File 0190-replace-iscsistart-with-systemd-service-files.patch of Package dracut.15536
From c426dc773fe654aed309375e20e398e9299ca34e Mon Sep 17 00:00:00 2001
From: Thomas Blume <Thomas.Blume@suse.com>
Date: Mon, 19 Oct 2015 09:14:53 +0200
Subject: Replace iscsistart with iscsiadm
References: FATE#319024
iscsistart allows for a single connection only, and offers no means
or terminating or re-establishing another one.
So replace iscsistart with iscsiadm to allow several connection for
multipath booting and also to ease maintenance in case of error.
Signed-off-by: Thomas Blume <thomas.blume@suse.com>
---
modules.d/95iscsi/iscsiroot.sh | 48 ++++++++++++++++++++++++------------
modules.d/95iscsi/module-setup.sh | 19 ++++++++++++--
modules.d/95iscsi/parse-iscsiroot.sh | 2 +-
3 files changed, 50 insertions(+), 19 deletions(-)
Index: dracut-044/modules.d/95iscsi/iscsiroot.sh
===================================================================
--- dracut-044.orig/modules.d/95iscsi/iscsiroot.sh 2016-04-18 17:43:51.198589298 +0200
+++ dracut-044/modules.d/95iscsi/iscsiroot.sh 2016-04-18 17:53:11.962323970 +0200
@@ -43,17 +43,13 @@ fi
handle_firmware()
{
- if ! iscsistart -f; then
- warn "iscistart: Could not get list of targets from firmware."
+ if ! iscsiadm -m fw; then
+ warn "iscsiadm: Could not get list of targets from firmware."
return 1
fi
- for p in $(getargs rd.iscsi.param -d iscsi_param); do
- iscsi_param="$iscsi_param --param $p"
- done
-
- if ! iscsistart -b $iscsi_param; then
- warn "'iscsistart -b $iscsi_param' failed with return code $?"
+ if ! iscsiadm -m fw -l; then
+ warn "iscsiadm: Log-in to iscsi target failed"
fi
echo 'started' > "/tmp/iscsistarted-iscsi:"
@@ -77,7 +73,7 @@ handle_netroot()
# override conf settings by command line options
arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
[ -n "$arg" ] && iscsi_initiator=$arg
- arg=$(getarg rd.iscsi.target.name -d iscsi_target_name=)
+ arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=)
[ -n "$arg" ] && iscsi_target_name=$arg
arg=$(getarg rd.iscsi.target.ip -d iscsi_target_ip)
[ -n "$arg" ] && iscsi_target_ip=$arg
@@ -94,7 +90,7 @@ handle_netroot()
arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=)
[ -n "$arg" ] && iscsi_in_password=$arg
for p in $(getargs rd.iscsi.param -d iscsi_param); do
- iscsi_param="$iscsi_param --param $p"
+ iscsi_param="$iscsi_param $p"
done
parse_iscsi_root "$1" || return 1
@@ -182,45 +178,37 @@ handle_netroot()
echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > $hookdir/mount/01-$$-iscsi.sh
fi
- if [ -n "$DRACUT_SYSTEMD" ] && command -v systemd-run >/dev/null 2>&1; then
- netroot_enc=$(systemd-escape "iscsistart_${1}")
- status=$(systemctl is-active "$netroot_enc" 2>/dev/null)
- is_active=$?
- if [ $is_active -ne 0 ]; then
- if [ "$status" != "activating" ] && ! systemctl is-failed "$netroot_enc" >/dev/null 2>&1; then
- systemd-run --no-block --service-type=oneshot --remain-after-exit --quiet \
- --description="Login iSCSI Target $iscsi_target_name" \
- --unit="$netroot_enc" -- \
- $(command -v iscsistart) \
- -i "$iscsi_initiator" -t "$iscsi_target_name" \
- -g "$iscsi_target_group" -a "$iscsi_target_ip" \
- -p "$iscsi_target_port" \
- ${iscsi_username:+-u "$iscsi_username"} \
- ${iscsi_password:+-w "$iscsi_password"} \
- ${iscsi_in_username:+-U "$iscsi_in_username"} \
- ${iscsi_in_password:+-W "$iscsi_in_password"} \
- ${iscsi_iface_name:+--param "iface.iscsi_ifacename=$iscsi_iface_name"} \
- ${iscsi_netdev_name:+--param "iface.net_ifacename=$iscsi_netdev_name"} \
- ${iscsi_param} >/dev/null 2>&1 \
- && { > $hookdir/initqueue/work ; }
+ ### ToDo: Upstream calls systemd-run - Shall we, do we have to port this?
+
+ if iscsiadm -m node; then
+ targets=$(iscsiadm -m node | sed 's/^.*iqn/iqn/')
+ else
+ targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/')
+ [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && exit 1
+ fi
+
+ for target in $iscsi_target_name; do
+ if [[ "$targets" =~ "$target" ]]; then
+ if [ -n "$iscsi_iface_name" ]; then
+ $(iscsiadm -m iface -I $iscsi_iface_name --op=new)
+ [ -n "$iscsi_initiator" ] && $(iscsiadm -m iface -I $iscsi_iface_name --op=update --name=iface.initiatorname --value=$iscsi_initiator)
+ [ -n "$iscsi_netdev_name" ] && $(iscsiadm -m iface -I $iscsi_iface_name --op=update --name=iface.net_ifacename --value=$iscsi_netdev_name)
+ COMMAND="iscsiadm -m node -T $target -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port} -I $iscsi_iface_name --op=update"
else
- systemctl --no-block restart "$netroot_enc" >/dev/null 2>&1 \
- && { > $hookdir/initqueue/work ; }
+ COMMAND="iscsiadm -m node -T $target -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port} --op=update"
fi
+ $($COMMAND --name=node.startup --value=onboot)
+ [ -n "$iscsi_username" ] && $($COMMAND --name=node.session.auth.username --value=$iscsi_username)
+ [ -n "$iscsi_password" ] && $($COMMAND --name=node.session.auth.password --value=$iscsi_password)
+ [ -n "$iscsi_in_username" ] && $($COMMAND --name=node.session.auth.username_in --value=$iscsi_in_username)
+ [ -n "$iscsi_in_password" ] && $($COMMAND --name=node.session.auth.password_in --value=$iscsi_in_password)
+ [ -n "$iscsi_param" ] && $($COMMAND --name=${iscsi_param%=*} --value=${iscsi_param#*=}
fi
- else
- iscsistart -i "$iscsi_initiator" -t "$iscsi_target_name" \
- -g "$iscsi_target_group" -a "$iscsi_target_ip" \
- -p "$iscsi_target_port" \
- ${iscsi_username:+-u "$iscsi_username"} \
- ${iscsi_password:+-w "$iscsi_password"} \
- ${iscsi_in_username:+-U "$iscsi_in_username"} \
- ${iscsi_in_password:+-W "$iscsi_in_password"} \
- ${iscsi_iface_name:+--param "iface.iscsi_ifacename=$iscsi_iface_name"} \
- ${iscsi_netdev_name:+--param "iface.net_ifacename=$iscsi_netdev_name"} \
- ${iscsi_param} \
- && { > $hookdir/initqueue/work ; }
- fi
+ done
+
+ iscsiadm -m node -L onboot || :
+ > $hookdir/initqueue/work
+
netroot_enc=$(str_replace "$1" '/' '\2f')
echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
return 0
Index: dracut-044/modules.d/95iscsi/module-setup.sh
===================================================================
--- dracut-044.orig/modules.d/95iscsi/module-setup.sh 2016-04-18 17:43:51.198589298 +0200
+++ dracut-044/modules.d/95iscsi/module-setup.sh 2016-04-18 17:53:11.962323970 +0200
@@ -4,7 +4,7 @@
check() {
local _rootdev
# If our prerequisites are not met, fail anyways.
- require_binaries iscsistart hostname iscsi-iname || return 1
+ require_binaries hostname iscsi-iname iscsiadm iscsid || return 1
# If hostonly was requested, fail the check if we are not actually
# booting from root.
@@ -211,9 +211,22 @@ cmdline() {
# called by dracut
install() {
- inst_multiple umount iscsistart hostname iscsi-iname
inst_multiple -o iscsiuio
inst_libdir_file 'libgcc_s.so*'
+ inst_multiple umount hostname iscsi-iname iscsiadm iscsid
+
+ ln -sf $systemdsystemunitdir/iscsid.socket $systemdsystemunitdir/sockets.target.wants/iscsid.socket
+ ln -sf $systemdsystemunitdir/iscsiuio.socket $systemdsystemunitdir/sockets.target.wants/iscsiuio.socket
+
+ inst_multiple -o \
+ $systemdsystemunitdir/iscsid.socket \
+ $systemdsystemunitdir/iscsid.service \
+ $systemdsystemunitdir/iscsiuio.service \
+ $systemdsystemunitdir/iscsiuio.socket \
+ $systemdsystemunitdir/sockets.target.wants/iscsid.socket \
+ $systemdsystemunitdir/sockets.target.wants/iscsiuio.socket
+
+ [[ -d /etc/iscsi ]] && inst_dir $(/usr/bin/find /etc/iscsi)
# Detect iBFT and perform mandatory steps
if [[ $hostonly_cmdline == "yes" ]] ; then
@@ -221,6 +234,8 @@ install() {
[[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf"
fi
+ echo 'rd.neednet=1' >> "${initdir}/etc/cmdline.d/95iscsi.conf"
+
inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh"
inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
