Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP3:Update
multipath-tools.4345
multipath-tools.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File multipath-tools.changes of Package multipath-tools.4345
------------------------------------------------------------------- Wed Jun 7 06:46:24 UTC 2017 - mwilck@suse.com - spec file: re-added multipath.conf (bsc#1039045, bsc#1030314, bsc#1032487, bsc#1037299) * added /usr/lib/modules-load.d/multipath.conf ------------------------------------------------------------------- Tue Jun 6 18:47:29 UTC 2017 - mwilck@suse.com - added /usr/lib/dracut/dracut.conf.d/50-multipath-tools.conf (bsc#1039045, bsc#1030314, bsc#1032487, bsc#1037299) * removed /usr/lib/modules-load.d/multipath.conf from previous version again. The dracut.conf.d approach is more robust because it doesn't depend on a dracut update. ------------------------------------------------------------------- Mon May 22 21:13:54 UTC 2017 - mwilck@suse.com - added /usr/lib/modules-load.d/multipath.conf (bsc#1039045, bsc#1030314, bsc#1032487, bsc#1037299) - multipath-tools.spec: cleanups from OBS ------------------------------------------------------------------- Fri Apr 14 10:36:16 CEST 2017 - hare@suse.de - kpartx: Fixup sanitize delete partitions (bsc#1033541) - multipathd: fixup check for new path states (bsc#1019798) - libmultipath: use existing alias from bindings file (bsc#1005255) ------------------------------------------------------------------- Tue Feb 7 11:05:28 CET 2017 - hare@suse.de - multipathd: fix memory corruption issue (bsc#1022996) ------------------------------------------------------------------- Fri Feb 3 11:31:17 CET 2017 - hare@suse.de - kpartx: sanitize delete partitions (bsc#1008691) - kpartx: Fix check whether to detach loop device ------------------------------------------------------------------- Wed Jan 11 18:24:26 UTC 2017 - mwilck@suse.com - multipathd: issue systemd READY after initial configuration (bsc#1006469, bsc#1006118) ------------------------------------------------------------------- Tue Jan 10 19:38:51 UTC 2017 - mwilck@suse.com - multipathd.service: re-add Before: lvm2-activation-early.service (bsc#1019181) ------------------------------------------------------------------- Mon Jan 9 09:31:41 UTC 2017 - mwilck@suse.com - multipath-tools: fix dm- device filtering (bsc#1017009) ------------------------------------------------------------------- Wed Oct 19 13:58:41 CEST 2016 - hare@suse.de - libmultipath/configure: do not load invalid maps (bsc#1005546) - libmultipath/discovery: calculate priority even for ghost paths (bsc#1005546) ------------------------------------------------------------------- Wed Oct 19 13:37:27 CEST 2016 - mwilck@suse.de - multipathd: skip conf==NULL check in socket listener thread (bsc#1005414) - multipath -ll: set DI_SERIAL (bsc#991432) - libmultipath: fall back to search paths by devt (bsc#1003972) - libmultipath/discovery: calculate priority even for ghost paths (bsc#1005546) - libmultipath/configure: do not load invalid maps (bsc#1005546) ------------------------------------------------------------------- Wed Sep 28 12:03:30 UTC 2016 - mwilck@suse.de - Backported find_multipaths support to SLES12-SP1 (bsc#999522) - multpath.conf(5): fix reassign_maps section - Add find_multipaths to multipath.conf man page - libmultipath: only add uninitialized paths in check_path - add find_multipaths option ------------------------------------------------------------------- Wed Sep 28 09:51:54 CEST 2016 - mwilck@suse.de - _dm_flush_map: add "need_suspend" parameter (bsc#986838) - dm_flush_map: remove need_sync parameter - multipath: check partitions unused before removing (bsc#986838), backported from sles12-sp2 - libmultipath: refactor partmaps code - fix indentation problem in multipath.conf(5) ------------------------------------------------------------------- Wed Sep 21 23:41:00 CEST 2016 - mwilck@suse.de - backports from sles12-sp2 branch (bsc#984669) * multipathd: start daemon after udev trigger (bsc#986734) * multipath: fixup check from udev rules (bsc#986734) ------------------------------------------------------------------- Tue Sep 20 10:30:00 CEST 2016 - mwilck@suse.de - libmultipath: remove calls to dm_udev_complete (bsc#986838) ------------------------------------------------------------------- Tue Aug 9 12:33:39 CEST 2016 - hare@suse.de - multipathd: Add 'wwn' and 'serial' keyword to weightedpath prioritizer (bsc#991432) ------------------------------------------------------------------- Mon Jul 25 10:09:33 UTC 2016 - martin.wilck@suse.com - multipath.rules: update to deal with partition devices (bsc#979280) ------------------------------------------------------------------- Thu Jul 7 12:29:06 CEST 2016 - hare@suse.de - uxlsnr: avoid potential memory overflow allocating polls - libmultipath: correctly zero out cookie in dm_simplecmd - multipathd: enter IDLE mode before sleeping in checkerloop() - multipathd: avoid accessing configuration in IDLE - Revert 'multipathd: Do not update the paths vec when removing paths' (bsc#980933) - Fix systemd build requirements (bsc#983167) - multipathd: Rework cookie handling to match with upstream ------------------------------------------------------------------- Thu Mar 24 09:49:45 CET 2016 - hare@suse.de - multipathd: do not flush maps on startup - Use find_path_by_dev() where possible (bsc#924316) - Fixup error return in store_path() (bsc#972329) - Do not display message 'invalid fd' ------------------------------------------------------------------- Tue Mar 8 10:57:07 CET 2016 - hare@suse.de - Fixup overzealous warning 'empty device number' (bsc#969857) ------------------------------------------------------------------- Wed Feb 17 15:53:26 CET 2016 - hare@suse.de - multipathd: fixup signal handling (again) - Revert 'trigger all devices on startup' - multipathd: print error message for invalid arguments - multipathd: block checkerloop during reconfiguration (bsc#946658) - libmultipath: correctly initialize pp->sg_id - multipathd: don't buffer output with systemd (bsc#954726) - multipath.rules: Do not forward partition events (bsc#954726) - libmultipath: improve uxlsnr handling (bsc#954726) - multipathd: do not realloc memory in uxlsnr (bsc#954726) - libmultipath: call get_uid() for all paths (bsc#935312) - multipathd: Do not print misleading message 'not found in pathvec' - multipathd: Do not update the paths vec when removing paths - multipathd: Do not switch paths on empty multipath tables (bsc#956349) - libmultipath: remove 'get_info' argument for adopt_paths() - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316) - libmultipath: Do not store paths with empty dev_t (bsc#924316) - libmultipath: Do not store paths with empty device name (bsc#924316) - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588) - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845) - multipath: Reset alias if renaming fails (bsc#943157) ------------------------------------------------------------------- Fri Nov 6 13:35:22 CET 2015 - hare@suse.de - Fixes for md_monitor on zFCP (FATE#319070): * strict loop timings * multipathd: fixup a crash when invoking CLI commands * multipathd: implement 'show map $map format $format ------------------------------------------------------------------- Tue Aug 25 11:58:21 CEST 2015 - hare@suse.de - Fixup hang in 'multipath -f' (bsc#941954) ------------------------------------------------------------------- Mon Aug 3 11:48:54 CEST 2015 - hare@suse.de - Create package for SLE12-SP1. * Remove multipath-tools-0.5.0-sles12.diff.bz2 * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2 - kpartx: parse emulated DASD devices - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885) - multipathd: Accept zero-sized paths in ev_add_path - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282) - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282) - libmultipath: correctly display checker status ------------------------------------------------------------------- Wed Apr 8 11:00:43 CEST 2015 - hare@suse.de - Remove 'udev_sync' argument from dm_simplecmd (bsc#903001) - Ensure multipathd is started before systemd-udev-trigger ------------------------------------------------------------------- Tue Apr 7 10:18:24 CEST 2015 - hare@suse.de - Only import ID_FS_XXX variables if not set (bsc#909358) - Fixup regular expression for HP MSA 2040 (bsc#920189) ------------------------------------------------------------------- Wed Mar 18 12:53:32 CET 2015 - hare@suse.de - Add dependency on systemd-udevd.service (bsc#903001) - Use ALUA for HP 3PAR (bsc#922105) - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703) - Load all device handler modules on startup (bsc#908529) ------------------------------------------------------------------- Fri Mar 13 13:59:19 CET 2015 - hare@suse.de - libmultipath: make vpd page 0x80 optional (bsc#917963) - Add HP MSA 2040 to the hardware table (bsc#920189) - Revert 'Skip unhandled device types' (bsc#917701) ------------------------------------------------------------------- Thu Jan 29 13:02:08 CET 2015 - hare@suse.de - skip uninitialized devices during reconfiguration (bnc#908915) - memory overflow when printing help text (bnc#909742) ------------------------------------------------------------------- Tue Dec 16 11:54:47 CET 2014 - hare@suse.de - Do not automatically fall back to vpd uid generation - Improve vpd parsing - multipathd: trigger all devices on startup (bnc#901465) - Unset 'uid_attribute' on failure ------------------------------------------------------------------- Wed Dec 10 09:43:29 CET 2014 - hare@suse.de - libmultipath: Fall back to SG_IO if no UID could be assigned (bnc#908915) - Assign local priority for NAA VPD descriptor (bnc#907483) - libmultipath: finally fix dev_loss_tmo setting (bnc#889927) - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927) - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809) - kpartx: handle more than 256 loop devices (bnc#898427) - multipathd: fixup locking in uev_remove_map() (bnc#901891) - multipathd: use global variable for uxsock timeout (bnc#900758) - multipathd: remove unused variable in cli_reconfigure() - Add %service calls for multipathd.socket ------------------------------------------------------------------- Mon Sep 22 11:02:53 CEST 2014 - hare@suse.de - Really fix segfault in recv_packet (bnc#896678) - Allow empty revision during discovery (bnc#896864) ------------------------------------------------------------------- Wed Sep 17 14:04:47 CEST 2014 - hare@suse.de - Fix segfault in recv_packet (bnc#896678) ------------------------------------------------------------------- Wed Sep 3 12:23:01 CEST 2014 - hare@suse.de - Fixup segfault due to double unlock - Skip USB devices during discovery (bnc#865577) - Ignore devices when sysfs_get_tgt_nodename fails (bnc#865577) - Use sysfs attribute vpd_pg80 to read serial number ------------------------------------------------------------------- Wed Sep 3 08:27:29 CEST 2014 - hare@suse.de - Create rcmultipathd links (bnc#894513) - multipathd: fix segfault in checkerloop() (bnc#894513) - Use regenerate_posttrans rpm macros (bnc#892181) ------------------------------------------------------------------- Tue Sep 2 16:51:23 UTC 2014 - trenn@suse.de - Do not call mkinitrd in rpm macros directly, make use of %{?regenerate_initrd_posttrans} and %{?regenerate_initrd_post} instead to avoid rebuilding of initrd for each package that needs initrd recreation. Only update initrd once per install/update if needed ------------------------------------------------------------------- Fri Aug 29 12:00:49 CEST 2014 - hare@suse.de - Fixup segfault during uev_path_add() (bnc#892214) ------------------------------------------------------------------- Thu Aug 21 12:16:53 CEST 2014 - hare@suse.de - Revert to ACT_RELOAD in domap() if the map exists - multipathd: asynchronous configuration (bnc#891189) - multipathd: timeout CLI commands when waiting for lock (bnc#891189) - Remove dm_udev_XXX wrapper functions - uxlsnr: use typedef for trigger function - multipathd: lock cli client list - multipathd: Use standard lists for CLI handling ------------------------------------------------------------------- Tue Aug 19 12:33:19 CEST 2014 - hare@suse.de - Use strlen() when checking for valid wwid - kpartx: zero out cookie (bnc#890902) - multipathd: Check for empty wwid when processing events (bnc#892214) ------------------------------------------------------------------- Mon Aug 18 16:24:05 CEST 2014 - hare@suse.de - Fixup device-mapper cookie handling yet again (bnc#890902) - Allow zero-sized devices during configuration - multipathd: issue warning on CLI command timeout (bnc#891189) ------------------------------------------------------------------- Wed Aug 13 20:04:34 CEST 2014 - hare@suse.de - Do not remove paths without uevent (bnc#890998) ------------------------------------------------------------------- Tue Aug 12 10:47:21 CEST 2014 - hare@suse.de - Fixup structure misalignment in config.h (bnc#890747) - Do not print empty multipaths section - Fixup 'uxsock_timeout' handling - Reload map if reinstate failed (bnc#890854) ------------------------------------------------------------------- Mon Aug 11 17:03:25 CEST 2014 - hare@suse.de - Close memory leak in print_multipath_topology - Implement 'uxsock_timeout' keyword (bnc#890551) - Return error when receiving CLI packet (bnc#890551) - multipath: do not print state 'orphan' for option '-l' (bnc#890551) - Fix race conditions during uevent processing (bnc#890994) ------------------------------------------------------------------- Tue Aug 5 12:34:04 CEST 2014 - hare@suse.de - Skip unhandled device types (bnc#881125) - use 'uid_attribute' per default when generating WWID (bnc#881125) - Use a default dev_loss_tmo of 600 (bnc#889927) - Fixup device-mapper 'cookie' handling (bnc#886743) - Remove last argument from verify_paths() - Add paths with a size of '0' as 'ghost' paths - Remove sysfs_get_dev() - Use glibc 'major' and 'minor' macros - Whitespace cleanup in mpath_persist ------------------------------------------------------------------- Mon Jul 28 10:18:43 CEST 2014 - hare@suse.de - Fixup wrong check for errno in uevent_listen() (bnc#889165) - Terminate uevent listener on ppoll() error (bnc#889165) ------------------------------------------------------------------- Fri Jul 25 10:53:27 CEST 2014 - hare@suse.de - Patches from upstream: * enable gcc format-security check * Accept "*" as a valid regular expression * check info.exists to get valid value * Don't forget to reload table when both reload and rename is required * libmultipath: Simplify read_line() * libmultipath: Zero-terminate sysfs_attr_get_value() result * libmultipath: Print line number for which parsing failed * libmultipath: Accept "*" as a valid regular expression * multipath: Wrong sysfs attribute used for iSCSI settings (bnc#883808) - Check for valid DM_DEVICE_INFO before proceeding (bnc#888453) - Scalability fixes (bnc#880356): * Separate out uevent parsing functions * Use poll() when receiving uevents * multipathd: push down lock in checkerloop() * Allow specific CLI commands to run unlocked * Push down vector lock during uevent processing ------------------------------------------------------------------- Wed Jul 23 12:35:44 CEST 2014 - hare@suse.de - recovery_tmo for iSCSI sessions not updated (bnc#883808) - Only filter for udev property if uid_attribute is present - Read wwid from sysfs vpg_pg83 attribute - Update multipath.conf.5 to clarify wwid generation - kpartx: Fixup persistent name generation (bnc#887582) - Revert 'return PATH_DOWN for quiesced paths' - Do not treat 'transport-offline' paths as 'offline' (bnc#888378) ------------------------------------------------------------------- Wed Jul 9 11:46:23 CEST 2014 - hare@suse.de - multipath: Check for running daemon when called with '-u' (bnc#886154) ------------------------------------------------------------------- Fri Jul 4 09:14:11 CEST 2014 - hare@suse.de - multipath: use option '-i' when called from udev (bnc#885628) - multipath: add option '-i' to ignore wwids file (bnc#885628) - Update hwtable for EMC XtremIO (bnc#880510) - Remove unused variable 'aas' from alua prioritzer - Patches from upstream: * Add multipath.conf force_sync option * make prioritizers use checker_timeout, if set * Improve multipath.conf syntax checking * orphan paths on failed add * Add missing interactive commands to multipathd man page * Make multipathd orphan paths that were removed externally * allow users to add wwids to /etc/multipath/wwids with -a * change conf->dry_run to conf->cmd * Return the correct size buffer in set_value() * Fix memory issues in path reordering failure code paths ------------------------------------------------------------------- Tue Jun 24 09:45:57 CEST 2014 - hare@suse.de - Fixup race condition with udev (bnc#883878) - Cleanup foreground operation handling in multipathd - Fix some minor issues in path reordering code (bnc#870465) - Patches from upstream: * Use existing user friendly names if possible * kpartx: fix extended partition size for >512b sectors * Mismatch between allocation length and transfer length in rdac prio * Mismatch between allocation length and transfer length in emc_clariion prio. ------------------------------------------------------------------- Fri Jun 13 10:51:48 CEST 2014 - hare@suse.de - 11-dm-mpath.rules: Import blkid values if all paths are down (bnc#875233) - kpartx.rules: Skip kpartx for multipath events (bnc#875233) ------------------------------------------------------------------- Tue May 20 12:36:57 CEST 2014 - hare@suse.de - Fix race condition with systemd (bnc#878809) ------------------------------------------------------------------- Fri May 16 10:26:03 CEST 2014 - hare@suse.de - Fix segfault when fast_io_fail_tmo is empty in config file - Crafted ordering of child paths for round robin path selector (bnc#870465) - multipath: enable sync support (bnc#872297) - Whitelist devices in multipath.rules (bnc#877281) ------------------------------------------------------------------- Fri Apr 11 12:23:29 CEST 2014 - hare@suse.de - Install multipath rule under 56-multipath.rules (bnc#873151) - Implement option '-u' for uevents (bnc#873151) - Remove trailing linefeed from sysfs attributes - Make checker_put() and prio_put() idempotent - Implement 'list path' CLI command - Disable reassign maps per default - Allow for NULL path when printing information - Fixup wwid blacklist printing - Use SCSI_IDENT_.* as the default property whitelist (bnc#872929) - Do not call 'blkid' in kpartx.rules - Allow empty wwids during discovery (bnc#872712) - Always set verbosity to '0' when checking devices (bnc#867840) - Fixup multipath rules for booting (bnc#870764) - Fixup dependencies in multipathd.service (bnc#872712) - Do not print empty device strings during discovery (bnc#872712) - Use multipath wwid if path wwid is empty (bnc#872712) - Set the correct PID when running in debug mode ------------------------------------------------------------------- Fri Mar 21 12:28:10 CET 2014 - hare@suse.de - Fixup ordering cycle with systemd (bnc#863218) - Rebase git repository to match with upstream - Revert 'display uevent sequence number'; not required anymore ------------------------------------------------------------------- Thu Mar 13 00:56:11 CET 2014 - ro@suse.de - downgrade device-mapper requirement to 1.2.78 until 1.2.82 is available anywhere ------------------------------------------------------------------- Wed Mar 12 16:36:56 CET 2014 - hare@suse.de - Update FSF address - Add 11-dm-mpath.rules (bnc#867968) - Link against libsystemd instead of libsystemd-daemon ------------------------------------------------------------------- Fri Feb 28 15:53:24 CET 2014 - hare@suse.de - Fixup spec file to correct rules permissions ------------------------------------------------------------------- Fri Feb 28 12:45:19 CET 2014 - hare@suse.de - Fixup 40-multipath.rules installation ------------------------------------------------------------------- Wed Feb 26 14:38:49 CET 2014 - hare@suse.de - Add 40-multipath.rules for dracut support ------------------------------------------------------------------- Fri Feb 14 14:55:28 CET 2014 - hare@suse.de - Install kpartx rules with correct prefix for dracut - filter for missing property in get_refwwid() (bnc#862250) - Double uevent stacksize yet again (bnc#855379) - do not fail discovery on individual devices (bnc#860850) - Prefer deprecated 'getuid' callout (bnc#861534) - Skip paths with empty wwid (bnc#861534) - correctly terminate string in strlcpy() (bnc#861534) - Don't chop const strings - Fixup typo in Makefile - display uevent sequence number on 'show daemon' ------------------------------------------------------------------- Tue Jan 21 16:32:33 CET 2014 - hare@suse.de - Fixup build issues ------------------------------------------------------------------- Tue Jan 21 13:58:15 CET 2014 - hare@suse.de - Update to official version 0.5.0 - remove: multipath-tools-0.4.9.tar.bz2 - remove: multipath-tools-0.4.9-opensuse-12.3.diff.bz2 - add: multipath-tools-0.5.0.tar.bz2 - add: multipath-tools-0.5.0-sles12.diff.bz2 - Merge: - multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch ------------------------------------------------------------------- Tue Apr 16 10:08:18 UTC 2013 - idonmez@suse.com - Add Source URL, see https://en.opensuse.org/SourceUrls - use %setup -c to support the tarball ------------------------------------------------------------------- Fri Feb 15 13:55:24 UTC 2013 - cfarrell@suse.com - license update: GPL-2.0 Substantial number of GPL-2.0 files in the package ------------------------------------------------------------------- Fri Feb 15 12:15:09 UTC 2013 - rmilasan@suse.com - Make installation of systemd unit and udev files more flexible. add: multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch ------------------------------------------------------------------- Fri Feb 1 10:29:11 CET 2013 - hare@suse.de - Update to latest mainline git version - Merge systemd fixes - Generate persistent device names for kpartx (bnc#799274) ------------------------------------------------------------------- Sun Aug 26 02:05:37 UTC 2012 - crrodriguez@opensuse.org - Systemd: use default service type instead of forking - Systemd: fix spec pre/post scripts. ------------------------------------------------------------------- Tue Jul 17 13:21:47 UTC 2012 - rmilasan@suse.com - Drop patch 0001-multipath.rules.patch, multipath not ready yet. ------------------------------------------------------------------- Tue Jul 17 12:43:43 UTC 2012 - rmilasan@suse.com - Fix the installation of multipath.rules file. ------------------------------------------------------------------- Mon Jun 11 12:58:05 UTC 2012 - rmilasan@suse.com - Drop RUN+="socket:..." and update the multipath.rule like Fedora does. ------------------------------------------------------------------- Wed May 30 17:32:10 CEST 2012 - hare@suse.de - Update to version 0.4.9 - Merge in latest changes from mainline ------------------------------------------------------------------- Fri Apr 20 08:35:06 UTC 2012 - rmilasan@suse.com - Run update of initrd at %post and %postun. We need this to make sure initrd reflects the updates. ------------------------------------------------------------------- Fri Sep 30 15:40:21 UTC 2011 - uli@suse.com - cross-build fix: use %__cc macro ------------------------------------------------------------------- Fri May 27 09:34:36 UTC 2011 - lnussel@suse.de - don't hard require boot.device-mapper in boot.multipath. dm-mod is autoloaded when accessing /dev/mapper/control anyways. ------------------------------------------------------------------- Mon Apr 4 16:40:14 UTC 2011 - crrodriguez@opensuse.org - fix build fail with AS_NEEDED by default ------------------------------------------------------------------- Fri Nov 26 10:18:45 CET 2010 - meissner@suse.de - updated one more dm_simplecmd caller with &cookie. - bumped 1 character buffer to 1 byte more for leading \0 ------------------------------------------------------------------- Tue Jul 6 16:17:27 CEST 2010 - hare@suse.de - Merge with fixes from mainline. ------------------------------------------------------------------- Wed Jun 30 16:19:00 UTC 2010 - jengelh@medozas.de - fix compilation on bi-arch by specifying LIB=%_lib (Makefiles would erroneously assume a 64-bit target just by the sheer presence of lib64, which is wrong) - always add in -D_GNU_SOURCE to get at struct ucred ------------------------------------------------------------------- Wed Jun 23 15:09:46 CEST 2010 - hare@suse.de - Increase initial timeout for 'tur' checker (bnc#616694) ------------------------------------------------------------------- Fri Jun 18 13:19:13 CEST 2010 - hare@suse.de - Set geometry information for multipath maps (bnc#613363) - Reset 'running' parameter for directio (bnc#600043) - Add fallback to init script for older versions (bnc#602957) ------------------------------------------------------------------- Fri Jun 4 12:18:02 CEST 2010 - hare@suse.de - Add HP 2000 to internal hardware table (bnc#603359) - Make path state messages unique - Add 'reassign_maps' configuration parameter - Profiling fixes: * Update 'max_fds' handling * Use strcmp() instead of strcmp_chomp() * Simplify sysfs_get_device() * Remove duplicate calls to path_offline() * Simplify dm_get_name() * Fixup devt2devname() * Rework dm_reassign() - check argument length in execute_program(bnc#610914) - Do not use LOG_CONS when opening syslog (bnc#610914) - Remove pid file usage from init scripts (bnc#600412) - Fixup boot.multipath init script (bnc#600412) ------------------------------------------------------------------- Wed May 12 08:08:47 CEST 2010 - hare@suse.de - Always provide symlinks for udev (bnc#603785) ------------------------------------------------------------------- Thu May 6 14:02:11 CEST 2010 - hare@suse.de - Use minor number in ev_remove_map() (bnc#599770) - signal_waiter() overwrites structure (bnc#591399) - Serialize startup on large machines (bnc#598697) - Update multipath(8) manpage for '-p' (bnc#602970) - Mark 'readsector0' checker as deprecated (bnc#589340) ------------------------------------------------------------------- Mon Apr 26 13:33:30 CEST 2010 - hare@suse.de - Errorneous message 'error starting uevent listener' - Graceful shutdown of logging thread (bnc#591399) ------------------------------------------------------------------- Mon Apr 26 12:02:32 CEST 2010 - hare@suse.de - Missing '-p' option for mkdir in mkinitrd script (bnc#597786) - rdac message not printed correctly (bnc#598302) - Use alias when printing log messages (bnc#598302) - valgrind fixes (bnc#591399) - Use VECTOR_SIZE() defines - Update hwtable factorization - Use log_close() on shutdown - Use refcounting for checkers (bnc#591399) - More valgrind fixes ------------------------------------------------------------------- Tue Apr 20 13:41:07 CEST 2010 - hare@suse.de - Provide correct persistent symlinks for user_friendly_names (bnc#596301) - Fixup hardware table for LSI arrays (bnc#597713) - Reassign maps during startup (bnc#586834) - Update manpage ------------------------------------------------------------------- Tue Apr 20 12:51:53 CEST 2010 - mmarek@suse.cz - Use mkdir -p in mkinitrd setup script (bnc#597786). ------------------------------------------------------------------- Fri Apr 9 15:30:55 CEST 2010 - hare@suse.de - Remove 'minor' argument from add_map_without_path - Check for correct device-mapper device in uevent handler - Start uevent service handler from main thread - Do not reassign multipath maps (bnc#594341) - Protect waiter structure by mutex (bnc#581200) - Log directly to syslog on shutdown (bnc#581200) - Clear up uevent queue on shutdown - Add more IBM/FAStT arrays (bnc#578738) ------------------------------------------------------------------- Mon Mar 29 16:35:15 CEST 2010 - hare@suse.de - Display average priority as group priority (bnc#588591) - Implement 'wait event' cli command (bnc#586834) - Reset existing maps (bnc#577894) ------------------------------------------------------------------- Mon Mar 15 13:54:56 CET 2010 - hare@suse.de - Setup 'checkint' when loading config file (bnc#586847) ------------------------------------------------------------------- Wed Mar 10 11:20:56 CET 2010 - hare@suse.de - Fix typo in persistent rules for by-label/by-uuid - Update debug string in verify_paths() - Evaluate feature setting in verify_paths() (bnc#584197) ------------------------------------------------------------------- Fri Mar 5 09:34:37 CET 2010 - hare@suse.de - Fixup 'async_timeout' initialization again (bnc#580413) ------------------------------------------------------------------- Fri Feb 26 12:37:10 UTC 2010 - coolo@novell.com - fix buffer overflow in strncat ------------------------------------------------------------------- Mon Feb 22 10:08:44 CET 2010 - hare@suse.de - 'reset log' cli command crashes daemon (bnc#577889) - Initialize 'async_timeout' variable correctly (bnc#580413) ------------------------------------------------------------------- Thu Feb 4 11:28:36 CET 2010 - hare@suse.de - Add hardware defaults for EMC Invista (bnc#573870) - Use '--replace-whitespace' for scsi_id (bnc#572209) - Asynchronous mode for tur checker (bnc#552688) - Update queue_if_no_path after sync with kernel state (bnc#570932) - Add 'max_polling_interval' config variable (bnc#570932) - Add 'async_timeout' configuration variable (bnc#570932) - Use default scsi_id callout for EMC Symmetrix (bnc#528481) - Update path_offline() to return device status - Update filename in init script - Fixes from upstream: * do not allow 0 size for multipath devices * Add nexenta comstart hardware defaults * Add checks for conf->xxx * Add %z wildcard to display path serial * don't pretend config file has setup parameters * documentation fixes ------------------------------------------------------------------- Mon Jan 25 14:44:43 CET 2010 - hare@suse.de - Fixup kpartx initrd script to handle loop devices (bnc#523749) - Switch off 'queue_if_no_path' before removing maps (bnc#475523) - Update logical partition handling (bnc#551827) ------------------------------------------------------------------- Fri Jan 22 16:19:17 CET 2010 - hare@suse.de - Fix mkinitrd scripts for 64bit (bnc572143) - Remove logical partitions maps with 'multipath -f' ------------------------------------------------------------------- Fri Jan 22 14:30:36 CET 2010 - ro@suse.de - testing for existence of /lib64 is not sufficient to find out if we are building for a lib64 platform ------------------------------------------------------------------- Mon Jan 11 15:10:18 CET 2010 - hare@suse.de - Update dev_loss_tmo for no_path_retry (bnc#492469) ------------------------------------------------------------------- Tue Nov 17 16:36:19 CET 2009 - hare@suse.de - Merge in changes from OpenSUSE 11.2 - Update 'no_path_retry' correctly for failed paths (bnc#534666) - Update no_path_retry setting when evaluating features (bnc#542145) - directio: block count calculation wrong (bnc#549028) - multipath segfaults if configuration file contains errors (bnc#540118) ------------------------------------------------------------------- Thu Oct 22 16:29:35 CEST 2009 - hare@suse.de - Make 'param' local (bnc#548708) - Include multipath-fix.patch in git tree. ------------------------------------------------------------------- Mon Sep 28 15:34:02 CEST 2009 - hare@suse.de - Fixup strip whitespaces from getuid output (bnc#542085) - Change prefix for DASD devices to 'ccw' - Update no_path_retry setting when evaluating features (bnc#542145) ------------------------------------------------------------------- Wed Sep 16 12:54:03 CEST 2009 - hare@suse.de - Update features when queue_if_no_path is set (bnc#511607) - Ignore error messages when multipathd is not started - Add debugging output for feature changes - Add generic LSI/Engenio controller (bnc#508030) - Update 'no_path_retry' correctly for failed paths (bnc#534666) - TUR checker should not return 'failed' for reservation conflict (bnc#498413) ------------------------------------------------------------------- Tue Sep 8 20:56:53 UTC 2009 - aj@suse.de - Fix last patch, one caller of dm_simplecmd was not updated (multipath-fix.patch). ------------------------------------------------------------------- Fri Aug 21 15:49:47 CEST 2009 - hare@suse.de - Update to latest upstream git version - Merge in SLES11 fixes - Build package from git tree - Implement '-u' option for kpartx (bnc#517442) ------------------------------------------------------------------- Mon Jul 13 12:24:34 CEST 2009 - hare@suse.de - Check for errors in pthread_create() - Lock vectors during shutdown - Cleanup various MALLOC/REALLOC callers - Fix multipathd crash on shutdown - Do not run kpartx on dm-uevent messages (bnc#473352) - Set pthread stacksize correctly (bnc#485287) - Add STK arrays to internal hardware table (bnc#503855) - Correct persistent symlink for cciss (bnc#497997) - Backport some fixes from upstream (bnc#445023) - Add 'reset log' cli command - no_path_retry <N> causes I/O to fail (bnc#485281) - Terminate uevent service queue - Wait for daemon to shutdown (bnc#481389) - Update cli request processing - Safe memory allocation in cli_handlers - Use 'LOG_CONS' option for openlog() - Remove sysfs attribute cache - Add 'shutdown' cli command - Display FC error messages correctly - Wait for devices in init script (bnc#487586) - Always synchronize with dm state (bnc#447887) - Add 'aas' path prioritizer (bnc#472069) - Synchronize daemon startup with init file (bnc#481389) - Merge feature string in assemble_map (bnc#507793) ------------------------------------------------------------------- Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com - disable as-needed for this package as it fails to build with it ------------------------------------------------------------------- Fri Mar 20 10:43:12 CET 2009 - hare@suse.de - Reset checker message for blocked checkers - Increase priority for EMC Clariion arrays (bnc#484529) - Start waiter threads for single paths correctly (bnc#473841) - Use pthread_sigmask in alias.c when called from daemon. ------------------------------------------------------------------- Thu Mar 19 12:09:03 CET 2009 - hare@suse.de - Add %pre and %post scripts to stop multipathd during update - Don't set FC parameter on non-SCSI devices - multipath -t crashes with invalid configuration file ------------------------------------------------------------------- Fri Mar 13 14:21:05 CET 2009 - hare@suse.de - Don't remove partition mappings on stop (bnc#468826) - Set stacksize for log thread - Terminate all I/O before flushing maps (bnc#475523) - Select 'features' keyword from multipath setting (bnc#465009) ------------------------------------------------------------------- Tue Mar 10 12:46:36 CET 2009 - hare@suse.de - Use lists for uevent processing (bnc#478874) - Set stacksize of uevent handling thread (bnc#478874) - Increase uevent buffer size - Strip trailing blanks from wwid - Stack overflow in uev_trigger (bnc#476540) ------------------------------------------------------------------- Thu Feb 26 12:36:40 CET 2009 - hare@suse.de - Fixup multibus zero path handling (bnc#476330) - Update checker handling for blocked devices - Only pass block events to multipathd - Clean up uevent processing (bnc#478874) - Set stacksize correctly for event processing thread (bnc#478874) ------------------------------------------------------------------- Mon Feb 23 16:36:32 CET 2009 - hare@suse.de - Remove stray umask() call (bnc#458598) - Don't call kpartx if no paths are active (bnc#473352) ------------------------------------------------------------------- Thu Feb 19 16:26:32 CET 2009 - hare@suse.de - Multipathd dies immediately after startup (bnc#473029) - Return ghost state if port is in standby (bnc#475816) - Switch off queue_if_no_path before removing paths (bnc#475523) ------------------------------------------------------------------- Mon Feb 9 14:53:01 CET 2009 - hare@suse.de - Fix leastpending loadbalancer output (bnc#444199) - Start waitevent checker on new paths (bnc#473841) - Use 'noflush' for kpartx (bnc#473352) ------------------------------------------------------------------- Fri Feb 6 15:00:45 CET 2009 - hare@suse.de - Display multipath output for leastpending loadbalancer properly (bnc#444199) ------------------------------------------------------------------- Wed Feb 4 11:38:31 CET 2009 - hare@suse.de - Set queue_if_no_path setting during map reload (bnc#472253) - Remove obsolete 'umount map' uevent handling - Retry TUR on driver errors (bnc#456961) ------------------------------------------------------------------- Tue Feb 3 11:22:41 CET 2009 - hare@suse.de - Copy persistent bindings file into initramfs (bnc#468804) - Invert DM_STATE check for kpartx rules (bnc#440959) ------------------------------------------------------------------- Mon Feb 2 11:27:51 CET 2009 - hare@suse.de - Correct dbg_malloc() definition - Fix more memory leaks - Double free on path release (bnc#458393) ------------------------------------------------------------------- Mon Jan 26 14:17:57 CET 2009 - hare@suse.de - Don't access blocked devices in checkerloop() - Check for validity in VECTOR_XXX defines (bnc#469269,bnc#457465) ------------------------------------------------------------------- Fri Jan 23 14:15:18 CET 2009 - hare@suse.de - Update dev_loss_tmo handling (bnc#458393) - Fix directio error messages - Update sdev_state handling ------------------------------------------------------------------- Mon Jan 19 09:18:28 CET 2009 - hare@suse.de - Add new HP machines to hardware table (bnc#442133) - Print device-mapper tables for debugging - Properly quote variables in mkinitrd scripts (bnc#447966) - shuffle call to memarea_init - Add xdr_setsite in init scripts (bnc#459529) ------------------------------------------------------------------- Tue Jan 13 16:14:39 CET 2009 - hare@suse.de - Do not run checkers or prioritizers on blocked devices (bnc#464155) - Implement dev_loss_tmo and fast_io_fail_tmo (bnc#464155) - Use default values for dev_loss_tmo and fast_io_fail_tmo - Display checker and prio name on failure - Add more debugging output ------------------------------------------------------------------- Mon Jan 12 17:28:47 CET 2009 - hare@suse.de - Set max_fds setting for multipath (bnc#457443) - Enhance error messages for checker and prio loading (bnc#456214) - Fix merge errors for prio_weightedpath (bnc#441007) - Fix sysfs_attr_get_value (bnc#456747) - Do not reinitialize prio and checker lists after config file has been parsed (bnc#464373) - Minor cleanups ------------------------------------------------------------------- Thu Dec 4 15:05:08 CET 2008 - hare@suse.de - Split off IBM ESS hwtable entries (bnc#439763) - Reload map when device R/O setting changes (bnc#440959) ------------------------------------------------------------------- Fri Nov 21 14:07:56 CET 2008 - hare@suse.de - Add 'Weighted Paths' prioritizer (bnc#441007) - Fix crashes in update_multipath ------------------------------------------------------------------- Thu Nov 20 16:10:48 CET 2008 - hare@suse.de - Valgrind fixes * Add missing initialisation * Always allocate memory for alias * Check return value of basename - Adapt to new sysfs layout (bnc#435215, bnc#445041) - Use /sys/dev to speedup reverse lookups - Rework sysfs device handling (bnc#435215, bnc#438031) - Search for correct hardware entry during reconfigure (bnc#435688) - Use local variables for device mapper params - Allow zero paths for multipath maps ------------------------------------------------------------------- Mon Nov 17 12:42:34 CET 2008 - hare@suse.de - Update HP hardware table (bnc#442133) - Zero out lines in print.c (bnc#445023) ------------------------------------------------------------------- Mon Nov 10 08:51:26 CET 2008 - hare@suse.de - Check for empty mpvecs in mpvec_garbage_collector() (bnc#437245) - dmraid uuid starts with 'DMRAID' (bnc#439439) - Handle arguments to multipathd from the init file ------------------------------------------------------------------- Thu Nov 6 17:36:51 CET 2008 - ro@suse.de - commenting multiline rpm macros is dangerous (read broken) remove percent sign in commented macro lines ------------------------------------------------------------------- Mon Nov 3 15:37:08 CET 2008 - hare@suse.de - Use pthread_join() during shutdown to avoid crash (bnc#437245) - Fixup '%n' to handle '!' kernel device name syntax (bnc#435172) - Use correct commandline for cciss scsi_id callouts (bnc#435172) - Do not check for valid mp context in get_state() (bnc#433659) - Link directio checker against libaio (bnc#433659) - Use regmatch when checking for duplicates in hwtable (bnc#439763) ------------------------------------------------------------------- Mon Oct 27 10:30:18 CET 2008 - hare@suse.de - Patches from mainline: * Increase bindings file lock timeout * Fixes for 'show paths format' * Add 'show wildcards' cli cmd * Add support for IBM storage devices - fopen() returns NULL on failure (bnc#432598) - Read verbosity level from configuration file (bnc#388284) - kpartx -l does not remove it's loop device (bnc#417266) - Missing fixes for libprio ontap.c (bnc#426975) - Increase buffer size in find_loop_by_file (bnc#436428) - Include SCSI device handler modules for initrd (bnc#431877) ------------------------------------------------------------------- Fri Sep 26 16:26:55 CEST 2008 - hare@suse.de - Implement map resize (FATE#302007) - Handle cciss devices correctly (bnc#419123) ------------------------------------------------------------------- Wed Sep 24 22:59:11 CEST 2008 - ro@suse.de - use udevadm info instead of udevinfo ------------------------------------------------------------------- Wed Sep 3 11:09:34 CEST 2008 - hare@suse.de - Merge in fixes from upstream: * Add IBM IPR to hardware table (bnc#419086) * Add IBM DS4300 to hardware table * Fix settings for scsi_id changes - Call mkinitrd_setup during %post and %postun (bnc#413709) ------------------------------------------------------------------- Thu Aug 28 17:08:16 CEST 2008 - ro@suse.de - fix init scripts ------------------------------------------------------------------- Wed Jul 23 14:45:18 CEST 2008 - hare@suse.de - Update to version 0.4.8 - Include changes from SLES10 - Include mkinitrd scriptlets ------------------------------------------------------------------- Wed May 28 09:50:28 CEST 2008 - hare@suse.de - Calculate correct partition offset in kpartx (bnc#394658) ------------------------------------------------------------------- Fri May 9 13:25:30 CEST 2008 - hare@suse.de - Fixup kpartx rules (bnc#387667) ------------------------------------------------------------------- Tue Apr 29 17:05:19 CEST 2008 - hare@suse.de - Merge in fixes from upstream - Merge fixes from SLES10 SP2 ------------------------------------------------------------------- Wed Sep 19 15:30:41 CEST 2007 - hare@suse.de - Fixup generated dm_linear udev rules (#218122) ------------------------------------------------------------------- Thu Aug 30 09:24:27 CEST 2007 - hare@suse.de - Rework dm_linear; udev rules should only be created if the feature was activated (#302422) ------------------------------------------------------------------- Fri Aug 10 16:48:31 CEST 2007 - hare@suse.de - Implement dm_linear (#218122) ------------------------------------------------------------------- Thu Aug 2 11:10:35 CEST 2007 - hare@suse.de - Merge in latest fixes from upstream - Remove local patches; merge with upstream - Fix kpartx handling of extended partitions - Use underscores for partition names (#293792) ------------------------------------------------------------------- Mon May 21 15:34:07 CEST 2007 - hare@suse.de - Rework udev handling - Split off kpartx package ------------------------------------------------------------------- Mon May 14 16:20:55 CEST 2007 - hare@suse.de - Merge in latest fixes from upstream - Add all SuSE specific files to git repository. ------------------------------------------------------------------- Fri May 11 16:06:16 CEST 2007 - hare@suse.de - Include latest changes from upstream - Remove libsysfs (242766) - Handle extended partitions for kpartx ------------------------------------------------------------------- Mon Dec 4 16:51:13 CET 2006 - dmueller@suse.de - don't build as root ------------------------------------------------------------------- Fri Nov 17 11:55:00 CET 2006 - hare@suse.de - integrate upstream fixes - update udev rule for YaST2 dmraid support (217807]) ------------------------------------------------------------------- Mon Nov 6 13:11:17 CET 2006 - hare@suse.de - Really fixup udev rule (216167). ------------------------------------------------------------------- Fri Oct 20 02:07:47 CEST 2006 - ro@suse.de - make it build ------------------------------------------------------------------- Mon Sep 25 10:03:49 CEST 2006 - hare@suse.de - update to latest fixes from git tree - remove fixes integrated in upstream - fixup udev rule (#203688) ------------------------------------------------------------------- Thu Sep 14 00:18:10 CEST 2006 - ro@suse.de - use device-mapper-devel in BuildRequires ------------------------------------------------------------------- Thu Aug 31 10:56:01 CEST 2006 - hare@suse.de - include latest fixes from git tree - update kpartx_id and udev rules to work with dmraid. - Fix return value for multipath -l ------------------------------------------------------------------- Thu Aug 17 02:07:59 CEST 2006 - ro@suse.de - workaround problem in git-patch normal patch can't do a "rename", so copy file first ------------------------------------------------------------------- Tue Jul 11 15:04:59 CEST 2006 - hare@suse.de - Update to official version 0.4.7 - Refactor git update to apply to 0.4.7 ------------------------------------------------------------------- Wed Jun 28 13:51:36 CEST 2006 - hare@suse.de - Remove blacklisting of dasd device node, use product_blacklist instead (#188688) ------------------------------------------------------------------- Mon Jun 12 15:14:41 CEST 2006 - hare@suse.de - Add 72-multipath-compat.rules to create 'by-name' symlink again for compability (#183663) ------------------------------------------------------------------- Fri Jun 2 12:47:05 CEST 2006 - hare@suse.de - Merge in fixed from upstream - Set device-mapper name correctly (#181127) ------------------------------------------------------------------- Thu Jun 1 17:29:23 CEST 2006 - hare@suse.de - Merge in fixes from upstream - Fixup aliasing handling - Fix string length in pp_alua - Use correct regexp patterns for hwtable (#177842) - Fixup 71-multipath.rules to work correctly with the updated device-mapper online/offline events (#176516 - LTC23961) - Add kpartx_id for the updated 71-multipath.rules ------------------------------------------------------------------- Mon May 22 17:16:00 CEST 2006 - schwab@suse.de - Don't strip binaries. ------------------------------------------------------------------- Tue May 2 12:48:56 CEST 2006 - hare@suse.de - Merge in fixes from upstream - Merged local patches - Added hds_modular prioritizer - Remove merged patches - Allow for setting of maximum number of open files (#149979) - Implement 'stop' for init scripts ------------------------------------------------------------------- Mon Apr 10 09:48:16 CEST 2006 - hare@suse.de - Lowering priority for pp_tpc - Split off DS6000 to fixup priority handler (#161347) ------------------------------------------------------------------- Wed Apr 5 12:14:53 CEST 2006 - hare@suse.de - Disable debug messages in pp_tpc. ------------------------------------------------------------------- Wed Mar 29 09:27:50 CEST 2006 - hare@suse.de - Explicitely create partitions at boot time (#159927) ------------------------------------------------------------------- Thu Mar 23 11:36:25 CET 2006 - hare@suse.de - Add hwtable entry for IBM 3526. ------------------------------------------------------------------- Tue Mar 14 16:40:41 CET 2006 - hare@suse.de - Fix another typo in mpath_id. ------------------------------------------------------------------- Tue Mar 14 16:20:33 CET 2006 - hare@suse.de - Fix typo in mpath_id. ------------------------------------------------------------------- Mon Mar 13 13:29:08 CET 2006 - hare@suse.de - Fix autobuild warnings. - Include some minor fixed from upstream. ------------------------------------------------------------------- Thu Mar 9 11:28:11 CET 2006 - hare@suse.de - Add mpath_id program to call kpartx only on multipathed devices (#149995 - LTC21557). - Include latest fixes from upstream. ------------------------------------------------------------------- Wed Feb 8 16:13:15 CET 2006 - hare@suse.de - Add device blacklisting (#85778) - Further manpage installation fixes (#146179, #147053, #147911) ------------------------------------------------------------------- Wed Jan 25 21:38:27 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Thu Jan 19 13:59:32 CET 2006 - hare@suse.de - Fix manpage installation. ------------------------------------------------------------------- Tue Jan 17 09:01:03 CET 2006 - hare@suse.de - Include latest git fixes - Remove old patches which are now upstream - Add new hwtable entry for shark (#142176) ------------------------------------------------------------------- Fri Dec 16 15:20:47 CET 2005 - hare@suse.de - Fix dependencies for /etc/init.d/boot.multipath - Fix kpartx rules to generate proper partition names. ------------------------------------------------------------------- Wed Dec 7 16:49:02 CET 2005 - hare@suse.de - Update to multipath-tools-0.4.6 - Include latest git fixes - Port patches from SLES9 SP3 ------------------------------------------------------------------- Mon Oct 31 12:30:14 CET 2005 - dmueller@suse.de - don't build as root ------------------------------------------------------------------- Mon Sep 5 17:40:04 CEST 2005 - matz@suse.de - Fix broken usage of self-defined syscall [#114933]. ------------------------------------------------------------------- Fri Aug 26 16:00:36 CEST 2005 - hare@suse.de - Fix kpartx DASD partition support ------------------------------------------------------------------- Thu Aug 4 16:45:27 CEST 2005 - hare@suse.de - Add 'directio' path checker - Add support for S/390 DASD (PAV enablement). - Update to package from SLES9 ------------------------------------------------------------------- Thu Jun 23 10:05:56 CEST 2005 - lmb@suse.de - LUs with a WWN containing "fd" were blacklisted (#93562). ------------------------------------------------------------------- Thu Jun 16 16:33:42 CEST 2005 - lmb@suse.de - Remove stray newline character from /dev/disk/by-name/ entries (#85798, #86763) - Clear /dev/disk/by-name/ on boot. (#85978) - scsi_id now handles EMC Symmetrix; remove work-around for #86760. ------------------------------------------------------------------- Wed Jun 15 13:31:47 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS. ------------------------------------------------------------------- Mon Jun 13 23:51:59 CEST 2005 - ro@suse.de - neededforbuild: udev -> sysfsutils ------------------------------------------------------------------- Tue Jun 7 15:38:36 CEST 2005 - lmb@suse.de - Import fixes from upstream. - Hardware table updates for IBM ESS and EMC CX (#81688). - Reinstate paths correctly after failure/restore cycle (#85781, #86444). - Create map names again and fix segfault in devmap_name (#85798). ------------------------------------------------------------------- Tue May 24 15:16:16 CEST 2005 - hare@suse.de - Fix segmentation fault with EMC Symmetrix (#85614). - Update EMC Symmetrix entry in hwtable. ------------------------------------------------------------------- Mon May 23 12:21:31 CEST 2005 - hare@suse.de - Add hwtable entry for IBM DS6000. (#63903) - Do a rescan for devices if multipath command line option is set. ------------------------------------------------------------------- Fri May 20 15:29:45 CEST 2005 - hare@suse.de - Fix devmap_name to use mapname and return proper status (#84748). ------------------------------------------------------------------- Thu May 12 12:10:39 CEST 2005 - lmb@suse.de - Don't complain about default prio callout command (#81695). - Reflect recent changes in boot.multipath as well as multipathd init scripts. - Actually fail paths when they are detected to be failed by multipathd (#81679). - killproc/startproc/checkproc can't be used with multipathd because of the way the daemon switches to its own namespace (#80443). ------------------------------------------------------------------- Mon May 9 11:18:35 CEST 2005 - hare@suse.de - Use proper path checker for SGI TPC arrays. - Update hwtable entries for SGI TP9400 and SGI TP9500. - Write correct PID file (#80443). ------------------------------------------------------------------- Mon Apr 25 11:41:33 CEST 2005 - lmb@suse.de - Update to 0.4.4: pp_alua now licensed as GPL (#78628). - multipath-tools-oom-adj.patch: oom_adj to a valid value. ------------------------------------------------------------------- Thu Apr 21 10:50:05 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre18 which fixes the multipathd to initialize correctly in the absence of a configuration file (79239). ------------------------------------------------------------------- Wed Apr 20 16:05:56 CEST 2005 - lmb@suse.de - Put multipath cache back into /dev because /var might not be mounted. - Correct hwtable entry SGI TP9400, TP9500 and IBM 3542. ------------------------------------------------------------------- Wed Apr 20 13:32:51 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre16 - Build against device-mapper.1.01.xx correctly. ------------------------------------------------------------------- Tue Apr 19 12:02:49 CEST 2005 - lmb@suse.de - Build w/o device-mapper update again. ------------------------------------------------------------------- Mon Apr 18 14:21:59 CEST 2005 - lmb@suse.de - Update to 0.4.4-pre14 - Build versus device-mapper-1.01.01 to prevent deadlocks in kernel-space. - Fix devmap_name to work with udev. - Fix startup of multipathd w/o configuration file present. ------------------------------------------------------------------- Fri Apr 15 14:46:19 CEST 2005 - lmb@suse.de - Add path priority checker for EMC CLARiiON and make necessary adjustments so that it gets called by default (#62491). - Set the default udev dir to '/dev' ------------------------------------------------------------------- Fri Apr 15 13:18:42 CEST 2005 - hare@suse.de - Fix to allocate default strings (#78056) - Fix default entry for TPC9500. ------------------------------------------------------------------- Wed Apr 13 08:30:21 CEST 2005 - hare@suse.de - Added pp_alua path priority checker. - Update to multipath-tools-0.4.4-pre12. ------------------------------------------------------------------- Mon Apr 11 13:32:05 CEST 2005 - hare@suse.de - Update to multipath-tools-0.4.4-pre10. ------------------------------------------------------------------- Fri Apr 8 09:38:16 CEST 2005 - hare@suse.de - Update multipath to handle only true multipath devices (#62491). - Update kpartx to use the device mapper target name if available. - Add boot.multipath script for early set up of multipath targets. ------------------------------------------------------------------- Thu Mar 31 09:32:12 CEST 2005 - hare@suse.de - Update devmap_name to select targets by table type (#62493). ------------------------------------------------------------------- Tue Jan 25 11:16:26 CET 2005 - lmb@suse.de - Update to 0.4.2 and fix some bugs + add support for the extended DM multipath kernel module. (#47491) ------------------------------------------------------------------- Thu Nov 11 18:15:15 CET 2004 - hare@suse.de - Fix bugs to make it work on S/390 (#47491). ------------------------------------------------------------------- Fri Nov 5 13:58:00 CET 2004 - hare@suse.de - Update to version 0.3.6 (#47491). - Fix multipath init script - Install configuration file example. - Install multipathd in /sbin instead of /usr/bin. ------------------------------------------------------------------- Tue Jul 20 09:22:11 CEST 2004 - fehr@suse.de - updated README mp-tools-issues.pdf (see #40640) ------------------------------------------------------------------- Wed Jun 9 12:18:01 CEST 2004 - fehr@suse.de - added pdf with README to package (see #40640) ------------------------------------------------------------------- Thu Jun 3 18:11:41 CEST 2004 - fehr@suse.de - updated to version 0.2.1 - removed patches zero-currpath.patch and rm-newline-in-name.patch already contained in 0.2.1 ------------------------------------------------------------------- Thu Jun 3 09:38:49 CEST 2004 - fehr@suse.de - added patch zero-currpath.patch (see bugzilla #40640) ------------------------------------------------------------------- Wed May 26 20:14:05 CEST 2004 - uli@suse.de - fixed to build on s390x ------------------------------------------------------------------- Wed May 26 10:57:37 CEST 2004 - fehr@suse.de - added patch rm-newline-in-name.patch (see bugzilla #40640) ------------------------------------------------------------------- Tue May 25 10:43:15 CEST 2004 - fehr@suse.de - created initial version of a SuSE package from version 0.2.0 of multipath tools -------------------------------------------------------------------
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
