File _patchinfo of Package patchinfo.5365
<patchinfo incident="5365"> <issue id="808647" tracker="bnc">DASD(s) won't be re-added automatically to the MD Array after channel path(s) online.</issue> <issue id="881530" tracker="bnc">[Intel SLES12 Bug] Reshape fails to continue after restart on IMSM RAID array</issue> <issue id="882634" tracker="bnc">[Intel SLES12 BUG] IMSM RAID volume can be fully assembled with disks attached to different controllers</issue> <issue id="887773" tracker="bnc">[Intel SLES12 Bug] Reshape freeze at 0% for array-specific migration</issue> <issue id="923920" tracker="bnc">[MDRAID] Reshape initiation fail</issue> <issue id="926517" tracker="bnc">[Intel SLES11 SP4 Bug] Mdadm allow to create more IMSM arrays then supported by OROM</issue> <issue id="926767" tracker="bnc">[Intel SLES11 SP4 Bug] Reshape does not proceed after dirty shutdown</issue> <issue id="937363" tracker="bnc">One hard disk wrongly detected as a RAID. Impossible to mount NTFS partitions.</issue> <issue id="939748" tracker="bnc">One hard disk wrongly detected as a RAID. Impossible to mount NTFS with Win7 installation</issue> <issue id="943028" tracker="bnc">[Intel SLES12SP1 Bug] IMSM RAID: Migration record is not always cleared after successful reshape</issue> <issue id="953595" tracker="bnc">md_monitor testcase 7 fails with 'Unsufficient head-space for reshape'</issue> <issue id="956236" tracker="bnc">MD fails to start with multipathed devices on bootup</issue> <issue id="966773" tracker="bnc">mdadm --stop behavior is inconsistent</issue> <issue id="974154" tracker="bnc">segfault from mdadm --manage --re-add</issue> <issue id="1032802" tracker="bnc">mdadm -examine reports a '?' in the array state.</issue> <issue id="1081910" tracker="bnc">Update mdadm package with more upstream fixes</issue> <issue id="311379" tracker="fate"/> <issue id="316335" tracker="fate"/> <issue id="317456" tracker="fate"/> <category>recommended</category> <rating>low</rating> <packager>colyli</packager> <description>This update for mdadm provides the backporting of some critical fixes from upstream, and replace some existing patches with their upstream counterpart (bsc#1081910). The following fixes are included: - Grow: Followup fix for a problem that reshape fails to continue after restart on IMSM RAID array. (bsc#881530) - mdmon: Ensure Unix domain socket is created with safe permissions. (bsc#1081910) - IMSM: Add a warning message when assembling a spanned container. (bsc#882634) - mdmon: Allow prepare_update to report failures. (bsc#1081910) - DDF, IMSM: Validate metadata_update size before using it. (bsc#1081910) - Grow: Do not try to restart if reshape is running. (bsc#887773) - Grow: Fix a problem that was preventing resize of arrays to 32bit size. (bsc#1081910) - Grow: Improve error message if "--grow -n2" is used on linear arrays. (bsc#1081910) - Assemble: Only fail auto-assemble in face of mdadm.conf conflicts. (bsc#1081910) - config: Add a new option to suppress adding bad block lists. (bsc#1081910) - Monitor: Stop monitoring devices that have disappeared. (bsc#1081910) - super1: Do not allow adding a bitmap if there is no space. (bsc#1081910) - Grow: Report when grow needs metadata update. (bsc#1081910) - Grow: Fix resizing of array components to greater than 32bits sizes/ (bsc#1081910) - imsm: Add support for OROMs shared by multiple HBAs. (fate#317456) - imsm: Add support for second and combined AHCI controllers in UEFI mode. (fate#317456) - imsm: Add support for NVMe devices. (fate#317456) - imsm: Add some detail-platform improvements. (fate#317456) - imsm: Use efivarfs interface for reading UEFI variables. (fate#317456) - Monitor: Fix a regression with container devices. (bsc#1081910) - imsm: Simplified the support for multiple OROMs. (bsc#1081910) - Assemble: Fix "no uptodate device" message. (bsc#1081910) - Assemble: Allow a RAID4 to assemble easily when parity devices are missing. (bsc#926767) - Assemble/force: Make it possible to "force" a new device in a reshape. (bsc#1081910) - IMSM: Count arrays per OROM. (bsc#926517) - Assemble: Do not check for pre-existing array when updating uuid. (bsc#1081910) - Grow: Only warn about incompatible metadata when no fallback available. (bsc#1081910) - Grow: Be more careful if the array is stopped during critical section. (bsc#1081910) - Grow: Be even more careful about handing a '0' completed value. (bsc#1081910) - Grow: Fix problem with --grow --continue. (bsc#1081910) - Create n bitmaps for clustered mode. (bsc#1081910) - Add nodes option while creating md. (bsc#1081910) - Set home-cluster while creating an array. (bsc#1081910) - Show all bitmaps while examining bitmap. (bsc#1081910) - Add a new clustered disk. (bsc#1081910) - Convert a bitmap=none device to clustered. (bsc#1081910) - Skip clustered devices in incremental. (bsc#1081910) - mdadm: Add the ability to change cluster name. (bsc#1081910) - mdadm: Change the number of cluster node. (bsc#1081910) - Assemble: Ensure stripe_cache is big enough to handle new chunk size. (bsc#1081910) - Monitor: Don't wait forever on a 'frozen' array. (bsc#1081910) - Manage/stop: Guard against 'completed' being too large. (bsc#1081910) - Manage/stop: Don't stop during initial critical section (bsc#1081910) - raid6check: Report role of suspect device. (bsc#1081910) - raid6check: Get device ordering correct for syndrome calculation. (bsc#1081910) - Assemble: Really ensure stripe_cache is bit enough to handle new chunk size. (bsc#1081910) - restripe: Fix data block order in raid6_2_data_recov. (bsc#1081910) - mdadm: Document the --homehost=any functionality. (bsc#1081910) - mdassemble: Add "Name" definition. (bsc#1081910) - mdassemble: Do not try to perform cluster check. (bsc#1081910) - mdassemble: Include mapfile support. (bsc#1081910) - super1: Do not create bad block log for clustered devices. (bsc#1081910) - Fix --incremental handling on cluster array. (bsc#1081910) - mdadm: Make cluster raid also support re-add. (bsc#1081910) - re-add: Make re-add try to write the sysfs node first. (bsc#1081910) - Show device as journal in --detail --examine. (bsc#1081910) - Enable create array with write journal (--write-journal DEVICE). (bsc#1081910) - Assemble array with write journal. (bsc#1081910) - Check write journal in incremental. (bsc#1081910) - Add help message and man entry for --write-journal. (bsc#1081910) - Add a safeguard against writing to an active device of another node. (bsc#1081910) - Add crc32c and use it for r5l checksum. (bsc#1081910) - Make sure 'path' buffer is large enough to fit 200 characters plus null terminator. (bsc#1081910) - Recreate journal in mdadm. (bsc#1081910) - mdadm: Allow cluster raid to also add disk within incremental mode. (bsc#1081910) - mdadm: Output information more precisely when changing bitmap to none. (bsc#1081910) - mdadm: Do not show cluster name once the bitmap is cleared. (bsc#1081910) - mdadm: Do not display bitmap info if it is cleared. (bsc#1081910) - mdadm: Do not try to hold dlm lock in free_super1. (bsc#1081910) - mdadm: Improve the safeguard for changing cluster raid's sb. (bsc#1081910) - Detail: Report correct raid-disk for removed drives. (bsc#1081910) - Check and remove bitmap first when reshape to raid0. (bsc#1081910) - Create: Fix a regression in setting raid_disk. (bsc#1081910) - systemd/mdadm-last-resort: Add Conflicts to .service file. (bsc#1081910) - super0: Fix reporting of devices between 2GB and 4GB. (bsc#1081910) - super1: Allow reshape that hasn't really started to be reverted. (bsc#1081910) - super-intel: Ensure suspended region is removed when reshape completes. (bsc#1081910) - Fix wrong bitmap output for cluster raid. (bsc#1081910) - mdadm: Add '--nodes' option in GROW mode. (bsc#1081910) - Consistent use of metric prefix in manpage. (bsc#1081910) - Create: Check the node numbers when creating a clustered raid. (bsc#1081910) - Grow: Handle failure to load superblock in Grow_addbitmap(). (bsc#1081910) - Grow: Simplify error paths in Grow_addbitmap(). (bsc#1081910) - The sys_name array in the mdinfo structure is 20 bytes of storage (bsc#1081910) - monitor: Make sure that last_checkpoint is set to 0 after sync. (bsc#1081910) - Remove: Container should wait for an array to release a drive. (bsc#1081910) - Fix RAID metadata checking. (bsc#1081910) - Allow level migration only for single-array container. (bsc#1081910) - Fix bus error when accessing MBR partition records. (bsc#1081910) - Add failfast support. (fate#311379) - mdadm: Add bad block support for external metadata. (bsc#1081910) - Use disk sector size value to set offset for reading GPT. (bsc#1081910) - Always return last partition end address in 512B blocks. (bsc#1081910) - Add detail information when can't connect monitor. (bsc#1081910) - reshape: Support raid5 grow on certain older kernels. (bsc#923920) - Assemble: Do not assemble IMSM array without OROM. (bsc#939748, bsc#937363) - Fix --incremental handling on cluster array. - IMSM: Clear migration record on disks more often. (bsc#943028) - mdadm: Remove the cluster-md related information from the documentation. (fate#316335) - Display timeout status. (fate#311379) - Retry failed removes. (bsc#808647) - Detail: Ignore empty inactive arrays. (bsc#966773) - mdadm: Wait for remove to fix a segmentation fault from mdadm when using --manage --re-add (bsc#974154) - udev-md-raid-assembly.rules: Skip multipathed devices. (bsc#956236) - super1: Fix superblock's max_dev when adding a new disk in linear array. (bsc#1032802) </description> <summary>Recommended update for mdadm</summary> </patchinfo>
