File mod_nss_migrate.pl of Package apache2-mod_nss.463

Overview Repositories Revisions Requests Users Attributes Meta

File mod_nss_migrate.pl of Package apache2-mod_nss.463

#!/usr/bin/perl
#
# Migrate configuration from OpenSSL to NSS

use Cwd;
use Getopt::Std;

BEGIN {
#   $NSSDir = cwd();
   $NSSDir = "/etc/apache2/mod_nss.d";

$SSLCACertificatePath = "";
   $SSLCACertificateFile = "";
   $SSLCertificateFile = "";
   $SSLCARevocationPath = "";
   $SSLCARevocationFile = "";
   $SSLCertificateKeyFile = "";
   $passphrase = 0;
}

%skip = ( "SSLRandomSeed" => "",
          "SSLSessionCache" => "",
          "SSLMutex" => "",
          "SSLCertificateChainFile" => "",
          "SSLVerifyDepth" => "" ,
          "SSLCryptoDevice" => "" ,
          "LoadModule" => "" ,
         );

%insert =  ( "NSSSessionCacheTimeout", "NSSSessionCacheSize 10000\nNSSSession3CacheTimeout 86400\n",);

getopts('chr:w:' , \%opt );

sub usage() {
    print STDERR "Usage: mod_nss_migrate.pl [-c] -r <mod_ssl input file> -w <mod_nss output file>\n";
    print STDERR "\t-c converts the certificates\n";
    print STDERR "This conversion script is not aware of apache's configuration blocks\n";
    print STDERR "and nestable conditional directives. Please check the output of the\n";
    print STDERR "conversion and adjust manually if necessary!\n";
    exit();
}

usage() if ( $opt{h} || !$opt{r} || !$opt{w} ) ;

print STDERR "input: $opt{r} output: $opt{w}\n";

open (SSL, "<", $opt{r} ) or die "Unable to open $opt{r}: $!.\n";
open (NSS, ">", $opt{w} ) or die "Unable to open $opt{w}: $!.\n";

print NSS "## This is a conversion of mod_ssl specific options by /usr/sbin/mod_nss_migrate.pl\n";
print NSS "## Most of the comments in the original .conf file have been omitted here, as\n";
print NSS "## the comments may not be valid for mod_nss, too.\n";
print NSS "## \n";
print NSS "## Please read through this configuration and verify the individual options!\n\n";

while (<SSL>) {
    my $comment = 0;

# write through even if in comment before comments are stripped below.
    if(/(ServerName|ServerAlias)/) {
	print NSS $_;
	next;
    }

# skip blank lines and comments
    if (/^#/ || /^\s*#/ || /^\s*$/) {
# do not copy them; they may not be useful anyway.
#        print NSS $_;
        next;
    }

s/mod_ssl\.c/mod_nss.c/;

# write through nestable apache configuration block directives:
    if (/^</ || /^\s</) {
        print NSS $_;
        next;
    }

m/(\w+)\s+(.+)/;
    $stmt = $1;
    $value = $2;

# Handle the special cases
    if ($stmt eq "SSLVerifyClient" && $value eq "optional_no_ca") {
        print NSS "# Replaced optional_no_ca with optional\n";
        print NSS "SSLVerifyClient optional\n";
        next;
    }

if ($stmt eq "SSLCipherSuite") {
       print NSS "## original SSLCipherSuite config line: $_";
       print NSS "NSSCipherSuite ", get_ciphers($val), "\n\n";
       next;
    } elsif ($stmt eq "SSLEngine" ) {
       print NSS "##$_";
       print NSS "NSSEngine $value\n\n";
       next;
    } elsif ($stmt eq "SSLProtocol" ) {
       print NSS "## we ignore the arguments to SSLProtocol. The original value was:\n";
       print NSS "##$_";
       print NSS "## The following is a _range_ from TLSv1.0 to TLSv1.2.\n";
       print NSS "## You may also specify SSLv3 at the beginning of the range. Not done here:\n";
       print NSS "NSSProtocol TLSv1.0,TLSv1.2\n\n";
       next;
    } elsif ($stmt eq "SSLCACertificatePath") {
       $SSLCACertificatePath = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLCACertificateFile") {
       $SSLCACertificateFile = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLCertificateFile") {
       print NSS "NSSCertificateDatabase $NSSDir\n";
       print NSS "NSSNickName Server-Cert\n";
       $SSLCertificateFile = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLCertificateKeyFile") {
       $SSLCertificateKeyFile = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLCARevocationPath") {
       $SSLCARevocationPath = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLCARevocationFile") {
       $SSLCARevocationFile = $value;
       $comment = 1;
    } elsif ($stmt eq "SSLPassPhraseDialog") {
       print NSS "NSSPassPhraseHelper /usr/sbin/nss_pcache\n";
       $passphrase = 1;
       $comment = 1;
    }

if (exists($skip{$stmt})) {
        print NSS "# Skipping, not applicable in mod_nss\n";
        print NSS "##$_";
        next;
    }

# Fix up any remaining directive names
    s/SSL/NSS/;

if (exists($insert{$stmt})) {
        print NSS "$_";
        print NSS $insert{$stmt};
        next;
    }

# Fall-through to print whatever is left
    if ($comment) {
        print NSS "##$_";
        $comment = 0;
    } else {
        print NSS $_;
    }

}

if ($passphrase == 0) {
    print NSS "NSSPassPhraseHelper /usr/sbin/nss_pcache\n";
}

close(NSS);
close(SSL);

#
# Create NSS certificate database and import any existing certificates
#

if ($opt{c}) {
    print STDERR "Creating NSS certificate database.\n";
    run_command("certutil -N -d $NSSDir");

# Convert the certificate into pkcs12 format
    if ($SSLCertificateFile ne "" && $SSLCertificateKeyFile ne "") {
        my $subject = get_cert_subject($SSLCertificateFile);
        print STDERR "Importing certificate $subject as \"Server-Cert\".\n";
        run_command("openssl pkcs12 -export -in $SSLCertificateFile -inkey $SSLCertificateKeyFile -out server.p12 -name \"Server-Cert\" -passout pass:foo ");
        run_command("pk12util -i server.p12 -d $NSSDir -W foo ");
    }

if ($SSLCACertificateFile ne "") {
        my $subject = get_cert_subject($SSLCACertificateFile);
        if ($subject ne "") {
            print STDERR "Importing CA certificate $subject\n";
            run_command("certutil -A -n \"$subject\" -t \"CT,,\" -d $NSSDir -a -i $SSLCACertificateFile ");
        }
    }

if ($SSLCACertificatePath ne "") {
        opendir(DIR, $SSLCACertificatePath) or die "can't opendir $SSLCACertificatePath: $!";
        while (defined($file = readdir(DIR))) {
            next if -d $file;

# we can operate directly on the hash files so don't have to worry
            # about any SKIPME's.
            if ($file =~ /hash.*/) {
                my $subject = get_cert_subject("$SSLCACertificatePath/$file");
                if ($subject ne "") {
                    print STDERR "Importing CA certificate $subject\n";
                    run_command("certutil -A -n \"$subject\" -t \"CT,,\" -d $NSSDir -a -i $SSLCACertificatePath/$file  ");
                }
            }
        }
        closedir(DIR);
    }

if ($SSLCARevocationFile ne "") {
        print STDERR "Importing CRL file $CARevocationFile\n";
            # Convert to DER format
            run_command("openssl crl -in $SSLCARevocationFile -out /root/crl.tmp -inform PEM -outform DER");
            run_command("crlutil -I -t 1 -d $NSSDir -i /root/crl.tmp");
            unlink("/root/crl.tmp");
    }

if ($SSLCARevocationPath ne "") {
        opendir(DIR, $SSLCARevocationPath) or die "can't opendir $SSLCARevocationPath: $!";
        while (defined($file = readdir(DIR))) {
            next if -d $file;

# we can operate directly on the hash files so don't have to worry
            # about any SKIPME's.
            if ($file =~ /hash.*/) {
                my $subject = get_cert_subject("$SSLCARevocationPath/$file");
                if ($subject ne "") {
                    print STDERR "Importing CRL file $file\n";
                    # Convert to DER format
                    run_command("openssl crl -in $SSLCARevocationPath/$file -out /root/crl.tmp -inform PEM -outform DER");
                    run_command("crlutil -I -t 1 -d $NSSDir -i /root/crl.tmp");
                    unlink("/root/crl.tmp");
                }
            }
        }
        closedir(DIR);
    }
}

print STDERR "\n\nConversion complete.\n";
print STDERR "The output file should contain a valid mod_nss configuration based on\n";
print STDERR "the mod_ssl directives from the input file.\n";
print STDERR "Recommended directory: /etc/apache2/mod_nss.d , suffix .conf!\n";
print STDERR "Also make sure to edit /etc/apache2/conf.d/mod_nss.conf and to remove the\n";
print STDERR "<VirtualHost> section if you do not need it.\n\n";
print STDERR "Also, do not forget to rename the ssl based apache config file";
print STDERR "(our example: myhost-ssl.conf) to a file that does not end in .conf\n";
print STDERR "(our example: myhost-ssl.conf-disabled-for-nss)\n\n";
print STDERR "Then, restart apache (rcapache2 restart) and have a look into the error logs.\n";

exit(0);

# Migrate configuration from OpenSSL to NSS
sub get_ciphers {
    my $str = shift;

%cipher_list = (
        "rc4" => ":ALL:SSLv2:RSA:MD5:MEDIUM:RC4:", 
        "rc4export" => ":ALL:SSLv2:RSA:EXP:EXPORT40:MD5:RC4:",
        "rc2" => ":ALL:SSLv2:RSA:MD5:MEDIUM:RC2:",
        "rc2export" => ":ALL:SSLv2:RSA:EXP:EXPORT40:MD5:RC2:",
        "des" => ":ALL:SSLv2:RSA:EXP:EXPORT56:MD5:DES:LOW:",
        "desede3" => ":ALL:SSLv2:RSA:MD5:3DES:HIGH:",
        "rsa_rc4_128_md5" => ":ALL:SSLv3:TLSv1:RSA:MD5:RC4:MEDIUM:",
        "rsa_rc4_128_sha" => ":ALL:SSLv3:TLSv1:RSA:SHA:RC4:MEDIUM:",
        "rsa_3des_sha" => ":ALL:SSLv3:TLSv1:RSA:SHA:3DES:HIGH:",
        "rsa_des_sha" => ":ALL:SSLv3:TLSv1:RSA:SHA:DES:LOW:",
        "rsa_rc4_40_md5" => ":ALL:SSLv3:TLSv1:RSA:EXP:EXPORT40:RC4:",
        "rsa_rc2_40_md5" => ":ALL:SSLv3:TLSv1:RSA:EXP:EXPORT40:RC2:",
        "rsa_null_md5" => ":SSLv3:TLSv1:RSA:MD5:NULL:",
        "rsa_null_sha" => ":SSLv3:TLSv1:RSA:SHA:NULL:",
        "rsa_des_56_sha" => ":ALL:SSLv3:TLSv1:RSA:DES:SHA:EXP:EXPORT56:",
        "rsa_rc4_56_sha" => ":ALL:SSLv3:TLSv1:RSA:RC4:SHA:EXP:EXPORT56:",
    );

$NUM_CIPHERS = 16;

for ($i = 0; $i < $NUM_CIPHERS; $i++) {
        $selected[$i] = 0;
    }
    
    # Don't need to worry about the ordering properties of "+" because
    # NSS always chooses the "best" cipher anyway. You can't specify
    # preferred order.
    
    # -1: this cipher is completely out
    #  0: this cipher is currently unselected, but maybe added later
    #  1: this cipher is selected
    
    @s = split(/:/, $str);
    
    for ($i = 0; $i <= $#s; $i++) {
        $j = 0;
        $val = 1;
    
        # ! means this cipher is disabled forever
        if ($s[$i] =~ /^!/) {
            $val = -1;
            ($s[$i] =~ s/^!//);
        } elsif ($s[$i] =~ /^-/) {
            $val = 0;
            ($s[$i] =~ s/^-//);
        } elsif ($s[$i] =~ /^+/) {
            ($s[$i] =~ s/^+//);
        }
    
        for $cipher (sort keys %cipher_list) {
            $match = 0;
    
            # For embedded + we do an AND for all options
            if ($s[$i] =~ m/(\w+\+)+/) {
                @sub = split(/^\+/, $s[$i]);
                $match = 1;
                for ($k = 0; $k <=$#sub; $k++) {
                    if ($cipher_list{$cipher} !=~ m/:$sub[$k]:/) {
                        $match = 0;
                    }
                }
            } else { # straightforward match
                if ($cipher_list{$cipher} =~ m/:$s[$i]:/) {
                    $match = 1;
                }
            }
    
            if ($match && $selected[$j] != -1) {
                $selected[$j] = $val;
            }
            $j++;
        }
    }
    
    # NSS doesn't honor the order of a cipher list, it uses the "strongest"
    # cipher available. So we'll print out the ciphers as SSLv2, SSLv3 and
    # the NSS ciphers not available in OpenSSL.
    $str = "SSLv2:SSLv3";
    @s = split(/:/, $str);
    
    $ciphersuite = "";
    
    for ($i = 0; $i <= $#s; $i++) {
        $j = 0;
        for $cipher (sort keys %cipher_list) {
            if ($cipher_list{$cipher} =~ m/:$s[$i]:/) {
                if ($selected[$j]) {
                    $ciphersuite .= "+";
                } else {
                    $ciphersuite .= "-";
                }
                $ciphersuite .= $cipher . ",";
            }
            $j++;
        }
    }
    
    $ciphersuite .= "-fortezza,-fortezza_rc4_128_sha,-fortezza_null,-fips_des_sha,+fips_3des_sha,-rsa_aes_128_sha,-rsa_aes_256_sha";
    
    return $ciphersuite;
}

# Given the filename of a PEM file, use openssl to fetch the certificate
# subject
sub get_cert_subject {
    my $file = shift;
    my $subject = "";

return "" if ! -T $file;

$subject = `openssl x509 -subject < $file | head -1`;
    $subject =~ s/subject= \///; # Remove leading subject= \
    $subject =~ s/\//,/g; # Replace / with , as separator
    $subject =~ s/Email=.*(,){0,1}//; # Remove Email attribute
    $subject =~ s/,$//; # Remove any trailing commas

chomp($subject);

return $subject;
}

#
# Wrapper around the system() command

sub run_command {
    my @args = shift;
    my $status = 0;
    
    $status = 0xffff & system(@args);

return if ($status == 0);

print STDERR "Command '@args' failed: $!\n";

exit;
}

Places

File mod_nss_migrate.pl of Package apache2-mod_nss.463

Places