File s390-tools-sles15sp1-04-zdev-Implement-no-settl... of Package s390-tools.14220

Overview Repositories Revisions Requests Users Attributes Meta

File s390-tools-sles15sp1-04-zdev-Implement-no-settle.patch of Package s390-tools.14220

Subject: zdev: Implement --no-settle
From: Peter Oberparleiter <oberpar@linux.ibm.com>

Summary:     zdev: Add support for handling I/O configuration data
Description: LPARs that are running in IBM Dynamic Partition Manager (DPM) mode
             can access a firmware-generated I/O configuration data file that
             contains s390-specific information about available I/O devices
             such as qeth device numbers and parameters, and FCP device IDs.

This data file is intended to remove the need for users to
             manually enter the corresponding device data during installation.

Linux kernels with the corresponding support make the I/O
             configuration data available at the following location:

/sys/firmware/sclp_sd/config/data

This patch set adds support for handling this data file using the
             chzdev and lszdev tools:

- I/O configuration data can be applied using chzdev's --import
                 option
               - Initial RAM-Disk scripts automatically apply the
                 I/O configuration data to the system configuration
               - lszdev can be used to display the applied auto-configuration
                 data
               - chzdev can be used to manually override the
                 auto-configuration data

Upstream-ID: f32bff96881a04bb68b895c23b13ae50daa9e7b4
Problem-ID:  LS1604

Upstream-Description:

zdev: Implement --no-settle

There are some situations where running "udevadm settle" can result in
             a deadlock, such as in the early stages of initial RAM-disk processing.

Introduce a new command-line option --no-settle that can be used to
             suppress calling "udevadm settle" to allow chzdev to be run in such
             situations.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
             Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>

--- a/zdev/include/udev.h
+++ b/zdev/include/udev.h
@@ -14,6 +14,7 @@
 #include "exit_code.h"
 
 extern int udev_need_settle;
+extern int udev_no_settle;
 
 /* Single key-operator-value entry in a udev rule line.*/
 struct udev_entry_node {
--- a/zdev/man/chzdev.8
+++ b/zdev/man/chzdev.8
@@ -528,6 +528,15 @@ device configuration persistent. Typical
 initial RAM disk, or modifying the kernel command line.
 .PP
 .
+.OD no-settle "" ""
+Do not wait for udev processing to complete.
+
+Skips all calls to the udevadm tool that are intended to wait for udev to
+finish processing before continuing. There is typically no need to use this
+option unless chzdev is run in an environment where udev is not fully
+functional (such as in the early phase of an initial RAM disk).
+.PP
+.
 .OD persistent "p" ""
 Apply changes to persistent configuration only.
 
--- a/zdev/src/chzdev.c
+++ b/zdev/src/chzdev.c
@@ -95,6 +95,7 @@ struct options {
 	struct util_list *base;		/* List of struct strlist_node */
 	unsigned int verbose:1;
 	unsigned int quiet:1;
+	unsigned int no_settle:1;
 };
 
 /* Makefile converts chzdev_usage.txt into C file which we include here. */
@@ -136,6 +137,7 @@ enum {
 	OPT_VERSION		= 'v',
 	OPT_VERBOSE		= 'V',
 	OPT_QUIET		= 'q',
+	OPT_NO_SETTLE		= (OPT_ANONYMOUS_BASE+__COUNTER__),
 };
 
 static struct opts_conflict conflict_list[] = {
@@ -217,6 +219,7 @@ static const struct option opt_list[] =
 	{ "base",		required_argument, NULL, OPT_BASE },
 	{ "verbose",		no_argument,	NULL, OPT_VERBOSE },
 	{ "quiet",		no_argument,	NULL, OPT_QUIET },
+	{ "no-settle",		no_argument,	NULL, OPT_NO_SETTLE },
 	{ NULL,			no_argument,	NULL, 0 },
 };
 
@@ -937,6 +940,11 @@ static exit_code_t parse_options(struct
 			opts->quiet = 1;
 			break;
 
+		case OPT_NO_SETTLE:
+			/* --no-settle */
+			opts->no_settle = 1;
+			break;
+
 		case ':':
 			/* Missing option argument. */
 			syntax("Option '%s' requires an argument\n",
@@ -2904,6 +2912,7 @@ int main(int argc, char *argv[])
 	force	= opts.force;
 	yes	= opts.yes;
 	dryrun	= opts.dryrun;
+	udev_no_settle = opts.no_settle;
 	path_set_base(opts.base);
 
 	if (dryrun)
--- a/zdev/src/chzdev_usage.txt
+++ b/zdev/src/chzdev_usage.txt
@@ -54,5 +54,6 @@ OPTIONS
       --no-root-update   Skip root device update
       --dry-run          Display changes without applying
       --base PATH        Use PATH as base for accessing files
+      --no-settle        Do not wait for udev to settle
   -V, --verbose          Print additional run-time information
   -q, --quiet            Print only minimal run-time information
--- a/zdev/src/udev.c
+++ b/zdev/src/udev.c
@@ -24,6 +24,7 @@
 #include "udev.h"
 
 int udev_need_settle = 0;
+int udev_no_settle;
 
 /* Create a newly allocated udev entry. */
 static struct udev_entry_node *udev_entry_node_new(const char *key,
@@ -403,5 +404,7 @@ exit_code_t udev_remove_rule(const char
 /* Wait for all current udev events to finish. */
 void udev_settle(void)
 {
+	if (udev_no_settle)
+		return;
 	misc_system(err_ignore, "%s settle", PATH_UDEVADM);
 }

Places

File s390-tools-sles15sp1-04-zdev-Implement-no-settle.patch of Package s390-tools.14220

Places