File libgcj48.spec of Package libffi48.10984

Overview Repositories Revisions Requests Users Attributes Meta

File libgcj48.spec of Package libffi48.10984

#
# spec file for package libgcj48
#
# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
# icecream 0

%define building_libjava 1
#
# spec file for package gcc48
#
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via https://bugs.opensuse.org/
#

# Ada currently fails to build on a few platforms, enable it only
# on those that work
# Note that AdaCore only supports %ix86, x86_64 and ia64
%if %{suse_version} >= 1310
%define ada_arch %ix86 x86_64 ppc ppc64 s390 ia64
%else
%define ada_arch %ix86 x86_64 ppc s390 ia64
%endif

%ifarch %ada_arch
%define build_ada !0%{?building_libjava:1}%{?building_libffi:1}
%else
%define build_ada 0
%endif

%define quadmath_arch %ix86 x86_64 ia64
%define tsan_arch x86_64
%define asan_arch x86_64 %ix86 ppc ppc64 %sparc
%define itm_arch x86_64 %ix86 %arm ppc ppc64 ppc64le s390 s390x %sparc
%define atomic_arch x86_64 %ix86 %arm ppc ppc64 ppc64le s390 s390x %sparc m68k ia64

# We don't want to build java
%ifarch mips
%define build_java 0
%define build_libjava 0
%else
%define build_java 1
%define build_libjava 0%{?building_libjava:1}%{?building_libffi:1}%{?building_testsuite:1}
%endif

%define build_cp 1
%define build_fortran !0%{?building_libjava:1}%{?building_libffi:1}
%define build_objc !0%{?building_libjava:1}%{?building_libffi:1}
%define build_objcp !0%{?building_libjava:1}%{?building_libffi:1}
%define build_with_mudflap 0

%if %{build_objcp}
%define build_cp 1
%define build_objc 1
%endif

%if %{build_libjava}
%define build_cp 1
%endif

# For optional compilers only build C, C++, Fortran and Ada
%if 0%{?build_optional_compiler_languages:1}
%define build_java 0
%define build_libjava 0
%define build_objc 0
%define build_objcp 0
%endif

# Shared library SONAME versions
%ifarch hppa
%define libgcc_s 4
%else
%ifarch m68k
%define libgcc_s 2
%else
%define libgcc_s 1
%endif
%endif
%define libgcj_sover 14
%define libgcj_bc_sover 1
%define libffi_sover 4
%define libmudflap_sover 0
%define libgomp_sover 1
%define libstdcxx_sover 6
%define libobjc_sover 4
%define libgfortran_sover 3
%define libquadmath_sover 0
%define libasan_sover 0
%define libtsan_sover 0
%define libatomic_sover 1
%define libitm_sover 1

# Shared library package suffix
# This is used for the "non-standard" set of libraries, the standard
# being defined by %product_libs_gcc_ver, the GCC version that should
# provide un-suffixed shared library packages following the shared-library
# policy.  Even suffixed variants should provide the shared-library policy
# mandated names and ensure they conflict with each other.
# Individual shared libraries can be directed to be built from individual
# gcc versions by defining %product_libs_gcc_ver_libgcc_s1 for example,
# generally %product_libs_gcc_ver_%name%sover, similarly.

%define itsme48 1
%define plv_ %{!?product_libs_gcc_ver:48}%{?product_libs_gcc_ver}
%define plv() %{expand:%%{!?itsme%{expand:%%{!?product_libs_gcc_ver_%{1}%{2}:%%{plv_}}%%{?product_libs_gcc_ver_%{1}%{2}}}:-gcc48}}

%define libgcc_s_suffix %{plv libgcc_s %{libgcc_s}}
# libgcj SONAME changes with every GCC version
%define libgcj_suffix %nil
%define libgcj_bc_suffix %{plv libgcj_bc %{libgcj_bc_sover}}
%define libffi_suffix %{plv libffi %{libffi_sover}}
%define libmudflap_suffix %{plv libmudflap %{libmudflap_sover}}
%define libgomp_suffix %{plv libgomp %{libgomp_sover}}
%define libstdcxx_suffix %{plv libstdcxx %{libstdcxx_sover}}
%define libobjc_suffix %{plv libobjc %{libobjc_sover}}
%define libgfortran_suffix %{plv libgfortran %{libgfortran_sover}}
%define libquadmath_suffix %{plv libquadmath %{libquadmath_sover}}
%define libasan_suffix %{plv libasan %{libasan_sover}}
%define libtsan_suffix %{plv libtsan %{libtsan_sover}}
%define libatomic_suffix %{plv libatomic %{libatomic_sover}}
%define libitm_suffix %{plv libitm %{libitm_sover}}

%if %{suse_version} >= 1220
%define selfconflict() %1
%else
%define selfconflict() otherproviders(%1)
%endif

Name:           libgcj48
# With generated files in src we could drop the following
BuildRequires:  bison
BuildRequires:  flex
BuildRequires:  gettext-devel
%if %{suse_version} > 1220
BuildRequires:  makeinfo
%else
BuildRequires:  texinfo
%endif
# until here, but at least renaming and patching info files breaks this
BuildRequires:  gcc-c++
BuildRequires:  glibc-devel-32bit
BuildRequires:  mpc-devel
BuildRequires:  mpfr-devel
BuildRequires:  perl
BuildRequires:  zlib-devel
%if %{suse_version} >= 1230
%if %{suse_version} < 1330
%ifarch %ix86 x86_64 ppc ppc64 s390 s390x ia64 %sparc hppa %arm
BuildRequires:  cloog-isl-devel
BuildRequires:  isl-devel
%endif
%endif
%endif
%if %{build_ada}
%if %{suse_version} > 1230
%define hostsuffix %{binsuffix}
BuildRequires:  gcc48-ada
%else
%define hostsuffix %{nil}
BuildRequires:  gcc-ada
%endif
%endif
%if 0%{?building_libjava:1}%{?building_testsuite:1}
BuildRequires:  fastjar
# For building the libstdc++ API reference
BuildRequires:  doxygen
BuildRequires:  graphviz
%endif
%if 0%{?building_libffi:1}
BuildRequires:  pkg-config
%endif
%ifarch ia64
BuildRequires:  libunwind-devel
%endif
%if 0%{?run_tests:1}
BuildRequires:  dejagnu
BuildRequires:  expect
BuildRequires:  gdb
%endif

%define separate_bi32 0
%define separate_bi64 0
%ifarch ppc sparcv9
# Beware, this does _not_ separate libgcj, as for that one multilibing
# is inactive for the time being
%define separate_bi64 1
%endif
%ifarch x86_64 s390x ppc64 sparc64
%define separate_bi32 1
%endif

# Define two macros to trigger -32bit or -64bit package variants
%define separate_biarch 0
%if %{separate_bi32}
%define separate_biarch 1
%define separate_biarch_suffix -32bit
%endif
%if %{separate_bi64}
%define separate_biarch 1
%define separate_biarch_suffix -64bit
%endif

%ifarch x86_64 ia64 s390x alpha ppc64 sparc64
# 64-bit is primary build target
%define build_primary_64bit 1
%else
%define build_primary_64bit 0
%endif

%define biarch_libjava 0

%define biarch_targets x86_64 s390x powerpc64 powerpc sparc sparc64

URL:            https://gcc.gnu.org/
Version:        4.8.5
Release:        0
%define gcc_version %(echo %version | sed 's/+.*//')
%define gcc_dir_version %(echo %gcc_version | cut -d '.' -f 1-2)
%define gcc_snapshot_revision %(echo %version | sed 's/[34]\.[0-9]\.[0-6]//' | sed 's/+/-/')
%define binsuffix -4.8

%if !0%{?building_libjava:1}%{?building_libffi:1}%{?building_testsuite:1}
Requires:       binutils
Requires:       cpp48 = %{version}-%{release}
Requires:       glibc-devel
Requires:       libgcc_s%{libgcc_s} >= %{version}-%{release}
Requires:       libgomp%{libgomp_sover} >= %{version}-%{release}
%if %{build_with_mudflap}
Requires:       libmudflap%{libmudflap_sover} >= %{version}-%{release}
Requires:       libmudflapth%{libmudflap_sover} >= %{version}-%{release}
%endif
%ifarch %asan_arch
Requires:       libasan%{libasan_sover} >= %{version}-%{release}
%endif
%ifarch %tsan_arch
Requires:       libtsan%{libtsan_sover} >= %{version}-%{release}
%endif
%ifarch %atomic_arch
Requires:       libatomic%{libatomic_sover} >= %{version}-%{release}
%endif
%ifarch %itm_arch
Requires:       libitm%{libitm_sover} >= %{version}-%{release}
%endif
Suggests:       gcc48-info gcc48-locale
%endif

BuildRoot:      %{_tmppath}/%{name}-%{version}-build
Source:         gcc-%{version}.tar.bz2
Source1:        change_spec
Source3:        gcc48-rpmlintrc
Source4:        ecj.jar
Source5:        README.First-for.SuSE.packagers
Source6:        baselibs.conf
Source7:        libgcj48-rpmlintrc
Source8:        libffi48-rpmlintrc

#testpatch begin

Patch1:         gcc-dir-version.patch
Patch2:         gcc-sles-version.patch
Patch3:         gcc-noalias-warn.diff
Patch7:         gcc-add-defaultsspec.diff
Patch8:         Wunprototyped-calls.diff
Patch23:        libjava-no-multilib.diff
Patch24:        tls-no-direct.diff
Patch30:        gcc43-no-unwind-tables.diff
Patch31:        libjava-aarch64-support.diff
Patch32:        libgcj_bc-install.patch
Patch33:        m68k-notice-update-cc.patch
Patch34:        pr58369.patch
Patch36:        stack-protector-aarch64.patch
Patch37:        function-profiling-aarch64.patch
Patch38:        gcc48-lto-plugin-short-readwrite.diff
Patch39:        gcc48-libstdc++-api-reference.patch
Patch40:        aarch64-vmlaq-lane-s32.diff
Patch41:        gcc48-bnc884738.patch
Patch43:        gcc48-bnc889990.patch
Patch44:        gcc48-aarch64-bsc948168.patch
Patch45:        gcc48-remove-mpfr-2.4.0-requirement.patch
Patch46:        gcc48-pr66306.patch
Patch47:        gcc48-bnc922534.patch
Patch48:        gcc48-aarch64-pr60010.patch
Patch49:        gcc48-aarch64-pr61997.patch
Patch50:        gcc48-bnc945842.patch
Patch500:       gcc48-pr65612.patch
Patch501:       gcc48-bnc1028744.patch
Patch502:       gcc48-bnc1050947.patch
Patch503:       gcc48-stack-probe.diff
Patch504:       gcc48-mindirect-branch.diff
Patch505:       gcc48-backport-pr86952-jump-tables.patch
# A set of patches from the RH srpm
Patch51:        gcc41-ia64-stack-protector.patch
Patch55:        gcc41-java-slow_pthread_self.patch
Patch57:        gcc41-ppc32-retaddr.patch
# Some patches taken from Debian
Patch60:        gcc44-textdomain.patch
Patch61:        gcc44-rename-info-files.patch
# Patches from IBM
Patch70:        gcc48-ibm-power8-bnc871635.diff
Patch71:        gcc48-s390x-keep-leaf-when-profiled.diff
Patch72:        gcc48-bnc947791.patch
Patch73:        gcc48-ppc-bnc949000.patch
Patch74:        gcc48-bnc955382.patch
Patch75:        gcc48-s390-spectre.patch
# Upstream backports
Patch80:        gcc48-bnc970009.patch
Patch81:        gcc48-bnc977654.patch
Patch82:        gcc48-bnc981311.diff
Patch83:        gcc48-bnc988274.patch
Patch84:        gcc48-bnc1011348-dr1288.patch
Patch85:        gcc48-bnc1044016.patch
Patch86:        gcc48-bnc1087932.patch
# Patches from us
Patch100:       gcc48-bnc976627.patch
Patch101:       gcc48-bnc1082130.patch
Patch102:       gcc48-aarch64-hack-reload-alt.diff
Patch103:       gcc48-build-sle15.diff

#testpatch end

Summary:        Java Runtime Library for gcc
License:        GPL-2.0-with-classpath-exception
Group:          System/Libraries
%if 0%{suse_version} > 1000
Recommends:     libgcj48-jar = %{version}-%{release}
%endif
Provides:       libgcj%{libgcj_sover} = %{version}-%{release}
Conflicts:      %selfconflict libgcj%{libgcj_sover}
Provides:       libgij%{libgcj_sover} = %{version}-%{release}
Conflicts:      %selfconflict libgij%{libgcj_sover}
Provides:       libgcj-tools%{libgcj_sover} = %{version}-%{release}
Conflicts:      %selfconflict libgcj-tools%{libgcj_sover}

%description 
This library is needed if you want to use the GNU Java compiler, gcj.
Source code for this package is in gcc.

%post -n libgcj48 -p /sbin/ldconfig

%postun -n libgcj48 -p /sbin/ldconfig

%package -n gcc48-java
Summary:        The GNU Java Compiler
License:        GPL-3.0-or-later
Group:          Development/Languages/Java
Requires:       gcc48 = %{version}
Requires:       libgcj48-devel = %{version}-%{release}

%description -n gcc48-java
The Java compiler from the GCC-tools-suite.

%package -n libgcj_bc%{libgcj_bc_sover}%{libgcj_bc_suffix}
Summary:        Fake library for BC-ABI compatibility.
# libgcj_bc is special in that it just contains a symlink to
# a proper libgcj version.  So require that library and add
# provides for the shlib version as created at link time
License:        GPL-2.0-with-classpath-exception
Group:          Development/Libraries/Java
Requires:       libgcj%{libgcj_sover} >= %{version}-%{release}
%ifarch x86_64 ia64 ppc64 s390x sparc64 aarch64
Provides:       libgcj_bc.so.%{libgcj_bc_sover}()(64bit)
%else
Provides:       libgcj_bc.so.%{libgcj_bc_sover}
%endif
Provides:       libgcj_bc%{libgcj_bc_sover} = %{version}-%{release}
# Only one package may provide this - allows multiple gcc versions
# to co-exist without an overly large list of provides/obsoletes
Conflicts:      %selfconflict libgcj_bc%{libgcj_bc_sover}

%description -n libgcj_bc%{libgcj_bc_sover}%{libgcj_bc_suffix}
A fake library that is used at link time only. It ensures that
binaries built with the BC-ABI link against a constant SONAME.
This way, BC-ABI binaries continue to work if the SONAME underlying
libgcj.so changes.

%package -n libgcj48-jar
Summary:        Java runtime library (jar files).
License:        GPL-2.0-with-classpath-exception
Group:          Development/Libraries/Java

%description -n libgcj48-jar
These are the jar files that go along with the gcj front end to gcc.

%package -n libgcj48-devel
Summary:        Include Files and Libraries mandatory for Development.
License:        GPL-2.0-with-classpath-exception
Group:          Development/Libraries/Java
Requires:       glibc-devel
Requires:       gtk2-devel
Requires:       libart_lgpl-devel
Requires:       libgcj%{libgcj_sover} >= %{version}-%{release}
Requires:       libgcj48-jar = %{version}-%{release}
Requires:       libgcj_bc%{libgcj_bc_sover} >= %{version}-%{release}
Requires:       libstdc++48-devel = %{version}
Requires:       zlib-devel
%ifarch ia64
Requires:       libunwind-devel
%endif

%description -n libgcj48-devel
This package contains all necessary include files and libraries needed
to develop applications that require these.

%package -n gcc48-gij
Summary:        Java Bytecode Interpreter for gcc
License:        GPL-2.0-with-classpath-exception
Group:          Development/Libraries/Java
Requires:       libgcj%{libgcj_sover} >= %{version}-%{release}

%description -n gcc48-gij
This package contains the java bytecode interpreter gij and related tools.

%package -n libstdc++48-doc
Summary:        Documentation for the GNU C++ standard library
License:        GPL-3.0-or-later
Group:          Documentation/HTML
%if 0%{?suse_version} >= 1120
BuildArch:      noarch
%endif

%description -n libstdc++48-doc
Extensive HTML documentation for the GNU C++ standard library.

%package -n libffi%{libffi_sover}%{libffi_suffix}
Summary:        Foreign Function Interface library
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Provides:       libffi%{libffi_sover} = %{version}-%{release}
# Only one package may provide this - allows multiple gcc versions
# to co-exist without an overly large list of provides/obsoletes
Conflicts:      %selfconflict libffi%{libffi_sover}

%description -n libffi%{libffi_sover}%{libffi_suffix}
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.

%post -n libffi%{libffi_sover}%{libffi_suffix} -p /sbin/ldconfig

%postun -n libffi%{libffi_sover}%{libffi_suffix} -p /sbin/ldconfig
%package -n libffi%{libffi_sover}%{libffi_suffix}-32bit
Summary:        Foreign Function Interface library
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Provides:       libffi%{libffi_sover}-32bit = %{version}-%{release}
# Only one package may provide this - allows multiple gcc versions
# to co-exist without an overly large list of provides/obsoletes
Conflicts:      %selfconflict libffi%{libffi_sover}-32bit

%description -n libffi%{libffi_sover}%{libffi_suffix}-32bit
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.

%post -n libffi%{libffi_sover}%{libffi_suffix}-32bit -p /sbin/ldconfig

%postun -n libffi%{libffi_sover}%{libffi_suffix}-32bit -p /sbin/ldconfig
%package -n libffi%{libffi_sover}%{libffi_suffix}-64bit
Summary:        Foreign Function Interface library
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Provides:       libffi%{libffi_sover}-64bit = %{version}-%{release}
# Only one package may provide this - allows multiple gcc versions
# to co-exist without an overly large list of provides/obsoletes
Conflicts:      %selfconflict libffi%{libffi_sover}-64bit

%description -n libffi%{libffi_sover}%{libffi_suffix}-64bit
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.

%post -n libffi%{libffi_sover}%{libffi_suffix}-64bit -p /sbin/ldconfig

%postun -n libffi%{libffi_sover}%{libffi_suffix}-64bit -p /sbin/ldconfig

%package -n libffi48-devel
Summary:        Foreign Function Interface library development files
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Requires:       libffi%{libffi_sover} >= %{version}-%{release}
Provides:       libffi-devel = %{version}-%{release}
Conflicts:      %selfconflict libffi-devel

%description -n libffi48-devel
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
%package -n libffi48-devel-32bit
Summary:        Foreign Function Interface library development files
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Requires:       libffi%{libffi_sover}-32bit >= %{version}-%{release}
Provides:       libffi-devel-32bit = %{version}-%{release}
Conflicts:      %selfconflict libffi-devel-32bit

%description -n libffi48-devel-32bit
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
%package -n libffi48-devel-64bit
Summary:        Foreign Function Interface library development files
License:        BSD-3-Clause
Group:          Development/Languages/C and C++
Requires:       libffi%{libffi_sover}-64bit >= %{version}-%{release}
Provides:       libffi-devel-64bit = %{version}-%{release}
Conflicts:      %selfconflict libffi-devel-64bit

%description -n libffi48-devel-64bit
A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.

%package -n gcc48-testresults
Summary:        Testsuite results
License:        SUSE-Public-Domain
Group:          Development/Languages/C and C++

%description -n gcc48-testresults
Results from running the gcc and target library testsuites.

# Define the canonical target and host architecture
#   %gcc_target_arch  is supposed to be the full target triple
#   %cross_arch       is supposed to be the rpm target variant arch
#   %TARGET_ARCH      will be the canonicalized target CPU part
#   %HOST_ARCH        will be the canonicalized host CPU part
%if 0%{?gcc_target_arch:1}
%define TARGET_ARCH %(echo %{cross_arch} | sed -e "s/i.86/i586/;s/ppc/powerpc/;s/sparc64.*/sparc64/;s/sparcv.*/sparc/;")
%else
%define TARGET_ARCH %(echo %{_target_cpu} | sed -e "s/i.86/i586/;s/ppc/powerpc/;s/sparc64.*/sparc64/;s/sparcv.*/sparc/;")
%endif
%define biarch %(case " %{biarch_targets} " in (*" %{TARGET_ARCH} "*) echo 1;; (*) echo 0;; esac)

%define HOST_ARCH %(echo %{_host_cpu} | sed -e "s/i.86/i586/;s/ppc/powerpc/;s/sparc64.*/sparc64/;s/sparcv.*/sparc/;")
%ifarch ppc
%define GCCDIST powerpc64-suse-linux
%else
%ifarch %sparc
%define GCCDIST sparc64-suse-linux
%else
%ifarch %arm
%define GCCDIST %{HOST_ARCH}-suse-linux-gnueabi
%else
%define GCCDIST %{HOST_ARCH}-suse-linux
%endif
%endif
%endif

%define libsubdir %{_libdir}/gcc/%{GCCDIST}/%{gcc_dir_version}
%define gxxinclude %{_prefix}/include/c++/%{gcc_dir_version}

# Versionspecific directories
%define versmainlibdir %{libsubdir}
%define versmainlibdirbi32 %{libsubdir}/32
%define versmainlibdirbi64 %{libsubdir}/64
%ifarch ppc
%define versmainlibdirbi32 %{libsubdir}
%define versmainlibdirbi64 %{libsubdir}/64
%endif
%if %{build_primary_64bit}
%define versmainlibdirbi %{versmainlibdirbi32}
%else
%define versmainlibdirbi %{versmainlibdirbi64}
%endif

%define mainlibdir %{_libdir}
%define mainlibdirbi32 %{_prefix}/lib
%define mainlibdirbi64 %{_prefix}/lib64
%if %{build_primary_64bit}
%define mainlibdirbi %{mainlibdirbi32}
%else
%define mainlibdirbi %{mainlibdirbi64}
%endif

# Now define a few macros that make it easy to package libs and
# related files just to the right package, without caring for the
# exact path the files are in.
#   %mainlib  package X from all dirs that belong to the main package
#   %biarchlib   package X from all dirs that belong to the -32/64bit package
%define mainlib() %{mainlibdir}/%1\
%{nil}
%define biarchlib() %{nil}
%if %{biarch}
%if !%{separate_biarch}
%define mainlib() %{mainlibdir}/%1\
%{mainlibdirbi}/%1\
%{nil}
%else
%define biarchlib() %{mainlibdirbi}/%1\
%{nil}
%endif
%endif

%define versmainlib() %{versmainlibdir}/%1\
%{nil}
%define versbiarchlib() %{nil}
%if %{biarch}
%if !%{separate_biarch}
%define versmainlib() %{versmainlibdir}/%1\
%{versmainlibdirbi}/%1\
%{nil}
%else
%define versbiarchlib() %{versmainlibdirbi}/%1\
%{nil}
%endif
%endif

%prep
%setup -q -n gcc-%{gcc_version}%{gcc_snapshot_revision}

#test patching start

%patch1
%patch2
%patch3
%patch7
%patch8
%patch23
%patch24
%patch30
%patch31
%patch32 -p1
%patch33 -p1
%patch34 -p1
%patch36 -p1
%patch37 -p1
%patch38
%patch39
%patch40
%patch41
%patch43 -p1
%patch44
%if %{suse_version} < 1310
%patch45
%endif
%patch46 -p1
%patch47
%patch48 -p1
%patch49 -p1
%patch50
%patch500
%patch501
%patch502
%patch503
%patch504 -p1
%patch505 -p1
%patch51
%patch55
%patch57
%patch60
%patch61
%patch70
%patch71 -p1
%patch72
%patch73
%patch74
%patch75 -p1
%patch80
%patch81
%patch82
%patch83 -p1
%patch84
%patch85
%patch86
%patch100
%patch101
%ifarch aarch64
# this patch touches reload for a aarch64 specific problem
# (bsc#1093797), so it's fiddly, hence only apply to aarch64
%patch102
%endif
%patch103

#test patching end

# We are configuring ppc as ppc64 but with switched multilibs.  Adjust
# the libstdc++ abi testsuite baseline files accordingly
%ifarch ppc
if [ -d libstdc++-v3/config/abi/post/powerpc64-linux-gnu ]; then
  mkdir -p libstdc++-v3/config/abi/post/powerpc64-linux-gnu/64
  mv libstdc++-v3/config/abi/post/powerpc64-linux-gnu/baseline_symbols.txt \
	libstdc++-v3/config/abi/post/powerpc64-linux-gnu/64/
  mv libstdc++-v3/config/abi/post/powerpc64-linux-gnu/32/baseline_symbols.txt \
	libstdc++-v3/config/abi/post/powerpc64-linux-gnu/
fi
%endif

%build
# Avoid rebuilding of generated files
contrib/gcc_update --touch
# Avoid fucking up testsuite results with Java and indirect dispatch
export SUSE_ASNEEDED=0
# Split version file into version used for directories (X.Y) and
# version to report with --version (X.Y.Z).
# See also gcc-dir-version.patch.
# Also decrement the patchlevel version by one
if test `cat gcc/DEV-PHASE` == "prerelease"; then
  ( cat gcc/BASE-VER | cut -d '.' -f 1-2 | tr -d '\n'; echo -n .; cat gcc/BASE-VER | cut -d '.' -f 3 | tr '0123456789' '0012345678' ) > gcc/FULL-VER
else
  mv gcc/BASE-VER gcc/FULL-VER
fi
cat gcc/FULL-VER | cut -d '.' -f 1-2 > gcc/BASE-VER

rm -rf obj-%{GCCDIST}
mkdir obj-%{GCCDIST}
cd obj-%{GCCDIST}
RPM_OPT_FLAGS="$RPM_OPT_FLAGS -U_FORTIFY_SOURCE"
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-fno-rtti//g' -e 's/-fno-exceptions//g' -e 's/-Wmissing-format-attribute//g' -e 's/-fstack-protector[^ ]*//g' -e 's/-ffortify=.//g' -e 's/-Wall//g' -e 's/-m32//g' -e 's/-m64//g'`
%ifarch %ix86
# -mcpu is superceded by -mtune but -mtune is not supported by
# our bootstrap compiler.  -mcpu gives a warning that stops
# the build process, so remove it for now.  Also remove all other
# -march and -mtune flags.  They are superseeded by proper
# default compiler settings now.
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-mcpu=i.86//g' -e 's/-march=i.86//g' -e 's/-mtune=i.86//g'`
%endif
%ifarch s390 s390x
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-fsigned-char//g'`
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-O1/-O2/g'`
%endif
%if 0%{?gcc_target_arch:1}
# Kill all -march/tune/cpu because that screws building the target libs
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/-m$arch\|tune\|cpu$=[^ ]*//g'`
%endif
# Replace 2 spaces by one finally
RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS|sed -e 's/  / /g'`

languages=c
%if %{build_cp}
languages=$languages,c++
%endif
%if %{build_objc}
languages=$languages,objc
%endif
%if %{build_fortran}
languages=$languages,fortran
%endif
%if %{build_objcp}
languages=$languages,obj-c++
%endif
%if %{build_java}
languages=$languages,java
%endif
%if %{build_ada}
languages=$languages,ada
%endif

J=%{?jobs:%jobs}
if test -z "$J"; then
  J=$(getconf _NPROCESSORS_CONF)
  JL=$(($J * 2))
else
  test 1 -gt "$J" && J=1
  JL=$(($(getconf _NPROCESSORS_CONF)*2))
fi
if test "$J" == "0"; then
  J=1
fi
if test "$JL" == "0"; then
  JL=1
fi
PARALLEL="-j$J -l$JL"

# we don't want some miscompiles in the testsuite, or some fault in
# the compiler to kill the machine.  Hence we limit the amount of memory
# by the physical RAM plus half of swap
#MEM=$(free -m | awk '/^Mem:/ {print $2}')
#SWAP=$(free -m | awk '/^Swap:/ {print $2}')
#ulimit -v $(((MEM + SWAP/2)*1024))

# In general we want to ship release checking enabled compilers
# and run BETA with checking enabled.
#ENABLE_CHECKING="--enable-checking=yes"
ENABLE_CHECKING="--enable-checking=release"

# Work around tail/head -1 changes
export _POSIX2_VERSION=199209

%if %{build_ada}
# Using the host gnatmake like
#   CC="gcc%{hostsuffix}" GNATBIND="gnatbind%{hostsuffix}"
#   GNATMAKE="gnatmake%{hostsuffix}"
# doesn't work due to PR33857, so an un-suffixed gnatmake has to be
# available
mkdir -p host-tools/bin
cp -a /usr/bin/gnatmake%{hostsuffix} host-tools/bin/gnatmake
cp -a /usr/bin/gnatlink%{hostsuffix} host-tools/bin/gnatlink
cp -a /usr/bin/gnatbind%{hostsuffix} host-tools/bin/gnatbind
cp -a /usr/bin/gcc%{hostsuffix} host-tools/bin/gcc
ln -sf /usr/%{_lib} host-tools/%{_lib}
export PATH="`pwd`/host-tools/bin:$PATH"
%endif
#%if 0%{?gcc_target_arch:1}
#%else
#	--enable-threads=posix \
#%endif
#	--enable-shared \
%if "%{TARGET_ARCH}" == "armv7hl"
# temporary workaround for a miscompilation of hash functions in java code
GCJ_EXTRA_FLAGS="-marm"
%endif
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" XCFLAGS="$RPM_OPT_FLAGS" \
TCFLAGS="$RPM_OPT_FLAGS" GCJFLAGS="$RPM_OPT_FLAGS $GCJ_EXTRA_FLAGS" \
../configure \
	--prefix=%{_prefix} \
	--infodir=%{_infodir} \
	--mandir=%{_mandir} \
	--libdir=%{_libdir} \
	--libexecdir=%{_libdir} \
	--enable-languages=$languages \
	$ENABLE_CHECKING \
	--with-gxx-include-dir=%{_prefix}/include/c++/%{gcc_dir_version} \
	--enable-ssp \
	--disable-libssp \
	--disable-plugin \
	--with-bugurl="https://bugs.opensuse.org/" \
	--with-pkgversion="SUSE Linux" \
%if !%{build_libjava}
        --disable-libgcj \
%else
	--with-java-home=%{_libdir}/jvm/java-1.5.0-gcj%{binsuffix}-1.5.0.0/jre \
	--with-ecj-jar=%{libsubdir}/ecj.jar \
        --disable-java-awt \
%if !%{biarch_libjava}
        --disable-libjava-multilib \
%endif
%endif
%if !%{build_with_mudflap}
	--disable-libmudflap \
%endif
	--with-slibdir=/%{_lib} \
	--with-system-zlib \
	--enable-__cxa_atexit \
	--enable-libstdcxx-allocator=new \
	--disable-libstdcxx-pch \
	--enable-version-specific-runtime-libs \
%if 0%{suse_version} > 1100
	--enable-linker-build-id \
%endif
%if 0%{suse_version} < 1220
        --disable-initfini-array \
%endif
	--enable-linux-futex \
%if 0%{!?gcc_target_arch:1}
	--program-suffix=%{binsuffix} \
%ifarch ia64
	--with-system-libunwind \
%else
	--without-system-libunwind \
%endif
%endif
%if 0%{?gcc_target_arch:1}
	--target=%{gcc_target_arch} \
	--disable-nls \
%if 0%{?sysroot:1}
	--with-sysroot=%sysroot \
%else
	--with-sysroot=%{_prefix}/%{gcc_target_arch} \
%endif
%if 0%{?build_sysroot:1}
	--with-build-sysroot=%{build_sysroot} \
%else
%if 0%{?sysroot:1}
	--with-build-sysroot=%{sysroot} \
%else
	--with-build-sysroot=%{_prefix}/%{gcc_target_arch} \
%endif
%endif
%if 0%{?canonical_target:1}
	--with-build-time-tools=/usr/%{canonical_target}-suse-linux%{?canonical_target_abi:%canonical_target_abi}/bin \
%endif
%if "%{TARGET_ARCH}" == "spu"
	--with-gxx-include-dir=%sysroot/include/c++/%{gcc_dir_version} \
	--with-newlib \
%endif
%endif
%if "%{TARGET_ARCH}" == "armv5tel"
	--with-arch=armv5te \
	--with-float=soft \
	--with-mode=arm \
	--with-abi=aapcs-linux \
	--disable-sjlj-exceptions \
%endif
%if "%{TARGET_ARCH}" == "armv6hl"
        --with-arch=armv6zk \
        --with-tune=arm1176jzf-s \
        --with-float=hard \
        --with-abi=aapcs-linux \
        --with-fpu=vfp \
        --disable-sjlj-exceptions \
%endif
%if "%{TARGET_ARCH}" == "armv7hl"
	--with-arch=armv7-a \
	--with-tune=cortex-a15 \
	--with-float=hard \
	--with-abi=aapcs-linux \
	--with-fpu=vfpv3-d16 \
	--disable-sjlj-exceptions \
%endif
%if "%{TARGET_ARCH}" == "aarch64"
	--enable-fix-cortex-a53-835769 \
	--enable-fix-cortex-a53-843419 \
%endif
%if "%{TARGET_ARCH}" == "powerpc" || "%{TARGET_ARCH}" == "powerpc64" || "%{TARGET_ARCH}" == "powerpc64le" 
%if "%{TARGET_ARCH}" == "powerpc"
        --with-cpu=default32 \
%endif
%if "%{TARGET_ARCH}" == "powerpc64le"
%if %{suse_version} == 1315
	--with-cpu=power8 \
	--with-tune=power8 \
%else
	--with-cpu=power7 \
	--with-tune=power7 \
%endif
%else
	--with-cpu-64=power4 \
%endif
	--enable-secureplt \
	--with-long-double-128 \
%if "%{TARGET_ARCH}" == "powerpc64le"
	--enable-targets=powerpcle-linux \
	--disable-multilib \
%endif
%endif
%if "%{TARGET_ARCH}" == "sparc64"
	--with-cpu=ultrasparc \
	--with-long-double-128 \
%endif
%if "%{TARGET_ARCH}" == "sparc"
	--with-cpu=v8 \
	--with-long-double-128 \
%endif
%if "%{TARGET_ARCH}" == "i586"
	--with-arch-32=i586 \
	--with-tune=generic \
%endif
%if "%{TARGET_ARCH}" == "x86_64"
	--with-arch-32=i586 \
	--with-tune=generic \
%endif
%if "%{TARGET_ARCH}" == "s390"
%if %{suse_version} >= 1310
        --with-tune=zEC12 --with-arch=z196 \
%else
        --with-tune=z9-109 --with-arch=z900 \
%endif
	--with-long-double-128 \
	--enable-decimal-float \
%endif
%if "%{TARGET_ARCH}" == "s390x"
%if %{suse_version} >= 1310
        --with-tune=zEC12 --with-arch=z196 \
%else
        --with-tune=z9-109 --with-arch=z900 \
%endif
	--with-long-double-128 \
	--enable-decimal-float \
%endif
%if "%{TARGET_ARCH}" == "m68k"
	--disable-multilib \
%endif
	--build=%{GCCDIST} \
	--host=%{GCCDIST}

%if 0%{?building_libffi:1}
make stage1-bubble $PARALLEL
make all-target-libffi $PARALLEL
%else
STAGE1_FLAGS="-g"
# Only run profiled bootstrap on archs where it works and matters
%ifarch x86_64 ppc64le s390x
make profiledbootstrap STAGE1_CFLAGS="$STAGE1_FLAGS" BOOT_CFLAGS="$RPM_OPT_FLAGS" $PARALLEL
%else
make STAGE1_CFLAGS="$STAGE1_FLAGS" BOOT_CFLAGS="$RPM_OPT_FLAGS" $PARALLEL
%endif
make info
%if 0%{?building_libjava:1}
make -C %{GCCDIST}/libstdc++-v3/doc doc-html-doxygen
%endif
%if 0%{?run_tests:1}
echo "Run testsuite"
(make -C %{GCCDIST}/libstdc++-v3 check-abi || true)
mv %{GCCDIST}/libstdc++-v3/testsuite/libstdc++.log %{GCCDIST}/libstdc++-v3/testsuite/libstdc++-abi.log
mv %{GCCDIST}/libstdc++-v3/testsuite/libstdc++.sum %{GCCDIST}/libstdc++-v3/testsuite/libstdc++-abi.sum
# asan needs a whole shadow address space
ulimit -v unlimited || true
make -k check $PARALLEL || true
mkdir ../testresults
../contrib/test_summary | tee ../testresults/test_summary.txt
%endif
%endif

%install
export NO_BRP_CHECK_BYTECODE_VERSION=true
cd obj-%{GCCDIST}
# Work around tail/head -1 changes
export _POSIX2_VERSION=199209
export LIBRARY_PATH=$RPM_BUILD_ROOT%{libsubdir}:$RPM_BUILD_ROOT%{mainlibdirbi}
%if 0%{?building_libffi:1}
make -C %{GCCDIST}/libffi install DESTDIR=$RPM_BUILD_ROOT
%else
%if 0%{?building_libjava:1}
make -C %{GCCDIST}/libjava install DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-man DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-common DESTDIR=$RPM_BUILD_ROOT
make -C gcc install-common DESTDIR=$RPM_BUILD_ROOT COMPILERS='jc1$(exeext) jvgenmain$(exeext)'
# copy the libstdc++ API reference
cp -r %{GCCDIST}/libstdc++-v3/doc/doxygen/html ../libstdc++-v3/doc/html/api
# install-common also installs collect2, gcov and the g++ and gfortran driver
%if %{build_cp}
rm $RPM_BUILD_ROOT%{_prefix}/bin/g++%{binsuffix}
%endif
%if %{build_fortran}
rm $RPM_BUILD_ROOT%{_prefix}/bin/gfortran%{binsuffix}
%endif
rm $RPM_BUILD_ROOT%{_prefix}/bin/gcov%{binsuffix}
rm $RPM_BUILD_ROOT%{libsubdir}/collect2
%else
make install DESTDIR=$RPM_BUILD_ROOT
%if %{build_java}
make -C gcc java.uninstall DESTDIR=$RPM_BUILD_ROOT
make -C gcc java.install-info DESTDIR=$RPM_BUILD_ROOT
rm $RPM_BUILD_ROOT%{_prefix}/bin/jcf-dump%{binsuffix}
rm $RPM_BUILD_ROOT%{_mandir}/man1/jcf-dump%{binsuffix}.1
rm $RPM_BUILD_ROOT%{libsubdir}/jc1
rm $RPM_BUILD_ROOT%{libsubdir}/jvgenmain
%endif
%endif
%endif

# Remove libffi installed files if we did not want to build it
%if !0%{?building_libffi:1}
rm -f $RPM_BUILD_ROOT%{mainlibdir}/libffi.*
%if %{biarch}
  rm -f $RPM_BUILD_ROOT%{mainlibdirbi}/libffi.*
%endif
rm -f $RPM_BUILD_ROOT%{libsubdir}/include/ffi.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include/ffitarget.h
rm -f $RPM_BUILD_ROOT%{_mandir}/man3/ffi%{binsuffix}.3*
rm -f $RPM_BUILD_ROOT%{_mandir}/man3/ffi_call%{binsuffix}.3*
rm -f $RPM_BUILD_ROOT%{_mandir}/man3/ffi_prep_cif%{binsuffix}.3*
rm -f $RPM_BUILD_ROOT%{_mandir}/man3/ffi_prep_cif_var%{binsuffix}.3*
%endif

# Remove some useless .la files
for lib in libobjc libgfortran libgfortranbegin libquadmath libcaf_single \
    libmudflap libmudflapth libgomp libstdc++ libsupc++ libgcj-tools libgij \
    libasan libatomic libitm libtsan; do
  rm -f $RPM_BUILD_ROOT%{versmainlibdir}/$lib.la
%if %{biarch}
  rm -f $RPM_BUILD_ROOT%{versmainlibdirbi}/$lib.la
%endif
done

mkdir -p $RPM_BUILD_ROOT%{_libdir}
%if %{biarch}
%if %{build_primary_64bit}
mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
%else
mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib64
%endif
%endif

# move shared libs from versionspecific dir to main libdir
for libname in \
%if 0%{?building_libjava:1}
  libgcj libgij libgcj-tools \
%else
%if %{build_fortran}
  libgfortran \
%ifarch %quadmath_arch
  libquadmath \
%endif
%endif
%if %{build_objc}
  libobjc \
%endif
%if %{build_cp}
  libstdc++ \
%endif
  libgomp \
%ifarch %atomic_arch
  libatomic \
%endif
%ifarch %itm_arch
  libitm \
%endif
%ifarch %asan_arch
  libasan \
%endif
%ifarch %tsan_arch
  libtsan \
%endif
%if %{build_with_mudflap}
  libmudflap libmudflapth \
%endif
%endif
    ; do
  for lib in `find $RPM_BUILD_ROOT%{versmainlibdir} -maxdepth 1 -name $libname.so.*`; do
    mv $lib $RPM_BUILD_ROOT%{mainlibdir}/
  done
  ln -sf %{mainlibdir}/`readlink $RPM_BUILD_ROOT%{versmainlibdir}/$libname.so | sed -e 's/$.*\.so\.[^\.]*$.*/\1/'`  \
         $RPM_BUILD_ROOT%{versmainlibdir}/$libname.so
%if %{biarch}
  if test -d $RPM_BUILD_ROOT%{versmainlibdirbi}; then
    for lib in `find $RPM_BUILD_ROOT%{versmainlibdirbi} -maxdepth 1 -name "$libname.so.*"`; do
      mv $lib $RPM_BUILD_ROOT%{mainlibdirbi}/
    done
    ln -sf %{mainlibdirbi}/`readlink $RPM_BUILD_ROOT%{versmainlibdirbi}/$libname.so | sed -e 's/$.*\.so\.[^\.]*$.*/\1/'`  \
         $RPM_BUILD_ROOT%{versmainlibdirbi}/$libname.so
  fi
%endif
done
# FIXME, tsan is not multilib
%ifarch %tsan_arch
%if %{biarch}
rm -f $RPM_BUILD_ROOT%{versmainlibdirbi}/libtsan.so
%endif
%endif
%if %{build_cp}
%if !0%{?building_libjava:1}
# And we want to move the shlib gdb pretty printers to a more sane
# place so ldconfig does not complain
mkdir -p $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdir}
mv $RPM_BUILD_ROOT%{mainlibdir}/libstdc++.so.*-gdb.py $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdir}/
sed -i -e '/^libdir/s/\/gcc\/%{GCCDIST}\/%{gcc_dir_version}//g' $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdir}/libstdc++.so.*-gdb.py
%if %{biarch}
  if test -d $RPM_BUILD_ROOT%{versmainlibdirbi}; then
    mkdir -p $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdirbi}
    mv $RPM_BUILD_ROOT%{mainlibdirbi}/libstdc++.so.*-gdb.py $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdirbi}/
    sed -i -e '/^libdir/s/\/gcc\/%{GCCDIST}\/%{gcc_dir_version}//g' $RPM_BUILD_ROOT%{_datadir}/gdb/auto-load%{mainlibdirbi}/libstdc++.so.*-gdb.py
  fi
%endif
%endif
%endif
%if 0%{?building_libjava:1}
# libgcj_bc is special as the .so file is actually a different
# library as the library refered to by the SONAME which should
# be a simple link to our libgcj.
for lib in `find $RPM_BUILD_ROOT%{versmainlibdir} -maxdepth 1 -name libgcj_bc.so.*`; do
  rm $lib
done
ln -s libgcj.so.%{libgcj_sover} $RPM_BUILD_ROOT%{mainlibdir}/libgcj_bc.so.%{libgcj_bc_sover}
%if %{biarch_libjava}
for lib in `find $RPM_BUILD_ROOT%{versmainlibdirbi} -maxdepth 1 -name libgcj_bc.so.*`; do
  rm $lib
done
ln -s libgcj.so.%{libgcj_sover} $RPM_BUILD_ROOT%{mainlibdirbi}/libgcj_bc.so.%{libgcj_bc_sover}
%endif
%endif

%if %{build_ada}
mv $RPM_BUILD_ROOT%{libsubdir}/adalib/lib*-*.so $RPM_BUILD_ROOT%{_libdir}
ln -sf %{_libdir}/libgnarl%{binsuffix}.so $RPM_BUILD_ROOT%{libsubdir}/adalib/libgnarl.so
ln -sf %{_libdir}/libgnat%{binsuffix}.so $RPM_BUILD_ROOT%{libsubdir}/adalib/libgnat.so
chmod a+x $RPM_BUILD_ROOT%{_libdir}/libgna*-*.so
%if %{biarch}
mv $RPM_BUILD_ROOT%{versmainlibdirbi}/adalib/lib*-*.so $RPM_BUILD_ROOT%{mainlibdirbi}/
ln -sf %{mainlibdirbi}/libgnarl%{binsuffix}.so $RPM_BUILD_ROOT%{versmainlibdirbi}/adalib/libgnarl.so
ln -sf %{mainlibdirbi}/libgnat%{binsuffix}.so $RPM_BUILD_ROOT%{versmainlibdirbi}/adalib/libgnarl.so
chmod a+x $RPM_BUILD_ROOT%{mainlibdirbi}/libgna*-*.so
%endif
%endif

rm -f $RPM_BUILD_ROOT%{_prefix}/bin/c++%{binsuffix}

# Remove some crap from the .la files:
for l in `find $RPM_BUILD_ROOT -name '*.la'`; do
  echo "changing $l"
# -e '/^dependency_libs/s|%{libsubdir}/$[^.]*$\.la |%{_libdir}/\1\.la |g'
  sed -e '/^dependency_libs/s| -L%{_builddir}/[^ ]*||g' \
      -e '/^dependency_libs/s| -L/usr/%{GCCDIST}/bin||g' \
      -e '/^dependency_libs/s|-lm $-lm $*|-lm |' \
      -e '/^dependency_libs/s|-L[^ ]* ||g' \
%if %{biarch}
%if %{build_primary_64bit}
      -e '/^libdir/s|%{_libdir}/32|%{_prefix}/lib|' \
      -e '/^libdir/s|lib64/\.\./||' \
%else
      -e '/^libdir/s|%{_libdir}/64|%{_prefix}/lib64|' \
%endif
%endif
      < $l  > $l.new
  mv $l.new $l
done

%if 0%{?run_tests:1} 
cp `find . -name "*.sum"` ../testresults/
cp `find . -name "*.log"  \! -name "config.log" | grep -v 'acats.\?/tests' ` ../testresults/
chmod 644 ../testresults/*
%endif
%if %{build_cp}
# Find C++ and Java headers
find $RPM_BUILD_ROOT%{_prefix}/include/c++ \
  -regex ".*/$org\|gcj\|gnu\|java\|javax$" -prune \
  -o $ -type d -printf "%%%%dir " , \
        -printf "%{_prefix}/include/c++/%%P\n" $ > ../c++-headers
%endif
# Remove files that we do not need to clean up filelist
rm -f $RPM_BUILD_ROOT%{_prefix}/bin/%{GCCDIST}-*
rm -rf $RPM_BUILD_ROOT%{libsubdir}/install-tools
#rm -rf $RPM_BUILD_ROOT%{_libdir}/pkgconfig/libgcj%{binsuffix}.pc
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/zutil.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/linux/a.out.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/asm-generic/socket.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/bits/mathdef.h
rm -f $RPM_BUILD_ROOT%{libsubdir}/include-fixed/sys/ucontext.h
# no plugins
rm -rf $RPM_BUILD_ROOT%{libsubdir}/plugin
rm -f  $RPM_BUILD_ROOT%{_infodir}/dir
rm -f  $RPM_BUILD_ROOT%{_prefix}/bin/gccbug%{binsuffix}

%if !0%{?building_libjava:1}%{?building_libffi:1}
# delete compile flag tracking from crt files
crt_list=$RPM_BUILD_ROOT%{versmainlibdir}/crt*.o
%if %{biarch}
%if %{build_primary_64bit}
crt32_list=$RPM_BUILD_ROOT%{versmainlibdirbi32}/crt*.o
%else
crt64_list=$RPM_BUILD_ROOT%{versmainlibdirbi64}/crt*.o
%endif
%endif
for o in $crt_list $crt32_list $crt64_list; do
  objcopy -R ".comment.SUSE.OPTs" $o
done
%endif

%if 0%{?building_libjava:1}
# gcj -static doesn't work properly anyway, unless using --whole-archive
# let's save the space instead.
find $RPM_BUILD_ROOT -name libgcj.a \
	-o -name libgcj-tools.a \
	-o -name libgij.a \
	-o -name libjvm.a \
	-o -name libgcj_bc.a \
  | xargs rm -f

find $RPM_BUILD_ROOT -name libgcj.spec | xargs \
  sed -i -e 's/lib: /&%%{static:%%eJava programs cannot be linked statically}/'

# security files have broken install locations, also they cause conflicts
# between libgcj versions.  Simply delete them here, libgcj will use its
# defaults in this case (which is what these files contain anyway).
rm $RPM_BUILD_ROOT%{_libdir}/logging.properties
rm -r $RPM_BUILD_ROOT%{_libdir}/security
%endif

%if 0%{?building_libffi:1}
# Move libffi headers, remove empty libffi libtool file
mkdir -p $RPM_BUILD_ROOT%{_prefix}/include
mv $RPM_BUILD_ROOT%{libsubdir}/include/ffitarget.h $RPM_BUILD_ROOT%{_prefix}/include/
mv $RPM_BUILD_ROOT%{libsubdir}/include/ffi.h $RPM_BUILD_ROOT%{_prefix}/include/
rm -f $RPM_BUILD_ROOT%{mainlibdir}/libffi.la
%if %{biarch}
rm -f $RPM_BUILD_ROOT%{mainlibdirbi}/libffi.la
%endif
# Generate a simple pkg-config file
mkdir -p $RPM_BUILD_ROOT%{_libdir}/pkgconfig
echo -e 'Name: libffi\nVersion: 3.0.11\nDescription: libffi\nLibs: -lffi' > $RPM_BUILD_ROOT%{_libdir}/pkgconfig/libffi.pc
%endif

%if %{build_java}
%if !%{build_libjava}
rm $RPM_BUILD_ROOT%{_mandir}/man1/jv-convert%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gcj-dbtool%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gij%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/grmic%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/gc-analyze%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/aot-compile%{binsuffix}.1
rm $RPM_BUILD_ROOT%{_mandir}/man1/rebuild-gcj-db%{binsuffix}.1
%endif
rm -f $RPM_BUILD_ROOT%{_datadir}/gcc%{binsuffix}/python/libjava/aotcompile.py
rm -f $RPM_BUILD_ROOT%{_datadir}/gcc%{binsuffix}/python/libjava/classfile.py
%endif
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/fsf-funding.7
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/gfdl.7
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/gpl.7
rm -f $RPM_BUILD_ROOT%{_libdir}/libiberty.a
%if %{biarch}
%if %{build_primary_64bit}
rm -f $RPM_BUILD_ROOT%{_prefix}/lib/libiberty.a
%else
rm -f $RPM_BUILD_ROOT%{_prefix}/lib64/libiberty.a
%endif
%endif
rm -f $RPM_BUILD_ROOT%{libsubdir}/liblto_plugin.a
rm -f $RPM_BUILD_ROOT%{libsubdir}/liblto_plugin.la

%if 0%{?building_libjava:1}
# For building libjava only we need to delete other info docs
rm $RPM_BUILD_ROOT%{_infodir}/cp-tools.info*
# Remove stale manpages for binaries we do not build
rm $RPM_BUILD_ROOT%{_mandir}/man1/gjdoc%{binsuffix}.1
# For building the java frontend we need to copy the ecj jar
mkdir -p $RPM_BUILD_ROOT%{libsubdir}
cp $RPM_SOURCE_DIR/ecj.jar $RPM_BUILD_ROOT%{libsubdir}
%else
# For regular build, some info files do not get renamed properly.
# Do so here.
mv $RPM_BUILD_ROOT%{_infodir}/libgomp.info $RPM_BUILD_ROOT%{_infodir}/libgomp%{binsuffix}.info
%ifarch %itm_arch
mv $RPM_BUILD_ROOT%{_infodir}/libitm.info $RPM_BUILD_ROOT%{_infodir}/libitm%{binsuffix}.info
%endif
%if %{build_fortran} 
%ifarch %quadmath_arch
mv $RPM_BUILD_ROOT%{_infodir}/libquadmath.info $RPM_BUILD_ROOT%{_infodir}/libquadmath%{binsuffix}.info
%endif
%endif
%if %{build_ada}
mv $RPM_BUILD_ROOT%{_infodir}/gnat-style.info $RPM_BUILD_ROOT%{_infodir}/gnat-style%{binsuffix}.info
mv $RPM_BUILD_ROOT%{_infodir}/gnat_rm.info $RPM_BUILD_ROOT%{_infodir}/gnat_rm%{binsuffix}.info
mv $RPM_BUILD_ROOT%{_infodir}/gnat_ugn.info $RPM_BUILD_ROOT%{_infodir}/gnat_ugn%{binsuffix}.info
%endif
%endif

%if %{build_java}
%if 0%{?building_libjava:1}
%files -n gcc48-java
%defattr(-,root,root)
%{_prefix}/bin/gcj%{binsuffix}
%{_prefix}/bin/gcjh%{binsuffix}
%{_prefix}/bin/gcj-dbtool%{binsuffix}
%{_prefix}/bin/jcf-dump%{binsuffix}
%{_prefix}/bin/jv-convert%{binsuffix}
%{_prefix}/bin/gc-analyze%{binsuffix}
%{_prefix}/bin/aot-compile%{binsuffix}
%{_prefix}/bin/rebuild-gcj-db%{binsuffix}
%{libsubdir}/jc1
%{libsubdir}/jvgenmain
%{libsubdir}/ecj.jar
%{libsubdir}/ecj1
%doc %{_mandir}/man1/gcj%{binsuffix}.1.gz
%doc %{_mandir}/man1/gcjh%{binsuffix}.1.gz
%doc %{_mandir}/man1/gcj-dbtool%{binsuffix}.1.gz
%doc %{_mandir}/man1/jcf-dump%{binsuffix}.1.gz
%doc %{_mandir}/man1/jv-convert%{binsuffix}.1.gz
%doc %{_mandir}/man1/gc-analyze%{binsuffix}.1.gz
%doc %{_mandir}/man1/aot-compile%{binsuffix}.1.gz
%doc %{_mandir}/man1/rebuild-gcj-db%{binsuffix}.1.gz
%endif
%endif

%if %{build_java}
%if %{build_libjava}
%files 
%defattr(-,root,root)
%dir %{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}
%dir %{_libdir}/gcc
%dir %{_libdir}/gcc/%{GCCDIST}
%dir %{libsubdir}
%{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}/classmap.db
# We usually do not multilib libjava
%if %{biarch_libjava}
%versbiarchlib libgcj.la
%biarchlib libgcj.so.*
%biarchlib libgij.so.*
%biarchlib libgcj-tools.so.*
%else
%versmainlib libgcj.la
%mainlib libgcj.so.*
%mainlib libgij.so.*
%mainlib libgcj-tools.so.*
%endif
%{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}/libjvm.la
%{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}/libjvm.so
%{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}/libjavamath.la
%{_libdir}/gcj-%{gcc_dir_version}-%{libgcj_sover}/libjavamath.so

%files -n libgcj_bc%{libgcj_bc_sover}%{libgcj_bc_suffix}
%defattr(-,root,root)
%if %{biarch_libjava}
%biarchlib libgcj_bc.so.%{libgcj_bc_sover}*
%else
%mainlib libgcj_bc.so.%{libgcj_bc_sover}*
%endif

%files -n libgcj48-jar
%defattr(-,root,root)
%{_prefix}/share/java/libgcj-%{gcc_dir_version}.jar
%{_prefix}/share/java/libgcj-tools-%{gcc_dir_version}.jar

%files -n libgcj48-devel
%defattr(-,root,root)
%dir %{_prefix}/include/c++
%dir %{libsubdir}
%dir %{libsubdir}/include
%dir %{gxxinclude}
%{_libdir}/pkgconfig/libgcj%{binsuffix}.pc
%{libsubdir}/include/jawt.h
%{libsubdir}/include/jawt_md.h
%{libsubdir}/include/jni.h
%{libsubdir}/include/jni_md.h
%{libsubdir}/include/jvmpi.h
%{gxxinclude}/gnu
%{gxxinclude}/gcj
%{gxxinclude}/java
%{gxxinclude}/javax
%{gxxinclude}/org
%{gxxinclude}/sun
%{libsubdir}/include/gcj
%if %{biarch_libjava}
%versbiarchlib libgcj.so
%versbiarchlib libgcj.spec
%versbiarchlib libgcj-tools.so
%versbiarchlib libgij.so
%versbiarchlib libgcj_bc.so
%else
%versmainlib libgcj.so
%versmainlib libgcj.spec
%versmainlib libgcj-tools.so
%versmainlib libgij.so
%versmainlib libgcj_bc.so
%endif

%files -n gcc48-gij
%defattr(-,root,root)
%{_prefix}/bin/gij%{binsuffix}
%{_prefix}/bin/gappletviewer%{binsuffix}
%{_prefix}/bin/gjar%{binsuffix}
%{_prefix}/bin/gjarsigner%{binsuffix}
%{_prefix}/bin/gjavah%{binsuffix}
%{_prefix}/bin/gkeytool%{binsuffix}
%{_prefix}/bin/gnative2ascii%{binsuffix}
%{_prefix}/bin/gorbd%{binsuffix}
%{_prefix}/bin/grmic%{binsuffix}
%{_prefix}/bin/grmid%{binsuffix}
%{_prefix}/bin/grmiregistry%{binsuffix}
%{_prefix}/bin/gserialver%{binsuffix}
%{_prefix}/bin/gtnameserv%{binsuffix}
%doc %{_mandir}/man1/gij%{binsuffix}.1.gz
%doc %{_mandir}/man1/gappletviewer%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmic%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmid%{binsuffix}.1.gz
%doc %{_mandir}/man1/grmiregistry%{binsuffix}.1.gz
%doc %{_mandir}/man1/gkeytool%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjar%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjarsigner%{binsuffix}.1.gz
%doc %{_mandir}/man1/gjavah%{binsuffix}.1.gz
%doc %{_mandir}/man1/gnative2ascii%{binsuffix}.1.gz
%doc %{_mandir}/man1/gorbd%{binsuffix}.1.gz
%doc %{_mandir}/man1/gserialver%{binsuffix}.1.gz
%doc %{_mandir}/man1/gtnameserv%{binsuffix}.1.gz
%endif
%endif

%if 0%{?building_libjava:1}
%files -n libstdc++48-doc
%defattr(-,root,root)
%doc libstdc++-v3/doc/html
%endif

%if %{build_java}
%if 0%{?building_libffi:1}
%files -n libffi%{libffi_sover}%{libffi_suffix}
%defattr(-,root,root)
%mainlib libffi.so.%{libffi_sover}*

%if %{separate_biarch}
%files -n libffi%{libffi_sover}%{libffi_suffix}%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libffi.so.%{libffi_sover}*
%endif

%post -n libffi48-devel
%install_info --info-dir=%{_infodir} %{_infodir}/libffi%{binsuffix}.info.gz
%postun -n libffi48-devel
%install_info_delete --info-dir=%{_infodir} %{_infodir}/libffi%{binsuffix}.info.gz

%files -n libffi48-devel
%defattr(-,root,root)
%{_prefix}/include/ffi.h
%{_prefix}/include/ffitarget.h
%mainlib libffi.so
%mainlib libffi.a
%{_libdir}/pkgconfig/libffi.pc
%doc %{_infodir}/libffi%{binsuffix}.info.gz
%doc %{_mandir}/man3/ffi%{binsuffix}.3.gz
%doc %{_mandir}/man3/ffi_call%{binsuffix}.3.gz
%doc %{_mandir}/man3/ffi_prep_cif%{binsuffix}.3.gz
%doc %{_mandir}/man3/ffi_prep_cif_var%{binsuffix}.3.gz

%if %{separate_biarch}
%files -n libffi48-devel%{separate_biarch_suffix}
%defattr(-,root,root)
%biarchlib libffi.so
%biarchlib libffi.a
%endif
%endif
%endif

%if 0%{?run_tests:1}
%files -n gcc48-testresults
%defattr(-,root,root)
%doc testresults/test_summary.txt
%doc testresults/*.sum
%doc testresults/*.log
%endif

%changelog

Places

File libgcj48.spec of Package libffi48.10984

Places