File _patchinfo of Package patchinfo.4345

<patchinfo incident="4345">
  <issue id="1039045" tracker="bnc">root filesystem goes readonly after some tape drive changes</issue>
  <issue id="1030314" tracker="bnc">multipath problem building maps</issue>
  <issue id="1032487" tracker="bnc">boot hangs after update with root=UUID</issue>
  <issue id="1037299" tracker="bnc">with dracut-037-91.1 mdadm array assembly occurs before multipathd is started.</issue>
  <issue id="1033541" tracker="bnc">kpartx regression: does not remove partitions</issue>
  <issue id="1019798" tracker="bnc">multipathd increments number of remaining active paths beyond true value</issue>
  <issue id="1005255" tracker="bnc">Adding custom alias entries manually to the bindings file requires reboot, is this supported?</issue>
  <issue id="1003972" tracker="bnc">multipath -ll gives strange output after cable is pulled</issue>
  <issue id="1005414" tracker="bnc">multipathd uxlistener dies</issue>
  <issue id="1005546" tracker="bnc">'DM message failed' messages from multipathd</issue>
  <issue id="1006118" tracker="bnc">race condition with root on multipath</issue>
  <issue id="1006469" tracker="bnc">System drop to emergency mode when rebooting after installation</issue>
  <issue id="1008691" tracker="bnc">kpartx not working as expected</issue>
  <issue id="1017009" tracker="bnc">filtering by devnode fails in multipath -u -i</issue>
  <issue id="1019181" tracker="bnc">multipathd.service needs "Before: lvm2-activation-early.service"</issue>
  <issue id="1022996" tracker="bnc">Error in /sbin/multipathd: free(): invalid size: 0x00007f9aa8109c90  after disable a SAN port of one HBA</issue>
  <issue id="941954" tracker="bnc">multipath -f command hangs on SLES12 SP1 lpar (multipath-tools)</issue>
  <issue id="979280" tracker="bnc">multipath-tools update RPM "0.5.0-52.1.x86_64" lets OS drop to emergency shell</issue>
  <issue id="980933" tracker="bnc">update to multipath-tools-0.4.9-112.1 causes a single path loss to loose the complete map</issue>
  <issue id="983167" tracker="bnc">systemd.pc in systemd package rather than systemd-devel</issue>
  <issue id="984669" tracker="bnc">multipath boot race, (re)triggering uevents</issue>
  <issue id="986734" tracker="bnc">sles12sp2 beta3 frequent boots to emergency mode following mount failures</issue>
  <issue id="986838" tracker="bnc">Multipath hangs (using the multipath -F command)</issue>
  <issue id="991432" tracker="bnc">multipathd patches request for SLES11 and SLES12</issue>
  <issue id="999522" tracker="bnc">Upstream multipath configuration option 'find_multipaths' not present in SLES code</issue>
  <issue id="319070" tracker="fate"/>
  <category>recommended</category>
  <rating>moderate</rating>
  <packager>mwilck</packager>
  <summary>Recommended update for multipath-tools</summary>
  <description>
This update for multipath-tools provides the following fixes:

- Add /usr/lib/dracut/dracut.conf.d/50-multipath-tools.conf. (bsc#1039045, bsc#1030314,
  bsc#1032487, bsc#1037299)
- Fix sanitize delete partitions in kpartx. (bsc#1033541)
- Fix check for new path states. (bsc#1019798)
- Use existing alias from bindings file. (bsc#1005255)
- Fix memory corruption problem in multipathd. (bsc#1022996)
- Sanitize how kpartx delete partitions. (bsc#1008691)
- Issue systemd READY after initial configuration. (bsc#1006469, bsc#1006118)
- Re-add 'Before: lvm2-activation-early.service' to multipathd.service. (bsc#1019181)
- Fix filtering of device-mapper devices. (bsc#1017009)
- Do not load invalid maps. (bsc#1005546)
- Calculate priority even for ghost paths. (bsc#1005546)
- Skip conf==NULL check in socket listener thread. (bsc#1005414)
- Set DI_SERIAL in 'multipath -ll' output. (bsc#991432)
- Fall back to search paths by devt. (bsc#1003972)
- Add new "find_multipaths" configuration option. (bsc#999522)
- Add "need_suspend" parameter. (bsc#986838)
- Check partitions unused before removing. (bsc#986838)
- Start multipathd daemon after udev trigger. (bsc#986734, bsc#984669)
- Fix check from udev rules. (bsc#986734, bsc#984669)
- Remove calls to dm_udev_complete. (bsc#986838)
- Add 'wwn' and 'serial' keywords to weightedpath prioritizer. (bsc#991432)
- Update multipath.rules to deal with partition devices. (bsc#979280)
- Avoid potential memory overflow allocating polls in uxlsnr.
- Correctly zero out cookie in libmultipath's dm_simplecmd.
- Ensure multipathd enters IDLE mode before sleeping in checkerloop().
- Prevent multipathd from accessing configuration in IDLE mode.
- Fix loss of the complete multipath map after single path loss. (bsc#980933)
- Fix systemd build requirements. (bsc#983167)
- Add fixes for md_monitor on zFCP. (fate#319070)
</description>
</patchinfo>