File bluez.changes of Package bluez.7912

Fri Jul 13 09:16:23 UTC 2018 -

- add 0001-core-Fixes-order-InterfaceAdded.patch (boo#1101119)
  to fix headset connect after suspend/resume

Thu Jun 28 10:27:23 UTC 2018 -

- Add lost patches for RPi3 bluetooth support (bsc#995059)(bsc#1094902)

Fri May  4 04:20:36 UTC 2018 -

- Add
  * Fix hcidump memory leak in pin_code_reply_dump().
  * Fix hcidump buffer overflow in commands_dump().

Tue Jan 30 16:05:52 UTC 2018 -

- Add disable_some_obex_tests.patch bypass boo#1078285 for PowerPC

Fri Dec 29 17:21:34 UTC 2017 -

- update to version 5.48:
  This release brings many fixes and feature enhancements.
  Some notable enhancements include support for devices with the
  BLE battery service, as well as improved Mesh support in the
  meshctl tool. Several previously experimental D-Bus APIs have now
  been marked as stable, notably the Advertising Manager API as
  well as the AquireWrite & AquireNotify GATT APIs.
  As far as fixes go, these can be found in many areas of the stack,
  including A2DP, AVCTP, device discovery, Mesh, and GATT.

Tue Dec 12 08:23:07 UTC 2017 -

- add 0001-obexd-use-AM_LDFLAGS-for-linking.patch
- document systemd dependency during %post

Sun Sep 17 22:34:07 UTC 2017 -

- update to version 5.47:
  This release contains various fixes to GATT, A2DP and BR/EDR vs
  LE bearer handling. There’s also a notable SDP fix for CVE-2017-
  1000250 (part of the recently announced BlueBorne vulnerabilities).
  Feature-wise, there’s now support for adding the appearance and
  local name to advertising data through the Advertising D-Bus
  interface. The btmon tool is now also able to better decode most
  Bluetooth 5.0 HCI commands and events.
  The Bluetooth Mesh Profile specification was released recently,
  and this BlueZ release comes with initial support for it in the
  form of a new meshctl tool. Using this tool it’s possible to
  provision mesh devices through the GATT Provisioning Bearer
  (PB-GATT), as well as communicate with them (e.g. configure them)
  using the GATT Proxy protocol.

Sat Jul 15 07:14:55 UTC 2017 -

- update to version 5.46:
  * Fix issue with handling ATT over BR/EDR connections.
  * Fix issue with SDP browsing cleanup after connection.
  * Fix issue with pointer dereference and OPP Put request.
  * Fix issue with identity address updates during pairing.
  * Fix issue with not removing services that had disappeared.
  * Add support for improved discovery of included services.
  * Add support for simplified characteristics discovery.
  * Add support for GATT caching configuration option.
  * Add experimental support for AcquireWrite and AcquireNotify.

Fri Jul  7 19:17:20 UTC 2017 -

- enable sixaxis plugin

Sun Jun 25 11:53:02 UTC 2017 -

- Add %post/%postun to bluez-auto-enable-devices so the settings
  change takes effect (boo#1039476)

Thu Jun  8 06:54:26 UTC 2017 -

- add bluez-auto-enable-devices subpackage with main.conf which
  auto-enables all devices (boo#1039476)

Fri May 26 13:16:07 UTC 2017 -

- add bluez-5.45-disable-broken-tests.diff to disable two broken
  tests (reported upstream but not yet fixed)

Sat May  6 18:59:55 UTC 2017 -

- update to version 5.45:
  This is mostly a bugfix release with fixes in ATT, GATT, OBEX
  and AVDTP.
  Feature-wise there are some new things as well, such as btmon
  support decoding Bluetooth 5.0 HCI commands and events.

Fri Mar  3 09:16:29 UTC 2017 -

- make testsuite run non-parallel (it has problems with running
  parallel checks) and quiet

Wed Mar  1 21:22:42 UTC 2017 -

- update to version 5.44:
  Most fixes are LE (specifically GATT) related, however some other
  areas are affected as well.
  Feature-wise, there’s a new MIDI plugin and support for using
  single-mode (LE-only) controllers that lack a public address.
  E.g. any nRF5x controller running a MyNewt or Zephyr based
  firmware falls into this category.
- packaging: add "--enable-midi", "--enable-deprecated"
  TODO: package deprecated tools into separate package to prepare
  removal some time in the future
- rebase bluez-cups-libexec.patch

Wed Mar  1 11:39:56 UTC 2017 -

- Set the cupsdir directly with patch instead of mv and seds:
  * bluez-cups-libexec.patch
- Replace requirements by the pkgconfig counterparts
  * this should solve out the problem with builcycle on Factory
- Ran over with spec-cleaner

Sat Oct 29 09:23:59 UTC 2016 -

- update to version 5.43:
  This is almost purely a bug-fix release with fixes to HoG, ATT
  and PAN. There’s also a fix for a regression in 5.42 that caused
  connection failures for external profiles like OBEX.
  Feature-wise there’s one notable addition: LE privacy. By
  enabling this in main.conf it’s now possible to make BlueZ
  generate a local Identity Resolving Key (IRK) and use Resolvable
  Private Addresses (RPAs) for itself.

Mon Sep 26 17:41:20 UTC 2016 -

- update to version 5.42:
  The major API change with this release is that the GATT D-Bus API
  is no longer marked as experimental.This should hopefully
  encourage the creation of more applications using it. Feature-
  wise, btmon received support for decoding full mgmt message
  traces - a feature that is available in the bluetooth-next kernel
  tree, i.e. on its way to the 4.9 kernel release. In addition to
  these changes, this release contains also fixes in areas such as
  PBAP, transport selection (BR/EDR vs LE), ATT and A2DP.

Sun Jul 31 21:42:27 UTC 2016 -

- Update descriptions a bit. Adjust RPM groups for what is used
  in openSUSE normally. Drop archaic %clean section.
  Drop --with-pic which is only for (unbuilt) static libs.

Wed Jul 20 22:32:18 UTC 2016 -

- update to version 5.41:
  BlueZ 5.41 is purely a bug-fix release targeting areas such as
  GATT, AVRCP, OBEX and device discovery filters. The GATT D-Bus
  API is now starting to be stable enough that this will likely be
  the last release where it is flagged as experimental.
- fix build with older distributions that don't have %_userunitdir
  ins systemd-rpm-macros

Tue Jun  7 13:17:48 UTC 2016 -

- Don't require systemd-devel but systemd-rpm-macros (bsc#983167)
  Bluez simply needs to know where the systemd default paths are, at
  build time. For that there's no need to build-require systemd or
  systemd-devel (and pull all theirs dependencies). Instead
  build-require systemd-rpm-macros, which has much less dependencies.

Sat May 28 07:33:16 UTC 2016 -

- update to version 5.40:
  This is mostly a bug fix release fixing issues with GATT, paired
  devices and connection handling (particularly for accepting
  connections through the Profile D-Bus interface).
  One new feature is the ability to use btmon for reading HCI logs
  from a TTY device. Right now the creation of this kind of logs is
  available with Zephyr <> in the
  form of a special console logging mode (more information
  available here>).
  The format of the protocol is a slight modification of what btmon
  normally receives from the kernel monitor sockets, and is
  documented in doc/btsnoop.txt).

Sun Apr 10 09:37:14 UTC 2016 -

- update to version 5.39:
  This is almost entirely a bug fix release with important fixes to
- install gatttool, needed for bluetooth 4.0 devices (boo#970628)

Fri Mar 18 14:22:39 UTC 2016 -

- update to version 5.38:
  This release has lots of updates and fixes to the GATT D-Bus API.
  It should be working considerably better now. A key change to the
  GATT D-Bus API is that it is now fully conforming to the word of
  the D-Bus Object Manager specification. Instead of registering
  each service individually with an Object Manager interface per
  service path, all application services are now grouped together
  through a single RegisterApplication call. The details can be
  found in gatt-api.txt. Besides the D-Bus API change there are
  also numerous fixes to GATT functionality in general.
  Other areas that received fixes in this release are OBEX, AVRCP
  and 128-bit UUID handling. Feature-wise there isn’t anything
  groundbreaking, but a notable update is support for the Start
  Limited Discovery command in the btmgmt tool (this feature
  debuted with the 4.5 kernel release).
  * Fix issue with stack overflow and UUID handling.
  * Fix issue with ObjectManager interface and GATT.
  * Fix issue with GATT database and error handling.
  * Fix issue with GATT client notifications.
  * Fix issue with GATT object ordering.
  * Fix issue with GATT default MTU exchange.
  * Fix issue with device attribute clearing.
  * Fix issue with AVRCP capabilities request.

Mon Dec 28 08:27:37 UTC 2015 -

- update to version 5.37:
  * Fix issue with registering external profiles.
  * Fix issue with connecting external profiles.
  * Fix issue with GATT service changed handling.
  * Fix issue with not emitting GattServices update.
  * Convert to unified HID over GATT profile support.
  * Convert to KeyboardDisplay as default IO capability.
  * Install btattach utility by default.

Fri Oct 30 08:11:30 UTC 2015 -

- update to version 5.36:
  This release consists for the most part of bug fixes that target
  areas such as PBAP, AVRCP and GATT.
  Feature-wise a notable change is btmon support for vendor
  diagnostic messages which will be debuting with the 4.4 Linux
  kernel release. This feature will allow e.g. LMP tracing with
  specific controllers. For now there is preliminary support for
  Intel and Broadcom based controllers.
- update dbus-devel buildrequires from
- remove obsolete bluez-no-duplicate-test-names.patch

Mon Sep 28 19:02:15 UTC 2015 -

- update to version 5.35:
  This release contains bugfixes to areas such as GATT, OBEX, HoG
  and AVRCP. From now on bluetoothd will cache more information of
  remote GATT databases and thereby avoid unnecessary rediscovery
  of remote services.
  A noteworthy new feature is the ability to configure bluetoothd
  to automatically enable (power on) all new adapters. One use of
  this is to replace unreliable "hciconfig hci0 up" commands that
  some distributions use in their init/udev scripts. The feature
  can be enabled by having "AutoEnable=true" under the "[Policy]"
  section of /etc/bluetooth/main.conf

Thu Sep 10 13:24:58 UTC 2015 -

- Add bluez-no-duplicate-test-names.patch: Fix test suite when
  running against GLIB 2.45.x (test names are not to be used

Fri Sep  4 10:39:32 UTC 2015 -

- update to version 5.34:
  This release fixes a fairly important bug for the GATT D-Bus
  interface where automatic reconnections would not always occur
  for the client role. There’s also a fix for a missing attribute
  in PBAP & MAP SDP records as well as a couple of audio related
  fixes. A new feature in this release is Media Player Selection
  support for the Target role of AVRCP (the Controller role already
  had this).

Fri Jul 31 12:24:09 UTC 2015 -

- update to version 5.33:
  This release contains mostly bugfixes, particularly in areas such
  as the audio plugin, GATT and OBEX. The main feature additions
  are in the the emulator code which received improvelents to LE
  features. There’s also a new tool for testing the recently
  released Eddystone protocol from Google.

Tue Jul  7 21:22:05 UTC 2015 -

- update to version 5.32:
  This is mostly a bug fix release rather than including many new
  features. The fixes fall in several different areas, including
  OPP, ATT and advertising (instance number handling in
  particular). There’s also a fix for handling a sudden disconnect
  when a connection setup process hasn’t yet completed. The one
  notable feature this release has is the ability to select between
  letting the stack handle ATT security elevation or doing the
  respective error handling in higher layers.

Tue Jun 16 05:39:22 UTC 2015 -

- update to version 5.31
  Fixes to many different areas, including networking, GATT, HID,
  A2DP and AVRCP. Feature-wise we’ve got support for security flags
  for the GATT database, allowing fine-grained security level
  control for D-Bus clients using the GATT D-Bus API. We’ve also
  got a new experimental device discovery filter interface which
  allows filtering for a specific remote service, RSSI threshold
  or transport (LE vs. BR/EDR). Another new experimental interface
  is for LE advertising, which also brings the LE peripheral role
  closer to feature completion on a D-Bus level
- remove obsolete bluez-5.30-disable-broken-tests.diff

Wed Apr  1 10:35:59 UTC 2015 -

- update to version 5.30
  The highlight of this release is the completion of the GATT D-Bus
  APIs. We’ve now got both the client and server functionality in
  place, however it’s still behind the -E (--experimental) command
  line switch. The API is documented in doc/gatt-api.txt and there
  are several test tools for it in the tree (even bluetoothctl has
  support for it). Another new (and still experimental) D-Bus API
  that debuts with this release is one for managing LE Advertising,
  i.e. acting in peripheral role. The API is documented in
  Besides the new features, there are several fixes to AVCTP, AVDTP
  & AVRCP.  There’s also a fix for C++ compiler compatibility with
  the library headers as well as a fix for device information not
  being stored in certain corner cases.
- add bluez-5.30-disable-broken-tests.diff to fix test suite
- remove -fstack-reuse=none workaround
- remove 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch

Mon Mar 23 14:41:38 UTC 2015 -

- Build the testsuite with -fstack-reuse=none to workaround broken
  test setup.  [bnc#923768]

Thu Mar 12 12:03:30 UTC 2015 -

- update to version 5.29
  This is a comparatively large release with over a month and 475
  commits since 5.28. There have been lots of fixes to the Android
  side. Our internal GATT library (used both by ‘normal’ BlueZ as
  well as the Android version) received lots of updates for this
  release. Other notable changes are a fix for AVCTP key repeat
  timeout as well as added support for the Multi Profile
  Specification (MPS).
- add 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch
  from bluez-devel for fixing test case failure (will be included in
  next bluez release)

Tue Feb  3 10:45:20 UTC 2015 -

- update to version 5.28
  Here’s the first BlueZ release in 2015. Most of the changes since
  the last one are bug fixes, but there’s actually quite many of
  them this time, including:
  * Fixes to GATT service discovery & probing
  * Fix for bearer selection with dual-mode devices
  * Fix potential crash when removing devices
  * Fix issue with incomplete names in EIR data
  * Fix parsing GATT name characteristics
  * Fix AVCTP long press & key repetition handling
  * Fixes for GATT notification handling
  Besides bug fixes we’ve now also got more extensive unit tests
  for new GATT code as well as better HCI decoders in btmon for
  some less used 4.1 and 4.2 features. The hid2hci tool gained
  support for CSR 8510 A10 devices and the hex2hcd tool received a
  complete rewrite with better command handling.

Sat Dec 27 02:14:49 UTC 2014 -

- update to version 5.27
  Here comes the traditional x-mas release!
  BlueZ 5.27 consists mostly of bug fixes to areas such as GATT
  and mgmt (the interface through which bluetoothd talks to the
  kernel). The emulation framework has also received many new
  features, paving the way for more extensive test automation.

Sun Dec 14 21:56:58 UTC 2014 -

- update to version 5.26
  This release is for the most part a bug-fix release with fixes in
  A2DP and OBEX related functionality, but there’s also an added
  features for get/set reports for HID over GATT as well as
  Phonebook Access Profile 1.2 support
  The Bluetooth 4.2 specification went public in early December and
  BlueZ 5.26 is the first release with support for its features.
  Perhaps the most notable one of these is Low Energy Secure
  Connections which will require a 3.19 or newer kernel. This
  feature brings LE pairing to the same level of security as it has
  been for BR/EDR. LE SC also brings along with it so-called
  cross-transport pairing, which means that you only need to pair
  once over LE or BR/EDR to get the necessary keys for both
  transports between two dual-mode devices.

Mon Nov 10 08:22:31 UTC 2014 -

- update to version 5.25
  This release contains various improvements to MAP and PBAP
  support. There are also various GATT related fixes. We’ve also
  got a fix for a race condition which could occasionally cause LE
  connection/pairing failures. The fix will work for kernels from
  3.13 onward (for older kernels a proper fix isn’t really feasible).
- packaging: remove obsolete README.SUSE and README.packagers

Mon Oct  6 10:02:59 UTC 2014 -

- update to version 5.24
  This release consists for the most part of cleanups and minor
  fixes, however there are some new additions too in the form of
  Phonebook Access Profile 1.2 and Message Access Profile 1.2
- packaging: mcaptest tool added to bluez-test package

Tue Sep  9 06:28:53 UTC 2014 -

- update to version 5.23
  This is mostly a bug-fix release with fixes for concurrent
  authorization attempts (for untrusted devices), HID, uHID, OBEX,
  MAP and AVRCP. We now also have better support for AVCTP/AVRCP
  decoding with btmon.
  (no other packaging changes besides version bump)

Fri Aug  8 06:43:18 UTC 2014 -

- update to version 5.22
  This release contains several fixes to HID over GATT (HoG) as
  well as for AVRCP. Feature-wise there are a couple of notable
  additions debuting with the Linux kernel 3.17 release:
  * BR/EDR whitelist support. Starting with Linux kernel 3.17
    bluetoothd will no-longer set adapters to connectable by
    default. Instead, all configured remote devices are added to
    the kernel whitelist after which the kernel will enable page
    scanning but only accept connect requests from the whitelist.
    This effectively reduces the attack surface for unknown
    devices. When whitelist support is available the general
    connectable state now follows the discoverable state, meaning
    discoverable must be enabled for previously unknown devices to
    be able to connect to us.
  * Proper LE passive scanning support. For kernels before 3.17
    bluetoothd will use the Start/Stop Discovery commands to
    perform LE background scanning. This however uses LE active
    scanning which is both wasteful (causing unneeded Scan
    Requests) and can cause reconnection issues with devices using
    direct advertising (e.g. most LE mice). From kernel version
    3.17 onward bluetoothd will use proper kernel-side passive
    scanning, making the background scanning both efficient and
    more interoperable. The kernel will even use the
    controller-side whitelist during scanning (if no Resolvable
    Private Addresses are present), saving even more power.

Sun Jul  6 11:47:10 UTC 2014 -

- update to version 5.21
  Bugfixes and improvements throughout the tree. Fixes to
  bluetoothctl to allow using it for scripting.
  An important detail of this release is that it supports several
  new features that are on their way to the 3.17 kernel. Perhaps
  the most important one of these is LE passive scanning. When
  run on a kernel that supports it, instead of doing a kind of
  "fake" background scanning using the Start Discovery command,
  bluetoothd will now tell the kernel the relevant information and
  the kernel will then commence passive scanning for devices.
- remove bluez-5.20-fix-queue.patch (fixed upstream)

Fri Jun 27 10:56:22 UTC 2014 -

- add bluez-5.20-fix-queue.patch to fix test case failure

Sat Jun 21 21:30:12 UTC 2014 -

- update to version 5.20
  For non-Android related parts this is mostly a bug-fix release
  with minor fixes here and there as well as improved handling of
  PS3 controllers.

Tue May 20 06:24:05 UTC 2014 -

- update to version 5.19
  The release contains fixes to OBEX, AVRCP browsing, HID over GATT
  and handling of device unpaired events for dual-mode devices.
  There is also a fix to cleanly handle tools like bluetoothctl
  taking over the default agent role. Since there is no indication
  to the "normal" system default agent this would previously simply
  rob this property away without any way to know that this
  happened. From 5.19 onward bluetoothd maintains a stack of agents
  that have requested to be the default and will hand back the
  property to the next item in the stack when bluetoothctl (or some
  other tool) exits.
  Besides these fixes we’ve got some new additions too:
  * User space based HID host implementation (for BR/EDR), to
    complement the kernel-side implementation
  * A reconnect-upon-linkloss policy for those profiles that need,
    such as HFP HF or an A2DP Sink. The list of remote UUIDs to try
    to reconnect to is also configurable through main.conf.
- removed bluez-glib2.40.patch, included upstream

Tue Apr 29 18:16:11 UTC 2014 -

- Add bluez-glib2.40.patch: Fix build with GLib 2.40: Since GLib
  2.39 calling g_source_remove on already removed source is causing
  critical warning.

Sun Apr 13 10:46:02 UTC 2014 -

- update to version 5.18
  "This is mostly a bug fix release with issues fixed regarding LE
   single mode device detection and incorrect getpeername() calls
   which could have caused incorrect SDP records for profiles
   (mainly those using the Profile D-Bus interface with RFCOMM
   channel auto-allocation).
   On the OBEX side we now have full OBEX authentication support,
   which is a fairly useless feature in practice but a mandatory
   one for qualification of some OBEX profiles."

Wed Mar 26 12:51:17 UTC 2014 -

- update to version 5.17
  "This is mostly a bug fix release with issues fixed in OBEX,
   dual-mode device pairing, and LE related areas."
  * Fix issue with not resetting OBEX SRM setup.
  * Fix issue with BR/EDR devices and auto-connect list.
  * Fix issue with bonding complete detection as peripheral.
  * Fix issue with not updating bearer timestamp of connections.
  * Fix issue with paired property for multiple bearers.

Tue Mar 11 22:24:22 UTC 2014 -

- update to version 5.16:
  * Fix issue with missing paired property notification.
  * Fix issue with endianess of long term key storage.
  "People using 5.15 are strongly recommended to upgrade because
   of these fixes."
  * Fix issue with HID over GATT physical location.
  * Fix issue with HID over GATT unique identifier.
  * Add support for storing signature resolving keys.

Sat Feb 22 10:31:52 UTC 2014 -

- update to version 5.15:
  * Fix issue with LE enabling and background scanning.
  * Fix issue with HID over GATT input device name.
  * Fix issue with storage of slave long term keys.
  * Add support for handling identity resolving keys.
  * various android features (not relevant for us)
- minor specfile tweaks to avoid some rpmlint warnings
- permissions of some bluez-test files changes to please rpmlint

Thu Jan 23 10:43:53 UTC 2014 -

- Update to version 5.14:
  * Fix issue with marking PS3 controllers as trusted.
  * Fix issue with authorization of PS3 controllers.
  * Add support for DualShock 4 controller detection.
  * Add support for legacy pairing emulation.
  * Add support for secure simple pairing emulation.
  * Add support for automated pairing testing.
  * Add support for RFCOMM protocol testing.
  * Add support for HCI controller testing.
- Add "bluemoon" configuration tool

Mon Dec 30 15:46:01 UTC 2013 -

- Update to version 5.13:
  * Fix issue with PS3 controller detection.
  * Add support for data transfers to L2CAP testing tool.
  * Add support for delay reporting to AVDTP testing tool.
  * Add support for Android Bluetooth Core interface.
  * Add support for Android Bluetooth Socket interface.
  * Add support for Android Bluetooth HID Host interface.
  * Add support for Android Bluetooth PAN interface.
Changes since 5.12:
  * Fix issue with missing reply to DisconnectProfile.
  * Fix issue with icon property and class of device changes.
  * Fix issue with HID devices when SDP record is not available.
  * Fix issue with handling auto-pairing of printers.
  * Fix issue with agent authorization handling.
  * Add support for PS3 controller setup and pairing.
  * Add support for LE L2CAP CoC test capabilities.
  * Add support for AVDTP qualification test cases.
  * Add support for SMP cryptographic test cases.

Wed Dec  4 13:44:23 UTC 2013 -

- add bluez-5.11-logitech-hid2hci.patch, (bnc#681049; bnc#850478)

Sun Nov 24 16:43:28 UTC 2013 -

- run %uev_rules_update in %post if such macro is defined

Mon Nov 18 08:11:54 UTC 2013 -

- update to bluez-5.11:
  * Fix issue with connection attempt when not powered.
  * Fix issue with assigning player to AVRCP target role.
  * Fix issue with OBEX default cache directory.
  * Fix issue with SDP search error handling.
  * Fix issue with processing of SDP records.
  * Fix issue with HID to HCI switching utility.
  * Fix issue with mgmt end-to-end testing tool.
  * Fix issue with L2CAP end-to-end testing tool.
  * Add support for SMP end-to-end testing tool.
  * Add support for more Wii controllers.

Sat Oct 19 08:36:07 UTC 2013 -

- remove libnl BuildRequires, it is not needed

Wed Oct 16 14:31:38 UTC 2013 -

- update to bluez-5.10, changelog from source:
  ver 5.10:
  * Fix issue with discoverable timeout handling.
  * Fix issue with MAP messages and record version.
  * Fix issue with MAP messages and status events.
  * Fix issue with MAP messages and relative folders.
  * Fix issue with MAP messages and type property signals.
  * Fix issue with transfer size for OBEX GET operations.
  * Fix issue with AVRCP service class identifier.
  * Fix issue with AVRCP tracking seeked signal.
  * Add support for OBEX command line client.
  ver 5.9:
  * Fix issue with network service and adapter removal.
  * Fix issue with misleading OBEX error messages.
  * Fix issue with OBEX transport reference handling.
  * Fix issue with memory leak with MAP event handler.
  * Fix issue with missing MAP property changed signal.
  * Fix issue with message type property values.
  * Fix issue with empty UUID list for devices.
  * Fix issue with profile agent cancel method.
  * Remove dependency on USB library.
- removed bluez-5.4-compilerwarning.diff, is obsolete

Tue Oct  8 08:24:15 UTC 2013 -

- Do not package systemd user session service file.
- Change DBus user service to be self-contained, and not rely on
  Systemd activation (bnc#842688).

Sat Sep 14 08:01:17 UTC 2013 -

- place socket in /run , not /var/run (bluez-sdp-unix-path.patch)

Fri Aug 16 18:43:49 UTC 2013 -

- update to bluez-5.8
  * changelog is in the package

Thu Aug 15 06:36:45 UTC 2013 -

- update to bluez-5.4
  Huge, incompatible update. Some points:
  * hcidump merged
  * obexd merged
  * no unix socket anymore (only d-bus)
  * libbluetooth and bluez-devel is *deprecated* and will be
    removed. Only included for now to keep the breakage smaller.
- dropped patches (no longer needed):
  * 0001-network-fix-network-Connect-method-parameters.patch
  * bluez-4.101-new-automake.diff
- new patch to suppress a stupid compiler warning:
  * bluez-5.4-compilerwarning.diff

Wed Aug 14 14:00:39 UTC 2013 -

- Disable check when building with qemu (fix armv6)

Thu Mar 21 08:07:45 UTC 2013 -

- Added url as source.
  Please see

Thu Feb 28 14:45:10 UTC 2013 -

- add bluez-4.101-new-automake.diff, fix build with automake-1.13.1

Fri Jan 25 08:05:27 UTC 2013 -

- also run spec-cleaner on bluez-gstreamer.spec, add README for
  packagers, fix bluez-gstreamer changelog

Mon Jan 21 11:16:34 UTC 2013 -

- Unconditionally enable the systemd bluetooth service (actual
  activation of bluez is triggered by udev) (bnc#796671).
- Run spec-cleaner.

Fri Jan 11 14:38:03 UTC 2013 -

- Add changelog entry for older change so factory-auto wont reject this.
- This requests removes sbc building and packaging from bluez.
SBC recently gets its own package and sources are even stripped out ot
Bluez in current git master (future 5.0).
On top of that current bluez-devel package conflicts with sbc-devel.
Note: This change may broke packages which use sbc from bluez-devel
as new sbc-devel package use different include path.
This change is required to properly build PulseAudio 3.0

Wed Oct 31 14:50:01 UTC 2012 -

- bluez-coldplug init script is forced but it s not needed
  when using systemd with dbus activation.

Wed Oct 17 11:44:49 UTC 2012 -

- remove unused 001-remove-rule-dell-mouse.patch

Wed Oct 17 09:18:47 UTC 2012 -

- Fix build with new systemd / udev location.

Wed Oct 17 08:52:03 UTC 2012 -

- Change udev rules location with udev > 190

Tue Aug 28 09:37:12 UTC 2012 -

- enable bluetooth.service on install (bnc#772455)

Sat Jul 28 13:00:59 UTC 2012 -

- remove unused service file (now in upstream tarball)

Fri Jul 20 14:58:35 UTC 2012 -

- add patch from upstream git to fix bluez networking

Wed Jul 11 14:04:54 UTC 2012 -

- remove unused, bluez-4.75-udev-use-helperscript.diff

Wed Jun 27 20:39:52 UTC 2012 -

- ver 4.101:
  - Fix issue with missing BlueZ service file.
  - Fix issue with aborting A2DP setup during AVDTP start.
  - Fix issue with handling of multiple A2DP indication.
  - Fix issue with handling AVDTP abort with invalid SEID.
  - Fix issue with rejecting AVDTP abort commands.
  - Add support for handling AVDTP command collision.
- our bluez-4.100 patches are applied upstream
- apitest was removed and is thus no longer in bluez-test

Thu Jun 21 08:57:47 UTC 2012 -

- remove obsolete configure options
- fix LDFLAGS / "-pie" acinclude.m4 bug

Wed Jun 20 11:17:53 UTC 2012 -

- update to bluez-4.100:
  * Fix issue with crashing when SCO connection fails.
  * Fix issue with HFP gateway failing on first GSM connection.
  * Fix issue with AVRCP and handling of vendor commands.
  * Fix issue with handling AVRCP subunit info command.
  * Fix issue with missing capability for AVRCP track reached end.
  * Fix issue with AVDTP signaling and GStreamer SBC NULL check.
  * Fix issue with AVDTP Reconfigure Reject message.
  * Fix issue with incorrect EIR length parsing.
  * Fix issue with SDP disconnect for HIDSDPDisable.
  * Fix issue with SDP interoperability with Mac OS X Lion.
  * Fix issue with reverse SDP discovery with some devices.
  * Fix issue with discovering state during power off operation.
  * Add support for AVRCP Volume Changed notifications.
  * Add support for AVRCP Set Absolute Volume handling.
  * Add support for display legacy PIN code agent method.
  * Add support for multiple media transports per endpoint.
  * Add support for discovering device information characteristics.
  * Add support for vendor source for Device ID setting.
  * Add support for immediate alert server.
  * Add support for link loss server.
- Notes:
  * This version requires D-Bus 1.4 or later.
  * This version requires GLib 2.28 or later.

Thu Apr 26 15:04:58 UTC 2012 -

- fix mysterious build failure by creating /var/lib/bluetooth

Wed Apr 18 22:09:48 UTC 2012 -

- Make libsbc installable; Required by update to Opal.

Thu Mar  8 21:06:29 UTC 2012 -

- update to bluez-4.99:
  - Fix issue with missing retries for BNEP connection setup.
  - Fix issue with not showing name if first EIR has no details.
  - Fix issue with running SDP discovery for LE devices.
  - Add support for GATT using 128-bit Bluetooth UUIDs.
  - Add support for retrieving key size information.
  - Add support for storing Long Term Keys.
  - Add support for Proximity Reporter API.
  - Add support for KeyboardDisplay IO capability.
  - Add support for version 1.0 of management API.
  - Add support for monitoring interface.

Mon Jan 23 15:23:43 UTC 2012 -

- update to bluez-4.98:
  - Fix issue with adapter list upon initialization failure.
  - Fix issue with missing legacy property for Low Energy.
  - Fix issue with missing EIR information handling.
  - Fix issue with device address type tracking.
  - Fix issue with alert level characteristic.
  - Fix issue with headset shutdown handling.
  - Fix issue with Wiimote address handling.
  - Add support for advanced l2test options.
  - Add support for attribute protocol and multiple adapters.

Tue Dec 27 11:01:18 UTC 2011 -

- update to bluez-4.97:
  - Update support for proximity profile.
  - Fix issue with SBC audio decoding quality.
  - Fix multiple issues with HFP support.
  - Fix multiple issues with A2DP support.
  - Fix multiple issues with AVDTP support.
  - Fix multiple issues with AVRCP support.
  - Add support for AVRCP meta-data transfer.
  - Add support for Bluetooth based thermometers.
- add %check section to .spec - there is now a unittest

Tue Dec 20 19:46:07 UTC 2011 -

- currently lacks of bluez tarballs
- Fix build failures due to lack of autotools

Fri Dec 16 03:22:40 UTC 2011 -

- Fix systemd units installation.

Wed Nov 16 11:29:07 UTC 2011 -

- require pkgconfig(libnl-1) instead of libnl-1_1-devel

Fri Sep 16 12:02:37 UTC 2011 -

- Select libnl-1_1-devel
- Fix baselibs.conf to produce right package

Thu Aug  4 18:51:02 UTC 2011 -

- update to bluez-4.96:
  - Fix issue with race condition in AVDTP stream start.
  - Fix issue with global adapter offline switching.
  - Fix issue with pairing and No Bonding devices.
  - Add support for Nintendo Wii Remote pairing.
- enable proximity, wiimote, thermometer plugins

Tue Jul  5 07:29:57 UTC 2011 -

- update to bluez-4.95:
  - Fix issue with AVCTP replies with invalid PID.
  - Fix issue with AVRCP and unknown packet types.
  - Fix issue with AVRCP not using NOT_IMPLEMENTED correctly.
  - Fix issue with AVDTP discovery if all endpoints are in use.
  - Fix issue with invalid memory writes and media support.
  - Fix issue with not removing device alias and unbonding.
  - Fix issue with device disconnects and offline mode handling.
  - Add support for setting adapter name based on machine-info.
  - Add support for systemd service configuration.
- add systemd .service file (systemd support needs more work still)

Wed Jun 22 16:02:15 CEST 2011 -

- added baselibs.conf bnc#700840

Tue Jun 14 06:49:35 UTC 2011 -

- remove workaround for rpmlint stupidity now that libusb is in /

Wed Jun  1 09:46:16 UTC 2011 -

- update to bluez-4.94:
  - Fix issue with invalid read of memory in various modules.
  - Fix issue with buffer overflow when sending AVDTP commands.
  - Fix issue with response to vendor dependent AVRCP commands.
  - Fix issue with headset when not able to reply with ERROR.
  - Fix issue with crash when creating a device from storage.
  - Fix issue with handling non UTF-8 devices names.
  - Add support for improved discovery procedure.

Wed May  4 20:39:21 UTC 2011 -

- update to bluez-4.93:
  - Fix issue with property type and Health Main channel.
  - Fix issue with crash when removing devices.
  - Add support for hid2hci and udev integration.
- disable 001-remove-rule-dell-mouse.patch for now

Tue Apr 26 07:48:45 UTC 2011 -

- update to bluez-4.92:
  - Fix issue with handling of A2DP suspend response.
  - Fix issue with crashing when acquiring A2DP stream.
  - Fix issue with missing check for valid SCO before shutdown.
  - Fix issue with waiting for POLLERR when disconnecting SCO.
  - Fix issue with disconnect after primary service discovery.
  - Fix issue with attribute interface registration.
  - Add support for primary services over BR/EDR.
  - Add support for flushable packets of A2DP media.

Wed Mar 30 07:12:13 UTC 2011 -

- update to bluez-4.91:
  - Fix issue with LMP version string and hciconfig.
  - Fix issue with missing discovery signal when scanning.
  - Fix issue with wrong state and canceling name resolving.
  - Fix issue with missing check during adapter initialization.
  - Fix issue with missing protocol not supported error and A2DP.
  - Fix issue with crash during driver unregistering and A2DP.
  - Fix issue with crash when receiving AVDTP close command.
  - Fix issue with remote SEP handling when A2DP codec changes.
  - Fix issue with SCO hangup handling and state changes.
  - Fix issue with security level and MCAP instances.
  - Fix issue with memory leak and HDP data channels.
  - Add support for discover characteristics by UUID to gatttool.
  - Add initial support for Out-of-Band association model.
  - Add initial support for SIM Access Profile.

Fri Mar 18 10:23:18 UTC 2011 -

- update to bluez-4.90:
  - Fix issue with setting of global mode property.
  - Fix issue with handling of RequestSession responses.
  - Fix issue with TP_BNEP_CTRL_BV_01_C qualification test.
  - Fix issue with too short AVDTP request timeout.
  - Add support for SIM Access Profile manager.
  - Add support for new UUID utility functions.
  - Add support for attribute server notifications.
  - Add support for client characteristic configuration.
  - Update support for interactive GATT utility.

Mon Feb 21 07:56:00 UTC 2011 -

- update to bluez-4.89:
  - Fix issue with name resolving when discovery is suspended.
  - Fix issue with parsing flags of advertising report.
  - Fix issue with SEP handling if interface is disabled.
  - Fix issue with device object creation on disconnect event.
  - Fix issue with indicators whenever the driver is initialized.
  - Fix issue with call indicator when parsing call info reply.
  - Fix issue with crash and allowed GATT MTU was too large.
  - Add support for SDP record of Primary GATT services.
  - Add support for interactive mode for GATT utility.
- gattool requires libreadline for its interactive mode now, so
  add readline-devel to BuildRequires

Mon Feb 14 09:48:26 UTC 2011 -

- update to bluez-4.88:
  - Fix issue with HID channel reference count handling.
  - Fix issue with daemon exit on badly formatted AT+VTS.
  - Fix issue with crash while parsing of endpoint properties.
  - Fix issue with possible crash on AVDTP Suspend request timeout.
  - Fix issue with stopping inquiry before adapter is initialized.
  - Fix issue with creating device object when connection fails.
  - Fix issue with sending HCIDEVUP when adapter is already up.
  - Fix issue with handling bonding IO channel closing.
  - Fix agent cancellation in security mode 3 situations.
  - Update pairing code to support management interface.
- requires glib2 2.16 or newer

Wed Jan 26 12:43:23 UTC 2011 -

- update to bluez-4.87
  - Fix issue with initialization when adapter is already up.
  - Fix issue with attribute server MTU and incoming connections.
  - Fix issue with duplicate characteristics after discovery.

Thu Jan 20 13:41:53 UTC 2011 -

- update to bluez-4.86:
  -  Revert wrong fix for SDP PDU size error response.
  -  Fix various memory leaks in A2DP and AVDTP support.
  -  Add Routing property to MediaTransport interface
  -  Add proper tracking mechanism to NREC status.
  -  Add READ_BLOB_REQUEST support to attribute server.

Tue Jan 11 19:47:49 UTC 2011 -

- update to bluez-4.85:
  - Fix issue with event mask setting for older adapters.
  - Fix issue with device creation and pairing failures.
  - Add support for telephony support via oFono.
  - Add support for characteristic security level.
  - Update support for service registration.

Tue Dec 28 22:11:32 UTC 2010 -

- update to bluez-4.84:
  - Fix issue with wrong parameters and device found signals.
  - Fix issue with leaking EIR data if RSSI does not change.
  - Fix issue with adapter initialization state.
  - Fix issue with closing of SDP server sockets.

Mon Dec 27 00:09:46 UTC 2010 -

- update to bluez-4.83:
  - Fix issue with already connected HFP/HSP endpoints.
  - Fix missing reply when create device is canceled.
  - Fix memory leak within the attribute server.
  - Fix memory leak with unused extended inquiry name.
  - Fix setting paired state when device->authr is false.
  - Fix clearing authentication request for renewed keys.
  - Add support for storing link keys in runtime memory.
  - Update support for primary service discovery.

Sat Dec 18 21:57:40 UTC 2010 -

- update to bluez-4.82:
  - Fix crash with mmap of files with multiples of page size.
  - Fix HFP response and hold (AT+BTRH) command response.
  - Fix device creation error response when powered off.
  - Fix device removal when connecting/browsing fails.
  - Add initial attribute permission implementation.
  - Add AVDTP SRC stream send buffer size verification.
  - Add support for setting link policy based on features.

Tue Nov 30 21:52:31 UTC 2010 -

- update to bluez-4.81:
  - Fix issue with telephony driver initialization.
  - Fix issue with adapter services list initialization.
  - Fix crash after simultaneous authentication requests.
  - Add support for primary service search on device creation.

Sun Nov 21 22:28:54 UTC 2010 -

- update to bluez-4.80:
  - Fix legacy link key storing for some buggy adapters.
  - Fix invalid memory access when EIR field length is zero.
  - Fix adapter initialization to wait for kernel HCI commands.
  - Fix initialization of adapters which are already up.
  - Fix possible race condition when initializing adapters.
  - Fix possible crashes when attempting to connect AVDTP.
  - Fix not aborting sink stream configuration on disconnect.
  - Fix not indicating disconnected state when connecting to AVDTP.
  - Fix not dropping AVDTP session when canceling stream setup.
  - Fix AVDTP abort not being send when the state is idle.
  - Fix regression with Low Energy and interleave discovery.
  - Add a new configuration option to disable Low Energy support.
  - Update support for GATT Primary Service Discovery.
  - Update MCAP and HDP support.
- disable silent buildrules

Tue Nov  9 21:36:56 UTC 2010 -

- update to bluez-4.79:
  - Fix issue with adapter initialization race condition.
  - Update new Bluetooth Management interface support.

Mon Nov  8 09:32:16 UTC 2010 -

- patch to current git to fix race condition in hciops causing
  adapter detection to fail

Sun Nov  7 09:32:52 UTC 2010 -

- update to bluez-4.78:
  - Fix various issues with AVDTP timer handling.
  - Fix various issues with handling of mode changes.
  - Fix issue with audio disconnect watch in connecting state.
  - Fix issue with handling call waiting indicators in telephony.
  - Fix issue with handling UUID parameter and RegisterEndpoint.
  - Add initial support for Bluetooth Management interface.
  - Add support for Application property to HealthChannel.

Sun Oct 31 12:37:02 UTC 2010 -

- Use %_smp_mflags

Wed Oct 27 07:31:04 UTC 2010 -

- update to bluez-4.77:
  - Fix issue with device name and accessing already freed memory.
  - Fix issue with handling CHLD=0 command for handsfree.
  - Fix issue with manager properties and no adapters.
  - Fix issue with properties and broken service records.
  - Fix issue with A2DP playback and sample rate changes.
  - Update MCAP and HDP support.

Fri Oct 15 18:21:57 UTC 2010 -

- update to bluez-4.76:
  - Fix issue in telephony driver with hanging up held call.
  - Fix issue in telephony driver with notifications when on hold.
  - Fix issue with blocking on setconf confirmation callback.
  - Fix issue with not always signaling new streams as sinks.
  - Fix issue with errors in case of endpoint request timeout.
  - Fix issue with HFP/HSP microphone and speaker gain values.
  - Add source if the device attempt to configure local sink stream.
  - Add PSM option for GATT/ATT over BR/EDR on gatttool.
  - Add support for GATT/ATT Attribute Write Request.
  - Update MCAP and HDP support.

Tue Oct  5 16:38:28 UTC 2010 -

- de-fuzz udev rule patch

Tue Oct  5 16:23:33 UTC 2010 -

- update to bluez-4.75:
  - Fix use of uninitialized variable on legacy pairing.
  - Fix mismatch of attribute protocol opcode.
- bluez-4.74:
  - Fix regression for Legacy Pairing.
  - Fix wrong PSM value for attribute protocol.
  - Fix issue with RSSI field in advertising reports.
  - Add support for Add BR/EDR and LE interleaved discovery.
  - Add support for GATT write characteristic value option.
  - Add support for specifying download address for AR300x.
- bluez-4.73:
  - Fix problem with EIR data when setting the name.
  - Fix reading local name from command complete event.
  - Fix registering local endpoints with disabled socket interface.
  - Add support for more HCI operations using ops infrastructure.
  - Add support for GATT characteristic hierarchy.
  - Add support for GATT indications.

Sat Sep 25 18:15:38 UTC 2010 -

- disable libcap-ng for < 11.3, it is not available there
- fix up bluez-gstreamer.spec to build with the same options as

Thu Sep 23 18:00:27 UTC 2010 -

- enable libcap-ng support so the deamon can drop root

Wed Sep 22 13:18:14 UTC 2010 -

- update to bluez-4.72:
  - Fix memory leak while connecting BTIO channels.
  - Fix crash with GStreamer plugin if SBC is not supported.
  - Fix issue with GATT server stop sending notifications.
  - Fix issue with GATT and dealing with the minimum MTU size.
  - Fix issue with file descriptor leak in GATT client.
  - Add support for UUID 128-bit handling in attribute client.
  - Add support for encoders/decoders for MTU Exchange.
  - Add support for the MTU Exchange procedure to the server.
  - Add support for a per channel MTU to the ATT server.
  - Add support for Characteristic interface.
  - Add support for new Media API and framework.
  - Add initial support for HDP plugin.

Thu Sep  9 20:17:38 UTC 2010 -

- update to bluez-4.71:
  - Fix crash with RequestSession and application disconnects.
  - Fix memory leak and possible crash when removing audio device.
  - Fix issue with closing stream of locked sep when reconfiguring.
  - Fix issue where discovery could interfere with bonding.
  - Fix issue with Connected status when PS3 BD remote connects.
  - Fix issue with lifetime of fake input devices.
  - Add support for compile time option of oui.txt path.
  - Add support for printing IEEE1284 device ID for CUPS.
  - Add plugin for setting adapter class via DMI.
  - Add more features for attribute protocol and profile.
  - Add initial support for MCAP.

Thu Aug 26 07:31:32 UTC 2010 -

- update to bluez-4.70:
  - Fix incoming call indication handling when in WAITING state.
  - Fix various SDP related qualification test case issues.
  - Fix logic to write EIR when SDP records are changed.
  - Fix UTF-8 validity check for remote names in EIR.
  - Add support for UUID-128 extended inquiry response.
  - Add service UUIDs from EIR to the DeviceFound signal.
  - Add fast connectable feature for Handsfree profile.
  - Add HCI command and event definitions for AMP support.
  - Add firmware download support for Qualcommh devices.
  - Add host level support for Atheros AR300x device.
  - Add initial support of ATT and GATT for basic rate.
- ALSA config file moved from /etc/alsa/ to /usr/share/alsa/

Wed Jul 14 06:14:38 UTC 2010 -

- update to bluez-4.69:
  - Fix issue with calling g_option_context_free() twice.
  - Fix inconsistencies with initial LE commands and events.
  - Add support for telephony ClearLastNumber method.
  - Add support for network server interface.

Tue Jul 13 08:12:57 UTC 2010 -

- fix instant segfault of bluetoothd (upstream commit

Tue Jul 13 06:19:00 UTC 2010 -

- update to bluez-4.68:
  - Fix initialization of adapters in RAW mode.
  - Add initial set of LE commands and events definitions.
  - Add mode option for L2CAP sockets to the BtIO API.

Sat Jul  3 14:59:44 UTC 2010 -

- update to bluez-4.67:
  - Fix issue with authentication reply when bonding already completed.
  - Fix issue with not canceling authentication when bonding fails.
  - Fix issue with changed combination keys and temporary storage.
  - Fix issue with sdp_get_supp_feat library function.
  - Fix issue with missing unblock on device removal.
  - Fix issue with not waiting for mode change completion.
  - Add ARMv6 optimized version of analysis filter for SBC encoder.

Sun Jun 13 09:27:22 UTC 2010 -

- update to bluez-4.66:
  - Fix regression with full debug enabling via SIGUSR2.
  - Fix redundant speaker/microphone gains being sent.
  - Fix not emitting PropertyChanged for SpeakerGain/MicrophoneGain.
  - Fix issue with storage usage when a record is not found in memory.
  - Fix issue with DiscoverServices not retrieving any records.
  - Fix audio profile disconnection order to match whitepaper.
  - Fix auto-accept confirmation when local agent has NoInputNoOutput.
  - Fix remote just-works SSP when MITM protection is required.
  - Fix performing dedicated bonding without MITM requirement.
  - Add support for storing debug link keys in runtime memory.

Mon May 24 20:22:03 UTC 2010 -

- update to bluez-4.65:
  - Fix issues with general bonding being default setting now.
  - Fix driver removal upon device removal.
  - Add new "Blocked" property to device objects.
  - Add hciconfig support for blacklisting.
  - Add support for dynamic debug feature.

Wed May  5 10:55:39 UTC 2010 -

- fix coldplug script for udev > 151 (bnc#602773)

Thu Apr 29 09:58:04 UTC 2010 -

- update to bluez-4.64:
  - Fix invalid memory access in headset_get_nrec function.
  - Fix issue with disconnect event on higher protocol layers.
  - Fix issue with list parsing in sdp_set_supp_features function.
  - Fix device object reference counting for SDP browse requests.
  - Add missing memory checks whenever memory is allocated for SDP.
  - Add support for exporting local services via D-Bus.
  - Add more L2CAP Enhanced Retransmission test options.
- remove unused "--enable-manpages" configure option

Wed Apr 14 15:32:51 CEST 2010 -

- In openSUSE 11.3 there is upstream compliant CUPS 1.4
  which means to have a fixed "/usr/lib/cups/" directory
  on all platforms (see Novell/Suse Bugzilla bnc#575544).

Fri Mar 26 07:20:13 UTC 2010 -

- update to bluez-4.63:
  - Fix avdtp_abort not canceling pending requests.
  - Fix stale connection when abort gets rejected.

Sun Mar  7 22:32:11 UTC 2010 -

- update to bluez-4.62:
  - Fix accidental symbol breakage with inquiry transmit power.
  - Fix using invalid data from previous headset connection.
  - Fix double free on AVDTP Abort response.
  - Fix possible crash while verifying AVDTP version.
  - Fix missing inuse flag when AVDTP stream is configured.
  - Add support for Bluetooth controller types.

Sat Feb 13 22:38:31 UTC 2010 -

- update to bluez-4.61:
  - Fix issues with Read Inquiry Response Transmit Power Level.
  - Fix possible invalid read when removing a temporary device.
  - Fix mode restoration when remember_powered is false.
  - Fix conference call releasing in telephony-maemo.
  - Fix segmentation fault with authorization during headset disconnects.
  - Add support for handling unanswered AVDTP request on disconnect.
  - Add support for handling Inquiry Response Transmit Power Level.
  - Add support for caching of remote host features.
  - Add preliminary voice dialing support for HSP.

Mon Jan 11 09:47:47 UTC 2010 -

- update to bluez-4.60:
  * Fix voice mailbox number reading from SIM.
  * Fix some races with D-Bus mainloop integration.
  * Add helpers for D-Bus signal watches.

Tue Dec 29 10:14:59 UTC 2009 -

- update to bluez-4.59:
  - Add values for Bluetooth 4.0 specification.
  - Add SDP functions for HDP support.
  - Add test scripts for input and audio.
  - Fix missing close on BtIO create_io function.
  - Fix sending incorrect AVDTP commands after timeout occurs.
  - Fix timer removal when device disconnects unexpectedly.
  - Fix Extended Inquiry Response record for Device ID.
- silence rpmlint warning on bluez-coldplug init script

Mon Nov 16 09:02:00 CET 2009 -

- update to bluez-4.58:
  - Fix crash when adapter agent exists during authentication.
  - Fix CK-20W quirks for play and pause events.

Mon Nov  2 21:51:12 CET 2009 -

- update to bluez-4.57:
  - Fix unloading of drivers for uninitialized adapters.
  - Fix debug message to use requested and not opened SEID.
  - Fix codec selection for GStreamer plugin.
  - Fix deleting of SDP records during service updates.
  - Fix deleting of SDP records when a device is removed.
  - Fix handling when the SDP record is modified on remote device.
  - Fix potential buffer overflow by using snprintf instead of sprintf.
  - Fix const declarations for some storage function parameters.

Mon Oct 19 10:39:02 CEST 2009 -

- 001-remove-rule-dell-mouse.patch added to disable udev action
  for dell mouse; bnc#522287

Sat Oct 10 23:26:37 CEST 2009 -

- update to bluez-4.56:
  - Add missing values from Bluetooth 3.0 specification.
  - Add proper tracking of device paired status.
  - Fix tracking of devices without permanently stored link key.
  - Fix issue with link key removal after connection failures.
  - Fix legacy pairing information based on remote host features.
  - Fix off-by-one issue with AVDTP capability parsing.
  - Fix AVRCP, AVCTP, AVDTP, A2DP and HFP version numbers.
  - Fix agent canceling before calling agent_destroy.
  - Fix service record parsing with an empty UUID list.
  - Fix various SDP related memory leaks.

Sun Oct  4 22:06:46 CEST 2009 -

- fix reading of config file in udev helper script
- update to bluez-4.55:
  - Add support for POSIX capabilities dropping.
  - Add special quirk for the Nokia CK-20W car kit.
  - Fix error code handling for AVDTP SetConfiguration response.
  - Fix updating out of range list when RSSI hasn't changed.
  - Fix various memory leaks and unnecessary error checks.
  ver 4.54:
  - Add introspection interface to output of introspection calls.
  - Fix stream handling when media transport disconnects prematurely.
  - Fix command timeout handling when there's no stream.
  - Fix headset_suspend_stream behavior for invalid states
  - Fix issue with AVDTP ABORTING state transition.
  - Fix issue with AVDTP suspend while closing.
  ver 4.53:
  - Fix issue with telephony connection state notifications.
  - Fix AVDTP stream leak for invalid media transport config.
  - Fix audio connection authorization handling with timeouts.
  - Fix race condition in authorizing audio connections.
  - Fix device authorized setting for AVRCP-only connections.
  - Fix duplicate attempts from device to connect signal channel.
  ver 4.52:
  - Add AVCTP support to test utility.
  - Fix AVDTP Abort when transport closes before response.
  - Fix authorization when the audio profiles are slow to connect.
  - Fix potential AVDTP reference leaks.

Thu Sep  3 14:38:59 CEST 2009 -

- update to bluez-4.51:
  - Add utility for basic AVDTP testing.
  - Add support for configuring L2CAP FCS option.
  - Fix discovery mode for CUPS 1.4.x and later.
  - Fix global state tracking of audio service.
  - Fix last issues with the new build system.

Tue Aug 25 07:35:04 CEST 2009 -

- update to bluez-4.50:
  - Fix various build issues

Mon Aug 24 14:57:50 CEST 2009 -

- update to bluez-4.49:
  - Add simple test program for basic GAP testing.
  - Add support for confirmation requests to agent example.
  - Add support for full non-recursive build.
  - Add five millisecond delay for Simple Pairing auto-accept.
  - Fix Class of Device setting when InitiallyPowered=false.

Sun Aug 23 00:46:19 CEST 2009 -

- fix init script LSB tags

Thu Aug 20 18:07:48 CEST 2009 -

- try to fix enablement of the coldplug init script

Wed Aug 19 15:32:37 CEST 2009 -

- add init script so that coldplugging works again (bnc#527856)

Mon Aug 17 09:00:05 CEST 2009 -

- update to bluez-4.48:
  - Add library function for comparing UUID values.
  - Add support for creating all plugins as builtins.
  - Add support for async handling of service class changes.
  - Add support for source interface to audio IPC.
  - Fix device name settings when device is off or down.
  - Fix issue with enabled SCO server when not necessary.
  - Fix missing D-Bus access policy for CUPS backend.
  - Fix discovery results of CUPS backend.
  - Fix initialization handling of Maemo telephony.

Mon Aug  3 09:32:48 CEST 2009 -

- update to bluez-4.47:
  - Add support for RFKILL unblock handling.
  - Add support for serial proxy configurations.
  - Add support for caching service class updates.
  - Fix issues with updating SDP service records.
  - Fix usage of limited discoverable mode.
  - Remove deprecated methods and signals for AudioSource.
- bluez-4.46:
  - Add support for A2DP sink role.
  - Fix clearing svc_cache before the adapter is up.
  - Fix various pointer after free usages.
  - Fix various memory leaks.

Thu Jul  9 11:08:28 CEST 2009 -

- packaging: remove unused bluetooth.rules file (thanks darix!)

Wed Jul  8 00:00:30 CEST 2009 -

- update to bluez-4.45:
  - Fix UDEV_DATADIR fallback if pkg-config fails.
  - Fix adapter cleanup and setup prototypes.
  - Fix double-free with out-of-range devices.
  - Fix inband ring setting to be per-headset.
  - Fix handling of Maemo CSD startup.

Tue Jul  7 10:24:05 CEST 2009 -

- update to bluez-4.44:
  - Add some missing manual pages.
  - Fix three-way calling indicator order.
  - Fix downgrade/upgrade of callheld indicator.
  - Fix +CIEV sending when indicator value changes.
  - Fix signal handling for Maemo telephony driver.
  - Fix parsing issues with messages from Maemo CSD.
  - Fix issue with duplicate active calls.
- udev rules moved to /lib/udev/rules.d

Fri Jul  3 23:27:46 CEST 2009 -

- update to bluez-4.43:
  - Add support for udev based on-demand startup.
  - Fix verbose error reporting of CUPS backend.
  - Fix various string length issues.
  - Fix issues with Maemo telephony driver.
  - Fix another device setup and temporary flag issue.
  - Fix and update example agent implementation.
- remove init scripts and D-Bus activation, instead bluetoothd is
  now started by udev. Update README.SUSE accordingly.

Mon Jun 22 12:49:35 CEST 2009 -

- fixed build with --as-needed

Sun Jun 21 19:11:20 CEST 2009 -

- update to bluez-4.42:
  This is the release that should contain fixes found during
  interoperability testing:
  - Add TI WL1271 to Texas Instruments chip list.
  - Add special udev mode to bluetoothd.
  - Fix regression when there is no agent registered.
  - Fix error return when bonding socket hang up.
  - Fix SCO server socket for HFP handsfree role.
  - Fix shutdown on SCO socket before closing.
  - Fix shutdown on A2DP audio stream channel before closing.
  - Fix issue with asserting on AVDTP reference count bugs.
  - Fix authorization denied issue with certain headsets.
  - Fix AVRCP UNITINFO and SUBUNIT INFO responses.
  - Fix discovery cancel issues in case SDP discovery fails.

Sun Jun  7 19:32:51 CEST 2009 -

- update to bluez-4.41:
  - Fix pairing even if the ACL gets dropped before successful SDP.
  - Fix regression which caused device to be removed after pairing.
  - Fix HSP record fetching when remote device doesn't support it.
  - Fix SDP discovery canceling when clearing hs->pending.
  - Fix headset never connecting on the first attempt.
  - Fix headset state tracking if bt_search_service() fails.
  - Fix maximum headset connection count check.
  - Fix AVDTP Discover timeout handling.
  - Fix also UI_SET_KEYBIT for the new pause and play key codes.
- packaging:
  - add simple-agent, simple-service and test-network to bluez-test

Wed May 20 19:42:27 CEST 2009 -

- update to bluez-4.40:
  - Add telephony driver for oFono telephony stack.
  - Add support for Dell specific HID proxy switching.
  - Add support for running hid2hci from udev.
  - Add mapping for AVRCP Play and Pause to dedicated key codes.
  - Fix AVRCP keycodes to better match existing X keymap support.
  - Fix various quoting issues within telephony support.
  - Fix memory allocation issue when generating PDUs for SDP.
  - Fix race condition on device removal.
  - Fix non-cancelable issue with CreateDevice method.
  - Fix non-working CancelDiscovery method call.

Mon May 11 19:26:39 CEST 2009 -

- update to bluez-4.39:
  - Add workaround for dealing with unknown inquiry complete.
  - Fix discovering when using software scheduler.
  - Fix wrong NoInputNoOutput IO capability string.
  - Fix race condition with agent during pairing.
  - Fix agent cancellation for security mode 3 acceptor failure.
  - Fix temporary flag removal when device creation fails.
  - Fix hciattach to use ppoll instead of poll.
  - Fix service class update when adapter is down.
  - Fix service classes race condition during startup.
  - Fix release of audio client before freeing the device.

Mon May  4 20:57:33 CEST 2009 -

- update to bluez-4.38:
  - Add support for builtin plugins.
  - Add framework for adapter operations.
  - Add constants for Enhanced Retransmission modes.
  - Fix HCI socket leak in device_remove_bonding.
  - Fix various format string issues.
  - Fix crashes with various free functions.
  - Fix issues with Headset and A2DP drivers to load again.
  - Fix sending AVRCP button released passthrough messages
  - Fix bug which prevent input devices to work after restart.
  - Fix issue with interpretation of UUID-128 as channel.

Thu Apr 23 17:26:37 CEST 2009 -

- update to bluez-4.37:
  - Add version value for Bluetooth 3.0 devices.
  - Add additional L2CAP extended feature mask bits.
  - Add support for loading plugins in priority order.
  - Add support for more detailed usage of disconnect watches.
  - Add support for AVRCP volume control.
  - Add saturated clipping of SBC decoder output to 16-bit.
  - Fix potentially infinite recursion of adapter_up.
  - Fix SCO handling in the case of an incoming call.
  - Fix input service to use confirm callback.
  - Fix cleanup of temporary device entries from storage.

Sun Apr 19 12:21:12 CEST 2009 -

- update to bluez-4.36:
  - Add proper tracking of AVCTP connect attempts.
  - Add support to channel pattern in Serial interface.
  - Fix A2DP sink crash if removing device while connecting.
  - Fix error handling if HFP indicators aren't initialized.
  - Fix segfault while handling an incoming SCO connection.
  - Fix Serial.Disconnect to abort connection attempt.

Sun Apr 12 05:40:31 CEST 2009 -

- update to bluez-4.35:
  - Add support for Handsfree profile headset role.
  - Add additional checks for open SEIDs from clients.
  - Fix device removal while audio IPC client is connected.
  - Fix device removal when an authorization request is pending.
  - Fix incoming AVDTP connect while authorization in progress.
  - Fix disconnection timers for audio support.
  - Fix various potential NULL pointer deferences.
  - Fix callheld indicator value for multiple calls.
  - Fix voice number type usage.
  - Fix GDBus watch handling.
- add an explicit requires: for the exact libbluetooth3 version
  to the bluez package. Fixes the problem that it was possible to
  install a newer bluez package without updating the libraries

Tue Mar 31 13:43:03 CEST 2009 -

- update to bluez-4.34:
  - Add support for version checks of plugins.
  - Add support for class property on adapter interface.
  - Add support for second SDP attempt after connection reset.
  - Add support for more detailed audio states.
  - Add support for HFP+A2DP auto connection feature.
  - Add support for new and improved audio IPC.
  - Add program for testing audio IPC interface.
  - Fix various AVDTP qualification related issues.
  - Fix broken SDP AttributeIdList parsing.
  - Fix invalid memory access of SDP URL handling.
  - Fix local class of device race conditions.
  - Fix issue with periodic inquiry on startup.
  - Fix missing temporary devices in some situations.
  - Fix SBC alignment issue for encoding with four subbands.

Tue Mar 17 06:47:16 CET 2009 -

- update to bluez-4.33:
  - Add Paired property to the DeviceFound signals.
  - Add support for Headset profile 1.2 version.
  - Fix broken network configuration when IPv6 is disabled.
  - Fix network regression that caused disconnection.
  - Fix SDP truncation of strings with NULL values.
  - Fix service discovery handling of CUPS helper.

Mon Mar  9 20:51:28 CET 2009 -

- renamed modprobe config to /etc/modprobe.d/50-bluetooth.conf
  (required by new module-init-tools).

Mon Mar  2 18:10:00 CET 2009 -

- update to bluez-4.32:
  - Fix broken SDP record handling.
  - Fix SDP data buffer parsing.
  - Fix more SDP memory leaks.
  - Fix read scan enable calls.
  - Fix A2DP stream handling.

Thu Feb 26 13:04:25 CET 2009 -

- update to bluez-4.31:
  - Add support for new BtIO helper library.
  - Fix AVDTP session close issue.
  - Fix SDP memory leaks.
  - Fix various uninitialized memory issues.
  - Fix duplicate signal emissions.
  - Fix property changes request handling.
  - Fix class of device storage handling.

Fri Feb 13 09:30:36 CET 2009 -

- update to bluez-4.30:
  - Add CID field to L2CAP socket address structure.
  - Fix reset of authentication requirements after bonding.
  - Fix storing of link keys when using dedicated bonding.
  - Fix storing of pre-Bluetooth 2.1 link keys.
  - Fix resetting trust settings on every reboot.
  - Fix handling of local name changes.
  - Fix memory leaks in hciconfig and hcitool

Sun Feb  8 15:59:45 CET 2009 -

- update to bluez-4.29:
  - Use AVRCP version 1.0 for now.
  - Decrease AVDTP idle timeout to one second.
  - Delay AVRCP connection when remote device connects A2DP.
  - Add workaround for AVDTP stream setup with broken headsets.
  - Add missing three-way calling feature bit for Handsfree.
  - Fix handsfree callheld indicator updating.
  - Fix parsing of all AT commands within the buffer.
  - Fix authentication replies when disconnected.
  - Fix handling of debug combination keys.
  - Fix handling of changed combination keys.
  - Fix handling of link keys when using no bonding.
  - Fix handling of invalid/unknown authentication requirements.
  - Fix closing of L2CAP raw socket used for dedicated bonding.

Thu Feb  5 18:52:46 CET 2009 -

- update to bluez-4.28:
  - Add AVDTP signal fragmentation support.
  - Add more SBC performance optimizations.
  - Add more SBC audio quality improvements.
  - Use native byte order for audio plugins.
  - Set the adapter alias only after checking the EIR data.
  - Fix auto-disconnect issue with explicit A2DP connections.
  - Fix invalid memory access of ALSA plugin.
  - Fix compilation with -Wsign-compare.
- The ALSA plugin now contains a fix to avoid invalid memory
  access. This might break some audio players that make
  assumptions on some ALSA API calls that are ambigue. Please
  report any problems you might encounter.

Fri Jan 23 14:48:38 CET 2009 -

- init script should work with strict /bin/sh too

Sun Jan 18 13:10:33 CET 2009 -

- update to bluez-4.27:
  "This release contains multiple fixes for the Simple Pairing support and
   newer kernel versions. It highly improves the interoperability and the
   security handling with Bluetooth 2.1 based devices."
  - Add more SBC optimization (MMX and ARM NEON).
  - Add BT_SECURITY and BT_DEFER_SETUP definitions.
  - Add support for deferred connection setup.
  - Add support for fragmentation of data packets.
  - Add option to trigger dedicated bonding.
  - Follow MITM requirements from remote device.
  - Require MITM for dedicated bonding if capabilities allow it.
  - Fix IO capabilities for non-pairing and pairing cases.
  - Fix no-bonding connections in non-bondable mode.
  - Fix new pairing detection with SSP.
  - Fix bonding with pre-2.1 devices and newer kernels.
  - Fix LIAC setting while toggling Pairable property.
  - Fix device creation for incoming security mode 3 connects.
  - Fix crash within A2DP with bogus pointer.
  - Fix issue with sdp_copy_record() function.
  - Fix crash with extract_des() if sdp_uuid_extract() fails.

Thu Jan 15 17:11:19 CET 2009 -

- update to bluez-4.26:
  - Use of constant shift in SBC quantization code.
  - Add possibility to analyze 4 blocks at once in encoder.
  - Fix correct handling of frame sizes in the encoder.
  - Fix for big endian problems in SBC codec.
  - Fix audio client socket to always be non-blocking.
  - Update telephony support for Maemo.
- version 4.25:
  - Fix receiving data over the audio control socket.
  - Fix subbands selection for joint-stereo in SBC encoder.
  - Add new SBC analysis filter function.
- version 4.24:
  - Fix signal emissions when removing adapters.
  - Fix missing adapter signals on exit.
  - Add support for bringing adapters down on exit.
  - Add support for RememberPowered option.
  - Add support for verbose compiler warnings.
  - Add more options to SBC encoder.
- version 4.23:
  - Update audio IPC for better codec handling.
  - Fix bitstream optimization for SBC encoder.
  - Fix length header values of IPC messages.
  - Fix multiple coding style violations.
  - Fix FindDevice to handle temporary devices.
  - Add configuration option for DeviceID.
  - Add support for InitiallyPowered option.
  - Add missing signals for manager properties.
  - Add telephony support for Maemo.

Tue Jan 13 12:54:33 CET 2009 -

- fix the modprobe.d config syntax (bnc#465643)

Thu Jan  8 17:09:02 CET 2009 -

- add a modprobe.d config, setting reset=1 for btusb (bnc#461369)

Sun Dec  7 22:39:05 CET 2008 -

- update to bluez-4.22:
  - Add deny statements to D-Bus access policy.
  - Add support for LegacyPairing property.
  - Add support for global properties.
  - Add more commands to telephony testing script.
  - Add sender checks for serial and network interfaces.
  - Remove deprecated methods and signals from input interface.
  - Remove deprecated methods and signals from network interface.
  - Remove OffMode option and always use device down.

Mon Dec  1 18:16:55 CET 2008 -

- update to bluez-4.21:
  - Fix adapter initialization logic.
  - Fix adapter setup and start security manager early.
  - Fix usage issue with first_init variable.

Mon Dec  1 00:44:09 CET 2008 -

- update to bluez-4.20:
  - Cleanup session handling.
  - Cleanup mode setting handling, removed deprecated RequestMode,
    ReleaseMode and Mode methods.
  - Fix issue with concurrent audio clients.
  - Fix issue with HFP/HSP suspending.
  - Fix AT result code syntax handling.
  - Add Handsfree support for AT+NREC.
  - Add PairableTimeout adapter property.
- refresh pcmciarules patch

Sun Nov 23 01:10:59 CET 2008 -

- update to bluez-4.19:
  - Fix D-Bus signal emmissions for CreateDevice.
  - Fix issues with UUID probing.
  - Fix +BSRF syntax issue.
  - Add Pairable adapter property.
  - Add sdp_copy_record() library function.

Tue Nov 11 09:26:41 CET 2008 -

- add bluez-compat package, containing pand and dund (bnc#435591)

Mon Nov 10 09:14:35 CET 2008 -

- add DBus API documentation files to the bluez package

Sun Nov  9 20:10:15 CET 2008 -

- update to bluez-4.18:
  - Fix release before close issue with RFCOMM TTYs.
  - Fix Connected property on input interface.
  - Fix DeviceFound signals during initial name resolving.
  - Fix service discovery handling.
  - Fix duplicate UUID detection.
  - Fix SBC gain mismatch and decoding handling.
  - Add more options to SBC encoder and decoder.
  - Add special any adapter object for service interface.
  - Add variable prefix to adapter and device object paths.

Mon Nov  3 13:03:23 CET 2008 -

- fix START_SERVICES=no and wrong "Default:"-comment (bnc#435489)

Mon Oct 27 20:48:38 CET 2008 -

- update to bluez-4.17:
  - Fix SBC encoder not writing last frame.
  - Fix missing timer for A2DP suspend.
  - Add more supported devices to hid2hci utility.
  - Add additional functionality to Handsfree support.

Wed Oct 22 10:13:44 CEST 2008 -

- update to bluez-4.16:
  "This release fixes two potential crashes within bluetoothd.
   It is strongly advised to upgrade to this version."
  - Fix wrong parameter usage of watch callbacks.
  - Fix parameters for callback upon path removal.
  - Fix unloading of adapter drivers.
  ver 4.15:
  - Fix various A2DP state machine issues.
  - Fix some issues with the Handsfree error reporting.
  - Fix format string warnings with recent GCC versions.
  - Remove dependency on GModule.

Sat Oct 18 13:20:41 CEST 2008 -

- update to bluez-4.14:
  - Fix types of property arrays.
  - Fix potential crash with input devices.
  - Fix PS3 BD remote input event generation.
  - Allow dynamic adapter driver registration.
  - Update udev rules.

Tue Oct 14 15:30:49 CEST 2008 -

- split up bluez and bluez-gstreamer to avoid circular dependencies

Mon Oct 13 07:35:11 CEST 2008 -

- update to bluez-4.13:
  - Fix service discovery and UUID handling.
  - Fix bonding issues with Simple Pairing.
  - Fix file descriptor misuse of SCO connections.
  - Fix various memory leaks in the device handling.
  - Fix AVCTP disconnect handling.
  - Fix GStreamer modes for MP3 encoding.
  - Add operator selection to Handsfree support.

Mon Oct  6 20:34:13 CEST 2008 -

- update to bluez-4.12:
  - Fix crash with missing icon value.
  - Fix error checks of HAL plugin.
  - Fix SCO server socket cleanup on exit.
  - Fix memory leaks from DBusPendingCall.
  - Fix handling of pending authorization requests.
  - Fix missing protocol UUIDs in record pattern.

Sun Oct  5 16:24:41 CEST 2008 -

- update to bluez-4.11:
  - Change SCO server socket into a generic one. Should fix
    connection issues with headsets.
  - Fix uninitialized reply of multiple GetProperties methods.

Sat Oct  4 09:59:32 CEST 2008 -

- update to bluez-4.10:
  - Fix memory leaks with HAL messages.
  - Add more advanced handsfree features.
  - Add properties to audio, input and network interfaces.
  - Stop device discovery timer on device removal.

Mon Sep 29 18:56:15 CEST 2008 -

- update to bluez-4.9:
  - Fix signals for Powered and Discoverable properties.
  - Fix handling of Alias and Icon properties.
  - Fix duplicate entries for service UUIDs.

Mon Sep2y 09:36:31 CEST 2008 -

- update to bluez-4.8:
  - fix two bluetoothd crashes during device pairing
  - reenable HAL plugin, no need for libhal anymore
  - hciconfig and hcitool now show all extended features pages
    (important because page 1 indicates simple pairing support)

Sat Sep 27 07:04:45 CEST 2008 -

- fix a crash when e.g. connecting a new input device

Fri Sep 26 12:07:21 CEST 2008 -

- update to bluez-4.7:
  - Fix pairing and service discovery logic.
  - Fix crashes during suspend and resume.
  - Fix race condition within devdown mode.
  - Add RequestSession and ReleaseSession methods.
  - Add Powered and Discoverable properties.
  - Add Devices property and deprecate ListDevices.
  - Add workaround for a broken carkit from Nokia.
- removed bluez-4.6-fix-bluetoothd-crash-after-suspend.diff

Thu Sep 25 09:53:08 CEST 2008 -

- fix a bluetoothd crash after resume

Wed Sep 24 00:12:45 CEST 2008 -

- use /dev/shm instead of /var/run for the coldplug-marker, since
  /var/run is cleaned up later in the boot process

Tue Sep 23 17:31:19 CEST 2008 -

- add more useful stuff to bluez-test
- add dbus-activation of bluetoothd
- use dbus-activation to start on adapter hotplug event
- add bluetooth-coldplug init script to make sure that bluetoothd
  is started when adapter is plugged in before DBus is started
- add "Provides: bluez-utils" to bluez, to help the solver

Wed Sep 17 17:16:54 CEST 2008 -

- add missing splitprovides
- fix bluez-utils rename
- remove bogus bluez provide

Mon Sep 15 23:41:33 CEST 2008 -

- update to bluez-4.6:
  * add a smooth upgrade path of configured input devices from
    BlueZ 3.x to the 4.x series
  * fix a couple of regressions with the adapter initialization and
    the input service
  Detailed changelog:
  version 4.6:
  * Fix Device ID record handling.
  * Fix service browsing and storage.
  * Fix authentication and encryption for input devices.
  * Fix adapter name initialization.
  version 4.5:
  * Fix initialization issue with new adapters.
  * Send HID authentication request without blocking.
  * Hide the verbose SDP debug behind SDP_DEBUG.
  * Add extra UUIDs for service discovery.
  * Add SCO server socket listener.
  * Add authorization support to service plugin.

Mon Sep 15 17:06:46 CEST 2008 -

- fix devel package requires

Tue Sep  9 15:08:23 CEST 2008 -

- initial checkin of BlueZ 4

openSUSE Build Service is sponsored by