File cups-filters.spec of Package cups-filters.743

Overview Repositories Revisions Requests Users Attributes Meta

File cups-filters.spec of Package cups-filters.743

#
# spec file for package cups-filters
#
# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

Summary:        OpenPrinting CUPS filters, backends, and cups-browsed
License:        GPL-2.0 and GPL-2.0+ and GPL-3.0 and MIT
Group:          Hardware/Printing
Url:            http://www.linuxfoundation.org/collaborate/workgroups/openprinting/pdf_as_standard_print_job_format
# For a breakdown of the licensing, see COPYING file
# GPLv2:   filters: commandto*, imagetoraster, pdftops, rasterto*,
#                   imagetopdf, pstopdf, texttopdf
#         backends: parallel, serial
# GPLv2+:  filters: textonly, texttops, imagetops
# GPLv3:   filters: bannertopdf
# MIT:     filters: pdftoijs, pdftoopvp, pdftopdf, pdftoraster
Name:           cups-filters
# Normal version for official cups-filters releases is the upstream version (e.g. "Version: 1.0.49").
# For a current tarball cups-filters-1.0-yyyymmdd.tar.gz (e.g. cups-filters-1.0-20140326.tar.gz)
# the current tarball's date is added to the version to ensure a strictly increasing sequence
# "last version" < "current version" < "next version" e.g. "1.0.49" < "1.0.49.20140326" < "1.0.50"
# to verify this run: zypper vcmp 'last version' 'current version'
#       and also run: zypper vcmp 'next version' 'current version'
# e.g. zypper vcmp '1.0.49' '1.0.49.20140326' -> 1.0.49 is older than 1.0.49.20140326
#  and zypper vcmp '1.0.50' '1.0.49.20140326' -> 1.0.50 is newer than 1.0.49.20140326
Version:        1.0.58
Release:        0
# tarball_version is used below to specify the directory via "setup -n":
# Special tarball_version needed for current cups-filters e.g. "define tarball_version 9.10rc1".
# For official cups-filters releases tarball_version and version are the same (i.e. "define tarball_version %{version}")
# Special tarball_version needed for current cups-filters e.g. "define tarball_version 9.10rc1".
%define tarball_version %{version}
Source0:        http://www.openprinting.org/download/cups-filters/cups-filters-%{tarball_version}.tar.gz
# Patch1 enhance_man_page_how_direct_mode_is_meant.diff makes it explicit in "man foomatic-rip"
# that its stand-alone spooler-less direct mode is meant only for testing and debugging,
# see https://bugzilla.opensuse.org/show_bug.cgi?id=915545#c11
# and https://bugs.linuxfoundation.org/show_bug.cgi?id=1253
Patch1:         enhance_man_page_how_direct_mode_is_meant.diff
# Patch2 cups-filters-1.0.58-CVE-2015-2265.patch is a diff of the remove_bad_chars() function
# between cups-filters-1.0.58 and cups-filters-1.0.66 where CVE-2015-2265 is fixed
# see https://bugzilla.opensuse.org/show_bug.cgi?id=921753
# and https://bugs.linuxfoundation.org/show_bug.cgi?id=1265
Patch2:         cups-filters-1.0.58-CVE-2015-2265.patch
# Patch3 cups-filters-1.0.58-CVE-2015-3258-CVE-2015-3279.patch is a diff
# of textcommon.c and texttopdf.c between cups-filters-1.0.58 and cups-filters-1.0.71
# where CVE-2015-3258 and CVE-2015-3279 are fixed (bsc#936281 and bsc#937018)
# cf. http://bzr.linuxfoundation.org/loggerhead/openprinting/cups-filters/revision/7365
Patch3:         cups-filters-1.0.58-CVE-2015-3258-CVE-2015-3279.patch
# Since cups-filters version 1.0.42 foomatic-rip is also provided by cups-filters.
# The foomatic-rip version that is provided by cups-filters is not specified in the cups-filters sources
# but on http://www.openprinting.org/download/foomatic/ the foomatic-filters-4.0-current.tar.gz
# dated 27-Mar-2014 (i.e. from today as of this writing) contains a VERSION.full file that reads "4.0.17.256"
# so that foomatic_rip_version (macro name can be only alphanumeric and '_' i.e. "foomatic-rip_version" does not work)
# is defined here accordingly but with one more additional trailing number '.1' to ensure that
# the sub-package cups-filters-foomatic-rip (see below) conflicts with any foomatic-filters package:
#   zypper vcmp '4.0.17.256' '4.0.17.256.1' -> 4.0.17.256 is older than 4.0.17.256.1
#   zypper vcmp '4.0.17.257' '4.0.17.256.1' -> 4.0.17.257 is newer than 4.0.17.256.1
%define foomatic_rip_version 4.0.17.256.1
BuildRequires:  cups-devel
BuildRequires:  pkgconfig
# pdftopdf
BuildRequires:  qpdf-devel
# pdftops
BuildRequires:  poppler-tools
# pdftoijs, pdftoopvp, pdftoraster
BuildRequires:  ghostscript-mini-devel
BuildRequires:  libjpeg-devel
BuildRequires:  libpng-devel
BuildRequires:  libpoppler-cpp0
BuildRequires:  libpoppler-devel
BuildRequires:  libpoppler-glib-devel
BuildRequires:  libtiff-devel
BuildRequires:  zlib-devel
# libijs
BuildRequires:  fontconfig-devel
BuildRequires:  freetype2-devel
BuildRequires:  liblcms2-devel
# Make sure we get postscriptdriver tags.
BuildRequires:  python-cups
# cups-browsed
# "BuildRequires libavahi-devel" is insufficient
# (build fails at configure "checking for AVAHI_GLIB")
# "BuildRequires libavahi-gobject-devel" is too much
# (libavahi-gobject-devel requires libavahi-glib-devel and libavahi-devel)
# "BuildRequires libavahi-glib-devel" is sufficient
# (libavahi-glib-devel requires libavahi-devel)
BuildRequires:  libavahi-glib-devel
# autogen.sh
BuildRequires:  autoconf
BuildRequires:  automake
BuildRequires:  gcc-c++
BuildRequires:  glibc-devel
BuildRequires:  libtool
BuildRequires:  systemd
%systemd_requires
# test requires
BuildRequires:  dejavu-fonts
# Because gstoraster is linked with libcupsfilters.so
# that library is in the cups-filters-ghostscript sub-package
# (see the cups-filters-ghostscript sub-package file section).
# But many other filters in the cups-filters main package are also
# linked with with libcupsfilters.so so that the cups-filters main package
# requires the cups-filters-ghostscript sub-package. To be on the safe side explicitly
# require the exact matching version-release of the cups-filters-ghostscript sub-package
# because all cups-filters software is built from one same source tar ball
# and there could be whatever subtle internal dependencies.
# The exact matching version-release of the cups-filters-ghostscript sub-package is available
# on the same package repository where the cups-filters main package is because
# all are built simulaneously from the same cups-filters source package
# and all required packages are provided on the same repository:
Requires:       cups-filters-ghostscript = %{version}-%{release}
# For SLE12 we provide the last traditional CUPS version 1.5.4
# as "cups154" RPMs in the SLE12 "legacy" module.
# In CUPS 1.5.4 for SLE12 we have split those filters, backends, and banners
# from CUPS 1.5.4 into a cups154-filters sub-package so that CUPS 1.5.4
# can be installed without cups154-filters and instead with cups-filters.
# Conflicts with any version of the cups154-filters package (this package is cups-filters)
# because the cups154-filters package provides many same files:
Conflicts:      cups154-filters
# When a user installs the cups-filters main package, he usually expects
# to get "the whole cups-filters stuff" installed (i.e. also all sub-packages).
# To be on the safe side recommend the exact matching version-release
# of the cups-filters sub-packages because all cups-filters software
# is built from one same source tar ball and there could be whatever subtle internal dependencies.
# The exact matching version-release of the cups-filters sub-packages are available
# on the same package repository where the cups-filters main package is because
# all are built simulaneously from the same cups-filters source package
# and all required packages are provided on the same repository:
Recommends:     cups-filters-foomatic-rip = %{version}-%{release}
Recommends:     cups-filters-cups-browsed = %{version}-%{release}
# /usr/bin/pdftops (provided by poppler-tools)
# is needed (but not required for non-PostScript printers)
# to print PDFs on PostScript printers because in this case
# the CUPS filter chain is:
#  /usr/lib/cups/filter/pdftopdf
#  /usr/lib/cups/filter/pdftops
#  where /usr/lib/cups/filter/pdftops calls /usr/bin/pdftops
#  /usr/lib/cups/backend/...
# see https://bugzilla.novell.com/show_bug.cgi?id=868148
Recommends:     poppler-tools

%description
Contains backends, filters, and other software
that was once part of the core CUPS distribution
but is no longer maintained by Apple Inc.
In addition it contains additional filters
and software developed independently of Apple,
especially filters for the PDF-centric printing
workflow introduced by OpenPrinting and a daemon
to browse broadcasts of remote CUPS printers
and makes these printers available locally.

%package ghostscript
Summary:        OpenPrinting CUPS filters for Ghostscript
Group:          Hardware/Printing
# Provide the well known generic name "gstoraster" so that it is easier for users
# to find or install the RPM package name "cups-filters-ghostscript" that actually provides it
# e.g. via "zypper search gstoraster" or "zypper install gstoraster":
Provides:       gstoraster

%description ghostscript
Since Ghostscript version 9.10 the CUPS filters
gstoraster and gstopxl are removed from Ghostscript.
Those filters are now provided by cups-filters
(a free software package hosted by OpenPrinting).
The binary RPM sub-package cups-filters-ghostscript
provides only those CUPS filters for Ghostscript.
This way cups-filters-ghostscript can be used
with the traditional CUPS up to version 1.5
where the other filters, backends, and cups-browsed
from cups-filters would cause conflicts because
CUPS <= 1.5 already provides them. In contrast
for CUPS versions since 1.6 the whole cups-filters
is usually needed (but not strictly required).

%package foomatic-rip
Summary:        OpenPrinting CUPS filter foomatic-rip
Group:          Hardware/Printing
# Because gstoraster is linked with libcupsfilters.so
# that library is in the cups-filters-ghostscript sub-package
# (see the cups-filters-ghostscript sub-package file section).
# But foomatic-rip is also linked with libcupsfilters.so
# so that the cups-filters-foomatic-rip sub-package requires
# the cups-filters-ghostscript sub-package. To be on the safe side explicitly
# require the exact matching version-release of the cups-filters-ghostscript sub-package
# because all cups-filters software is built from one same source tar ball
# and there could be whatever subtle internal dependencies.
# The exact matching version-release of the cups-filters-ghostscript sub-package is available
# on the same package repository where the cups-filters main package is because
# all are built simulaneously from the same cups-filters source package
# and all required packages are provided on the same repository:
Requires:       cups-filters-ghostscript = %{version}-%{release}
# Provide the well known generic name "foomatic-rip" so that it is easier for users
# to find or install the RPM package name "cups-filters-foomatic-rip" that actually provides it
# e.g. via "zypper search foomatic-rip" or "zypper install foomatic-rip":
Provides:       foomatic-rip
# Provide foomatic-filters with the exact foomatic_rip_version
# see https://bugzilla.novell.com/show_bug.cgi?id=870621
# and conflict with any other foomatic-filters version because
# the following files are also provided by foomatic-filters
# /usr/lib/cups/filter/foomatic-rip
# /usr/share/man/man1/foomatic-rip
Conflicts:      foomatic-filters < %{foomatic_rip_version}
Provides:       foomatic-filters = %{foomatic_rip_version}
Conflicts:      foomatic-filters > %{foomatic_rip_version}

%description foomatic-rip
Since cups-filters version 1.0.42 foomatic-rip is also
provided by cups-filters so that there is a file conflict
with the foomatic-filters package (both provide
/usr/lib/cups/filter/foomatic-rip and
/usr/share/man/man1/foomatic-rip). Therefore foomatic-rip
is separated in the sub-package cups-filters-foomatic-rip
and only that sub-package conflicts with foomatic-filters.

%package cups-browsed
Summary:        OpenPrinting cups-browsed for CUPS Browsing
Group:          Hardware/Printing
# Do not conflict with CUPS < 1.6 regardless that up to CUPS 1.5.4
# the CUPS Browsing functionality is provided by the cupsd
# because it can be disabled for the cupsd up to CUPS 1.5.4.
# Provide the well known generic name "cups-browsed" so that it is easier for users
# to find or install the RPM package name "cups-filters-cups-browsed" that actually provides it
# e.g. via "zypper search cups-browsed" or "zypper install cups-browsed":
Provides:       cups-browsed

%description cups-browsed
Since CUPS >= 1.6 the CUPS Browsing functionality
is dropped in CUPS. The OpenPrinting cups-browsed
is a daemon running in parallel to the CUPS daemon
to provide again basic CUPS Browsing functionality.
This way basic CUPS Browsing works on clients
with CUPS >= 1.6 when there are remote CUPS servers
of CUPS version 1.5 and older in the network.
For each reported remote CUPS queue cups-browsed creates
a local raw queue pointing to the remote queue so that
it appears in local print dialogs and is also available
for printing via the command line.
Also high availability with redundant print servers is
supported. If there is more than one server providing
a print queue with the same name, cups-browsed uses the
first queue which appears and if this queue disappears,
cups-browsed switches to the queue of another server.
Load-balancing (what CUPS <= 1.5 did via implicit classes)
is not supported with cups-browsed.

%package devel
Summary:        Development files for cups-filters
Group:          Development/Libraries/C and C++
Requires:       %{name} = %{version}
# Conflict with cups-devel < 1.6 because up to CUPS 1.5.4
# the following files are provided by the cups-devel package
# /usr/share/cups/ppdc/escp.h
# /usr/share/cups/ppdc/pcl.h
Conflicts:      cups-devel < 1.6
# For SLE12 we provide CUPS 1.5.4 under RPM package name "cups154":
Conflicts:      cups154-devel

%description devel
This package contains the development files for cups-filters.

%prep
# Be quiet when unpacking and use a directory name matching Source0:
%setup -q -n cups-filters-%{tarball_version}
# Patch1 enhance_man_page_how_direct_mode_is_meant.diff makes it explicit in "man foomatic-rip"
# that its stand-alone spooler-less direct mode is meant only for testing and debugging,
# see https://bugzilla.opensuse.org/show_bug.cgi?id=915545#c11
# and https://bugs.linuxfoundation.org/show_bug.cgi?id=1253
%patch1
# Patch2 cups-filters-1.0.58-CVE-2015-2265.patch is a diff of the remove_bad_chars() function
# between cups-filters-1.0.58 and cups-filters-1.0.66 where CVE-2015-2265 is fixed
# see https://bugzilla.opensuse.org/show_bug.cgi?id=921753
# and https://bugs.linuxfoundation.org/show_bug.cgi?id=1265
%patch2
# Patch3 cups-filters-1.0.58-CVE-2015-3258-CVE-2015-3279.patch is a diff
# of textcommon.c and texttopdf.c between cups-filters-1.0.58 and cups-filters-1.0.71
# where CVE-2015-3258 and CVE-2015-3279 are fixed (bsc#936281 and bsc#937018)
# cf. http://bzr.linuxfoundation.org/loggerhead/openprinting/cups-filters/revision/7365
%patch3 -p1

%build
# Just do what is described in the upstream INSTALL file
# unless there is a really good reason not to do it this way
# and then it is probably worth submitting an upstream issue report to
# https://bugs.linuxfoundation.org for "Product: OpenPrinting" and "Component: cups-filters"
./autogen.sh
# No need to set our preferred architecture-specific flags for the compiler and linker
# via export CFLAGS="$RPM_OPT_FLAGS" and export CXXFLAGS="$RPM_OPT_FLAGS"
# because the RPM macro configure does that.
# --with-pdftops=pdftops - use Poppler instead of Ghostscript (see README)
%configure --disable-static \
           --disable-silent-rules \
           --enable-shared \
           --enable-imagefilters \
           --with-pdftops=pdftops \
           --with-browseremoteprotocols=DNSSD,CUPS \
           --without-php \
	   --with-rcdir=no \
	   --with-test-font-path=/usr/share/fonts/truetype/DejaVuSans.ttf
# At least for now - until an expert may have had a look - using plain make
# instead of make with _smp_mflags because that caused sometimes strange build failures:
make

%check
# At least for now - until an expert may have had a look - using plain make
# instead of make with _smp_mflags because that caused sometimes strange build failures:
make check

%install
make install DESTDIR=%{buildroot}
# LSB requires /usr/bin/foomatic-rip only future LSB will require /usr/lib/cups/filter/foomatic-rip
# see https://lsbbugs.linuxfoundation.org/show_bug.cgi?id=3900
# so that a /usr/bin/foomatic-rip -> /usr/lib/cups/filter/foomatic-rip symlink is added
# to our cups-filters-foomatic-rip sub-package to make the lsb RPM installable again
# see https://bugzilla.novell.com/show_bug.cgi?id=892604
ln -s /usr/lib/cups/filter/foomatic-rip %{buildroot}%{_bindir}/foomatic-rip
# As band-aid for now remove the "# BrowseAllow cups.example.com" example line in cups-browsed.conf
# because currently hostnames do not work, see https://bugs.linuxfoundation.org/show_bug.cgi?id=1205
if grep -q '^# BrowseAllow cups.example.com' %{buildroot}%{_sysconfdir}/cups/cups-browsed.conf
then sed -i -e '/^# BrowseAllow cups.example.com/d' %{buildroot}%{_sysconfdir}/cups/cups-browsed.conf
else echo "No longer '# BrowseAllow cups.example.com' in cups-browsed.conf - clean up cups-filters.spec"
     exit 9
fi
# https://fedoraproject.org/wiki/Packaging_tricks#With_.25doc
mkdir __doc
mv %{buildroot}%{_datadir}/doc/cups-filters/* __doc
rm -r %{buildroot}%{_datadir}/doc/cups-filters
mv fontembed/README __doc/fontembed.README
# Install the cups-browsed.service systemd unit file from the upstream sources:
mkdir -p %{buildroot}%{_unitdir}
install -p -m 644 utils/cups-browsed.service %{buildroot}%{_unitdir}
# Provide SUSE policy symlink /usr/sbin/rcFOO -> /etc/init.d/FOO
# /usr/sbin/service exists only since openSUSE 12.3:
%if 0%{?suse_version} > 1220
ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rccups-browsed
%else
ln -s /sbin/service %{buildroot}%{_sbindir}/rccups-browsed
%endif
# Don't ship libtool la files.
rm -f %{buildroot}%{_libdir}/lib*.la
# Not sure what is this good for
rm -f %{buildroot}%{_bindir}/ttfread

%pre
# Remove /usr/share/cups/mime/cupsfiltersgstoraster.convs in any case
# (it is no error when it does not exist) to not leave outdated MIME conversion rules because
# the cups-filters main package provides all MIME conversion rules for the PDF printing workflow
# in /usr/share/cups/mime/cupsfilters.convs (see "pre ghostscript" scriptlet).
rm -f %{_datadir}/cups/mime/cupsfiltersgstoraster.convs
exit 0

%post
/sbin/ldconfig
exit 0

%postun
/sbin/ldconfig
# When the files of the cups-filters main package have been removed
# in particular /usr/share/cups/mime/cupsfilters.convs has been removed
# that provided the MIME conversion rules for the PDF printing workflow.
# Reinstall the traditional MIME conversion rules for gstoraster in the same way
# as when cups-filters-ghostscript is installed (see "pre ghostscript" scriptlet).
# To be on the safe side do nothing when /usr/share/cups/mime/cupsfilters.convs exists.
# Do nothing when /usr/share/cups/mime/ does not exist (e.g. when CUPS is not installed).
if test -d %{_datadir}/cups/mime/
then test -e %{_datadir}/cups/mime/cupsfilters.convs && exit 0
     GSTORASTERCONVS="%{_datadir}/cups/mime/cupsfiltersgstoraster.convs"
     echo '# traditional CUPS <= 1.5.4 MIME conversion rules for gstoraster' >$GSTORASTERCONVS
     echo 'application/vnd.cups-pdf application/vnd.cups-raster 66 gstoraster' >>$GSTORASTERCONVS
     echo 'application/vnd.cups-postscript application/vnd.cups-raster 100 gstoraster' >>$GSTORASTERCONVS
fi
exit 0

%pre ghostscript
# The CUPS filter gstoraster requires matching MIME conversion rules for CUPS
# otherwise CUPS would not know when to use the gstoraster filter.
# The cups-filters main package contains them in /usr/share/cups/mime/cupsfilters.convs
# but this contains all MIME conversion rules for the PDF printing workflow
# that is used for CUPS since version 1.6 but not for traditional CUPS <= 1.5.4.
# The cups-filters-ghostscript sub-package is explicitly intended to be also used for
# traditional CUPS <= 1.5.4 (see the cups-filters-ghostscript sub-package description)
# so that we need to provide MIME conversion rules for gstoraster in a special
# separated file /usr/share/cups/mime/cupsfiltersgstoraster.convs
# that is removed when the cups-filters main package is installed (see "pre" scriptlet).
# To be on the safe side do nothing when /usr/share/cups/mime/cupsfilters.convs exists.
# Do nothing when /usr/share/cups/mime/ does not exist (e.g. when CUPS is not installed).
if test -d %{_datadir}/cups/mime/
then test -e %{_datadir}/cups/mime/cupsfilters.convs && exit 0
     GSTORASTERCONVS="%{_datadir}/cups/mime/cupsfiltersgstoraster.convs"
     echo '# traditional CUPS <= 1.5.4 MIME conversion rules for gstoraster' >$GSTORASTERCONVS
     echo 'application/vnd.cups-pdf application/vnd.cups-raster 66 gstoraster' >>$GSTORASTERCONVS
     echo 'application/vnd.cups-postscript application/vnd.cups-raster 100 gstoraster' >>$GSTORASTERCONVS
fi
exit 0

%post ghostscript
/sbin/ldconfig
exit 0

%postun ghostscript
/sbin/ldconfig
# Remove /usr/share/cups/mime/cupsfiltersgstoraster.convs (see "pre ghostscript" scriptlet) in any case
# (it is no error when it does not exist) to not leave files behind after the package was removed:
rm -f %{_datadir}/cups/mime/cupsfiltersgstoraster.convs
exit 0

%pre cups-browsed
%service_add_pre cups-browsed.service
exit 0

%post cups-browsed
%service_add_post cups-browsed.service
exit 0

%preun cups-browsed
%service_del_preun cups-browsed.service
exit 0

%postun cups-browsed
%service_del_preun cups-browsed.service
exit 0

%files
# The files sections list all mandatory files explicitly one by one.
# In particular all executables are listed explicitly.
# This avoids that whatever configure magic might silently
# not build and install an executable when whatever condition
# for configure's automated tests is not fulfilled in the build system,
# (cf. https://bugzilla.novell.com/show_bug.cgi?id=526847#c9).
# When all mandatory files are explicitly listed,
# the build fails intentionally if a mandatory file was not built
# which ensures that already existing correctly built binary RPMs
# are not overwritten by broken RPMs where mandatory files are missing.
%defattr(-,root,root)
%doc __doc/README __doc/AUTHORS __doc/NEWS __doc/COPYING __doc/fontembed.README
%config(noreplace) %{_sysconfdir}/fonts/conf.d/99pdftoopvp.conf
%dir /usr/lib/cups
%dir /usr/lib/cups/backend
%attr(0755,root,root) /usr/lib/cups/backend/parallel
# Serial backend needs to run as root
# see https://bugzilla.redhat.com/show_bug.cgi?id=212577#c4
%attr(0700,root,root) /usr/lib/cups/backend/serial
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/bannertopdf
%attr(0755,root,root) /usr/lib/cups/filter/commandtoescpx
%attr(0755,root,root) /usr/lib/cups/filter/commandtopclx
%attr(0755,root,root) /usr/lib/cups/filter/imagetopdf
%attr(0755,root,root) /usr/lib/cups/filter/imagetops
%attr(0755,root,root) /usr/lib/cups/filter/imagetoraster
%attr(0755,root,root) /usr/lib/cups/filter/pdftoijs
%attr(0755,root,root) /usr/lib/cups/filter/pdftoippprinter
%attr(0755,root,root) /usr/lib/cups/filter/pdftoopvp
%attr(0755,root,root) /usr/lib/cups/filter/pdftopdf
%attr(0755,root,root) /usr/lib/cups/filter/pdftops
%attr(0755,root,root) /usr/lib/cups/filter/pdftoraster
%attr(0755,root,root) /usr/lib/cups/filter/pstopdf
%attr(0755,root,root) /usr/lib/cups/filter/rastertoescpx
%attr(0755,root,root) /usr/lib/cups/filter/rastertopclx
%attr(0755,root,root) /usr/lib/cups/filter/rastertopdf
%attr(0755,root,root) /usr/lib/cups/filter/textonly
%attr(0755,root,root) /usr/lib/cups/filter/texttopdf
%attr(0755,root,root) /usr/lib/cups/filter/texttops
%attr(0755,root,root) /usr/lib/cups/filter/urftopdf
%dir %{_datadir}/cups
%{_datadir}/cups/banners
%{_datadir}/cups/charsets
%dir %{_datadir}/cups/data
%{_datadir}/cups/data/*
%dir %{_datadir}/cups/drv
%{_datadir}/cups/drv/cupsfilters.drv
%dir %{_datadir}/cups/mime
%{_datadir}/cups/mime/cupsfilters.types
%{_datadir}/cups/mime/cupsfilters.convs
%dir %{_datadir}/ppd
%{_datadir}/ppd/cupsfilters
%{_libdir}/libfontembed.so.*

%files ghostscript
# "ldd /usr/lib/cups/filter/gstoraster | grep cups" shows that
# gstoraster is linked with /usr/lib/libcupsfilters.so.* so that
# it must be in the cups-filters-ghostscript sub-package to ensure
# the cups-filters-ghostscript sub-package can be installed on its own
# without a RPM requirement for the cups-filters main package
# which would cause file conflicts with CUPS <= 1.5.4
# see the cups-filters-ghostscript sub-package description.
# /usr/lib/cups/filter/gstopxl is a bash script.
%defattr(-,root,root)
%dir /usr/lib/cups
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/gstoraster
%attr(0755,root,root) /usr/lib/cups/filter/gstopxl
%{_libdir}/libcupsfilters.so.*

%files foomatic-rip
%defattr(-,root,root)
%dir /usr/lib/cups
%dir /usr/lib/cups/filter
%attr(0755,root,root) /usr/lib/cups/filter/foomatic-rip
%{_bindir}/foomatic-rip
%{_mandir}/man1/foomatic-rip.1.gz

%files cups-browsed
%defattr(-,root,root)
%config(noreplace) %{_sysconfdir}/cups/cups-browsed.conf
%{_sbindir}/cups-browsed
%{_sbindir}/rccups-browsed
%{_unitdir}/cups-browsed.service
%{_mandir}/man5/cups-browsed.conf.5.gz
%{_mandir}/man8/cups-browsed.8.gz

%files devel
%defattr(-,root,root)
%dir %{_datadir}/cups/ppdc
%{_datadir}/cups/ppdc/pcl.h
%{_datadir}/cups/ppdc/escp.h
%{_libdir}/libcupsfilters.so
%{_libdir}/libfontembed.so
%{_libdir}/pkgconfig/libcupsfilters.pc
%{_libdir}/pkgconfig/libfontembed.pc
%{_includedir}/cupsfilters
%{_includedir}/fontembed

%changelog

Places

File cups-filters.spec of Package cups-filters.743

Places