Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP4:Update
xen.481
546a0107-EFI-allow-retry-of-ExitBootServices-ca...
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File 546a0107-EFI-allow-retry-of-ExitBootServices-call.patch of Package xen.481
References: bsc#904255 # Commit 0540b854f6733759593e829bc3f13c9b45974e32 # Date 2014-11-17 15:07:03 +0100 # Author Jan Beulich <jbeulich@suse.com> # Committer Jan Beulich <jbeulich@suse.com> EFI: allow retry of ExitBootServices() call The specification is kind of vague under what conditions ExitBootServices() may legitimately fail, requiring the OS loader to retry: "If MapKey value is incorrect, ExitBootServices() returns EFI_INVALID_PARAMETER and GetMemoryMap() with ExitBootServices() must be called again. Firmware implementation may choose to do a partial shutdown of the boot services during the first call to ExitBootServices(). EFI OS loader should not make calls to any boot service function other then GetMemoryMap() after the first call to ExitBootServices()." While our code guarantees the map key to be valid, there are systems where a firmware internal notification sent while processing ExitBootServices() reportedly results in changes to the memory map. In that case, make a best effort second try: Avoid any boot service calls other than the two named above, with the possible exception of error paths. Those aren't a problem, since if we end up needing to retry, we're hosed when something goes wrong as much as if we didn't make the retry attempt. For x86, a minimal adjustment to efi_arch_process_memory_map() is needed for it to cope with potentially being called a second time. For arm64, while efi_process_memory_map_bootinfo() is easy to verify that it can safely be called more than once without violating spec constraints, it's not so obvious for fdt_add_uefi_nodes(), hence a step by step approach: - deletion of memory nodes and memory reserve map entries: the 2nd pass shouldn't find any as the 1st one deleted them all, - a "chosen" node should be found as it got added in the 1st pass, - the various "linux,uefi-*" nodes all got added during the 1st pass and hence only their contents may get updated. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Roy Franz <roy.franz@linaro.org> --- a/xen/arch/x86/efi/boot.c +++ b/xen/arch/x86/efi/boot.c @@ -783,9 +783,8 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SY EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *mode_info; EFI_FILE_HANDLE dir_handle; union string section = { NULL }, name; - struct e820entry *e; u64 efer; - bool_t base_video = 0; + bool_t base_video = 0, retry; efi_ih = ImageHandle; efi_bs = SystemTable->BootServices; @@ -1388,68 +1387,78 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SY if ( mbi.mem_upper < xen_phys_start ) blexit(L"Out of static memory"); efi_memmap = (void *)(long)mbi.mem_upper; - status = efi_bs->GetMemoryMap(&efi_memmap_size, efi_memmap, &map_key, - &efi_mdesc_size, &mdesc_ver); - if ( EFI_ERROR(status) ) - PrintErrMesg(L"Cannot obtain memory map", status); - - /* Populate E820 table and check trampoline area availability. */ - e = e820map - 1; - for ( i = 0; i < efi_memmap_size; i += efi_mdesc_size ) + for ( retry = 0; ; retry = 1 ) { - EFI_MEMORY_DESCRIPTOR *desc = efi_memmap + i; - u64 len = desc->NumberOfPages << EFI_PAGE_SHIFT; - u32 type; + struct e820entry *e; + + status = efi_bs->GetMemoryMap(&efi_memmap_size, efi_memmap, &map_key, + &efi_mdesc_size, &mdesc_ver); + if ( EFI_ERROR(status) ) + PrintErrMesg(L"Cannot obtain memory map", status); - switch ( desc->Type ) + /* Populate E820 table and check trampoline area availability. */ + e = e820map - 1; + for ( e820nr = i = 0; i < efi_memmap_size; i += efi_mdesc_size ) { - default: - type = E820_RESERVED; - break; - case EfiConventionalMemory: - case EfiBootServicesCode: - case EfiBootServicesData: - if ( !trampoline_phys && desc->PhysicalStart + len <= 0x100000 && - len >= cfg.size && desc->PhysicalStart + len > cfg.addr ) - cfg.addr = (desc->PhysicalStart + len - cfg.size) & PAGE_MASK; - /* fall through */ - case EfiLoaderCode: - case EfiLoaderData: - if ( desc->Attribute & EFI_MEMORY_WB ) - type = E820_RAM; + EFI_MEMORY_DESCRIPTOR *desc = efi_memmap + i; + u64 len = desc->NumberOfPages << EFI_PAGE_SHIFT; + u32 type; + + switch ( desc->Type ) + { + default: + type = E820_RESERVED; + break; + case EfiConventionalMemory: + case EfiBootServicesCode: + case EfiBootServicesData: + if ( !trampoline_phys && + desc->PhysicalStart + len <= 0x100000 && + len >= cfg.size && + desc->PhysicalStart + len > cfg.addr ) + cfg.addr = (desc->PhysicalStart + len - cfg.size) & + PAGE_MASK; + /* fall through */ + case EfiLoaderCode: + case EfiLoaderData: + if ( desc->Attribute & EFI_MEMORY_WB ) + type = E820_RAM; + else + case EfiUnusableMemory: + type = E820_UNUSABLE; + break; + case EfiACPIReclaimMemory: + type = E820_ACPI; + break; + case EfiACPIMemoryNVS: + type = E820_NVS; + break; + } + if ( e820nr && type == e->type && + desc->PhysicalStart == e->addr + e->size ) + e->size += len; + else if ( !len || e820nr >= E820MAX ) + continue; else - case EfiUnusableMemory: - type = E820_UNUSABLE; - break; - case EfiACPIReclaimMemory: - type = E820_ACPI; - break; - case EfiACPIMemoryNVS: - type = E820_NVS; - break; + { + ++e; + e->addr = desc->PhysicalStart; + e->size = len; + e->type = type; + ++e820nr; + } } - if ( e820nr && type == e->type && - desc->PhysicalStart == e->addr + e->size ) - e->size += len; - else if ( !len || e820nr >= E820MAX ) - continue; - else + if ( !trampoline_phys ) { - ++e; - e->addr = desc->PhysicalStart; - e->size = len; - e->type = type; - ++e820nr; + if ( !cfg.addr ) + blexit(L"No memory for trampoline"); + relocate_trampoline(cfg.addr); } - } - if ( !trampoline_phys ) - { - if ( !cfg.addr ) - blexit(L"No memory for trampoline"); - relocate_trampoline(cfg.addr); - } - status = efi_bs->ExitBootServices(ImageHandle, map_key); + status = efi_bs->ExitBootServices(ImageHandle, map_key); + if ( status != EFI_INVALID_PARAMETER || retry ) + break; + } if ( EFI_ERROR(status) ) PrintErrMesg(L"Cannot exit boot services", status);
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
