File _patchinfo of Package patchinfo.423

<patchinfo incident="423">
  <issue id="904323" tracker="bnc">wicked sets MTU from dhcp, not from config file (this is different from prior openSUSE releases)</issue>
  <issue id="905421" tracker="bnc">netlink buffer on wicked still too small</issue>
  <issue id="907215" tracker="bnc">after 13.1 -> 13.2 upgrade, wickedd fails to exec existing if-{up,down}.d/* scripts</issue>
  <issue id="907694" tracker="bnc">wickedd boot error "netlink reports error -17" on 'lo' interface IPv6 setup</issue>
  <issue id="909307" tracker="bnc">wicked.service can't configure user-class id</issue>
  <issue id="911299" tracker="bnc">yast2 lan may not support WPA(1)</issue>
  <issue id="911562" tracker="bnc">wicked does not set up IP on interfaces without carrier</issue>
  <issue id="914792" tracker="bnc">L3:wicked does not set up IPs on interfaces without ready link</issue>
  <issue id="918662" tracker="bnc">wicked assigns wrong names to interfaces and/or brings up multiple interfaces with the same IP</issue>
  <issue id="920070" tracker="bnc">Partner-L3: POST_UP_SCRIPT configuration option not working with wicked</issue>
  <issue id="920889" tracker="bnc">wicked removes DHCPv6 address from interface</issue>
  <issue id="921218" tracker="bnc">Wireless with wicked does not get an address at boot time</issue>
  <issue id="927065" tracker="bnc">Wicked fails to start VLAN on top of macvlan on top of bond</issue>
  <issue id="927616" tracker="bnc">ad-hoc mode not working</issue>
  <category>recommended</category>
  <rating>moderate</rating>
  <packager>pwieczorkiewicz</packager>
  <description>This update for Wicked provides the following fixes:

- Initial pre/post-up/down script and systemd service start support.
  (bsc#920070, bsc#907215)
- Fixed lease address owner and lifetime tracking to update address
  lifetimes on dhcp6 renewal, correctly drop (requesting/deferred)
  leases in wickedd not (yet) existing as lease in dhcp supplicants
  and avoid address exists error messages. (bsc#920889, bsc#907694)
- Add missed wpa_supplicant's wireless mode names. (bsc#927616)
- schema: Require macvlan lower device same as vlan. (bsc#927065)
- Fixes to use only ready devices by name to avoid dependency
  confusion mapping config to wrong device, event races and wrong
  use of the link-up instead of the wireless link-associated event.
  (bsc#918662, bsc#921218)
- nanny: Fix a memory-leak on policy load failure.
- ifreload: Fix segmentation fault handling argument for --timeout option.
- client/nanny: Initial handing of link-detection/require-link and
  timeout control flags (LINK_REQUIRED, LINK_READY_WAIT variables in
  suse ifcfg) to continue setup without ready link when requested in
  the config or based on device requirements (bsc#911562,bsc#914792).
- client/nanny: Wait for event ACKs from wickedd instead to continue
  on successful request results where possible, to minimize the risk
  of an event backlog (bsc#905421).
- client/nanny: fsm timer and cleanup related fixes and improvements,
  fix to use "device-setup" (MAC, bond/bridge options, ...) as state
  name instead of "device-up" and use "device-up" as state when the
  device/link is administratively set UP. Separated waitLinkUp method
  to wait for link/carrier from linkUp setting it administratively UP.
- wireless: Consider auth-proto parameter (wpa1|wpa2) (bsc#911299).
- dhcp4: Do not set/query mtu if set in the config (bsc#904323).
- dhcp4: Limit MTU to be lower-equal 576 as before.
- dhcp4: Completed user-class option support permitting an rfc3004
  formatted option or as non-rfc, but widely used string (bsc#909307).
</description>
  <summary>Recommended update for wicked</summary>
</patchinfo>