Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP2:Update
dracut.3137
dracut.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File dracut.changes of Package dracut.3137
------------------------------------------------------------------- Wed Aug 31 19:06:19 UTC 2016 - trenn@suse.de - Add missing whitespace for md raid suse kernel param parsing (bsc#970215) *modify: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch ------------------------------------------------------------------- Thu Jul 7 02:39:06 UTC 2016 - lduncan@suse.com - update iscsi module setup: test iscsi for flash directory before continuing, adding (bsc#975959): * 0315-test-iscsi-for-flash-directory-before-continuing.patch ------------------------------------------------------------------- Thu Jan 14 10:22:20 UTC 2016 - pwieczorkiewicz@suse.com - Add 0314-network_set_mtu_macaddr_for_dhcp.patch: - Set MTU and LLADDR for DHCP if specified (boo#959803) ------------------------------------------------------------------- Wed Nov 11 08:00:16 UTC 2015 - thomas.blume@suse.com - wait for netroot until all iBFT interfaces are up (bsc#951003) * add 0313-ibft-wait-for-session-on-all-paths.patch ------------------------------------------------------------------- Tue Nov 10 15:16:10 UTC 2015 - thomas.blume@suse.com - skip ibft setup via dhcp if dhcp ip is 0.0.0.0 (bsc#953361) Added 0312-iscsi-skip-ibft-invalid-dhcp.patch ------------------------------------------------------------------- Mon Nov 9 16:28:22 UTC 2015 - fvogt@suse.com - Modify 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch - Add notice (bsc#952491) ------------------------------------------------------------------- Mon Nov 9 15:35:28 UTC 2015 - fvogt@suse.com - Refresh patches with line offsets: M 0146-dracut.sh-corrected-logfile-check.patch M 0182-fix_add_drivers_hang.patch M 0183-kernel-modules-Fix-storage-module-selection-for-sdhc.patch ------------------------------------------------------------------- Mon Nov 9 15:17:01 UTC 2015 - fvogt@suse.com - Modify 0181-load-xhci-pci.patch: - Add hid-logitech-hidpp - Ignore errors for xhci-pci, ehci-platform and hid-logitech-hidpp - bsc#952491, bsc#935563 and boo#953035 ------------------------------------------------------------------- Mon Nov 9 13:49:09 UTC 2015 - fvogt@suse.com - Add 0311-less_pointless_module_errors.patch (bsc#952491 and bsc#935563) - Don't warn if installing built-in modules fails - Don't print the error message twice - Modify 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch and 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch - Fixes bnc#935338 - Use mktemp instead of hardcoded filenames, possible vulnerability ------------------------------------------------------------------- Tue Oct 20 08:32:26 CEST 2015 - hare@suse.de - Clean up whitespaces: * modified 0133-Allow-multiple-configurations-per-network-interface-.patch * modified 0180-replace-iscsistart-with-systemd-service-files.patch - Add missing patch header: * modified 0181-load-xhci-pci.patch * modified 0182-fix_add_drivers_hang.patch * modified 0305-static_network_setup_return_zero.patch * modified 0306-iscsi_set_boot_protocol_from_ifcfg.patch * modified 0308-s390-update_active_devices_initrd.patch - Renamed patches: * 0181-kernel-modules-Fix-storage-module-selection-for-sdhc.patch to 0183-kernel-modules-Fix-storage-module-selection-for-sdhc.patch * 0182-kernel-modules-increase-SDHCI-driver-inclusion.patch to 0184-kernel-modules-increase-SDHCI-driver-inclusion.patch * 0200-fix_nfs_with_ip_instead_of_hostname.patch to 0185-fix_nfs_with_ip_instead_of_hostname.patch * 0201-modsign_fix_keyctl_install.patch to 0186-modsign_fix_keyctl_install.patch * 0210-do_not_fall_back_into_root_shell_on_error.patch to 0187-Do-not-open-an-unprotected-root-shell-on-failure.patch * s390_dasd_install_collect.patch to 0188-95dasd_rules-Install-collect-udev-helper-binary.patch - Do not call iscsistart (bsc#951003) * Removed 0307-iscsi_multipath_fixes.patch * Added 0307-95iscsi-Set-number-of-login-retries.patch - Fixup booting from qla4xxx (bsc#951003) * Added 0309-95iscsi-Do-not-require-network-for-qla4xxx-flash-ses.patch * Added 0310-95iscsi-set-rd.iscsi.firmware-for-qla4xxx-sessions.patch ------------------------------------------------------------------- Wed Oct 14 12:20:15 UTC 2015 - trenn@suse.de - Always install dm-snaphost module if lvm dracut module is needed, even if dm-snampshot is not loaded on the host yet (bsc#947518) M 0128-90lvm-Install-dm-snapshot-module.patch ------------------------------------------------------------------- Fri Sep 25 07:49:26 UTC 2015 - fvogt@suse.com - Add 0181-load-xhci-pci.patch (boo#939411) - Add 0182-fix_add_drivers_hang.patch from Base:System (bsc#923116) ------------------------------------------------------------------- Wed Sep 23 14:56:34 UTC 2015 - trenn@suse.de - Revert: 0176-Parse-rootflags-correctly.patch bnc#940100 The patch caused a regression and added quite some complexity. The bug (912734) which got fixed by the reverted patch is solved via documentation TID for now. It is worked (mainline/factory) for a proper solution which might get added later when properly tested. ------------------------------------------------------------------- Tue Sep 22 09:01:05 UTC 2015 - thomas.blume@suse.com - update active_devices.txt from /boot/zipl device (bsc#939101) * Add 0308-s390-update_active_devices_initrd.patch ------------------------------------------------------------------- Thu Sep 17 13:17:22 UTC 2015 - fvogt@suse.com - Replace 0181-dracut-add-trivial-vconsole-fontmap.patch (bad workaround, only works for a single case) and 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch (didn't work) by 0172-i18n_add_correct_fontmaps.patch. - Solves bsc#943312, boo#932981 and bnc#904533 correctly. ------------------------------------------------------------------- Wed Sep 9 08:56:09 UTC 2015 - thomas.blume@suse.com - fix systemd-vconsole-error in initrd (bsc#943312) Add 0181-dracut-add-trivial-vconsole-fontmap.patch ------------------------------------------------------------------- Mon Sep 7 13:34:06 UTC 2015 - trenn@suse.de - Check for existance of link targets (/run) bsc#922676 - Remove exit 0 from do-convertfs.sh which is used as a pre-pivot hook and hooks get sourced, cmp with: modules.d/99base/dracut-lib.sh: source_all "/lib/dracut/hooks/$_dir" "$@" So hooks must not use exit! bsc#922676 This fixes the critical bug for s390x kiwi images which need the symlink from /var/run to /run and additional later hooks. Modify: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch - Incorporate other convertfs patch (one liner) into this patch as well and delete: 0168-convertrunfs-Fix-typo.patch ------------------------------------------------------------------- Wed Sep 2 07:00:30 UTC 2015 - thomas.blume@suse.com - port iscsi network setup and multipath fixes from SLES12 GM to SP1 (bsc#919179) *Add 0305-static_network_setup_return_zero.patch *Add 0306-iscsi_set_boot_protocol_from_ifcfg.patch *Add 0307-iscsi_multipath_fixes.patch ------------------------------------------------------------------- Wed Aug 19 15:21:48 CEST 2015 - tiwai@suse.de - Fix the boot from SD/MMC card, including sdhci-* kernel modules into initrd (bnc#942361): 0181-kernel-modules-Fix-storage-module-selection-for-sdhc.patch 0182-kernel-modules-increase-SDHCI-driver-inclusion.patch ------------------------------------------------------------------- Thu Aug 13 12:08:33 UTC 2015 - trenn@suse.de - Fix dmraid (bnc#905746, bnc#940585): * Add 0300-mdraid_tell_mainloop_if_we_make_progress.patch 0301-systemd_initqueue_continue_waiting_if_any_timeout_script_makes_progress.patch 302-dracut-systemd_rootfs-generator.sh_always_create_generated _files.patch 0303-crypt_parse-crypt.sh_hide_encrypted_devices_from_systemd_timeout_warnings.patch 0304-dmraid_use_udev.patch - Do not open an unprotected root shell on failure (bnc#936736) * Add 0210-do_not_fall_back_into_root_shell_on_error.patch ------------------------------------------------------------------- Mon Aug 3 08:32:06 UTC 2015 - thomas.blume@suse.com - replace iscsistart with iscsid (fate#319024) Add 0180-replace-iscsistart-with-systemd-service-files.patch ------------------------------------------------------------------- Tue Jul 21 13:01:35 UTC 2015 - trenn@suse.de - dasd_rules need collect binary to be installed into initrd bnc#938867 Add s390_dasd_install_collect.patch ------------------------------------------------------------------- Tue Jun 16 15:42:42 UTC 2015 - trenn@suse.de - Fix installing of keyctl (bnc#934736) * Add 0200-fix_nfs_with_ip_instead_of_hostname.patch - Fix nfs if IPv4 address is used in /etc/fstab to nfs mount rootfs * Add 0201-modsign_fix_keyctl_install.patch ------------------------------------------------------------------- Mon May 11 16:24:33 UTC 2015 - trenn@suse.de - Fix badly merged patch: 0176-Parse-rootflags-correctly.patch bnc#930175 ------------------------------------------------------------------- Wed Apr 8 09:09:44 CEST 2015 - hare@suse.de - Restore handling of '-c' (bsc#886839) - 90qemu: add virtio_rng kernel module (bsc#918238) ------------------------------------------------------------------- Wed Mar 18 13:56:11 CET 2015 - hare@suse.de - Parse rootflags correctly (bsc#912734) * Add 0176-Parse-rootflags-correctly.patch - 90multipath: start multipathd after udev (bsc#903001) * Add 0177-90multipath-start-multipathd-after-udev.patch ------------------------------------------------------------------- Wed Feb 11 10:59:10 CET 2015 - hare@suse.de - Drop obsolete patch: * Remove 0170-log-dracut-command-line-during-boot-process.patch - Enabled Warning for failed kernel modules per default (bnc#886839) * Modify 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch ------------------------------------------------------------------- Fri Feb 6 13:29:22 CET 2015 - hare@suse.de - Reformat patches: * 0165-Order-root-fsck-after-pre-mount.patch * 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch - Rename patches: * Remove fips-enable-aesni-intel.patch * Add 0174-fips-enable-aesni-interl.patch * Remove dracut-fix-bad-array-subscript.patch * Add 0175-dracut-Fix-bad-array-subscript-messages.patch - 98systemd/rootfs-generator: Use builtins instead of 'grep' (bnc#897252) * Add 0167-98systemd-rootfs-generator-Use-builtins-instead-of-g.patch - Enabled Warning for failed kernel modules per default * Add 0169-Enabled-Warning-for-failed-kernel-modules-per-defaul.patch - log dracut command line during boot process * Add 0170-log-dracut-command-line-during-boot-process.patch - Follow symbolic links for kernel arguments (bnc#902375) * Add 0173-Follow-symbolic-links-for-kernel-arguments-bnc-90237.patch ------------------------------------------------------------------- Thu Feb 5 07:58:39 UTC 2015 - meissner@suse.com - add hooks for regenerating the initrd after updating this package, both mainpackage and -fips subpackage. bsc#916348 - fips-enable-aesni-intel.patch: put aesni-intel.ko into the initrd for FIPS usage. bsc#914126 - dracut-fix-bad-array-subscript.patch: fixed "bad array subscript" messages when adding kernel modules using "/etc/dracut.conf". bsc#911660 ------------------------------------------------------------------- Wed Dec 3 17:05:53 UTC 2014 - trenn@suse.de - Order of patches broken, because not all mainline/factory patches are relevant for sle12 - Fix console font for foreign languages (bnc#904533) * Add 0163-Install-etc-sysconfig-console-to-see-specific-fonts.patch * Add 0172-10i18n-module-setup.sh-For-FONT_MAP-also-check-wheth.patch - Fix SUSE specific initrd-<kernel_ver> vs mainline initramfs-<kernel_ver>.img * Add 0164-Fix-initramfs-ver.img-vs-initrd-ver-in-dracut-initra.patch - Do fsck (bnc#906592) * Add 0165-Order-root-fsck-after-pre-mount.patch - Also add ifname=<NIC>:<MAC> boot parameter to always identify correct NIC (bnc#900831) * Add 0166-nfs-Add-ifname-dev-mac-to-boot-parameters.patch - Typo fix (bnc#901322) * Add 0168-convertrunfs-Fix-typo.patch - also add the cmac.ko cryptographic module to the modules (bnc#905296) * Add 0171-also-add-the-cmac.ko-cryptographic-module-to-the-mod.patch - Fix install-kernel: - Call depmod (bnc#874621) - add .config (bnc#897901) ------------------------------------------------------------------- Thu Nov 20 12:42:54 UTC 2014 - mmarek@suse.cz - purge-kernels: Also clean up kgraft-patch packages (bnc#905869) ------------------------------------------------------------------- Wed Sep 24 16:21:11 UTC 2014 - trenn@suse.de - Add ip= and root=nfs.. to dracut internal cmdline to make nfsroot working (bnc#896464) * Add 0160-nfs-Add-ip-.-and-root-nfs.-parameters-to-internal-dr.patch - Fix error message in case there is no internal dracut cmdline added Simple fix * Add 0161-Fix-error-message-when-there-are-no-internal-kernel-.patch - Request DHCP lease instead of getting/applying the offer No bug number, but Pawel rated this high prio. This should hit SLE12 still. * Add 0162-network-Request-DHCP-lease-instead-of-getting-applyi.patch ------------------------------------------------------------------- Mon Sep 22 13:33:11 UTC 2014 - trenn@suse.de - Try to load xennet driver in network module (if loaded). bnc#896464, bnc#896259 * Add 0159-network-Try-to-load-xennet.patch ------------------------------------------------------------------- Thu Sep 11 13:36:03 UTC 2014 - trenn@suse.de - dracut.usage.asc: Remove distro specific help from manpage (bnc#895363) *Add 0156-dracut.usage.asc-Remove-distro-specific-help-from-ma.patch - Add /boot/zipl to host devs if it is a mount point (bnc#892187) *Add 0157-Add-boot-zipl-to-host-devs-if-it-is-a-mount-point.patch - Add SUSE kernel module dependencies (in /etc/modprobe.d/*) (bnc#895331) *Add 0158-Add-SUSE-kernel-module-dependencies-in-etc-modprobe..patch ------------------------------------------------------------------- Thu Sep 4 12:59:27 UTC 2014 - trenn@suse.de - Network module may take quite a lot of initrd space. Do not add it unconditionally (bnc#892851) * Add 0153-Only-add-network-module-on-request-and-on-dependenci.patch - S390x can do s2disk, allow resume module there (bnc#889795) * Add 0154-resume-Also-allow-this-module-on-S390-again-s2disk-c.patch - Harden iscsi parameter checking. No bug report, but this problem was found during multipath testing and happens with 2 or more iscsi devices. * Add 0155-iscsi-iscsi.initiator-and-others-can-and-must-only-s.patch ------------------------------------------------------------------- Fri Aug 29 14:27:49 UTC 2014 - trenn@suse.de - Do not blindly try to touch the logfile (bnc#893219) * Add 0146-dracut.sh-corrected-logfile-check.patch - Only fix UUID= fstab parsing * Add 0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch - Also fix other parsing syntax in fstab like LABEL= * Add 0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch - Fix up some bugs from previous commit * Add 0149-dracut.sh-Fix-fstab-parsing-again.patch - bnc#893615 * Add 0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch - pixz does need too much memory, go back to xz in a conservative way (bnc#893981) * Add 0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch - Add some default tools to initrd when debug module is included and already provided an commented example line how to easily enable it. No functional change by default. * Add 0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch ------------------------------------------------------------------- Thu Aug 21 12:38:02 UTC 2014 - trenn@suse.de - dracut.sh: check for logfile (--logfile option) and create it if necessary Add 0139-dracut.sh-check-for-logfile-logfile-option-and-creat.patch - Avoid duplicate names in host_devs Add 0140-dracut.sh-Avoid-duplicate-devices-in-host_devs.patch - iscsi: Avoid bad ip route call on empty address Add 0141-iscsi-Avoid-bad-ip-route-call-on-empty-address.patch - 40network: Don't report error for .../ifroute-* during module setup Add 0142-40network-Don-t-report-error-for-etc-sysconfig-netwo.patch - iscsi: Fix up ipv6 in brackets , iterate over all needed iscsi mounts Add 0143-iscsi-Fix-up-ipv6-in-brackets-iterate-over-all-possi.patch - 90crypt: Fixed crypttab_contains() to also work with device in /etc/crypttab Add 0144-90crypt-Fixed-crypttab_contains-to-also-work-with-de.patch - 40network: handle 'ip=ifname:static' correctly (bnc#892801) Add 0145-40network-handle-ip-ifname-static-correctly.patch ------------------------------------------------------------------- Thu Aug 14 15:07:16 UTC 2014 - trenn@suse.de - Allow multiple configurations per network interface (bnc#887906) Add 0133-Allow-multiple-configurations-per-network-interface-.patch - Remove bootdev warning (bnc#881112) Add 0134-Remove-bootdev-warning-bnc-881112.patch - check for existance of 69-dm-lvm-metad.rules in modules_setup.sh, lvm module (bnc#891791) Add 0135-lvm-Fix-12819a579900b9691e2-check-for-existance-of-6.patch - Moved persistent network rule revert to another file (was not in github): Delete: 0133-Remove-70-persistent-net.rules.patch Add: 0136-Revert-95udev-rules-add-persistent-network-rule.patch - dracut-use-fipscheck-openssl.patch: Switch from Mozilla NSS sha256hmac checking to fipscheck as recommended Add: 0137-Switch-from-Mozilla-NSS-sha256hmac-checking-to-fipsc.patch - warpclock: Do not use warpclock module on S390(x), hwclock does not exist there (bnc#884513) Add 0138-warpclock-Do-not-use-warpclock-module-on-S390-x-hwcl.patch ------------------------------------------------------------------- Tue Aug 5 15:08:57 UTC 2014 - trenn@suse.de - 99base: Increase initqueue timeout in non systemd case (bnc#887402) * Add: 0127-99base-Increase-initqueue-timeout-in-non-systemd-cas.patch - 90lvm: Install dm-snapshot module (bnc#888530) * Add: 0128-90lvm-Install-dm-snapshot-module.patch - Revert commit 6ecab258710d158a7a6 and only do not wait for swap via parameter (bnc#882812) * Add: 0129-Revert-commit-6ecab258710d158a7a6-and-only-do-not-wa.patch - nfs: Always add all kernel modules for kdump (bnc#887906) * Add: 0130-nfs-Always-add-all-kernel-modules-for-kdump.patch - 40network: handle prefixed IP addresses correctly (bnc#880108) * Add: 0131-40network-handle-prefixed-IP-addresses-correctly.patch - 40network: fixup static network configuration * Add: 0132-40network-fixup-static-network-configuration.patch - Remove 70-persistent-net.rules * Add: 0133-Remove-70-persistent-net.rules.patch ------------------------------------------------------------------- Mon Jul 21 10:47:50 CEST 2014 - hare@suse.de - mkinitrd-suse.sh: Bail out with exit 1 if initrd cannot be generated (bnc#886630) * Add: 0120-mkinitrd-suse.sh-Bail-out-with-exit-1-if-initrd-cann.patch - Adjust initramfs-$kernel.img to SUSE default: initrd-$kernel (bnc#882306) * Add: 0121-Adjust-initramfs-kernel.img-to-SUSE-default-initrd-k.patch - btrfs: btrfs-dump-super and btrfs-select-super do not exist (bnc#886883) * Add: 0122-btrfs-btrfs-dump-super-and-btrfs-select-super-do-not.patch - 95zfcp_rules: fix typo in module_setup (bnc#887582) * Add: 0123-95zfcp_rules-fix-typo-in-module_setup.patch - 40network: Update iBFT scanning code to handle IPv6 (bnc#887542) * Add: 0124-40network-Update-iBFT-scanning-code-to-handle-IPv6.patch - 40network: separate 'mask' and 'prefix' (bnc#887542) * Add: 0125-40network-separate-mask-and-prefix.patch - 01fips: Add drbg module to force loaded modules (bnc#875855) * Add: 0126-01fips-Add-drbg-module-to-force-loaded-modules.patch ------------------------------------------------------------------- Mon Jul 14 16:20:46 UTC 2014 - trenn@suse.de - Fixup executable bits of newly patched files manually in spec file bnc#887117 ------------------------------------------------------------------- Mon Jul 14 10:35:51 CEST 2014 - hare@suse.de - Mark all scripts as executable (bnc#887010) * Remove: 0116-81cio_ignore-Mark-scripts-as-executable * Add: 0116-Mark-scripts-as-executable.patch - 95dasd_rules: Enable device before checking type * Add: 0117-95dasd_rules-Enable-the-device-before-checking-devic.patch - 95zfcp_rules: Enable device before checking type * Add: 0118-95zfcp_rules-Enable-the-device-before-checking-devic.patch - Reset IFS variable * Add: 0119-Reset-IFS-variable.patch ------------------------------------------------------------------- Sat Jul 12 15:01:04 CEST 2014 - hare@suse.de - Handle module alias properly (bnc#886839) * Add: 0115-Handle-module-alias-properly.patch - 81cio_ignore: Mark scripts as executable (bnc#887010) * Add: 0116-81cio_ignore-Mark-scripts-as-executable.patch ------------------------------------------------------------------- Fri Jul 11 13:01:08 CEST 2014 - hare@suse.de - 91zipl: Translate 'ext2' into 'ext4' module * Add: 0114-91zipl-Translate-ext2-3-into-ext4.patch ------------------------------------------------------------------- Thu Jul 10 13:30:51 CEST 2014 - hare@suse.de - Enable converting of directory /var/run /var/lock to symlinks (bnc#877680) * Add: 0106-dracut-Enable-converting-of-directory-var-run-var-lo.patch - Fixup typo 'firmare' instead of 'firmware' * Add: 0107-Fixup-typo-firmare-instead-of-firmware.patch - 91zipl: Store commandline correctly * Add: 0108-91zipl-Store-commandline-correctly.patch - 95dasd_rules: Store all devices in commandline * 0109-95dasd_rules-Store-all-devices-in-commandline.patch - 95zfcp_rules: Store all devices in commandline * Add: 0110-95zfcp_rules-Store-all-devices-in-commandline.patch - 90mdraid: Remove line for 'offroot' detection * Add: 0111-90mdraid-Remove-line-for-offroot-detection.patch - 99base: warn on invalid command for initqueue * Add: 0112-99base-warn-on-invalid-command-for-initqueue.patch - 91zipl: Install script as executable * Add: 0113-91zipl-Install-script-as-executable.patch ------------------------------------------------------------------- Tue Jul 8 13:21:14 CEST 2014 - hare@suse.de - Print stored dracut commandline during initramfs build * Add: 0101-Print-stored-dracut-commandline-during-initramfs-bui.patch - Align dev_unit_name() with systemd's function * Add: 0102-Align-dev_unit_name-with-systemd-s-function.patch - Fixup missing separators in rootfs-block cmdline * Add: 0103-Fixup-missing-separators-in-rootfs-block-cmdline.patch - Generate fallback mount unit for root filesystem (bnc#855258) * Add: 0104-Generate-fallback-mount-unit-for-root-filesystem.patch - 95iscsi: parse output from iscsiadm correctly (bnc#886199) * Add: 0105-95iscsi-parse-output-from-iscsiadm-correctly.patch ------------------------------------------------------------------- Thu Jul 3 18:16:11 CEST 2014 - dsterba@suse.cz - 90btrfs: Install rescue utilities to initrd * Add: 0100-btrfs-add-initrd-rescue-utilities.patch ------------------------------------------------------------------- Thu Jul 3 15:41:16 CEST 2014 - hare@suse.de - 40network: create /var/lib/wicked in ifup.sh (bnc#885141) * Add: 0089-40network-create-var-lib-wicked-in-ifup.sh.patch - dracut: caps: Remove whole caps module * Add: 0090-dracut-caps-Remove-whole-caps-module.patch - dracut: biosdevname: Only install if present * Add: 0091-dracut-biosdevname-In-SUSE-biosdevname-package-is-in.patch - dracut: nbd: Only complain of missing binary in hostonly mode if rootfs is on nbd * Add: 0092-dracut-nbd-Only-complain-of-missing-binary-in-hoston.patch - 95iscsi: generate commandline for software iscsi (bnc#880108) * Add: 0093-95iscsi-generate-commandline-for-software-iscsi.patch - Implement shortcut 'ip=<ifname>:static' for static configuration * Add: 0094-Implement-shortcut-ip-ifname-static-for-static-confi.patch - 95iscsi: use static configuration for software iscsi (bnc#884768) * Add: 0095-95iscsi-use-static-configuration-for-software-iscsi.patch - dracut: Fix error: local: can only be used in a function * Add: 0096-dracut-Fix-error-local-can-only-be-used-in-a-functio.patch - Implement 'rd.timeout' to modify the device timeout (bnc#878770) * Add: 0097-Implement-rd.timeout-to-modify-the-device-timeout.patch - Do not call 'lvm' for non-LVM device-mapper devices * Add: 0098-Do-not-call-lvm-for-non-LVM-device-mapper-devices.patch - 90multipath: Load device_handler modules early during boot (bnc#871617) * Add: 0099-90multipath-Load-device_handler-modules-early-during.patch ------------------------------------------------------------------- Fri Jun 27 15:23:37 CEST 2014 - hare@suse.de - 91zipl: Add new module for s390x configuration changes (bnc#884743) * Add: 0088-91zipl-Add-new-module-to-update-s390x-configuration.patch ------------------------------------------------------------------- Thu Jun 26 16:41:58 CEST 2014 - hare@suse.de - 95dasd_rules: Fixup rd.dasd parsing * Add: 0079-95dasd_rules-fixup-rd.dasd-parsing.patch - 95dasd_rules: Print out rd.dasd command-line * Add: 0080-95dasd_rules-print-out-rd.dasd-commandline.patch - 95dasd_mod: do not set module parameter * Add: 0081-95dasd_mod-do-not-set-module-parameters-if-dasd_cio_.patch - 00warpclock: Check for /sbin/hwclock (bnc#884513) * Add: 0082-00warpclock-check-for-sbin-hwclock.patch - 95zfcp_rules: Fixup rd.zfcp parsing * Add: 0083-95zfcp_rules-Fixup-rd.zfcp-parsing.patch - 95rootfs_block: terminate commandline parameter * Add: 0084-95rootfs-block-Correctly-terminate-commandline-param.patch - 95zfcp_rules: Print out rd.zfcp command-line * Add: 0085-95zfcp_rules-print-out-rd.zfcp-commandline-parameter.patch - 95zfcp_rules: Auto-generate ipl device rule * Add: 0086-95zfcp_rules-Auto-generate-udev-rule-for-ipl-device.patch - 95dasd_rules: Auto-generate ipl device rule * Add: 0087-95dasd_rules-Auto-generate-udev-rule-for-ipl-device.patch ------------------------------------------------------------------- Mon Jun 23 14:13:53 CEST 2014 - hare@suse.de - More empty commandline fixes * Add: 0074-More-empty-cmdline-fixes.patch - 95dasd_rules: enable parsing of rd.dasd= commandline parameter * Add: 0075-95dasd_rules-enable-parsing-of-rd.dasd-commandline-p.patch - Correctly set cio_ignore for dynamic s390 rules * Add: 0076-Correctly-set-cio_ignore-for-dynamic-s390-rules.patch - 90multipath: add missing 11-dm-mpath.rules file (bnc#883149) * Add: 0077-90multipath-add-missing-11-dm-mpath.rules-file.patch - Restore original IFS value (bnc#883770) * Add: 0078-Restore-original-IFS-value.patch ------------------------------------------------------------------- Wed Jun 18 02:00:28 CEST 2014 - tbehrens@suse.com - Fix non-export of journal dev boot options * Add: 0071-Fix-non-export-of-journal-dev-boot-options.patch - Also export root= boot param for hostonly-cmdline * Add: 0072-Also-export-root-boot-param-for-hostonly-cmdline-cas.patch - Don't create lots of empty cmdline files * Add: 0073-Don-t-create-lots-of-empty-cmdline-files-for-hostonl.patch ------------------------------------------------------------------- Tue Jun 17 16:58:03 CEST 2014 - hare@suse.de - 81cio_ignore: rewrite module to not mount any filesystem (bnc#882685) * Add: 0070-81cio_ignore-rewrite-module.patch ------------------------------------------------------------------- Tue Jun 17 11:14:07 CEST 2014 - hare@suse.de - 81cio_ignore: ignore module if cio_ignore is not specified (bnc#882685) * Add: 0069-81cio_ignore-skip-module-if-cio_ignore-is-not-active.patch ------------------------------------------------------------------- Mon Jun 16 14:17:43 CEST 2014 - hare@suse.de - 40network: always start netroot in ifup.sh (bnc#881235) * Add: 0066-40network-always-start-netroot-in-ifup.sh.patch - 95fcoe: check() always returns 255 * Add: 0067-95fcoe-check-always-returns-255.patch - 95fcoe-uefi: Test for EFI firmware (bnc#882412) * Add: 0068-95fcoe-uefi-Test-for-EFI-firmware.patch ------------------------------------------------------------------- Fri Jun 13 12:52:27 CEST 2014 - hare@suse.de - Rename patches to match git repository: * Old: more-fips-adjustments.patch * New: 0057-01fips-Include-some-more-hmacs.patch * Old: dracut-check-supported.patch * New: 0058-dracut-add-warning-when-including-unsupported-module.patch - Add 99suse module to git repository: * Remove: parse-suse-initrd.sh * Remove: module-setup-initrd.sh * Add: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch - Add write-ifcfg-suse.sh to git repository: * Remove: write-ifcfg-suse.sh * Add: 0060-45ifcfg-Add-SUSE-specific-write-ifcfg-file.patch - Fixup error messages in write-ifcfg-suse.sh (bnc#881286) * Add: 0061-45ifcfg-Fixup-error-message-in-write-ifcfg-suse.patch - Add missing 'libgcc_s.so' library (bnc#881692): * Add: 0062-95iscsi-Install-libgcc_s-library.patch * Add: 0063-90multipath-Install-libgcc_s-library.patch - Install missing scsi_dh_alua module (bnc#871617) * Add: 0064-90kernel-modules-install-scsi_dh_alua.patch - 95iscsi: fixup bnx2i offload booting (bnc#855747) * Add: 0065-95iscsi-Fixup-bnx2i-offload-booting.patch ------------------------------------------------------------------- Wed Jun 11 18:17:34 UTC 2014 - jeffm@suse.com - Add option to warn if unsupported modules are added to the initramfs - Enable this option for 'make install' when a kernel with CONFIG_SUSE_KERNEL_SUPPORTED enabled is used. (bnc#882332) - Add dracut-check-supported.patch ------------------------------------------------------------------- Wed Jun 11 12:49:44 UTC 2014 - meissner@suse.com - include the several hmacs needed for FIPS integrity checking of cryptsetup, libgcrypt, libfipscheck1. Also add the openssl HMACs too as someone else seems to use those too. Add: more-fips-adjustments.patch ------------------------------------------------------------------- Wed Jun 4 14:58:55 CEST 2014 - hare@suse.de - Rediff patches to match git repository - 95fcoe: Check for FCoE devices prior to binaries * Modify 0055-95fcoe-Only-install-fcoe-module-if-required.patch - 99base: Install chown instead of chgrp * Modify 0052-99base-Add-chown-binary.patch - 95iscsi: do not try to detect iSCSI firmware during booting; should be handled via commandline parameter * Modify 0030-95iscsi-Autodetect-iSCSI-firmware.patch - Rename patch: * old: 0051-mkinitrd-suse-add-update-booloader-message.patch new: 0051-mkinitrd-suse-add-update-bootloader-message.patch ------------------------------------------------------------------- Wed Jun 4 14:30:07 CEST 2014 - hare@suse.de - Rename patches to match git repository: * old: 0013-Correct-paths-for-openSUSE.patch new: 0011-Correct-paths-for-openSUSE.patch * old: 0014-Check-for-plymouth-lib-directories.patch new: 0012-Check-for-plymouth-lib-directories.patch * old: dracut_do_not_update_booloader_if_no_kernel_is_found.patch new: 0013-mkinitrd-suse-do-not-update-bootloader-if-no-kernel-.patch * old: suse_grub_manpage.patch new: 0014-Update-dracut-manpage-for-GRUB-Legacy-and-GRUB2.patch * old: replace_dhclient_with_wickedd_dhcp_supplicants.patch new: 0015-40network-replace-dhclient-with-wickedd-dhcp-supplic.patch * old: 0015-add-new-s390x-specific-rule-files.patch new: 0016-Add-new-s390x-specific-rule-files.patch * old: change_write_ifcfg_to_suse.patch new: 0017-45ifcfg-use-distro-specific-scripts.patch * old: dracut-fix-whitespace-add-drivers_call.patch new: 0018-mkinitrd-suse-Fix-whitespaces-when-adding-drivers.patch * old: wait_for_network_race_condition_fix.patch new: 0019-40network-Fix-race-condition-when-wait-for-networks.patch * old: dracut-warpclock_module.patch new: 0020-00warpclock-Set-correct-timezone.patch * old: s390-dcssblk.patch new: 0021-95dcssblk-Add-new-module-for-DCSS-block-devices.patch * old: dracut-install-persistent-rule.patch new: 0022-95udev-rules-add-persistent-network-rule.patch * old: dracut-really-always-add-autofs4.patch new: 0023-systemd-always-tries-to-load-autofs4.patch * old: mdraid-setup.patch new: 0024-Fixup-mdraid-setup.patch * old: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch new: 0025-95udev-rules-Add-59-scsi-sg_utils.rules.patch * old: 0016-90multipath-add-67-kpartx-compat.rules.patch new: 0026-90multipath-add-67-kpartx-compat.rules.patch * old: 0017-90multipath-install-dracut-specific-service-file.patch new: 0027-90multipath-install-dracut-specific-service-file.patch * old: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch new: 0028-95udev-rules-Include-correct-sg3_utils-rules.patch * old: 0021-90multipath-install-correct-multipath-rules.patch new: 0029-90multipath-install-correct-multipath-rules.patch * old: add_dracuts_network_params_for_iscsi.patch new: 0030-95iscsi-Autodetect-iSCSI-firmware.patch * old: 0022-90multipath-Fixup-service-file-for-booting.patch new: 0031-90multipath-Fixup-service-file-for-booting.patch * old: 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch new: 0032-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch * old: 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch new: 0033-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch * old: 0025-dracut_continue_adding_modules_also_on_error.patch new: 0034-dracut-Do-not-stop-installing-drivers-if-one-fails.patch * old: 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch new: 0035-Introduce-force-drivers-parameter-and-force_drivers-.patch * old: 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch new: 0036-95fcoe-Store-current-configuration-in-dracut-cmdline.patch * old: 0028-95fcoe-update-fcoe-interface-check.patch new: 0037-95fcoe-update-fcoe-interface-check.patch * old: 0029-95fcoe-start-lldpad-separately.patch new: 0038-95fcoe-start-lldpad-separately.patch * old: 0030-dracut-mkinitd_cleanup_force_host_only_var.patch new: 0039-Remove-force-parameter-from-mkinitrd.patch * old: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch new: 0040-95fcoe-skip-VLAN-devices-in-fcoe-up.patch * old: 0033-dracut_hostonly_hostonly_cmdline_default.patch new: 0041-mkinitd-suse-remove-hostonly-and-hostonly-cmdline.patch * old: 0034-suse.conf.example_extend.patch new: 0042-Enhance-suse.conf-example-with-SUSE-specific-setting.patch * old: 0035-always_add_network.patch new: 0043-40network-always-add-network-module.patch * old: 0036-add_extra_debug_binaries.patch new: 0044-Add-find-to-debug-binaries.patch * old: 0037-fix_s390_network_modules_install.patch new: 0045-40network-add-missing-_arch-variable-declaration.patch * old: 0038-remove_waiting_for_swap_dev.patch new: 0046-dracut-Do-not-wait-for-swap-device.patch * old: 0039-s390_no_resume_module.patch new: 0047-95resume-skip-module-for-s390-x.patch * old: 0041-only_enable_network_if_explicitly_requested.patch new: 0048-40network-Only-enable-network-interfaces-if-explicit.patch * old: 0042-ibft_autoconfig_param.patch new: 0049-95iscsi-Use-ip-ibft-for-ibft-autoconfiguration.patch * old: 0043-fcoe_strip_quotes.patch new: 0050-95iscsi-strip-one-set-of-quotes-when-calling-initque.patch * old: 0044-Add_update_bootloader_msg.patch new: 0051-mkinitrd-suse-add-update-booloader-message.patch * old: 0045-add-chown_binary.patch new: 0052-99base-Add-chown-binary.patch * old: dracut-fips-module-loading-fixes.patch new: 0053-01fips-fixup-loading-issues.patch * old: 0046-ibft_update_cmdline_printing.patch new: 0054-95iscsi-update-commandline-printing.patch * old: 0047-only_install_fcoe_if_required.patch new: 0055-95fcoe-Only-install-fcoe-module-if-required.patch * old: 0048-cio_ignore.patch new: 0056-81cio_ignore-handle-cio_ignore-commandline.patch ------------------------------------------------------------------- Mon Jun 2 18:29:33 UTC 2014 - trenn@suse.de - Mount zipl device on S390 (bnc#874902) Add 0048-cio_ignore.patch ------------------------------------------------------------------- Mon Jun 2 11:42:59 UTC 2014 - trenn@suse.de - Only install fcoe if required and suppress require-binaries output Add 0047-only_install_fcoe_if_required.patch - ibft: Correctly show ibft cmdline via print-cmdline Add 0046-ibft_update_cmdline_printing.patch ------------------------------------------------------------------- Mon Jun 2 09:07:27 UTC 2014 - meissner@suse.com - dracut-fips-module-loading-fixes.patch: bnc#875855 - adjust FIPS module list - on architecture specific modules, failing loading is not critical - ship 98selinux, for people that want to use SELinux. ------------------------------------------------------------------- Wed May 28 15:54:26 UTC 2014 - trenn@suse.de - Update to latest git HEAD: commit 0fa5dbedc5b222435f51f7460a81232ee120c4e1 Tue May 20 13:23 Modified dracut_v37_to_HEAD.patch Modified mdraid-setup.patch Modified dracut-install-persistent-rule.patch Removed 0032-98systemd-fixup-rootfs-generator-installation-path.patch - Add /etc/dracut.d.conf/01-dist modifications to file instead of writing to it via rpm build section Add 0033-dracut_hostonly_hostonly_cmdline_default.patch Add 0034-suse.conf.example_extend.patch - Cleanup mkinitrd-suse.sh: * Remove hostonly and hostonly-cmdline -> this is done via 01-dist config file now - Always add network module based on modules_setup.sh check() function and not via 01-dist config file Add 0035-always_add_network.patch - Add find to debug binaries - Useful and harmless Add 0036-add_extra_debug_binaries.patch - Fix adding of network modules for s390 (bnc#879302) Add 0037-fix_s390_network_modules_install.patch - Omit resume module on s390(x) - There is no suspend on s390 Add 0039-s390_no_resume_module.patch - Do not wait for swap - This causes trouble with Rudi's autobuild images: Add 0038-remove_waiting_for_swap_dev.patch - Fcoe and ibft fixes (bnc#879038): Add 0041-only_enable_network_if_explicitly_requested.patch Add 0042-ibft_autoconfig_param.patch Add 0043-fcoe_strip_quotes.patch - Print message when starting to update bootloader Add 0044-Add_update_bootloader_msg.patch - ToDo: Pass hostonly variable earlier so that is always avail in check() function. Still already add: Add 0040-fcoe_fix_check_function.patch - Add chown to initrd (bnc#879767) Add 0045-add-chown_binary.patch - Use parallel pixz instead of xz binary to compress the initrd ------------------------------------------------------------------- Tue May 20 08:59:51 UTC 2014 - trenn@suse.de - From Hannes Reinecke <hare@suse.com>: fixup rootfs-generator installation path (bnc#878714) Add 0032-98systemd-fixup-rootfs-generator-installation-path.patch ------------------------------------------------------------------- Mon May 19 16:05:49 UTC 2014 - trenn@suse.de - Corrected previous patch Modified: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch ------------------------------------------------------------------- Mon May 19 11:11:42 UTC 2014 - trenn@suse.de - From Hannes Reinecke <hare@suse.com>: skip VLAN devices in fcoe-up (bnc#878583) Add: 0031-95fcoe-skip-VLAN-devices-in-fcoe-up.patch ------------------------------------------------------------------- Thu May 15 14:07:44 UTC 2014 - trenn@suse.de - By Hannes Reinecke <hare@suse.com>: - Fixup FCoE booting (bnc#877288) * Add 0027-95fcoe-Store-current-configuration-in-dracut-cmdline.patch * Add 0028-95fcoe-update-fcoe-interface-check.patch * Add 0029-95fcoe-start-lldpad-separately.patch - Cleanup host_only variable using in mkinitrd - Remove --force parameter from mkinitrd, we always force anyway * Add 0030-dracut-mkinitd_cleanup_force_host_only_var.patch - Remove acpi parameter from mkinitrd, this is done differently nowadays - Adjust manpage accordingly ------------------------------------------------------------------- Wed May 14 12:42:37 UTC 2014 - meissner@suse.com - also do the service magic in %post/%postun, otherwise purge-kernels will not get enabled. ------------------------------------------------------------------- Wed May 7 15:25:37 UTC 2014 - trenn@suse.de - Do not inst binaries explicitly into /bin or /usr/bin, it is already taken care of internally for that: Delete 0006-Install-bin-mount.patch Modify 0013-Correct-paths-for-openSUSE.patch - Do not stop trying to load drivers (via add-drivers or filesystems) if one fails Add 0025-dracut_continue_adding_modules_also_on_error.patch - Introduce force-drivers. mkinitrd should use this one instead of add-drivers later, if accepted mainline Add 0026-force_to_add_and_load_kernel_modules_other_than_via_boot_param.patch ------------------------------------------------------------------- Mon May 5 08:55:37 CEST 2014 - hare@suse.de - Update add_dracuts_network_params_for_iscsi.patch to detect be2iscsi firmware devices - Remove obsolete patch fix-iscsi-firmware.sh - Fixup iscsi firmware booting with be2iscsi (bnc#873448): Added 0024-95iscsi-Set-correct-iscsi_started-value-for-iSCSI-fi.patch - Renamed mkinird_differ_host_and_cmdline_only_properly.patch to 0023-mkinitrd-suse.sh-Use-hostonly-and-hostonly-cmdline-c.patch ------------------------------------------------------------------- Wed Apr 30 15:18:45 UTC 2014 - trenn@suse.de - Update to lateste git HEAD 48b7ab1b35adf1f3f09f883ef14ea0a3fba1e468 Added: dracut_v37_to_HEAD.patch Modified: 0013-Correct-paths-for-openSUSE.patch Modified: mdraid-setup.patch Modified: replace_dhclient_with_wickedd_dhcp_supplicants.patch Deleted: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch Deleted: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch - Fix lvm and other possible not working thing due to new parameter: hostonly-cmdline which has to be active by default bnc#874000 bnc#874905 bnc#874363 Added: mkinird_differ_host_and_cmdline_only_properly.patch - Make write-ifcfg-suse.sh more update robust Avoid rebasing of diff with every update touching this file by adding write-ifcfg-suse.sh as source file and copy/link in .spec file. Modified: change_write_ifcfg_to_suse.patch ------------------------------------------------------------------- Tue Apr 29 15:43:28 UTC 2014 - meissner@suse.com - consolidate -fips-aesni into -fips again. The problem due to it was split off upstream was solved in the kernel. ------------------------------------------------------------------- Fri Apr 25 13:48:45 UTC 2014 - meissner@suse.com - Create new -fips and -fips-aesni subpackage for kernel integrity checking. bnc#856310 FATE#316930 - add spaces around "network" in 01-dist.conf, as the addmodules list is concatenated and you never know which config is before or after and what it does. ------------------------------------------------------------------- Wed Apr 16 09:56:31 CEST 2014 - hare@suse.de - Enable multipath correctly during booting (bnc#873686) Add: 0022-90multipath-Fixup-service-file-for-booting.patch ------------------------------------------------------------------- Mon Apr 14 14:19:49 UTC 2014 - pwieczorkiewicz@suse.com - fix-iscsi-firmware.patch: Fix according to dracut-037 updates (iscsistarted-iscsi:). ------------------------------------------------------------------- Mon Apr 14 09:00:26 UTC 2014 - pwieczorkiewicz@suse.com - add_dracuts_network_params_for_iscsi.patch: Add missing dracut's cmdline parameters to make network mandatory and boot using iBFT when present. Without them iBFT booting does not work. ------------------------------------------------------------------- Fri Apr 11 13:07:05 CEST 2014 - hare@suse.de - Install correct rule files for multipath support (bnc#873151) Add: 0020-95udev-rules-Include-correct-sg3_utils-rules.patch Add: 0021-90multipath-install-correct-multipath-rules.patch ------------------------------------------------------------------- Thu Apr 10 14:49:23 UTC 2014 - trenn@suse.de - Do not always try to add iscsi module, let its check function decide - Compress initrd with xz --check=crc32 -6 by default ------------------------------------------------------------------- Wed Apr 9 16:47:27 UTC 2014 - crrodriguez@opensuse.org - Remove the bootchart module, note that we still keep the systemd-bootchart one which provides similar functionality. ------------------------------------------------------------------- Wed Apr 9 16:42:49 UTC 2014 - crrodriguez@opensuse.org - Remove the busybox module we have all basic tools already in the initrd - _unitdir is always defined nowadays, remove the conditionals. ------------------------------------------------------------------- Wed Apr 9 14:48:12 UTC 2014 - sfalken@opensuse.org - Replaced dracut tarball with proper upstream tarball Add: dracut-037.tar.xz ------------------------------------------------------------------- Tue Apr 8 10:16:16 CEST 2014 - hare@suse.de - Update dracut to 037 * Add --hostonly_cmdline switch * Update --mount syntax * Include modules from /updates directory * Fixes for network setup * Some small fixes - Rediff patches - Include iscsiuio again (bnc#872474) Remove: remove-iscsiuio.patch - Install 59-scsi-sg_utils.rules (bnc#872478) Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch - Install 67-kpartx-compat.rules (bnc#872662) Add: 0016-90multipath-add-67-kpartx-compat.rules.patch - Install separate multipath service file (bnc#871610) Add: 0017-90multipath-install-dracut-specific-service-file.patch - Do not fsck and mount from fstab if systemd is used (bnc# Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch - Fixup initqueue for remote-fs Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch ------------------------------------------------------------------- Thu Apr 3 23:59:31 UTC 2014 - crrodriguez@opensuse.org - revert last change, ucode-intel is not mandatory and will get installed by default anyway, either via patterns or by modalias dependencies in the package itself. ------------------------------------------------------------------- Thu Apr 3 19:07:30 UTC 2014 - crrodriguez@opensuse.org - Require package ucode-intel in x86* ------------------------------------------------------------------- Tue Apr 1 06:23:28 UTC 2014 - nfbrown@suse.com - mdraid-setup.patch Make mdraid scripts work with latest mdadm. Without this, boot from DDF or IMSM array fails if one device is missing (bnc#866660) ------------------------------------------------------------------- Fri Mar 28 17:39:08 UTC 2014 - trenn@suse.de - systemd always tries to load autofs4 otherwise it reports: Failed to insert module 'autofs4' dracut already adds it, but only if loaded already. Always load autofs4 even if not already loaded (bnc#869411) Add: dracut-really-always-add-autofs4.patch ------------------------------------------------------------------- Tue Mar 25 18:18:56 UTC 2014 - trenn@suse.de - Fix installkernel script bnc#862990 ------------------------------------------------------------------- Fri Mar 14 19:49:38 UTC 2014 - rmilasan@suse.com - Add support for 70-persistent-net.rules in dracut (bnc#868375) Add: dracut-install-persistent-rule.patch ------------------------------------------------------------------- Fri Mar 14 15:09:37 UTC 2014 - trenn@suse.de - CRITICAL: Fix add-drivers passing from mkinitrd to dracut bnc#868397 ------------------------------------------------------------------- Wed Mar 12 14:50:50 UTC 2014 - trenn@suse.de - Add s390 dcssblk driver and introduce rd.dcssblk= to pass mounts that should get activated at initrd stage fate#308263 Add: s390-dcssblk.patch ------------------------------------------------------------------- Fri Mar 7 13:14:39 UTC 2014 - trenn@suse.de - bnc#830060 - Dracut is missing warpclock/hwclock Add dracut-warpclock_module.patch ------------------------------------------------------------------- Wed Mar 5 15:25:32 UTC 2014 - pwieczorkiewicz@suse.com - wait_for_network_race_condition_fix.patch: * In case of no network related params are specified, but rd.neednet=1 is set, default initqueue action is to wait until one of the network interfaces is marked as set up properly. (bnc#866771) * It also helps with initqueue's race condition when network interface shows up late. - replace_dhclient_with_wickedd_dhcp_supplicants.patch: Add a missing network setup flag. (bnc#866771) ------------------------------------------------------------------- Mon Mar 3 16:51:30 UTC 2014 - trenn@suse.de - Merge all dracut-* packages to one dracut.rpm package. Subpackages only had one or two minor files not worth splitting a package or dracut-network had important modules which should (like former main dracut package) always get installed - libcap does not exist and libcap2 or friends are not needed -> remove Requires: libcap - Reorder (sort) the files section a bit ------------------------------------------------------------------- Mon Mar 3 16:30:48 UTC 2014 - trenn@suse.de - Fix bug introduced with last commit: Bad whitespace logic when INITRD_MODULES contain more than one module. ------------------------------------------------------------------- Thu Feb 27 14:08:56 UTC 2014 - trenn@suse.de - Make sure that --add-drivers is not called with whitespace string which will lead to a "read line" user input request and things may get stuck at installation. - Add: dracut-fix-whitespace-add-drivers_call.patch - Remove s390 grub module again -> this will go into grub2 package (ask rw@suse.de for details) Delete/remove: s390_add-user-space-grub-rule.patch - Add installkernel script which installs the kernel when: make install is invoked. The script from mkinitrd has been taken over and adopted. Added source: dracut-installkernel bnc#862990 ------------------------------------------------------------------- Fri Feb 21 14:56:20 UTC 2014 - trenn@suse.de - Fix syntax error -> missing then - Correct path, it is /usr/bin/grub2-emu ------------------------------------------------------------------- Mon Feb 17 18:51:58 UTC 2014 - trenn@suse.de - autofs4 is always included since mainline git commit: 314929920f27448b45bfd systemd: ensure autofs4 and ipv6 are included - Always add network and iscsi dracut module, so that ibft, iscsi, nfsroot work as expected. ------------------------------------------------------------------- Fri Feb 14 14:02:52 UTC 2014 - pwieczorkiewicz@suse.com - change_write_ifcfg_to_suse.patch: Detect the system flavor and write the ifcfg files accordingly. ------------------------------------------------------------------- Fri Feb 14 13:10:28 UTC 2014 - trenn@suse.de Originally by Hannes Reinecke (hare@suse.de): - Install new s390x specific udev rules (bnc#856585) - Add: 0015-add-new-s390x-specific-rule-files.patch - Do not check for non-existing dasd_configure for s390x (bnc#856585) ------------------------------------------------------------------- Thu Feb 13 21:38:38 UTC 2014 - jjolly@suse.com - Added 95grub2 module for s390x ------------------------------------------------------------------- Thu Feb 13 14:10:16 UTC 2014 - pwieczorkiewicz@suse.com - remove-iscsiuio.patch: Remove iscsiuio references as this one is not present in SLE-12. ------------------------------------------------------------------- Thu Feb 13 14:10:08 UTC 2014 - pwieczorkiewicz@suse.com - fix-iscsi-firmware.patch: Fix iSCSI iBFT boot up problem introduced with mainline changes ------------------------------------------------------------------- Thu Feb 13 14:09:55 UTC 2014 - pwieczorkiewicz@suse.com - replace_dhclient_with_wickedd_dhcp_supplicants.patch: Replace dhclient with wickedd-dhcp4 and wickedd-dhcp6. Script up dhcp functionality in ifup.sh. ------------------------------------------------------------------- Thu Feb 13 06:28:01 UTC 2014 - sfalken@opensuse.org -Added bug number to previous changelog entry ------------------------------------------------------------------- Thu Feb 13 05:40:32 UTC 2014 - sfalken@opensuse.org -Updated suse_grub_manpage.patch to further correct for incorrect grub configuration paths bnc#858448 ------------------------------------------------------------------- Wed Feb 12 21:42:55 UTC 2014 - sfalken@opensuse.org -Updated suse_grub_manpage.patch for dracut-036 ------------------------------------------------------------------- Wed Feb 12 12:48:16 UTC 2014 - sfalken@opensuse.org -Added patch to fix manpage to reflect openSUSE GRUB Legacy and GRUB2 - removed patches: * dracut_git_v034_to_head.patch ------------------------------------------------------------------- Sun Feb 9 12:41:01 UTC 2014 - tchvatal@suse.com - Cleanup with spec-cleaner. ------------------------------------------------------------------- Sun Feb 9 12:38:52 UTC 2014 - tchvatal@suse.com - Version bump to 036 removing the need for patching from git. - removed patch: * dracut_git_v034_to_head.patch ------------------------------------------------------------------- Fri Jan 31 13:49:27 UTC 2014 - trenn@suse.de - Do not show usage error when no kernel was found. This may happen several times at package installation time and floods the logs. Modify dracut_do_not_update_booloader_if_no_kernel_is_found.patch ------------------------------------------------------------------- Tue Jan 14 14:10:06 UTC 2014 - trenn@suse.de - Correctly fix previous issue: Exit without calling update-bootloader (bnc#858268) Currently mkinitrd will always exit early without creating an initrd at all. Rebase: dracut_do_not_update_booloader_if_no_kernel_is_found.patch - Remove an obsolete comment from .spec file ------------------------------------------------------------------- Mon Jan 13 17:52:51 UTC 2014 - trenn@suse.de Exit without calling update-bootloader (bnc#858268): Add: dracut_do_not_update_booloader_if_no_kernel_is_found.patch Adding: Requires: systemd-sysvinit which has reboot, halt and other binaries dracut likes to add to the initrd. Cleanup and adjust to latest mainline: Dropping as these are included in the latest update_git_v034_to_head patch: Drop: 0001-95dasd-Install-kernel-modules-only-once.patch Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch Drop: 0004-95zfcp-Make-installation-optional.patch Drop: 0005-95znet-Make-installation-optional.patch Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch Drop: 0008-Add-DASD-configuration-for-SuSE.patch Drop: 0009-Add-zfcp-scripts-for-SUSE.patch Drop: 0010-Make-logfile-configurable.patch Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch Drop: 0015-Fixup-script-permissions.patch Drop: 0016-Remove-shebang-from-shell-completion-files.patch Drop: dracut-git-update.patch Rebase: 0013-Correct-paths-for-openSUSE.patch This is a rename of dracut-git-update.patch to: Add: dracut_git_v034_to_head.patch ------------------------------------------------------------------- Fri Dec 20 14:17:54 UTC 2013 - trenn@suse.de - Cleanup: Remove %define replace_mkinitrd 1 and related conditionals in .spec file -> One either has to install dracut or mkinitrd and it will stay like that. ------------------------------------------------------------------- Wed Dec 18 16:20:04 UTC 2013 - trenn@suse.de - Add purge kernel service/feature which before was part of mkinitrd bnc#854348 ------------------------------------------------------------------- Thu Nov 28 09:56:36 CET 2013 - hare@suse.de - Update with patches from git repository: * kernel-modules: add ohci-pci to the list of forced module installs * Run 'xz' and 'lzma' with multiple threads * systemd: do not exit the initqueue, if systemd asks a password * iscsi,nbd: do not fail in hostonly mode * dracut-functions.sh: Avoid loading unnecessary 32-bit libraries for 64-bit initrds * fips: also install /etc/system-fips in the initramfs * dracut.modules.7.asc: removed empty section * dracut.sh: fixed PATH shortener * dracut.spec: move /sbin/dracut to /usr/sbin/dracut * iscsi/nbd: do not try to mount the whole disk, if root= is missing * fips: include crct10dif_generic * Handle crypto modules with and without modaliases * usrmount/module-setup.sh: fixed typo * lvm: always install thin utils for lvm * kernel-modules(ARM): add mmc_block usb_storage to static list of kernel mods * dracut-functions.sh:check_block_and_slaves*() skip LVM internal devs * mkdir basic dirs in /run * network/fcoe: only redirect output to loginit.pipe, if exists * dracut.sh: no need to make subdirs in run * dracut.sh: also mkdir /run/lock, which is copied to * lvm: fix thin recognition * Add lzo, lz4 compression and read INITRD_COMPRESS * remove resume-genrules.sh * resume: fix swap detection in hostonly * base/init.sh: also mkdir /run/lock * dmsquash-live: add /dev/mapper/live-base * Doc: cleanup, extend and split and reuse * dracut.sh: do not bail out, if kernel modules dir is missing * 10i18n/parse-i18n.sh: parse rd.vconsole and rd.locale * */module-setup.sh: add comments for dracut called functions * lvm: install thin utils for non-hostonly - Patches for S/390 support * 95dasd: Install kernel modules only once * 95dasd: Only install module if normalize_dasd_arg is present * 95dasd_mod: make dasd_cio_free optional * 95zfcp: Make installation optional * 95znet: Make installation optional * Install /bin/mount * Fixup keymap setting for openSUSE * Add DASD configuration for SuSE * Add zfcp scripts for SUSE * Make logfile configurable * Add SUSE compability wrapper for dracut * Add manpage for SUSE compat mkinitrd * Work around xsltproc bug * Correct paths for openSUSE * Check for plymouth lib directories - Drop obsolete patches - Install mkinitrd-suse ------------------------------------------------------------------- Mon Oct 21 00:13:48 UTC 2013 - hrvoje.senjan@gmail.com - Remove not needed logrotate Requires ------------------------------------------------------------------- Thu Oct 17 02:22:43 UTC 2013 - crrodriguez@opensuse.org - remove use_all_paths_udev.patch, /lib/udev.. is a symlink to /usr nowadays this confuses other parts of the code causing errors/warnings during the initrd generation. ------------------------------------------------------------------- Mon Oct 14 03:48:40 UTC 2013 - crrodriguez@opensuse.org - version 034 * fcoe: add FCoE UEFI boot device support * rootfs-block: add support for the rootfallback= kernel cmdline option * btrfs: use inst_hook to install the timeout hook ------------------------------------------------------------------- Sun Oct 13 15:25:37 UTC 2013 - tittiatcoke@gmail.com - Correct patch mkinitrd-fix-boot-dir-detection. (";;" doesn't really work) ------------------------------------------------------------------- Wed Oct 9 10:59:01 UTC 2013 - tittiatcoke@gmail.com - Updated the patch mkinitrd-fix-boot-dir-detection.patch to a more generic validation that the inidcated initrd file doesn't contain a path. If no path is given, then add the default boot_dir. ------------------------------------------------------------------- Tue Oct 8 18:59:30 UTC 2013 - tittiatcoke@gmail.com - Fix again the mkinitrd script as that people don't seem to test. Added mkinitrd-fix-boot-dir-detection.patch so that an initrd is created. ------------------------------------------------------------------- Mon Oct 7 08:58:00 UTC 2013 - trenn@suse.de - Update to mainline git version 033, b7d1b6f904a5b0bdd9a5ad19149f3. - Remove all patches which went mainline: generalize_early_cpio.patch microcode_cleanup.patch acpi_override.patch mkinitrd_allow_no_option.patch mkinitrd_allow_multiple_args.patch quiet_options.patch implement_default.patch root_fs.patch suse_host_only.patch - Fix missing root fs slash in lib/udev/rules.d resulting in: /var/tmp/initramfs.Lusf6flib/udev/rules.d - bcache: removed, it's in the upstream bcache-tools package mainline git commit: 49268028b90f6344f79e3510d2 - Fix bad she-bang in mkinitrd_setup_dummy ------------------------------------------------------------------- Fri Oct 4 17:23:19 UTC 2013 - tittiatcoke@gmail.com - Add patch mkinitrd_update_bootloader.diff so that after generating the initrd, the update-bootloader is called to update grub2. ------------------------------------------------------------------- Fri Oct 4 16:26:20 UTC 2013 - tittiatcoke@gmail.com - Validate that the parameters passed with -i (initrd file) does not already contain the boot_dir. ------------------------------------------------------------------- Fri Oct 4 09:58:17 UTC 2013 - tittiatcoke@gmail.com - Bring back the versioned Provides/Obsoletes for mkinitrd. Otherwise we run into issues as that udev is conflicting with mkinitrd < 2.7.0 ------------------------------------------------------------------- Wed Oct 2 14:54:51 UTC 2013 - trenn@suse.de - Remove Provides/Obsoletes: mkinitrd versioning. Simply obsolete and provide all mkinitrd versions. ------------------------------------------------------------------- Wed Oct 2 13:19:23 UTC 2013 - mvyskocil@suse.com - Mark /etc/dracut.conf.d/02-early-microcode.conf as config file ------------------------------------------------------------------- Wed Sep 25 15:17:57 UTC 2013 - trenn@suse.de - Add ACPI table override ability: generalize_early_cpio.patch #PATCH-FIX-UPSTREAM microcode_cleanup #PATCH-FIX-UPSTREAM acpi_override.patch #PATCH-FIX-UPSTREAM - This will replace mkinitrd with dracut as the default initrd generator. Therefore Prefer: dracut tag in the project config of the repo is needed. Otherwise OSC does not know how to build installation-images (needing mkinitrd to build) and which package to take. - To switch back and try mkinitrd instead of dracut will be: Uninstall dracut: - rpm -e dracut --nodeps And install mkinitrd again: - zypper install mkinitrd - Adjust mkinitrd-dracut.sh to SUSE mkinitrd: <none> : Before gives a "usage" error -> now scans /boot for kernels and builds corresponding inirtrds for them -i -k : Pass a list of kernels and initrd targets (not sure it was worth the hassle to be able to pass) -b : Boot directory to search for kernel images -d : Change root file system. Not tested whether dracut's behavior matches exactly what our mkinitrd does. -s : Dummy (should even be obsolete in latest mkinitrd) These patches have been submitted, but now feedback from mainline yet: mkinitrd_allow_no_option.patch mkinitrd_allow_multiple_args quiet_options implement_default root_fs suse_host_only - Write caller and used parameters to syslog if mkinitrd is called. So that those can easily be fixed and checked for correctness. This should get reverted again before a bigger release. This patch will never show up mainline and should also get reverted from SUSE factory repo before the next release shows up: suse_only_logger - Build host only images for default paths in SUSE for faster build and smaller images. Imply --force in this case as well. * suse_host_only.patch ------------------------------------------------------------------- Sat Sep 21 17:36:13 UTC 2013 - crrodriguez@opensuse.org - save a few seconds on boot by always including the autofs4 kernel module in the initrd ------------------------------------------------------------------- Sat Sep 21 17:31:15 UTC 2013 - crrodriguez@opensuse.org - dracut 033 - improved hostonly device recognition - improved hostonly module recognition - do not install udev rules from /etc in generic mode - fixed LABEL= parsing for swap devices - fixed iBFT network setup - removed caching of kernel cmdline - bcache: support new blkid - ifup with dhcp, if no "ip=" specified for the interface - fixed ifup udev rules ------------------------------------------------------------------- Mon Sep 9 01:09:44 UTC 2013 - crrodriguez@opensuse.org - After testing, we need to correct a major problem, /usr/bin/mount most be installed in /bin/mount on the initrd otherwise boot fails. ------------------------------------------------------------------- Mon Sep 9 00:23:56 UTC 2013 - crrodriguez@opensuse.org - version 032 - add parameter --print-cmdline - dracut now creates the initramfs without udevadm that means the udev database does not have to populated and the initramfs can be built in a chroot with /sys /dev /proc mounted. - renamed dracut_install() to inst_multiple() for consistent naming - if $libdirs is unset, fall back to ld.so.cache paths - always assemble /usr device in initramfs - bash module added (disable it, if you really want dash) - continue to boot, if the main loop times out, in systemd mode - removed inst*() shell pure versions, dracut-install binary is in charge now - fixed ifcfg file generation for vlan - do not include adjtime and localtime anymore - fixed generation of zfcp.conf of CMS setups - install vt102 terminfo - dracut_install() is still there for backwards compat - do not strip files in FIPS mode - fixed iBFT interface configuration - fs-lib: install fsck and fsck.ext* - shutdown: fixed killall_proc_mountpoint() - network: also wait for ethernet interfaces to setup - fixed checking for FIPS mode ------------------------------------------------------------------- Mon Aug 5 04:30:48 UTC 2013 - crrodriguez@opensuse.org - version 031_git201308011055 * systemd: add support for kmod static devnodes * crypt: Wait for udev to settle before unlocking disk * systemd/dracut-pre-trigger.service: run after systemd-tmpfiles-setup-dev * systemd: use systemd in the initramfs, if installed on the system ------------------------------------------------------------------- Sat Aug 3 07:10:55 UTC 2013 - tittiatcoke@gmail.com - Drop the buildrequire for the microcode_ctl. This package is no longer in Factory and with the latest kernel (3.11) no longer required. ------------------------------------------------------------------- Sun Jul 28 00:39:55 UTC 2013 - crrodriguez@opensuse.org - version 030_git201307241235 * systemd: Replace prefdm.service with display-manager.service * modsign: do not install, if no keys present * bcache: add support for bcache * Use systemd-cat for logging on systemd systems, if logfile is empty ------------------------------------------------------------------- Sun Jul 21 17:17:58 UTC 2013 - tittiatcoke@gmail.com - Remove the http link for the Source0. Git snapshots can not be obtained that way. ------------------------------------------------------------------- Wed Jul 17 20:25:58 UTC 2013 - crrodriguez@opensuse.org - Version 029_git201307171236 * support early microcode loading in x86 ------------------------------------------------------------------- Thu Jun 27 19:41:46 UTC 2013 - crrodriguez@opensuse.org - Require pigz instead of gzip ------------------------------------------------------------------- Tue Jun 18 00:48:24 UTC 2013 - crrodriguez@opensuse.org - version 029 * fixes for the networking modules * fixes for systemd integration * fixes for the i18n module (removes dracut-font.patch now upstream) ------------------------------------------------------------------- Thu Jun 6 19:20:47 UTC 2013 - crrodriguez@opensuse.org - version 027_git201306061213 * setup correct system time and time zone in initrd * systemd integration bugfixes * lvm bugfixes. ------------------------------------------------------------------- Wed May 8 23:05:40 UTC 2013 - crrodriguez@opensuse.org - Recommend pigz for faster/parallel compression ------------------------------------------------------------------- Sat Apr 20 14:55:20 UTC 2013 - crrodriguez@opensuse.org - Ensure we use display-manager.service instead of prefdm. ------------------------------------------------------------------- Mon Apr 15 00:59:59 UTC 2013 - crrodriguez@opensuse.org - Update to 027_git201304121327 * much of patch correct-paths-for-opensuse.patch is no longer need so it has shrinked significantly. * since PRE-027 dracut requires systemd >= 199 reflect that in in the rpm buildRequires. ------------------------------------------------------------------- Wed Apr 3 09:23:22 UTC 2013 - tittiatcoke@gmail.com - dracut-027 * systemd module now requires systemd >= 199 * dracut makes use of native systemd initrd units * added hooks for new-kernel-pkg and kernel-install * hostonly is now default for fedora * comply with the BootLoaderSpec paths http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec * added rescue module * host_fs_types is now a hashmap * new dracut argument "--regenerate-all" * new dracut argument "--noimageifnotneeded" * new man page dracut.bootup * install all host filesystem drivers * use -D_FILE_OFFSET_BITS=64 to build dracut-install ------------------------------------------------------------------- Tue Mar 19 21:32:09 UTC 2013 - crrodriguez@opensuse.org - Update to 026_git201303180829 * bugfixes * adds bash completion Support - Most importantly, fix the (silly) compatibility patch that changes the name from initramfs to initrd that went broken in last update (all initrds were suffixed by .img) ------------------------------------------------------------------- Tue Mar 12 22:01:14 UTC 2013 - crrodriguez@opensuse.org - dracut-026 - introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory /usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same filenames in /etc/dracut.conf.d. Packages should use /usr/lib/dracut/dracut.conf.d rather than /etc/dracut.conf.d for drop-in configuration files. /etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator. - uses systemd-198 native initrd units - totally rely on the fstab-generator in systemd mode for block devices - dracut systemd now uses dracut.target rather than basic.target - dracut systemd services optimize themselves away - fixed hostonly parameter generation - turn off curl globbing (fixes IPv6) - modify the udev rules on install and not runtime time - enable initramfs building without kernel modules (fixed regression) - in the initqueue/timeout, reset the main loop counter, as we see new udev events or initqueue/work - fixed udev rule installation ------------------------------------------------------------------- Fri Feb 22 00:16:46 UTC 2013 - crrodriguez@opensuse.org - Update to 025_git201302211113 * Support out-of-tree and updated drivers in initramfs creation * shutdown: call "losetup -D" on shutdown * Mount /proc before including dracut-lib.sh. * dracut.sh: make /var/log a symlink to /run/log * systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell * kernel-modules: Add ehci support for kernel 3.8+ * Other bugfixes ------------------------------------------------------------------- Sun Feb 3 02:07:39 UTC 2013 - crrodriguez@opensuse.org - BuildRequires: pkgconfig(systemd) so %{_unitdir} is defined and systemd integration works.. ------------------------------------------------------------------- Mon Jan 28 17:52:28 UTC 2013 - crrodriguez@opensuse.org - Require modutils instead of module-init-tools. ------------------------------------------------------------------- Thu Jan 24 09:57:18 UTC 2013 - hrvoje.senjan@gmail.com - Update to release 025: + do not strip signed kernel modules + add sosreport script and generate /run/initramfs/sosreport.txt + make short uuid specification for allow-discards work + turn off RateLimit for the systemd journal + fixed MAC address assignment + add systemd checkisomd5 service + splitout drm kernel modules from plymouth module + add 'swapoff' to initramfs to fix shutdown/reboot + add team device support + add pre-shutdown hook + kill all processes in shutdown and report remaining ones + "--device" changed to "--add-device" and "add_device=" added for conf files + add memory usage trace to different hook points + cope with optional field #7 in /proc/self/mountinfo + lots of small bugfixes ------------------------------------------------------------------- Thu Dec 6 20:15:41 UTC 2012 - crrodriguez@opensuse.org - dracut wants "strip" installed which is part of binutils recommend that package ------------------------------------------------------------------- Mon Nov 5 08:44:30 UTC 2012 - tittiatcoke@gmail.com - Added additional patches to make dracut work in an openSUSE environment. - Added patch (use_all_paths_udev.patch) to use both /usr/lib/udev and /lib/udev as long as not all packages migrated. - Added patch (use_initrd_insteadof_initramfs.patch) to change the naming of the generated initrd file to be more openSUSE - Added patch (use_sysconfig_values_correctly.patch) to read the correct keymap value from /etc/sysconfig. (.gz extension) ------------------------------------------------------------------- Thu Nov 1 17:47:45 UTC 2012 - tittiatcoke@gmail.com - Update to release 024: + new dracut option "--device" + new dracut kernel command line options "rd.auto" + new dracut kernel command line options "rd.noverifyssl" + new dracut option "--kernel-cmdline" and "kernel_cmdline" option for default parameters + fixes for systemd and crypto + fix for kexec in shutdown, if not included in initramfs + create the initramfs non-world readable + prelink/preunlink in the initramfs + strip binaries in the initramfs by default now + various FIPS fixes + various dracut-install fixes - Added patch (correct-paths-for-opensuse.patch) to ensure correct paths for openSUSE (Plymouth) ------------------------------------------------------------------- Fri Sep 28 12:10:20 UTC 2012 - fcrozat@suse.com - Add initramfs-non-world-readable.patch: fix CVE-2012-4453 (bnc#782734). ------------------------------------------------------------------- Wed Aug 1 13:39:16 UTC 2012 - fcrozat@suse.com - Update to release 023: + resume from hibernate fixes + -N option for --no-hostonly + support for systemd crypto handling + new dracut module "crypt-loop" + deprecate the old kernel command line options + more documentation + honor CFLAGS for dracut-install build + multipath fixes + / is mounted according to rootflags parameter but forced ro at first. Later it is remounted according to /etc/fstab + rootflags parameter and "ro"/"rw". + support for xfs / reiserfs separate journal device + new "ro_mnt" option to force ro mount of / and /usr + root on cifs support + dracut-install: fixed issue for /var/tmp containing a symlink + only lazy resolve with ldd, if the /var/tmp partition is not mounted with "noexec". + i18n: fixed inclusion of "include" keymaps - Drop dracut_makefile_cflags_pass.patch and separate-journal.patch (merged upstream) ------------------------------------------------------------------- Mon Jul 23 15:37:59 UTC 2012 - fcrozat@suse.com - Update to release 022: + fixed host-only kernel module bug - Changes from release 021: + fixed systemd in the initramfs (requires systemd >= 187) + dracut-install: massive speedup with /var on the same filesystem with COW copy. + dracut-install: moved to /usr/lib/dracut until it becomes a general purpose toot + new options: "rd.usrmount.ro" and "rd.skipfsck" + less mount/umount + apply "ro" on the kernel command line also to /usr + mount according to fstab, if neither "ro" or "rw" is specified + skip fsck for xfs and btrfs. remount is enough + give emergency_shell if /usr mount failed + dracut now uses getopt: - options can be position independent now!! - we can now use --option=<arg> + added option "--kver=<kernel-version>", and the image location can be omitted : dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64 + dracut.sh: for --include copy also the symbolic links + man pages: lsinitrd and mkinitrd added + network: We do not support renaming in the kernel namespace anymore (as udev does that not anymore). So, if a user wants to use ifname, he has to rename to a custom namespace. "eth[0-9]+" is not allowed anymore. + resume: moved the resume process to the initqueue. This should prevent accidently mounting the root file system. + improve running testsuite - Clean up package to be openSUSE only package and follow openSUSE standard. - Add dracut module to convert openSUSE/SLE initrd cmdline parameters into dracut parameters at boot time. - Add separate-journal.patch: add support for separate journal for reiserfs and XFS. ------------------------------------------------------------------- Thu Jul 12 15:39:12 UTC 2012 - trenn@suse.de - First check in of version 020 - Fix Makefile so that make -e CFLAGS="$RPM_OPT_FLAGS" can be passed - Remove Requires on libcap - some more changes, most sent mainline
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
