13 CET 2019 - ms@suse.de - Tracker bug references This commit is a reference commit to track the update of the package for SLES. bsc#1127923 and bsc#1127924 references the implementations done with the Issues #121, #120 and #114 ------------------------------------------------------------------- Wed Feb 27 11:34:07 CET 2019 - ms@suse.de - Bump version: 1.1.25 → 1.1.26 ------------------------------------------------------------------- Wed Feb 27 11:33:00 CET 2019 - ms@suse.de - Fixed ifroute file name to match size limits Adapt ifroute- file name to match the new vlan interface naming and avoid exceeding the file name size limits ------------------------------------------------------------------- Tue Feb 26 18:05:35 CET 2019 - ms@suse.de - Bump version: 1.1.24 → 1.1.25 ------------------------------------------------------------------- Mon Feb 25 12:40:13 CET 2019 - ms@suse.de - Bump version: 1.1.23 → 1.1.24 ------------------------------------------------------------------- Mon Feb 25 12:38:26 CET 2019 - ms@suse.de - Followup fix for package installer Concatenation of packages still leads to multiple packages passed as one argument. This commit finally fixes the package list handling ------------------------------------------------------------------- Mon Feb 25 11:31:10 CET 2019 - ms@suse.de - Fixed network service vlan setup The vlan setup used the interface name in its ifcfg config file in the following format: ifcfg-<interface>.<vlan_id> However if the interface name is based on the MAC address that leads to a name which is longer than the fixed defined value from /usr/include/linux/if.h: #define IFNAMSIZ 16 and will make the network setup to fail. Therefore this patch changes the config file for the vlan setup to follow the format: ifcfg-vlan<vlan_id> which avoids that size limit. This Fixes #115 ------------------------------------------------------------------- Mon Feb 25 11:15:53 CET 2019 - ms@suse.de - Bump version: 1.1.22 → 1.1.23 ------------------------------------------------------------------- Mon Feb 25 11:14:22 CET 2019 - ms@suse.de - Fix package installer zypper expects multiple packages as arguments, one argument per package, one argument with multiple packages is treated as one long package name and of course fails ------------------------------------------------------------------- Mon Feb 25 09:22:13 CET 2019 - ms@suse.de - Cleanup network service Delete unused elements from ifcfg configuration on suse systems * ONBOOT, obsolete if STARTMODE is used * VLAN, obsolete ETHERDEVICE gives the vlan type * DEVICE, obsolete and invalid use of self reference. suse only uses this in the context of PPP(oE) interfaces which are not of interest in the scope of Azure LI/VLI ------------------------------------------------------------------- Mon Feb 25 08:20:52 CET 2019 - ms@suse.de - Bump version: 1.1.21 → 1.1.22 ------------------------------------------------------------------- Sat Feb 23 15:54:24 CET 2019 - ms@suse.de - Allow to specify install section per repo Update schema per last feedback. Allow to specify the install section per repository section. Restore former behavior for raw directory section, which installs all rpms from the given directories ------------------------------------------------------------------- Mon Feb 18 08:41:11 CET 2019 - ms@suse.de - Extend installer service Allow to configure multiple repositories and formats not only packages from a directory list. Specifically add packages to install in an install section. This Fixes #120 ------------------------------------------------------------------- Sun Feb 17 13:39:55 CET 2019 - ms@suse.de - Added optional require_password_change attribute Allow to specify if the user password has to be changed on next logon. This Fixes #121 ------------------------------------------------------------------- Tue Feb 12 09:29:03 CET 2019 - ms@suse.de - Bump version: 1.1.20 → 1.1.21 ------------------------------------------------------------------- Mon Feb 11 17:39:34 CET 2019 - ms@suse.de - Added support for interface bonding Allow to setup bonding slaves on top of vlan interfaces or direct bonding structure. Because bonding slave interfaces comes with no ip/netmask setup the schema has to be changed to allow interface list elements without ip and subnet_mask fields which were required elements before. This Fixes #114 ------------------------------------------------------------------- Wed Jan 9 17:59:06 CET 2019 - ms@suse.de - Bump version: 1.1.19 → 1.1.20 ------------------------------------------------------------------- Wed Jan 9 17:58:33 CET 2019 - ms@suse.de - Submission to SUSE:SLE-15:Update This commit tracks the submission for fate#326575 and bsc#1105612 ------------------------------------------------------------------- Wed Jan 9 17:53:39 CET 2019 - ms@suse.de - Bump version: 1.1.18 → 1.1.19 ------------------------------------------------------------------- Wed Jan 9 11:41:42 CET 2019 - ms@suse.de - Fixup createrepo requirement createrepo is no longer part of SLE15. The successor of this package is createrepo_c an implementation in C. Therefore the requires statement in the spec file should be changed to work with both distributions: SLE12 and SLE15. ------------------------------------------------------------------- Tue Jan 8 15:51:24 CET 2019 - ms@suse.de - Support MTU setup for standard and vlan interfaces Enhanced the config schema to allow the networking attributes mtu and vlan_mtu as optional arguments to configure the maximum transfer unit for the interface and/or its virtual type. In addition add a differentiator for the VeryLarge instance types in generation 3 and its successor. For Gen3 VeryLarge instance types the network setup was not yet defined because we haven't started to support this target. However the successor of the VeryLarge instance type is similar in the infrastructure and boot compared to the LargeInstance type and can be covered by the network service in the same way. This Fixes #105 and Fixes bsc#1120522 ------------------------------------------------------------------- Mon Jan 7 16:29:17 CET 2019 - ms@suse.de - Bump version: 1.1.17 → 1.1.18 ------------------------------------------------------------------- Mon Jan 7 16:26:38 CET 2019 - ms@suse.de - Submission to SUSE:SLE-15:Update This commit tracks the submission for fate#326575 and bsc#1103542 ------------------------------------------------------------------- Tue Dec 18 12:13:11 CET 2018 - ms@suse.de - Bump version: 1.1.16 → 1.1.17 ------------------------------------------------------------------- Tue Dec 18 12:12:54 CET 2018 - ms@suse.de - Update package build due to guidelines ------------------------------------------------------------------- Mon Dec 17 12:06:27 CET 2018 - ms@suse.de - Bump version: 1.1.15 → 1.1.16 ------------------------------------------------------------------- Mon Dec 17 12:04:50 CET 2018 - ms@suse.de - Tracker bug reference Update of the package is tracked in bsc#1119702 ------------------------------------------------------------------- Tue Dec 11 10:50:07 CET 2018 - ms@suse.de - Bump version: 1.1.14 → 1.1.15 ------------------------------------------------------------------- Mon Dec 10 17:05:35 CET 2018 - ms@suse.de - Fixed group processing in setup_ssh_authorization The change in the schema to specify group names/id was not handled in the code processing the setup of the ssh authorization. As there was a group key before and after the change in the schema but with a different result and used only as parameters to a mocked grp.getgrnam() system call the unit tests did not uncover the issue. This Fixes #98 ------------------------------------------------------------------- Wed Nov 21 08:52:12 CET 2018 - ms@suse.de - Bump version: 1.1.13 → 1.1.14 ------------------------------------------------------------------- Tue Nov 20 10:01:51 CET 2018 - ms@suse.de - Write workload log file In case of a deployment error, a log file in addition to the status flag files is written which contains the systemd service log information from all services ran so far. The log file is written to the storage location from which the yaml config file was read from. It is expected that this location is writable and offers enough space to store the logfile. In case of an error writing the log we will treat this as "bad luck" and continue with the cleanup. This Fixes #96 ------------------------------------------------------------------- Fri Nov 16 15:45:15 CET 2018 - ms@suse.de - Cleanup code to make flake8 happy The new version of flake8 is more strict on code checking and complained at several places. This commit fixes the code smells such that flake8 is happy again ------------------------------------------------------------------- Fri Nov 16 15:15:43 CET 2018 - ms@suse.de - Added workload status flag file At the time of the cleanup service a file named: workload_success_is_true or workload_success_is_false will be written on the storage location the config file was read from. At the time this file appears it's also safe to release the config file storage location from the system. This Fixes #93 ------------------------------------------------------------------- Fri Sep 21 18:04:51 CEST 2018 - ms@suse.de - Bump version: 1.1.12 → 1.1.13 ------------------------------------------------------------------- Fri Sep 21 11:51:44 CEST 2018 - ms@suse.de - Refactor group schema The description of a user group must be connected to a name, whereas the group id is an optional information. This should be also reflected in the schema ------------------------------------------------------------------- Wed Sep 19 20:45:31 CEST 2018 - ms@suse.de - Allow optional group_id in user data This Fixes #90 ------------------------------------------------------------------- Mon Sep 17 17:18:12 CEST 2018 - ms@suse.de - Bump version: 1.1.11 → 1.1.12 ------------------------------------------------------------------- Mon Sep 17 11:48:54 CEST 2018 - ms@suse.de - Bump version: 1.1.10 → 1.1.11 ------------------------------------------------------------------- Mon Sep 17 09:48:20 CEST 2018 - ms@suse.de - Replace pre/post section with descriptive comment ------------------------------------------------------------------- Mon Sep 17 08:08:11 CEST 2018 - rjschwei@suse.com - Fix typos in spec file comment ------------------------------------------------------------------- Fri Sep 14 18:32:16 CEST 2018 - ms@suse.de - Fix inconsistent cleanup service The introduction of the pre/post scripts in the package which runs systemd macros to delete the services causes a core dump on zypper and prevents the cleanup service from actually uninstalling the package. Thus I suggest to delete those pre/post actions from the package and leave this in the hand of the cleanup service using the reset-failed command from systemd after uninstall of the package has been performed. This references Issue #88 ------------------------------------------------------------------- Fri Sep 14 10:09:30 CEST 2018 - ms@suse.de - Bump version: 1.1.9 → 1.1.10 ------------------------------------------------------------------- Thu Sep 13 17:48:49 CEST 2018 - rjschwei@suse.com - Properly handle service stop/restart on package update or removal ------------------------------------------------------------------- Wed Sep 12 11:55:17 CEST 2018 - ms@suse.de - Bump version: 1.1.8 → 1.1.9 ------------------------------------------------------------------- Tue Sep 11 11:34:00 CEST 2018 - ms@suse.de - Allow to activate/deactivate the crash dump setup The crash dump setup deserves its own section containing the optional high/low values as well as a new switch to control the activation of the setup process. This Fixes #78 ------------------------------------------------------------------- Thu Aug 23 14:37:13 CEST 2018 - ms@suse.de - Bump version: 1.1.7 → 1.1.8 ------------------------------------------------------------------- Thu Aug 23 11:49:57 CEST 2018 - ms@suse.de - Follow up fix for mount location checkup Provides a umount_config_source method in the Defaults space to allow to perform an umount which succeeds even if the mountpoint is busy. The umount is performed as Lazy unmount and detaches the filesystem from the file hierarchy now, and clean up all references to this filesystem as soon as it is not busy anymore. This Fixes #76 ------------------------------------------------------------------- Tue Aug 21 22:22:03 CEST 2018 - ms@suse.de - Bump version: 1.1.6 → 1.1.7 ------------------------------------------------------------------- Tue Aug 21 12:02:09 CEST 2018 - ms@suse.de - Check if mount location is already mounted Call the mountpoint command in mount_config_source prior to the actual mount and perform the mount process only if the location is not already an active mountpoint. This Fixes #74 ------------------------------------------------------------------- Fri Aug 17 10:23:21 CEST 2018 - ms@suse.de - Bump version: 1.1.5 → 1.1.6 ------------------------------------------------------------------- Thu Aug 16 15:32:29 CEST 2018 - ms@suse.de - Accumulate errors in user service Instead of exiting at the first raise condition continue setting up other users and raise with the collection of potential errors. Fixes #71 ------------------------------------------------------------------- Thu Aug 16 15:09:07 CEST 2018 - ms@suse.de - Accumulate errors in system_setup service Instead of exiting at the first raise condition continue setting up other system components and raise with the collection of potential errors. Issue #71 ------------------------------------------------------------------- Thu Aug 16 14:55:03 CEST 2018 - ms@suse.de - Accumulate errors in storage service Instead of exiting at the first raise condition continue setting up other storage mounts and raise with the collection of potential errors. Issue #71 ------------------------------------------------------------------- Thu Aug 16 11:13:12 CEST 2018 - ms@suse.de - Accumulate errors in network service Instead of exiting at the first raise condition continue setting up other network interfaces and raise with the collection of potential errors. Issue #71 ------------------------------------------------------------------- Thu Aug 16 11:05:11 CEST 2018 - ms@suse.de - Accumulate errors in machine_constraints service Instead of exiting at the first raise condition continue checking other machine constraints and raise with the collection of potential errors. Issue #71 ------------------------------------------------------------------- Thu Aug 16 10:54:13 CEST 2018 - ms@suse.de - Don't raise on missing vlan id The vlan setup is an add-on setup if a vlan id is given. If it's not given the other network components are still valid and this does not justify create_vlan_config to raise an exception but just skip the vlan setup ------------------------------------------------------------------- Thu Aug 16 10:04:16 CEST 2018 - ms@suse.de - Fixed access of unbound variable For the copy of the ssh private key the location providing the key is mounted first and umounted when done. However the location information from the mount is unknown in the scope of the final block performing the umount. This Fixes #70 ------------------------------------------------------------------- Wed Aug 15 11:14:57 CEST 2018 - ms@suse.de - Fixup system inconsistency on module loading Make sure that no services module code is loaded from disk after the cleanup service has uninstalled the azure-li-services package. All follow up code after the uninstall must be kept in memory. This Fixes #68 ------------------------------------------------------------------- Tue Aug 14 10:55:45 CEST 2018 - ms@suse.de - Submission to SUSE:SLE-12-SP3:Update:PubClouds This commit tracks the submission for fate#326575 and bsc#1103542 ------------------------------------------------------------------- Thu Aug 2 11:15:17 CEST 2018 - ms@suse.de - Bump version: 1.1.4 → 1.1.5 ------------------------------------------------------------------- Fri Jul 27 16:50:13 CEST 2018 - ms@suse.de - Allow reboot of the system via kexec This patch set is two fold: First it adds a reboot flag to the status report and extends the cleanup service to allow for reboot of the system via kexec if all services were successful and at least one requests for reboot of the system in its result report. Second it extends the system setup service for the crash kernel memory setup in a way that the high value if not set via the config file is calculated based on the amount of main memory. If the preconfigured values have changed the system_setup service also activates the reboot flag in its status report This Fixes #64 ------------------------------------------------------------------- Thu Jul 26 17:01:17 CEST 2018 - ms@suse.de - Fixup saptune startup sequence Regarding a discussion with Peter Schinagl the sequence to start the saptune daemon was wrong and is fixed with this commit. Fixes #65 ------------------------------------------------------------------- Thu Jul 19 16:30:10 CEST 2018 - ms@suse.de - Bump version: 1.1.3 → 1.1.4 ------------------------------------------------------------------- Wed Jul 18 09:18:55 CEST 2018 - ms@suse.de - Update schema semantic to specify ssh private key The former ssh private key specification was based on a custom file name and a target name for the key. The given file name was copied and renamed as specified. However the renaming seems superfluous and can be avoided by specifying just the file name and copying as such to the right place. ------------------------------------------------------------------- Tue Jul 17 16:54:01 CEST 2018 - ms@suse.de - Refactor reading of ssh private key Instead of specifying a base64 encoded private ssh key string as part of the key element in the config file, we now just read a file path reference which is expected to exist on the storage location from where the config file was read. The referenced file is copied as the ssh private key of the configured user. This sets the config file free from any secret data and Fixes #58 ------------------------------------------------------------------- Tue Jul 17 11:47:43 CEST 2018 - ms@suse.de - Fixup runtime order of report service Next try to make sure the report service runs before any getty@.service is called. The getty@.service is configured to run after systemd-user-sessions.service Thus we should be safe if the reporting service runs before systemd-user-sessions.service ------------------------------------------------------------------- Tue Jul 10 09:48:45 CEST 2018 - ms@suse.de - Added reboot intervention on Very Large Instances For Very Large Instance platforms the reboot may not happen without operator intervention. On EFI systems this can be done by an efi call script: startup.nsh. This method was preferred over setting a BIOS boot option through the Bios menu by the Microsoft ops team. This Fixes #46 ------------------------------------------------------------------- Mon Jul 9 16:10:33 CEST 2018 - ms@suse.de - Seems like latest tox version is broken Pin the version to 2.9.1 for the moment ------------------------------------------------------------------- Mon Jul 9 15:58:53 CEST 2018 - ms@suse.de - Setup start of saptune daemon and tuned service The start of the service requires the sap-hana profile to be installed on the system. The hana profile as of today is delivered by a custom package from $MS, installed via the azure-li-install service. Thus the system_setup service now runs after the install service. This Fixes #52 ------------------------------------------------------------------- Sun Jul 8 16:58:51 CEST 2018 - ms@suse.de - Call kdump calibrate only when needed ------------------------------------------------------------------- Fri Jul 6 11:24:38 CEST 2018 - ms@suse.de - Added kernel crash dump setup Allows the setup of custom kernel crash dump values from the yaml config file. If not specified the kdumptool calibration results will be used to setup the high and low memory range to store crash dumps. Please also note that the image comes with a pre-configured crashdump setup in case the kernel crashes before this system_setup service has done its job. This Fixes #50 ------------------------------------------------------------------- Thu Jul 5 15:06:45 CEST 2018 - ms@suse.de - Added samepage and energy performance setup Extend the system_setup service with the setup of the kernel samepage handling and energy performance selection. This Fixes #54 and Fixes #53 ------------------------------------------------------------------- Thu Jun 28 15:36:30 CEST 2018 - ms@suse.de - Bump version: 1.1.2 → 1.1.3 ------------------------------------------------------------------- Wed Jun 27 21:39:02 CEST 2018 - ms@suse.de - Fix service order for storage unit The storage service has to run after the network target has been reached. This Fixes #49 ------------------------------------------------------------------- Thu Jun 21 15:38:12 CEST 2018 - ms@suse.de - Allow import of private key Add an additional optional sub section named ssh-private-key into the credentials section. The section allows for a name which is the base filename of an ssh private key and the key value encoded as base64 string. This Fixes #42 ------------------------------------------------------------------- Thu Jun 21 14:35:26 CEST 2018 - ms@suse.de - Bump version: 1.1.1 → 1.1.2 ------------------------------------------------------------------- Thu Jun 21 14:35:04 CEST 2018 - ms@suse.de - Added system_setup to report service ------------------------------------------------------------------- Thu Jun 21 11:06:52 CEST 2018 - ms@suse.de - Bump version: 1.1.0 → 1.1.1 ------------------------------------------------------------------- Thu Jun 21 10:04:54 CEST 2018 - ms@suse.de - Make hostname an optional setup ------------------------------------------------------------------- Wed Jun 20 16:36:39 CEST 2018 - ms@suse.de - Added system_setup service Along with the service the setup of the hostname has been implemented. This Fixes #40 ------------------------------------------------------------------- Tue Jun 19 19:10:30 CEST 2018 - ms@suse.de - Fixup success state for optional services This Fixes #43 ------------------------------------------------------------------- Tue Jun 19 18:41:17 CEST 2018 - ms@suse.de - Make sure report service starts before getty This Fixes #38 ------------------------------------------------------------------- Tue Jun 19 18:19:11 CEST 2018 - ms@suse.de - Improve error handling on mount_config_source Provide more detail on the used sequence of mount calls and their errors ------------------------------------------------------------------- Tue Jun 19 16:38:36 CEST 2018 - ms@suse.de - Fixup ssh files ownership in user service ssh files must be owned by the user they belong to. In addition the home path of the root user is not located in the standard home directory of users and needs an extra handling. This Fixes #37 ------------------------------------------------------------------- Mon Jun 18 18:12:53 CEST 2018 - ms@suse.de - networking is required ------------------------------------------------------------------- Mon Jun 18 17:33:09 CEST 2018 - ms@suse.de - Update schema constraints per review ------------------------------------------------------------------- Thu Jun 14 14:59:09 CEST 2018 - ms@suse.de - Added DVD fallback mounting sequence Primarily we mount a LUN by label, but if that failed a fallback mount from /dev/dvd kicks in. Only if that fails the overall mount attempt has failed. This Fixes #13 ------------------------------------------------------------------- Thu Jun 14 14:25:11 CEST 2018 - ms@suse.de - Added schema validation for config file This Fixes #31 ------------------------------------------------------------------- Wed Jun 13 16:52:41 CEST 2018 - ms@suse.de - Bump version: 1.0.0 → 1.1.0 ------------------------------------------------------------------- Wed Jun 13 12:26:11 CEST 2018 - ms@suse.de - Make sure mount point path gets created ------------------------------------------------------------------- Tue Jun 12 17:03:04 CEST 2018 - ms@suse.de - Added storage to report service ------------------------------------------------------------------- Tue Jun 12 16:45:37 CEST 2018 - ms@suse.de - Added machine_constraints to report service ------------------------------------------------------------------- Tue Jun 12 13:14:07 CEST 2018 - ms@suse.de - Added free space validation ------------------------------------------------------------------- Tue Jun 12 12:31:35 CEST 2018 - ms@suse.de - Added storage service Updates fstab with new entries from the optional storage section and activates the new mount locations. This Fixes #10 ------------------------------------------------------------------- Tue Jun 12 11:25:42 CEST 2018 - ms@suse.de - Separate issue report from cleanup service Put the report code into its own service and handle the dependency chain from within the systemd unit files. report runs after all services which creates a status report and cleanup runs after report ------------------------------------------------------------------- Tue Jun 12 10:55:43 CEST 2018 - ms@suse.de - Simplify dict access ------------------------------------------------------------------- Tue Jun 12 10:43:26 CEST 2018 - ms@suse.de - Use binary multiples of bytes (powers of two) Storage sizes as we work with here are always byte values ------------------------------------------------------------------- Mon Jun 11 16:09:56 CEST 2018 - ms@suse.de - Added machine constraint checker service Validate min_cores and min_memory constraints on the machine when booting. This Fixes #30 ------------------------------------------------------------------- Mon Jun 11 11:39:42 CEST 2018 - ms@suse.de - Added overall state check for cleanup service Added check for success state from all services and update the /etc/issue file if one or more services have a failed state. This completes and Fixes #19 ------------------------------------------------------------------- Mon Jun 11 10:15:08 CEST 2018 - ms@suse.de - Bump version: 0.4.1 → 1.0.0 ------------------------------------------------------------------- Mon Jun 11 10:11:38 CEST 2018 - ms@suse.de - Handle missing credentials section as error If no credentials section is specified in the config file this should be reported as an error. That's because in the image no user login will be allowed and therefore the credentials setup from the config file is the only door opener and mandatory for any subsequent work with the system. This Fixes #29 ------------------------------------------------------------------- Fri Jun 8 18:01:49 CEST 2018 - ms@suse.de - Fix unit test for install unit ------------------------------------------------------------------- Fri Jun 8 17:21:31 CEST 2018 - ms@suse.de - Better name for the user method As create_user actually creates or modifies if the user already exists, the name should reflect this ------------------------------------------------------------------- Fri Jun 8 16:04:33 CEST 2018 - ms@suse.de - Move status report directory to /var/lib ------------------------------------------------------------------- Fri Jun 8 09:14:30 CEST 2018 - ms@suse.de - Fixup user service for handling existing users If the user setup in the config file already exists on the system, the user service failed to add that user as it should rather modify it. This Fixes #25 ------------------------------------------------------------------- Fri Jun 8 08:39:29 CEST 2018 - ms@suse.de - Handle missing packages source as error The install service did not handle an empty list of packages sources as an error and just proceeded without installing packages. However in the scope of the large instance setup it is expected that there are packages to install and if not this is an error condition. This Fixes #26 ------------------------------------------------------------------- Thu Jun 7 10:06:05 CEST 2018 - ms@suse.de - Fixup ssh directory and setup file permissions ------------------------------------------------------------------- Thu Jun 7 08:21:47 CEST 2018 - ms@suse.de - Let services report result status In preperation to operate on an overall success or failed state depending on the result of the individual services, each service should have an easy way to report its result state. The StatusReport class implements this in a way that each service reports its state in a yaml file written to the directory provided by get_status_report_directory(). As services are called by systemd and will run in parallel, one file per service name is created to avoid potential I/O conflicts on write. Issue #19 ------------------------------------------------------------------- Wed Jun 6 14:47:43 CEST 2018 - ms@suse.de - Added cleanup service After all services got called the cleanup service kicks in and uninstalls the azure-li-services package. This Fixes #12 ------------------------------------------------------------------- Wed Jun 6 14:31:23 CEST 2018 - ms@suse.de - Ensure /etc/suse_firstboot_config.yaml is at 0600 This is related to Issue #12 ------------------------------------------------------------------- Mon Jun 4 18:20:48 CEST 2018 - ms@suse.de - Cleanup of config file format Per discussion this commit adds a revised version of the config file format to become active. Basic changes are: * networking moved on toplevel * blade section gets deleted, sku moved to toplevel * storage section was reworked * new section machine_constraints contains min_cores and min_memory values the machine has to provide ------------------------------------------------------------------- Fri Jun 1 12:38:20 CEST 2018 - ms@suse.de - Bump version: 0.4.0 → 0.4.1 ------------------------------------------------------------------- Fri Jun 1 12:37:12 CEST 2018 - ms@suse.de - Fixed rsync command invocation For pattern matching a shell environment is required ------------------------------------------------------------------- Fri Jun 1 12:20:25 CEST 2018 - ms@suse.de - Fixed call service unit Fixed wrong condition trigger file reference ------------------------------------------------------------------- Fri Jun 1 10:00:13 CEST 2018 - ms@suse.de - Bump version: 0.3.0 → 0.4.0 ------------------------------------------------------------------- Wed May 30 17:26:31 CEST 2018 - ms@suse.de - Added package install service Allow to install packages from local repository This Fixes #7 ------------------------------------------------------------------- Wed May 30 11:19:31 CEST 2018 - ms@suse.de - Bump version: 0.2.0 → 0.3.0 ------------------------------------------------------------------- Tue May 29 15:09:31 CEST 2018 - ms@suse.de - Bump version: 0.1.0 → 0.2.0 ------------------------------------------------------------------- Thu May 24 09:38:12 CEST 2018 - rjschwei@suse.com - Fix service ordering for network setup + The network setup needs to be written before any of the netwroking services are started by systemd, or we have to explicitly restart the networking. This order is only guaranteed with the network-pre.target ------------------------------------------------------------------- Fri May 18 22:10:22 CEST 2018 - ms@suse.de - Fixup sudo authorization Setup of sudoers and admin group must be done only once ------------------------------------------------------------------- Fri May 18 21:50:02 CEST 2018 - ms@suse.de - Allow for multiple user setup In addition more elements of the user can be specified such as user id, group and home_dir ------------------------------------------------------------------- Fri May 18 20:32:09 CEST 2018 - ms@suse.de - Be more clear on call argument ------------------------------------------------------------------- Fri May 18 16:36:47 CEST 2018 - ms@suse.de - Update runtime config key description ------------------------------------------------------------------- Fri May 18 11:41:49 CEST 2018 - ms@suse.de - Added script call service ------------------------------------------------------------------- Fri May 18 10:58:11 CEST 2018 - ms@suse.de - Added User service Creates the configured user and its access setup for ssh and sudo services in the scope of an Azure Li/Vli instance This Fixes #6 ------------------------------------------------------------------- Thu May 17 09:07:14 CEST 2018 - ms@suse.de - Bump version: 0.0.6 → 0.1.0 ------------------------------------------------------------------- Wed May 16 16:53:10 CEST 2018 - ms@suse.de - Refactor misleading class names Using Li in names that covers implementation for Li and VLi may lead to confusion in the future when we need to differentiate between the two, the namespace should be free for that purpose ------------------------------------------------------------------- Wed May 16 16:40:19 CEST 2018 - ms@suse.de - Time never stops ------------------------------------------------------------------- Wed May 16 11:02:38 CEST 2018 - ms@suse.de - Refactor network service Change on the design to allow for running different code paths depending on if the instance is a LargeInstance or a VeryLargeInstance. Apply the instance distinction with the network service ------------------------------------------------------------------- Tue May 15 16:29:40 CEST 2018 - ms@suse.de - Added azure-li-network service Work through the networking section of the Azure Li/Vli config file and setup the network configuration for this instance type. This Fixes #4 ------------------------------------------------------------------- Wed May 9 16:52:37 CEST 2018 - ms@suse.de - Bump version: 0.0.5 → 0.0.6 ------------------------------------------------------------------- Wed May 9 16:51:47 CEST 2018 - ms@suse.de - Fixed system unit systemd requires absolute path to binary ------------------------------------------------------------------- Wed May 9 14:50:28 CEST 2018 - ms@suse.de - Bump version: 0.0.4 → 0.0.5 ------------------------------------------------------------------- Wed May 9 14:50:13 CEST 2018 - ms@suse.de - Fixed spec file python3-setuptools is required ------------------------------------------------------------------- Tue May 8 09:35:29 CEST 2018 - ms@suse.de - Fixed spec file template Update to common source tarball name ------------------------------------------------------------------- Tue May 8 09:33:34 CEST 2018 - ms@suse.de - Bump version: 0.0.3 → 0.0.4 ------------------------------------------------------------------- Tue May 8 09:33:00 CEST 2018 - ms@suse.de - Update spec file Create common style source tarball ------------------------------------------------------------------- Tue May 8 09:27:27 CEST 2018 - ms@suse.de - Bump version: 0.0.2 → 0.0.3 ------------------------------------------------------------------- Tue May 8 09:24:24 CEST 2018 - ms@suse.de - Build changelog from git history ------------------------------------------------------------------- Tue May 8 09:21:25 CEST 2018 - ms@suse.de - Bump version: 0.0.1 → 0.0.2 ------------------------------------------------------------------- Tue May 8 09:20:55 CEST 2018 - ms@suse.de - Fixed bumpversion config file Wrong path to version file ------------------------------------------------------------------- Mon May 7 11:11:40 CEST 2018 - ms@suse.de - Update per agreement on config file name ------------------------------------------------------------------- Fri May 4 12:13:41 CEST 2018 - ms@suse.de - Implement config lookup service The implementation is based on mounting a device by label and lookup of a pre defined file name on the root of that mount point. This Fixes #1 and This Fixes #2 ------------------------------------------------------------------- Fri May 4 11:37:46 CEST 2018 - ms@suse.de - Added Command and Path class Classes for command invocation and lookup ------------------------------------------------------------------- Wed Apr 25 11:30:57 CEST 2018 - ms@suse.de - Fixed spec file source directory name ------------------------------------------------------------------- Wed Apr 25 11:27:04 CEST 2018 - ms@suse.de - Fixed spec file source name ------------------------------------------------------------------- Wed Apr 25 11:21:50 CEST 2018 - ms@suse.de - Added config_lookup service Implementation is still incomplete as we don't know how Azure presents the file to the instance. ------------------------------------------------------------------- Mon Apr 23 16:59:20 CEST 2018 - ms@suse.de - Added RuntimeConfig class Implements reading of Azure LI/VLI runtime config file ------------------------------------------------------------------- Mon Apr 23 15:47:19 CEST 2018 - ms@suse.de - Add package template
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
