File u-boot-cubieboard.changes of Package u-boot-bananapi
-------------------------------------------------------------------
Fri Jul 17 06:42:37 UTC 2015 - afaerber@suse.de
- Add u-boot-merriia80optimus
-------------------------------------------------------------------
Wed Jul 15 13:05:24 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07
-------------------------------------------------------------------
Tue Jun 30 07:34:49 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc3
- Remove upstreamed patches:
* enable_spl_ext_support_for_ti_armv7.patch
* fix_slow_mmc_on_rpi.patch
-------------------------------------------------------------------
Thu Jun 18 12:07:10 UTC 2015 - guillaume@opensuse.org
- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi
- Rework patches (to be upstreamable):
* enable_spl_ext_support_for_ti_armv7.patch
* mx53loco-bootscr.patch
- Remove fix_beagle_spl_build.patch
-------------------------------------------------------------------
Wed Jun 10 10:07:23 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc2
- Update drop-marvell.patch
-------------------------------------------------------------------
Wed May 27 10:07:49 UTC 2015 - guillaume@opensuse.org
- Update to 2015.07-rc1:
- Update drop-marvell.patch
- Remove no more needed add_snow_usb_boot.patch
-------------------------------------------------------------------
Wed Apr 29 07:51:25 UTC 2015 - dmueller@suse.com
- adjust copyright headers
-------------------------------------------------------------------
Thu Apr 16 08:34:11 UTC 2015 - guillaume@opensuse.org
- update to 2015.04
- Remove upstreamed patch:
0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
- Follow upstream board rename colibri_t20_iris => colibri_t20
-------------------------------------------------------------------
Sun Apr 12 19:49:41 UTC 2015 - xxxxxmichl@googlemail.com
- Added support for A13-OLinuXino, A13-OLinuXino-MICRO,
A20-OLinuXino-MICRO and A20-OLinuXino-LIME from
www.olimex.com
-------------------------------------------------------------------
Thu Apr 9 07:56:40 UTC 2015 - guillaume@opensuse.org
- Remove u-boot-vexpressaemv8a (dropped upstream and we now use EFI)
-------------------------------------------------------------------
Thu Apr 2 09:13:49 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc5
-------------------------------------------------------------------
Mon Mar 23 08:39:40 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc4
-------------------------------------------------------------------
Wed Mar 4 15:51:55 UTC 2015 - guillaume@opensuse.org
- Add 0001-Exynos-Clock-Fix-exynos5_get_periph_rate-for-I2C.patch
to fix keyboard on Chromebook
-------------------------------------------------------------------
Wed Mar 4 15:46:52 UTC 2015 - guillaume@opensuse.org
- update to 2015.04-rc3
- update patch: drop-marvell.patch
-------------------------------------------------------------------
Thu Feb 26 16:48:35 UTC 2015 - guillaume@opensuse.org
- Update add_snow_usb_boot.patch to boot on USB2 instead of USB3
-------------------------------------------------------------------
Wed Feb 25 15:47:07 UTC 2015 - guillaume@opensuse.org
- Remove unneeded fix_snow_config.patch
-------------------------------------------------------------------
Tue Feb 24 09:48:50 UTC 2015 - guillaume@opensuse.org
- Add rpi2 armv7 board
-------------------------------------------------------------------
Fri Feb 20 12:31:38 UTC 2015 - guillaume@opensuse.org
- Update to 2015.04-rc2
-------------------------------------------------------------------
Fri Feb 20 10:04:14 UTC 2015 - guillaume@opensuse.org
- Update to 2015.04-rc1
* Remove upstreamed patch pcm051-bootscr.patch
* Remove no more used patch fix_bootpart_snow_only.patch (now u-boot
scan all known partitions, so no need to set a different boot partition)
-------------------------------------------------------------------
Sun Jan 25 20:20:46 UTC 2015 - matwey.kornilov@gmail.com
- Enable pcm051rev3 for Phytec Wega board
* Add pcm051-bootscr.patch: add bootscript support (upstreamed in 2015.04-rc1)
-------------------------------------------------------------------
Tue Jan 13 14:32:17 UTC 2015 - guillaume@opensuse.org
- Update to 2015.01:
* Drop upstreamed patches:
- 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
- fix_sata.patch
* Update partially upstreamed mx53loco-bootscr.patch
-------------------------------------------------------------------
Tue Dec 16 11:10:23 UTC 2014 - guillaume@opensuse.org
- Backport SPL MMC raw boot mode fix:
* 0001-spl-mmc-Fix-raw-boot-mode-related-to-commit.patch
-------------------------------------------------------------------
Sat Dec 13 12:12:41 UTC 2014 - xxxxxmichl@googlemail.com
- Added support for A20-OLinuXIno-LIME2 and A10-OLinuXino-LIME from
www.olimex.com
-------------------------------------------------------------------
Tue Dec 9 11:23:41 UTC 2014 - guillaume@opensuse.org
- Rename XLOADER to OMAP_SPL in pre_checkin.sh and u-boot.spec.in
-------------------------------------------------------------------
Tue Dec 9 09:15:27 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc3
* Drop upstreamed/unneeded patches:
- 0001-exynos-Enable-config_distro_defaults.h.patch
- 0002-exynos5-Use-config_distro_bootcmd.h.patch
- boot_mode_fallback.patch
- fix_snow_usb_support
- fix_spl_ext.patch
- fix_arm_hf_toolchain.patch
- origen-ext2.patch
* Update patch:
- fix_snow_config.patch
* Follow upstream: rpi_b config renamed to rpi
-------------------------------------------------------------------
Tue Dec 2 12:41:55 UTC 2014 - guillaume@opensuse.org
- Update snow (chromebook)
* Update patch:
- fix_snow_config.patch patch
* Add patches:
- add_snow_usb_boot.patch to be able to boot from USB0
- fix_bootpart_snow_only.patch to boot on partition #2 (snow only!)
* Backport patches:
- fix_snow_usb_support.patch to fix USB on snow
- 0001-exynos-Enable-config_distro_defaults.h.patch
- 0002-exynos5-Use-config_distro_bootcmd.h.patch
* Drop unneeded/obsolete patches:
- fix_exynos5_text_base.patch
- fix_snow_extra_env_settings.patch
-------------------------------------------------------------------
Sun Nov 30 13:17:33 UTC 2014 - guillaume@opensuse.org
- Add Bananapi initial support
-------------------------------------------------------------------
Tue Nov 25 08:29:14 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc2
- Update patch fix_omap_boot_mode.patch to be upstreamable and
rename it to boot_mode_fallback.patch
- Drop obsolete patch: arndale.patch
- Add patches:
* fix_arm_hf_toolchain.patch: fix build with hard float toolchain
* fix_spl_ext.patch: fix SPL EXT error checks
* fix_sata.patch: fix sata support and fix also mx53loco build
-------------------------------------------------------------------
Wed Nov 19 21:44:17 CET 2014 - guillaume.gardet@opensuse.org
- Fix mx53loco-bootscr.patch
-------------------------------------------------------------------
Mon Nov 17 21:15:50 UTC 2014 - oscar@naiandei.net
- Add u-boot-with-sunxi-spl.bin for sunxi boards
-------------------------------------------------------------------
Mon Nov 17 15:17:56 UTC 2014 - guillaume@opensuse.org
- Make use of RPM_OPT_FLAGS during make
-------------------------------------------------------------------
Sat Nov 15 14:55:06 UTC 2014 - guillaume@opensuse.org
- Fix sunxi boards (use u-boot.img instead of u-boot.bin)
- Remove duplicated default install line
-------------------------------------------------------------------
Tue Nov 11 13:32:36 UTC 2014 - guillaume@opensuse.org
- Update to 2015.01-rc1
- Drop upstreamed patches:
* add_spl_extfs_support.patch
* ti_common_initrd_support.patch
- Refresh patch:
* drop-marvell.patch
- Drop CREDITS file from DOC (dropped upstream)
-------------------------------------------------------------------
Mon Nov 3 10:19:42 UTC 2014 - guillaume@opensuse.org
- Apply fix_omap_boot_mode.patch only for omap3/omap4 boards
-------------------------------------------------------------------
Tue Oct 14 13:22:44 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10
- Drop upstreamed patch:
* fix_sabrelite_boot.scr.patch
- Refresh patches:
* arndale.patch
* fix_snow_config.patch
* fix_exynos5_text_base.patch
* exynos5-dt.h.patch (renamed fix_snow_extra_env_settings.patch)
-------------------------------------------------------------------
Wed Oct 8 07:52:48 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10-rc3
- Drop upstreamed patches:
* beagle-bootscr.patch
* panda-bootscr.patch
* am335x_evm-bootscr.patch
- Refresh patches:
* fix_sabrelite_boot.scr.patch
* drop-marvell.patch
* add_spl_extfs_support.patch
- Add a new patch to fix omap3beagle spl build:
* fix_beagle_spl_build.patch
-------------------------------------------------------------------
Mon Sep 8 13:06:52 UTC 2014 - guillaume@opensuse.org
- Drop Hyundai_a7hd and cubox-i boards (now handle in Contrib repos
since it is not upstreamed), so drop related patches:
* v2014.04-sunxi.patch
* cubox-i-v2014.04-port.patch
* cubox-i-enable_raw_rd.patch
-------------------------------------------------------------------
Wed Sep 3 12:02:22 UTC 2014 - guillaume@opensuse.org
- Update to version 2014.10-rc2
- drop upstreamed patch rpi_b-bootscr.patch
- drop fix_spl_build_for_am335x.patch (does build without it)
- Refresh patches:
* drop-marvell.patch
* fix_snow_config.patch
-------------------------------------------------------------------
Thu Aug 21 08:50:10 UTC 2014 - guillaume@opensuse.org
- Update SPL EXT fs support:
* For omap boards (beagle and panda), SPL now looks for u-boot.img
as upstream instead of u-boot.bin
* Remove mlo-ext2.patch to make proper patches in
order to ease upstreaming our EXT fs SPL functions
* Add panda-bootscr.patch to fix panda boot (was included in
mlo-ext2.patch)
* Add fix_omap_boot_mode.patch to fix beagle and panda boot mode
(was included in mlo-ext2.patch)
* Add add_spl_extfs_support.patch to get proper SPL EXT fs functions
* Add enable_spl_ext_support_for_ti_armv7.patch to enable SPL EXT fs
support for TI ARMv7 boards
-------------------------------------------------------------------
Tue Aug 19 17:35:22 UTC 2014 - matwey.kornilov@gmail.com
- Update to version 2014.10-rc1 and update patches
-------------------------------------------------------------------
Thu Jul 31 13:59:00 UTC 2014 - dimstar@opensuse.org
- Rename rpmlintrc to %{name}-rpmlintrc.
Follow the packaging guidelines.
-------------------------------------------------------------------
Sat Jun 14 11:58:43 UTC 2014 - afaerber@suse.de
- add u-boot-cubietruck for Cubietruck (Cubieboard 3)
-------------------------------------------------------------------
Thu Jun 12 18:52:26 UTC 2014 - josua.m@t-online.de
- add u-boot-mx6cubox-i for Cubox-i and Hummingboard
* currently conflicts with mlo-ext2 patch for omap4
so only for cubox-i target mlo-ext2.patch is skipped
and cubox-i patches are applied
* patch source: https://github.com/vorlonofportland/u-boot/
cubox-i-v2014.04-port.patch
cubox-i-enable_raw_rd.patch
-------------------------------------------------------------------
Tue Apr 29 13:41:18 UTC 2014 - guillaume@opensuse.org
- Enhance pre_checkin.sh script to handle arch restrictions
-------------------------------------------------------------------
Tue Apr 29 13:18:48 UTC 2014 - guillaume@opensuse.org
- Fix builds :
* 'tools' target is now 'tools-only'
* kermit scripts moved from 'tools/scripts' to 'tools/kermit/'
* Enhanced pre_checkin.sh script to handle uppercases in config name
* Renamed config from cubieboard to Cubieboard
* Renamed config from cubieboard2 to Cubieboard2
* Renamed config from hyundai_a7hd to Hyundai_A7HD
* Renamed config from mele_a1000 to Mele_A1000
-------------------------------------------------------------------
Tue Apr 29 13:06:57 UTC 2014 - guillaume@opensuse.org
- Add vexpress_aemv8a board
-------------------------------------------------------------------
Tue Apr 29 08:33:48 UTC 2014 - guillaume@opensuse.org
- Update to v2014.04
* Update mlo-ext2.patch
* Update mx53loco-bootscr.patch
* Update origen-ext2.patch
* Dropped v2014.01-sunxi.patch and created
v2014.04-sunxi.patch by diffing u-boot-2014.04 with
u-boot-sunxi.git d9fe0a1e061e2bde6c24a0f7cef4f5023f3bd579
* Update rpi_b-bootscr.patch
* Drop gnuhash.patch (upstreamed)
-------------------------------------------------------------------
Thu Mar 27 14:22:23 UTC 2014 - guillaume@opensuse.org
- add u-boot-mx6qsabrelite (for iMX6 Sabre Lite board)
-------------------------------------------------------------------
Wed Feb 5 15:07:30 UTC 2014 - guillaume@opensuse.org
- add u-boot-snow (for Chromebook ARM)
-------------------------------------------------------------------
Wed Feb 5 14:59:29 UTC 2014 - guillaume@opensuse.org
- Fix boot.scr location for beagle and origen
-------------------------------------------------------------------
Thu Jan 30 14:28:34 UTC 2014 - dmueller@suse.com
- add u-boot-cubieboard2
-------------------------------------------------------------------
Thu Jan 30 06:46:45 UTC 2014 - afaerber@suse.de
- Drop 0006-ARMV7-hardfp-build-fix.patch:
v2014.01 checks if -msoft-float compiles okay, and
U-Boot is soft-float according to Tom Rini
-------------------------------------------------------------------
Tue Jan 28 15:29:14 UTC 2014 - guillaume@opensuse.org
- Disable CONFIG_SPL_OS_BOOT for ti armv7 configs with
fix_spl_build_for_am335x.patch to reduce size of am335x SPL
-------------------------------------------------------------------
Sat Jan 26 22:46:44 UTC 2014 - afaerber@suse.de
- Update to v2014.01
* Manually updated 0006-ARMV7-hardfp-build-fix.patch
* Dropped v2013.10-sunxi.patch and created
v2014.01-sunxi.patch by merging u-boot.git v2014.01 onto
u-boot-sunxi.git e4a0232e173577893604b94fc3af7c047570970b
* Added gnuhash.patch to fix .gnu.hash section handling in ldscripts
* Rebased mlo-ext2.patch:
omap4_common.h CONFIG_SUPPORT_RAW_INITRD hunk is now covered by
ti_common_initrd_support.patch.
am335xevm build is known breaking due to size constraints not
trivially solvable without dropping our patch.
-------------------------------------------------------------------
Sun Jan 26 12:14:10 UTC 2014 - afaerber@suse.de
- Fix regression in packaging u-boot-dtb-tegra.bin:
There is in fact a u-boot-spl.bin SPL being built,
but it is 0xff-padded as u-boot-spl-pad.bin and then
prepended to u-boot.bin and the .dtb.
u-boot-dtb.bin exists independently as just u-boot.bin and .dtb,
so give preference to u-boot-dtb-tegra.bin over u-boot-dtb.bin.
-------------------------------------------------------------------
Mon Jan 20 14:05:13 UTC 2014 - agraf@suse.com
- The "Tegra SPL" is not an SPL but a differently named u-boot.bin
file. Fix up the generation scripts.
-------------------------------------------------------------------
Sun Jan 19 00:09:41 UTC 2014 - afaerber@suse.de
- Include Tegra SPL for Colibri T20
-------------------------------------------------------------------
Wed Jan 8 17:26:10 UTC 2014 - agraf@suse.com
- switch raspberry to ext2
-------------------------------------------------------------------
Wed Jan 8 13:41:32 UTC 2014 - matwey.kornilov@gmail.com
- am335x_evm-bootscr.patch: Search for files in /boot, not in /boot/boot
-------------------------------------------------------------------
Wed Jan 8 02:07:44 UTC 2014 - afaerber@suse.de
- rpi_b-bootscr.patch: Change rpi_b to use boot.scr
-------------------------------------------------------------------
Tue Jan 7 16:01:13 UTC 2014 - dmueller@suse.com
- remove origin flavor
-------------------------------------------------------------------
Mon Jan 6 22:57:05 UTC 2014 - afaerber@suse.de
- Enable paz00 config (Toshiba AC100)
-------------------------------------------------------------------
Mon Jan 6 21:34:03 UTC 2014 - afaerber@suse.de
- Enable colibri_t20_iris config (Toradex Colibri-T20 on Iris)
- Update u-boot.spec.in copyright and fix typo in comment
-------------------------------------------------------------------
Sat Jan 4 01:47:50 UTC 2014 - agraf@suse.com
- prefer u-boot-dtb.bin over u-boot.bin
- simplify files section
-------------------------------------------------------------------
Fri Jan 3 16:54:30 UTC 2014 - dmueller@suse.com
- mlo-ext2.patch: Search for files in /boot, not in /boot/boot
-------------------------------------------------------------------
Mon Dec 30 18:37:50 UTC 2013 - matwey.kornilov@gmail.com
- Add am335x_evm-bootscr.patch: Add bootscr to AM335x
platform based devices
-------------------------------------------------------------------
Tue Dec 17 14:33:52 UTC 2013 - guillaume@opensuse.org
- Remove old unused patches:
* v2013.04-sunxi.patch
* loadaddr-defaults.patch
-------------------------------------------------------------------
Tue Dec 17 14:10:51 UTC 2013 - guillaume@opensuse.org
- Add ti_common_initrd_support.patch to enable initrd support for
AM335x boards
-------------------------------------------------------------------
Tue Dec 17 14:03:50 UTC 2013 - guillaume@opensuse.org
- Add am335x_evm support which includes: Beagle Bone,
Beagle Bone Black, TI AM335x EVM, TI AM335x EVM-SK
-------------------------------------------------------------------
Tue Nov 26 13:46:22 UTC 2013 - guillaume@opensuse.org
- Add Arndale support
-------------------------------------------------------------------
Tue Nov 26 13:05:10 UTC 2013 - guillaume@opensuse.org
- Update v2013.04-sunxi.patch to v2013.10-sunxi.patch
-------------------------------------------------------------------
Mon Nov 25 10:05:48 UTC 2013 - guillaume@opensuse.org
- Remove kerneladdr and ramdiskaddr definition in u-boot patches
(now done in JeOS image with u-boot hooks)
- Update patches to current version:
* 0006-ARMV7-hardfp-build-fix.patch
* beagle-bootscr.patch
* mx53loco-bootscr.patch
* mlo-ext2.patch
- Merge fix_omap4_ext2_boot.patch in mlo-ext2.patch
- Rename exynos-ext2.patch in origen-ext2.patch
-------------------------------------------------------------------
Mon Nov 25 09:57:12 UTC 2013 - guillaume@opensuse.org
- Update to 2013.10
-------------------------------------------------------------------
Fri Nov 22 16:25:36 UTC 2013 - guillaume@opensuse.org
- Fix OMAP4 pandaboard EXT2 boot
-------------------------------------------------------------------
Fri Sep 13 11:31:14 UTC 2013 - guillaume@opensuse.org
- Fix u-boot.bin and boot.scr place since they are now in boot/ folder.
-------------------------------------------------------------------
Wed May 1 20:48:30 UTC 2013 - dmueller@suse.com
- add support for cubieboard, hyundaia7hd, melea1000
-------------------------------------------------------------------
Wed May 1 08:18:26 UTC 2013 - dmueller@suse.com
- update to 2013.04
* no upstream changelog available
- remove dead u-boot-raspberrypi* (actually called rpib now)
- add rpib variant
-------------------------------------------------------------------
Thu Apr 11 17:05:58 UTC 2013 - guillaume.gardet@opensuse.org
- add omap3_beagle to targets
-------------------------------------------------------------------
Thu Apr 11 16:05:41 UTC 2013 - dmueller@suse.com
- remove u8500href subpackage, kernel got dropped
-------------------------------------------------------------------
Sun Apr 7 14:32:20 UTC 2013 - agraf@suse.com
- update to 2013.04rc2
- enable bootz support on all boards
-------------------------------------------------------------------
Wed Mar 20 07:21:06 UTC 2013 - agraf@suse.com
- fix mlo-ext2.patch to actually use the ext4 infrastructure
-------------------------------------------------------------------
Sat Jan 26 10:38:07 UTC 2013 - dmueller@suse.com
- update mlo-ext2.patch:
* use the ext4 driver now since ext2 got removed
-------------------------------------------------------------------
Wed Oct 24 22:33:13 UTC 2012 - agraf@suse.com
- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch:
* backport upstream sdhc fixes
-------------------------------------------------------------------
Wed Oct 24 01:37:36 CEST 2012 - agraf@suse.de
- update to 2012.10:
- refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch,
loadaddr-defaults.patch, mx53loco-bootscr.patch
-------------------------------------------------------------------
Mon Oct 22 12:00:22 UTC 2012 - agraf@suse.com
- fix origen by putting the ramdisk higher
-------------------------------------------------------------------
Mon Aug 6 09:39:54 UTC 2012 - dmueller@suse.com
- remove Marvell sources as they are non-free licensed (bnc#773824)
-------------------------------------------------------------------
Thu Jul 26 18:21:44 UTC 2012 - agraf@suse.com
- fix ext2 support for origen
- add origen-spl.bin for origen
-------------------------------------------------------------------
Thu Jul 26 09:47:31 UTC 2012 - dmueller@suse.com
- merge u-boot-tools
-------------------------------------------------------------------
Wed Jul 25 21:05:08 UTC 2012 - agraf@suse.com
- add ext2 support by default in mx53loco
-------------------------------------------------------------------
Tue Jul 24 21:28:59 UTC 2012 - agraf@suse.com
- add support for mx53loco
-------------------------------------------------------------------
Tue Jul 24 11:25:42 UTC 2012 - dmueller@suse.com
- remove u-boot-omap3beagle
-------------------------------------------------------------------
Mon Jul 23 22:34:04 UTC 2012 - agraf@suse.com
- bump to 2012.04.01
- fixes bug in cmdline parsing
-------------------------------------------------------------------
Mon Jul 23 22:26:47 UTC 2012 - agraf@suse.com
- add calxeda highbank support
-------------------------------------------------------------------
Thu Jul 12 12:51:56 UTC 2012 - agraf@suse.com
- autoload boot.scr on beagle, so we can boot again
-------------------------------------------------------------------
Thu Jul 12 08:12:15 UTC 2012 - agraf@suse.com
- update to upstream u-boot 2012.04
-> gets rid of linaro fork, only mainline now
-> gets us omap3 MLO support, no more need for x-loader
-> potentially fixes voltage issues on omap4
-------------------------------------------------------------------
Thu Jun 14 09:04:53 UTC 2012 - adrian@suse.de
- add SUSE style conflicts to avoid installation of multiple
boot loaders
-------------------------------------------------------------------
Tue Apr 17 11:59:55 UTC 2012 - joop.boonen@opensuse.org
- Included u-boot.spec.in and gen_spec.sh in the spec file
-------------------------------------------------------------------
Mon Feb 6 13:25:09 UTC 2012 - agraf@suse.com
- use ext2 on panda
-------------------------------------------------------------------
Tue Dec 20 02:36:05 UTC 2011 - agraf@suse.com
- use ttyO2 as default console= on OMAP boards
-------------------------------------------------------------------
Mon Dec 19 20:21:21 UTC 2011 - agraf@suse.com
- add u8500_href and origen configs
-------------------------------------------------------------------
Fri Dec 16 16:03:01 UTC 2011 - agraf@suse.com
- fix lint failures
-------------------------------------------------------------------
Fri Dec 16 14:46:53 CET 2011 - agraf@suse.com
- don't install map
-------------------------------------------------------------------
Fri Dec 16 02:16:19 UTC 2011 - agraf@suse.com
- generalize spec file to be able to build for more boards
- add beagle board spec file
- remove boot.scr
-------------------------------------------------------------------
Fri Dec 16 01:15:47 UTC 2011 - agraf@suse.com
- rename to u-boot-omap4panda
-------------------------------------------------------------------
Tue Dec 13 17:24:45 UTC 2011 - dkukawka@suse.de
- new package based on u-boot-omap4panda but use linaro u-boot git
repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git)
instead of mainline u-boot. This package also contains the MLO
(this package obsoletes the x-loader package)
-------------------------------------------------------------------
Tue Nov 29 22:53:44 UTC 2011 - joop.boonen@opensuse.org
- COPYING CREDITS README are now in the standard package
-------------------------------------------------------------------
Thu Nov 24 21:08:58 UTC 2011 - joop.boonen@opensuse.org
- Corrected the links
-------------------------------------------------------------------
Tue Nov 22 17:47:17 UTC 2011 - joop.boonen@opensuse.org
- Build without u-boot tools as we have a u-boot-tools packages
-------------------------------------------------------------------
Sun Nov 20 17:00:43 UTC 2011 - joop.boonen@opensuse.org
- Cleaned the spec file up the spec file
- The name is the same as the package name
-------------------------------------------------------------------
Sun Nov 13 13:13:39 UTC 2011 - joop.boonen@opensuse.org
- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot
- Using .txt config file instead of .scr it's gerated via mkimage
-------------------------------------------------------------------
Wed Nov 09 22:55:09 UTC 2011 - joop.boonen@opensuse.org
- Used scr file based on http://elinux.org definition
- Build u-boot 20111109
- Used the Meego panda u-boot as a base
-------------------------------------------------------------------
Fri Feb 18 00:00:00 UTC 2011 - raghuveer.murthy@ti.com>
- 2010.09-MeeGo
- Fix for u-boot fails to compile on armv7hl, BMC#13140
-------------------------------------------------------------------
Thu Nov 18 00:00:00 UTC 2010 - peter.j.zhu@intel.com>
- 2010.09-MeeGo
- Don't build against i586, BMC#10159
-------------------------------------------------------------------
Tue Oct 10 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09-MeeGo
- Add Das u-boot package - FEA#9723
-------------------------------------------------------------------
Tue Oct 10 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Added option to enable boot.scr generation and copy
-------------------------------------------------------------------
Mon Oct 04 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Update to 2010.09
-------------------------------------------------------------------
Wed Sep 14 00:00:00 UTC 2010 - nm@ti.com>
- 2010.09.rc1-MeeGo
- Update to 2010.09.rc1
- MeeGo customization
- Enabled PandaBoard, Beagleboard build
-------------------------------------------------------------------
Wed Mar 31 00:00:00 UTC 2010 - silvan.calarco@mambasoft.it>
- 2009.11.1-1mamba
- update to 2009.11.1
-------------------------------------------------------------------
