Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP1:GA
pcsc-ccid.3508
pcsc-ccid.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File pcsc-ccid.changes of Package pcsc-ccid.3508
------------------------------------------------------------------- Mon Oct 3 06:31:24 UTC 2016 - wr@rosenauer.org - Updated to version 1.4.25 (bsc#941721, FATE#319488). * Add support of Aladdin R.D. JaCarta (idProduct: 0x0402) Broadcom Corp 5880 (idProduct: 0x5832) Broadcom Corp 5880 (idProduct: 0x5833) Broadcom Corp 5880 (idProduct: 0x5834) ESMART Token GOST X2 ET1020-A Feitian VR504 VHBR Contactless & Contact Card Reader Feitian bR500 Gemalto K50 appidkey GmbH ID100-USB SC Reader appidkey GmbH ID50 -USB * Remove suport of Broadcom Corp 5880 (idProduct: 0x5800) Broadcom Corp 5880 (idProduct: 0x5805) KEBTechnology KONA USB SmartCard * Fix crash with GemCore Pos Pro and GemCore Sim Pro * Some minor improvements ------------------------------------------------------------------- Mon May 30 06:36:05 UTC 2016 - wr@rosenauer.org - Updated to version 1.4.24 * Add support of Generic USB Smart Card Reader Giesecke & Devrient GmbH StarSign CUT S HID AVIATOR Generic * better support of Elatec TWN4 SmartCard NFC * better support of SCM SCL011 * fix SCARD_ATTR_VENDOR_IFD_SERIAL_NO attribute size * fix a race condition on card events with multiple readers * Some minor improvements ------------------------------------------------------------------- Thu Apr 21 07:26:49 UTC 2016 - wr@rosenauer.org - Updated to version 1.4.23 * Add support of ACS ACR3901U ICC Reader Alcor Micro AU9560 Cherry SmartTerminal XX44 HID Global OMNIKEY 3x21 Smart Card Reader HID Global OMNIKEY 5022 Smart Card Reader HID Global OMNIKEY 6121 Smart Card Reader IonIDe Smartcard Reader reader KACST HSID Reader KACST HSID Reader Dual Storage KACST HSID Reader Single Storage * Remove support of VMware Virtual USB CCID * Fix a busy loop consuming 100% of CPU for some composite USB devices impacted readers: Yubico Yubikey NEO U2F+CCID and Broadcom BCM5880 * Remove support of (unused) option DRIVER_OPTION_RESET_ON_CLOSE * log libusb error name instead of decimal value * Some minor improvements ------------------------------------------------------------------- Sun Jan 10 19:43:54 UTC 2016 - wr@rosenauer.org - Updated to version 1.4.22 * Add support of Aktiv Rutoken PINPad 2 Aladdin R.D. JC-WebPass (JC600) Aladdin R.D. JCR-770 Aladdin R.D. JaCarta Aladdin R.D. JaCarta Flash Aladdin R.D. JaCarta LT Aladdin R.D. JaCarta U2F (JC602) Athena ASEDrive IIIe Combo Bio PIV Athena ASEDrive IIIe KB Bio PIV GEMALTO CT1100 GEMALTO K1100 Hitachi, Ltd. Hitachi Biometric Reader Hitachi, Ltd. Hitachi Portable Biometric Reader Nitrokey Nitrokey Storage THURSBY SOFTWARE TSS-PK1 Thursby Software Systems, Inc. TSS-PK7 Thursby Software Systems, Inc. TSS-PK8 * Patch for Microchip SEC1110 reader on Mac OS X (card events notification) * Patch for Cherry KC 1000 SC (problem was with a T=1 card and case 2 APDU) * Fix support of FEATURE_MCT_READER_DIRECT for the Kobil mIDentity visual reader * Set timeout to 90 sec for PPDU (Pseudo APDU) commands. This change allows the use of a Secure Verify command sent as a PPDU through SCardTransmit(). * Fix a crash when reader reader initialization failed * Fix initialization bug with Gemalto Pinpad reader on Mac OS X * Some minor bugs fixed ------------------------------------------------------------------- Sun Oct 25 09:39:20 UTC 2015 - wr@rosenauer.org - Updated to version 1.4.21 * Add support of ACS ACR1252 Dual Reader Chicony HP USB Smartcard CCID Keyboard JP Chicony HP USB Smartcard CCID Keyboard KR FT ePass2003Auto Feitian bR301 BLE Feitian iR301 (ProductID 0x0619) Feitian iR301 (ProductID 0x061C) Identiv @MAXX ID-1 Smart Card Reader Identiv @MAXX Light2 token Identiv CLOUD 2980 F Smart Card Reader Identiv Identiv uTrust 4701 F Dual Interface Reader Identiv SCR3500 A Contact Reader Identiv SCR3500 B Contact Reader Identiv SCR35xx USB Smart Card Reader Identiv uTrust 2900 R Smart Card Reader Identiv uTrust 2910 R Smart Card Reader Identiv uTrust 2910 R Taglio SC Reader Identiv uTrust 3512 SAM slot Token Identiv uTrust 3522 embd SE RFID Token Identiv uTrust 3700 F CL Reader Identiv uTrust 3701 F CL Reader Identive Identive CLOUD 4000 F DTC Liteon HP SC Keyboard - Apollo (Liteon) Liteon HP SC Keyboard - Apollo JP (Liteon) Liteon HP SC Keyboard - Apollo KR (Liteon) Nitrokey Nitrokey HSM Nitrokey Nitrokey Pro Nitrokey Nitrokey Start Rocketek RT-SCR1 VASCO DIGIPASS 875 WatchCNPC USB CCID Key * Remove support of Crypto Stick Crypto Stick v1.4 is an old version of Nitrokey Nitrokey Pro Free Software Initiative of Japan Gnuk Token is an old version of Nitrokey Nitrokey Start * Add Feitain R502 dual interface (composite) reader on Mac OS X * display a human readable version of the error code returned by libusb * Mac OS X: wait until libusb/the reader is ready * some minor bugs fixed ------------------------------------------------------------------- Wed Aug 5 14:09:02 UTC 2015 - wr@rosenauer.org - Updated to version 1.4.20 * Add support of ACS ACR1251 Dual Reader Access IS NFC Smart Module BIFIT iToken BLUTRONICS BLUDRIVE II CCID (idProduct: 0x1079) Generic MultiCard Device NXP Pegoda 2 N SafeNet eToken 5100 SafeNet eToken 7300 Yubico Yubikey 4 CCID Yubico Yubikey 4 OTP+CCID Yubico Yubikey 4 OTP+U2F+CCID Yubico Yubikey 4 U2F+CCID * Depends on libusb version 1.0.9 instead of 1.0.8 * The O2 Micro Oz776 reader only supports 9600 bps - spec file cleanup - remove pgp validation from build (now handled via OBS) ------------------------------------------------------------------- Wed May 13 08:34:02 UTC 2015 - wr@rosenauer.org - Updated to version 1.4.19 * Add support of AK910 CKey (idProduct 0x0001) AK910 CKey (idProduct 0x0011) AK910 IDONE Broadcom Corp 5880 (idProduct: 0x5804) CASTLES EZCCID Smart Card Reader Cherry KC 1000 SC Cherry KC 1000 SC Z Cherry KC 1000 SC/DI Cherry KC 1000 SC/DI Z Cherry TC 1300 Chicony USB Smart Card Keyboard Elatec TWN4 SmartCard NFC Feitian 502-CL Feitian eJAVA Token FujitsuTechnologySolutions GmbH Keyboard KB100 SCR FujitsuTechnologySolutions GmbH Keyboard KB100 SCR eSIG Hewlett-Packard HP lt4112 Gobi 4G Module Identive SCT3522CC token OMNIKEY AG 6121 USB mobile PIVKey T800 REINER SCT tanJack Bluetooth Watchdata USB Key * Remove ZLP patch for Gemalto IDBridge CT30 and K30. The patch was causing problems with the K50. A new reader firmware (version F) solved the problem so the patch is no more needed. * Fix a memory leak in an error path * some minor bugs removed ------------------------------------------------------------------- Sat Sep 13 18:50:10 UTC 2014 - wr@rosenauer.org - Updated to version 1.4.18 * Add support of Cherry Cherry TC 1100 Cherry Smart Card Reader USB Cherry Smartcard Keyboard G87-1xx44 FujitsuTechnologySolutions GmbH Keyboard KB SCR2 Lenovo Lenovo USB Smartcard Keyboard Yubico Yubikey NEO OTP+U2F+CCID Yubico Yubikey NEO U2F+CCID eID_R6 001 X8 * fix support of Omnikey CardMan 3121 * reduce memory consumed when configured with --enable-embedded * prepare the port to UEFI ------------------------------------------------------------------- Thu Jun 12 14:53:27 UTC 2014 - wr@rosenauer.org - Updated to version 1.4.17 * Add support of Feitian R502 Free Software Initiative of Japan Gnuk Token German Privacy Foundation Crypto Stick v2.0 HID Global veriCLASS Reader HID OMNIKEY 5025-CL Identive Technologies Multi-ISO HF Reader - USB OMNIKEY 5421 OMNIKEY AG 3121 USB udea MILKO V1. * Fix support of O2 Micro Oz776. The reader is limited to 9600 bps * some minor bugs removed ------------------------------------------------------------------- Sun Mar 23 17:13:24 UTC 2014 - wr@rosenauer.org - Updated to version 1.4.16 * Add support of Crypto Stick Crypto Stick v1.4 Hewlett Packard USB Smartcard CCID Keyboard IID AT90S064 CCID READER INSIDE Secure VaultIC 405 Smart Object INSIDE Secure VaultIC 441 Smart Object Microchip SEC1110 Microchip SEC1210 Watchdata W5181 * Add support of DRIVER_OPTION_DISABLE_PIN_RETRIES The Gemalto pinpad reader sends a VERIFY command with no PIN value in order to retreive the remaining retries from the card. Some cards (like the OpenPGP card) do not support this. It is now possible to disable this behavior from the Gemalto Pinpad and Covadis Véga Alpha. * Add support of WTX received before SW during Secure Pin Entry Verify The Swiss health care card sends a WTX request before returning the SW code. If the reader is in TPDU and the card is in T=1 the driver must manage the request itself. - added alternative key (E8F9C57E) to keyring ------------------------------------------------------------------- Sat Feb 15 20:48:40 UTC 2014 - wr@rosenauer.org - Updated to version 1.4.15 * Add support of DUALi DRAGON NFC READER Feitian bR301 Gemalto CR30 reader in serial communication Gemalto Ezio Shield Pro SC IIT E.Key Almaz-1C * PIN_MODIFY_STRUCTURE & PIN_VERIFY_STRUCTURE: Fix calculation of the command length after pcsc-lite 1.8.9 (October 2013) changed the PCSC/reader.h header * Add specific PIN min (0) & max (25) sizes for SmartTerminal ST-2xxx * Do not get the data rates if bNumDataRatesSupported = 0 * Support Gemalto features for pinpad readers MinimumPINSize, MaximumPINSize and bEntryValidationCondition are fetched from the reader firmware * disable (broken) pinpad for Fujitsu SmartCase KB SCR eSIG * some minor bugs removed ------------------------------------------------------------------- Tue Nov 26 11:07:53 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.14 * Add support of Gemalto GemCore SIM Pro firmware 2.0 (using USB) * report FEATURE_IFD_PIN_PROPERTIES only for pinpad readers * Generalize the management of (old) readers with bDeviceClass = 0xFF * some minor bugs removed ------------------------------------------------------------------- Thu Oct 10 10:54:29 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.13 * Add support of Access IS ePassport Reader Planeta RC700-NFC CCID * Add support of Windows value for CM_IOCTL_GET_FEATURE_REQUEST Windows uses 0x313520 for SCARD_CTL_CODE(3400) pcsc-lite uses 0x42000D48 for SCARD_CTL_CODE(3400) RDP aplications (like rdesktop) will convert SCardControl() commands from a Windows application (so using 0x313520) to pcsc-lite. * fix multi-slot support for card movement notification * some minor bugs removed ------------------------------------------------------------------- Tue Aug 13 18:16:31 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.12 * Add support of HID OMNIKEY 5127 CK HID OMNIKEY 5326 DFR HID OMNIKEY 5427 CK Ingenico WITEO USB Smart Card Reader (Base and Badge) SecuTech SecuTech Token * Add support of card movement notifications for multi-slot readers * Check libusb is at least at version 1.0.8 * Get the serialconfdir value from pcsc-lite pkg config instead of using $(DESTDIR)/$(sysconfdir)/reader.conf.d/ if not specified (pcsc-lite does not provide that information yet so the value is set manually * some minor bugs removed ------------------------------------------------------------------- Wed Jun 12 12:39:58 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.11 * Add support of Gemalto IDBridge CT30 Gemalto IDBridge K30 SCM Microsystems Inc. SCL010 Contactless Reader SCM Microsystems Inc. SDI011 Contactless Reader THRC reader * Better management of time extension requests * parse: better support of devices with bInterfaceClass = 0xFF * udev rule file: Remove setting group to pcscd, remove support of Linux kernel < 2.6.35 for auto power up management * some minor bugs removed ------------------------------------------------------------------- Sun Apr 21 16:02:52 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.10 * Add support of ACS APG8201 USB Reader with PID 0x8202 GIS Ltd SmartMouse USB Gemalto IDBridge K3000 Identive CLOUD 2700 F Smart Card Reader Identive CLOUD 2700 R Smart Card Reader Identive CLOUD 4500 F Dual Interface Reader Identive CLOUD 4510 F Contactless + SAM Reader Identive CLOUD 4700 F Dual Interface Reader Identive CLOUD 4710 F Contactless + SAM Reader Inside Secure AT90SCR050 Inside Secure AT90SCR100 Inside Secure AT90SCR200 SCR3310-NTTCom USB SmartCard Reader SafeTech SafeTouch SpringCard H512 Series SpringCard H663 Series SpringCard NFC'Roll Yubico Yubikey NEO CCID Yubico Yubikey NEO OTP+CCID * Add support of time extension for Escape commands ------------------------------------------------------------------- Wed Jan 16 18:13:59 UTC 2013 - wr@rosenauer.org - Updated to version 1.4.9 * Add support of Aktiv Rutoken PINPad In Aktiv Rutoken PINPad Ex REINER SCT cyberJack go * Info.plist: Correctly handle reader names containing & ------------------------------------------------------------------- Wed Jan 9 18:27:19 CET 2013 - sbrabec@suse.cz - Verify GPG signature. ------------------------------------------------------------------- Thu Oct 18 09:06:54 UTC 2012 - fcrozat@suse.com - Fix build with new udev rules directory location. ------------------------------------------------------------------- Mon Oct 8 05:57:55 UTC 2012 - wr@rosenauer.org - Updated to version 1.4.8: * Add support of SCR3310-NTTCom USB (was removed in version 1.4.6) Inside Secure VaultIC 420 Smart Object Inside Secure VaultIC 440 Smart Object * Wait up to 3 seconds for reader start up * Add support of new PC/SC V2 part 10 properties: dwMaxAPDUDataSize wIdVendor wIdProduct * Use helper functions from libPCSCv2part10 to parse the PC/SC v2 part 10 features ------------------------------------------------------------------- Tue Jun 26 14:49:22 UTC 2012 - wr@rosenauer.org - Updated to version 1.4.7: * Add support of ACS ACR101 ICC Reader ACS CryptoMate64 Alcor Micro AU9522 Bit4id CKey4 Bit4id cryptokey Bit4id iAM Bit4id miniLector Bit4id miniLector-s CCB eSafeLD Gemalto Ezio Shield Branch KOBIL Systems IDToken NXP PR533 * KOBIL Systems IDToken special cases: Give more time (3 seconds instead of 2) to the reader to answer Hack for the Kobil IDToken and Geman eID card. The German eID card is bogus and need to be powered off before a power on Add Reader-Info-Commands special APDU/command - Manufacturer command - Product name command - Firmware version command - Driver version command * Use auto suspend for CCID devices only (Closes Alioth bug [#313445] "Do not activate USB suspend for composite devices: keyboard") * Fix some error management in the T=1 TPDU state machine * some minor bugs removed * some minor improvements added - do not call bootstrap since autoconf requirement is bleeding edge and only works on Factory/12.2 - also seems to be unnecessary ------------------------------------------------------------------- Sun Apr 15 08:40:16 UTC 2012 - wr@rosenauer.org - Updated to version 1.4.6: * Add support of Avtor SC Reader 371, Avtor SecureToken, DIGIPASS KEY 202, Fujitsu SmartCase KB SCR eSIG, Giesecke & Devrient StarSign CUT, Inside Secure VaultIC 460 Smart Object, Macally NFC CCID eNetPad reader, OmniKey 6321 USB, SCM SDI 011, Teridian TSC12xxF, Vasco DIGIPASS KEY 101 * Remove support of readers without a USB CCID descriptor file 0x08E6:0x34C1:Gemalto Ezio Shield Secure Channel 0x08E6:0x34C4:Gemalto Ezio Generic 0x04E6:0x511A:SCM SCR 3310 NTTCom 0x0783:0x0008:C3PO LTC32 USBv2 with keyboard support 0x0783:0x9002:C3PO TLTC2USB 0x047B:0x020B:Silitek SK-3105 * Disable SPE for HP USB CCID Smartcard Keyboard. The reader is bogus and unsafe. * Fix a problem with ICCD type A devices. We now wait for device ready * Secure PIN Verify and PIN Modify: set the minimum timeout to 90 seconds * Add support of wIdVendor and wIdProduct properties * Add support of dwMaxAPDUDataSize * Add support of Gemalto firmware features * some minor bugs removed ------------------------------------------------------------------- Fri Dec 2 16:35:03 UTC 2011 - coolo@suse.com - add automake as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Mon Oct 17 10:08:36 UTC 2011 - wr@rosenauer.org - Updated to version 1.4.5: * Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID), BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with fingerprint), SDS DOMINO-Key TWIN Pro * Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND * SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not the vendor name and version of the driver but of the IFD: InterFace Device i.e. the smart card reader. We then return the USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION * reduce binary size by removing unused features from simclist * Fix some warnings reported by Coverity ------------------------------------------------------------------- Wed May 18 18:10:44 UTC 2011 - wr@rosenauer.org - Updated to version 1.4.4: * Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio Generic * Activate USB automatic power suspend. The Linux kernel should power off the reader automatically if it is not used (pcscd is not running). * Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines * Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011, Feitian ePass2003 readers * use :libudev: instead of :libhal: naming scheme * Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch and the associated documentation. * the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so disable it * Add support of Feitian SCR310 reader (also known as 301v2), ACS APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200, Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers * Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II * disable use of interrupt card events for multi slots readers ------------------------------------------------------------------- Wed Feb 16 14:13:52 CET 2011 - oneukum@suse.de - Added support for internal reader in HP laptops ------------------------------------------------------------------- Wed Jan 5 17:13:38 CET 2011 - sbrabec@suse.cz - Updated to version 1.4.1: * Security fix (bnc#661000, CVE-2010-4530). * Migrated to libusb-1_0. * udev support. * Compatible with pcsc-lite-1.6. * See ChangeLog for details. ------------------------------------------------------------------- Wed Aug 5 16:59:22 CEST 2009 - sbrabec@suse.cz - Updated to version 1.3.11: * Incompatible change: Remove support of Reiner-SCT cyberJack pinpad(a) on request of Reiner-SCT. Use pcsc-cyberjack instead. * Should work: Panasonic USB Smart Card Reader 7A-Smart, ATMEL AT91SC192192CT-USB, Alcor Micro SCR001, Aktiv Rutoken ECP, Synnix STD200, more Neowave Weneo tokens, Feitian SCR301 Raritan D2CIM-DVUSB VM/CCID * New known firmware: Kobil EMV CAP, ACS ACR122U-WB-R with bogus firmware < 2.06 * Broadcom 5880 should work a bit better * Fixes for GemProx DU/SU and hacks for other Gemalto readers * SCM SCL010 Contactless Reader is not supported * Add support of FEATURE_MCT_READERDIRECT. Now only on the Kobil TriB@nk reader. * Support --disable-class argument to build a NON class driver. * HAL support fixes. * Add support of PIN_PROPERTIES_STRUCTURE structure and FEATURE_IFD_PIN_PROPERTIES * It is possible to configure composite devices to be seen as multi-slots. * Other fixes, improvement and updates. ------------------------------------------------------------------- Tue Apr 7 15:30:02 CEST 2009 - sbrabec@suse.cz - Updated to version 1.3.10: * Added a hack to support the bogus OpenGPG card. * Should work: Precise Biometrics 200 MC, Precise Biometrics 250 MC, SafeNet IKey4000 used in different device, Atmel AT98SC032CT, Neowave Weneo, MSI StarReader SMART, VMware Virtual USB CCID reader, ACS ACR122U PICC Interface, HP MFP Smart Card Reader, KONA USB SmartCard, SpringCard CrazyWriter, CSB6 Basic, CSB6 Secure, CSB6 Ultimate, EasyFinger Standard, EasyFinger Ultimate and Prox'N'Roll, Atmel AT91SO, Cherry SmartTerminal ST-1200USB, Aladdin eToken PRO USB 72K Java. * Differentiate between KOBIL mIDentity M and XL. * Known readers: SpringCard Prox'N'Roll, CSB6 Basic, EasyFinger Ultimate, CSB6 Ultimate, EasyFinger Standard, CrazyWriter, CSB6 Secure, Pro-Active CSB6 Ultimate is renamed SpringCard CSB6 Ultimate * Unsupported: Broadcom 5880, jNet Technology jToken s1. * Disabled support of the contcatless part of SDI010 and SCR331DI. * Avoid a "Duplicate frame detected" error. * Use a very long timeout for PowerUp since the card can be very slow to send the full ATR (up to 30 seconds at 4 MHz) * Driver will work in a multi-reader configuration. - Use modalias supplements instead of eID issuer locales. - Require pcsc-lite. - Removed custom hotplug support. Now integrated in pcsc-lite. ------------------------------------------------------------------- Tue Jan 27 00:39:51 CET 2009 - ro@suse.de - added udev diretories to filelist to fix build ------------------------------------------------------------------- Tue Jan 6 19:33:03 CET 2009 - sbrabec@suse.cz - Do not call autoreconf for SLE10. ------------------------------------------------------------------- Fri Nov 14 11:30:38 CET 2008 - sbrabec@suse.cz - On request of author reverted to libusb0 to prevent errors. http://www.nabble.com/Re%3A-patch-for-libusb-0.9.3-libusb-os-linux_usbfs.c-p20421276.html ------------------------------------------------------------------- Fri Sep 5 11:53:48 CEST 2008 - sbrabec@suse.cz - Updated to version 1.3.8: * Fixes and code improvements. * New readers that should work: Should work: Pro-Active CSB6 Ultimate, id3 Semiconductors CL1356A HID, Vasco DP905, KEBTechnology KONA USB SmartCard, Precise Biometrics 250 MC, Covadis.ch Alya and Vega-Alpha. ------------------------------------------------------------------- Wed Apr 2 18:30:33 CEST 2008 - sbrabec@suse.cz - Updated to version 1.3.5: * new supported devices * documentation improves * code changes * for more see ChangeLog ------------------------------------------------------------------- Thu Jul 26 15:50:24 CEST 2007 - sbrabec@suse.cz - Updated to version 1.3.0: * code changes * crash fixes * firmware updates * new command line tools ------------------------------------------------------------------- Thu May 31 10:28:16 CEST 2007 - sbrabec@suse.cz - Build requires libusb-devel. ------------------------------------------------------------------- Tue Feb 13 15:02:14 CET 2007 - sbrabec@suse.cz - Updated to version 1.2.1: * Support for non CCID generic readers. * Supported O2Micro Oz7762. * Support for SCARD_ATTR_VENDOR_IFD_VERSION, * SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by SCardGetAttrib(). Read SCARDGETATTRIB.txt for more. * Support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32, Teo by Xiring, HP USB Smartcard Reader. * Support Extended APDU (up to 64KB) for readers in TPDU mode or Extended APDU mode. This only works for T=1 cards. * Support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim, id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520 * Support the contactless interface of the SCR331-DI-NTTCOM * Increased the USB timeout used for PIN verify/modify. * Endian fixes. * Other fixes. ------------------------------------------------------------------- Fri Nov 24 13:52:31 CET 2006 - mjancar@suse.cz - set IFSC in the SetParameters when required (#223566) ------------------------------------------------------------------- Fri Aug 11 22:28:18 CEST 2006 - stark@suse.de - update to version 1.0.1 * add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe KB USB, OmniKey CardMan 3621 * improve support of Cherry XX44 keyboard for PIN verify and change (circumvent firmware bugs) * do not use LTPBundleFindValueWithKey() from pcscd since this function has been removed from pcscd API * use -fvisibility=hidden is available to limit the number of exported symbols ------------------------------------------------------------------- Sun Apr 2 00:11:54 CEST 2006 - sndirsch@suse.de - added missing locale provides (Bug #161867) ------------------------------------------------------------------- Wed Jan 25 21:39:20 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Tue Jan 3 08:59:37 CET 2006 - mjancar@suse.cz - move to separate source package ------------------------------------------------------------------- Mon Jan 2 07:29:48 CET 2006 - stark@suse.de - removed obsolete hotplug stuff for cyberjack - Updated pcsc-lite to version 1.2.9-beta9 - Updated CCID driver to 0.9.4 - Updated GemPC driver to 1.0.0 - package pkgconfig files to be able to build drivers outside the package ------------------------------------------------------------------- Tue Dec 20 16:08:24 CET 2005 - ro@suse.de - removed unpackaged man-page symlinks ------------------------------------------------------------------- Tue Nov 29 11:59:15 CET 2005 - ro@suse.de - remove keeper from nfb (unused) ------------------------------------------------------------------- Mon Oct 10 13:02:47 CEST 2005 - stark@suse.de - Updated towitoko driver to 2.0.7 and install USB bundle ------------------------------------------------------------------- Wed Sep 21 22:17:12 CEST 2005 - stark@suse.de - Repackaged CCID as bundle for USB usage (#116497) ------------------------------------------------------------------- Tue Sep 20 06:24:30 CEST 2005 - stark@suse.de - handle old reader.conf in upgrade case - compile with -fno-strict-aliasing - fixed missing return in ctapi-cyberjack ------------------------------------------------------------------- Sat Sep 17 11:46:52 CEST 2005 - stark@suse.de - Updated pcsc-lite to version 1.2.9beta8 (#116497) * use /etc/reader.conf.d/ * adapted init script to create /etc/reader.conf - Updated cyberjack driver to version 2.0.9 * use rpath for cyberjack tools - Updated ccid driver to version 0.9.3 (#116497) - Use RPM_OPT_FLAGS everywhere - Fixed serious compiler warnings ------------------------------------------------------------------- Mon Sep 5 15:25:59 CEST 2005 - skh@suse.de - fix off-by-one error in hotplug_libusb.c [#112964] ------------------------------------------------------------------- Mon Aug 29 15:35:33 CEST 2005 - skh@suse.de - Remove unnecessary files from pcsc-acr38 again [#112927] ------------------------------------------------------------------- Mon Aug 29 14:33:44 CEST 2005 - skh@suse.de - package ACR38 driver in correct bundle format [#112927] - remove orphaned /var/run/pcscd.pub when necessary [#112928] - update ACR38u driver to version 100705 to fix crash when reader is plugged in [#112964] ------------------------------------------------------------------- Tue Aug 16 14:15:41 CEST 2005 - skh@suse.de - Updated ACR38u driver to version 100703 ------------------------------------------------------------------- Tue Jul 26 17:47:53 CEST 2005 - okir@suse.de - Added ACR38u driver ------------------------------------------------------------------- Tue Jul 26 13:29:37 CEST 2005 - okir@suse.de - Updated description in init script (#79287) ------------------------------------------------------------------- Thu Jun 16 17:12:15 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS in 1 more driver - added includes to avoid implict declaration of memcpy and similar. ------------------------------------------------------------------- Mon Apr 18 18:12:49 CEST 2005 - ro@suse.de - make it build with gcc-4 ------------------------------------------------------------------- Thu Mar 17 12:45:39 CET 2005 - okir@suse.de - Disable support for extended-apdus, it eats 32MB of memory (#73629) ------------------------------------------------------------------- Thu Mar 10 11:49:25 CET 2005 - okir@suse.de - Fix default search location for USB bundles ------------------------------------------------------------------- Fri Jan 21 15:11:43 CET 2005 - okir@suse.de - Updated to latest upstream version - Updated several drivers - Added CCID driver - Provide a more informative readers.conf file (#42620) ------------------------------------------------------------------- Thu Jan 20 12:46:44 CET 2005 - ro@suse.de - drop subpackage gpr400 ------------------------------------------------------------------- Wed Apr 28 18:20:35 CEST 2004 - ro@suse.de - compile formaticc with no-strict-aliasing - fix unused return type in musclecard.c ------------------------------------------------------------------- Wed Mar 31 09:18:42 CEST 2004 - okir@suse.de - Properly install testpcsc, formaticc (#37625) - Build towitoko driver with --enable-win32-com ------------------------------------------------------------------- Thu Mar 18 13:41:02 CET 2004 - okir@suse.de - cyberjack apps installed in /bin should be executable (#36409) ------------------------------------------------------------------- Sat Jan 10 18:16:21 CET 2004 - adrian@suse.de - add %run_ldconfig ------------------------------------------------------------------- Tue Aug 5 14:53:48 CEST 2003 - mge@suse.de - merge ctapi-cyberjack into pcsc-lite: two additional packages are created: ctapi-cyberjack and pcsc-cyberjack ------------------------------------------------------------------- Thu Jun 26 01:17:52 CEST 2003 - ro@suse.de - remove unpackaged files from buildroot - added directories to filelist ------------------------------------------------------------------- Fri Nov 29 15:49:25 CET 2002 - okir@suse.de - added -fPIC when building eToken driver ------------------------------------------------------------------- Fri Nov 29 10:14:46 CET 2002 - okir@suse.de - Updated to latest upstream version - Included driver for Aladdin eToken PRO - More GNU auto#*@! headaches - Various minor fixes ------------------------------------------------------------------- Wed Aug 28 12:37:15 CEST 2002 - okir@suse.de - Moved shared objects to /usr/lib64 on ppc64/s390x (#18421) ------------------------------------------------------------------- Mon Aug 5 14:27:44 CEST 2002 - olh@suse.de - fix initscript, Should-start: setserial hotplug ------------------------------------------------------------------- Fri Aug 2 09:38:11 CEST 2002 - okir@suse.de - added PreReq for insserv_and_fillup ------------------------------------------------------------------- Wed Jul 31 17:46:00 CEST 2002 - okir@suse.de - fixed build problem on s390x (force aclocal.m4 regen) ------------------------------------------------------------------- Wed Jun 26 01:56:16 CEST 2002 - ro@suse.de - use -fPIC when building a shared lib ------------------------------------------------------------------- Wed Jun 12 13:26:14 CEST 2002 - okir@suse.de - fix for bug #15051 (hey, it's a palindrome bug:): missing %doc DRIVERS file; misc silly binaries moved out of /usr/bin ------------------------------------------------------------------- Tue Apr 30 14:45:30 CEST 2002 - okir@suse.de - Fixed build problem introduced by previous patch ------------------------------------------------------------------- Tue Apr 30 09:41:09 CEST 2002 - okir@suse.de - updated to latest upstream version - added drivers for these readers: Towitoko, Schlumberger Reflex 6x, Gemplus GPR 400, GemPlus GemPC 410/430 ------------------------------------------------------------------- Tue Apr 9 01:37:41 CEST 2002 - ro@suse.de - fixed for latest automake/autoconf ------------------------------------------------------------------- Wed Feb 13 08:13:59 CET 2002 - stark@suse.de - spec-file cleanup - LSB compliant init-script ------------------------------------------------------------------- Mon Jan 14 12:54:01 CET 2002 - ro@suse.de - removed START_PCSCD ------------------------------------------------------------------- Wed Nov 14 08:49:11 CET 2001 - ro@suse.de - call aclocal ------------------------------------------------------------------- Sun Aug 26 02:28:00 MET 2001 - mge@suse.de - updated to 1.0.0Beta - fixed /etc/init.d/pcscd status-handling (bug #9069) ------------------------------------------------------------------- Thu Jun 7 02:27:01 CEST 2001 - ro@suse.de - fix broken Makefile.am ------------------------------------------------------------------- Mon Apr 23 00:32:27 MEST 2001 - mge@suse.de - update to 0.9.1 ------------------------------------------------------------------- Thu Apr 19 00:18:46 CEST 2001 - mge@suse.de - created package
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
