File glibc-utils.spec of Package glibc-testsuite.4524

Overview Repositories Revisions Requests Users Attributes Meta

File glibc-utils.spec of Package glibc-testsuite.4524

#
# spec file for package glibc-utils
#
# Copyright (c) 2017 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via http://bugs.opensuse.org/
#

# PLEASE run pre_checkin.sh in this directory before submitting
# this package. Otherwise the .spec and .changes for glibc-testsuite
# and glibc-utils aren't updated.

# Run with osc --with=fast_build to have a shorter turnaround
# It will avoid building some parts of glibc
%bcond_with    fast_build

%define crypt_bf_version 1.3

Name:           glibc-utils
%define normal_build ("%{name}" == "glibc")
%define utils_build ("%{name}" == "glibc-utils")
%define testsuite_build ("%{name}" == "glibc-testsuite")
Summary:        Development utilities from GNU C library
License:        LGPL-2.1+
Group:          Development/Languages/C and C++
BuildRequires:  audit-devel
BuildRequires:  fdupes
BuildRequires:  libcap-devel
BuildRequires:  libselinux-devel
BuildRequires:  makeinfo
BuildRequires:  pwdutils
BuildRequires:  systemd-rpm-macros
BuildRequires:  xz
%if %{testsuite_build}
BuildRequires:  gcc-c++
BuildRequires:  libstdc++-devel
%endif
%if %{utils_build}
BuildRequires:  gd-devel
%endif

%define __filter_GLIBC_PRIVATE 1
%ifarch i686
# For i686 let's only build what's different from i586, so
# no need to build documentation
%define build_profile 1
%define build_locales 1
%define build_html 0
%else
%if %{with fast_build} || %{utils_build}
%define build_profile 0
%define build_locales 0
%define build_html 0
%else
# Default:
%define build_profile 1
%define build_locales 1
%define build_html 1
%endif
%endif

%define build_variants %{normal_build}

%define disable_assert 0
%define enable_stackguard_randomization 1
%ifarch ppc ppc64
 %define optimize_power 1
 %ifarch ppc
 %define powerpc_optimize_base %{nil}
 %define powerpc_optimize_tune power3
 %define powerpc_optimize_cpu_power4 1
 %else
 %define powerpc_optimize_base %{nil}
 %define powerpc_optimize_tune power5
 %define powerpc_optimize_cpu_power4 0
 %endif
 # We are not building Power CPU specific optimizations for openSUSE.
 %define powerpc_optimize_cpu_power6 0
 %define powerpc_optimize_cpu_power7 0
 %define powerpc_optimize_cpu_cell 0
%else
 %define optimize_power 0
 %define powerpc_optimize_base %{nil}
 %define powerpc_optimize_cpu_power4 0
 %define powerpc_optimize_cpu_power6 0
 %define powerpc_optimize_cpu_power7 0
 %define powerpc_optimize_cpu_cell 0
%endif # ppc, ppc64
# 3.0 is the SLES 11 SP3 kernel
# 3.1 is the openSUSE 12.1 kernel
%define enablekernel 3.0

Version:        2.22
Release:        0
%define git_id bbab82c25da9
Url:            http://www.gnu.org/software/libc/libc.html
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
#Source:         glibc-%{version}-%{git_id}.tar.xz
Source:         http://ftp.gnu.org/pub/gnu/glibc/glibc-%{version}.tar.xz
Source1:        http://ftp.gnu.org/pub/gnu/glibc/glibc-%{version}.tar.xz.sig
Source2:        glibc.keyring
Source3:        noversion.tar.bz2
Source4:        manpages.tar.bz2
Source5:        nsswitch.conf
Source7:        bindresvport.blacklist
Source8:        glibc_post_upgrade.c
Source9:        glibc.rpmlintrc
Source10:       baselibs.conf
# For systemd 
Source20:       nscd.conf
Source21:       nscd.service
# crypt_blowfish
Source50:       http://www.openwall.com/crypt/crypt_blowfish-%{crypt_bf_version}.tar.gz
# The sign key uses MD5 which is no longer accepted by gpg
#Source51:       http://www.openwall.com/crypt/crypt_blowfish-%{crypt_bf_version}.tar.gz.sign

%if %{normal_build}
# ngpt was used in 8.1 and SLES8
Obsoletes:      ngpt < 2.2.2
Obsoletes:      ngpt-devel < 2.2.2
Provides:       ngpt = 2.2.2
Provides:       ngpt-devel = 2.2.2
Conflicts:      kernel < %{enablekernel}
# bug437293 - handle update from SLES10 on PowerPC
%ifarch ppc64
Obsoletes:      glibc-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-32bit
%endif
%ifarch armv6hl armv7hl
# The old runtime linker link gets not provided by rpm find.provides, but it exists
Provides:       ld-linux.so.3
Provides:       ld-linux.so.3(GLIBC_2.4)
%endif
Requires(pre):  filesystem
Recommends:     glibc-extra
Provides:       rtld(GNU_HASH)
%endif # %{normal_build}
%if %{utils_build}
Requires:       glibc = %{version}
%endif
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
%ifarch i686
# We need to avoid to have only the src rpm from i686 on the media,
# since it does not work on other architectures.
NoSource:       0
%endif
#

###
# Patches are ordered in the following groups:
# Patches that we will never upstream or which have not been looked at: 0-999
# Patches taken from upstream: 1000-2000
# Patches that are going upstream, waiting approval: 2000-3000
###

###
# Patches that upstream will not accept
###

###
# openSUSE specific patches - won't go upstream
###
### openSUSE extensions, configuration
# PATCH-FEATURE-OPENSUSE -- add crypt_blowfish support - bnc#700876
Patch1:         glibc-2.14-crypt.diff
# PATCH-FEATURE-OPENSUSE constify crypt_blowfish
Patch2:         crypt_blowfish-const.patch
# PATCH-FEATURE-OPENSUSE -- add sha support to crypt_blowfish lnussel@suse.de
Patch3:         crypt_blowfish-1.2-sha.diff
# PATCH-FEATURE-OPENSUSE Move crypt_gensalt_rn to separate library
Patch4:         crypt_blowfish-gensalt.patch
# PATCH-FEATURE-OPENSUSE Avoid build failure on noexecstack marker on ARM dmueller@suse.de
Patch5:         crypt_blowfish-1.2-hack_around_arm.diff
# PATCH-FIX-OPENSUSE Fix path for nscd databases
Patch6:         glibc-2.3.3-nscd-db-path.diff
# PATCH-FIX-OPENSUSE Fix path for nss_db (bnc#753657) - aj@suse.de
Patch7:         nss-db-path.patch
# PATCH-FIX-OPENSUSE adjust nscd.conf
Patch8:         glibc-nscd.conf.patch
# PATCH-FIX-OPENSUSE do not use compile time in binaries
Patch9:         glibc-nodate.patch
# PATCH-FIX-OPENSUSE -- add some extra information to version output - kukuk@suse.de
Patch10:        glibc-version.diff
# PATCH-FIX-OPENSUSE remove lfs test from testsuite aj@suse.de
Patch11:        glibc-testsuite.patch
# PATCH-FIX-OPENSUSE handle old glibc binaries
Patch12:        glibc-2.3.90-noversion.diff
# PATCH-FIX-OPENSUSE -- Make --no-archive default for localedef - kukuk@suse.de
Patch13:        glibc-2.3.2.no_archive.diff
# PATCH-FIX-OPENSUSE -- add blacklist for bindresvport
Patch14:        glibc-bindresvport-blacklist.diff
# PATCH-FIX-OPENSUSE prefer -lang rpm packages
Patch15:        glibc-2.3.90-langpackdir.diff
# PATCH-FEATURE-SLE increase cpusetsize to 4096, needs to be kept for compatibility kukuk@suse.de (XXX: Review)
Patch18:        glibc-cpusetsize.diff
# PATCH-FEATURE-SLE Use nscd user for nscd
Patch19:        nscd-server-user.patch
# PATCH-FEATURE-SLE Disable warning about deprecated _BSD_SOURCE/_SVID_SOURCE
Patch20:        default-source-warning.patch
# PATCH-FEATURE-SLE powerpc: enable TLE only if GLIBC_ELISION_ENABLE=yes is defined
Patch21:        powerpc-elision-enable-envvar.patch

### Locale related patches
# PATCH-FIX-OPENSUSE Add additional locales
Patch100:       glibc-2.3.locales.diff.bz2
# PATCH-FIX-OPENSUSE -- Add no_NO back (XXX: Still needed?)
Patch102:       glibc-2.4.90-no_NO.diff
# PATCH-FIX-OPENSUSE -- Renames for China
Patch103:       glibc-2.4-china.diff
# PATCH-FIX-OPENSUSE -- Add C.UTF-8 locale
Patch104:       glibc-c-utf8-locale.patch
# PATCH-FIX-OPENSUSE -- Disable gettext for C.UTF-8 locale
Patch105:       glibc-disable-gettext-for-c-utf8.patch

### Broken patches in glibc that we revert for now:

### Network related patches
# PATCH-FIX-OPENSUSE reload /etc/resolv.conf on change
Patch300:       glibc-resolv-reload.diff
# PATCH-FIX-OPENSUSE Fix hangs in UDP RPC calls bso#5379 bnc#257745 aj@suse.de
Patch301:       glibc-2.2-sunrpc.diff
# PATCH-FIX-OPENSUSE Warn about usage of mdns in resolv.conv
Patch304:       glibc-resolv-mdnshint.diff
# PATCH-FIX-OPENSUSE disable rewriting ::1 to 127.0.0.1 for /etc/hosts bnc#684534, bnc#706719
Patch306:       glibc-fix-double-loopback.diff

###
# Patches from upstream
###
# PATCH-FIX-UPSTREAM Clear DF_1_NODELETE flag only for failed to load library (BZ #18778)
Patch1000:      dont-remove-nodelete-flag.patch
# PATCH-FIX-UPSTREAM Readd O_LARGEFILE flag for openat64 (BZ #18781)
Patch1001:      openat64-readd-o-largefile.patch
# PATCH-FIX-UPSTREAM getmntent: fix memory corruption w/blank lines (BZ #18887)
Patch1002:      mntent-blank-line.patch
# PATCH-FIX-UPSTREAM Fix opendir inverted o_directory_works test (BZ #18921)
Patch1003:      opendir-o-directory-check.patch
# PATCH-FIX-UPSTREAM strcoll: Remove incorrect STRDIFF-based optimization (BZ #18589)
Patch1004:      strcoll-remove-strdiff-opt.patch
# PATCH-FIX-UPSTREAM Always enable pointer guard (BZ #18928)
Patch1005:      ld-pointer-guard.patch
# PATCH-FIX-UPSTREAM Harden tls_dtor_list with pointer mangling (BZ #19018)
Patch1006:      tls-dtor-list-mangling.patch
# PATCH-FIX-UPSTREAM PowerPC: Fix a race condition when eliding a lock (BZ #18743)
Patch1007:      powerpc-lock-elision-race.patch
# PATCH-FIX-UPSTREAM Keep only ELF_RTYPE_CLASS_{PLT|COPY} bits for prelink (BZ #19178)
Patch1008:      prelink-elf-rtype-class.patch
# PATCH-FIX-UPSTREAM Better workaround for aliases of *_finite symbols in vector math library (BZ# 19058)
Patch1009:      vector-finite-math-aliases.patch
# PATCH-FIX-UPSTREAM powerpc: Fix usage of elision transient failure adapt param (BZ #19174)
Patch1010:      powerpc-elision-adapt-param.patch
# PATCH-FIX-UPSTREAM Fix unbound alloca in catopen (CVE-2015-8779, BZ #17905)
Patch1011:      catopen-unbound-alloca.patch
# PATCH-FIX-UPSTREAM Add range check on time fields (CVE-2015-8776, BZ #18985)
Patch1012:      strftime-range-check.patch
# PATCH-FIX-UPSTREAM Handle overflow in hcreate (CVE-2015-8778, BZ #18240)
Patch1013:      hcreate-overflow-check.patch
# PATCH-FIX-UPSTREAM Don't do lock elision on an error checking mutex (BZ #17514)
Patch1014:      errorcheck-mutex-no-elision.patch
# PATCH-FIX-UPSTREAM Refactor strtod parsing of NaN payloads (CVE-2014-9761, BZ #16962)
Patch1015:      refactor-nan-parsing.patch
# PATCH-FIX-UPSTREAM Fix getaddrinfo stack-based buffer overflow (CVE-2015-7547, BZ #18665)
Patch1016:      send-dg-buffer-overflow.patch
# PATCH-FIX-UPSTREAM Fix isinf/isnan declaration conflict with C++11 (BZ #19439)
Patch1017:      isinf-cxx11-conflict.patch
# PATCH-FIX-UPSTREAM Don't use direct socket calls on s390x only available on 4.3+
Patch1018:      s390x-remove-direct-socket-calls.patch
# PATCH-FIX-UPSTREAM Support PLT and GOT references in local PIC check (BZ #19007)
Patch1019:      localplt.patch
# PATCH-FIX-UPSTREAM Avoid redundant shift character in iconv output at block boundary (BZ #17197)
Patch1020:      ibm93x-redundant-shift-si.patch
# PATCH-FIX-UPSTREAM Force rereading TZDEFRULES after it was used to set DST rules only (BZ #19253)
Patch1021:      tzset-tzname.patch
# PATCH-FIX-UPSTREAM Fix resource leak in resolver (BZ #19257)
Patch1022:      resolv-mem-leak.patch
# PATCH-FIX-UPSTREAM powerpc: Fix tabort usage in syscalls
Patch1023:      powerpc-tabort-usage.patch
# PATCH-FIX-UPSTREAM powerpc: Revert to default atomic ops in elision code
Patch1024:      powerpc-default-atomic-ops.patch
# PATCH-FIX-UPSTREAM powerpc: More elision improvements
Patch1025:      powerpc-elision-improvements.patch
# PATCH-FIX-UPSTREAM powerpc: Enforce compiler barriers on hardware transactions
Patch1026:      powerpc-htm-compiler-barriers.patch
# PATCH-FIX-UPSTREAM S390: optimized string/memory functions
Patch1027:      0004-S390-Fix-handling-of-DXC-byte-in-FPC-register.patch
Patch1028:      0005-S390-Refactor-ifunc-implementations-and-enable-ifunc.patch
Patch1029:      0006-S390-Add-hwcaps-value-for-vector-facility.patch
Patch1030:      0007-S390-Add-new-s390-platform.patch
Patch1031:      0008-S390-configure-check-for-vector-instruction-support-.patch
Patch1032:      0009-S390-Ifunc-resolver-macro-for-vector-instructions.patch
Patch1033:      0010-S390-Optimize-strlen-and-wcslen.patch
Patch1034:      0011-S390-Optimize-strnlen-and-wcsnlen.patch
Patch1035:      0012-S390-Optimize-strcpy-and-wcscpy.patch
Patch1036:      0013-S390-Optimize-stpcpy-and-wcpcpy.patch
Patch1037:      0014-S390-Optimize-strncpy-and-wcsncpy.patch
Patch1038:      0015-S390-Optimize-stpncpy-and-wcpncpy.patch
Patch1039:      0016-S390-Optimize-strcat-and-wcscat.patch
Patch1040:      0017-S390-Optimize-strncat-wcsncat.patch
Patch1041:      0018-S390-Optimize-strcmp-and-wcscmp.patch
Patch1042:      0019-S390-Optimize-strncmp-and-wcsncmp.patch
Patch1043:      0020-S390-Optimize-strchr-and-wcschr.patch
Patch1044:      0021-S390-Optimize-strchrnul-and-wcschrnul.patch
Patch1045:      0022-S390-Optimize-strrchr-and-wcsrchr.patch
Patch1046:      0023-S390-Optimize-strspn-and-wcsspn.patch
Patch1047:      0024-S390-Optimize-strpbrk-and-wcspbrk.patch
Patch1048:      0025-S390-Optimize-strcspn-and-wcscspn.patch
Patch1049:      0026-S390-Optimize-memchr-rawmemchr-and-wmemchr.patch
Patch1050:      0027-S390-Optimize-memccpy.patch
Patch1051:      0028-S390-Optimize-wmemset.patch
Patch1052:      0029-S390-Optimize-wmemcmp.patch
Patch1053:      0030-S390-Optimize-memrchr.patch
# PATCH-FIX-UPSTREAM AVX-512 optimized memcpy for KNL
Patch1054:      avx512-knl-memcpy.patch
# PATCH-FIX-UPSTREAM Stack overflow in _nss_dns_getnetbyname_r (CVE-2016-3075, BZ #19879)
Patch1055:      nss-dns-getnetbyname.patch
# PATCH-FIX-UPSTREAM S390: Save and restore fprs/vrs while resolving symbols (BZ #19916)
Patch1056:      s390-runtime-resolve.patch
# PATCH-FIX-UPSTREAM glob: Do not copy d_name field of struct dirent (CVE-2016-1234, BZ #19779)
Patch1057:      glob-altdirfunc.patch
# PATCH-FIX-UPSTREAM Fixes for malloc performance regression from SLE 11
Patch1058:      malloc-Consistently-apply-trim_threshold-to-all-heap.patch
Patch1059:      malloc-Prevent-arena-free_list-from-turning-cyclic-B.patch
Patch1060:      malloc-Fix-attached-thread-reference-count-handling-.patch
Patch1061:      malloc-Fix-list_lock-arena-lock-deadlock-BZ-19182.patch
# PATCH-FIX-UPSTREAM getaddrinfo: stack overflow in hostent conversion (CVE-2016-3706, BZ #20010)
Patch1062:      getaddrinfo-hostent-conv-stack-overflow.patch
# PATCH-FIX-UPSTREAM sunrpc: Do not use alloca in clntudp_call (CVE-2016-4429, BZ #20112)
Patch1063:      clntudp-call-alloca.patch
# PATCH-FIX-UPSTREAM Utilize x86_64 vector math functions w/o -fopenmp
Patch1064:      vector-math-gcc-6.patch
# PATCH-FIX-UPSTREAM Fix nscd assertion failure in gc (BZ #19755)
Patch1065:      nscd-gc-crash.patch
# PATCH-FIX-UPSTREAM resolv: Always set *resplen2 out parameter in send_dg (BZ #19791)
Patch1066:      resolv-assertion-failure.patch
# PATCH-FIX-UPSTREAM fork in libpthread cannot use IFUNC resolver (BZ #19861)
Patch1067:      pt-fork.patch
# PATCH-FIX-UPSTREAM Power9 support
Patch1068:      power9-support.patch
# PATCH-FIX-UPSTREAM Power9 optimized strcmp
Patch1069:      power9-strcmp.patch
# PATCH-FIX-UPSTREAM Power9 optimized strncmp
Patch1070:      power9-strncmp.patch
# PATCH-FIX-UPSTREAM Remove improper assert in dlclose (BZ #11941)
Patch1071:      dlclose-assert-init-called.patch

### 
# Patches awaiting upstream approval
###
# PATCH-FIX-UPSTREAM Always to locking when accessing streams (BZ #15142)
Patch2000:      fix-locking-in-_IO_cleanup.patch
# PATCH-FIX-UPSTREAM Never try to execute the file in ldd (BZ #16750)
Patch2001:      ldd-system-interp.patch
# PATCH-FIX-UPSTREAM Don't close or flush stdio streams on abort (BZ #15436)
Patch2002:      abort-no-flush.patch
# PATCH-FIX-UPSTREAM Speedup memset on x86-64 for large block sizes (BZ #16830)
Patch2003:      glibc-memset-nontemporal.diff
# PATCH-FIX-UPSTREAM Static dlopen default library search path fix (BZ #17250)
Patch2004:      static-dlopen.patch
# PATCH-FIX-UPSTREAM Fix fnmatch handling of collating elements (BZ #17396, BZ #16976)
Patch2005:      fnmatch-collating-elements.patch
# PATCH-FIX-UPSTREAM Properly reread entry after failure in nss_files getent function (BZ #18991)
Patch2006:      nss-files-long-lines-2.patch
# PATCH-FIX-UPSTREAM Fix iconv buffer handling with IGNORE error handler (BZ #18830)
Patch2007:      iconv-reset-input-buffer.patch
# PATCH-FIX-UPSTREAM Reinitialize dl_load_write_lock on fork (BZ #19282)
Patch2008:      reinitialize-dl_load_write_lock.patch
# PATCH-FIX-UPSTREAM Return proper status from _nss_nis_initgroups_dyn (BZ #20262)
Patch2009:      nis-initgroups-status.patch
# PATCH-FIX-UPSTREAM Fix generic __lll_robust_timedlock_wait to check for timeout (BZ #20263)
Patch2010:      robust-mutex-deadlock.patch

# Non-glibc patches
# PATCH-FIX-OPENSUSE Remove debianisms from manpages
Patch3000:      manpages.patch

%description
The glibc-utils package contains mtrace, a memory leak tracer and
xtrace, a function call tracer which can be helpful during program
debugging.

If you are unsure if you need this, don't install this package.

%package info
Summary:        Info Files for the GNU C Library
License:        GFDL-1.1
Group:          Documentation/Other
Requires(post): %{install_info_prereq}
Requires(postun): %{install_info_prereq}
BuildArch:      noarch

%description info
This package contains the documentation for the GNU C library stored as
info files. Due to a lack of resources, this documentation is not
complete and is partially out of date.

%package html
Summary:        HTML Documentation for the GNU C Library
License:        GFDL-1.1
Group:          Documentation/HTML
BuildArch:      noarch

%description html
This package contains the HTML documentation for the GNU C library. Due
to a lack of resources, this documentation is not complete and is
partially out of date.

%package i18ndata
Summary:        Database Sources for 'locale'
License:        GPL-2.0+ and MIT
Group:          System/Libraries
BuildArch:      noarch

%description i18ndata
This package contains the data needed to build the locale data files to
use the internationalization features of the GNU libc. It is normally
not necessary to install this packages, the data files are already
created.

%package locale
Summary:        Locale Data for Localized Programs
License:        GPL-2.0+ and MIT and LGPL-2.1+
Group:          System/Libraries
Requires(post): /bin/cat
Requires:       glibc = %{version}
# bug437293
%ifarch ppc64
Obsoletes:      glibc-locale-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-locale-32bit
%endif

%description locale
Locale data for the internationalisation features of the GNU C library.

%package -n nscd
Summary:        Name Service Caching Daemon
License:        GPL-2.0+
Group:          System/Daemons
Provides:       glibc:/usr/sbin/nscd
Requires:       glibc = %{version}
Obsoletes:      unscd <= 0.48
Requires(pre):  pwdutils
%{?systemd_requires}

%description -n nscd
Nscd caches name service lookups and can dramatically improve
performance with NIS, NIS+, and LDAP.

%package profile
Summary:        Libc Profiling and Debugging Versions
License:        LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Requires:       glibc = %{version}
# bug437293
%ifarch ppc64
Obsoletes:      glibc-profile-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-profile-32bit
%endif

%description profile
This package contains special versions of the GNU C library which are
necessary for profiling and debugging.

%package devel
Summary:        Include Files and Libraries Mandatory for Development
License:        BSD-3-Clause and LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Obsoletes:      epoll = 1.0
Provides:       epoll < 1.0
# bug437293
%ifarch ppc64
Obsoletes:      glibc-devel-64bit
%endif
%ifarch ppc
Obsoletes:      glibc-devel-32bit
%endif
Requires:       glibc = %{version}
Requires:       linux-kernel-headers

%description devel
These libraries are needed to develop programs which use the standard C
library.

%package devel-static
Summary:        C library static libraries for -static linking
License:        BSD-3-Clause and LGPL-2.1+ and SUSE-LGPL-2.1+-with-GCC-exception and GPL-2.0+
Group:          Development/Libraries/C and C++
Requires:       %{name}-devel = %{version}
# Provide Fedora name for package to make packaging easier
Provides:       %{name}-static = %version

%description devel-static
The glibc-devel-static package contains the C library static libraries
for -static linking.  You don't need these, unless you link statically,
which is highly discouraged.

# makedb requires libselinux. We add this program in a separate
# package so that glibc does not require libselinux.
%package extra
Summary:        Extra binaries from GNU C Library
License:        LGPL-2.1+
Group:          Development/Languages/C and C++
Requires:       glibc = %{version}

%description extra
The glibc-extra package contains some extra binaries for glibc that
are not essential but recommend to use.

makedb: A program to create a database for nss

%package obsolete
Summary:        Obsolete Shared Libraries from the GNU C Library
License:        LGPL-2.0+
Group:          System/Libraries
Requires:       glibc = %{version}

%description obsolete
This package provides some old libraries from the GNU C Library which
are no longer supported. Additional it provides a compatibility library
for old binaries linked against glibc 2.0.

Install this package if you need one of this libraries to get old
binaries working, but since this libraries are not supported and there
is no gurantee that they work for you, you should try to get newer
versions of your software.

%prep
%setup -n glibc-%{version} -q -a 3 -a 4
# Owl crypt_blowfish
tar -xzf %SOURCE50
pushd crypt_blowfish-%{crypt_bf_version}
%patch2 -p1
%patch3 -p1
%patch4 -p1
%patch5
popd
mv crypt/{crypt.h,gnu-crypt.h}
mv crypt_blowfish-%crypt_bf_version/*.[chS] crypt/
#
%patch1 -p1
%patch6 -p1
%patch7 -p1
%patch8 -p1
# avoid changing nscd_stat.c mtime to avoid code generation
# differences on each rebuild
touch -r nscd/nscd_stat.c nscd/s-stamp
%patch9 -p1
touch -r nscd/s-stamp nscd/nscd_stat.c
rm nscd/s-stamp
%patch10 -p1
%patch11 -p1
%patch12 -p1
%patch13 -p1
%patch14 -p1
%patch15 -p1
%patch18 -p1
%patch19 -p1
%patch20 -p1
%patch21 -p1

%patch100 -p1
%patch102 -p1
%patch103 -p1
%patch104 -p1
%patch105 -p1

%patch300 -p1
%patch301 -p1
%patch304 -p1
%patch306 -p1

%patch1000 -p1
%patch1001 -p1
%patch1002 -p1
%patch1003 -p1
%patch1004 -p1
%patch1005 -p1
%patch1006 -p1
%patch1007 -p1
%patch1008 -p1
%patch1009 -p1
%patch1010 -p1
%patch1011 -p1
%patch1012 -p1
%patch1013 -p1
%patch1014 -p1
%patch1015 -p1
%patch1016 -p1
%patch1017 -p1
%patch1018 -p1
%patch1019 -p1
%patch1020 -p1
%patch1021 -p1
%patch1022 -p1
%patch1023 -p1
%patch1024 -p1
%patch1025 -p1
%patch1026 -p1
%patch1027 -p1
%patch1028 -p1
%patch1029 -p1
%patch1030 -p1
%patch1031 -p1
%patch1032 -p1
%patch1033 -p1
%patch1034 -p1
%patch1035 -p1
%patch1036 -p1
%patch1037 -p1
%patch1038 -p1
%patch1039 -p1
%patch1040 -p1
%patch1041 -p1
%patch1042 -p1
%patch1043 -p1
%patch1044 -p1
%patch1045 -p1
%patch1046 -p1
%patch1047 -p1
%patch1048 -p1
%patch1049 -p1
%patch1050 -p1
%patch1051 -p1
%patch1052 -p1
%patch1053 -p1
%patch1054 -p1
%patch1055 -p1
%patch1056 -p1
%patch1057 -p1
%patch1058 -p1
%patch1059 -p1
%patch1060 -p1
%patch1061 -p1
%patch1062 -p1
%patch1063 -p1
%patch1064 -p1
%patch1065 -p1
%patch1066 -p1
%patch1067 -p1
%patch1068 -p1
%patch1069 -p1
%patch1070 -p1
%patch1071 -p1

%patch2000 -p1
%patch2001 -p1
%patch2002 -p1
%patch2003 -p1
%patch2004 -p1
%patch2005 -p1
%patch2006 -p1
%patch2007 -p1
%patch2008 -p1
%patch2009 -p1
%patch2010 -p1

%patch3000

#
# Inconsistency detected by ld.so: dl-close.c: 719: _dl_close: Assertion `map->l_init_called' failed!
#
# Glibc 2.8 introduced the HP_TIMING element to the rtld_global_ro struct # definition.
# If the base is built without power4 the loader won't have this element in
# the struct whereas the power4/5/6/... libc will, so there will be a disconnect
# between the size of the rtld_global_ro struct between the two and dl_close
# ends up getting called incorrectly when it's actually attempting to call a
# resolver function.  This is because the GLRO() macro simply attempts to
# compute an offset and gets the wrong one.
# Building the base glibc with --with-cpu=power4 solves this problem.
# But: ppc32 can not default to -mcpu=power4 because it would emit instructions
# which are not available on G3, G4 etc.
#
# We simply remove the power4 files, and build the base glibc for a generic powerpc cpu
# Additional cputuned libs can now be used on powerpc32
#
rm -fv sysdeps/powerpc/powerpc32/power4/hp-timing.c sysdeps/powerpc/powerpc32/power4/hp-timing.h
find . -name configure | xargs touch

#######################################################################
###
### BUILD
###
#######################################################################

%build
if [ -x /bin/uname.bin ]; then
	/bin/uname.bin -a
else
	uname -a
fi
uptime || :
ulimit -a
nice
# We do not want configure to figure out the system its building one
# to support a common ground and thus set build and host to the
# target_cpu.
%ifarch %arm
%define target %{_target_cpu}-suse-linux-gnueabi
%else
%define target %{_target_cpu}-suse-linux
%endif
# Don't use as-needed, it breaks glibc assumptions
# Before enabling it, run the testsuite and verify that it
# passes completely
export SUSE_ASNEEDED=0
# Adjust glibc version.h
echo "#define CONFHOST \"%{target}\"" >> version.h
echo "#define GITID \"%{git_id}\"" >> version.h
#
# Default CFLAGS and Compiler
#
BuildFlags="%{optflags} -U_FORTIFY_SOURCE"
BuildFlags=$(echo $BuildFlags | sed -e 's#-fstack-protector[^ ]*##' -e 's#-ffortify=[0-9]*##')
BuildCC="%__cc"
BuildCCplus="%__cxx"
add_ons=libidn
#
#now overwrite for some architectures
#
%ifarch sparc64
	BuildFlags="-O2 -mcpu=ultrasparc -mvis -fcall-used-g6"
	BuildCC="gcc -m64"
	BuildCCplus="$BuildCCplus -m64"
%endif
%ifarch sparc
	BuildFlags="$BuildFlags -fcall-used-g6"
	BuildCC="gcc -m32"
	BuildCCplus="$BuildCCplus -m32"
%endif
%ifarch sparcv9
	BuildFlags="$BuildFlags -mcpu=ultrasparc -fcall-used-g6"
	BuildCC="gcc -m32"
	BuildCCplus="$BuildCCplus -m32"
%endif
%ifarch alphaev6
	BuildFlags="-mcpu=ev6"
%endif
%ifarch ppc ppc64
	BuildFlags="$(echo $BuildFlags | sed 's#-mminimal-toc##')"
%endif
%ifarch ppc64
	BuildCC="$BuildCC -m64"
	BuildCCplus="$BuildCCplus -m64"
%endif
%ifarch hppa
	BuildFlags="$BuildFlags -mpa-risc-1-1 -fstrict-aliasing"
%endif
# Add flags for all plattforms except AXP
%ifnarch alpha
	BuildFlags="$BuildFlags -g"
%endif
%if %{disable_assert}
	BuildFlags="$BuildFlags -DNDEBUG=1"
%endif
%ifarch %ix86
	add_ons=$add_ons,noversion
%endif
%ifarch mipsel
	# fails to build otherwise - need to recheck and fix
	%define enable_stackguard_randomization 0
%endif

configure_and_build_glibc() {
	local dirname="$1"; shift
	local cflags="$1"; shift
	mkdir "cc-$dirname"
	cd "cc-$dirname"
%ifarch %arm aarch64
	# remove asynchronous-unwind-tables during configure as it causes
	# some checks to fail spuriously on arm
	conf_cflags="${cflags/-fasynchronous-unwind-tables/}"
	conf_cflags="${conf_cflags/-funwind-tables/}"
%else
	conf_cflags="$cflags"
%endif

profile="--disable-profile"
%if %{build_profile}
        if [ "$dirname" = "base" ] ; then
	    profile="--enable-profile"
	fi
%endif
	elision=--enable-lock-elision
	if [ "$dirname" = "noelision" ]; then
	    elision=--disable-lock-elision
	fi
	../configure \
		CFLAGS="$conf_cflags" BUILD_CFLAGS="$conf_cflags" \
		CC="$BuildCC" CXX="$BuildCCplus" \
		--prefix=%{_prefix} \
		--libexecdir=%{_libexecdir} --infodir=%{_infodir} \
		--enable-add-ons=$add_ons \
	        $profile $elision \
		"$@" \
%if %{enable_stackguard_randomization}
		--enable-stackguard-randomization \
%endif
		--build=%{target} --host=%{target} \
%ifarch armv7hl ppc ppc64 ppc64le %{ix86} x86_64 sparc sparc64 s390 s390x
		--enable-multi-arch \
%endif
%ifarch mipsel
		--without-fp \
%endif
%ifarch ppc64p7
		--with-cpu=power7 \
%endif
		--enable-kernel=%{enablekernel} \
		--with-bugurl=http://bugs.opensuse.org \
		--enable-bind-now --enable-obsolete-rpc
# Should we enable --enable-systemtap?
# Should we enable --enable-nss-crypt to build use freebl3 hash functions?
	# explicitly set CFLAGS to use the full CFLAGS (not the reduced one for configure)
	make %{?_smp_mflags} CFLAGS="$cflags" BUILD_CFLAGS="$cflags"
	cd ..
}

%if !%{optimize_power}
	#
	# Build base glibc
	#
	configure_and_build_glibc base "$BuildFlags"
%else
	#
	# Build POWER-optimized glibc
	#
	# First, base build:
	pBuildFlags="$BuildFlags -mtune=%{powerpc_optimize_tune}"
	%if "%{powerpc_optimize_base}" != ""
	pBuildFlags+=" -mcpu=%{powerpc_optimize_base}"
	%endif
	%if "%{powerpc_optimize_base}" != ""
	configure_and_build_glibc base "$pBuildFlags" --with-cpu=%{powerpc_optimize_base}
	%else
	# Use no default CPU
	configure_and_build_glibc base "$pBuildFlags"
	%endif
	%if %{build_variants}
	# Then other power variants:
	for pcpu in \
	%if %{powerpc_optimize_cpu_power4}
		power4 \
	%endif
	%if %{powerpc_optimize_cpu_power6}
		power6 \
	%endif
	%if %{powerpc_optimize_cpu_power7}
		power7 \
	%endif
	; do
		configure_and_build_glibc $pcpu "$BuildFlags -mcpu=$pcpu" \
			--with-cpu=$pcpu
	done
	# Eventually, special Cell variant:
	%if %{powerpc_optimize_cpu_cell}
		configure_and_build_glibc ppc-cell-be "$BuildFlags -mcpu=cell"
	%endif
	%endif # %{build_variants}
%endif # optimize_power

%if %{build_variants}
%ifarch i686 x86_64
configure_and_build_glibc noelision "$BuildFlags"
%endif
%endif

#
# Build html documentation
#
%if %{build_html}
make -C cc-base html
%endif

#
# Build glibc_post_upgrade binary
#
$BuildCC -static %{optflags} -Os $RPM_SOURCE_DIR/glibc_post_upgrade.c -o glibc_post_upgrade \
     -Lcc-base -Bcc-base/csu \
    '-DREMOVE_TLS_DIRS' '-DREMOVE_PPC_OPTIMIZE_POWER5' \
%ifarch ppc ppc64
 %if !%{powerpc_optimize_cpu_power4}
    '-DREMOVE_PPC_OPTIMIZE_POWER4' \
 %endif
 %if !%{powerpc_optimize_cpu_power6}
    '-DREMOVE_PPC_OPTIMIZE_POWER6' \
 %endif
 %if !%{powerpc_optimize_cpu_power7}
    '-DREMOVE_PPC_OPTIMIZE_POWER7' \
 %endif
 %if !%{powerpc_optimize_cpu_cell}
    '-DREMOVE_PPC_OPTIMIZE_CELL' \
 %endif
%endif
    '-DLIBDIR="/%{_lib}"' '-DGCONV_MODULES_DIR="%{_libdir}/gconv"'

# crypt_blowfish man pages
pushd crypt_blowfish-%{crypt_bf_version}
make man
popd

#######################################################################
###
### CHECK
###
#######################################################################

%check
%if %{testsuite_build}
# The testsuite will fail if asneeded is used
export SUSE_ASNEEDED=0
# Increase timeout
export TIMEOUTFACTOR=16
make -C cc-base -k check || {
  cd cc-base
  o=$-
  set +x
  for sum in */*.sum; do
    while read s t; do
      case $s in
	XPASS:|PASS:)
	  echo ++++++ $s $t ++++++
	  ;;
	*) # X?FAIL:
	  echo ------ $s $t ------
	  test ! -f $t.out || cat $t.out
	  ;;
	esac
    done < $sum
  done
  set -$o
}
%else
# This has to pass on all platforms!
# Exceptions:
# None!
make %{?_smp_mflags} -C cc-base check-abi
%endif

#######################################################################
###
### INSTALL
###
#######################################################################

%install
%if %{normal_build}
# We don't want to strip the .symtab from our libraries in find-debuginfo.sh,
# certainly not from libpthread.so.* because it is used by libthread_db to find
# some non-exported symbols in order to detect if threading support
# should be enabled.  These symbols are _not_ exported, and we can't easily
# export them retroactively without changing the ABI.  So we have to
# continue to "export" them via .symtab, instead of .dynsym :-(
# But we also want to keep .symtab and .strtab of other libraries since some
# debugging tools currently require these sections directly inside the main
# files - specifically valgrind and PurifyPlus.
export STRIP_KEEP_SYMTAB=*.so*

# Make sure we will create the gconv-modules.cache
mkdir -p %{buildroot}%{_libdir}/gconv
touch %{buildroot}%{_libdir}/gconv/gconv-modules.cache

# Install base glibc
make %{?_smp_mflags} install_root=%{buildroot} install -C cc-base

install_optimized_variant() {
	local dirname="$1"; shift
	local subdir="$1"; shift
	local subdir_up="$1"; shift

cd "cc-$dirname"
destdir=$RPM_BUILD_ROOT/%{_lib}/$subdir
mkdir -p $destdir
# Don't run a complete make install, we know which libraries
# we want
for lib in libc math/libm nptl/libpthread rt/librt nptl_db/libthread_db
do
  libbase=${lib#*/}
  libbaseso=$(basename $RPM_BUILD_ROOT/%{_lib}/${libbase}-*.so)
  # Only install if different from base lib
  if cmp -s ${lib}.so ../cc-base/${lib}.so; then
    ln -sf $subdir_up/$libbaseso $destdir/$libbaseso
  else
    cp -a ${lib}.so $destdir/$libbaseso
  fi
done
cd ..
cc-base/elf/ldconfig -vn $destdir
}

# Install power-optimized glibc
%if %{optimize_power}
	%if %{powerpc_optimize_cpu_power4}
	install_optimized_variant power4 power4 ".."
	%endif
	%if %{powerpc_optimize_cpu_power6}
	install_optimized_variant power6 power6 ".."
	%endif
	%if %{powerpc_optimize_cpu_power7}
	install_optimized_variant power7 power7 ".."
	%endif
	%if %{powerpc_optimize_cpu_cell}
	install_optimized_variant ppc-cell-be ppc-cell-be ".."
	%endif
	%if %{powerpc_optimize_cpu_power6}
	# power6 is compatible with power6x
	# doing a directory symlink doesnt work, ldconfig follows them and accepts only the first real dir
	if test -d %{buildroot}/%{_lib}/power6; then
	    mkdir -p %{buildroot}/%{_lib}/power6x
	    for i in %{buildroot}/%{_lib}/power6/*.so; do
		b=$(basename $i)
		ln -vs ../power6/$b %{buildroot}/%{_lib}/power6x/$b
	    done
	    cc-base/elf/ldconfig -vn %{buildroot}/%{_lib}/power6x
	fi
	%endif
%endif # optimize_power

%ifarch i686 x86_64
cd cc-noelision
destdir=$RPM_BUILD_ROOT/%{_lib}/noelision
mkdir -p $destdir
install -m 755 nptl/libpthread.so $destdir/libpthread-%{version}.so
cd ..
cc-base/elf/ldconfig -vn $destdir
%endif

# Install locales
%if %{build_locales}
	# XXX Do not install locales in parallel!
	cd cc-base
	# localedef creates hardlinks to other locales if possible
	# this will not work if we generate them in parallel.
	# thus we need to run fdupes on  /usr/lib/locale/
	# Still, on my system this is a speed advantage:
	# non-parallel build for install-locales: 9:34mins
	# parallel build with fdupes: 7:08mins
	make %{?_smp_mflags} install_root=%{buildroot} localedata/install-locales
	%fdupes %{buildroot}/usr/lib/locale
	cd ..
%endif
# Create file list for glibc-locale package
%{find_lang} libc

# Prepare obsolete/, used only on some architectures:
export RPM_BUILD_ROOT
%ifarch i586
mkdir -p %{buildroot}/%{_lib}/obsolete
%endif

# NPTL <bits/stdio-lock.h> is not usable outside of glibc, so include
# the generic one (RH#162634)
cp -av bits/stdio-lock.h %{buildroot}%{_includedir}/bits/stdio-lock.h

# Miscelanna:

install -m 0700 glibc_post_upgrade %{buildroot}%{_sbindir}

install -m 644 %{SOURCE7} %{buildroot}/etc
install -m 644 %{SOURCE5} %{buildroot}/etc
install -m 644 posix/gai.conf %{buildroot}/etc

mkdir -p %{buildroot}/etc/default
install -m 644 nis/nss %{buildroot}/etc/default/

mkdir -p %{buildroot}%{_includedir}/resolv
install -m 0644 resolv/mapv4v6addr.h %{buildroot}%{_includedir}/resolv/
install -m 0644 resolv/mapv4v6hostent.h %{buildroot}%{_includedir}/resolv/

%if %{build_html}
mkdir -p %{buildroot}%{_datadir}/doc/glibc
cp -p cc-base/manual/libc/*.html %{buildroot}%{_datadir}/doc/glibc
%endif

cd manpages; make install_root=%{buildroot} install; cd ..

# crypt_blowfish man pages
pushd crypt_blowfish-%{crypt_bf_version}
install -m755 -d %{buildroot}%{_mandir}/man3
install -m644 *.3 %{buildroot}%{_mandir}/man3
popd

# nscd tools:

cp nscd/nscd.conf %{buildroot}/etc
mkdir -p %{buildroot}/etc/init.d
ln -sf /sbin/service %{buildroot}/usr/sbin/rcnscd
mkdir -p %{buildroot}/run/nscd
touch %{buildroot}/run/nscd/{passwd,group,hosts,services,netgroup}
touch %{buildroot}/run/nscd/{socket,nscd.pid}

#
# Create ld.so.conf
#
cat > %{buildroot}/etc/ld.so.conf <<EOF
%if "%{_lib}" != "lib"
/usr/local/%{_lib}
%endif
%ifarch ppc
/usr/local/lib64
%endif
/usr/local/lib
include /etc/ld.so.conf.d/*.conf
# /lib64, /lib, /usr/lib64 and /usr/lib gets added
# automatically by ldconfig after parsing this file.
# So, they do not need to be listed.
EOF
# Add ldconfig cache directory for directory ownership
mkdir -p %{buildroot}/var/cache/ldconfig
# Empty the ld.so.cache:
rm -f %{buildroot}/etc/ld.so.cache
touch %{buildroot}/etc/ld.so.cache

# libNoVersion belongs only to glibc-obsolete:
%ifarch %ix86
rm -f %{buildroot}%{_libdir}/libNoVersion*
%ifarch i586
mkdir -p %{buildroot}/%{_lib}/obsolete/noversion
mv -v %{buildroot}/%{_lib}/libNoVersion* %{buildroot}/%{_lib}/obsolete/noversion/
%else
rm -f %{buildroot}/%{_lib}/libNoVersion*
%endif
%endif

# Don't look at ldd! We don't wish a /bin/sh requires
chmod 644 %{buildroot}%{_bindir}/ldd

# Remove timezone data, now coming in standalone package:
for i in sbin/sln usr/bin/tzselect usr/sbin/zic usr/sbin/zdump etc/localtime; do
	rm -f %{buildroot}/$i
done
rm -rf %{buildroot}%{_datadir}/zoneinfo

# Remove the buildflags tracking section and the build-id
for o in %{buildroot}/%{_libdir}/crt[1in].o %{buildroot}/%{_libdir}/lib*_nonshared.a; do
	objcopy -R ".comment.SUSE.OPTs" -R ".note.gnu.build-id" $o
done

mkdir -p %{buildroot}/usr/lib/tmpfiles.d/
install -m 644 %{SOURCE20} %{buildroot}/usr/lib/tmpfiles.d/
mkdir -p %{buildroot}/usr/lib/systemd/system
install -m 644 %{SOURCE21} %{buildroot}/usr/lib/systemd/system

%ifarch armv6hl armv7hl
# Provide compatibility link
ln -s ld-%{version}.so %{buildroot}/lib/ld-linux.so.3
%endif

# Move getconf to %{_libexecdir}/getconf/ to avoid cross device link
mv %{buildroot}%{_bindir}/getconf %{buildroot}%{_libexecdir}/getconf/getconf
ln -s %{_libexecdir}/getconf/getconf %{buildroot}%{_bindir}/getconf

# Remove unwanted files (packaged in glibc-utils)
rm -f %{buildroot}/%{_lib}/libmemusage*
rm -f %{buildroot}/%{_lib}/libpcprofile*
rm -f %{buildroot}%{_bindir}/memusage*
rm -f %{buildroot}%{_bindir}/mtrace
rm -f %{buildroot}%{_bindir}/pcprofiledump
rm -f %{buildroot}%{_bindir}/sotruss
rm -f %{buildroot}%{_bindir}/xtrace
rm -f %{buildroot}%{_bindir}/pldd
rm -rf %{buildroot}%{_libdir}/audit

%ifarch i686
# Remove files from glibc-{extra,info,i18ndata} and nscd
rm -rf %{buildroot}%{_infodir} %{buildroot}%{_prefix}/share/i18n
rm -f %{buildroot}%{_bindir}/makedb %{buildroot}/var/lib/misc/Makefile
rm -f %{buildroot}/etc/*nscd* %{buildroot}%{_sbindir}/*nscd*
rm -rf %{buildroot}/usr/lib/systemd
rm -rf %{buildroot}/usr/lib/tmpfiles.d
rm -rf %{buildroot}/run/nscd
%endif # i686

# LSB
%ifarch %ix86
ln -sf /%{_lib}/ld-linux.so.2 $RPM_BUILD_ROOT/%{_lib}/ld-lsb.so.3
%endif
%ifarch x86_64
ln -sf /%{_lib}/ld-linux-x86-64.so.2 $RPM_BUILD_ROOT/%{_lib}/ld-lsb-x86-64.so.3
%endif
%ifarch ppc
ln -sf /%{_lib}/ld.so.1 $RPM_BUILD_ROOT/%{_lib}/ld-lsb-ppc32.so.3
%endif
%ifarch ppc64
ln -sf /%{_lib}/ld64.so.1 $RPM_BUILD_ROOT/%{_lib}/ld-lsb-ppc64.so.3
%endif
%ifarch s390
ln -sf /%{_lib}/ld.so.1 $RPM_BUILD_ROOT/%{_lib}/ld-lsb-s390.so.3
%endif
%ifarch s390x
ln -sf /%{_lib}/ld64.so.1 $RPM_BUILD_ROOT/%{_lib}/ld-lsb-s390x.so.3
%endif

%endif # %{normal_build}

%if %{utils_build}

make %{?_smp_mflags} install_root=%{buildroot} install -C cc-base \
  subdirs='malloc debug elf'
cd manpages; make install_root=%{buildroot} install; cd ..
# Remove unwanted files
rm -f %{buildroot}/%{_lib}/ld*.so* %{buildroot}/%{_lib}/lib[!mp]*
rm -f %{buildroot}/lib/ld*.so*
rm -f %{buildroot}%{_libdir}/lib*
rm -f %{buildroot}%{_bindir}/{catchsegv,ldd*,sprof}
rm -rf %{buildroot}%{_mandir}/man*
rm -rf %{buildroot}/sbin %{buildroot}%{_includedir}

%endif # %{utils_build}

#######################################################################
###
### ...
###
#######################################################################

%if %{normal_build}
%post -p %{_sbindir}/glibc_post_upgrade

%postun -p /sbin/ldconfig

%endif # %{normal_build}

%post locale
for l in /usr/share/locale/locale.alias %{_libdir}/gconv/gconv-modules; do
	[ -d "$l.d" ] || continue
	echo "###X# The following is autogenerated from extra files in the .d directory:" >>"$l"
	cat "$l.d"/* >>"$l"
done
/usr/sbin/iconvconfig

%post info
%install_info --info-dir=%{_infodir} %{_infodir}/libc.info.gz

%postun info
%install_info_delete --info-dir=%{_infodir} %{_infodir}/libc.info.gz

%pre -n nscd
getent group nscd >/dev/null || %{_sbindir}/groupadd -r nscd
getent passwd nscd >/dev/null || %{_sbindir}/useradd -r -g nscd -c "User for nscd" -s /sbin/nologin -d /run/nscd nscd
%service_add_pre nscd.service

%preun -n nscd
%service_del_preun nscd.service

%post -n nscd
%service_add_post nscd.service
mkdir -p /run/nscd
# Previously we had nscd.socket, remove it
test -x /usr/bin/systemctl && /usr/bin/systemctl stop nscd.socket 2>/dev/null || :
test -x /usr/bin/systemctl && /usr/bin/systemctl disable nscd.socket 2>/dev/null  || :
# Hard removal in case the above did not work
rm -f /etc/systemd/system/sockets.target.wants/nscd.socket
exit 0

%postun -n nscd
%service_del_postun nscd.service
exit 0

%if %{normal_build}
%files
#######################################################################
###
### FILES
###
#######################################################################

# glibc
%defattr(-,root,root)
%doc LICENSES
%config(noreplace) /etc/bindresvport.blacklist
%config /etc/ld.so.conf
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /etc/ld.so.cache
%config(noreplace) /etc/rpc
%verify(not md5 size mtime) %config(noreplace) /etc/nsswitch.conf
%verify(not md5 size mtime) %config(noreplace) /etc/gai.conf
%config(noreplace) /etc/default/nss
%doc %{_mandir}/man1/gencat.1.gz
%doc %{_mandir}/man1/getconf.1.gz
%doc %{_mandir}/man5/*
/%{_lib}/ld-%{version}.so

# Each architecture has a different name for the dynamic linker:
%ifarch %arm
%ifarch armv6hl armv7hl
/%{_lib}/ld-linux-armhf.so.3
# Keep compatibility link
/%{_lib}/ld-linux.so.3
%else
/%{_lib}/ld-linux.so.3
%endif
%endif
%ifarch ia64
/%{_lib}/ld-linux-ia64.so.2
%endif
%ifarch ppc s390 mips hppa m68k
/%{_lib}/ld.so.1
%endif
%ifarch ppc64
/%{_lib}/ld64.so.1
%endif
%ifarch ppc64le
/%{_lib}/ld64.so.2
%endif
%ifarch s390x
/lib/ld64.so.1
/%{_lib}/ld64.so.1
%endif
%ifarch x86_64
/%{_lib}/ld-linux-x86-64.so.2
%endif
%ifarch %ix86 %sparc
/%{_lib}/ld-linux.so.2
%endif
%ifarch aarch64
/lib/ld-linux-aarch64.so.1
/%{_lib}/ld-linux-aarch64.so.1
%endif
%ifarch %ix86 x86_64 ppc ppc64 s390 s390x
# LSB
/%{_lib}/*-lsb*.so.3
%endif

/%{_lib}/libBrokenLocale-%{version}.so
/%{_lib}/libBrokenLocale.so.1
/%{_lib}/libSegFault.so
/%{_lib}/libanl-%{version}.so
/%{_lib}/libanl.so.1
/%{_lib}/libc-%{version}.so
/%{_lib}/libc.so.6*
/%{_lib}/libcidn-%{version}.so
/%{_lib}/libcidn.so.1
/%{_lib}/libcrypt-%{version}.so
/%{_lib}/libcrypt.so.1
/%{_lib}/libowcrypt-%{version}.so
/%{_lib}/libowcrypt.so.1
/%{_lib}/libdl-%{version}.so
/%{_lib}/libdl.so.2*
/%{_lib}/libm-%{version}.so
/%{_lib}/libm.so.6*
%ifarch x86_64
/%{_lib}/libmvec-%{version}.so
/%{_lib}/libmvec.so.1
%endif
/%{_lib}/libnsl-%{version}.so
/%{_lib}/libnsl.so.1
/%{_lib}/libnss_compat-%{version}.so
/%{_lib}/libnss_compat.so.2
/%{_lib}/libnss_db-%{version}.so
/%{_lib}/libnss_db.so.2
/%{_lib}/libnss_dns-%{version}.so
/%{_lib}/libnss_dns.so.2
/%{_lib}/libnss_files-%{version}.so
/%{_lib}/libnss_files.so.2
/%{_lib}/libnss_hesiod-%{version}.so
/%{_lib}/libnss_hesiod.so.2
/%{_lib}/libnss_nis-%{version}.so
/%{_lib}/libnss_nis.so.2
/%{_lib}/libnss_nisplus-%{version}.so
/%{_lib}/libnss_nisplus.so.2
/%{_lib}/libpthread-%{version}.so
/%{_lib}/libpthread.so.0
/%{_lib}/libresolv-%{version}.so
/%{_lib}/libresolv.so.2
/%{_lib}/librt-%{version}.so
/%{_lib}/librt.so.1
/%{_lib}/libthread_db-1.0.so
/%{_lib}/libthread_db.so.1
/%{_lib}/libutil-%{version}.so
/%{_lib}/libutil.so.1
%define optimized_libs() \
	%dir %attr(0755,root,root) /%{_lib}/%1\
	/%{_lib}/%1/libc-%{version}.so\
	/%{_lib}/%1/libc.so.6*\
	/%{_lib}/%1/libm-%{version}.so\
	/%{_lib}/%1/libm.so.6*\
	/%{_lib}/%1/libpthread-%{version}.so\
	/%{_lib}/%1/libpthread.so.0\
	/%{_lib}/%1/librt-%{version}.so\
	/%{_lib}/%1/librt.so.1\
	/%{_lib}/%1/libthread_db-1.0.so\
	/%{_lib}/%1/libthread_db.so.1

%if %{optimize_power}
	%if %{powerpc_optimize_cpu_power4}
		%{optimized_libs power4}
	%endif
	%if %{powerpc_optimize_cpu_power6}
		%{optimized_libs power6}
		%{optimized_libs power6x}
	%endif
	%if %{powerpc_optimize_cpu_power7}
		%{optimized_libs power7}
	%endif
	%if %{powerpc_optimize_cpu_cell}
		%{optimized_libs ppc-cell-be}
	%endif
%endif # optimize_power
%ifarch i686 x86_64
/%{_lib}/noelision
%endif
%dir %attr(0700,root,root) /var/cache/ldconfig
/sbin/ldconfig
%{_bindir}/gencat
%{_bindir}/getconf
%{_bindir}/getent
%{_bindir}/iconv
%attr(755,root,root) %{_bindir}/ldd
%ifarch %ix86 sparc sparcv9 m68k
	%{_bindir}/lddlibc4
%endif
%{_bindir}/locale
%{_bindir}/localedef
%dir %attr(0755,root,root) %{_libexecdir}/getconf
%{_libexecdir}/getconf/*
%{_sbindir}/glibc_post_upgrade
%{_sbindir}/iconvconfig

%ifarch i586
%files obsolete
%defattr (755,root,root,755)
/%{_lib}/obsolete
%endif

%files locale -f libc.lang
%defattr(-,root,root)
%{_datadir}/locale/locale.alias
%if %{build_locales}
	/usr/lib/locale
%endif
%{_libdir}/gconv

%files devel
%defattr(-,root,root)
%doc COPYING COPYING.LIB NEWS README BUGS CONFORMANCE
%doc %{_mandir}/man1/catchsegv.1.gz
%doc %{_mandir}/man1/rpcgen.1.gz
%doc %{_mandir}/man3/*
%{_bindir}/catchsegv
%{_bindir}/rpcgen
%{_bindir}/sprof
%{_includedir}/*
%{_libdir}/*.o
%{_libdir}/*.so
# These static libraries are needed even for shared builds
%{_libdir}/libc_nonshared.a
%{_libdir}/libg.a
%{_libdir}/libieee.a
%ifarch ppc ppc64 ppc64le s390 s390x sparc sparcv8 sparcv9 sparcv9v
# This is not built on sparc64.
	%{_libdir}/libnldbl_nonshared.a
%endif
%{_libdir}/libmcheck.a
%ifarch x86_64
%{_libdir}/libmvec_nonshared.a
%endif
%{_libdir}/libpthread_nonshared.a
%{_libdir}/librpcsvc.a

%files devel-static
%defattr(-,root,root)
%{_libdir}/libBrokenLocale.a
%{_libdir}/libanl.a
%{_libdir}/libc.a
%{_libdir}/libcrypt.a
%{_libdir}/libowcrypt.a
%{_libdir}/libdl.a
%{_libdir}/libm.a
%ifarch x86_64
%{_libdir}/libmvec.a
%endif
%{_libdir}/libnsl.a
%{_libdir}/libpthread.a
%{_libdir}/libresolv.a
%{_libdir}/librt.a
%{_libdir}/libutil.a

%ifnarch i686
%files info
%defattr(-,root,root)
%doc %{_infodir}/libc.info.gz
%doc %{_infodir}/libc.info-?.gz
%doc %{_infodir}/libc.info-??.gz

%if %{build_html}
%files html
%defattr(-,root,root)
%doc %{_prefix}/share/doc/glibc
%endif

%files i18ndata
%defattr(-,root,root)
%{_prefix}/share/i18n

%files -n nscd
%defattr(-,root,root)
%config(noreplace) /etc/nscd.conf
%{_sbindir}/nscd
%{_sbindir}/rcnscd
/usr/lib/systemd/system/nscd.service
%dir /usr/lib/tmpfiles.d
/usr/lib/tmpfiles.d/nscd.conf
%dir %attr(0755,root,root) %ghost /run/nscd
%attr(0644,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/nscd.pid
%attr(0666,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/socket
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/passwd
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/group
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/hosts
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/services
%attr(0600,root,root) %verify(not md5 size mtime) %ghost %config(missingok,noreplace) /run/nscd/netgroup
%endif # !i686

%if %{build_profile}
%files profile
%defattr(-,root,root)
%{_libdir}/libc_p.a
%{_libdir}/libBrokenLocale_p.a
%{_libdir}/libanl_p.a
%{_libdir}/libm_p.a
%ifarch x86_64
%{_libdir}/libmvec_p.a
%endif
%{_libdir}/libcrypt_p.a
%{_libdir}/libowcrypt_p.a
%{_libdir}/libpthread_p.a
%{_libdir}/libresolv_p.a
%{_libdir}/libnsl_p.a
%{_libdir}/librt_p.a
%{_libdir}/librpcsvc_p.a
%{_libdir}/libutil_p.a
%{_libdir}/libdl_p.a
%endif

%ifnarch i686
%files extra
%defattr(-,root,root)
%{_bindir}/makedb
/var/lib/misc/Makefile
%endif # !i686

%endif # %{normal_build}

%if %{utils_build}
%files
%defattr(-,root,root)
/%{_lib}/libmemusage.so
/%{_lib}/libpcprofile.so
%dir %{_libdir}/audit
%{_libdir}/audit/sotruss-lib.so
%{_bindir}/memusage
%{_bindir}/memusagestat
%{_bindir}/mtrace
%{_bindir}/pcprofiledump
%{_bindir}/sotruss
%{_bindir}/xtrace
%{_bindir}/pldd
%endif # %{utils_build}

%changelog

Places

File glibc-utils.spec of Package glibc-testsuite.4524

Places