File _patchinfo of Package patchinfo.13299

Overview Repositories Revisions Requests Users Attributes Meta

File _patchinfo of Package patchinfo.13299

<patchinfo incident="13299">
  <issue tracker="bnc" id="1157040">PubCloud: Update Azure LI packages / images</issue>
  <issue tracker="bnc" id="1157041">PubCloud: Update Azure LI packages / images</issue>
  <packager>sax2</packager>
  <rating>moderate</rating>
  <category>recommended</category>
  <summary>Recommended update for azure-li-services</summary>
  <description>This update for azure-li-services fixes the following issues:

- Bump version: 1.2.3 to 1.2.4

- Reference commit for SUSE maintenance
  This submission creates a reference to bsc#1157041

- Reference commit for SUSE maintenance
  This submission creates a reference to bsc#1157040

- Bump version: 1.2.2 to 1.2.3

- Right name for vli sp2 folder

- Add folder for SLES15 SP2 VLI images

- Fixed VLI package list for sle15
  cpp48 does not exist on sle15, instead the cpp package
  by its name provides is used. On sle15 this resolved to
  cpp7. This is related to Issue #186

- Bump version: 1.2.1 to 1.2.2

- Added Microsoft requested packages to VLI images
  This Fixes #186

- Add retry loop to setup sbd device
  There is no deterministic way to know when the iSCSI device
  is ready to be processed by sbd. Thus the calls to setup the
  sbd device has been placed into a retry loop that runs max
  3 times with a 2sec wait period in between. This Fixes #188

- Add directory for SLES15-SP2

- Saptune setup
  As pointed before, saptune supersedes sapconf.
  This is the right path to setup saptune.
  Update image descriptions not to install sapconf.
  This Fixes #185

- Update LI image versions
  For the refresh of the images in the SUSE namespace the version
  number has been increased

- Bump version: 1.2.0 to 1.2.1

- Right sequence saptune

One of the issues is that `saptune` is a different tool that supersedes
  `sapconf`. Then the `saptune daemon restart` command will always
  overwrite the profile with `saptune`. Two different tools that can't be
  mixed. Only one should be used.
  In case of SLES (not SLES for SAP), the sequence should be
  For SLES 12
  ```
  tuned-adm profile sap-hana
  systemctl enable --now sapconf.service
  ```
  and for SLES15
  ```
  tuned-adm profile sapconf
  systemctl enable --now sapconf.service
  ```
  For SLES for SAP, the sequence is the same for 12 and 15:
  ```
  saptune daemon start
  saptune solution apply HANA
  ```
  This Fixes #172

- Bump version: 1.1.39 to 1.2.0

- Change the setup of the login shell
  The login shell was setup based on assumption regarding other
  user attributes set. This way caused some negative side effects
  which lets us change the behavior. This patch does the following
  * Adds a new attribute named: loginshell
  * If loginshell is present the value for loginshell will be used,
    if not the default /sbin/nologin applies
  * All implicit assumptions for setting up the login shell
    got deleted

This Fixes #178

- sbd device to wait for udev to finish
  This Fixes #179

- Bump version: 1.1.38 to 1.1.39

- Consolidate all image descriptions in git
  Instead of maintaining image descriptions in obs we want to
  maintain them in git. With this change only a service and
  multibuild configuration applies in obs but the data to
  build the image will live in git. This allows for real
  development and review regarding changes to the kiwi image
  descriptions.

- Restart iscsi subsystem after device discovery
  Only after restart of the iscsi subsystem the device nodes
  from a previous device discovery gets created properly.
  This Fixes #170

- Bump version: 1.1.37 to 1.1.38

- Added more logging to the process
  Add a log file /var/log/azure-li-services.log which adds
  logging information from the service process. Usually error
  log information is present on the systemd level but for
  checking the process, it's calls and potential further information
  it's also useful to have a processing log file. The log file
  will be created on the host and gets also copied to the config
  lun in the same way as the systemd workload log

- Bump version: 1.1.36 to 1.1.37

- Delete ineffective startup.nsh code
  startup.nsh is read by the firmware in an early boot phase.
  It doesn't make sense to write that file as part of the boot
  services because it's too late in the process. startup.nsh
  if required needs to be provided by the image itself

- Extend storage service dependencies
  The storage service can be used for remote storage like NFS
  storage to be attached to the machine. This requires the network
  to be online. Having the network only configured is not enough
  it must also be online. Thus the storage service unit is extended
  to wait for the network-online.target

- Bump version: 1.1.35 to 1.1.36

- Fixed network setup for bonding on vlan
  vlan network definitions that uses bonding etherdevices
  were missing a switch to correctly assign the ip configuration
  This Fixes #164

- Bump version: 1.1.34 to 1.1.35

- Apply saptune startup sequence suggested by $MS
  Implementing startup sequence as suggested in SAP Note 1275776.
  This Fixes #149

- Log command calls on the console
  Implements a simple logging facility for the Command classes
  and write the commands called to the console. This will lead
  to more detailed information about the command calls in the
  systemd status information

- Load yaml in safe mode
  The default yaml loader is unsafe, thus we should switch
  to the safe_load method. For details see: https://msg.pyyaml.org/load

- Bump version: 1.1.33 to 1.1.34

- Start saptune daemon after applying profile
  For some reason the saptune daemon needs to restart if a
  profile has been set through the tuned-adm profile command.
  This Fixes #149

- Revert fix for service order of saptune daemon
  It has turned out that the simple change in order did
  not solve the problem. In fact the daemon needs to be
  restarted on profile setup

- Allow ssh access with shell
  Allow access through ssh without shadow hash and
  with shell.
  Fixes #151

- Bump version: 1.1.32 to 1.1.33

- Fix service order on startup of saptune daemon
  The tuned profile must be applied prior to the start of
  the saptune daemon. This Fixes #149

- Bump version: 1.1.31 to 1.1.32

- Fixed travis badge link

- Mount LUN in sync mode
  Per request from Microsoft the location that holds the
  config file and is also used for the status flag and
  log should be mounted with the sync option.
  This Fixes #144

- Activate SAP Hana profile via tuned-adm
  Check for the presence of the sap-hana profile and switch
  to sapconf if not found. Activate the selected profile via
  the tuned-adm control command. This Fixes #142
  </description>
</patchinfo>

Places

File _patchinfo of Package patchinfo.13299

Places