Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-12:Update
radvd
radvd.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File radvd.changes of Package radvd
------------------------------------------------------------------- Thu Mar 13 11:29:05 CET 2014 - jbohac@suse.cz - fix the radvd.service file to use /etc/sysconfig/radvd (bnc#854316) ------------------------------------------------------------------- Fri Jan 10 14:19:44 CET 2014 - jbohac@suse.cz - Update to version 1.9.7 * ioctl bug fix for getting the hardware address and mtu of an interface - Update to version 1.9.6 * Check AdvSendAdvert before sending an advertisement - Update to version 1.9.5 * IPv6 forwarding setting should be 1 or 2 * Performance fix in netlink message processing * fix for kernels with no NETLINK_NO_ENOBUFS defined * distributing gz, bz2 and xz tarballs * also distributing md5, sha1, sha256 and gpg signatures - Update to version 1.9.4 * IPv6 forwarding setting should be 1 or 2 * Performance fix in netlink message processing * fix for kernels with no NETLINK_NO_ENOBUFS defined * distributing gz, bz2 and xz tarballs * also distributing md5, sha1, sha256 and gpg signatures - Update to version 1.9.3 * check for sys/sysctl.h availability * radvdump fix to interpret MTU and Route - Update to version 1.9.2 * A few minor Makefile.am fixes - Update to version 1.9.1 * Replacing a '==' in configure with '=' for better shell portability - added .asc (gpg key not yet found) ------------------------------------------------------------------- Tue Nov 5 12:44:38 UTC 2013 - speilicke@suse.com - Don't start daemon after package installation, the default config is almost useless and previous package versions installed even bad ones into /etc/radvd.conf (it would never be fixed since the file is %ghost %config(noreplace) - Fix try-restart to only restart the daemon if it's actually running. Allow condrestart, which is LSB ------------------------------------------------------------------- Wed Dec 5 19:24:34 UTC 2012 - dimstar@opensuse.org - Add radvd-tmpfile-grpname.patch: On openSUSE, the radvd user is added to the 'daemon' group (not a specific 'radvd' group). Thus adjusting the groupname in for the file to be installed in tmpfiles.d. Otherwise, the systemd-tmpfiles service fails to start (and radvd can't find the /var/run folder). ------------------------------------------------------------------- Thu Jun 14 16:14:42 UTC 2012 - crrodriguez@opensuse.org - Remove URL from source as this is a git snapshot ------------------------------------------------------------------- Thu Jun 14 01:00:56 UTC 2012 - crrodriguez@opensuse.org - Update to version 1.9rc1.xxx * Support systemd tmpfiles.d * add Native systemd units for this service * Uses libdaemon to deamonize and store PID file. * Use setsockopt NETLINK_NO_ENOBUFS * fixes debian bug 634485 ------------------------------------------------------------------- Fri Dec 2 16:43:39 UTC 2011 - coolo@suse.com - add automake as buildrequire to avoid implicit dependency ------------------------------------------------------------------- Wed Nov 16 14:23:54 UTC 2011 - dimstar@opensuse.org - Update to version 1.8.3: + proper tracking of buffer usage in send_ra - Drop diff_release_1_8_2..44ee01c7.patch: fixed upstream. ------------------------------------------------------------------- Wed Oct 19 11:53:20 CEST 2011 - jbohac@suse.cz - Update to version 1.8.3-rc1 - additional patches up to commit 44ee01c7 to fully fix the path traversal CVE-2011-3602 (bnc#721968) ------------------------------------------------------------------- Thu Sep 29 02:15:09 UTC 2011 - crrodriguez@opensuse.org - Update to version 1.8.1 for details see NEWS - Fix package building in factory, creating /var/run/radvd before being marked as %ghost - Run spec cleaner ------------------------------------------------------------------- Tue May 3 14:36:57 UTC 2011 - lnussel@suse.de - new version 1.7: - Fix an unintentional change in 1.3: RAs were accidentally often unicast to solicitors instead of being multicast. This is still compliant with the specification but is not optimal. - Allow radvd.conf prefix, clients, route, and RDNSS options to be in any order. - exit if the number of prefixes/routes/etc. would grow too much. - Fix radvd skipping multiple interfaces when UnicastOnly is on or AdvSendAdvert is off. This got broken in radvd 1.3. - Fix a segmentation fault on reload_config() timer list corruption that only occurs with multiple interfaces. - Add '-c' flag to test configuration. - Deprecate old, pre-RFC5006 parameters. Support RFC6106 by adding DNS Search List support. - run as user radvd by default (bnc#691456) - clean up init script - install a small default config that advertises ULAs. Default prefix is autogenerated to get a different for on each installation. - start even if forwarding is not on to be able to work with ULAs only ------------------------------------------------------------------- Wed Jul 29 11:29:23 CEST 2009 - jbohac@suse.cz - Update to version 1.3: - mainly compilation fixes - decreased the default valid and preferred lifetimes - support for arbitrary interface names ------------------------------------------------------------------- Wed Aug 20 15:21:26 CEST 2008 - jbohac@suse.cz - Update to version 1.1: - Implement privilege separation on Linux: a master root process (which is able to reconfigure interfaces) and the main process. There is '-s' toggle to keep old behaviour. - Fix Linux retrans_timer on old kernels (newer ones have retrans_timer_ms) - Fix stderr+syslog (default) logging on non-i386 platforms. - Require that interface must be RUNNING instead of just UP. Note: this could break deployments with very old kernels. - Implement automatic interface address advertising with special prefix ::/64. - Relax interface naming (e.g. with VLANs) requirements. - Fix ordering of route, prefix and RDNSS options (only matters with RDNSS) ------------------------------------------------------------------- Tue Nov 27 16:45:46 CET 2007 - jbohac@suse.cz - Update to version 1.0: - Fix AdvDefaultLifetime initalization, broken in 0.9.1. - Fix STDERR+syslog logging, don't try STDERR after forking. - Implement RDNSS draft with (non-allocated) ND type code 25. - Redefined IgnoreIfMissing: failed interfaces are now reinitialized by default. IgnoreIfMissing only omits warnings about these. - Unblock SIGALRM at startup. - Implement MAX_INITIAL_RTR_ADVERT_INTERVAL handling (upstream fix for #149014) - Perform some dynamic/static code audit, fix some minor bugs and do cleanup as a result. ------------------------------------------------------------------- Thu Mar 29 16:56:53 CEST 2007 - rguenther@suse.de - Add bison and flex BuildRequires. ------------------------------------------------------------------- Thu Jul 20 16:27:50 CEST 2006 - schwab@suse.de - Call autoreconf to work around broken time stamps. ------------------------------------------------------------------- Wed Feb 8 11:58:41 CET 2006 - okir@suse.de - Make radvd limit the initial RA intervals according to RFC 2461. Needed for IPv6 Ready Logo (#149014) ------------------------------------------------------------------- Wed Jan 25 21:41:04 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Mon Dec 12 12:29:36 CET 2005 - okir@suse.de - Update to latest upstream version 0.9 ------------------------------------------------------------------- Tue Feb 22 14:29:22 CET 2005 - kukuk@suse.de - Update to 0.7.3 (merge of all fixes) ------------------------------------------------------------------- Wed Feb 4 11:47:54 CET 2004 - kukuk@suse.de - Add some patches from RedHat package ------------------------------------------------------------------- Sun Jan 11 12:47:31 CET 2004 - adrian@suse.de - add %defattr ------------------------------------------------------------------- Fri Aug 15 13:11:30 CEST 2003 - kukuk@suse.de - Add ServiceRestart tag to sysconfig file [Bug #28927] ------------------------------------------------------------------- Fri Jan 17 13:43:46 CET 2003 - kukuk@suse.de - Update to version 0.7.2 (VLAN support) ------------------------------------------------------------------- Thu Jan 16 16:36:02 CET 2003 - kukuk@suse.de - Add metadata to sysconfig template [Bug #22678] ------------------------------------------------------------------- Thu Aug 1 15:37:02 CEST 2002 - kukuk@suse.de - Add PreRequires for insserv and fillup ------------------------------------------------------------------- Mon Mar 4 17:23:11 CET 2002 - kukuk@suse.de - Rename OPTIONS variable to RADVD_OPTIONS ------------------------------------------------------------------- Thu Jan 24 10:42:48 CET 2002 - kukuk@suse.de - Update to version 0.7.1 (minor fixes) ------------------------------------------------------------------- Sat Jan 12 22:13:17 CET 2002 - kukuk@suse.de - Add options to radvd ------------------------------------------------------------------- Sat Jan 12 20:06:04 CET 2002 - kukuk@suse.de - Add radvd sysconfig option file - Don't source rc.config in init script ------------------------------------------------------------------- Fri Nov 23 16:04:44 CET 2001 - kukuk@suse.de - update to 0.7.0 - Remove START variable - Cleanup init script ------------------------------------------------------------------- Wed Jun 6 18:55:26 CEST 2001 - bjacke@suse.de - update to 0.6.2pl3 ------------------------------------------------------------------- Mon Apr 23 10:35:11 CEST 2001 - kukuk@suse.de - Fix type in START variable ------------------------------------------------------------------- Mon Apr 9 14:13:12 CEST 2001 - bjacke@suse.de - init script rework ------------------------------------------------------------------- Mon Feb 5 14:04:08 CET 2001 - bjacke@suse.de - updated to 0.6.2 ------------------------------------------------------------------- Wed Jan 10 19:20:44 CET 2001 - bjacke@suse.de - removed service from runlevel 2 ------------------------------------------------------------------- Mon Nov 27 22:24:00 CET 2000 - bjacke@suse.de - moved init script to /etc/init.d ------------------------------------------------------------------- Thu Nov 23 14:02:00 CET 2000 - bjacke@suse.de - use insserv for init.d script ------------------------------------------------------------------- Mon Nov 13 17:34:13 CET 2000 - bjacke@suse.de - some specfile fixes ------------------------------------------------------------------- Mon Oct 28 08:40:42 CEST 2000 - bjacke@suse.de - initial build
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
