Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12-SP5:GA
openssh.10218
openssh.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File openssh.changes of Package openssh.10218
------------------------------------------------------------------- Wed Jan 30 14:18:03 UTC 2019 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com> - Revert recent patch that introduces regressions [bsc#1123028] * Removed openssh-7.2p1-scp-name-validator.patch ------------------------------------------------------------------- Wed Jan 16 14:11:29 UTC 2019 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com> - Security fix: * [bsc#1121816, CVE-2019-6109] scp client spoofing via object name * [bsc#1121818, CVE-2019-6110] scp client spoofing via stderr * [bsc#1121821, CVE-2019-6111] scp client missing received object name validation * Added patch openssh-7.2p1-scp-name-validator.patch ------------------------------------------------------------------- Fri Jan 11 15:09:04 UTC 2019 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com> - Security fix: [bsc#1121571, CVE-2018-20685] * The scp client allows remote SSH servers to bypass intended access restrictions * Added patch openssh-7.2p2-CVE-2018-20685.patch ------------------------------------------------------------------- Fri Oct 26 15:15:44 UTC 2018 - Jason Sikes <jsikes@suse.de> - Stop leaking File descriptors * (bsc#964336) * edited openssh-7.2p2-fips_checks.patch ------------------------------------------------------------------- Fri Oct 19 12:36:22 UTC 2018 - Pedro Monreal Gonzalez <pmonrealgonzalez@suse.com> - sftp-client.c returns wrong error code upon failure [bsc#1091396] * Added openssh-7.6p1-sftp-client-return-code.patch ------------------------------------------------------------------- Tue Oct 9 15:38:38 UTC 2018 - Pedro Monreal <pmonrealgonzalez@suse.com> - Security fix [CVE-2018-15473, bsc#1105010] * OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c. * Added patch openssh-7.2p2-CVE-2018-15473.patch ------------------------------------------------------------------- Thu Jun 28 13:54:04 UTC 2018 - pcerny@suse.com - Prevent DoS due to crashes caused by out-of-sequence NEWKEYS message. (CVE-2016-10708, bsc#1076957) [openssh-7.2p2-out_of_seq_newkeys.patch] - GSSAPI patch cleanup ------------------------------------------------------------------- Wed Dec 13 22:32:19 UTC 2017 - pcerny@suse.com - systemd integration to work around various race conditions (bsc#1048367, bsc#1061061) [openssh-7.2p2-systemd-notify.patch] - Forward port of tcpwrappers support removed with the upgrade to 6.6p1 (bsc#1048982) [openssh-7.2p2-tcpwrappers.patch] Please note that tcpwrappers support will not be available in subsequent major releases of SUSE Linux Enterprise. - Fix for socket forwarding when logging in as root on server-side (bsc#1051559) ------------------------------------------------------------------- Wed Nov 22 23:48:23 UTC 2017 - pcerny@suse.com - FIPS startup selfchecks (bsc#1068310) [openssh-7.2p2-fips_checks.patch] - Silent complaints about unsupported key exchange methods (bsc#1006166) [openssh-7.2p2-fips_fixes.patch] - Stricter checking of operations in read-only mode in sftp server (CVE-2017-15906, bsc#1065000) [openssh-7.2p2-stricter_readonly_sftp.patch] - Refine handling of sockets for X11 forwarding to remove reintroduced CVE-2008-1483 (bsc#1069509) ------------------------------------------------------------------- Tue Sep 26 12:32:08 UTC 2017 - pcerny@suse.com - Test configuration before running daemon to rpevent looping resulting in service shutdown (bsc#1048367) ------------------------------------------------------------------- Wed Jun 28 12:27:08 UTC 2017 - pcerny@suse.com - new switch for printing diagnostic messages in sftp client's batch mode (bsc#1023275) [openssh-7.2p2-sftp_print_diagnostic_messages.patch] - Better fix for core dumps from auditing code when trying to bind to an unavailable port (bsc#1024251) ------------------------------------------------------------------- Wed May 31 14:56:32 UTC 2017 - pcerny@suse.com - sshd.service: Set TasksMax=infinity, as there should be no limit on the amount of tasks sshd can run. ------------------------------------------------------------------- Mon May 15 20:47:29 UTC 2017 - pcerny@suse.com - Fix preauth seccomp separation on mainframes (bsc#1016709) [openssh-7.2p2-s390_hw_crypto_syscalls.patch] [openssh-7.2p2-s390_OpenSSL-ibmpkcs11_syscalls.patch] ------------------------------------------------------------------- Fri Apr 21 00:38:29 UTC 2017 - pcerny@suse.com - enable case-insensitive hostname matching (bsc#1017099) [openssh-7.2p2-ssh_case_insensitive_host_matching.patch] - re-add CAVS tests [openssh-7.2p2-cavstest-ctr.patch] [openssh-7.2p2-cavstest-kdf.patch] ------------------------------------------------------------------- Tue Jan 24 14:18:45 UTC 2017 - pcerny@suse.com - Adding missing pieces for user matching (bsc#1021626) ------------------------------------------------------------------- Thu Jan 5 13:46:37 UTC 2017 - pcerny@suse.com - Properly verify CIDR masks in configuration (bsc#1005893) [openssh-7.2p2-verify_CIDR_address_ranges.patch] - Remove pre-auth compression support from the server to prevent possible cryptographic attacks. (CVE-2016-10012, bsc#1016370) [openssh-7.2p2-disable_preauth_compression.patch] - limit directories for loading PKCS11 modules (CVE-2016-10009, bsc#1016366) [openssh-7.2p2-restrict_pkcs11-modules.patch] - Prevent possible leaks of host private keys to low-privilege process handling authentication (CVE-2016-10011, bsc#1016369) [openssh-7.2p2-prevent_private_key_leakage.patch] - Do not allow unix socket forwarding when running without privilege separation (CVE-2016-10010, bsc#1016368) [openssh-7.2p2-secure_unix_sockets_forwarding.patch] ------------------------------------------------------------------- Tue Nov 8 13:31:30 UTC 2016 - pcerny@suse.com - prevent resource depletion during key exchange (bsc#1005480, CVE-2016-8858) [openssh-7.2p2-kex_resource_depletion.patch] - fix suggested command for removing conflicting server keys from the known_hosts file (bsc#1006221) ------------------------------------------------------------------- Thu Oct 13 12:36:53 UTC 2016 - pcerny@suse.com - enable geteuid{,32} syscalls on mainframes, since it may be called from libica/ibmica on machines with hardware crypto accelerator (bsc#1004258) [openssh-7.2p2-seccomp_geteuid.patch] - fix regression of (bsc#823710) [openssh-7.2p2-audit_fixes.patch] - add slogin (removed upstreams) [openssh-7.2p2-keep_slogin.patch] ------------------------------------------------------------------- Thu Sep 29 23:27:49 UTC 2016 - pcerny@suse.com - remaining patches that were still missing since the update to 7.2p2 (FATE#319675): - allow X forwarding over IPv4 when IPv6 sockets is not available [openssh-7.2p2-X_forward_with_disabled_ipv6.patch] - do not write PID file when not daemonizing [openssh-7.2p2-no_fork-no_pid_file.patch] - use correct options when invoking login [openssh-7.2p2-login_options.patch] - helper application for retrieving users' public keys from an LDAP server [openssh-7.2p2-ldap.patch] - allow forcing permissions over sftp [openssh-7.2p2-sftp_force_permissions.patch] - do not perform run-time checks for OpenSSL API/ABI change [openssh-7.2p2-disable_openssl_abi_check.patch] - suggest commands for cleaning known hosts file [openssh-7.2p2-host_ident.patch] - sftp home chroot patch [openssh-7.2p2-sftp_homechroot.patch] - ssh sessions auditing [openssh-7.2p2-audit.patch] - enable seccomp sandbox on additional architectures [openssh-7.2p2-additional_seccomp_archs.patch] - fix forwarding with IPv6 addresses in DISPLAY (bnc#847710) [openssh-7.2p2-IPv6_X_forwarding.patch] - ignore PAM environment when using login (bsc#975865, CVE-2015-8325) [openssh-7.2p2-ignore_PAM_with_UseLogin.patch] - limit accepted password length (prevents possible DoS) (bsc#992533, CVE-2016-6515) [openssh-7.2p2-limit_password_length.patch] - Prevent user enumeration through the timing of password processing (bsc#989363, CVE-2016-6210) [openssh-7.2p2-prevent_timing_user_enumeration.patch] - Add auditing for PRNG re-seeding [openssh-7.2p2-audit_seed_prng.patch] ------------------------------------------------------------------- Fri Sep 16 12:45:11 UTC 2016 - pcerny@suse.com - FIPS compatibility (no selfchecks, only crypto restrictions) [openssh-7.2p2-fips.patch] - PRNG re-seeding [openssh-7.2p2-seed-prng.patch] - preliminary version of GSSAPI KEX [openssh-7.2p2-gssapi_key_exchange.patch] ------------------------------------------------------------------- Tue Jun 7 16:52:45 UTC 2016 - pcerny@suse.com - enable support for SSHv1 protocol and discourage its usage (bsc#983307) - enable DSA by default for backward compatibility and discourage its usage (bsc#983784) ------------------------------------------------------------------- Mon May 30 00:30:16 UTC 2016 - pcerny@suse.com - enable trusted X11 forwarding by default [openssh-7.2p2-X11_trusted_forwarding.patch] - set UID for lastlog properly [openssh-7.2p2-lastlog.patch] - enable use of PAM by default [openssh-7.2p2-enable_PAM_by_default.patch] - copy command line arguments properly [openssh-7.2p2-saveargv-fix.patch] - do not use pthreads in PAM code [openssh-7.2p2-dont_use_pthreads_in_PAM.patch] - fix paths in documentation [openssh-7.2p2-eal3.patch] - prevent race consitions triggered by SIGALRM [openssh-7.2p2-blocksigalrm.patch] - do send and accept locale environment variables by default [openssh-7.2p2-send_locale.patch] - handle hostnames changes during X forwarding [openssh-7.2p2-hostname_changes_when_forwarding_X.patch] - try to remove xauth cookies on exit [openssh-7.2p2-remove_xauth_cookies_on_exit.patch] - properly format pts names for ?tmp? log files [openssh-7.2p2-pts_names_formatting.patch] - check locked accounts when using PAM [openssh-7.2p2-pam_check_locks.patch] - chenge default PermitRootLogin to 'yes' to prevent unwanted surprises on updates from older versions. See README.SUSE for details [openssh-7.2p2-allow_root_password_login.patch] - Disable DH parameters under 2048 bits by default and allow lowering the limit back to the RFC 4419 specified minimum through an option (bsc#932483, bsc#948902) [openssh-7.2p2-disable_short_DH_parameters.patch] - Add getuid() and stat() syscalls to the seccomp filter (bsc#912436) [openssh-7.2p2-seccomp_getuid.patch, openssh-7.2p2-seccomp_stat.patch] ------------------------------------------------------------------- Sun Apr 17 23:27:51 UTC 2016 - pcerny@suse.com - upgrade to 7.2p2 (FATE#319675) upstream package without any SUSE patches Distilled upstream log: - OpenSSH 6.7 Potentially-incompatible changes: * sshd(8): The default set of ciphers and MACs has been altered to remove unsafe algorithms. In particular, CBC ciphers and arcfour* are disabled by default. The full set of algorithms remains available if configured explicitly via the Ciphers and MACs sshd_config options. * sshd(8): Support for tcpwrappers/libwrap has been removed. * OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections using the curve25519-sha256@libssh.org KEX exchange method to fail when connecting with something that implements the specification correctly. OpenSSH 6.7 disables this KEX method when speaking to one of the affected versions. New Features: * ssh(1), sshd(8): Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. * ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for ED25519 key types. * sftp(1): Allow resumption of interrupted uploads. * ssh(1): When rekeying, skip file/DNS lookups of the hostkey if it is the same as the one sent during initial key exchange * sshd(8): Allow explicit ::1 and 127.0.0.1 forwarding bind addresses when GatewayPorts=no; allows client to choose address family * sshd(8): Add a sshd_config PermitUserRC option to control whether ~/.ssh/rc is executed, mirroring the no-user-rc authorized_keys option * ssh(1): Add a %C escape sequence for LocalCommand and ControlPath that expands to a unique identifer based on a hash of the tuple of (local host, remote user, hostname, port). Helps avoid exceeding miserly pathname limits for Unix domain sockets in multiplexing control paths * sshd(8): Make the "Too many authentication failures" message include the user, source address, port and protocol in a format similar to the authentication success / failure messages Bugfixes: * sshd(8): Fix remote forwarding with the same listen port but different listen address. * ssh(1): Fix inverted test that caused PKCS#11 keys that were explicitly listed in ssh_config or on the commandline not to be preferred. * ssh-keygen(1): Fix bug in KRL generation: multiple consecutive revoked certificate serial number ranges could be serialised to an invalid format. Readers of a broken KRL caused by this bug will fail closed, so no should-have-been-revoked key will be accepted. * ssh(1): Reflect stdio-forward ("ssh -W host:port ...") failures in exit status. Previously we were always returning 0 * ssh(1), ssh-keygen(1): Make Ed25519 keys' title fit properly in the randomart border * ssh-agent(1): Only cleanup agent socket in the main agent process and not in any subprocesses it may have started (e.g. forked askpass). Fixes agent sockets being zapped when askpass processes fatal() * ssh-add(1): Make stdout line-buffered; saves partial output getting lost when ssh-add fatal()s part-way through (e.g. when listing keys from an agent that supports key types that ssh-add doesn't) * ssh-keygen(1): When hashing or removing hosts, don't choke on @revoked markers and don't remove @cert-authority markers * ssh(1): Don't fatal when hostname canonicalisation fails and a ProxyCommand is in use; continue and allow the ProxyCommand to connect anyway (e.g. to a host with a name outside the DNS behind a bastion) * scp(1): When copying local->remote fails during read, don't send uninitialised heap to the remote end. * sftp(1): Fix fatal "el_insertstr failed" errors when tab-completing filenames with a single quote char somewhere in the string * ssh-keyscan(1): Scan for Ed25519 keys by default. * ssh(1): When using VerifyHostKeyDNS with a DNSSEC resolver, down-convert any certificate keys to plain keys and attempt SSHFP resolution. Prevents a server from skipping SSHFP lookup and forcing a new-hostkey dialog by offering only certificate keys. - OpenSSH 6.8 Potentially-incompatible changes: * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features: * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes: * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages - OpenSSH 6.9 Security: * ssh(1): when forwarding X11 connections with ForwardX11Trusted=no, connections made after ForwardX11Timeout expired could be permitted and no longer subject to XSECURITY restrictions because of an ineffective timeout check in ssh(1) coupled with "fail open" behaviour in the X11 server when clients attempted connections with expired credentials. This problem was reported by Jann Horn. * ssh-agent(1): fix weakness of agent locking (ssh-add -x) to password guessing by implementing an increasing failure delay, storing a salted hash of the password rather than the password itself and using a timing-safe comparison function for verifying unlock attempts. This problem was reported by Ryan Castellucci. New Features: * ssh(1), sshd(8): promote chacha20-poly1305@openssh.com to be the default cipher * sshd(8): support admin-specified arguments to AuthorizedKeysCommand * sshd(8): add AuthorizedPrincipalsCommand that allows retrieving authorized principals information from a subprocess rather than a file. * ssh(1), ssh-add(1): support PKCS#11 devices with external PIN entry devices * sshd(8): allow GSSAPI host credential check to be relaxed for multihomed hosts via GSSAPIStrictAcceptorCheck option * ssh-keygen(1): support "ssh-keygen -lF hostname" to search known_hosts and print key hashes rather than full keys. * ssh-agent(1): add -D flag to leave ssh-agent in foreground without enabling debug mode Bugfixes: * ssh(1), sshd(8): deprecate legacy SSH2_MSG_KEX_DH_GEX_REQUEST_OLD message and do not try to use it against some 3rd-party SSH implementations that use it (older PuTTY, WinSCP). * Many fixes for problems caused by compile-time deactivation of SSH1 support (including bz#2369) * ssh(1), sshd(8): cap DH-GEX group size at 4Kbits for Cisco implementations as some would fail when attempting to use group sizes >4K * ssh(1): fix out-of-bound read in EscapeChar configuration option parsing * sshd(8): fix application of PermitTunnel, LoginGraceTime, AuthenticationMethods and StreamLocalBindMask options in Match blocks * ssh(1), sshd(8): improve disconnection message on TCP reset; bz#2257 * ssh(1): remove failed remote forwards established by muliplexing from the list of active forwards * sshd(8): make parsing of authorized_keys "environment=" options independent of PermitUserEnv being enabled * sshd(8): fix post-auth crash with permitopen=none * ssh(1), ssh-add(1), ssh-keygen(1): allow new-format private keys to be encrypted with AEAD ciphers * ssh(1): allow ListenAddress, Port and AddressFamily configuration options to appear in any order * sshd(8): check for and reject missing arguments for VersionAddendum and ForceCommand * ssh(1), sshd(8): don't treat unknown certificate extensions as fatal * ssh-keygen(1): make stdout and stderr output consistent * ssh(1): mention missing DISPLAY environment in debug log when X11 forwarding requested * sshd(8): correctly record login when UseLogin is set * sshd(8): Add some missing options to sshd -T output and fix output of VersionAddendum and HostCertificate. bz#2346 * Document and improve consistency of options that accept a "none" argument" TrustedUserCAKeys, RevokedKeys (bz#2382), AuthorizedPrincipalsFile (bz#2288) * ssh(1): include remote username in debug output * sshd(8): avoid compatibility problem with some versions of Tera Term, which would crash when they received the hostkeys notification message (hostkeys-00@openssh.com) * sshd(8): mention ssh-keygen -E as useful when comparing legacy MD5 host key fingerprints * ssh(1): clarify pseudo-terminal request behaviour and use make manual language consistent * ssh(1): document that the TERM environment variable is not subject to SendEnv and AcceptEnv - OpenSSH 7.0: This focuses primarily on deprecating weak, legacy and/or unsafe cryptography. Security: * sshd(8): OpenSSH 6.8 and 6.9 incorrectly set TTYs to be world- writable. Local attackers may be able to write arbitrary messages to logged-in users, including terminal escape sequences. Reported by Nikolay Edigaryev. * sshd(8): Portable OpenSSH only: Fixed a privilege separation weakness related to PAM support. Attackers who could successfully compromise the pre-authentication process for remote code execution and who had valid credentials on the host could impersonate other users. Reported by Moritz Jodeit. * sshd(8): Portable OpenSSH only: Fixed a use-after-free bug related to PAM support that was reachable by attackers who could compromise the pre-authentication process for remote code execution. Also reported by Moritz Jodeit. * sshd(8): fix circumvention of MaxAuthTries using keyboard- interactive authentication. By specifying a long, repeating keyboard-interactive "devices" string, an attacker could request the same authentication method be tried thousands of times in a single pass. The LoginGraceTime timeout in sshd(8) and any authentication failure delays implemented by the authentication mechanism itself were still applied. Found by Kingcope. Potentially-incompatible Changes: * Support for the legacy SSH version 1 protocol is disabled by default at compile time. * Support for the 1024-bit diffie-hellman-group1-sha1 key exchange is disabled by default at run-time. It may be re-enabled using the instructions in README.legacy or http://www.openssh.com/legacy.html * Support for ssh-dss, ssh-dss-cert-* host and user keys is disabled by default at run-time. These may be re-enabled using the instructions at http://www.openssh.com/legacy.html * Support for the legacy v00 cert format has been removed. * The default for the sshd_config(5) PermitRootLogin option has changed from "yes" to "prohibit-password". * PermitRootLogin=without-password/prohibit-password now bans all interactive authentication methods, allowing only public-key, hostbased and GSSAPI authentication (previously it permitted keyboard-interactive and password-less authentication if those were enabled). New Features: * ssh_config(5): add PubkeyAcceptedKeyTypes option to control which public key types are available for user authentication. * sshd_config(5): add HostKeyAlgorithms option to control which public key types are offered for host authentications. * ssh(1), sshd(8): extend Ciphers, MACs, KexAlgorithms, HostKeyAlgorithms, PubkeyAcceptedKeyTypes and HostbasedKeyTypes options to allow appending to the default set of algorithms instead of replacing it. Options may now be prefixed with a '+' to append to the default, e.g. "HostKeyAlgorithms=+ssh-dss". * sshd_config(5): PermitRootLogin now accepts an argument of 'prohibit-password' as a less-ambiguous synonym of 'without- password'. Bugfixes: * ssh(1), sshd(8): add compatability workarounds for Cisco and more PuTTY versions. * Fix some omissions and errors in the PROTOCOL and PROTOCOL.mux documentation relating to Unix domain socket forwarding * ssh(1): Improve the ssh(1) manual page to include a better description of Unix domain socket forwarding * ssh(1), ssh-agent(1): skip uninitialised PKCS#11 slots, fixing failures to load keys when they are present. * ssh(1), ssh-agent(1): do not ignore PKCS#11 hosted keys that wth empty CKA_ID * sshd(8): clarify documentation for UseDNS option - OpenSSH 7.1: Security: * sshd(8): OpenSSH 7.0 contained a logic error in PermitRootLogin= prohibit-password/without-password that could, depending on compile-time configuration, permit password authentication to root while preventing other forms of authentication. This problem was reported by Mantas Mikulenas. Bugfixes: * ssh(1), sshd(8): add compatability workarounds for FuTTY * ssh(1), sshd(8): refine compatability workarounds for WinSCP * Fix a number of memory faults (double-free, free of uninitialised memory, etc) in ssh(1) and ssh-keygen(1). Reported by Mateusz Kocielski. - OpenSSH 7.1p2: * SECURITY: ssh(1): The OpenSSH client code between 5.4 and 7.1 contains experimential support for resuming SSH-connections (roaming). The matching server code has never been shipped, but the client code was enabled by default and could be tricked by a malicious server into leaking client memory to the server, including private client user keys. The authentication of the server host key prevents exploitation by a man-in-the-middle, so this information leak is restricted to connections to malicious or compromised servers. MITIGATION: For OpenSSH >= 5.4 the vulnerable code in the client can be completely disabled by adding 'UseRoaming no' to the gobal ssh_config(5) file, or to user configuration in ~/.ssh/config, or by passing -oUseRoaming=no on the command line. PATCH: See below for a patch to disable this feature (Disabling Roaming in the Source Code). This problem was reported by the Qualys Security Advisory team. * SECURITY: Eliminate the fallback from untrusted X11-forwarding to trusted forwarding for cases when the X server disables the SECURITY extension. Reported by Thomas Hoger. * SECURITY: Fix an out of-bound read access in the packet handling code. Reported by Ben Hawkes. * PROTOCOL: Correctly interpret the 'first_kex_follows' option during the intial key exchange. Reported by Matt Johnston. * Further use of explicit_bzero has been added in various buffer handling code paths to guard against compilers aggressively doing dead-store removal. Potentially-incompatible changes: * This release disables a number of legacy cryptographic algorithms by default in ssh: + Several ciphers blowfish-cbc, cast128-cbc, all arcfour variants and the rijndael-cbc aliases for AES. + MD5-based and truncated HMAC algorithms. - OpenSSH 7.2: Security: * ssh(1), sshd(8): remove unfinished and unused roaming code (was already forcibly disabled in OpenSSH 7.1p2). * ssh(1): eliminate fallback from untrusted X11 forwarding to trusted forwarding when the X server disables the SECURITY extension. * ssh(1), sshd(8): increase the minimum modulus size supported for diffie-hellman-group-exchange to 2048 bits. * sshd(8): pre-auth sandboxing is now enabled by default (previous releases enabled it for new installations via sshd_config). New Features: * all: add support for RSA signatures using SHA-256/512 hash algorithms based on draft-rsa-dsa-sha2-256-03.txt and draft-ssh-ext-info-04.txt. * ssh(1): Add an AddKeysToAgent client option which can be set to 'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a private key that is used during authentication will be added to ssh-agent if it is running (with confirmation enabled if set to 'confirm'). * sshd(8): add a new authorized_keys option "restrict" that includes all current and future key restrictions (no-*-forwarding, etc.). Also add permissive versions of the existing restrictions, e.g. "no-pty" -> "pty". This simplifies the task of setting up restricted keys and ensures they are maximally-restricted, regardless of any permissions we might implement in the future. * ssh(1): add ssh_config CertificateFile option to explicitly list certificates. bz#2436 * ssh-keygen(1): allow ssh-keygen to change the key comment for all supported formats. * ssh-keygen(1): allow fingerprinting from standard input, e.g. "ssh-keygen -lf -" * ssh-keygen(1): allow fingerprinting multiple public keys in a file, e.g. "ssh-keygen -lf ~/.ssh/authorized_keys" bz#1319 * sshd(8): support "none" as an argument for sshd_config Foreground and ChrootDirectory. Useful inside Match blocks to override a global default. bz#2486 * ssh-keygen(1): support multiple certificates (one per line) and reading from standard input (using "-f -") for "ssh-keygen -L" * ssh-keyscan(1): add "ssh-keyscan -c ..." flag to allow fetching certificates instead of plain keys. * ssh(1): better handle anchored FQDNs (e.g. 'cvs.openbsd.org') in hostname canonicalisation - treat them as already canonical and remove the trailing '.' before matching ssh_config. Bugfixes: * sftp(1): existing destination directories should not terminate recursive uploads (regression in openssh 6.8) * ssh(1), sshd(8): correctly send back SSH2_MSG_UNIMPLEMENTED replies to unexpected messages during key exchange. * ssh(1): refuse attempts to set ConnectionAttempts=0, which does not make sense and would cause ssh to print an uninitialised stack variable. * ssh(1): fix errors when attempting to connect to scoped IPv6 addresses with hostname canonicalisation enabled. * sshd_config(5): list a couple more options usable in Match blocks. * sshd(8): fix "PubkeyAcceptedKeyTypes +..." inside a Match block. * ssh(1): expand tilde characters in filenames passed to -i options before checking whether or not the identity file exists. Avoids confusion for cases where shell doesn't expand (e.g. "-i ~/file" vs. "-i~/file"). * ssh(1): do not prepend "exec" to the shell command run by "Match exec" in a config file, which could cause some commands to fail in certain environments. * ssh-keyscan(1): fix output for multiple hosts/addrs on one line when host hashing or a non standard port is in use * sshd(8): skip "Could not chdir to home directory" message when ChrootDirectory is active. * ssh(1): include PubkeyAcceptedKeyTypes in ssh -G config dump. * sshd(8): avoid changing TunnelForwarding device flags if they are already what is needed; makes it possible to use tun/tap networking as non-root user if device permissions and interface flags are pre-established * ssh(1), sshd(8): RekeyLimits could be exceeded by one packet. * ssh(1): fix multiplexing master failure to notice client exit. * ssh(1), ssh-agent(1): avoid fatal() for PKCS11 tokens that present empty key IDs. * sshd(8): avoid printf of NULL argument. * ssh(1), sshd(8): allow RekeyLimits larger than 4GB. * ssh-keygen(1): sshd(8): fix several bugs in (unused) KRL signature support. * ssh(1), sshd(8): fix connections with peers that use the key exchange guess feature of the protocol. * sshd(8): include remote port number in log messages. * ssh(1): don't try to load SSHv1 private key when compiled without SSHv1 support. * ssh-agent(1), ssh(1): fix incorrect error messages during key loading and signing errors. * ssh-keygen(1): don't leave empty temporary files when performing known_hosts file edits when known_hosts doesn't exist. * sshd(8): correct packet format for tcpip-forward replies for requests that don't allocate a port * ssh(1), sshd(8): fix possible hang on closed output. * ssh(1): expand %i in ControlPath to UID. * ssh(1), sshd(8): fix return type of openssh_RSA_verify. * ssh(1), sshd(8): fix some option parsing memory leaks. * ssh(1): add a some debug output before DNS resolution; it's a place where ssh could previously silently stall in cases of unresponsive DNS servers. * ssh(1): remove spurious newline in visual hostkey. * ssh(1): fix printing (ssh -G ...) of HostKeyAlgorithms=+... * ssh(1): fix expansion of HostkeyAlgorithms=+... Documentation: * ssh_config(5), sshd_config(5): update default algorithm lists to match current reality. * ssh(1): mention -Q key-plain and -Q key-cert query options. * sshd_config(8): more clearly describe what AuthorizedKeysFile=none does. * ssh_config(5): better document ExitOnForwardFailure. * sshd(5): mention internal DH-GEX fallback groups in manual. * sshd_config(5): better description for MaxSessions option. Portability: * sshd(8): fix multiple authentication using S/Key. - OpenSSH 7.2p2: Security: * sshd(8): sanitise X11 authentication credentials to avoid xauth command injection when X11Forwarding is enabled. - (removing patches from previous version: openssh-6.6p1-X11-forwarding.patch openssh-6.6p1-X_forward_with_disabled_ipv6.patch openssh-6.6p1-audit1-remove_duplicit_audit.patch openssh-6.6p1-audit2-better_audit_of_user_actions.patch openssh-6.6p1-audit3-key_auth_usage-fips.patch openssh-6.6p1-audit3-key_auth_usage.patch openssh-6.6p1-audit4-kex_results-fips.patch openssh-6.6p1-audit4-kex_results.patch openssh-6.6p1-audit5-session_key_destruction.patch openssh-6.6p1-audit6-server_key_destruction.patch openssh-6.6p1-audit7-libaudit_compat.patch openssh-6.6p1-audit8-libaudit_dns_timeouts.patch openssh-6.6p1-blocksigalrm.patch openssh-6.6p1-curve25519-6.6.1p1.patch openssh-6.6p1-default-protocol.patch openssh-6.6p1-disable-openssl-abi-check.patch openssh-6.6p1-disable_roaming.patch openssh-6.6p1-eal3.patch openssh-6.6p1-fingerprint_hash.patch openssh-6.6p1-fips-checks.patch openssh-6.6p1-fips.patch openssh-6.6p1-gssapi_key_exchange.patch openssh-6.6p1-gssapimitm.patch openssh-6.6p1-host_ident.patch openssh-6.6p1-key-converter.patch openssh-6.6p1-lastlog.patch openssh-6.6p1-ldap.patch openssh-6.6p1-login_options.patch openssh-6.6p1-no_fork-no_pid_file.patch openssh-6.6p1-pam-check-locks.patch openssh-6.6p1-pam-fix2.patch openssh-6.6p1-pam-fix3.patch openssh-6.6p1-pts.patch openssh-6.6p1-saveargv-fix.patch openssh-6.6p1-seccomp_getuid.patch openssh-6.6p1-seccomp_stat.patch openssh-6.6p1-seed-prng.patch openssh-6.6p1-send_locale.patch openssh-6.6p1-sftp_force_permissions.patch openssh-6.6p1-sftp_homechroot.patch openssh-6.6p1-xauth.patch openssh-6.6p1-xauthlocalhostname.patch) ------------------------------------------------------------------- Thu Apr 7 22:49:02 UTC 2016 - pcerny@suse.com - Correctly parse GSSAPI KEX algorithms (bsc#961368) - Sanitise input for xauth(1) (bsc#970632, CVE-2016-3115) [-sanitise_xauth_input] - prevent X11 SECURITY circumvention when forwarding X11 connections (bsc#962313, CVE-2016-1908) [-untrusted_X_forwarding] - more verbose FIPS mode/CC related documentation in README.FIPS (bsc#965576, bsc#960414) - fix PRNG re-seeding (bsc#960414, bsc#729190) - Disable DH parameters under 2048 bits by default and allow lowering the limit back to the RFC 4419 specified minimum through an option (bsc#932483, bsc#948902) [-disable_DH_under_1536b -> -disable_short_DH_parameters] - ignore PAM environment when using login (bsc#975865, CVE-2015-8325) [-ignore_PAM_with_UseLogin] ------------------------------------------------------------------- Tue Mar 8 12:01:51 UTC 2016 - pcerny@suse.com - fix minor problems (bsc#945493) - fix postun script of main package (bsc#945484) - fix crashes when /proc is not available (bsc#947458) - rename and comment the roaming patch (CVE-2016-077-7_8 to -disable_roaming) ------------------------------------------------------------------- Wed Jan 13 15:40:29 UTC 2016 - jsegitz@novell.com - CVE-2016-0777, bsc#961642, CVE-2016-0778, bsc#961645 Added CVE-2016-077-7_8.patch to disable the roaming code to prevent information leak and buffer overflow ------------------------------------------------------------------- Fri Jul 31 15:04:49 UTC 2015 - pcerny@suse.com - Maintenance update * better timeouting of X11 forwards (CVE-2015-5352/bsc#936695) [-X11_forwarding_timeout] and hardening of ssh-agent(1) locking (bsc#936695) [-agent_locking_hardening] * removing and disabling short DH parameters (bsc#932483) [-disable_DH_under_1536b, -remove_moduli_under_1536b] * disable accdess to procfs from sftp (bsc#903649) [-sftp_procfs_restrictions] * Allow each keyboard authentication method to be used only once per login (CVE-2015-5600/bsc#938746) [-use_each_kbd_method_just_once] * Don't resend username to PAM, it can be misused for privilege escalation (CVE-2015-6563/bsc#943010) [-pam_privsep_dont_resend_username] * Prevent possible use-after-free in PAM authentication monitor (CVE-2015-6564/bsc#943006) [-pam_privsep_auth_uaf] ------------------------------------------------------------------- Thu May 14 16:02:34 UTC 2015 - pcerny@suse.com - use %restart_on_update in the trigger script ------------------------------------------------------------------- Fri Apr 10 13:15:05 UTC 2015 - pcerny@suse.com - Fix dependencies of the main package and the -fips subpackage to include exact build number, so that mismatching hashes are removed on upgrade. (bsc#924476) ------------------------------------------------------------------- Tue Feb 10 00:02:46 UTC 2015 - pcerny@suse.com - CAVS test for KDF (bsc#916905) [-cavstest-kdf.patch] - CAVS related parts now reside in the -cavs subpackage - changing license to 2-clause BSD and MIT, since that reflects better what the code is licenced under ------------------------------------------------------------------- Fri Feb 6 01:21:03 UTC 2015 - pcerny@suse.com - Change FIPS integrity tests to use HMAC instead of plain hash (bsc#916473) ------------------------------------------------------------------- Tue Jan 13 11:26:46 UTC 2015 - pcerny@suse.com - Add hmac-sha1-etm to MACs available inthe FIPS 140-2 mode (bsc#912489) - allow stat() syscall pulled in by OpenSSL certification (bsc#912436, bsc#855676) [-seccomp_stat patch] - enable building without auditing support ------------------------------------------------------------------- Tue Oct 28 03:01:37 UTC 2014 - pcerny@suse.com - key exchange modifications for FIPS ------------------------------------------------------------------- Thu Aug 7 18:58:41 UTC 2014 - pcerny@suse.com - change FIPS checksum files and subpackage naming (bnc#856316) ------------------------------------------------------------------- Fri Jul 25 19:08:28 UTC 2014 - pcerny@suse.com - ssh(1) - correct FIPS checks to prevent connection fails when protocol version is not explicitly requested (bnc#876704) - ssh-keygen(1) - do not create DSA and RSA1 keys in FIPS mode when generating all server keys (bnc#886845) - fix SUSE spelling (bnc#889014) ------------------------------------------------------------------- Fri Jul 4 12:44:05 UTC 2014 - pcerny@suse.com - Prevent other possible crashes in audit code due to abnormal execution paths (generalized previous fix for bnc#832628) ------------------------------------------------------------------- Fri Jun 13 17:27:49 UTC 2014 - pcerny@suse.com - exit sshd normally when port is already in use (bnc#832628) - fix forwarding with IPv6 addresses in DISPLAY (bnc#847710) [-IPv6_X_forwarding.patch] - check SSHFP DNS records even for server certificates (bnc#870532, CVE-2014-2653) [-check_sshfp_for_certs.patch] - removing the key converter (which hasn't been built since the update to 6.5p1) patch from sources [-key-converter.patch] ------------------------------------------------------------------- Thu Apr 24 01:33:45 UTC 2014 - pcerny@suse.com - curve25519 key exchange fix (-curve25519-6.6.1p1.patch) - patch re-ordering (-audit3-key_auth_usage-fips.patch, -audit4-kex_results-fips.patch) - remove uneeded dependency on the OpenLDAP server (openldap2) in the helpers subpackage ------------------------------------------------------------------- Fri Apr 11 21:50:51 UTC 2014 - pcerny@suse.com - update to 6.6p1 Security: * sshd(8): when using environment passing with a sshd_config(5) AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be tricked into accepting any enviornment variable that contains the characters before the wildcard character. Features since 6.5p1: * ssh(1), sshd(8): removal of the J-PAKE authentication code, which was experimental, never enabled and has been unmaintained for some time. * ssh(1): skip 'exec' clauses other clauses predicates failed to match while processing Match blocks. * ssh(1): if hostname canonicalisation is enabled and results in the destination hostname being changed, then re-parse ssh_config(5) files using the new destination hostname. This gives 'Host' and 'Match' directives that use the expanded hostname a chance to be applied. Bugfixes: * ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in ssh -W. bz#2200, debian#738692 * sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace sandbox modes, as it is reachable if the connection is terminated during the pre-auth phase. * ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum parsing. Minimum key length checks render this bug unexploitable to compromise SSH 1 sessions. * sshd_config(5): clarify behaviour of a keyword that appears in multiple matching Match blocks. bz#2184 * ssh(1): avoid unnecessary hostname lookups when canonicalisation is disabled. bz#2205 * sshd(8): avoid sandbox violation crashes in GSSAPI code by caching the supported list of GSSAPI mechanism OIDs before entering the sandbox. bz#2107 * ssh(1): fix possible crashes in SOCKS4 parsing caused by assumption that the SOCKS username is nul-terminated. * ssh(1): fix regression for UsePrivilegedPort=yes when BindAddress is not specified. * ssh(1), sshd(8): fix memory leak in ECDSA signature verification. * ssh(1): fix matching of 'Host' directives in ssh_config(5) files to be case-insensitive again (regression in 6.5). - FIPS checks in sftp-server ------------------------------------------------------------------- Mon Mar 31 01:22:21 UTC 2014 - pcerny@suse.com - FIPS checks during ssh client and daemon startup (-fips-checks.patch) ------------------------------------------------------------------- Mon Mar 17 02:21:13 UTC 2014 - pcerny@suse.com - re-enabling the GSSAPI Key Exchange patch ------------------------------------------------------------------- Fri Feb 28 12:59:27 UTC 2014 - pcerny@suse.com - re-enabling FIPS-enablement patch - enable X11 forwarding when IPv6 is present but disabled on server (bnc#712683, FATE#315036) ------------------------------------------------------------------- Tue Feb 18 12:56:31 UTC 2014 - pcerny@suse.com - re-enabling the seccomp sandbox (allowing use of getuid the syscall) ------------------------------------------------------------------- Tue Feb 18 12:31:58 UTC 2014 - pcerny@suse.com - disabling seccomp sandboxing which doesn't work properly on SLE ------------------------------------------------------------------- Wed Feb 12 01:24:16 UTC 2014 - pcerny@suse.com - Update to 6.5p1 Features since 6.4p1: * ssh(1), sshd(8): support for key exchange using ECDH in Daniel Bernstein's Curve25519; default when both the client and server support it. * ssh(1), sshd(8): support for Ed25519 as a public key type fo rboth server and client. Ed25519 is an EC signature offering better security than ECDSA and DSA and good performance. * Add a new private key format that uses a bcrypt KDF to better protect keys at rest. Used unconditionally for Ed25519 keys, on demand for other key types via the -o ssh-keygen(1) option. Intended to become default in the near future. Details documented in PROTOCOL.key. * ssh(1), sshd(8): new transport cipher "chacha20-poly1305@openssh.com" combining Daniel Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an authenticated encryption mode. Details documented PROTOCOL.chacha20poly1305. * ssh(1), sshd(8): refuse RSA keys from old proprietary clients and servers that use the obsolete RSA+MD5 signature scheme. It will still be possible to connect with these clients/servers but only DSA keys will be accepted, and OpenSSH will refuse connection entirely in a future release. * ssh(1), sshd(8): refuse old proprietary clients and servers that use a weaker key exchange hash calculation. * ssh(1): increase the size of the Diffie-Hellman groups requested for each symmetric key size. New values from NIST Special Publication 800-57 with the upper limit specified by RFC4419. * ssh(1), ssh-agent(1): support pkcs#11 tokens that only provide X.509 certs instead of raw public keys (requested as bz#1908). * ssh(1): new ssh_config(5) "Match" keyword that allows conditional configuration to be applied by matching on hostname, user and result of arbitrary commands. * ssh(1): support for client-side hostname canonicalisation using a set of DNS suffixes and rules in ssh_config(5). This allows unqualified names to be canonicalised to fully-qualified domain names to eliminate ambiguity when looking up keys in known_hosts or checking host certificate names. * sftp-server(8): ability to whitelist and/or blacklist sftp protocol requests by name. * sftp-server(8): sftp "fsync@openssh.com" to support calling fsync(2) on an open file handle. * sshd(8): ssh_config(5) PermitTTY to disallow TTY allocation, mirroring the longstanding no-pty authorized_keys option. * ssh(1): ssh_config ProxyUseFDPass option that supports the use of ProxyCommands that establish a connection and then pass a connected file descriptor back to ssh(1). This allows the ProxyCommand to exit rather than staying around to transfer data. Bugfixes since 6.4p1: * ssh(1), sshd(8): fix potential stack exhaustion caused by nested certificates. * ssh(1): bz#1211: make BindAddress work with UsePrivilegedPort. * sftp(1): bz#2137: fix the progress meter for resumed transfer. * ssh-add(1): bz#2187: do not request smartcard PIN when removing keys from ssh-agent. * sshd(8): bz#2139: fix re-exec fallback when original sshd binary cannot be executed. * ssh-keygen(1): make relative-specified certificate expiry times relative to current time and not the validity start time. * sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match block. * sftp(1): bz#2129: symlinking a file would incorrectly canonicalise the target path. * ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11 agent helper executable. * sshd(8): improve logging of sessions to include the user name, remote host and port, the session type (shell, command, etc.) and allocated TTY (if any). * sshd(8): bz#1297: tell the client (via a debug message) when their preferred listen address has been overridden by the server's GatewayPorts setting. * sshd(8): bz#2162: include report port in bad protocol banner message. * sftp(1): bz#2163: fix memory leak in error path in do_readdir(). * sftp(1): bz#2171: don't leak file descriptor on error. * sshd(8): include the local address and port in "Connection from ..." message (only shown at loglevel>=verbose). - systemd systems * create sysconfig file on systemd systems as well, yet do not require it at run-time (bnc#862600) * symlink rcsshd to /usr/bin/service - rename "-forcepermissions" patch to "-sftp_force_permissions" - disable key converter - ssh-keygen is able to do the same ------------------------------------------------------------------- Tue Feb 11 10:44:05 CET 2014 - hare@suse.de - Do not fail if sysconfig file isn't installed (bnc#862600) ------------------------------------------------------------------- Wed Feb 5 08:38:11 UTC 2014 - idonmez@suse.com - Add openssh-6.2p1-forcepermissions.patch to implement a force permissions mode (fate#312774). The patch is based on http://marc.info/?l=openssh-unix-dev&m=128896838930893 ------------------------------------------------------------------- Fri Jan 24 15:13:09 UTC 2014 - pcerny@suse.com - Update to 6.4p1 Features since 6.2p2: * ssh-agent(1) support in sshd(8); allows encrypted hostkeys, or hostkeys on smartcards. * ssh(1)/sshd(8): allow optional time-based rekeying via a second argument to the existing RekeyLimit option. RekeyLimit is now supported in sshd_config as well as on the client. * sshd(8): standardise logging of information during user authentication. * The presented key/cert and the remote username (if available) is now logged in the authentication success/failure message on the same log line as the local username, remote host/port and protocol in use. Certificates contents and the key fingerprint of the signing CA are logged too. * ssh(1) ability to query what cryptographic algorithms are supported in the binary. * ssh(1): ProxyCommand=- for cases where stdin and stdout already point to the proxy. * ssh(1): allow IdentityFile=none * ssh(1)/sshd(8): -E option to append debugging logs to a specified file instead of stderr or syslog. * sftp(1): support resuming partial downloads with the "reget" command and on the sftp commandline or on the "get" commandline with the "-a" (append) option. * ssh(1): "IgnoreUnknown" configuration option to selectively suppress errors arising from unknown configuration directives. * sshd(8): support for submethods to be appended to required authentication methods listed via AuthenticationMethods. Bugfixes since 6.2p2: * sshd(8): fix refusal to accept certificate if a key of a different type to the CA key appeared in authorized_keys before the CA key. * ssh(1)/ssh-agent(1)/sshd(8): Use a monotonic time source for timers so that things like keepalives and rekeying will work properly over clock steps. * sftp(1): update progressmeter when data is acknowledged, not when it's sent. bz#2108 * ssh(1)/ssh-keygen(1): improve error messages when the current user does not exist in /etc/passwd; bz#2125 * ssh(1): reset the order in which public keys are tried after partial authentication success. * ssh-agent(1): clean up socket files after SIGINT when in debug mode; bz#2120 * ssh(1) and others: avoid confusing error messages in the case of broken system resolver configurations; bz#2122 * ssh(1): set TCP nodelay for connections started with -N; bz#2124 * ssh(1): correct manual for permission requirements on ~/.ssh/config; bz#2078 * ssh(1): fix ControlPersist timeout not triggering in cases where TCP connections have hung. bz#1917 * ssh(1): properly deatch a ControlPersist master from its controlling terminal. * sftp(1): avoid crashes in libedit when it has been compiled with multi- byte character support. bz#1990 * sshd(8): when running sshd -D, close stderr unless we have explicitly requested logging to stderr. bz#1976, * ssh(1): fix incomplete bzero; bz#2100 * sshd(8): log and error and exit if ChrootDirectory is specified and running without root privileges. * Many improvements to the regression test suite. In particular log files are now saved from ssh and sshd after failures. * Fix a number of memory leaks. bz#1967 bz#2096 and others * sshd(8): fix public key authentication when a :style is appended to the requested username. * ssh(1): do not fatally exit when attempting to cleanup multiplexing- created channels that are incompletely opened. bz#2079 * sshd(8): fix a memory corruption problem triggered during rekeying when an AES-GCM cipher is selected * Fix unaligned accesses in umac.c for strict-alignment architectures. bz#2101 * Fix broken incorrect commandline reporting errors. bz#1448 * Only include SHA256 and ECC-based key exchange methods if libcrypto has the required support. * Fix crash in SOCKS5 dynamic forwarding code on strict-alignment architectures. - FIPS and GSSKEX patched disabled for now ------------------------------------------------------------------- Fri Oct 4 17:50:32 UTC 2013 - pcerny@suse.com - fix server crashes when using AES-GCM - removed superfluous build dependency on X ------------------------------------------------------------------- Thu Sep 19 02:02:56 UTC 2013 - pcerny@suse.com - spec file and patch cleanup * key converter is now in the -key-converter.patch * openssh-nodaemon-nopid.patch is -no_fork-no_pid_file.patch * openssh-nocrazyabicheck.patch is -disable-openssl-abi-check.patch * removing obsolete -engines.diff patch - patches from SLE11 * use auditing infrastructure extending upstream hooks (-auditX-*.patch) instead of the single old patch (-audit.patch) * FIPS enablement (currently disabled) (-fingerprint_hash.patch, -fips.patch) * GSSAPI key exchange (bnc#784689, fate#313068, -gssapi_key_exchange.patch) * SysV init script update - 'stop' now terminates all sshd processes and closes all connections, 'soft-stop' only terminates the listener process (keeps active sessions intact) (fate#314243) * helper application for retrieving users' public keys from an LDAP server (bnc#683733, fate#302144, -ldap.patch) - subpackage openssh-akc-ldap * several bugfixes: - login invocation (bnc#833605, -login_options.patch) - disable locked accounts when using PAM (bnc#708678, fate#312033, -pam-check-locks.patch) - fix wtmp handling (bnc#18024, -lastlog.patch) - init script is moved into documentation for openSUSE 12.3+ (as it confused systemd) ------------------------------------------------------------------- Tue Sep 10 21:15:59 UTC 2013 - crrodriguez@opensuse.org - fix the logic in openssh-nodaemon-nopid.patch which is broken and pid_file therefore still being created. ------------------------------------------------------------------- Sat Aug 3 17:57:06 UTC 2013 - crrodriguez@opensuse.org - Update to version 6.2p2 * ssh(1)/sshd(8): Added support for AES-GCM authenticated encryption * ssh(1)/sshd(8): Added support for encrypt-then-mac (EtM) MAC modes * ssh(1)/sshd(8): Added support for the UMAC-128 MAC * sshd(8): Added support for multiple required authentication * sshd(8)/ssh-keygen(1): Added support for Key Revocation Lists * ssh(1): When SSH protocol 2 only is selected (the default), ssh(1) now immediately sends its SSH protocol banner to the server without waiting to receive the server's banner, saving time when connecting. * dozens of other changes, see http://www.openssh.org/txt/release-6.2 ------------------------------------------------------------------- Mon Jul 1 18:54:31 UTC 2013 - coolo@suse.com - avoid the build cycle between curl, krb5, libssh2_org and openssh by using krb5-mini-devel ------------------------------------------------------------------- Wed Jun 19 09:50:25 UTC 2013 - speilicke@suse.com - Recommend xauth, X11-forwarding won't work if it is not installed ------------------------------------------------------------------- Sun Apr 14 19:02:32 UTC 2013 - crrodriguez@opensuse.org - sshd.service: Do not order after syslog.target, it is not required or recommended and that target does not even exist anymore. ------------------------------------------------------------------- Tue Jan 8 10:16:45 UTC 2013 - dmueller@suse.com - use ssh-keygen(1) default keylengths in generating the host key instead of hardcoding it ------------------------------------------------------------------- Tue Nov 13 10:26:37 UTC 2012 - meissner@suse.com - Updated to 6.1p1, a bugfix release Features: * sshd(8): This release turns on pre-auth sandboxing sshd by default for new installs, by setting UsePrivilegeSeparation=sandbox in sshd_config. * ssh-keygen(1): Add options to specify starting line number and number of lines to process when screening moduli candidates, allowing processing of different parts of a candidate moduli file in parallel * sshd(8): The Match directive now supports matching on the local (listen) address and port upon which the incoming connection was received via LocalAddress and LocalPort clauses. * sshd(8): Extend sshd_config Match directive to allow setting AcceptEnv and {Allow,Deny}{Users,Groups} * Add support for RFC6594 SSHFP DNS records for ECDSA key types. bz#1978 * ssh-keygen(1): Allow conversion of RSA1 keys to public PEM and PKCS8 * sshd(8): Allow the sshd_config PermitOpen directive to accept "none" as an argument to refuse all port-forwarding requests. * sshd(8): Support "none" as an argument for AuthorizedPrincipalsFile * ssh-keyscan(1): Look for ECDSA keys by default. bz#1971 * sshd(8): Add "VersionAddendum" to sshd_config to allow server operators to append some arbitrary text to the server SSH protocol banner. Bugfixes: * ssh(1)/sshd(8): Don't spin in accept() in situations of file descriptor exhaustion. Instead back off for a while. * ssh(1)/sshd(8): Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs as they were removed from the specification. bz#2023, * sshd(8): Handle long comments in config files better. bz#2025 * ssh(1): Delay setting tty_flag so RequestTTY options are correctly picked up. bz#1995 * sshd(8): Fix handling of /etc/nologin incorrectly being applied to root on platforms that use login_cap. Portable OpenSSH: * sshd(8): Allow sshd pre-auth sandboxing to fall-back to the rlimit sandbox from the Linux SECCOMP filter sandbox when the latter is not available in the kernel. * ssh(1): Fix NULL dereference when built with LDNS and using DNSSEC to retrieve a CNAME SSHFP record. * Fix cross-compilation problems related to pkg-config. bz#1996 ------------------------------------------------------------------- Tue Nov 13 10:26:16 CET 2012 - kukuk@suse.de - Fix groupadd arguments - Add LSB tag to sshd init script ------------------------------------------------------------------- Fri Oct 26 15:01:21 UTC 2012 - coolo@suse.com - explicit buildrequire groff, needed for man pages ------------------------------------------------------------------- Tue Oct 16 12:29:36 UTC 2012 - coolo@suse.com - buildrequire systemd through pkgconfig to break cycle ------------------------------------------------------------------- Wed Aug 15 19:25:08 UTC 2012 - crrodriguez@opensuse.org - When not daemonizing, such is used with systemd, no not create a PID file ------------------------------------------------------------------- Mon Jun 18 11:34:51 UTC 2012 - coolo@suse.com - do not buildrequire xorg-x11, the askpass is an extra package and should build from a different package ------------------------------------------------------------------- Tue May 29 07:14:36 UTC 2012 - meissner@suse.com - use correct download url and tarball format. ------------------------------------------------------------------- Tue May 29 06:52:13 UTC 2012 - crrodriguez@opensuse.org - Update to version 6.0, large list of changes, seen http://www.openssh.org/txt/release-6.0 for detail. ------------------------------------------------------------------- Thu May 10 20:50:33 UTC 2012 - crrodriguez@opensuse.org - By default openSSH checks at *runtime* if the openssl API version matches with the running library, that might be good if you are compiling SSH yourself but it is a totally insane way to check for binary/source compatibility in a distribution. ------------------------------------------------------------------- Mon Feb 20 08:29:17 UTC 2012 - meissner@suse.com - include X11 app default dir ------------------------------------------------------------------- Fri Dec 23 08:27:08 UTC 2011 - brian@aljex.com - Fix building for OS 11.0, 10.3, 10.2 * Don't require selinux on OS 11.0 or lower ------------------------------------------------------------------- Fri Dec 23 06:34:28 UTC 2011 - brian@aljex.com - Fix building for OS 11.2 and 11.1 - Cleanup remove remaining litteral /etc/init.d 's ------------------------------------------------------------------- Wed Dec 21 10:38:59 UTC 2011 - coolo@suse.com - add autoconf as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Tue Nov 29 19:48:29 UTC 2011 - crrodriguez@opensuse.org - Add systemd startup units ------------------------------------------------------------------- Sat Oct 29 22:41:55 UTC 2011 - pcerny@suse.com - finalising libexecdir change (bnc#726712) ------------------------------------------------------------------- Wed Oct 19 00:32:20 UTC 2011 - pcerny@suse.com - Update to 5.9p1 * sandboxing privsep child through rlimit ------------------------------------------------------------------- Fri Sep 16 09:43:47 UTC 2011 - jengelh@medozas.de - Avoid overriding libexecdir with %_lib (bnc#712025) - Clean up the specfile by request of Minh Ngo, details entail: * remove norootforbuild comments, redundant %clean section * run spec-beautifier over it - Add PIEFLAGS to compilation of askpass; fails otherwise ------------------------------------------------------------------- Mon Aug 29 23:47:58 UTC 2011 - crrodriguez@opensuse.org - Update to verison 5.8p2 * Fixed vuln in systems without dev/random, we arenot affected * Fixes problems building with selinux enabled - Fix build with as-needed and no-add-needed ------------------------------------------------------------------- Sat Aug 13 20:46:17 UTC 2011 - crrodriguez@opensuse.org - Enable libedit/autocompletion support in sftp ------------------------------------------------------------------- Tue May 10 15:08:17 UTC 2011 - meissner@novell.com - Change default keysizes of rsa and dsa from 1024 to 2048 to match ssh-keygen manpage recommendations. ------------------------------------------------------------------- Fri Feb 4 11:19:25 UTC 2011 - lchiquitto@novell.com - Update to 5.8p1 * Fix vulnerability in legacy certificate signing introduced in OpenSSH-5.6 and found by Mateusz Kocielski. * Fix compilation failure when enableing SELinux support. * Do not attempt to call SELinux functions when SELinux is disabled. - Remove patch that is now upstream: * openssh-5.7p1-selinux.diff ------------------------------------------------------------------- Thu Feb 3 16:42:01 UTC 2011 - pcerny@novell.com - specfile/patches cleanup ------------------------------------------------------------------- Mon Jan 24 11:24:59 UTC 2011 - lchiquitto@novell.com - Update to 5.7p1 * Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. * sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. * scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host. * ssh(1): automatically order the hostkeys requested by the client based on which hostkeys are already recorded in known_hosts. * ssh(1)/sshd(8): add a new IPQoS option to specify arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. * sftp(1): the sftp client is now significantly faster at performing directory listings, using OpenBSD glob(3) extensions to preserve the results of stat(3) operations performed in the course of its execution rather than performing expensive round trips to fetch them again afterwards. * ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. * ssh(1)/sshd(8): add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. * sftp(1)/scp(1): factor out bandwidth limiting code from scp(1) into a generic bandwidth limiter that can be attached using the atomicio callback mechanism and use it to add a bandwidth limit option to sftp(1). * Support building against openssl-1.0.0a. * Bug fixes. - Remove patches that are now upstream: * openssh-5.6p1-tmpdir.diff * openssh-linux-new-oomkill.patch - Add upstream patch to fix build with SELinux enabled. ------------------------------------------------------------------- Wed Jan 12 13:37:38 CET 2011 - sbrabec@suse.cz - Removed relics of no more implemented opensc support. ------------------------------------------------------------------- Thu Nov 18 12:20:59 UTC 2010 - lnussel@suse.de - add pam_lastlog to show failed login attempts - remove permissions handling, no special handling needed ------------------------------------------------------------------- Tue Nov 16 14:45:14 UTC 2010 - cristian.rodriguez@opensuse.org - Use upstream oom_adj is deprecated patch ------------------------------------------------------------------- Tue Nov 2 13:25:19 UTC 2010 - coolo@novell.com - remove the code trying to patch X11 paths - which was broken for a very long time and was useless anyway as the Makefiles do this correctly themselves ------------------------------------------------------------------- Sun Oct 31 12:37:02 UTC 2010 - jengelh@medozas.de - Use %_smp_mflags ------------------------------------------------------------------- Thu Oct 14 16:00:19 UTC 2010 - crrodriguez@opensuse.org - Fix warning "oom_adj is deprecated use oom_score_adj instead" ------------------------------------------------------------------- Mon Sep 13 14:47:10 CEST 2010 - anicka@suse.cz - actualize README.SuSE (bnc#638893) ------------------------------------------------------------------- Tue Aug 24 15:43:08 CEST 2010 - anicka@suse.cz - update to 5.6p1 * Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. * Hostbased authentication may now use certificate host keys. * ssh-keygen(1) now supports signing certificate using a CA key that has been stored in a PKCS#11 token. * ssh(1) will now log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts. * Expand %h to the hostname in ssh_config Hostname options. * Allow ssh-keygen(1) to import (-i) and export (-e) of PEM and PKCS#8 keys in addition to RFC4716 (SSH.COM) encodings via a new -m option * sshd(8) will now queue debug messages for bad ownership or permissions on the user's keyfiles encountered during authentication and will send them after authentication has successfully completed. * ssh(1) connection multiplexing now supports remote forwarding with dynamic port allocation and can report the allocated port back to the user * sshd(8) now supports indirection in matching of principal names listed in certificates. * sshd(8) now has a new AuthorizedPrincipalsFile option to specify a file containing a list of names that may be accepted in place of the username when authorizing a certificate trusted via the sshd_config(5) TrustedCAKeys option. * Additional sshd_config(5) options are now valid inside Match blocks * Revised the format of certificate keys. * bugfixes - removed -forward patch (SSH_MAX_FORWARDS_PER_DIRECTION not hard-coded any more), removed memory leak fix (fixed in upstream) ------------------------------------------------------------------- Fri Aug 20 13:00:43 CEST 2010 - anicka@suse.cz - hint user how to remove offending keys (bnc#625552) ------------------------------------------------------------------- Thu Jul 22 17:58:09 CEST 2010 - anicka@suse.cz - update to 5.5p1 ------------------------------------------------------------------- Tue Jul 20 17:19:24 CEST 2010 - anicka@suse.cz - update to 5.5p1 * Allow ChrootDirectory to work in SELinux platforms. * bugfixes ------------------------------------------------------------------- Wed Jun 30 16:01:30 CEST 2010 - meissner@suse.de - Disable visual hostkey support again, after discussion on its usefulness. ------------------------------------------------------------------- Mon May 17 18:11:33 UTC 2010 - cristian.rodriguez@opensuse.org - Hardware crypto is supported and patched but never enabled, need to use --with-ssl-engine explicitely ------------------------------------------------------------------- Fri May 14 16:03:17 CEST 2010 - anicka@suse.cz - fixed memory leak in sftp (bnc#604274) ------------------------------------------------------------------- Fri Apr 23 12:01:50 CEST 2010 - anicka@suse.cz - honour /etc/nologin (bnc#530885) ------------------------------------------------------------------- Thu Mar 25 11:00:00 CET 2010 - meissner@suse.de - Enable VisualHostKey (ascii art of the hostkey fingerprint) and HashHostKeys (hardening measure to make them unusable for worms/malicious users for further host hopping). ------------------------------------------------------------------- Tue Mar 23 18:57:07 CET 2010 - anicka@suse.cz - update to 5.4p1 * After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. * Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is automatically enabled on all platforms that support dlopen(3) and was inspired by patches written by Alon Bar-Lev. Details in the ssh(1) and ssh-add(1) manpages. * Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (not X.509). Certificates contain a public key, identity information and some validity constraints and are signed with a standard SSH public key using ssh-keygen(1). CA keys may be marked as trusted in authorized_keys or via a TrustedUserCAKeys option in sshd_config(5) (for user authentication), or in known_hosts (for host authentication). Documentation for certificate support may be found in ssh-keygen(1), sshd(8) and ssh(1) and a description of the protocol extensions in PROTOCOL.certkeys. * Added a 'netcat mode' to ssh(1): "ssh -W host:port ..." This connects stdio on the client to a single port forward on the server. This allows, for example, using ssh as a ProxyCommand to route connections via intermediate servers. bz#1618 * Add the ability to revoke keys in sshd(8) and ssh(1). User keys may be revoked using a new sshd_config(5) option "RevokedKeys". Host keys are revoked through known_hosts (details in the sshd(8) man page). Revoked keys cannot be used for user or host authentication and will trigger a warning if used. * Rewrite the ssh(1) multiplexing support to support non-blocking operation of the mux master, improve the resilience of the master to malformed messages sent to it by the slave and add support for requesting port- forwardings via the multiplex protocol. The new stdio-to-local forward mode ("ssh -W host:port ...") is also supported. The revised multiplexing protocol is documented in the file PROTOCOL.mux in the source distribution. * Add a 'read-only' mode to sftp-server(8) that disables open in write mode and all other fs-modifying protocol methods. bz#430 * Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has. bz#1229 * Many improvements to the sftp(1) client, many of which were implemented by Carlos Silva through the Google Summer of Code program: - Support the "-h" (human-readable units) flag for ls - Implement tab-completion of commands, local and remote filenames - Support most of scp(1)'s commandline arguments in sftp(1), as a first step towards making sftp(1) a drop-in replacement for scp(1). Note that the rarely-used "-P sftp_server_path" option has been moved to "-D sftp_server_path" to make way for "-P port" to match scp(1). - Add recursive transfer support for get/put and on the commandline * New RSA keys will be generated with a public exponent of RSA_F4 == (2**16)+1 == 65537 instead of the previous value 35. * Passphrase-protected SSH protocol 2 private keys are now protected with AES-128 instead of 3DES. This applied to newly-generated keys as well as keys that are reencrypted (e.g. by changing their passphrase). - cleanup in patches ------------------------------------------------------------------- Tue Mar 2 09:09:18 UTC 2010 - coolo@novell.com - do not use paths at all, but prereq packages ------------------------------------------------------------------- Sat Feb 27 20:35:01 UTC 2010 - aj@suse.de - Use complete path for groupadd and useradd in pre section. ------------------------------------------------------------------- Tue Feb 23 15:45:06 CET 2010 - anicka@suse.cz - audit patch: add fix for bnc#545271 ------------------------------------------------------------------- Mon Feb 22 17:15:22 CET 2010 - anicka@suse.cz - do not fix uid/gid anymore (bnc#536564) ------------------------------------------------------------------- Tue Dec 15 11:04:00 CET 2009 - jengelh@medozas.de - select large PIE for SPARC, it is required to avoid "relocation truncated to fit: R_SPARC_GOT13 against symbol xyz defined in COMMON section in sshd.o" ------------------------------------------------------------------- Mon Sep 21 14:40:51 CEST 2009 - anicka@suse.cz - add new version of homechroot patch (added documentation, added check for nodev and nosuid) - remove Provides and Obsoletes ssh ------------------------------------------------------------------- Thu Aug 20 16:54:08 CEST 2009 - anicka@suse.cz - make sftp in chroot users life easier (ie. bnc#518238), many thanks jchadima@redhat.com for a patch ------------------------------------------------------------------- Sun Jul 12 21:43:21 CEST 2009 - coolo@novell.com - readd $SSHD_BIN so that sshd starts at all ------------------------------------------------------------------- Tue Jul 7 15:06:58 CEST 2009 - llunak@novell.com - Added a hook for ksshaskpass ------------------------------------------------------------------- Sun Jul 5 12:17:40 CEST 2009 - dmueller@novell.com - readd -f to startproc and remove -p instead to ensure that sshd is started even though old instances are still running (e.e. being logged in from remote) ------------------------------------------------------------------- Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com - disable as-needed for this package as it fails to build with it ------------------------------------------------------------------- Tue May 26 11:56:20 CEST 2009 - anicka@suse.cz - disable -f in startproc to calm the warning (bnc#506831) ------------------------------------------------------------------- Thu Apr 23 09:44:07 CEST 2009 - lnussel@suse.de - do not enable sshd by default ------------------------------------------------------------------- Mon Feb 23 17:27:45 CET 2009 - anicka@suse.cz - update to 5.2p1 * This release changes the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". * This release also adds countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack. We believe that these attacks are rendered infeasible by these changes. * Added a -y option to ssh(1) to force logging to syslog rather than stderr, which is useful when running daemonised (ssh -f) * The sshd_config(5) ForceCommand directive now accepts commandline arguments for the internal-sftp server. * The ssh(1) ~C escape commandline now support runtime creation of dynamic (-D) port forwards. * Support the SOCKS4A protocol in ssh(1) dynamic (-D) forwards. (bz#1482) * Support remote port forwarding with a listen port of '0'. This informs the server that it should dynamically allocate a listen port and report it back to the client. (bz#1003) * sshd(8) now supports setting PermitEmptyPasswords and AllowAgentForwarding in Match blocks * Repair a ssh(1) crash introduced in openssh-5.1 when the client is sent a zero-length banner (bz#1496) * Due to interoperability problems with certain broken SSH implementations, the eow@openssh.com and no-more-sessions@openssh.com protocol extensions are now only sent to peers that identify themselves as OpenSSH. * Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. * Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1). * Avoid double-free in ssh(1) ~C escape -L handler (bz#1539) * Correct fail-on-error behaviour in sftp(1) batchmode for remote stat operations. (bz#1541) * Disable nonfunctional ssh(1) ~C escape handler in multiplex slave connections. (bz#1543) * Avoid hang in ssh(1) when attempting to connect to a server that has MaxSessions=0 set. * Multiple fixes to sshd(8) configuration test (-T) mode * Several core and portable OpenSSH bugs fixed: 1380, 1412, 1418, 1419, 1421, 1490, 1491, 1492, 1514, 1515, 1518, 1520, 1538, 1540 * Many manual page improvements. ------------------------------------------------------------------- Mon Dec 1 15:43:14 CET 2008 - anicka@suse.cz - respect SSH_MAX_FORWARDS_PER_DIRECTION (bnc#448775) ------------------------------------------------------------------- Mon Nov 10 16:01:27 CET 2008 - anicka@suse.cz - fix printing banner (bnc#443380) ------------------------------------------------------------------- Fri Oct 24 16:24:34 CEST 2008 - anicka@suse.cz - call pam functions in the right order (bnc#438292) - mention default forwarding of locale settings in README.SuSE (bnc#434799) ------------------------------------------------------------------- Tue Sep 9 17:55:29 CEST 2008 - anicka@suse.cz - remove pam_resmgr from sshd.pamd (bnc#422619) ------------------------------------------------------------------- Sun Aug 24 08:26:05 CEST 2008 - coolo@suse.de - fix fillup macro usage ------------------------------------------------------------------- Fri Aug 22 11:51:12 CEST 2008 - prusnak@suse.cz - enabled SELinux support [Fate#303662] ------------------------------------------------------------------- Tue Jul 22 20:39:29 CEST 2008 - anicka@suse.cz - update to 5.1p1 * sshd(8): Avoid X11 man-in-the-middle attack on HP/UX (and possibly other platforms) when X11UseLocalhost=no * Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprinnt display is controlled by a new ssh_config(5) option "VisualHostKey". * sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. * sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. * Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. * ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). * sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. * sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server) * Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). * Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. * ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. * ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". * Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. * ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup * ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. (bz#383) * ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as: "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. (bz#85) * sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. * When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. (bz#92) * "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests" (bz#1315) * sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. (bz#1310) * The MaxAuthTries option is now permitted in sshd_config(5) match blocks. * Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. (bz#1331) * ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases. (bz#1439 bz#1329) * Added some basic interoperability tests against Twisted Conch. * Documented OpenSSH's extensions to and deviations from the published SSH protocols (the PROTOCOL file in the distribution) * Documented OpenSSH's ssh-agent protocol (PROTOCOL.agent). * bugfixes - remove gssapi_krb5-fix patch ------------------------------------------------------------------- Fri Apr 18 17:53:30 CEST 2008 - werner@suse.de - Handle pts slave lines like utemper ------------------------------------------------------------------- Wed Apr 9 14:37:57 CEST 2008 - anicka@suse.cz - update to 5.0p1 * CVE-2008-1483: Avoid possible hijacking of X11-forwarded connections by refusing to listen on a port unless all address families bind successfully. - remove CVE-2008-1483 patch ------------------------------------------------------------------- Wed Apr 2 14:57:26 CEST 2008 - anicka@suse.cz - update to 4.9p1 * Disable execution of ~/.ssh/rc for sessions where a command has been forced by the sshd_config ForceCommand directive. Users who had write access to this file could use it to execute abritrary commands. This behaviour was documented, but was an unsafe default and an extra hassle for administrators. * Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory". Please refer to sshd_config(5) for details, and please use this feature carefully. (bz#177 bz#1352) * Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. Please refer to sshd_config(5) for more information. * Added a "no-user-rc" option for authorized_keys to disable execution of ~/.ssh/rc * Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations. (bz#1400) * Removed the fixed limit of 100 file handles in sftp-server(8). The server will now dynamically allocate handles up to the number of available file descriptors. (bz#1397) * ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1 (bz#440) * Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. * Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. (bz#778) * Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). * ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. * ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. * Many new regression tests, including interop tests against PuTTY's plink. * Support BSM auditing on Mac OS X * bugfixes - remove addrlist, pam_session_close, strict-aliasing-fix patches (not needed anymore) ------------------------------------------------------------------- Tue Mar 25 11:10:14 CET 2008 - anicka@suse.cz - fix CVE-2008-1483 (bnc#373527) ------------------------------------------------------------------- Fri Jan 4 11:11:52 CET 2008 - anicka@suse.cz - fix privileges of a firewall definition file [#351193] ------------------------------------------------------------------- Sat Dec 15 00:10:13 CET 2007 - anicka@suse.cz - add patch calling pam with root privileges [#334559] - drop pwname-home patch [#104773] ------------------------------------------------------------------- Fri Dec 7 22:28:40 CET 2007 - anicka@suse.cz - fix race condition in xauth patch ------------------------------------------------------------------- Wed Dec 5 10:45:36 CET 2007 - anicka@suse.cz - update to 4.7p1 * Add "-K" flag for ssh to set GSSAPIAuthentication=yes and GSSAPIDelegateCredentials=yes. This is symmetric with -k * make scp try to skip FIFOs rather than blocking when nothing is listening. * increase default channel windows * put the MAC list into a display * many bugfixes ------------------------------------------------------------------- Mon Oct 8 16:34:06 CEST 2007 - anicka@suse.cz - block SIGALRM only during calling syslog() [#331032] ------------------------------------------------------------------- Thu Sep 13 15:50:39 CEST 2007 - nadvornik@suse.cz - fixed checking of an untrusted cookie, CVE-2007-4752 [#308521] ------------------------------------------------------------------- Tue Aug 28 18:25:57 CEST 2007 - anicka@suse.cz - fix blocksigalrm patch to set old signal mask after writing the log in every case [#304819] ------------------------------------------------------------------- Tue Aug 21 04:51:45 CEST 2007 - anicka@suse.cz - avoid generating ssh keys when a non-standard location is configured [#281228] ------------------------------------------------------------------- Wed Jul 25 16:18:50 CEST 2007 - anicka@suse.cz - fixed typo in sshd.fw [#293764] ------------------------------------------------------------------- Mon Mar 19 19:14:26 CET 2007 - nadvornik@suse.cz - fixed default for ChallengeResponseAuthentication [#255374] ------------------------------------------------------------------- Mon Mar 12 10:56:31 CET 2007 - anicka@suse.cz - update to 4.6p1 * sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. * Allow multiple forwarding options to work when specified in a PermitOpen directive * Clear SIGALRM when restarting due to SIGHUP. Prevents stray signal from taking down sshd if a connection was pending at the time SIGHUP was received * hang on exit" when background processes are running at the time of exit on a ttyful/login session * some more bugfixes ------------------------------------------------------------------- Mon Mar 5 11:03:41 CET 2007 - anicka@suse.cz - fix path for firewall definition ------------------------------------------------------------------- Thu Mar 1 15:14:23 CET 2007 - anicka@suse.cz - add support for Linux audit (FATE #120269) ------------------------------------------------------------------- Wed Feb 21 11:21:48 CET 2007 - anicka@suse.cz - add firewall definition [#246921], FATE #300687, source: sshd.fw ------------------------------------------------------------------- Sat Jan 6 12:30:16 CET 2007 - anicka@suse.cz - disable SSHv1 protocol in default configuration [#231808] ------------------------------------------------------------------- Tue Dec 12 14:41:45 CET 2006 - anicka@suse.cz - update to 4.5p1 * Use privsep_pw if we have it, but only require it if we absolutely need it. * Correctly check for bad signatures in the monitor, otherwise the monitor and the unpriv process can get out of sync. * Clear errno before calling the strtol functions. * exit instead of doing a blocking tcp send if we detect a client/server timeout, since the tcp sendqueue might be already full (of alive requests) * include signal.h, errno.h, sys/in.h * some more bugfixes ------------------------------------------------------------------- Wed Nov 22 13:42:32 CET 2006 - anicka@suse.cz - fixed README.SuSE [#223025] ------------------------------------------------------------------- Thu Nov 9 13:59:35 CET 2006 - anicka@suse.cz - backport security fixes from openssh 4.5 (#219115) ------------------------------------------------------------------- Tue Nov 7 13:43:44 CET 2006 - ro@suse.de - fix manpage permissions ------------------------------------------------------------------- Tue Oct 31 14:04:52 CET 2006 - anicka@suse.cz - fix gssapi_krb5-fix patch [#215615] - fix xauth patch ------------------------------------------------------------------- Tue Oct 10 16:07:11 CEST 2006 - postadal@suse.cz - fixed building openssh from src.rpm [#176528] (gssapi_krb5-fix.patch) ------------------------------------------------------------------- Tue Oct 3 14:44:08 CEST 2006 - postadal@suse.cz - updated to version 4.4p1 [#208662] * fixed pre-authentication DoS, that would cause sshd(8) to spin until the login grace time expired * fixed unsafe signal hander, which was vulnerable to a race condition that could be exploited to perform a pre-authentication DoS * fixed a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms * implemented conditional configuration in sshd_config(5) using the "Match" directive * added support for Diffie-Hellman group exchange key agreement with a final hash of SHA256 * added a "ForceCommand", "PermitOpen" directive to sshd_config(5) * added optional logging of transactions to sftp-server(8) * ssh(1) will now record port numbers for hosts stored in ~/.ssh/authorized_keys when a non-standard port has been requested * added an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established * extended sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments - removed obsoleted patches: autoconf-fix.patch, dos-fix.patch - fixed gcc issues (gcc-fix.patch) ------------------------------------------------------------------- Wed Sep 20 17:34:54 CEST 2006 - postadal@suse.cz - fixed DoS by CRC compensation attack detector [#206917] (dos-fix.patch) - fixed client NULL deref on protocol error - cosmetic fix in init script [#203826] ------------------------------------------------------------------- Fri Sep 1 14:14:52 CEST 2006 - kukuk@suse.de - sshd.pamd: Add pam_loginuid, move pam_nologin to a better position ------------------------------------------------------------------- Fri Aug 25 15:37:46 CEST 2006 - postadal@suse.cz - fixed path for xauth [#198676] ------------------------------------------------------------------- Thu Aug 3 15:07:41 CEST 2006 - postadal@suse.cz - fixed build with X11R7 ------------------------------------------------------------------- Thu Jul 20 17:25:27 CEST 2006 - postadal@suse.cz - updated to version 4.3p2 * experimental support for tunneling network packets via tun(4) - removed obsoleted patches: pam-error.patch, CVE-2006-0225.patch, scp.patch, sigalarm.patch ------------------------------------------------------------------- Mon Feb 13 12:54:28 CET 2006 - postadal@suse.cz - upstream fixes - fixed "scp a b c", when c is not directory (scp.patch) - eliminate some code duplicated in privsep and non-privsep paths, and explicitly clear SIGALRM handler (sigalarm.patch) ------------------------------------------------------------------- Fri Feb 3 19:02:49 CET 2006 - postadal@suse.cz - fixed local arbitrary command execution vulnerability [#143435] (CVE-2006-0225.patch) ------------------------------------------------------------------- Thu Feb 2 13:19:41 CET 2006 - postadal@suse.cz - fixed xauth.diff for disabled UsePrivilegeSeparation mode [#145809] - build on s390 without Smart card support (opensc) [#147383] ------------------------------------------------------------------- Mon Jan 30 16:25:01 CET 2006 - postadal@suse.cz - fixed patch xauth.diff [#145809] - fixed comments [#142989] ------------------------------------------------------------------- Wed Jan 25 21:39:06 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Mon Jan 16 18:05:44 CET 2006 - meissner@suse.de - added -fstack-protector. ------------------------------------------------------------------- Tue Jan 3 15:46:33 CET 2006 - postadal@suse.cz - updated to version 4.2p1 - removed obsoleted patches: upstream_fixes.diff, gssapi-secfix.patch ------------------------------------------------------------------- Tue Nov 15 17:51:07 CET 2005 - postadal@suse.cz - do not delegate GSSAPI credentials to log in with a different method than GSSAPI [#128928] (CAN-2005-2798, gssapi-secfix.patch) ------------------------------------------------------------------- Sun Oct 23 10:40:24 CEST 2005 - postadal@suse.cz - fixed PAM to send authentication failing mesaage to client [#130043] (pam-error.patch) ------------------------------------------------------------------- Wed Sep 14 16:58:14 CEST 2005 - postadal@suse.cz - fixed uninitialized variable in patch xauth.diff [#98815] ------------------------------------------------------------------- Thu Sep 8 15:56:37 CEST 2005 - postadal@suse.cz - don't strip ------------------------------------------------------------------- Mon Sep 5 20:04:04 CEST 2005 - postadal@suse.cz - added patch xauth.diff prevent from polluting xauthority file [#98815] ------------------------------------------------------------------- Mon Aug 22 18:12:20 CEST 2005 - postadal@suse.cz - fixed problem when multiple accounts have same UID [#104773] (pwname-home.diff) - added fixes from upstream (upstream_fixes.diff) ------------------------------------------------------------------- Thu Aug 18 17:50:46 CEST 2005 - postadal@suse.cz - added patch tmpdir.diff for using $TMPDIR by ssh-agent [#95731] ------------------------------------------------------------------- Thu Aug 4 11:29:38 CEST 2005 - uli@suse.de - parallelize build ------------------------------------------------------------------- Mon Aug 1 17:48:02 CEST 2005 - postadal@suse.cz - added patch resolving problems with hostname changes [#98627] (xauthlocalhostname.diff) ------------------------------------------------------------------- Wed Jun 22 18:42:57 CEST 2005 - kukuk@suse.de - Compile/link with -fpie/-pie ------------------------------------------------------------------- Wed Jun 15 17:41:24 CEST 2005 - meissner@suse.de - build x11-ask-pass with RPM_OPT_FLAGS. ------------------------------------------------------------------- Fri Jun 10 16:18:25 CEST 2005 - postadal@suse.cz - updated to version 4.1p1 - removed obsoleted patches: restore_terminal, pam-returnfromsession, timing-attacks-fix, krb5ccname, gssapi-pam, logdenysource, sendenv-fix, documentation-fix ------------------------------------------------------------------- Thu Mar 10 10:36:42 CET 2005 - postadal@suse.cz - fixed SendEnv config parsing bug - documented timeout on untrusted x11 forwarding sessions (openssh#849) - mentioned ForwardX11Trusted in ssh.1 (openssh#987) ------------------------------------------------------------------- Thu Mar 3 13:29:13 CET 2005 - postadal@suse.cz - enabled accepting and sending locale environment variables in protocol 2 [#65747, #50091] ------------------------------------------------------------------- Thu Feb 24 16:33:54 CET 2005 - postadal@suse.cz - added patches from cvs: gssapi-pam (openssh#918), krb5ccname (openssh#445), logdenysource (openssh#909) ------------------------------------------------------------------- Thu Feb 3 13:29:23 CET 2005 - postadal@suse.cz - fixed keyboard-interactive/pam/Kerberos leaks info about user existence [#48329] (openssh#971, CAN-2003-0190) ------------------------------------------------------------------- Wed Jan 19 15:58:07 CET 2005 - postadal@suse.cz - splited spec file to decreas number of build dependencies - fixed restoring terminal setting after Ctrl+C during password prompt in scp/sftp [#43309] - allowed users to see output from failing PAM session modules (openssh #890, pam-returnfromsession.patch) ------------------------------------------------------------------- Mon Nov 8 17:17:45 CET 2004 - kukuk@suse.de - Use common-* PAM config files for sshd PAM configuration ------------------------------------------------------------------- Mon Oct 25 15:14:49 CEST 2004 - postadal@suse.cz - switched heimdal-* to kerberos-devel-packages in #needforbuild ------------------------------------------------------------------- Fri Sep 3 15:03:01 CEST 2004 - ro@suse.de - fix lib64 issue ------------------------------------------------------------------- Tue Aug 31 16:03:54 CEST 2004 - postadal@suse.cz - updated to version 3.9p1 - removed obsoleted patches: scp-fix.diff and window_change-fix.diff ------------------------------------------------------------------- Thu Aug 26 15:40:53 CEST 2004 - postadal@suse.cz - added openssh-askpass-gnome subpackage - added ssh-askpass script for choosing askpass depending on windowmanager (by Robert Love <rml@novell.com>) - build with Smart card support (opensc) [#44289] ------------------------------------------------------------------- Tue Aug 17 15:52:20 CEST 2004 - postadal@suse.cz - removed old implementation of "Update Messages" [#36059] ------------------------------------------------------------------- Thu Aug 12 16:36:53 CEST 2004 - postadal@suse.cz - updated to version 3.8p1 - removed obsoleted patches: sftp-progress-fix and pam-fix4 ------------------------------------------------------------------- Mon Jun 28 16:56:23 CEST 2004 - meissner@suse.de - block sigalarm during syslog output or we might deadlock on recursively entering syslog(). (LTC#9523, SUSE#42354) ------------------------------------------------------------------- Wed May 26 15:27:32 CEST 2004 - postadal@suse.cz - fixed commented default value for GSSAPI ------------------------------------------------------------------- Thu May 20 21:23:27 CEST 2004 - mludvig@suse.cz - Load drivers for available hardware crypto accelerators. ------------------------------------------------------------------- Fri Apr 30 15:03:39 CEST 2004 - postadal@suse.cz - updated README.kerberos (GSSAPICleanupCreds renamed to GSSAPICleanupCredentials) ------------------------------------------------------------------- Mon Apr 19 14:41:01 CEST 2004 - postadal@suse.cz - updated README.SuSE (GSSAPICleanupCreds renamed to GSSAPICleanupCredentials) [#39010] ------------------------------------------------------------------- Fri Mar 26 17:24:45 CET 2004 - postadal@suse.cz - fixed sshd(8) and sshd_config(5) man pages (EAL3) - fixed spelling errors in README.SuSE [#37086] ------------------------------------------------------------------- Thu Mar 25 14:50:50 CET 2004 - postadal@suse.cz - fixed change window request [#33177] ------------------------------------------------------------------- Mon Mar 22 15:19:15 CET 2004 - postadal@suse.cz - updated README.SuSE - removed %verify from /usr/bin/ssh in specfile ------------------------------------------------------------------- Thu Mar 18 15:48:52 CET 2004 - postadal@suse.cz - fixed previous fix of security bug in scp [#35443] (CAN-2004-0175) (was too restrictive) - fixed permission of /usr/bin/ssh ------------------------------------------------------------------- Mon Mar 15 17:56:06 CET 2004 - postadal@suse.cz - fixed comments in sshd_config and ssh_config ------------------------------------------------------------------- Mon Mar 15 17:25:08 CET 2004 - postadal@suse.cz - enabled privilege separation mode (new version fixes a lot of problematic PAM calling [#30328]) - fixed security bug in scp [#35443] (CAN-2004-0175) - reverted to old behaviour of ForwardingX11 [#35836] (set ForwardX11Trusted to 'yes' by default) - updated README.SuSE - fixed pam code (pam-fix4.diff, backported from openssh-SNAP-20040311) ------------------------------------------------------------------- Fri Mar 05 13:10:55 CET 2004 - postadal@suse.cz - updated README.SuSE (Remote x11 clients are now untrusted by default) [#35368] - added gssapimitm patch (support for old GSSAPI) ------------------------------------------------------------------- Mon Mar 01 18:13:37 CET 2004 - postadal@suse.cz - updated to version 3.8p1 * The "gssapi" support has been replaced with the "gssapi-with-mic" to fix possible MITM attacks. These two versions are not compatible. - removed obsoleted patches: krb5.patch, dns-lookups.patch, pam-fix.diff, pam-end-fix.diff - used process forking instead pthreads (developers fixed bugs in pam calling and they recommended to don't use threads) ------------------------------------------------------------------- Tue Feb 24 11:37:17 CET 2004 - postadal@suse.cz - fixed the problem with save_argv in sshd.c re-apeared again in version 3.7.1p2 (it caused bad behaviour after receiving SIGHUP - used by reload of init script) [#34845] ------------------------------------------------------------------- Wed Feb 18 18:06:20 CET 2004 - kukuk@suse.de - Real strict-aliasing patch ------------------------------------------------------------------- Wed Feb 18 16:04:17 CET 2004 - postadal@suse.cz - fixed strict-aliasing patch [#34551] ------------------------------------------------------------------- Sat Feb 14 00:20:09 CET 2004 - adrian@suse.de - provide SLP registration file /etc/slp.reg.d/ssh.reg ------------------------------------------------------------------- Tue Feb 03 15:18:36 CET 2004 - postadal@suse.cz - used patch from pam-end-fix.diff [#33132] - fixed instalation openssh without documentation [#33937] - fixed auth-pam.c which breaks strict aliasing ------------------------------------------------------------------- Mon Jan 19 13:19:32 CET 2004 - meissner@suse.de - Added a ; to ssh-key-converter.c to fix gcc 3.4 build. ------------------------------------------------------------------- Fri Jan 16 12:57:41 CET 2004 - kukuk@suse.de - Add pam-devel to neededforbuild ------------------------------------------------------------------- Thu Nov 06 10:14:31 CET 2003 - postadal@suse.cz - added /usr/bin/slogin explicitly to %file list [#32921] ------------------------------------------------------------------- Sun Nov 2 21:10:35 CET 2003 - adrian@suse.de - add %run_permissions to fix build ------------------------------------------------------------------- Tue Oct 14 12:23:36 CEST 2003 - postadal@suse.cz - reverted value UsePAM to "yes" and set PasswordAuthentication to "no" in file /etc/ssh/sshd_config (the version 3.7.1p2 disabled PAM support by default) [#31749] ------------------------------------------------------------------- Tue Sep 23 15:02:00 CEST 2003 - draht@suse.de - New version 3.7.1p2; signature from 86FF9C48 Damien Miller verified for source tarball. Bugs fixed with this version: #31637 (CAN-2003-0786, CAN-2003-0786). Briefly: 1) SSH1 PAM challenge response auth ignored the result of the authentication (with privsep off) 2) The PAM conversation function trashed the stack, by referring to the **resp parameter as an array of pointers rather than as a pointer to an array of struct pam_responses. At least security bug 1) is exploitable. ------------------------------------------------------------------- Fri Sep 19 19:56:01 CEST 2003 - postadal@suse.cz - use pthreads instead process forking (it needs by pam modules) - fixed bug in calling pam_setcred [#31025] (pam-fix.diff - string "FILE:" added to begin of KRB5CCNAME) - updated README.SuSE - reverted ChallengeResponseAuthentication option to default value yes (necessary for pam authentication) [#31432] ------------------------------------------------------------------- Thu Sep 18 18:34:33 CEST 2003 - postadal@suse.cz - updated to version 3.7.1p1 (with security patches) - removed obsoleted patches: chauthtok.patch, krb-include-fix.diff, gssapi-fix.diff, saveargv-fix.diff, gssapi-20030430.diff, racecondition-fix - updated README.kerberos ------------------------------------------------------------------- Tue Sep 16 16:57:02 CEST 2003 - postadal@suse.cz - fixed race condition in allocating memory [#31025] (CAN-2003-0693) ------------------------------------------------------------------- Mon Sep 15 11:52:20 CEST 2003 - postadal@suse.cz - disabled privilege separation, which caused some problems [#30328] (updated README.SuSE) ------------------------------------------------------------------- Thu Sep 04 11:59:39 CEST 2003 - postadal@suse.cz - fixed bug in x11-ssh-askpass dialog [#25846] (askpass-fix.diff is workaround for gcc bug) ------------------------------------------------------------------- Fri Aug 29 11:39:40 CEST 2003 - kukuk@suse.de - Call useradd -r for system account [Bug #29611] ------------------------------------------------------------------- Mon Aug 25 10:40:37 CEST 2003 - postadal@suse.cz - use new stop_on_removal/restart_on_upate macros - fixed lib64 problem in /etc/ssh/sshd_config [#28766] ------------------------------------------------------------------- Tue Aug 19 11:21:33 CEST 2003 - mmj@suse.de - Add sysconfig metadata [#28943] ------------------------------------------------------------------- Fri Aug 1 01:57:08 CEST 2003 - ro@suse.de - add e2fsprogs-devel to neededforbuild ------------------------------------------------------------------- Thu Jul 24 19:47:14 CEST 2003 - postadal@suse.cz - updated to version 3.6.1p2 - added the new version of patch for GSSAPI (gssapi-20030430.diff), the older one was removed (gssapi.patch) - added README.kerberos to filelist ------------------------------------------------------------------- Tue Jun 3 00:41:08 CEST 2003 - mmj@suse.de - Remove files we don't package ------------------------------------------------------------------- Wed Apr 02 15:03:44 CEST 2003 - postadal@suse.cz - fixed bad behaviour after receiving SIGHUP (this bug caused not working reload of init script) ------------------------------------------------------------------- Tue Mar 18 14:25:08 CET 2003 - postadal@suse.cz - added $remote_fs to init.d script (needed if /usr is on remote fs [#25577]) ------------------------------------------------------------------- Thu Mar 13 17:02:52 CET 2003 - postadal@suse.cz - fixed segfault while using GSSAPI for authentication when connecting to localhost (took care about error value of ssh_gssapi_import_name() in function ssh_gssapi_client_ctx()) ------------------------------------------------------------------- Mon Mar 10 09:28:31 CET 2003 - kukuk@suse.de - Remove extra "/" from pid file path. ------------------------------------------------------------------- Mon Mar 03 16:49:24 CET 2003 - postadal@suse.cz - modified init.d script (now checking sshd.init.pid instead of port 22) [#24263] ------------------------------------------------------------------- Mon Mar 3 16:05:24 CET 2003 - okir@suse.de - added comment to /etc/pam.d/ssh on how to enable support for resmgr (#24363). ------------------------------------------------------------------- Fri Feb 21 18:52:05 CET 2003 - postadal@suse.cz - added ssh-copy-id shell script [#23745] ------------------------------------------------------------------- Fri Feb 14 13:42:14 CET 2003 - postadal@suse.cz - given back gssapi and dns-lookups patches ------------------------------------------------------------------- Wed Jan 22 23:05:35 CET 2003 - postadal@suse.cz - updated to version 3.5p1 - removed obsolete patches: owl-mm, forced-commands-only, krb - added patch krb5 (for heimdal) - temporarily removed gssapi patch and dns-lookups (needs rewriting) - fix sysconfig metadata ------------------------------------------------------------------- Thu Dec 5 10:52:41 CET 2002 - okir@suse.de - avoid Kerberos DNS lookups in the default config (#20395) - added README.kerberos ------------------------------------------------------------------- Thu Sep 19 11:00:46 CEST 2002 - postadal@suse.cz - added info about changes in the new version of openssh to README.SuSE [#19757] ------------------------------------------------------------------- Mon Sep 2 10:39:24 CEST 2002 - okir@suse.de - privsep directory now /var/lib/empty, which is provided by filesystem package (#17556) ------------------------------------------------------------------- Wed Aug 28 05:48:16 CEST 2002 - nashif@suse.de - Added insserv & co to PreReq ------------------------------------------------------------------- Mon Aug 26 11:57:20 CEST 2002 - okir@suse.de - applied patch that adds GSSAPI support in protocol version 2 (#18239) ------------------------------------------------------------------- Thu Aug 22 14:09:43 CEST 2002 - postadal@suse.cz - added the patch to fix malfunction of PermitRootLogin seted to forced-commands-only [#17149] ------------------------------------------------------------------- Fri Aug 9 14:41:30 CEST 2002 - okir@suse.de - syslog now reports kerberos auth method when logging in via kerberos (#17469) ------------------------------------------------------------------- Tue Jul 23 04:34:10 PDT 2002 - okir@suse.de - enabled kerberos support - added patch to support kerberos 5 authentication in privsep mode. - added missing section 5 manpages - added missing ssh-keysign to files list (new for privsep) ------------------------------------------------------------------- Mon Jul 22 14:16:54 CEST 2002 - okir@suse.de - fixed handling of expired passwords in privsep mode ------------------------------------------------------------------- Tue Jul 9 13:48:52 CEST 2002 - mmj@suse.de - Don't source rc.config ------------------------------------------------------------------- Wed Jul 3 01:01:24 CEST 2002 - draht@suse.de - ssh-keygen must be told to explicitly create type rsa1 keys in the start script. ------------------------------------------------------------------- Tue Jul 2 12:03:58 CEST 2002 - ro@suse.de - useradd/groupadd in preinstall to standardize ------------------------------------------------------------------- Sat Jun 29 10:33:18 CEST 2002 - ro@suse.de - updated patch from solar: zero out bytes for no longer used pages in mmap-fallback solution ------------------------------------------------------------------- Thu Jun 27 18:07:37 CEST 2002 - ro@suse.de - updated owl-fallback.diff from solar ------------------------------------------------------------------- Thu Jun 27 17:04:16 CEST 2002 - ro@suse.de - update to 3.4p1 o privilege separation support o overflow fix from ISS - unsplit openssh-server and openssh-client ------------------------------------------------------------------- Tue Jun 18 12:12:41 CEST 2002 - mmj@suse.de - Update to 3.2.3p1 which fixed following compared to 3.2.2p1 o a defect in the BSD_AUTH access control handling for o login/tty problems on Solaris (bug #245) o build problems on Cygwin systems - Split the package to openssh, openssh-server, openssh-client and openssh-askpass ------------------------------------------------------------------- Sun May 19 16:15:03 CEST 2002 - mmj@suse.de - Updated to 3.2.2p which includes security and several bugfixes. ------------------------------------------------------------------- Fri Mar 15 12:05:21 CET 2002 - ro@suse.de - added "Obsoletes: ssh" ------------------------------------------------------------------- Tue Mar 5 17:15:30 MET 2002 - draht@suse.de - security fix for bug in channels.c (channelbug.dif) ------------------------------------------------------------------- Fri Mar 1 15:40:59 CET 2002 - bk@suse.de - fix ssh-agent example to use eval `ssh-agent -s` and a typo. - add sentence on use of ssh-agent with startx ------------------------------------------------------------------- Tue Feb 26 12:31:21 CET 2002 - bk@suse.de - update README.SuSE to improve documentation on protocol version ------------------------------------------------------------------- Wed Feb 13 13:15:41 CET 2002 - cihlar@suse.cz - rewritten addrlist patch - "0.0.0.0" is removed from list after "::" is successful [#8951] ------------------------------------------------------------------- Mon Feb 11 15:17:32 CET 2002 - cihlar@suse.cz - added info about the change of the default protocol version to README.SuSE ------------------------------------------------------------------- Thu Feb 7 12:42:53 CET 2002 - cihlar@suse.cz - removed addrlist patch which fixed bug [#8951] as it breaks functionality on machines with kernel without IPv6 support, bug reopened, new solution will be find - switched to default protocol version 2 - added ssh-keyconvert (thanks Olaf Kirch <okir@suse.de>) - removed static linking against libcrypto, as crypt() was removed from it [#5333] ------------------------------------------------------------------- Tue Jan 22 15:43:33 CET 2002 - kukuk@suse.de - Add pam_nologin to account management (else it will not be called if user does not do password authentification) ------------------------------------------------------------------- Tue Jan 15 15:49:07 CET 2002 - egmont@suselinux.hu - removed colon from shutdown message ------------------------------------------------------------------- Thu Jan 10 09:27:50 CET 2002 - cihlar@suse.cz - use %{_lib} ------------------------------------------------------------------- Thu Dec 13 01:01:36 CET 2001 - ro@suse.de - moved rc.config.d -> sysconfig ------------------------------------------------------------------- Mon Dec 10 14:07:21 CET 2001 - cihlar@suse.cz - removed START_SSHD ------------------------------------------------------------------- Fri Dec 7 11:26:22 CET 2001 - cihlar@suse.cz - update to version 3.0.2p1: * CheckMail option in sshd_config is deprecated * X11 cookies are now stored in $HOME * fixed a vulnerability in the UseLogin option * /etc/ssh_known_hosts2 and ~/.ssh/known_hosts2 are obsolete, /etc/ssh_known_hosts and ~/.ssh/known_hosts can be used * several minor fixes - update x11-ssh-askpass to version 1.2.4.1: * fixed Imakefile.in - fixed bug in adresses "::" and "0.0.0.0" [#8951] ------------------------------------------------------------------- Fri Oct 5 07:34:11 CEST 2001 - cihlar@suse.cz - update to version 2.9.9p2 - removed obsolete clientloop and command patches - uncommented "HostKey /etc/ssh/ssh_host_rsa_key" in sshd_config - added German translation of e-mail to sysadmin - init script fixed to work when more listening sshd runs - added /bin/netstat to requires ------------------------------------------------------------------- Mon Sep 24 14:25:58 CEST 2001 - cihlar@suse.cz - fixed security problem with sftp & bypassing keypair auth restrictions - patch based on CVS - fixed status part of init script - it returned running even if there were only sshd of connections and no listening sshd [#11220] - fixed stop part of init script - when there was no /var/run/sshd.pid, all sshd were killed ------------------------------------------------------------------- Thu Sep 6 14:31:15 CEST 2001 - nadvornik@suse.cz - added patch for correct buffer flushing from CVS [bug #6450] ------------------------------------------------------------------- Fri Jul 27 09:05:24 CEST 2001 - cihlar@suse.cz - update x11-ssh-askpass to version 1.2.2 ------------------------------------------------------------------- Thu Jul 26 10:55:16 CEST 2001 - cihlar@suse.cz - update to version 2.9p2 - removed obsolete "cookies" patch ------------------------------------------------------------------- Mon Jun 11 11:21:22 CEST 2001 - cihlar@suse.cz - fixed to compile with new xmkmf ------------------------------------------------------------------- Thu Jun 7 09:42:23 CEST 2001 - cihlar@suse.cz - fixed security bug when any file "cookies" could be removed by anybody ------------------------------------------------------------------- Tue Jun 5 12:49:50 CEST 2001 - bjacke@suse.de - generate rsa host key in init script ------------------------------------------------------------------- Tue Jun 5 07:59:41 CEST 2001 - cihlar@suse.cz - removed complete path from PAM modules ------------------------------------------------------------------- Thu May 3 09:36:17 CEST 2001 - cihlar@suse.cz - update to version 2.9p1 - removed obsolete --with-openssl - removed obsolete man patch ------------------------------------------------------------------- Mon Apr 30 07:50:23 CEST 2001 - cihlar@suse.cz - enable PAM support ------------------------------------------------------------------- Fri Apr 13 11:50:26 CEST 2001 - ro@suse.de - fixed specfile for extra README.SuSE ------------------------------------------------------------------- Fri Apr 13 08:03:45 CEST 2001 - cihlar@suse.cz - fixed init script by new skeleton ------------------------------------------------------------------- Thu Mar 22 14:56:50 CET 2001 - cihlar@suse.cz - update to version 2.5.2p2 ------------------------------------------------------------------- Wed Mar 14 14:12:38 CET 2001 - cihlar@suse.cz - fixed ssh man page ------------------------------------------------------------------- Mon Mar 12 07:56:37 CET 2001 - cihlar@suse.cz - update to version 2.5.1p2 - added xf86 to neededforbuild ------------------------------------------------------------------- Fri Mar 9 15:16:59 CET 2001 - schwab@suse.de - Fix missing crypt declaration. ------------------------------------------------------------------- Fri Feb 23 08:57:55 CET 2001 - cihlar@suse.cz - update to version 2.5.1p1 - update x11-ssh-askpass to version 1.2.0 ------------------------------------------------------------------- Tue Feb 20 11:27:20 CET 2001 - cihlar@suse.cz - modified README.SuSE [#4365] - fixed start script to agree with skeleton - fixed start script so "stop" kills only sshd listening for connections - compiled with --with-openssl - "ListenAddress 0.0.0.0" in sshd_config commented out - listen on both ipv4 and ipv6 - fixed var/adm/notify/messages/openssh_update [#6406] ------------------------------------------------------------------- Thu Jan 25 15:02:01 CET 2001 - smid@suse.cz - startup script fixed [#5559] ------------------------------------------------------------------- Tue Jan 16 09:40:50 CET 2001 - nadvornik@suse.cz - libcrypto linked static [#5333] ------------------------------------------------------------------- Thu Jan 11 13:41:48 CET 2001 - cihlar@suse.cz - uncomment sftp-server part in sshd_config - added /usr/X11R6/lib/X11/app-defaults/SshAskpass to %files ------------------------------------------------------------------- Thu Jan 11 12:37:10 CET 2001 - cihlar@suse.cz - fixed %files [#5230] - fixed installation of x11-ssh-askpass to BuildRoot - added man pages of x11-ssh-askpass ------------------------------------------------------------------- Wed Jan 10 11:54:42 CET 2001 - smid@suse.cz - notice about how to enable ipv6 added to mail - for administrator [#5297] ------------------------------------------------------------------- Wed Dec 13 10:43:25 CET 2000 - smid@suse.cz - default ipv6 listennig disabled (problems with libc2.2) [#4588] ------------------------------------------------------------------- Tue Dec 5 14:03:35 CET 2000 - smid@suse.cz - notify message changed ------------------------------------------------------------------- Mon Dec 4 21:45:35 CET 2000 - lmuelle@suse.de - fixed provides/ conflicts to ssh ------------------------------------------------------------------- Thu Nov 30 16:03:34 CET 2000 - smid@suse.cz - path to ssh-askpass fixed - stop in %preun removed - new init style ------------------------------------------------------------------- Sun Nov 26 23:53:53 CET 2000 - schwab@suse.de - Restore rcsshd link. ------------------------------------------------------------------- Sun Nov 26 15:34:12 CET 2000 - kukuk@suse.de - Add openssl-devel to neededforbuild ------------------------------------------------------------------- Mon Nov 20 16:11:34 CET 2000 - smid@suse.cz - New version 2.3.0 ------------------------------------------------------------------- Wed Sep 6 12:52:06 CEST 2000 - smid@suse.cz - remove --with-ipv4-default option ------------------------------------------------------------------- Wed Jul 5 19:04:28 CEST 2000 - garloff@suse.de - ... and tell the sysadmin and user more about what they can do about it (schwab). ------------------------------------------------------------------- Wed Jul 5 00:55:37 CEST 2000 - garloff@suse.de - Inform the user (admin) about the fact that the default behaviour with respect to X11-forwarding has been changed to be disabled. ------------------------------------------------------------------- Wed Jun 28 13:11:08 CEST 2000 - smid@suse.cz - warning that generating DSA key can an take a long time. (bugzilla 3015) - writing to wtmp and lastlog fixed (bugzilla 3024) - reading config file (parameter Protocol) fixed ------------------------------------------------------------------- Fri Jun 16 10:42:52 CEST 2000 - garloff@suse.de - Added generation of ssh_host_dsa_key ------------------------------------------------------------------- Tue Jun 13 08:32:19 MEST 2000 - nadvornik@suse.cz - update to 2.1.1p1 ------------------------------------------------------------------- Thu Jun 8 10:10:55 MEST 2000 - cihlar@suse.cz - uncommented %clean ------------------------------------------------------------------- Fri May 5 13:08:15 CEST 2000 - smid@suse.cz - buildroot added - upgrade to 1.2.3 ------------------------------------------------------------------- Tue Mar 21 09:50:57 CET 2000 - kukuk@suse.de - Update to 1.2.2p1 ------------------------------------------------------------------- Mon Mar 6 12:03:49 CET 2000 - kukuk@suse.de - Fix the diff. ------------------------------------------------------------------- Sun Mar 5 18:22:07 CET 2000 - kukuk@suse.de - Add a README.SuSE with a short description how to use ssh-add ------------------------------------------------------------------- Tue Feb 29 21:03:50 CET 2000 - schwab@suse.de - Update config.{guess,sub}. ------------------------------------------------------------------- Fri Feb 25 11:01:24 CET 2000 - kukuk@suse.de - Fix need for build, add group tag. ------------------------------------------------------------------- Wed Feb 2 09:23:13 CET 2000 - kukuk@suse.de - Change new defaults back to old one ------------------------------------------------------------------- Sun Jan 30 12:51:49 CET 2000 - kukuk@suse.de - Add x11-ssh-askpass to filelist ------------------------------------------------------------------- Fri Jan 28 18:03:50 CET 2000 - kukuk@suse.de - Update to OpenSSH 1.2.2 - Add x11-ssh-askpass-1.0 ------------------------------------------------------------------- Tue Jan 25 15:57:09 CET 2000 - kukuk@suse.de - Add reload and status to /sbin/init.d/sshd [Bug 1747] ------------------------------------------------------------------- Thu Jan 20 17:26:02 CET 2000 - kukuk@suse.de - Update to 1.2.1pre27 with IPv6 support ------------------------------------------------------------------- Fri Dec 31 21:18:10 CET 1999 - kukuk@suse.de - Initial version
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
