File clean-the-disk-information-when-commands-fail-in-int.patch of Package parted.15765

From 5a61f15b7003cba73e6517ac22204bafd9a3cb8e Mon Sep 17 00:00:00 2001
From: Wang Dong <dongdwdw@linux.vnet.ibm.com>
Date: Fri, 23 Dec 2016 06:53:38 +0100
Subject: [PATCH] clean the disk information when commands fail in interactive
 mode.

parted always reads disk information to memory before any
operations. The disk that user operates is actually
a copy of real one in memory. When the information in memory
is changed, it will commit the memory to device to update the
disk information.

Once the disk information is read, parted will never re-read it
again unless another device is loaded or the device is re-read.
Above work has been done in commit 7eac058 (parted: don't reload
partition table on every command)

Each command of parted always commits the memory when it succeeds.
Then the disk information on device and in memory are the same.
But when it fails, they might be different. User will be confused
by this, and sometimes get undesired result with the contaminated
memory. This memory should be cleaned if some command fails.
Then the command followed will re-read the disk.

Signed-off-by: Wang Dong <dongdwdw@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
---
 parted/parted.c | 14 ++++++++++----
 parted/ui.c     |  8 +++++++-
 2 files changed, 17 insertions(+), 5 deletions(-)

Index: parted-3.2/parted/parted.c
===================================================================
--- parted-3.2.orig/parted/parted.c
+++ parted-3.2/parted/parted.c
@@ -1501,8 +1501,12 @@ _rescue_add_partition (PedPartition* par
                 default: break;
         }
 
-        ped_partition_set_system (part, fs_type);
-        ped_disk_commit (part->disk);
+        if (!ped_partition_set_system (part, fs_type))
+                return 0;
+
+        if (!ped_disk_commit (part->disk))
+                return 0;
+
         return 1;
 }
 
@@ -1727,8 +1731,10 @@ do_rm (PedDevice** dev, PedDisk** diskp)
         if (!_partition_warn_busy (part, danger_if_busy))
                 goto error;
 
-        ped_disk_delete_partition (*diskp, part);
-        ped_disk_commit (*diskp);
+        if (!ped_disk_delete_partition (*diskp, part))
+                goto error;
+        if (!ped_disk_commit (*diskp))
+                goto error;
 
         if ((*dev)->type != PED_DEVICE_FILE)
                 disk_is_modified = 1;
Index: parted-3.2/parted/ui.c
===================================================================
--- parted-3.2.orig/parted/ui.c
+++ parted-3.2/parted/ui.c
@@ -1614,8 +1614,14 @@ interactive_mode (PedDevice** dev, PedDi
                         cmd = command_get (commands, word);
                         free (word);
                         if (cmd) {
-                                if (!command_run (cmd, dev, disk))
+                                if (!command_run (cmd, dev, disk)) {
                                         command_line_flush ();
+
+                                        if (*disk) {
+                                                ped_disk_destroy (*disk);
+                                                *disk = 0;
+                                        }
+                                }
                         } else
                                 print_commands_help ();
                 }