openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File FAQ of Package xinetd.5694

xinetd FAQ

Q. What is xinetd ?
A. xinetd is a replacement for inetd, the internet services daemon.

Q: I am not a system administrator; what do I care about an inetd
replacement ?
A: xinetd is not just an inetd replacement. Anybody can use it to start
servers that don't require privileged ports because xinetd does not require
that the services in its configuration file be listed in /etc/services.

Q. Is it compatible with inetd ?
A. No, its configuration file has a different format than inetd's one and it
understands different signals. However the signal-to-action assignment can
be changed and a program has been included to convert inetd.conf to
xinetd.conf.

Q. Why should I use it ?
A. Because it is a lot better (IMHO) than inetd. Here are the reasons:

1) It can do access control on all services based on:
     a. address of remote host
     b. time of access
     c. name of remote host
     d. domain name of remote host
2) Access control works on all services, whether multi-threaded or
single-threaded and for both the TCP and UDP protocols. All UDP packets can
be checked as well as all TCP connections.
3) It provides hard reconfiguration:
     a. kills servers for services that are no longer in the configuration
     file
     b. kills servers that no longer meet the access control criteria
4) It can prevent denial-of-access attacks by
     a. placing limits on the number of servers for each service (avoids
     process table overflows)
     b. placing an upper bound on the number of processes it will fork
     c. placing limits on the size of log files it creates
     d. placing limits on the number of connection a single host can
     initiate
     e. place limits on the rate of incoming connections
     f. discontinue services if the load exceeds specified limit
5) Extensive logging abilities:
     a. for every server started it can log:
          i) the time when the server was started
          ii) the remote host address
          iii) who was the remote user (if the other end runs a
          RFC-931/RFC-1413 server)
          iv) how long the server was running
          (i, ii and iii can be logged for failed attempts too).
     b. for some services, if the access control fails, it can log
     information about the attempted access (for example, it can log the
     user name and command for the rsh service)
6) No limit on number of server arguments
7) You can bind specifc services to specific IP's on your host machine

Q. Whom should I thank/blame for this program ?
A. panos@cs.colorado.edu originally wrote this program, but I am fielding
bug reports at this time.

Q. What's up with 2.2.1 version of xinetd?
A. The most recent original version of xinetd was 2.1.1 with patches
bringing it up to 2.1.8. Nick Hilliard created xinetd 2.2.1, based off an
unreleased xinetd 2.2.0 by Panos. The copyright included with xinetd
specified the required versioning to be the official release of xinetd
(2.1.8 in this case) and a fourth version number tacked on to indicate the
modification level. This is the versioning I have adopted. xinetd 2.1.8.X,
which is available here, is not based off xinetd 2.2.0 or higher. It was
created from the codebase of xinetd 2.1.8, although I have re-implemented
some of the features introduced in xinetd-2.2.1.

Q. Where can I find the latest-and-greatest version ?
A. The xinetd source can be obtained from http://www.synack.net/xinetd

Q. Has anyone been able to get qmail working with xinetd?
A. yes, here is the entry info

service smtp
{
        flags           = REUSE NAMEINARGS
        socket_type     = stream
        protocol        = tcp
        wait            = no
        user            = qmaild
        server          = /usr/sbin/tcpd
        server_args     = /var/qmail/bin/tcp-env -R /var/qmail/bin/qmail-smtpd
}

Contributed by: Anthony Abby
This method will allow you to set environment variables and whatnot in
/etc/hosts.allow. Although xinetd can be compiled with libwrap support, this
doesn't mean it can completly replace tcpd's functionality. xinetd calls
host_access(), which performs the access control documented in
host_access(5) man page. This is a subset of the features offered by tcpd.

Q. What platforms is xinetd know to work on?
A. I have run it on Solaris 2.6 (sparc and x86), Linux, BSDi, and IRIX 5.3
and 6.2. The original package ran on SunOS 4 and Ultrix.

Q. How to do setup a chrooted environment for a service?
A. Here is the config file entry:

service telnet_chroot
{
        log_on_success  = HOST PID DURATION USERID
        log_on_failure  = HOST RECORD USERID
        no_access       = 152.30.11.93
        socket_type     = stream
        protocol        = tcp
        port            = 8000
        wait            = no
        user            = root
        server          = /usr/sbin/chroot
        server_args     = /var/public/servers /usr/libexec/telnetd
}

Contributed by: lburns@sasquatch.com

Q. xinetd doesn't work well with RPC, I need RPC and I really want to run
xinetd. Can I?
A. Yes. xinetd and inetd should happily coexist. Have your RPC stuff run
from your normal inetd (removing all other services from your inetd.conf),
then have xinetd run all your other services.

Q. How do I use itox?
A. itox reads in a regular inetd.conf file from stdin and writes an
xinetd.conf file to stdout. In general, you use the command:
itox < /etc/inetd.conf > /etc/xinetd.conf
If your inetd.conf does not have explicit paths to each of the daemons, you
must use the -daemon_dir option. Suppose all your daemons live in /usr/sbin,
use the following command:
itox -daemon_dir=/usr/sbin < /etc/inetd.conf > /etc/xinetd.conf
itox is rather old and hasn't been updated for a while. xconv.pl is a perl
script that is a little better about converting modern inetd.conf files.
It's usage is similar to itox's.

Q. Does xinetd support libwrap (tcpwrappers)?
A. Yes. xinetd can be compiled with libwrap support by passing
--with-libwrap as an option to the configure script. When xinetd is compiled
with libwrap support, all services can use the /etc/hosts.allow and
/etc/hosts.deny access control. xinetd can also be configured to use tcpd in
the traditional inetd style. This requires the use of the NAMEINARGS flag,
and the name of the real daemon be passed in as server_args. Here is an
example for using telnet with tcpd:

service telnet
{
        flags       = REUSE NAMEINARGS
        protocol    = tcp
        socket_type = stream
        wait        = no
        user        = telnetd
        server      = /usr/sbin/tcpd
        server_args = /usr/sbin/in.telnetd
}

Q. Does xinetd support IPv6?
A. Yes. xinetd can be compiled with IPv6 support by adding the --with-inet6
option to the configure script. Access control is functional with IPv6. You
can use ipv4 mapped addresses, or give normal dotted quad ipv4 addresses for
access control, and xinetd will map them to ipv6 addresses.

Q. No services start with IPv6! What's the deal?
A. When you compile IPv6 support in, all sockets are IPv6 sockets. If your
kernel doesn't understand what an IPv6 socket is, all attempts to create
sockets will fail, and no services will start. Only compile xinetd with IPv6
support if your kernel supports IPv6.

Q. What's this setgroups(0, NULL) error?
A. By default, xinetd does not allow group permissions to the server
processes, and it does this by setting the groups of the child process to
nothing. Some BSD's have a problem with this. To avoid this error, put the
directive groups = yes into your services. This says to allow the server
process to have all the group privleges entitled to the user the server
process is running as.

Q. Why can't telnetd start normally on Linux?
A. On some Linux distributions, the telnet daemon starts as a nonprivleged
user, but the user belongs to groups that allow it to open new tty's, and to
update utmp. By default, xinetd does not allow group permissions to the
server process, so telnetd can fail to start properly. To get the server
process to posess the proper groups, use the groups = yes directive for the
telnet service. This will tell xinetd that it is OK for the server process
to start with all the groups the user has access to.

Q. How do I use xinetd to wrap SSL around services
A. Use the program stunnel to wrap SSL around services. This can actually be
used by an inetd.

Q. How do I setup a cvs server with xinetd?
A. A user wrote in with this suggestion:

cvspserver  stream tcp nowait root /usr/bin/cvs cvs --allow-root=/home/pauljohn/cvsroot  --allow-root=/home/pauljohn/cvsmisc pserver

If you want to make the same work under xinetd, you save a config file in
/etc/xinetd.d called cvspserver, (where the last line tells it the names of
your repositories):

service cvspserver
{
        socket_type         = stream
        protocol            = tcp
        wait                = no
        user                = root
        passenv             =
        server              = /usr/bin/cvs
        server_args         = --allow-root=/home/pauljohn/cvsroot --allow-root=/home/pauljohn/cvsmisc pserver
}

All the other cvs setup stuff is the same. This seems to work, afaik.

Places

File FAQ of Package xinetd.5694

Places