File kiwi-templates-SLES12-RPi.changes of Package kiwi-templates-SLES12-RPi
-------------------------------------------------------------------
Tue Oct 4 09:50:51 UTC 2016 - fvogt@suse.com
- Use gcc6 (bsc#1000033)
-------------------------------------------------------------------
Wed Sep 21 10:17:53 UTC 2016 - fvogt@suse.com
- Add all available patterns (except fips, ofed and gnome-basic) (bsc#1000033)
- Add support for KVM
- Disable apparmor, add cpupower
- Use SLES_RPI-release(-MINI) (bsc#1000624)
-------------------------------------------------------------------
Tue Sep 13 07:20:21 UTC 2016 - fvogt@suse.com
- Fix build
- Add Obs-ExclusiveArch: aarch64 comment
- Remove rpi3-dtb.tar.gz as now part of u-boot.bin (bsc#989513)
-------------------------------------------------------------------
Tue Sep 6 13:34:26 UTC 2016 - fvogt@suse.com
- Add btrfs subvolumes and disable COW on some
- Use bcm43xx-firmware + symlink instead of brcm43430-firmware
- Update rpi3-dtb.tar.gz to include cpufreq and thermal nodes (bsc#989511)
-------------------------------------------------------------------
Mon Sep 5 07:32:08 UTC 2016 - fvogt@suse.com
- Rename to kiwi-templates-SLES12-RPi
- Disable other images in pre_checkin.sh
- Disable HDMI hotplug for RPi3
-------------------------------------------------------------------
Tue Aug 30 13:34:25 UTC 2016 - fvogt@suse.com
- Add space at end of add_drivers list for correct dracut.conf
syntax
- Do not remove package docs in config.sh
- rpm_excludedocs should be used for that
- Exclude sdhci-iproc from initrd (bsc#983145)
-------------------------------------------------------------------
Fri Aug 26 11:49:19 UTC 2016 - fvogt@suse.com
- Use sdhost driver on raspberrypi3_aarch64
- Add brcm43430-firmware for raspberrypi3
- Put dtb into tar instead of package
- Only temporary, final solution for DT building not done yet
- Reference the toolchain packages directly and not the pattern
-------------------------------------------------------------------
Thu Jul 28 15:09:27 UTC 2016 - fvogt@suse.com
- Generate X11- (IceWM) images
- Use SLE boot theme
- Use bootstrap section correctly
- Enable use of patterns
- Add packagelist-rpi3.inc for special package selection
- Enable btrfs with compression and fix first boot on rpi3
- Remove rpm_excludedocs
- Enable YaST2 firstboot (configuration in y2firstboot.tar.gz)
- Use "loglevel=3" instead of "quiet splash=silent" (bsc#989951)
-------------------------------------------------------------------
Sun Jun 12 18:28:48 UTC 2016 - agraf@suse.com
- Use kms xorg driver on 64bit rpi3
- Update scripts to current Tumbleweed level
-------------------------------------------------------------------
Wed May 25 11:46:59 UTC 2016 - dmueller@suse.com
- fix raspberrypi3_aarch64 config
-------------------------------------------------------------------
Wed May 4 23:54:17 UTC 2016 - dmueller@suse.com
- updates for raspberrypi3_aarch64
-------------------------------------------------------------------
Fri Apr 22 12:16:43 UTC 2016 - agraf@suse.com
- Don't include ubot-setup-flavor.tgz for rootfs images, as we don't
generate the tgz for them
-------------------------------------------------------------------
Fri Apr 22 07:13:28 UTC 2016 - dmueller@suse.com
- add ca-certificates to JeOS
-------------------------------------------------------------------
Tue Apr 19 08:49:41 UTC 2016 - agraf@suse.com
- Always include uboot-setup-flavor.tgz to ensure we have the scriptlet
that removes rootflags=size=100% from the grub configuration
-------------------------------------------------------------------
Mon Apr 18 08:01:06 UTC 2016 - dmueller@suse.com
- further work on efi-devel flavor
-------------------------------------------------------------------
Sun Apr 17 18:19:57 UTC 2016 - dmueller@suse.com
- add efi-devel aarch64 flavor
- add net-tools-deprecated to all images
-------------------------------------------------------------------
Fri Apr 15 09:09:17 UTC 2016 - dmueller@suse.com
- add raspberrypi3_aarch64 flavor
-------------------------------------------------------------------
Wed Apr 6 07:50:57 UTC 2016 - dmueller@suse.com
- generate kiwi 8.x compatible kiwi hooks
-------------------------------------------------------------------
Fri Apr 1 01:01:54 UTC 2016 - agraf@suse.com
- Use uname for generic zypper repo determination
-------------------------------------------------------------------
Fri Apr 1 00:41:24 UTC 2016 - agraf@suse.com
- Move non-Uboot firstboot scripts to preCallInit.sh
- This fixes EFI images that depend on firstboot scripts, which
means all by now because of the rootflags replacement
-------------------------------------------------------------------
Thu Mar 31 08:07:52 UTC 2016 - schwab@suse.de
- Properly clean up after kpartx in uboot-image-*-install
-------------------------------------------------------------------
Tue Mar 29 22:31:55 UTC 2016 - agraf@suse.com
- Minor pine64 fixes
- Shrink GPT on sunxi systems to make space for SPL
-------------------------------------------------------------------
Tue Mar 29 19:38:59 UTC 2016 - dmueller@suse.com
- fix have-choices for the last tumbleweed updates
-------------------------------------------------------------------
Fri Mar 25 19:58:25 UTC 2016 - dmueller@suse.com
- include brmfmac firmware for RPi 3
-------------------------------------------------------------------
Thu Mar 24 10:49:58 UTC 2016 - agraf@suse.com
- Remove mustang flavor
- Move m400 flavor to JeOS only
- Move to a new naming schema where "-pxe" images build with pxe
- Move m400 -> m400-pxe
- Move midway -> midway-pxe
- Remove highbank (hardware obsolete)
- Remove hip04d01 (unmaintained)
- Remove hip05d02 (upstream by now)
- Move efi.aarch64 to non-pxe
- Add efi-pxe.aarch64 flavor with JeOS only
-------------------------------------------------------------------
Wed Mar 9 14:13:46 UTC 2016 - guillaume@opensuse.org
- Auto load useful modules not auto-loaded for SabreLite:
* Fix HDMI output
* Make use of (imx6q-)cpufreq
-------------------------------------------------------------------
Wed Mar 9 09:29:35 UTC 2016 - agraf@suse.com
- Add pine64 contrib description
-------------------------------------------------------------------
Mon Mar 7 10:20:10 UTC 2016 - guillaume@opensuse.org
- Fix bootargs on 1st boot for Raspberry Pi 1, 2 and 3. (downstream
kernels only)
-------------------------------------------------------------------
Mon Mar 7 10:14:24 UTC 2016 - guillaume@opensuse.org
- Make use of bootkernel var also in scripts in compressed archives
-------------------------------------------------------------------
Fri Mar 4 15:18:25 UTC 2016 - agraf@suse.com
- Change date to YYYY.MM.DD instead (seems more readable)
-------------------------------------------------------------------
Fri Mar 4 09:32:09 UTC 2016 - agraf@suse.com
- move panda target to efi based boot
-------------------------------------------------------------------
Fri Mar 4 00:44:24 UTC 2016 - agraf@suse.com
- Change date to YYYYMMDD.0.0 to make kiwi's version format check happy
-------------------------------------------------------------------
Thu Mar 3 18:11:02 UTC 2016 - dmueller@suse.com
- fix raspberrypi3 flavor
- use date of changelog entry for image version
-------------------------------------------------------------------
Thu Mar 3 15:41:24 UTC 2016 - guillaume@opensuse.org
- Make use of bootkernel var in uboot-image*
-------------------------------------------------------------------
Tue Mar 1 07:37:07 UTC 2016 - agraf@suse.com
- add rootflags=size=100% to have tmpfs span all ram
- allows for bigger initramfs
- strip rootflags=size=100% from kernel cmdline after firstboot
- move firstboot uboot install script to separate file
- add update-bootloader --reinit for arm efi to regenerate bootarm.efi
-------------------------------------------------------------------
Mon Feb 29 23:34:55 UTC 2016 - agraf@suse.com
- put u-boot directly on the SD card at a hard offset on omap
this makes it easier to move to efi
- move beagle* targets to efi based boot
-------------------------------------------------------------------
Mon Feb 29 15:27:47 UTC 2016 - dmueller@suse.com
- add raspberrypi3 flavor
-------------------------------------------------------------------
Mon Feb 29 13:04:57 UTC 2016 - dmueller@suse.com
- remove stripKernel call again which breaks symlink for rebooting
-------------------------------------------------------------------
Thu Feb 25 15:17:29 UTC 2016 - guillaume@opensuse.org
- Raspberrypi:
* Use u-boot defined fdtfile when upstream kernel is used (u-boot
and upstream kernel are now in sync)
* Update u-boot script for the new downstream kernel
* Fix bootargs when downstream kernel is used
-------------------------------------------------------------------
Sat Feb 20 19:18:31 UTC 2016 - dmueller@suse.com
- strip kernel/firmware in initrd
- add DTB for vexpress flavor
- don't strip qemu-cputype-armv6
-------------------------------------------------------------------
Wed Feb 17 12:30:14 UTC 2016 - guillaume@opensuse.org
- Add missing TYPE_LXQT image type definition
-------------------------------------------------------------------
Wed Feb 17 10:04:32 UTC 2016 - guillaume@opensuse.org
- replace ttyO* by ttyS* for omap boards (panda, beagle and beaglebone)
- Keep console on serial for panda and beagle graphical images
-------------------------------------------------------------------
Mon Feb 15 13:18:38 UTC 2016 - dmueller@suse.com
- rename E17-* to E20-*
-------------------------------------------------------------------
Thu Feb 11 07:58:09 UTC 2016 - dmueller@suse.com
- fix multiple-choices for yast2 dependencies
-------------------------------------------------------------------
Thu Feb 4 20:25:30 UTC 2016 - dmueller@suse.com
- relocate initrd for raspberrypi as well
-------------------------------------------------------------------
Wed Feb 3 16:26:12 UTC 2016 - dmueller@suse.com
- remove ohci from arndale image, remove phy-samsung* (was renamed to phy-exynos-*)
-------------------------------------------------------------------
Wed Feb 3 09:54:57 UTC 2016 - guillaume@opensuse.org
- Chromebook: Fix kpartx loop device detection
-------------------------------------------------------------------
Sun Jan 31 20:00:50 UTC 2016 - dmueller@suse.com
- unset initrd_high for RaspberryPi 2 to fix boot
issue (does not support inplace/zero-copy initrd booting)
- set quiet to bootopts to remove annoying audit log on console
-------------------------------------------------------------------
Wed Jan 27 14:47:36 UTC 2016 - dmueller@suse.com
- set skip-verify=true
-------------------------------------------------------------------
Fri Jan 22 12:53:57 UTC 2016 - guillaume@opensuse.org
- Add 'bootkernel="custom"' to kiwi config file to only use wanted
kernel, not kernel-default. (Fix non -default kernel initrd and
boot, such as -lpae)
-------------------------------------------------------------------
Mon Jan 18 02:25:45 UTC 2016 - agraf@suse.com
- Remove rootfstype=ramfs again. Kiwi passes that after firstboot into the
boot parameters of the installed system, overriding dracut's fs detection,
hence making every second-boot mount the rootfs as fstype=ramfs, breaking
the boot...
-------------------------------------------------------------------
Wed Jan 13 03:10:48 UTC 2016 - agraf@suse.com
- Add hikey (Contrib) description
-------------------------------------------------------------------
Wed Jan 13 01:37:21 UTC 2016 - agraf@suse.com
- add rootfstype=ram to all kernel command lines, it's needed for
the firstboot initrd on low ram systems (<2GB for aarch64)
-------------------------------------------------------------------
Tue Jan 12 10:41:11 UTC 2016 - guillaume@opensuse.org
- Do not define 'target' variable in u-boot script (fix cubox-i)
-------------------------------------------------------------------
Wed Dec 23 04:26:22 UTC 2015 - afaerber@suse.de
- Partially revert last change for raspberrypi2
* $bootkernel is unexpectedly not rpi2, comment out the condition
- Apply bootable partition change for Raspberry Pi on firstboot, too
-------------------------------------------------------------------
Tue Dec 22 22:58:02 UTC 2015 - afaerber@suse.de
- kernel-rpi2 does use FDT (by now?)
* Tidy up raspberrypi[2] bootargs while at it
-------------------------------------------------------------------
Tue Dec 22 21:31:43 UTC 2015 - afaerber@suse.de
- Mark second partition bootable also in GPT for Raspberry Pi
* Change the partition name while at it (it's not UEFI)
-------------------------------------------------------------------
Tue Dec 22 04:13:14 UTC 2015 - afaerber@suse.de
- Drop duplicate FAT formatting and file copying for Raspberry Pi
-------------------------------------------------------------------
Sun Dec 20 19:24:33 UTC 2015 - afaerber@suse.de
- Add audit to package list (avoids kernel spam on serial console)
- Mark the second partition bootable for Raspberry Pi.
Recent U-Boot versions check this for determining which partitions
to search extlinux.conf and boot.scr files on.
* Drop obsolete boot.scr on first partition.
Will slightly speed up boot and simplifies JeOS scripts.
- raspberrypi-firmware files are now in /boot/vc
* u-boot-rpi and u-boot-rpi2 files are not yet, conditionalize them
- Include raspberrypi-firmware-branding-openSUSE
* Drop ad-hoc Config.txt generation
-------------------------------------------------------------------
Thu Dec 10 15:57:30 UTC 2015 - dmueller@suse.com
- blacklist xhci_hcd for Arndale boards
-------------------------------------------------------------------
Mon Dec 7 15:17:12 UTC 2015 - agraf@suse.com
- Remove pihwm from Raspberry Pi package list (auxiliary package)
-------------------------------------------------------------------
Mon Dec 7 12:46:59 UTC 2015 - afaerber@suse.de
- Drop Contrib repo for Raspberry Pi (requested by Alex)
- Fix typo in output
-------------------------------------------------------------------
Sat Dec 5 11:07:47 UTC 2015 - cyberorg@opensuse.org
- Use branding-openSUSE for all images
-------------------------------------------------------------------
Fri Nov 27 19:27:41 UTC 2015 - schwab@suse.de
- use oemboot/suse-tumbleweed boot description
- include MozillaFirefox for all archs
-------------------------------------------------------------------
Wed Nov 25 11:41:05 UTC 2015 - dmueller@suse.com
- add oxygen5-icon-theme to resolve choice for E17
-------------------------------------------------------------------
Tue Nov 17 12:52:24 UTC 2015 - dmueller@suse.com
- add irqbalance for thunderx and efi images
-------------------------------------------------------------------
Thu Nov 12 11:37:20 UTC 2015 - mbrugger@suse.com
- fix URL for contrib:thunderx repository
-------------------------------------------------------------------
Thu Nov 12 09:27:56 UTC 2015 - dmueller@suse.com
- fix update repositories for thunderx image
-------------------------------------------------------------------
Wed Oct 28 14:40:00 UTC 2015 - dmueller@suse.com
- reinclude irqbalance for cuboxi
-------------------------------------------------------------------
Thu Oct 22 13:29:04 UTC 2015 - guillaume@opensuse.org
- cuboxi: u-boot: upstream u-boot uses findfdt cmd instead of
autodetectfdt
-------------------------------------------------------------------
Wed Oct 21 08:34:07 UTC 2015 - tbechtold@suse.com
- cuboxi:
* copy u-boot.img at correct address
(see u-boot git tree board/solidrun/mx6cuboxi/README)
* install u-boot-mx6cuboxi instead of u-boot-mx6cubox-i
* don't install irqbalance
* remove contrib repository
-------------------------------------------------------------------
Tue Oct 20 18:38:23 UTC 2015 - dmueller@suse.com
- switch cuboxi to standard kernel/u-boot
-------------------------------------------------------------------
Fri Oct 16 08:18:51 UTC 2015 - guillaume@opensuse.org
- Rpi/Rpi2: pass MAC addr to Linux
-------------------------------------------------------------------
Wed Oct 14 08:06:31 UTC 2015 - guillaume@opensuse.org
- Rework ${fdtfile} usage by adding ${fdtfolder}. This allow to use
default ${fdtfile} definitions from upstream u-boot.
-------------------------------------------------------------------
Wed Oct 7 09:06:02 UTC 2015 - guillaume@opensuse.org
- Fix boot on Beagleboard xM
-------------------------------------------------------------------
Mon Sep 28 09:46:11 UTC 2015 - guillaume@opensuse.org
- Replace libyui-qt-pkg6 by libyui-qt-pkg7
-------------------------------------------------------------------
Mon Sep 28 08:36:33 UTC 2015 - guillaume@opensuse.org
- Odroid:
* Use 'load' command, since ext2load is not available
* Add kernel, fdt and initrd addresses.
-------------------------------------------------------------------
Mon Sep 28 08:36:01 UTC 2015 - guillaume@opensuse.org
- Add libsystemd0 to package list (have choice with libsystemd0-mini)
-------------------------------------------------------------------
Sat Sep 5 13:30:44 UTC 2015 - guillaume@opensuse.org
- Add drivers/pwm/* to initrd for Chromebook to get display working
on 1st boot
-------------------------------------------------------------------
Fri Sep 4 11:02:43 UTC 2015 - dmueller@suse.com
- add JeOS-thunderx, rename from *-thunder
-------------------------------------------------------------------
Thu Sep 3 20:22:10 UTC 2015 - matwey.kornilov@gmail.com
- Set explicit baudrate to console for OMAP serial.
-------------------------------------------------------------------
Wed Sep 2 16:55:35 UTC 2015 - guillaume@opensuse.org
- Add odroid and odroidxu3 support
-------------------------------------------------------------------
Tue Sep 1 13:29:25 UTC 2015 - guillaume@opensuse.org
- Fix force load of modules needed to get display working fine on
chromebook
-------------------------------------------------------------------
Thu Aug 27 14:39:43 UTC 2015 - guillaume@opensuse.org
- Fix corrupted script in cgpt-table-update.tgz
-------------------------------------------------------------------
Mon Aug 17 23:21:16 UTC 2015 - zombah@gmail.com
- Add serial console output cmdline for Chromebook
-------------------------------------------------------------------
Mon Aug 17 13:04:24 UTC 2015 - guillaume@opensuse.org
- Force load of modules needed to get display working fine on chromebook
-------------------------------------------------------------------
Mon Aug 17 09:18:54 UTC 2015 - guillaume@opensuse.org
- Fix Chromebook boot with latest u-boot (u-boot now looks for
bootscripts on bootable partitions only, so flag it bootable)
-------------------------------------------------------------------
Thu Aug 6 16:02:29 UTC 2015 - matwey.kornilov@gmail.com
- Add ${append} to bootargs u-boot env variable in boot.srcipt
This is done to be consistent with KIWI
-------------------------------------------------------------------
Mon Aug 03 15:01:00 UTC 2015 - josua.mayer97@gmail.com
- Add IMX& Contrib repo to Cubox-i images
- boot cubox-i JeOS images to serial console only, graphical ones to the screen
-------------------------------------------------------------------
Tue Jun 30 06:46:23 UTC 2015 - agraf@suse.com
- Add HIP05D02 Contrib
-------------------------------------------------------------------
Tue Jun 16 14:26:14 UTC 2015 - guillaume@opensuse.org
- Fix beagleboard xM boot when validatefdt is run in u-boot script
-------------------------------------------------------------------
Tue Jun 16 10:15:09 UTC 2015 - agraf@suse.com
- use btrfs on EFI AArch64 systems
-------------------------------------------------------------------
Mon Jun 15 15:37:45 UTC 2015 - guillaume@opensuse.org
- 'sudo' package now available for JeOS images too.
-------------------------------------------------------------------
Mon Jun 15 15:27:51 UTC 2015 - guillaume@opensuse.org
- BeagleBone Black: Enable boot on internal eMMC if external uSD
fails
-------------------------------------------------------------------
Sun Jun 14 19:24:56 UTC 2015 - dmueller@suse.com
- switch to tumbleweed download links
-------------------------------------------------------------------
Thu Jun 11 20:17:57 UTC 2015 - guillaume@opensuse.org
- Add tda998x module in config.sh for beaglebone (black) to fix
HDMI output
-------------------------------------------------------------------
Thu Jun 11 08:23:20 UTC 2015 - guillaume@opensuse.org
- Add new packages:
* which
* yast2-firewall
- Wireless packages (wireless-tools, wpa_supplicant) and SuSEfirewall2
are now also available for JeOS too
- Remove OMAP DSP related packages since support has been dropped
from kernel
- Enlightenment packages updates (e17 => e19):
* Replace e17 by enlightenment
* Replace e17-theme-openSUSE by enlightenment-theme-openSUSE
* Replace e17-branding-openSUSE by enlightenment-branding-openSUSE
-------------------------------------------------------------------
Sat May 16 12:54:29 CEST 2015 - xxxxxmichl@googlemail.com
- add support for more Olimex boards.
-------------------------------------------------------------------
Wed Apr 29 21:33:38 UTC 2015 - agraf@suse.com
- remove seattle flavor, efi should cover it now
- move to pure console=ttyAMA0 for efi flavor, only mustang needs ttyS0
- move efi flavor to PXE enabled
-------------------------------------------------------------------
Sat Apr 11 21:00:52 UTC 2015 - agraf@suse.com
- rpi2: Enable hybrid GPT recovery on firstboot
-------------------------------------------------------------------
Thu Apr 9 20:04:16 UTC 2015 - agraf@suse.com
- rpi2: Add rpi2 repo to repo list in installed systems
-------------------------------------------------------------------
Wed Mar 25 19:50:58 UTC 2015 - agraf@suse.com
- m400: Use enp1s0 as eth name
-------------------------------------------------------------------
Wed Mar 25 19:01:03 UTC 2015 - agraf@suse.com
- Add HP m400 Cartridge Contrib support
-------------------------------------------------------------------
Mon Mar 23 17:12:32 UTC 2015 - agraf@suse.com
- Remove mustang contrib repo
-------------------------------------------------------------------
Fri Mar 13 11:02:18 UTC 2015 - guillaume@opensuse.org
- Update post-install script (cgpt kiwi hook) to fix Chromebook
2nd boot
-------------------------------------------------------------------
Thu Feb 26 19:26:06 UTC 2015 - xxxxxmichl@googlemail.com
- add graphics support for Olimex A10-OLinuXino-LIME and
A20-OLinuXIno-LIME2 boards.
-------------------------------------------------------------------
Thu Feb 26 14:59:26 UTC 2015 - guillaume@opensuse.org
- Add more modules to first initrd
-------------------------------------------------------------------
Thu Feb 26 14:50:03 UTC 2015 - guillaume@opensuse.org
- Add modules (ahci and drm) to initrd for SabreLite (in config.sh)
-------------------------------------------------------------------
Thu Feb 26 14:01:20 UTC 2015 - guillaume@opensuse.org
- Add splash screen support in u-boot (enabled and tested on SabreLite)
-------------------------------------------------------------------
Tue Feb 24 09:56:58 UTC 2015 - guillaume@opensuse.org
- Remove redundant 'bootype=bootz' in uboot-image-setup.in
since it is the default value.
-------------------------------------------------------------------
Mon Feb 16 09:03:32 UTC 2015 - guillaume@opensuse.org
- Enhance exynos boards initrd (Chromebook and arndale)
-------------------------------------------------------------------
Mon Feb 16 09:00:27 UTC 2015 - guillaume@opensuse.org
- Rename u-boot-rpib to u-boot-rpi
-------------------------------------------------------------------
Fri Dec 19 19:26:06 UTC 2014 - xxxxxmichl@googlemail.com
- add support for Olimex A10-OLinuXino-LIME and A20-OLinuXIno-LIME2
boards.
-------------------------------------------------------------------
Sun Dec 7 23:05:06 UTC 2014 - agraf@suse.com
- disable firstboot, it's been broken in 90% of the cases where I
deployed an image
-------------------------------------------------------------------
Fri Dec 5 00:07:55 UTC 2014 - agraf@suse.com
- fix grub2 package name for 32bit efi
-------------------------------------------------------------------
Thu Dec 4 16:39:33 UTC 2014 - guillaume@opensuse.org
- chromebook: fix cgpt relative path (not in $PATH) in uboot image
install script
-------------------------------------------------------------------
Thu Dec 4 15:00:01 UTC 2014 - guillaume@opensuse.org
- chromebook: fix uboot image install script (fix path)
-------------------------------------------------------------------
Thu Dec 4 14:13:39 UTC 2014 - agraf@suse.com
- add hip04d01 target
-------------------------------------------------------------------
Thu Dec 4 09:37:32 UTC 2014 - guillaume@opensuse.org
- Chromebook update:
* switch from broken downstream kernel-chromebook to upstream kernel-lpae
* switch from downstream u-boot-chromebook to upstream u-boot-snow
* add missing initrd modules handling (in config.sh) for chromebook and
add USB modules for exynos boards (arndale and chromebook)
* update u-boot script (bootype, fs)
* Update cgpt-table-update.tgz to fix 2nd boot when booted from USB too
* add /etc/modules-load.d/cros-ec-keyb.conf to be able to use the keyboard
-------------------------------------------------------------------
Wed Dec 3 23:58:53 UTC 2014 - agraf@suse.com
- generate pxe files for thunder
- use "thunder" flavor for thunder
-------------------------------------------------------------------
Wed Nov 26 14:17:39 UTC 2014 - agraf@suse.com
- Add helper script to identify unlinked images
-------------------------------------------------------------------
Wed Nov 26 10:37:18 UTC 2014 - guillaume@opensuse.org
- LXQT image: switch from lightdm kde greeter to gtk greeter (fix X start)
-------------------------------------------------------------------
Tue Nov 25 15:12:39 UTC 2014 - guillaume@opensuse.org
- Run validatefdt in u-boot when available (for Beagleboard xM)
-------------------------------------------------------------------
Wed Nov 19 10:10:47 UTC 2014 - guillaume@opensuse.org
- Add LXQt as new desktop image
-------------------------------------------------------------------
Tue Nov 18 17:37:50 UTC 2014 - guillaume@opensuse.org
- Add JeOS.changes file to follow changes
