Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP3:Update
s390-tools.23004
s390-tools.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File s390-tools.changes of Package s390-tools.23004
------------------------------------------------------------------- Tue Feb 22 21:44:19 UTC 2022 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-zdev-modify-the-lsblk-output-parser-in-lszdev.patch for bsc#1196258. Version 2.37+ of util-linux modified the output characters of lsblk,which breaks the parser function. - Added s390-tools-sles15sp3-zdev-Fix-path-resolution-for-multi-mount-point-file-.patch for bsc#1196257. Path resolution fails when a device provides multiple mount points such as, for example, when using btrfs subvolumes, or when mounting the same file system at multiple mount points. ------------------------------------------------------------------- Mon Dec 13 20:50:22 UTC 2021 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-dbginfo.sh-add-remove-commands.patch for dbginfo.sh: Collect /proc/kallsyms, issue additional commands (bsc#1193462): o Required data gets not collected during run of dbginfo.sh o vmcp q cache command always fails - Added the following patches for dbginfo.sh: stabilzation of data collection (bsc#1193461): o script hangup possible on single commands o missing data collection on error o overwrite of buffers by diag commands * s390-tools-sles15sp3-01-dbginfo.sh-add-kvm-data-collection.patch * s390-tools-sles15sp3-02-dbginfo.sh-add-zipl-boot-entries.patch * s390-tools-sles15sp3-03-dbginfo.sh-cleanup-2x-kernel-add-timeout.patch * s390-tools-sles15sp3-04-dbginfo.sh-code-rework.patch * s390-tools-sles15sp3-05-dbginfo.sh-reorder-collection-steps.patch * s390-tools-sles15sp3-06-dbginfo.sh-collect-udev-rules-from-DPM-device-auto-c.patch * s390-tools-sles15sp3-07-dbginfo.sh-addtional-timeout-and-omitting-a-report.patch ------------------------------------------------------------------- Fri Nov 12 18:05:00 UTC 2021 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-dbginfo.sh-exclude-page_idle-bitmap.patch Reading /sys/kernel/mm/page_idle/bitmap can cause hang up on reading offline pages. (bsc#1192599) - Added %{version} to the Requires: libekmfweb1 for the libekmfweb1-devel package. ------------------------------------------------------------------- Fri Jun 18 20:55:06 UTC 2021 - Mark Post <mpost@suse.com> - Reworked s390-tools-sles15sp2-Implement-Y-yast_mode.patch (yet again). If more DASD volumes are to be formatted than are allowed by the "maximum number to do in parallel" parameter, dasdfmt waits until one of the child processes ends before starting another. For YaST to be able to figure out how many cylinders a particular DASD volume has, that information has to be output for _all_ of the volumes, before any of the child processes are spawned. (bsc#1187012) ------------------------------------------------------------------- Wed May 26 21:13:23 UTC 2021 - Mark Post <mpost@suse.com> - Modified the following patches to correct the output from the dasdfmt command when *not* using "YaST mode." (bsc#1182816, bsc#1182820) * s390-tools-sles15sp3-Format-devices-in-parallel.patch * s390-tools-sles15sp3-Implement-Y-yast_mode.patch ------------------------------------------------------------------- Thu May 6 13:59:15 UTC 2021 - Mark Post <mpost@suse.com> - Modified s390-tools-sles15-Implement-Y-yast_mode.patch by adding a fflush(stdout) statement so that the dasdfmt command would produce the correct output for YaST. (bsc#1182816, bsc#1182820) - Modified s390-tools-sles15-Implement-f-for-backwards-compability.patch to have the correct offset for hunk #2 to apply without warnings. ------------------------------------------------------------------- Wed Apr 14 18:13:27 UTC 2021 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-dasd-change-DASD-udev-rule-to-set-none-scheduler.patch dasd: change default scheduler to reduce CPU consumption (bsc#1183810) - Modified s390-tools-sles12-create-filesystem-links.patch to fit after applying s390-tools-sles15sp3-dasd-change-DASD-udev-rule-to-set-none-scheduler.patch - Removed 59-dasd.rules-wait_for.patch obsoleted by bsc#1183810. ------------------------------------------------------------------- Mon Mar 8 20:52:57 UTC 2021 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-zipl-fix-4k-scsi-ipl.patch (bsc#1183039) IPL is not working when bootloader is installed on a SCSI disk with 4k physical blocksize without using a devicemapper target. - Added s390-tools-sles15sp3-remove-no-pie-link-arguments.patch so that we can build on systems with binutils 2.36 and higher. Without this, the build fails because that version of the ld command doesn't recognize "-no-pie" an acceptable argument. - Updated the mkdump.pl script to make the name of the temporary configuration file in /tmp/ unpredictable. (bsc#1182876) ------------------------------------------------------------------- Sat Feb 27 23:07:46 UTC 2021 - Mark Post <mpost@suse.com> - Updated detach_disks.sh to not use predictable temporary file names. (bsc#1182777, CVE-2021-25316) - Made for the following changes for bsc#1182816: * Updated s390-tools-sles15sp3-Format-devices-in-parallel.patch to change all instances of the progress bar from printing "#" to printing the process number of the DASD volume being formatted. * Updated s390-tools-sles15sp3-Implement-Y-yast_mode.patch to print out the numbder of cylinders in a device, as was done in the prior versions of this patch, but was missed when modifying it for SLES15 SP3. * Added s390-tools-sles15sp3-check-return-code-from-util_file_read_l.patch because otherwise a warning message from dasdfmt is being generated that could interfere with YaST properly processing the progress of the formatting process. ------------------------------------------------------------------- Wed Feb 17 20:47:26 UTC 2021 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp3-zkey-Fix-APQN-property-names.patch (bsc#1182113) Problem: The KMS configuration property names to store the CCA and EP11 APQNs are incorrect, i.e. swapped. Solution: Correct the KMS configuration property names. ------------------------------------------------------------------- Thu Jan 28 21:23:35 UTC 2021 - Mark Post <mpost@suse.com> - Moved %dir %{_libdir}/zkey and %{_libdir}/zkey/zkey-ekmfweb.so from the libekfmweb1 package to the main package since it is a plugin for the zkey command, and not a shared library. (bsc#1180534) ------------------------------------------------------------------- Mon Dec 7 17:53:46 UTC 2020 - Mark Post <mpost@suse.com> - Upgraded to version 2.15.1. (bsc#1178250, jsc#SLE-13663) - Added s390-tools-sles15sp3-dasdfmt-Fix-segfault-when-an-incorrect-option-is-spe.patch (bsc#1178313). When specifying an incorrect program option, dasdfmt segfaults as the format string for the corresponding error message has no parameter. - Added s390-tools-sles15sp3-libutil-Compare-proc-entries-to-vfstype.patch (bsc#1178315). The fdasd command was failing if sysfs was mounted this way: mount -t sysfs none /sys To make sure that the mount point of the sysfs is still found when mounted with a device keyword specified other than 'sysfs', check for the filesystem type instead, which is more specific. - Added the following patches for bsc#1178427, and jsc#SLE-13768, Log DASD info for endpoint security * s390-tools-sles15sp3-01-zdev-Add-FC-Endpoint-Security-information-for-DASD-d.patch * s390-tools-sles15sp3-02-lsdasd-Add-FC-Endpoint-Security-information.patch - Added the following patch for bsc#1178628 and jsc#SLE-13765, Converged HiperSockets/Ethernet Interface * s390-tools-sles15sp3-hsci-Add-new-tool-to-control-HiperSockets-Converged-.patch - Added the following patches for bsc#1178992 and jsc#SLE-13772, Add host-key document verification support to genprotimg. * s390-tools-sles15sp3-01-genprotimg-abort-if-one-of-the-recursive-targets-is-.patch * s390-tools-sles15sp3-02-genprotimg-fix-two-memory-leaks.patch * s390-tools-sles15sp3-03-genprotimg-require-argument-for-ramdisk-and-parmfile.patch * s390-tools-sles15sp3-04-genprotimg-add-host-key-document-verification-suppor.patch - Added the following patch for bsc#1178734. Running zcryptstats when many domains are available per cryto card does not produce any output, and is hanging in a loop. * s390-tools-sles15sp3-zcryptstats-Fix-handling-of-partial-results-with-man.patch - Reworked and renamed the following patches to accommodate changes made by IBM to the structure of the dasdfmt command. * s390-tools-sles15-Allow-multiple-device-arguments.patch renamed to s390-tools-sles15sp3-Allow-multiple-device-arguments.patch. * s390-tools-sles15-Format-devices-in-parallel.patch renamed to s390-tools-sles15sp3-Format-devices-in-parallel.patch * dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch renamed to s390-tools-sles15sp3-dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch * s390-tools-sles15-Implement-f-for-backwards-compability.patch renamed to s390-tools-sles15sp3-Implement-f-for-backwards-compability.patch renamed to * s390-tools-sles15-Implement-Y-yast_mode.patch s390-tools-sles15sp3-Implement-Y-yast_mode.patch ------------------------------------------------------------------- Tue Oct 27 23:06:45 UTC 2020 - Mark Post <mpost@suse.com> - Upgraded to version 2.15.0 (jsc#SLE-13662, jsc#SLE-13663, jsc#SLE-13667, jsc#SLE-13724, jsc#SLE-13728, jsc#SLE-13730, jsc#SLE-13739, jsc#SLE-13744, jsc#SLE-13751, jsc#SLE-13755, jsc#SLE-13765, jsc#SLE-13768, jsc#SLE-13777, jsc#SLE-13814, jsc#SLE-13819, jsc#SLE-13820) - Reworked s390-tools-sles12-sysconfig-compatible-dumpconf.patch to fit the current version and renamed it to s390-tools-sles15-sysconfig-compatible-dumpconf.patch - Removed the following obsolete patches: * s390-tools-sles15sp2-01-zkey-Separate-and-rework-CCA-host-library-loading.patch * s390-tools-sles15sp2-02-zkey-Move-utility-functions-into-separate-source-fil.patch * s390-tools-sles15sp2-03-zkey-Add-utility-function-to-get-the-serial-number-o.patch * s390-tools-sles15sp2-04-zkey-Add-utility-function-to-get-the-mkvp-of-a-crypt.patch * s390-tools-sles15sp2-05-zkey-add-function-to-iterate-over-all-available-CCA-.patch * s390-tools-sles15sp2-06-zkey-Add-function-to-print-the-MKVPs-of-APQNs.patch * s390-tools-sles15sp2-07-zkey-Add-function-to-cross-check-APQNs-for-valid-mas.patch * s390-tools-sles15sp2-08-zkey-Add-function-to-obtain-the-mkvp-of-a-secure-key.patch * s390-tools-sles15sp2-09-zkey-Display-MKVP-when-validating-a-secure-key.patch * s390-tools-sles15sp2-10-zkey-Cross-check-APQNs-when-generating-secure-keys.patch * s390-tools-sles15sp2-11-zkey-Cross-check-APQNs-when-validating-secure-keys.patch * s390-tools-sles15sp2-12-zkey-Cross-check-APQNs-when-importing-secure-keys.patch * s390-tools-sles15sp2-13-zkey-Cross-check-APQNs-when-changing-APQN-associatio.patch * s390-tools-sles15sp2-14-zkey-Add-function-to-select-a-specific-CCA-adapter.patch * s390-tools-sles15sp2-15-zkey-Add-function-to-select-a-CCA-adapter-by-mkvp.patch * s390-tools-sles15sp2-16-zkey-Select-CCA-adapter-when-re-enciphering.patch * s390-tools-sles15sp2-17-zkey-cryptsetup-Add-to-new-and-from-old-options.patch * s390-tools-sles15sp2-18-zkey-Display-key-type-with-list-and-validate-command.patch * s390-tools-sles15sp2-19-zkey-Allow-to-filter-list-output-by-key-type.patch * s390-tools-sles15sp2-20-zkey-Allow-to-specify-the-key-type-with-the-generate.patch * s390-tools-sles15sp2-21-zkey-Preparations-for-introducing-a-new-key-type.patch * s390-tools-sles15sp2-22-zkey-Introduce-the-CCA-AESCIPHER-key-type.patch * s390-tools-sles15sp2-23-zkey-Add-wrappers-for-the-new-IOCTLs-with-fallback-t.patch * s390-tools-sles15sp2-24-zkey-Add-helper-functions-to-build-lists-of-APQNs.patch * s390-tools-sles15sp2-25-zkey-Add-support-for-generating-AES-CIPHER-keys.patch * s390-tools-sles15sp2-26-zkey-Add-support-for-validating-AES-CIPHER-keys.patch * s390-tools-sles15sp2-27-zkey-Add-support-for-re-enciphering-AES-CIPHER-keys.patch * s390-tools-sles15sp2-28-zkey-Check-crypto-card-level-during-APQN-cross-check.patch * s390-tools-sles15sp2-29-zkey-Add-helper-function-to-query-the-CCA-firmware-v.patch * s390-tools-sles15sp2-30-zkey-Add-helper-function-to-convert-secure-keys-betw.patch * s390-tools-sles15sp2-31-zkey-Add-helper-function-to-restrict-export-of-secur.patch * s390-tools-sles15sp2-32-zkey-Add-helper-function-to-check-an-AES-CIPHER-key.patch * s390-tools-sles15sp2-33-zkey-Add-key-checks-when-importing-a-CCA-AESCIPHER-k.patch * s390-tools-sles15sp2-34-zkey-Add-convert-command-to-convert-keys-from-one-ty.patch * s390-tools-sles15sp2-35-zkey-Allow-zkey-cryptsetup-setkey-to-set-different-k.patch * s390-tools-sles15sp2-zcrypt-CEX7S-exploitation-support.patch * s390-tools-sles15sp2-zcryptstats-Add-support-for-CEX7.patch * s390-tools-sles15sp2-zkey-Fix-listing-of-keys-on-file-systems-reporting-D.patch * s390-tools-sles15sp2-zkey-Fix-display-of-clear-key-size-for-XTS-keys.patch * s390-tools-sles15sp2-zkey-Fix-display-of-XTS-attribute-for-validate-comma.patch * s390-tools-sles15sp2-zkey-Fix-display-of-clear-key-size-for-CCA-AESCIPHER.patch * s390-tools-sles15sp2-01-zipl-libc-Introduce-vsnprintf.patch * s390-tools-sles15sp2-02-zipl-libc-Fix-potential-buffer-overflow-in-printf.patch * s390-tools-sles15sp2-03-zipl-libc-Replace-sprintf-with-snprintf.patch * s390-tools-sles15sp2-04-zipl-libc-Indicate-truncated-lines-in-printf-with.patch * s390-tools-sles15sp2-01-zpcictl-Initiate-recover-after-reset.patch * s390-tools-sles15sp2-02-zpcictl-Rename-misleading-sysfs_write_data.patch * s390-tools-sles15sp2-03-zpcitctl-Exit-on-error-in-sysfs_report_error.patch * s390-tools-sles15sp2-01-zipl-fix-Wdiscarded-qualifiers.patch * s390-tools-sles15sp2-02-zipl-fix-Waddress-of-packed-member.patch * s390-tools-sles15sp2-03-zipl-remove-some-useless-__packed___-attributes.patch * s390-tools-sles15sp2-04-zipl-Fix-entry-point-for-stand-alone-kdump.patch * s390-tools-sles15sp2-05-zipl-Fix-dependency-generation-in-zipl-boot.patch * s390-tools-sles15sp2-06-zipl-Make-use-of-__packed-macro.patch * s390-tools-sles15sp2-07-zipl-define-__section-macro-and-make-use-of-it.patch * s390-tools-sles15sp2-08-zipl-Make-use-of-__noreturn-macro.patch * s390-tools-sles15sp2-09-zipl-Define-__noinline-macro-and-make-use-of-it.patch * s390-tools-sles15sp2-10-zipl-stage3-Mark-start_kernel-__noreturn.patch * s390-tools-sles15sp2-11-zipl-sclp-Remove-duplicate-macros.patch * s390-tools-sles15sp2-12-zipl-Make-address-size-mask-macros-UL.patch * s390-tools-sles15sp2-13-zipl-libc-Use-stdint.h-instead-of-self-defined-macro.patch * s390-tools-sles15sp2-14-zipl-Consolidate-IMAGE-macros.patch * s390-tools-sles15sp2-15-zipl-Consolidate-STAGE-2-3-macros.patch * s390-tools-sles15sp2-16-zipl-stfle-use-uint64_t-instead-of-u64.patch * s390-tools-sles15sp2-17-zipl-boot-fix-comment-in-stage3.lds.patch * s390-tools-sles15sp2-18-lib-zt_common-add-STATIC_ASSERT-macro.patch * s390-tools-sles15sp2-19-zipl-use-STATIC_ASSERT-macro-for-no-padding-verifica.patch * s390-tools-sles15sp2-20-Support-lib-zt_common.h-to-be-used-in-assembler-and-.patch * s390-tools-sles15sp2-21-zipl-move-IPL-related-definitions-into-separate-head.patch * s390-tools-sles15sp2-22-zipl-move-SIGP-related-functions-and-definitions-int.patch * s390-tools-sles15sp2-23-zipl-add-SIGP_SET_ARCHITECTURE-to-sigp.h-and-use-it.patch * s390-tools-sles15sp2-24-zipl-stage3-make-IPL_DEVICE-definition-consistent-wi.patch * s390-tools-sles15sp2-25-zipl-move-Linux-layout-definitions-into-separate-hea.patch * s390-tools-sles15sp2-26-zipl-tape0-use-constants-defined-in-linux_layout.h.patch * s390-tools-sles15sp2-27-zipl-use-STAGE3_ENTRY-for-STAGE3_LOAD_ADDRESS.patch * s390-tools-sles15sp2-28-zipl-move-loaders-layout-definitions-into-separate-h.patch * s390-tools-sles15sp2-29-zipl-s390.h-rename-inline-macro-into-__always_inline.patch * s390-tools-sles15sp2-30-zipl-move-__always_inline-barrier-__pa32-pa-to-zt_co.patch * s390-tools-sles15sp2-31-zipl-make-BLK_PWRT-unsigned-int.patch * s390-tools-sles15sp2-32-Consolidate-MIN-and-MAX-macros.patch * s390-tools-sles15sp2-33-zipl-remove-libc.h-include-in-s390.h.patch * s390-tools-sles15sp2-34-zipl-move-s390.h-to-include-boot-s390.h.patch * s390-tools-sles15sp2-35-zipl-libc-include-s390.h.patch * s390-tools-sles15sp2-36-include-boot-s390.h-move-panic-and-panic_notify-to-l.patch * s390-tools-sles15sp2-37-include-boot-s390.h-fixes-for-Werror-sign-conversion.patch * s390-tools-sles15sp2-38-zipl-refactor-all-EBCDIC-code-into-separate-files.patch * s390-tools-sles15sp2-39-zipl-sclp-add-macros-for-the-control-program-masks.patch * s390-tools-sles15sp2-40-zipl-sclp-add-sclp_print_ascii.patch * s390-tools-sles15sp2-41-zipl-libc-printf-print-on-linemode-and-ASCII-console.patch * s390-tools-sles15sp2-42-Consolidate-ALIGN-__ALIGN_MASK-ARRAY_SIZE-macros.patch * s390-tools-sles15sp2-43-genprotimg-boot-initial-bootloader-support.patch * s390-tools-sles15sp2-44-genprotimg-boot-use-C-pre-processor-for-linker-scrip.patch * s390-tools-sles15sp2-45-genprotimg-add-relocator-for-stage3b.patch * s390-tools-sles15sp2-46-README.md-remove-useless-empty-line.patch * s390-tools-sles15sp2-47-include-boot-s390.h-add-guard-for-struct-__vector128.patch * s390-tools-sles15sp2-48-genprotimg-introduce-new-tool-for-the-creation-of-PV.patch * s390-tools-sles15sp2-01-zipl-Add-missing-options-to-help-output.patch * s390-tools-sles15sp2-02-zipl-allow-stand-alone-secure-option-on-command-l.patch * s390-tools-sles15sp2-03-zipl-correct-secure-boot-config-handling.patch * s390-tools-sles15sp2-04-zipl-fix-zipl.conf-man-page-example-for-secure-boot.patch * s390-tools-sles15sp2-01-cpumf-add-new-deflate-counters-for-z15.patch * s390-tools-sles15sp2-vmcp-exit-code.patch * s390-tools-sles15sp2-zipl-prevent-endless-loop-during-IPL.patch * s390-tools-sles15sp2-zipl-check-for-valid-ipl-parmblock-lowcore-pointer.patch * s390-tools-sles15sp2-01-zipl-libc-libc_stop-move-noreturn-to-declaration.patch * s390-tools-sles15sp2-02-zipl-stage3-correctly-handle-diag308-response-code.patch * s390-tools-sles15sp2-lsluns-try-harder-to-find-udevadm.patch * s390-tools-sles15sp2-znetconf-introduce-better-ways-to-locate-udevadm.patch * s390-tools-sles15sp2-mon_tools-update-udevadm-location.patch * s390-tools-sles15sp2-lscpumf-change-dflt-ccerror-counter-name.patch * s390-tools-sles15sp2-01-zdev-Introduce-read-only-attributes.patch * s390-tools-sles15sp2-02-zdev-Handle-special-case-in-if-case.patch * s390-tools-sles15sp2-03-zdev-Report-FC-Endpoint-Security-of-zfcp-devices.patch * s390-tools-sles15sp2-04-zfcpdbf-print-HBA-FC-Endpoint-Security-trace-records.patch * s390-tools-sles15sp1-zdev-Also-include-the-ctc-driver-in-the-initrd.patch not in spec file * s390-tools-sles15sp2-Close-file-descriptor-when-checking-for-read-only.patch not in spec file ------------------------------------------------------------------- Thu Sep 17 20:16:08 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp2-lscpumf-change-dflt-ccerror-counter-name.patch (bsc#1176508) lscpumf displays counter number 265 as DFLT_CCERROR. This is wrong and differs from the counter name as defined in the Linux kernel version 5.8 and later. - Added the following patches to implement the post-GA feature jsc#ECO-2636 Log FCP link info for endpoint security (bsc#1175477) * s390-tools-sles15sp2-01-zdev-Introduce-read-only-attributes.patch * s390-tools-sles15sp2-02-zdev-Handle-special-case-in-if-case.patch * s390-tools-sles15sp2-03-zdev-Report-FC-Endpoint-Security-of-zfcp-devices.patch * s390-tools-sles15sp2-04-zfcpdbf-print-HBA-FC-Endpoint-Security-trace-records.patch ------------------------------------------------------------------- Tue Sep 15 18:46:04 CEST 2020 - ro@suse.de - use libexecdir for net-snmp agent config ------------------------------------------------------------------- Fri Jul 24 21:17:36 UTC 2020 - Mark Post <mpost@suse.com> - The location of the udevadm binary was changed from /sbin/ to /usr/bin a while back. A symbolic link was added for compatibility. In the latest versions, that symbolic link has been removed, requiring changes to scripts that were depending on that. Added the following patches for bsc#1171587 * s390-tools-sles15sp2-lsluns-try-harder-to-find-udevadm.patch * s390-tools-sles15sp2-znetconf-introduce-better-ways-to-locate-udevadm.patch * s390-tools-sles15sp2-mon_tools-update-udevadm-location.patch ------------------------------------------------------------------- Thu Jul 23 19:28:25 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp2-zipl-prevent-endless-loop-during-IPL.patch (bsc#1174309) zipl: prevent endless loop during secure IPL - Added s390-tools-sles15sp2-zipl-check-for-valid-ipl-parmblock-lowcore-pointer.patch (bsc#1174310) zipl: check for valid ipl parmblock lowcore pointer - Added s390-tools-sles15sp2-01-zipl-libc-libc_stop-move-noreturn-to-declaration.patch s390-tools-sles15sp2-02-zipl-stage3-correctly-handle-diag308-response-code.patch (bsc1174311) zipl: Fix KVM IPL without bootindex - Updated cputype and read_values to recognize the new z15 models. ------------------------------------------------------------------- Mon Jun 29 19:45:01 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp2-vmcp-exit-code.patch (bsc#1173481) Change the vmcp exit code and return 'CP command failed' when both "CP command failed" and "response buffer is too small" error conditions are true. ------------------------------------------------------------------- Tue Apr 7 18:52:02 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp2-01-cpumf-add-new-deflate-counters-for-z15.patch (bsc#1167853) lscpumf: New z15 CPU-MF counters not available, so add the definition for the new deflate counters. - Updated read_values (bsc#1167815, jsc#SLE-10675) * Differentiate between IBM Z and IBM LinuxONE machines * Query and print the status of secure boot for the LPAR. ------------------------------------------------------------------- Thu Mar 19 19:22:19 UTC 2020 - Mark Post <mpost@suse.com> - Added the following patches for bsc#1166850 zipl: fix secure boot config handling: * s390-tools-sles15sp2-01-zipl-Add-missing-options-to-help-output.patch * s390-tools-sles15sp2-02-zipl-allow-stand-alone-secure-option-on-command-l.patch * s390-tools-sles15sp2-03-zipl-correct-secure-boot-config-handling.patch * s390-tools-sles15sp2-04-zipl-fix-zipl.conf-man-page-example-for-secure-boot.patch - Modified the spec file so that the kernel used for the SCSI dump tool is named zfcpdump-image instead of zfcpdump_part.image. This is to match the new version of zipl that expects this new file name. (bsc#1166851) ------------------------------------------------------------------- Wed Mar 18 17:58:57 UTC 2020 - Mark Post <mpost@suse.com> - Added the following patches to implement jsc#SLE-7471, Enhanced tooling for kvm guest images (bsc#1165549): * s390-tools-sles15sp2-01-zipl-fix-Wdiscarded-qualifiers.patch * s390-tools-sles15sp2-02-zipl-fix-Waddress-of-packed-member.patch * s390-tools-sles15sp2-03-zipl-remove-some-useless-__packed___-attributes.patch * s390-tools-sles15sp2-04-zipl-Fix-entry-point-for-stand-alone-kdump.patch * s390-tools-sles15sp2-05-zipl-Fix-dependency-generation-in-zipl-boot.patch * s390-tools-sles15sp2-06-zipl-Make-use-of-__packed-macro.patch * s390-tools-sles15sp2-07-zipl-define-__section-macro-and-make-use-of-it.patch * s390-tools-sles15sp2-08-zipl-Make-use-of-__noreturn-macro.patch * s390-tools-sles15sp2-09-zipl-Define-__noinline-macro-and-make-use-of-it.patch * s390-tools-sles15sp2-10-zipl-stage3-Mark-start_kernel-__noreturn.patch * s390-tools-sles15sp2-11-zipl-sclp-Remove-duplicate-macros.patch * s390-tools-sles15sp2-12-zipl-Make-address-size-mask-macros-UL.patch * s390-tools-sles15sp2-13-zipl-libc-Use-stdint.h-instead-of-self-defined-macro.patch * s390-tools-sles15sp2-14-zipl-Consolidate-IMAGE-macros.patch * s390-tools-sles15sp2-15-zipl-Consolidate-STAGE-2-3-macros.patch * s390-tools-sles15sp2-16-zipl-stfle-use-uint64_t-instead-of-u64.patch * s390-tools-sles15sp2-17-zipl-boot-fix-comment-in-stage3.lds.patch * s390-tools-sles15sp2-18-lib-zt_common-add-STATIC_ASSERT-macro.patch * s390-tools-sles15sp2-19-zipl-use-STATIC_ASSERT-macro-for-no-padding-verifica.patch * s390-tools-sles15sp2-20-Support-lib-zt_common.h-to-be-used-in-assembler-and-.patch * s390-tools-sles15sp2-21-zipl-move-IPL-related-definitions-into-separate-head.patch * s390-tools-sles15sp2-22-zipl-move-SIGP-related-functions-and-definitions-int.patch * s390-tools-sles15sp2-23-zipl-add-SIGP_SET_ARCHITECTURE-to-sigp.h-and-use-it.patch * s390-tools-sles15sp2-24-zipl-stage3-make-IPL_DEVICE-definition-consistent-wi.patch * s390-tools-sles15sp2-25-zipl-move-Linux-layout-definitions-into-separate-hea.patch * s390-tools-sles15sp2-26-zipl-tape0-use-constants-defined-in-linux_layout.h.patch * s390-tools-sles15sp2-27-zipl-use-STAGE3_ENTRY-for-STAGE3_LOAD_ADDRESS.patch * s390-tools-sles15sp2-28-zipl-move-loaders-layout-definitions-into-separate-h.patch * s390-tools-sles15sp2-29-zipl-s390.h-rename-inline-macro-into-__always_inline.patch * s390-tools-sles15sp2-30-zipl-move-__always_inline-barrier-__pa32-pa-to-zt_co.patch * s390-tools-sles15sp2-31-zipl-make-BLK_PWRT-unsigned-int.patch * s390-tools-sles15sp2-32-Consolidate-MIN-and-MAX-macros.patch * s390-tools-sles15sp2-33-zipl-remove-libc.h-include-in-s390.h.patch * s390-tools-sles15sp2-34-zipl-move-s390.h-to-include-boot-s390.h.patch * s390-tools-sles15sp2-35-zipl-libc-include-s390.h.patch * s390-tools-sles15sp2-36-include-boot-s390.h-move-panic-and-panic_notify-to-l.patch * s390-tools-sles15sp2-37-include-boot-s390.h-fixes-for-Werror-sign-conversion.patch * s390-tools-sles15sp2-38-zipl-refactor-all-EBCDIC-code-into-separate-files.patch * s390-tools-sles15sp2-39-zipl-sclp-add-macros-for-the-control-program-masks.patch * s390-tools-sles15sp2-40-zipl-sclp-add-sclp_print_ascii.patch * s390-tools-sles15sp2-41-zipl-libc-printf-print-on-linemode-and-ASCII-console.patch * s390-tools-sles15sp2-42-Consolidate-ALIGN-__ALIGN_MASK-ARRAY_SIZE-macros.patch * s390-tools-sles15sp2-43-genprotimg-boot-initial-bootloader-support.patch * s390-tools-sles15sp2-44-genprotimg-boot-use-C-pre-processor-for-linker-scrip.patch * s390-tools-sles15sp2-45-genprotimg-add-relocator-for-stage3b.patch * s390-tools-sles15sp2-46-README.md-remove-useless-empty-line.patch * s390-tools-sles15sp2-47-include-boot-s390.h-add-guard-for-struct-__vector128.patch * s390-tools-sles15sp2-48-genprotimg-introduce-new-tool-for-the-creation-of-PV.patch - Added a BuildRequires for glib2-devel to support the new feature. - Added a %dir entry for /usr/share/s390-tools/genprotimg ------------------------------------------------------------------- Tue Mar 10 18:25:51 UTC 2020 - Mark Post <mpost@suse.com> - Added the following patches for bsc#1165978. zpcictl --reset only issues a SCLP reset and leaves the PCI function in an error state. Initiate an OS level recovery by calling /sys/bus/devices/<dev>/recover after the SCLP reset. * s390-tools-sles15sp2-01-zpcictl-Initiate-recover-after-reset.patch * s390-tools-sles15sp2-02-zpcictl-Rename-misleading-sysfs_write_data.patch * s390-tools-sles15sp2-03-zpcitctl-Exit-on-error-in-sysfs_report_error.patch ------------------------------------------------------------------- Tue Mar 3 22:11:44 UTC 2020 - Mark Post <mpost@suse.com> - The zipl boot loader may crash during boot. The solution is to implement vsnprintf and make use of it. (bsc#1165317) * s390-tools-sles15sp2-01-zipl-libc-Introduce-vsnprintf.patch * s390-tools-sles15sp2-02-zipl-libc-Fix-potential-buffer-overflow-in-printf.patch * s390-tools-sles15sp2-03-zipl-libc-Replace-sprintf-with-snprintf.patch * s390-tools-sles15sp2-04-zipl-libc-Indicate-truncated-lines-in-printf-with.patch ------------------------------------------------------------------- Tue Feb 18 20:10:50 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp2-zkey-Fix-display-of-XTS-attribute-for-validate-comma.patch (bsc#1163002). - Added s390-tools-sles15sp2-zkey-Fix-display-of-clear-key-size-for-CCA-AESCIPHER.patch (bsc#1163570). - Re-categorized s390-tools-sles15sp1-11-zdev-Do-not-call-zipl-on-initrd-update.patch from an IBM patch to a SUSE-maintained patch. (bsc#1162840) ------------------------------------------------------------------- Thu Feb 13 13:50:55 UTC 2020 - Marcus Meissner <meissner@suse.com> - sign the stage3.bin bootloader stage (bsc#1163524) ------------------------------------------------------------------- Sat Feb 8 02:25:58 UTC 2020 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp1-zdev-Also-include-the-ctc-driver-in-the-initrd.patch (bsc#1160373). - Added s390-tools-sles15sp1-11-zdev-Do-not-call-zipl-on-initrd-update.patch (bsc#1162840). - Added s390-tools-sles15sp2-zkey-Fix-listing-of-keys-on-file-systems-reporting-D.patch (bsc#1162996). - Added s390-tools-sles15sp2-zkey-Fix-display-of-clear-key-size-for-XTS-keys.patch (bsc#1163003). ------------------------------------------------------------------- Fri Oct 11 15:30:19 UTC 2019 - Mark Post <mpost@suse.com> - Upgraded to version 2.11.0 (jsc#7831) - Updated the cputype script and read_values program to recognize machine types up through the new z15. - Added the following patches (bsc#1151859) * s390-tools-sles15sp2-01-zkey-Separate-and-rework-CCA-host-library-loading.patch * s390-tools-sles15sp2-02-zkey-Move-utility-functions-into-separate-source-fil.patch * s390-tools-sles15sp2-03-zkey-Add-utility-function-to-get-the-serial-number-o.patch * s390-tools-sles15sp2-04-zkey-Add-utility-function-to-get-the-mkvp-of-a-crypt.patch * s390-tools-sles15sp2-05-zkey-add-function-to-iterate-over-all-available-CCA-.patch * s390-tools-sles15sp2-06-zkey-Add-function-to-print-the-MKVPs-of-APQNs.patch * s390-tools-sles15sp2-07-zkey-Add-function-to-cross-check-APQNs-for-valid-mas.patch * s390-tools-sles15sp2-08-zkey-Add-function-to-obtain-the-mkvp-of-a-secure-key.patch * s390-tools-sles15sp2-09-zkey-Display-MKVP-when-validating-a-secure-key.patch * s390-tools-sles15sp2-10-zkey-Cross-check-APQNs-when-generating-secure-keys.patch * s390-tools-sles15sp2-11-zkey-Cross-check-APQNs-when-validating-secure-keys.patch * s390-tools-sles15sp2-12-zkey-Cross-check-APQNs-when-importing-secure-keys.patch * s390-tools-sles15sp2-13-zkey-Cross-check-APQNs-when-changing-APQN-associatio.patch * s390-tools-sles15sp2-14-zkey-Add-function-to-select-a-specific-CCA-adapter.patch * s390-tools-sles15sp2-15-zkey-Add-function-to-select-a-CCA-adapter-by-mkvp.patch * s390-tools-sles15sp2-16-zkey-Select-CCA-adapter-when-re-enciphering.patch * s390-tools-sles15sp2-17-zkey-cryptsetup-Add-to-new-and-from-old-options.patch - Added the following patches (bsc#1151858) * s390-tools-sles15sp2-18-zkey-Display-key-type-with-list-and-validate-command.patch * s390-tools-sles15sp2-19-zkey-Allow-to-filter-list-output-by-key-type.patch * s390-tools-sles15sp2-20-zkey-Allow-to-specify-the-key-type-with-the-generate.patch * s390-tools-sles15sp2-21-zkey-Preparations-for-introducing-a-new-key-type.patch * s390-tools-sles15sp2-22-zkey-Introduce-the-CCA-AESCIPHER-key-type.patch * s390-tools-sles15sp2-23-zkey-Add-wrappers-for-the-new-IOCTLs-with-fallback-t.patch * s390-tools-sles15sp2-24-zkey-Add-helper-functions-to-build-lists-of-APQNs.patch * s390-tools-sles15sp2-25-zkey-Add-support-for-generating-AES-CIPHER-keys.patch * s390-tools-sles15sp2-26-zkey-Add-support-for-validating-AES-CIPHER-keys.patch * s390-tools-sles15sp2-27-zkey-Add-support-for-re-enciphering-AES-CIPHER-keys.patch * s390-tools-sles15sp2-28-zkey-Check-crypto-card-level-during-APQN-cross-check.patch * s390-tools-sles15sp2-29-zkey-Add-helper-function-to-query-the-CCA-firmware-v.patch * s390-tools-sles15sp2-30-zkey-Add-helper-function-to-convert-secure-keys-betw.patch * s390-tools-sles15sp2-31-zkey-Add-helper-function-to-restrict-export-of-secur.patch * s390-tools-sles15sp2-32-zkey-Add-helper-function-to-check-an-AES-CIPHER-key.patch * s390-tools-sles15sp2-33-zkey-Add-key-checks-when-importing-a-CCA-AESCIPHER-k.patch * s390-tools-sles15sp2-34-zkey-Add-convert-command-to-convert-keys-from-one-ty.patch * s390-tools-sles15sp2-35-zkey-Allow-zkey-cryptsetup-setkey-to-set-different-k.patch - Added the following patches (bsc#1153757) * s390-tools-sles15sp2-zcrypt-CEX7S-exploitation-support.patch * s390-tools-sles15sp2-zcryptstats-Add-support-for-CEX7.patch - Added s390-tools-sles15sp2-Close-file-descriptor-when-checking-for-read-only.patch - Forward-ported the following patches to work with the restructuring IBM did for this version * dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch * s390-tools-sles12-fdasd-skip-partition-check-and-BLKRRPART-ioctl.patch * s390-tools-sles15-Allow-multiple-device-arguments.patch * s390-tools-sles15-Format-devices-in-parallel.patch * s390-tools-sles15-Implement-f-for-backwards-compability.patch * s390-tools-sles15-Implement-Y-yast_mode.patch - Removed the following obsolete patches: * s390-tools-sles15-1-lstape-fix-output-with-SCSI-lin_tape-and-multiple-pa.patch * s390-tools-sles15-2-lstape-fix-to-prefer-sysfs-to-find-lin_tape-device-n.patch * s390-tools-sles15-3-lstape-fix-output-without-SCSI-generic-sg.patch * s390-tools-sles15-4-lsluns-fix-to-prevent-error-messages-if-there-are-no.patch * s390-tools-sles15-5-lstape-fix-to-prevent-error-messages-if-there-are-no.patch * s390-tools-sles15-6-lstape-fix-description-of-type-and-devbusid-filter-f.patch * s390-tools-sles15-7-lstape-fix-SCSI-output-description-in-man-page.patch * s390-tools-sles15-8-lstape-fix-SCSI-HBA-CCW-device-bus-ID-e.g.-for-virti.patch * s390-tools-sles15-cpi-add-unit-install-section.patch * s390-tools-sles15-cpuplugd-Improve-systemctl-start-error-handling.patch * s390-tools-sles15-dbginfo-add-data-for-ps-cpprot.patch * s390-tools-sles15-Drop-device_id-parameter.patch * s390-tools-sles15-Fix-truncation-warning.patch * s390-tools-sles15-Fixup-dasdfmt_get_volser.patch * s390-tools-sles15-Fixup-device-name-handling.patch * s390-tools-sles15-hmcdrvfs-fix-parsing-of-link-count.patch * s390-tools-sles15-iucvterm-include-ctype-for-toupper.patch * s390-tools-sles15-lsluns-clarify-discovery-use-case-relation-to-NPIV-a.patch * s390-tools-sles15-lsluns-complement-alternative-tools-with-lszdev.patch * s390-tools-sles15-lsluns-document-restriction-to-zfcp-only-systems.patch * s390-tools-sles15-lsluns-do-not-print-confusing-messages-when-a-filter.patch * s390-tools-sles15-lsluns-do-not-scan-all-if-filters-match-nothing.patch * s390-tools-sles15-lsluns-enhance-usage-statement-and-man-page.patch * s390-tools-sles15-lsluns-fix-flawed-formatting-of-man-page.patch * s390-tools-sles15-lsluns-point-out-IBM-Storwize-configuration-requirem.patch * s390-tools-sles15-mon_procd-fix-parsing-of-proc-pid-stat.patch * s390-tools-sles15-mon_tools-Improve-systemctl-start-error-handling.patch * s390-tools-sles15sp1-0001-zkey-Add-properties-file-handling-routines.patch * s390-tools-sles15sp1-0002-zkey-Add-build-dependency-to-OpenSSL-libcrypto.patch * s390-tools-sles15sp1-0003-zkey-Add-helper-functions-for-comma-separated-string.patch * s390-tools-sles15sp1-0004-zkey-Externalize-secure-key-back-end-functions.patch * s390-tools-sles15sp1-0005-zkey-Add-keystore-implementation.patch * s390-tools-sles15sp1-0006-zkey-Add-keystore-related-commands.patch * s390-tools-sles15sp1-0007-zkey-Create-key-repository-and-group-during-make-ins.patch * s390-tools-sles15sp1-0008-zkey-Man-page-updates.patch * s390-tools-sles15sp1-0009-zkey-let-packaging-create-the-zkeyadm-group-and-perm.patch * s390-tools-sles15sp1-0010-zkey-Update-README-to-add-info-about-packaging-requi.patch * s390-tools-sles15sp1-0011-zkey-Typo-in-message.patch * s390-tools-sles15sp1-0012-zkey-Fix-memory-leak.patch * s390-tools-sles15sp1-0013-zkey-Fix-APQN-validation-routine.patch * s390-tools-sles15sp1-0014-zkey-Fix-generate-and-import-leaving-key-in-an-incon.patch * s390-tools-sles15sp1-0015-zkey-Add-zkey-cryptsetup-tool.patch * s390-tools-sles15sp1-0016-zkey-Add-man-page-for-zkey-cryptsetup.patch * s390-tools-sles15sp1-0017-zkey-Add-build-dependency-for-libcryptsetup-and-json.patch * s390-tools-sles15sp1-0018-zkey-Add-key-verification-pattern-property.patch * s390-tools-sles15sp1-0019-zkey-Add-volume-type-property-to-support-LUKS2-volum.patch * s390-tools-sles15sp1-01-chzcrypt-Corrections-at-the-chzcrypt-man-page.patch * s390-tools-sles15sp1-01-cpumf-Add-extended-counter-defintion-files-for-IBM-z.patch * s390-tools-sles15sp1-01-lszcrypt-CEX6S-exploitation.patch * s390-tools-sles15sp1-01-util_path-add-function-to-check-if-a-path-exists.patch * s390-tools-sles15sp1-01-zcryptctl-new-tool-zcryptctl-for-multiple-zcrypt-node.patch * s390-tools-sles15sp1-01-zdev-use-libutil-provided-path-functions.patch * s390-tools-sles15sp1-01-zkey-Include-sbin-into-PATH-when-executing-commands.patch * s390-tools-sles15sp1-02-cpumf-z14-split-counter-sets-according-to-CFVN-CSVN-.patch * s390-tools-sles15sp1-02-lszcrypt-fix-date-and-wrong-indentation.patch * s390-tools-sles15sp1-02-lszcrypt-support-for-alternate-zcrypt-device-drivers.patch * s390-tools-sles15sp1-02-util_path-Add-description-for-util_path_exists.patch * s390-tools-sles15sp1-02-zdev-Prepare-for-firmware-configuration-file-support.patch * s390-tools-sles15sp1-03-cpumf-cpumf_helper-read-split-counter-sets-part-2-2.patch * s390-tools-sles15sp1-03-util_path-Make-true-false-handling-consistent-with-o.patch * s390-tools-sles15sp1-03-zdev-Add-support-for-reading-firmware-configuration-.patch * s390-tools-sles15sp1-04-cpumf-correct-z14-counter-number.patch * s390-tools-sles15sp1-04-zdev-Implement-no-settle.patch * s390-tools-sles15sp1-04-zpcictl-Introduce-new-tool-zpcictl.patch * s390-tools-sles15sp1-05-cpumf-add-missing-Description-tag-for-z13-z14-ctr-12.patch * s390-tools-sles15sp1-05-zdev-Write-zfcp-lun-udev-rules-to-separate-files.patch * s390-tools-sles15sp1-05-zpcictl-include-sys-sysmacros.h-to-avoid-minor-major.patch * s390-tools-sles15sp1-06-cpumf-correct-counter-name-for-z13-and-z14.patch * s390-tools-sles15sp1-06-zdev-Add-support-for-handling-auto-configuration-dat.patch * s390-tools-sles15sp1-06-zpcictl-Rephrase-man-page-entries-and-tool-output.patch * s390-tools-sles15sp1-07-cpumf-Add-IBM-z14-ZR1-to-the-CPU-Measurement-Facilit.patch * s390-tools-sles15sp1-07-zdev-Integrate-firmware-auto-configuration-with-drac.patch * s390-tools-sles15sp1-07-zpcictl-Use-fopen-instead-of-open-for-writes.patch * s390-tools-sles15sp1-08-zdev-Integrate-firmware-auto-configuration-with-init.patch * s390-tools-sles15sp1-08-zpcictl-Read-device-link-to-obtain-device-address.patch * s390-tools-sles15sp1-09-zdev-Implement-internal-device-attributes.patch * s390-tools-sles15sp1-09-zpcictl-Make-device-node-for-NVMe-optional.patch * s390-tools-sles15sp1-10-zdev-Implement-support-for-early-device-configuratio.patch * s390-tools-sles15sp1-10-zpcictl-Change-wording-of-man-page-and-help-output.patch * s390-tools-sles15sp1-11-zdev-Do-not-call-zipl-on-initrd-update.patch * s390-tools-sles15sp1-dbginfo-gather-nvme-related-data.patch * s390-tools-sles15sp1-qethqoat-add-OSA-Express7S-support.patch * s390-tools-sles15sp1-zcrypt-refine-lszcrypt-man-page.patch * s390-tools-sles15sp1-zdev-Also-include-the-ctc-driver-in-the-initrd.patch * s390-tools-sles15sp1-zdev-fix-qeth-BridgePort-and-VNICC-conflict-checking.patch * s390-tools-sles15sp1-zkey-Enhance-error-message-about-missing-CCA-library.patch * s390-tools-sles15-zdev-Enable-running-chzdev-from-unknown-root-devices.patch * s390-tools-sles15-zdev-Fix-zdev-dracut-module-aborting-on-unknown-root.patch * s390-tools-sles15-zdev-Use-correct-path-to-vmcp-binary.patch * s390-tools-sles15-ziomon-re-add-missing-line.patch * s390-tools-sles15-zipl-remove-invalid-dasdview-command-line-option.patch ------------------------------------------------------------------- Mon Jul 22 18:27:28 UTC 2019 - Mark Post <mpost@suse.com> - Added s390-tools-sles15sp1-ziomon-fix-utilization-data-recording-with-multi-dig.patch ziomon: fix utilization recording with multi-digit scsi hosts (bsc#1141876) ------------------------------------------------------------------- Thu Feb 21 19:38:18 UTC 2019 - mpost@suse.com - Now that IBM has the package on github, use a full source URL. - Change Pre-Req to Requires(pre) and (post), and remove dracut. - Changed the group for the hmcdrvfs package from Base:System to Base/Filesystems - Institute the %autosetup macro. - Remove erroneous %dir entry for %_unitdir - Change bash-specific "==" tests in scriptlets with a more generic "=". ------------------------------------------------------------------- Thu Feb 14 23:53:57 UTC 2019 - mpost@suse.com - Modified the spec file to add a group named cpacfstats (bsc#1123730) ------------------------------------------------------------------- Mon Jan 28 17:38:15 UTC 2019 - mpost@suse.com - Added s390-tools-sles15sp1-zcrypt-refine-lszcrypt-man-page.patch Added some explanations about the columns shown with the lszcrypt verbose output. (bsc#1123041) ------------------------------------------------------------------- Thu Jan 24 04:43:39 UTC 2019 - mpost@suse.com - Updated the spec file to regenerate the initrd in the post, postun, and poststrans scriptlets. (bsc#1112018) ------------------------------------------------------------------- Tue Jan 15 21:37:32 UTC 2019 - mpost@suse.com - Enable cryptsetup now that version 2 is included in SLES15 SP1. (Fate#325684) ------------------------------------------------------------------- Mon Jan 14 17:03:37 UTC 2019 - mpost@suse.com - Added the following two patches from IBM (bsc#1121719): * s390-tools-sles15sp1-01-zkey-Include-sbin-into-PATH-when-executing-commands.patch * s390-tools-sles15sp1-zkey-Enhance-error-message-about-missing-CCA-library.patch - Added the following patch to correct a problem with CTC network interfaces not coming up after a reboot (bsc#1119102) * s390-tools-sles15sp1-zdev-Also-include-the-ctc-driver-in-the-initrd.patch ------------------------------------------------------------------- Wed Jan 9 23:17:22 UTC 2019 - mpost@suse.com - Added s390-tools-sles15sp1-qethqoat-add-OSA-Express7S-support.patch qethqoat: add OSA-Express7S support (Fate#326805, bsc#1121222) - Modified the spec file to: (bsc#1119966) * Add a group named zkeyadm * Create directory /etc/zkey/repository * Set the permissions on /etc/zkey and /etc/zkey/repository * Added /usr/lib/modules-load.d/pkey.conf - Made numerous changes to the spec file based on the output from spec-cleaner. ------------------------------------------------------------------- Thu Dec 6 21:03:08 UTC 2018 - mpost@suse.com - Added the following patches for Fate#326825 (bsc#1113329) I/O device pre-configuration * s390-tools-sles15sp1-01-zdev-use-libutil-provided-path-functions.patch * s390-tools-sles15sp1-02-zdev-Prepare-for-firmware-configuration-file-support.patch * s390-tools-sles15sp1-03-zdev-Add-support-for-reading-firmware-configuration-.patch * s390-tools-sles15sp1-04-zdev-Implement-no-settle.patch * s390-tools-sles15sp1-05-zdev-Write-zfcp-lun-udev-rules-to-separate-files.patch * s390-tools-sles15sp1-06-zdev-Add-support-for-handling-auto-configuration-dat.patch * s390-tools-sles15sp1-07-zdev-Integrate-firmware-auto-configuration-with-drac.patch * s390-tools-sles15sp1-08-zdev-Integrate-firmware-auto-configuration-with-init.patch * s390-tools-sles15sp1-09-zdev-Implement-internal-device-attributes.patch * s390-tools-sles15sp1-10-zdev-Implement-support-for-early-device-configuratio.patch * s390-tools-sles15sp1-11-zdev-Do-not-call-zipl-on-initrd-update.patch - Removed the obsolete customize-zdev-root-update-script.patch - Replaced s390-tools-sles15-zdev-fix-qeth-BridgePort-and-VNICC-conflict-checking.patch with s390-tools-sles15sp1-zdev-fix-qeth-BridgePort-and-VNICC-conflict-checking.patch to fit the current version (bsc#1118618). ------------------------------------------------------------------- Thu Nov 29 00:03:01 UTC 2018 - mpost@suse.com - Added the following patches for Fate#326862 (bsc#1113328) zcrypt DD: introduce APQN tags to support deterministic driver binding * s390-tools-sles15sp1-01-chzcrypt-Corrections-at-the-chzcrypt-man-page.patch * s390-tools-sles15sp1-02-lszcrypt-support-for-alternate-zcrypt-device-drivers.patch - Added the following patches for Fate#326804 (bsc#1113330) Extended access controls for AP queue * s390-tools-sles15sp1-01-zcryptctl-new-tool-zcryptctl-for-multiple-zcrypt-node.patch ------------------------------------------------------------------- Tue Nov 13 19:22:01 UTC 2018 - mpost@suse.com - Added s390-tools-sles15-zdev-fix-qeth-BridgePort-and-VNICC-conflict-checking.patch (bsc#1112536) zdev: qeth BridgePort and VNICC attribute conflict - Added the following patches for Fate#326376 (bsc#1113321) PCI error reporting tool (zpcictl) * s390-tools-sles15sp1-01-util_path-add-function-to-check-if-a-path-exists.patch * s390-tools-sles15sp1-02-util_path-Add-description-for-util_path_exists.patch * s390-tools-sles15sp1-03-util_path-Make-true-false-handling-consistent-with-o.patch * s390-tools-sles15sp1-04-zpcictl-Introduce-new-tool-zpcictl.patch * s390-tools-sles15sp1-05-zpcictl-include-sys-sysmacros.h-to-avoid-minor-major.patch * s390-tools-sles15sp1-06-zpcictl-Rephrase-man-page-entries-and-tool-output.patch * s390-tools-sles15sp1-07-zpcictl-Use-fopen-instead-of-open-for-writes.patch * s390-tools-sles15sp1-08-zpcictl-Read-device-link-to-obtain-device-address.patch * s390-tools-sles15sp1-09-zpcictl-Make-device-node-for-NVMe-optional.patch * s390-tools-sles15sp1-10-zpcictl-Change-wording-of-man-page-and-help-output.patch - Added the following patches for Fate#325684 (bsc#1113323) Protected key dm-crypt key management tool (crypto) * s390-tools-sles15sp1-0001-zkey-Add-properties-file-handling-routines.patch * s390-tools-sles15sp1-0002-zkey-Add-build-dependency-to-OpenSSL-libcrypto.patch * s390-tools-sles15sp1-0003-zkey-Add-helper-functions-for-comma-separated-string.patch * s390-tools-sles15sp1-0004-zkey-Externalize-secure-key-back-end-functions.patch * s390-tools-sles15sp1-0005-zkey-Add-keystore-implementation.patch * s390-tools-sles15sp1-0006-zkey-Add-keystore-related-commands.patch * s390-tools-sles15sp1-0007-zkey-Create-key-repository-and-group-during-make-ins.patch * s390-tools-sles15sp1-0008-zkey-Man-page-updates.patch * s390-tools-sles15sp1-0009-zkey-let-packaging-create-the-zkeyadm-group-and-perm.patch * s390-tools-sles15sp1-0010-zkey-Update-README-to-add-info-about-packaging-requi.patch - Added the following patches for Fate#326390 (bsc#1113353) dm-crypt with protected keys - change master key tool * s390-tools-sles15sp1-0011-zkey-Typo-in-message.patch * s390-tools-sles15sp1-0012-zkey-Fix-memory-leak.patch * s390-tools-sles15sp1-0013-zkey-Fix-APQN-validation-routine.patch * s390-tools-sles15sp1-0014-zkey-Fix-generate-and-import-leaving-key-in-an-incon.patch * s390-tools-sles15sp1-0015-zkey-Add-zkey-cryptsetup-tool.patch * s390-tools-sles15sp1-0016-zkey-Add-man-page-for-zkey-cryptsetup.patch * s390-tools-sles15sp1-0017-zkey-Add-build-dependency-for-libcryptsetup-and-json.patch * s390-tools-sles15sp1-0018-zkey-Add-key-verification-pattern-property.patch * s390-tools-sles15sp1-0019-zkey-Add-volume-type-property-to-support-LUKS2-volum.patch - Added the following patches for Fate#325691 (bsc#1113324) Add support for new crypto hardware * s390-tools-sles15sp1-01-lszcrypt-CEX6S-exploitation.patch * s390-tools-sles15sp1-02-lszcrypt-fix-date-and-wrong-indentation.patch - Added the following patches for Fate#326388 (bsc#1113331) CPUMF Counters for z14 * s390-tools-sles15sp1-01-cpumf-Add-extended-counter-defintion-files-for-IBM-z.patch * s390-tools-sles15sp1-02-cpumf-z14-split-counter-sets-according-to-CFVN-CSVN-.patch * s390-tools-sles15sp1-03-cpumf-cpumf_helper-read-split-counter-sets-part-2-2.patch * s390-tools-sles15sp1-04-cpumf-correct-z14-counter-number.patch * s390-tools-sles15sp1-05-cpumf-add-missing-Description-tag-for-z13-z14-ctr-12.patch * s390-tools-sles15sp1-06-cpumf-correct-counter-name-for-z13-and-z14.patch * s390-tools-sles15sp1-07-cpumf-Add-IBM-z14-ZR1-to-the-CPU-Measurement-Facilit.patch - Added the following patch for Fate#326361 (bsc#1113333) Collect NVMe-related debug data * s390-tools-sles15sp1-dbginfo-gather-nvme-related-data.patch - Temporarily added "HAVE_CRYPTSETUP2=0" to the make and make install commands, because a couple of Fate requests have not been approved yet, resulting in build failure. - Added "Recommends: blktrace" to the spec file (bsc#1112855) - Changed remaining insserv references to systemd entries. - Changed the Group from the obsolete "System Environment/Base" to "System/Base." ------------------------------------------------------------------- Fri Aug 31 18:57:54 UTC 2018 - mpost@suse.com - Added the following patch to remove the call to zipl for bsc#1094354 * customize-zdev-root-update-script.patch - Modified ctc_configure to not pass a "protcol=" parameter when configuring LCS devices. (bsc#1096520) - Added the following two patches for bsc#1098069 * dbginfo.sh: Extend data collection s390-tools-sles15-dbginfo-add-data-for-ps-cpprot.patch * mon_procd: fix parsing of /proc/<pid>/stat s390-tools-sles15-mon_procd-fix-parsing-of-proc-pid-stat.patch - Added the following patches for "lstape, lsluns: handle non-zfcp; lin_tape multiple paths" (bsc#1098069) * s390-tools-sles15-1-lstape-fix-output-with-SCSI-lin_tape-and-multiple-pa.patch * s390-tools-sles15-2-lstape-fix-to-prefer-sysfs-to-find-lin_tape-device-n.patch * s390-tools-sles15-3-lstape-fix-output-without-SCSI-generic-sg.patch * s390-tools-sles15-4-lsluns-fix-to-prevent-error-messages-if-there-are-no.patch * s390-tools-sles15-5-lstape-fix-to-prevent-error-messages-if-there-are-no.patch * s390-tools-sles15-6-lstape-fix-description-of-type-and-devbusid-filter-f.patch * s390-tools-sles15-7-lstape-fix-SCSI-output-description-in-man-page.patch * s390-tools-sles15-8-lstape-fix-SCSI-HBA-CCW-device-bus-ID-e.g.-for-virti.patch ------------------------------------------------------------------- Tue Aug 7 04:44:12 UTC 2018 - mpost@suse.com - dasd_reload: Fixed several syntax errors. Changed the script to ensure that the DASD volume are actually activated in device number order. If an old 51-dasd-<ccw>.rules file is found, rename it to obsolete-51-dasd-<ccw>.rules, and use chzdev to generate a new rules file. (bsc#1103407) ------------------------------------------------------------------- Mon Aug 6 12:42:14 CEST 2018 - hare@suse.de - dasd_reload: Check for 41-dasd-<type>-<ccw>.rules in addition to the original 51-dasd-<ccw>.rules (bsc#1103407) ------------------------------------------------------------------- Fri Jul 27 17:56:14 UTC 2018 - mpost@suse.com - Removed s390 from the ExclusiveArch parameter (bsc#1102906) ------------------------------------------------------------------- Wed May 30 10:22:01 CEST 2018 - hare@suse.de - mark active_devices.txt as %config(noreplace) (bsc#1090213) ------------------------------------------------------------------- Fri Apr 6 17:44:55 UTC 2018 - mpost@suse.com - Added s390-tools-sles15-hmcdrvfs-fix-parsing-of-link-count.patch (bsc#1087452) * hmcdrvfs: fix parsing of link count >= 1000 ------------------------------------------------------------------- Thu Mar 22 21:16:00 UTC 2018 - mpost@suse.com - Modified dasd_configure script to set a return code of 8 if a DASD volume being brought online is not formatted. (bsc#1084503) ------------------------------------------------------------------- Tue Dec 12 01:01:09 UTC 2017 - mpost@suse.com - Converted the following SysV init scripts to systemd unit files and scripts (bsc#1050786): * appldata * hsnc * vmlogrdr * xpram ------------------------------------------------------------------- Thu Dec 7 23:08:31 UTC 2017 - mpost@suse.com - Added the following two patches (bsc#1071166): s390-tools-sles15-zdev-Enable-running-chzdev-from-unknown-root-devices.patch s390-tools-sles15-zdev-Fix-zdev-dracut-module-aborting-on-unknown-root.patch ------------------------------------------------------------------- Tue Dec 5 17:49:35 UTC 2017 - mpost@suse.com - Added the following patches (bsc#1070836): s390-tools-sles15-cpuplugd-Improve-systemctl-start-error-handling.patch s390-tools-sles15-mon_tools-Improve-systemctl-start-error-handling.patch s390-tools-sles15-lsluns-do-not-scan-all-if-filters-match-nothing.patch s390-tools-sles15-lsluns-do-not-print-confusing-messages-when-a-filter.patch s390-tools-sles15-lsluns-fix-flawed-formatting-of-man-page.patch s390-tools-sles15-lsluns-enhance-usage-statement-and-man-page.patch s390-tools-sles15-lsluns-clarify-discovery-use-case-relation-to-NPIV-a.patch s390-tools-sles15-lsluns-point-out-IBM-Storwize-configuration-requirem.patch s390-tools-sles15-lsluns-document-restriction-to-zfcp-only-systems.patch s390-tools-sles15-lsluns-complement-alternative-tools-with-lszdev.patch ------------------------------------------------------------------- Tue Dec 5 15:46:44 UTC 2017 - mpost@suse.com - Added "--no-root-update" to all the chzdev calls in the following scripts for bsc#1071165: ctc_configure dasd_configure qeth_configure zfcp_disk_configure zfcp_host_configure ------------------------------------------------------------------- Thu Nov 30 20:22:09 UTC 2017 - mpost@suse.com - Added the following patches (bsc#1068538) * s390-tools-sles15-cpi-add-unit-install-section.patch * s390-tools-sles15-zipl-remove-invalid-dasdview-command-line-option.patch * s390-tools-sles15-ziomon-re-add-missing-line.patch - Modified s390-tools-sles15-zdev-Use-correct-path-to-vmcp-binary.patch to point to the correct line in the common.mk file. ------------------------------------------------------------------- Thu Nov 23 13:41:27 UTC 2017 - rbrown@suse.com - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ------------------------------------------------------------------- Tue Nov 14 21:38:25 UTC 2017 - mpost@suse.com - Added "HAVE_DRACUT=1" to the make install command. This will include the new dracut support module. (bsc#1068040) ------------------------------------------------------------------- Tue Nov 14 03:19:55 UTC 2017 - mpost@suse.com - Added s390-tools-sles15-zdev-Use-correct-path-to-vmcp-binary.patch zdev: Use correct path to vmcp binary (bsc#1055909) - Modified the spec file to also install /etc/cpuplugd.conf (bsc#1066328) - Dropped installation of obsolete /etc/sysconfig/mon_statd. - Removed "-i" option from "fillup_only" macro for osasnmpd to get rid of a warning message from RPM. ------------------------------------------------------------------- Thu Nov 9 20:39:38 UTC 2017 - mpost@suse.com - Updated the cputype script to recognize the new IBM z14 processor (bsc#1049843). - Re-instated the new versions of ctc_configure, dasd_configure, qeth_configure, zfcp_disk_configure, zfcp_host_configure. ------------------------------------------------------------------- Wed Oct 25 17:21:30 UTC 2017 - mpost@suse.com - Modified s390-tools-sles15-Format-devices-in-parallel.patch to reset the rc variable before using it again (bsc#1063393). - Reverted the changes to the *_configure scripts until bsc#1064791 is fixed. ------------------------------------------------------------------- Mon Oct 23 23:41:51 UTC 2017 - mpost@suse.com - Replaced the following SUSE-written scripts with wrappers that call the IBM-provided chzdev command in s390-tools. (Fate#322268) * ctc_configure * dasd_configure * qeth_configure * zfcp_disk_configure * zfcp_host_configure ------------------------------------------------------------------- Wed Oct 18 16:22:27 UTC 2017 - mpost@suse.com - Deleted s390-tools-sles12-pardasdfmt.patch and replaced it with the following patches (bsc#1063393): * s390-tools-sles15-Allow-multiple-device-arguments.patch * s390-tools-sles15-Drop-device_id-parameter.patch * s390-tools-sles15-Fixup-dasdfmt_get_volser.patch * s390-tools-sles15-Fixup-device-name-handling.patch * s390-tools-sles15-Format-devices-in-parallel.patch * s390-tools-sles15-Implement-f-for-backwards-compability.patch * s390-tools-sles15-Implement-Y-yast_mode.patch - Reworked dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch to fit on top of replacement patches. - Cleaned up the patch headers for the following: * s390-tools-sles12-sysconfig-compatible-dumpconf.patch * s390-tools-sles12-update-by_id-links-on-change-and-add-action.patch - Added the following patches: * s390-tools-sles15-Fix-truncation-warning.patch * s390-tools-sles15-iucvterm-include-ctype-for-toupper.patch - Removed redundant %clean section. Replaced old RPM variables. - Removed %service* macros for iucvtty-login@.service and ttyrun-getty@.service since systemd complained about them. - Replaced all fillup_and_insserv macros with fillup_only since we weren't running the "insserv" part anyway. ------------------------------------------------------------------- Thu Oct 5 20:47:52 UTC 2017 - mpost@suse.com - Modified mkdump perl script to work with the updated version of the IBM tools dasdview, zipl and zgetdump. (bsc#1020336). Also changed the method used to determine the maximum dump size for SCSI devices. ------------------------------------------------------------------- Wed Oct 4 19:45:29 UTC 2017 - mpost@suse.com - Upgraded to version 2.1.0 (Fate#323291). Changes from 2.0.0 to 2.1.0 * Added the following tools: netboot: Scripts for building a PXE-style netboot image for KVM 90-cpi.rules/cpictl: New udev rule to update CPI when KVM is used * Modified lsqeth/zdev to add VNIC Characteristics support Bug fixes * chzcrypt: Corrected handling of insufficient permissions * cpacfstats: Add size setting to perf event * fdasd: Skip partition check with the force option * ttyrun: Fix deprecated BindTo usage in ttyrun-getty@.service.in * lszcrypt: Fix core dump caused by stack overwrite * lszcrypt: Fix random domain printout when no config available * zdev: Fix segfault with unknown qeth attribute * zdev: Fix IPv6 NDP proxy description * zdev: Fix zdev dracut module temp file location * zkey: Correctly detect abbreviated commands * zkey: Validate XTS key: ignore domain and card * zkey: Use octal values instead of S_IRWX* constants * zkey: Properly set umask to prohibit permissions to group and others * zkey: Add -ldl to LDLIBS (not LDFLAGS) * znetconf: Re-add missing line in lsznet.raw * Fix several gcc 7 warnings - Modified s390-tools-sles12-fdasd-skip-partition-check-and-BLKRRPART-ioctl.patch to apply cleanly to this version. - Removed the following obsolete patches: * s390-tools-sles15-zgetdump-Fix-gcc-7-warning.patch * s390-tools-sles15-lscss-Get-rid-of-gcc-7-buffer-truncation-warnings.patch * s390-tools-sles15-Get-rid-of-gcc-7-fall-through-warnings.patch * s390-tools-sles15-lszcrypt-Fix-core-dump-caused-by-stack-overwrite.patch * s390-tools-sles15-dasdinfo-Fix-GCC-7-overflow-warning.patch ------------------------------------------------------------------- Thu Sep 8 21:06:37 UTC 2017 - mpost@suse.com - Added the following patches (bsc#1056498) - s390-tools-sles15-zgetdump-Fix-gcc-7-warning.patch - s390-tools-sles15-lscss-Get-rid-of-gcc-7-buffer-truncation-warnings.patch - s390-tools-sles15-Get-rid-of-gcc-7-fall-through-warnings.patch - s390-tools-sles15-lszcrypt-Fix-core-dump-caused-by-stack-overwrite.patch - s390-tools-sles15-dasdinfo-Fix-GCC-7-overflow-warning.patch ------------------------------------------------------------------- Tue Sep 8 20:01:35 UTC 2017 - mpost@suse.com - Upgraded to version 2.0.0 (Fate#323291). - Changes from 1.34.0 to 1.35.0 - cpuplugd: Make default config file location more distribution agnostic Add systemd service unit to start/stop the cpuplug daemon Add force-reload action to init script for LSB-compliance - mon_statd: Add force-reload action to init script for LSB-compliance - chiucvallow: corrected verification return code - lczdev/chzdev: Add support for resolving iSCSI block devices Bug fixes - chzdev, lszdev: Fix incorrect zfcp module parameter name - chreipl: Fix chreipl node for virtio devices - libus2s: Fix busid parsing - zipl/boot: Fix failed start subchannel in FBA loader - Changes from 1.35.0 to 1.36.0 - chzdev/lszdev: Add device resolution for vlan and bonding devices - dasdfmt: Add quick format support - lsdasd/fdasd/dasdfmt/zdsfs: Add query host access to volume support - zfcpdbf: Make timestamp the first field in record output Exclude Payload hex field from log message record output Add Area field to record output Add missing header fields to area record output Print the Record id field for Area area class records Mark oldest and newest trace area records Mark oldest and newest def_err pseudo area records Mark oldest and newest foreign area records Mark oldest and newest log message records Add a warning about low resolution timestamps Add Trace Area Statistics table to script output Add time zone command line option Add collection of domain xml files Bug fixes - zfcpdbf: Move and fix CPU id field output to print_header function Include microseconds in warning threshold calculation Fix parsing of precise syslog timestamps Fix labels for REC ERP action status and ERP step fields - Changes from 1.36.0 to 1.36.1 - zfcpdbf: Support basic HBA record type without warning Restore tracing of handle for port and LUN with HBA records Print full payload for all SAN traces (req, resp, iels) Print payload length everywhere applicable Disambiguate printing of payload record content Bug fixes - fdasd: Prevent buffer overflow - znetconf: Fix detection of chpids as OSX instead of OSM - Changes from 1.36.1 to 1.37.0 - Added dump2tar: sysfs collection helper for dbginfo.sh - qethconf: Remove check for OSN-device - znetconf: Remove OSN-support - lsdasd/tunedasd: Add channel path aware erp - zcrypt: Add multi domain support for zcrypt device driver - scm: Reimplement lsscm in C - chp: Reimplement chchp and lschp in C - dbginfo.sh: Make use of sysinfo collection helper Bug fixes - zfcpdbf: Only cap SAN short payload if pl_len exists - chzdev: Fix bug when configuring QETH devices - libu2s: Prevent buffer overflow - ziomon: No blktrace kill which can corrupt kernel blktrace state - Changes from 1.37.0 to 1.37.1 - dbginfo.sh: Add Docker debug data Bug fixes - lsdasd: Replace continue with return - lscss: Allow to specify devices from subchannel set 3 - mon_fsstatd: Only use physical filesystems Fix double free in error path - mon_procd: Fix segmentation fault - Changes from 1.37.1 to 1.38.0 - systemd: Add new units for cpi, dumpconf, mon_fsstatd, and mon_procd - fdasd: Add new command action 'l' to list known partition types - chmem: Try to online memory to zone movable Starting with kernel 4.13 (commit f1dd2cd1), the default zone for hotplug memory is changed from zone movable to zone normal. In order to preserve the previous default behaviour, chmem will now always try to set memory online to the zone movable, before trying to set it online to the default zone. - zfcpdbf: Print high part of "new" 64 bit SCSI LUN Print payload with full FCP_RSP IU in SCSI trace records - util_opt: Add command specific command line parsing - util_rec: Implement util_rec_iterate() function - util_rec: Record field values can be stored and processed in argz format Bug fixes - zipl/zgetdump: Add missing SCSI multipath dump information to man pages - lsqeth: Fix attributes name: ipa -> ipa_takeover and parp -> rxip Fix lsqeth output of ipa/vipa/rxip addresses of interfaces - zfcpdbf: Fix payload length for zfcp_dbf_hba_bit_err - chzdev: Add implicit qeth layer settings handling - qethqoat: Fix OSA 6S detection - Changes from 1.38.0 to 2.0.0 (also known as 1.39.0) - IBM changed the license to MIT. - Added zkey: Generate, re-encipher, and validate secure AES keys - cpumf: Add hardware counters for z13 and z13s - lscss: Reimplement lscss script in C - lsqeth: Reimplement lsqeth script in C Bug fixes - lscpumf: Fix Perl warnings - Removed the following obsolete patches: s390-tools-sles12sp2-chiucvallow-verify.patch s390-tools-sles12sp2-chreipl-virtio.patch s390-tools-sles12sp2-chzdev-disable-root-update.patch s390-tools-sles12sp2-feat-01-dasd-query-host.patch s390-tools-sles12sp2-lscss-allow-to-specify-devices-from-ssid-3.patch s390-tools-sles12sp2-zipl-fix-failed-start-subchannel.patch s390-tools-sles12sp3-chmem-try-to-online-zone-movable.patch s390-tools-sles12sp3-dasdfmt-01-Fix-behaviour-of-t-combined-with-y.patch s390-tools-sles12sp3-dasdfmt-02-Fix-trailing-whitespace.patch s390-tools-sles12sp3-dasdfmt-03-Apply-coding-convention.patch s390-tools-sles12sp3-dasdfmt-04-Use-enhanced-DASD-information.patch s390-tools-sles12sp3-dasdfmt-05-Refactor-do_format_dasd.patch s390-tools-sles12sp3-dasdfmt-06-Make-the-IOCTL-BLKSSZGET-reusable.patch s390-tools-sles12sp3-dasdfmt-07-Add-quick-format-support.patch s390-tools-sles12sp3-dasdfmt-08-Make-progress-output-reusable-and-add-ETR.patch s390-tools-sles12sp3-dasdfmt-09-Add-command-line-argument-check.patch s390-tools-sles12sp3-dasdfmt-10-Add-expand-format-mode.patch s390-tools-sles12sp3-dbginfo-01-libutil-Add-utility-functions.patch s390-tools-sles12sp3-dbginfo-02-dump2tar-Add-sysfs-collection-helper-for-dbginfo.sh-v2.patch s390-tools-sles12sp3-dbginfo-03-dbginfo.sh-Make-use-of-sysinfo-collection-helper.patch s390-tools-sles12sp3-dbginfo-Collect-docker-debug-data.patch s390-tools-sles12sp2-libu2s-Fix-busid-parsing.patch s390-tools-sles12sp3-lsdasd-tunedasd-Add-channel-path-aware-erp.patch s390-tools-sles12sp3-mon_fsstatd-fix-double-free-in-error-path-and-skip-virtual-fs.patch s390-tools-sles12sp3-util_proc-fix-memory-allocation-error-messages.patch s390-tools-sles12sp3-ziomon-no-blktrace-kill-which-can-corrupt-kernel-blk.patch - Added s390-tools-sles15-add--ldl-to-LDLIBS.patch to fix a problem with zkey/Makefile. ------------------------------------------------------------------- Thu Sep 7 19:41:39 UTC 2017 - mpost@suse.com - Temporarily added BuildIgnore: gcc-PIE to the spec file to avoid a problem with zipl not working. (bsc#1055343) ------------------------------------------------------------------- Wed Jul 12 18:14:13 UTC 2017 - mpost@suse.com - Added s390-tools-sles12sp3-chmem-try-to-online-zone-movable.patch (bsc#1048363). ------------------------------------------------------------------- Mon Jul 3 17:29:19 CEST 2017 - ro@suse.de - Remove lsmem and chmem and their manpages from the package, both tools have been added to util-linux-2.30 ------------------------------------------------------------------- Wed May 31 21:26:50 UTC 2017 - mpost@suse.com - Made a number of modification to zpxe.rexx to - Made several hard-coded values variables. - Make it more obvious which default values can be modified - Increased the default size of the FFFF VDISK (bsc#1038255) - Don't execute the wait if "debug" was specified as a parm. - Change nodebug variable name to debug for clarity, updated logic as needed. ------------------------------------------------------------------- Tue May 16 00:57:05 UTC 2017 - mpost@suse.com - Added s390-tools-sles12sp3-ziomon-no-blktrace-kill-which-can-corrupt-kernel-blk.patch (bsc#1038861) ------------------------------------------------------------------- Tue Apr 18 22:25:10 UTC 2017 - mpost@suse.com - Due to the change to qclib packaging, change BuildRequires from qclib-devel to qclib-devel-static. ------------------------------------------------------------------- Wed Feb 22 20:29:57 UTC 2017 - mpost@suse.com - Added the following patches (bsc#1026474) - s390-tools-sles12sp3-mon_fsstatd-fix-double-free-in-error-path-and-skip-virtual-fs.patch - s390-tools-sles12sp3-dbginfo-Collect-docker-debug-data.patch ------------------------------------------------------------------- Mon Feb 20 17:05:45 UTC 2017 - mpost@suse.com - Added s390-tools-sles12sp3-util_proc-fix-memory-allocation-error-messages.patch (bsc#1025247) ------------------------------------------------------------------- Thu Feb 16 21:06:41 UTC 2017 - mpost@suse.com - Added the following patches for Fate # 322377: - s390-tools-sles12sp3-dbginfo-01-libutil-Add-utility-functions.patch - s390-tools-sles12sp3-dbginfo-02-dump2tar-Add-sysfs-collection-helper-for-dbginfo.sh-v2.patch - s390-tools-sles12sp3-dbginfo-03-dbginfo.sh-Make-use-of-sysinfo-collection-helper.patch - Added the following patches for Fate # 322374: - s390-tools-sles12sp3-lsdasd-tunedasd-Add-channel-path-aware-erp.patch - Added the following patches for Fate # 321643: - s390-tools-sles12sp3-dasdfmt-01-Fix-behaviour-of-t-combined-with-y.patch - s390-tools-sles12sp3-dasdfmt-02-Fix-trailing-whitespace.patch - s390-tools-sles12sp3-dasdfmt-03-Apply-coding-convention.patch - s390-tools-sles12sp3-dasdfmt-04-Use-enhanced-DASD-information.patch - s390-tools-sles12sp3-dasdfmt-05-Refactor-do_format_dasd.patch - s390-tools-sles12sp3-dasdfmt-06-Make-the-IOCTL-BLKSSZGET-reusable.patch - s390-tools-sles12sp3-dasdfmt-07-Add-quick-format-support.patch - s390-tools-sles12sp3-dasdfmt-08-Make-progress-output-reusable-and-add-ETR.patch - s390-tools-sles12sp3-dasdfmt-09-Add-command-line-argument-check.patch - s390-tools-sles12sp3-dasdfmt-10-Add-expand-format-mode.patch ------------------------------------------------------------------- Wed Feb 1 22:00:35 UTC 2017 - mpost@suse.com - Added s390-tools-sles12sp2-lscss-allow-to-specify-devices-from-ssid-3.patch (bsc#1023022) ------------------------------------------------------------------- Wed Dec 14 16:09:52 UTC 2016 - Thomas.Blume@suse.com - cio_ignore.service: change After dependency to local-fs.target to Before and remove Wants dependency (bsc#965263) ------------------------------------------------------------------- Fri Sep 30 16:48:03 UTC 2016 - mpost@suse.com - Added s390-tools-sles12sp2-chzdev-disable-root-update.patch (bsc#1002188) - Updated cputype to recognize z13s processors. - Updated boot.cpi to redirect stderr to /dev/null when trying to set the CPI parameters. (bsc#997479) ------------------------------------------------------------------- Wed Jul 20 19:03:26 UTC 2016 - mpost@suse.com - Added s390-tools-sles12sp2-chreipl-virtio.patch (bsc#989797) chreipl/virtio: fix chreipl node for virtio-blk disks ------------------------------------------------------------------- Fri Jul 1 16:37:29 UTC 2016 - mpost@suse.com - Added s390-tools-sles12sp2-zipl-fix-failed-start-subchannel.patch (bsc#987385) - Modified lgr_check script to do a better job of checking: - Disconnected state of the guest - Whether a 3270 terminal is active - Tape ASSIGNment ------------------------------------------------------------------- Tue May 24 17:51:02 UTC 2016 - mpost@suse.com - Added the following files for Fate#318552 and Fate#320123 - detach_disks - killcdl - lgr_check - sysconfig.virtsetup - virtsetup.service - virtsetup.sh - Added the following two patches (bsc#981427) - s390-tools-sles12sp2-chiucvallow-verify.patch - s390-tools-sles12sp2-libu2s-Fix-busid-parsing.patch - Some spec file cleanup of macro calls. ------------------------------------------------------------------- Wed May 18 20:04:10 UTC 2016 - mpost@suse.com - Added s390-tools-sles12-fdasd-skip-partition-check-and-BLKRRPART-ioctl.patch (bsc#931634). ------------------------------------------------------------------- Fri Apr 22 17:20:49 UTC 2016 - mpost@suse.com - Modified 59-zfcp-compat rules to include continuation characters on rules that are continued across multiple lines (bsc#972110) - Added 59-dasd.rules-wait_for.patch (bsc#972110) - Don't install 60-readahead.rules (bsc#972110) - Removed redundant architecture check from the %prep section - Removed various %service_* calls for iucvtty-login@.service and ttyrun-getty@.service because they generate "unit name is not valid" messages from systemctl. ------------------------------------------------------------------- Wed Mar 23 21:21:39 UTC 2016 - mpost@suse.com - Upgraded to version 1.34.0 Added libpfm-devel to the list of BuildRequires Removed references to chzdev that was never implemented by IBM - Added 59-zfcp-compat.rules (bsc#972110) - Removed the following obsolete scripts/files mkinitrd-boot-dasd.sh mkinitrd-boot-qeth.sh mkinitrd-boot-zfcp.sh mkinitrd-setup-dasd.sh mkinitrd-setup-qeth.sh mkinitrd-setup-zfcp.sh zfcpdump.config - Added s390-tools-sles12sp2-feat-01-dasd-query-host.patch (Fate#319604) - Reworked s390-tools-sles12-pardasdfmt.patch to fit. - Reworked dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch to fit. - Added file /etc/modprobe.d/90-s390-tools.conf to ensure dasd_diag_mod and dasd_fba_mod kernel modules get loaded together (bsc#966477). - Updated zfcp_san_disc so that breaking out of it won't leave "well known LUNs" in use preventing others from using them. (bsc#961372) - Removed the following obsolete patches s390-tools-sles12-cpuplugd-allow-more-than-64-CPUs.patch s390-tools-sles12-dasdstat-avoid-inconsistent-data.patch s390-tools-sles12-dbginfo-collect-journalctl.patch s390-tools-sles12-dbginfo-libvirt-multipath-extension.patch s390-tools-sles12-dbginfo-option-for-output-directory.patch s390-tools-sles12-dbginfo-q-v-nic.patch s390-tools-sles12-dbginfo-systemd-data-collection.patch s390-tools-sles12-dumpconf-fix-delay-minutes.patch s390-tools-sles12-init-scripts-do-not-use-subsys.patch s390-tools-sles12-ipl_tools-fcp-loadparm.patch s390-tools-sles12-lsqeth-put-grep-regex-in-quotes.patch s390-tools-sles12-lsreipl-fix-fcp-reipl-type.patch s390-tools-sles12-lszcrypt-ep11-support.patch s390-tools-sles12-qetharp-iface-arg-limit.patch s390-tools-sles12-qetharp-q-format.patch s390-tools-sles12-qethqoat-and-qetharp-return-codes-fixed.patch s390-tools-sles12-qethqoat-fix-buffer-overflow-for-interface-parameter.patch s390-tools-sles12-remove-FBA-detection-for-virtblk-devices.patch s390-tools-sles12-systemd-iucvterm-units.patch s390-tools-sles12-ziorep-busid-fix.patch s390-tools-sles12-zipl-dump-part-check.patch s390-tools-sles12-zipl-fix-kernel-parameter-line.patch s390-tools-sles12-zipl-fix-parmline-zero-termination.patch s390-tools-sles12-znetconf-r-format.patch s390-tools-sles12sp1-cmsfs-fuse-time-fix.patch s390-tools-sles12sp1-feat-01-hyptop-diag0c.patch s390-tools-sles12sp1-feat-02-hyptop-lpar-smt.patch s390-tools-sles12sp1-feat-03-zipl-mt-dump.patch s390-tools-sles12sp1-feat-04-zipl-zgetdump-simd-dump.patch s390-tools-sles12sp1-feat-05-cpumf.patch s390-tools-sles12sp1-feat-06-lscpumf-disp-ctrs.patch s390-tools-sles12sp1-feat-07-lscpumf-cf-sf-check.patch s390-tools-sles12sp1-feat-08-chreipl-support-virtio_ccw.patch s390-tools-sles12sp1-feat-09-lsqeth_display_switch_attrs.patch s390-tools-sles12sp1-feat-10-qethqoat_OSA_Express_5S_support.patch s390-tools-sles12sp1-feat-11-lszcrypt-CEX5S-support.patch s390-tools-sles12sp1-feat-12-hmcdrvfs.patch s390-tools-sles12sp1-lsluns-check-fcp-device-state.patch s390-tools-sles12sp1-lszfcp-incorrect-device-types.patch s390-tools-sles12sp1-znetconf-check-ccwgroup-devices-fix.patch ------------------------------------------------------------------- Fri Nov 6 18:59:20 UTC 2015 - mpost@suse.com - Added 59-prng.rules so that /dev/prandom will have permissions of 0444. This will allow anyone to access the CPACF hardware pseudo-random number generator. (bsc#946349) - Updated the comments in 59-graf.rules to reflect the correct location for the rule to be installed. ------------------------------------------------------------------- Fri Nov 6 00:27:17 UTC 2015 - mpost@suse.com - Modified dasd_reload to take HyperPAV alias devices offline before the "normal" DASD and base devices, and then activate the "normal" DASD and base devices before the alias devices. (bsc#942373). ------------------------------------------------------------------- Fri Oct 30 22:47:12 UTC 2015 - mpost@suse.com - Updated read_values.c to point to the location IBM's makefile for qclib puts the include file. (bsc#951518). - Added a filter to s390-tools-rpmlintrc to mask a warning about read_values being statically linked. This was intentional since we didn't want to include the qclib-devel shared library in the distribution since this is the only programt that uses qclib-devel. ------------------------------------------------------------------- Fri Oct 23 16:12:53 CEST 2015 - hare@suse.de - Updated zfcp_host_configure to return '10' if the system is set up for automatic LUN scanning (bsc#951547) ------------------------------------------------------------------- Tue Oct 13 21:51:59 UTC 2015 - mpost@suse.com - Replaced read_values.c with a newer version that uses the query capacity library (qclib) from IBM. (FATE#319342) ------------------------------------------------------------------- Wed Sep 9 17:55:19 UTC 2015 - mpost@suse.com - Updated s390-tools-sles12-pardasdfmt.patch to fix error messages that didn't have a "\n" on the end. (bsc#940818) - Updated the spec file to install 40-z90crypt.rules into /usr/lib/udev/rules.d/ (bsc#943777) - Added the following patches from IBM (bsc#944390) - s390-tools-sles12sp1-lszfcp-incorrect-device-types.patch lszfcp: display of incorrect device types - s390-tools-sles12sp1-znetconf-check-ccwgroup-devices-fix.patch znetconf: cannot handle that no device is there - s390-tools-sles12sp1-lsluns-check-fcp-device-state.patch lsluns: do not scan FCP devices no longer online or in bad state - s390-tools-sles12sp1-cmsfs-fuse-time-fix.patch cmsfs-fuse: Fix time stamp handling for data sets ------------------------------------------------------------------- Wed Jul 22 19:17:39 UTC 2015 - mpost@suse.com - Removed s390-tools-sles12sp1-feat-13-lsdasd-add-path-information.patch at the request of IBM. To be re-introduced for SLES12 SP2. - Added s390-tools-sles12-dumpconf-fix-delay-minutes.patch (bsc#939054) ------------------------------------------------------------------- Wed Jun 17 21:28:15 UTC 2015 - mpost@suse.com - Split out the SE/HMC file access pieces into a new sub-package (bsc#934372). ------------------------------------------------------------------- Thu Jun 11 22:07:37 UTC 2015 - mpost@suse.com - Added the following feature updates for SLES12 SP1 - s390-tools-sles12sp1-feat-01-hyptop-diag0c.patch (bsc#934359, Fate#318069) hyptop: Exploit diag 0c data - s390-tools-sles12sp1-feat-02-hyptop-lpar-smt.patch (bsc#934324, Fate#318054) hyptop: Support for SMT (SMT base support) - s390-tools-sles12sp1-feat-03-zipl-mt-dump.patch (bsc#934371, Fate#318047) zipl: Add MT dump support for zipl dump tools - s390-tools-sles12sp1-feat-04-zipl-zgetdump-simd-dump.patch (bsc#934360, Fate#318057) zipl: Add vector register support - Add support for hardware sampling to the perf tool (bsc#934321, Fate#318025) - s390-tools-sles12sp1-feat-05-cpumf.patch s390/perf: add support for the CPU-measurement sampling Facility - s390-tools-sles12sp1-feat-06-lscpumf-disp-ctrs.patch cpumf: display counters only if the facility is available - s390-tools-sles12sp1-feat-07-lscpumf-cf-sf-check.patch cpumf: lscpumf erroneously reports sampling support - s390-tools-sles12sp1-feat-08-chreipl-support-virtio_ccw.patch (bsc#934370, Fate#318962) zipl/chreipl: Basic guest support for KVM hypervisors - s390-tools-sles12sp1-feat-09-lsqeth_display_switch_attrs.patch (bsc#934364, Fate#318473) lsqeth: Add support for switch port attributes - s390-tools-sles12sp1-feat-10-qethqoat_OSA_Express_5S_support.patch (bsc#934350, Fate#318033) qethqoat: OSA-Express5S Support - s390-tools-sles12sp1-feat-11-lszcrypt-CEX5S-support.patch (bsc#934325, Fate#318044) lszcrypt: Add support for CEX5S crypto adapters. - s390-tools-sles12sp1-feat-12-hmcdrvfs.patch (bsc#934372, Fate#318067) hmcdrvfs: SE/HMC file access - s390-tools-sles12sp1-feat-13-lsdasd-add-path-information.patch (bsc#934352, Fate#318031) lsdasd: add path information ------------------------------------------------------------------- Thu Apr 23 20:54:09 UTC 2015 - mpost@suse.com - Added three IBM patches (bsc#924973) - s390-tools-sles12-dbginfo-libvirt-multipath-extension.patch dbginfo.sh: Extend data collection for libvirt and multipath - s390-tools-sles12-dbginfo-q-v-nic.patch dbginfo.sh: Query virtual network settings for VM guests - s390-tools-sles12-ziorep-busid-fix.patch ziomon/ziorep: fix wrong assumption of 0.0.xxxx busids ------------------------------------------------------------------- Wed Mar 11 19:27:33 UTC 2015 - mpost@suse.com - Updated the cputype script to recognize the new z13 processor. - Modified read_values.c to handle additional values from /proc/sysinfo and redirect an error message to stderr (bsc#919293) - Modified read_values.c to convert as much German to English as I could - Added read_values.8 man page (bsc#919293) - Added s390-tools-sles12-dasdstat-avoid-inconsistent-data.patch (bsc#920363) dasdstat: avoid inconsistent data due to multiple reads/seeks - Added s390-tools-sles12-qethqoat-and-qetharp-return-codes-fixed.patch (bsc#920363) qethqoat and qetharp: return codes fixed ------------------------------------------------------------------- Mon Jan 19 18:53:34 UTC 2015 - mpost@suse.com - Added s390-tools-sles12-zipl-dump-part-check.patch (bsc#909524) zipl dump tools: Fix end of partition check ------------------------------------------------------------------- Wed Dec 10 22:36:09 UTC 2014 - mpost@suse.com - Added three IBM patches (bsc#903048) - s390-tools-sles12-dbginfo-option-for-output-directory.patch dbginfo.sh: Add option to specify directory for data collection - s390-tools-sles12-dbginfo-systemd-data-collection.patch dbginfo.sh: Improve data collection for systemd and lsdasd - s390-tools-sles12-cpuplugd-allow-more-than-64-CPUs.patch cpuplugd: allow more than 64 CPUs ------------------------------------------------------------------- Thu Sep 4 19:01:52 UTC 2014 - mpost@suse.com - Modified zfcp_host_configure to write udev rules and update /boot/zipl/active_devices.txt even if the HBA is already online. (bnc#894229) - Modified zfcp_san_disc to properly filter for remote ports. (bnc#868494) ------------------------------------------------------------------- Wed Sep 3 17:08:55 UTC 2014 - mpost@suse.com - Added %conf /boot/zipl/active_devices.txt to the spec file. (bnc#894480) ------------------------------------------------------------------- Wed Sep 3 01:43:27 CEST 2014 - ro@suse.de - sanitize release line in specfile ------------------------------------------------------------------- Tue Sep 2 17:13:38 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-ipl_tools-fcp-loadparm.patch (bnc#894071) ipl_tools: Add missing SCSI loadparm support ------------------------------------------------------------------- Mon Aug 18 20:46:11 UTC 2014 - mpost@suse.com - Added read_values to the package (Fate#313462). Changed license from GPL-2.0+ to "GPL-2.0+ and BSD2c" (BSD 2-Clause License) to account for the new command. ------------------------------------------------------------------- Wed Aug 13 16:08:27 UTC 2014 - mpost@suse.com - Modified dasd_reload script to deactivate any MD arrays before trying to take any DASD offline. (bnc#876570) ------------------------------------------------------------------- Mon Aug 11 16:01:12 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-zipl-fix-parmline-zero-termination.patch (bnc#891090) zipl: fix zero termination of parmline ------------------------------------------------------------------- Mon Jul 28 17:03:39 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-init-scripts-do-not-use-subsys.patch (bnc#888592) init scripts: Do not use /var/lock/subsys ------------------------------------------------------------------- Fri Jul 25 14:23:02 CEST 2014 - hare@suse.de - Fixup script issues in zfcp_san_disc (bnc#868494) ------------------------------------------------------------------- Tue Jul 22 18:08:29 UTC 2014 - mpost@suse.com - Updated %post script to remove the warning about running zipl after installing this package. That hasn't been necessary for quite a while. (bnc#888248) ------------------------------------------------------------------- Fri Jul 11 11:25:53 UTC 2014 - mpost@suse.com - Implement cio_ignore.service (bnc#882685, bnc#886833) Added cio_ignore.service and setup_cio_ignore.sh Fixup dependencies for cio_ignore service Fixup setup_cio_ignore.sh to correctly enable devices - Added s390-tools-sles12-remove-FBA-detection-for-virtblk-devices.patch (bnc#883989) zipl: remove heuristic FBA detection for virtblk devices - Updated mkdump script (bnc#884786): - Don't create a file system on SCSI disks - Use GPT partition tables instead of MSDOS to allow dumps > 2TB - Use "zipl -d" instead of "zipl -D" for partition dumping - Added a check for the existence of /boot/zipl/active.devices.txt before trying to write to it in: ctc_configure, dasd_configure, qeth_configure, and zfcp_host_configure. - Modified zfcp_host_configure to completely take the HBA offline (bnc#872229). ------------------------------------------------------------------- Wed Jul 9 14:57:31 UTC 2014 - jjolly@suse.com - Now obtaining zfcpdump-part.image from kernel-zfcpdump package ------------------------------------------------------------------- Mon Jun 16 17:13:39 UTC 2014 - mpost@suse.com - Added a "udevadm settle" command to qeth_configure. ------------------------------------------------------------------- Mon Jun 16 13:40:05 CEST 2014 - pth@suse.de - Merge the work of John and Mark. ------------------------------------------------------------------- Fri Jun 13 23:34:58 UTC 2014 - mpost@suse.com - Updated the following scripts to add tracking for the devices configured on the system for the cio_ignore kernel parameter: - ctc_configure - dasd_configure - qeth_configure - zfcp_host_configure - Added an empty /boot/zipl/active_devices.txt file for the tracking function (bnc#874902). ------------------------------------------------------------------- Fri Jun 13 19:33:51 UTC 2014 - jjolly@suse.com - zfcpdump.config - Configuration for zfcpdump kernel build - series.conf - Added kernel build and removed post and postun scripting to copy image ------------------------------------------------------------------- Thu Jun 12 16:27:10 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-lsqeth-put-grep-regex-in-quotes.patch. (bnc#877138) lsqeth: put grep regex in quotes ------------------------------------------------------------------- Wed May 28 20:25:49 UTC 2014 - mpost@suse.com - Add s390-tools-sles12-qethqoat-fix-buffer-overflow-for-interface-parameter.patch qethqoat: buffer overflow (bnc#880378) ------------------------------------------------------------------- Tue May 13 19:45:59 UTC 2014 - mpost@suse.com - Removed all the patches related to the persistent device configuration tools. The feature in FATE was withdrawn. s390-tools-sles12-chzdev-creates-invalid-zFCP-udev-rules.patch s390-tools-sles12-chzdev-fails-to-configure-IUCV.patch s390-tools-sles12-chzdev-fails-to-group-layer-3-nics.patch s390-tools-sles12-chzdev-fix-output.patch s390-tools-sles12-chzdev-Improved-error-handling.patch s390-tools-sles12-chzdev-lszdev-Compilation-warnings.patch s390-tools-sles12-chzdev-lszdev-new-tools.1.patch s390-tools-sles12-chzdev-lszdev-new-tools.2.patch s390-tools-sles12-chzdev-lszdev-new-tools.3.patch s390-tools-sles12-chzdev-lszdev-new-tools.4.patch s390-tools-sles12-chzdev-lszdev-new-tools.5.patch s390-tools-sles12-chzdev-lszdev-new-tools.6.patch s390-tools-sles12-chzdev-lszdev-new-tools.7.patch s390-tools-sles12-chzdev-lszdev-restore-makefile.patch s390-tools-sles12-chzdev-lszdev-temp-fix.patch s390-tools-sles12-chzdev-lszdev-temporary-makefile-revert.patch s390-tools-sles12-chzdev-lun-and-wwpn-now-must-be-16-hex-digits.patch s390-tools-sles12-chzdev-missing-online.patch s390-tools-sles12-chzdev-optimize-css-search.patch s390-tools-sles12-chzdev-revoke-to-specify-no-category.patch s390-tools-sles12-chzdev-segfault-creating-netiucv-on-lpar.patch s390-tools-sles12-chzdev-set-online-state-correctly.patch s390-tools-sles12-chzdev-unable-to-enable-dasd-diag-access.patch s390-tools-sles12-lszdev-chzdev-corrected-man-page.patch s390-tools-sles12-lszdev-chzdev-misc-patches.patch s390-tools-sles12-lszdev-corrected-device-lookup-for-btrfs.patch s390-tools-sles12-lszdev-manual-page-update.patch s390-tools-sles12-install-manpages.patch - Added patch s390-tools-sles12-systemd-iucvterm-units.patch (bnc#877346) Removed iucvtty@.service file, since the above patch replaces it. - Added util-linux, gawk, and procps packages to the list of Requires just to be safe (bnc#86736). ------------------------------------------------------------------- Mon May 5 18:53:08 UTC 2014 - mpost@suse.com - Added the following patches (bnc#876334) - s390-tools-sles12-lsreipl-fix-fcp-reipl-type.patch lsreipl: Show "fcp" instead of "fcp_dump" for fcp re-IPL target - s390-tools-sles12-chzdev-Improved-error-handling.patch chzdev: Improved error handling - s390-tools-sles12-lszdev-corrected-device-lookup-for-btrfs.patch lszdev: corrected lookup for filesystem on btrfs - s390-tools-sles12-chzdev-lun-and-wwpn-now-must-be-16-hex-digits.patch chzdev: LUN and WWPN now must be 16 hex digits - s390-tools-sles12-chzdev-revoke-to-specify-no-category.patch chzdev: Revoke to specify no category if needed - s390-tools-sles12-lszdev-chzdev-corrected-man-page.patch lszdev/chzdev: Update man page description for FCP LUNs ------------------------------------------------------------------- Mon Apr 21 16:28:01 UTC 2014 - mpost@suse.com - Added the following patches (bnc#874143) - s390-tools-sles12-dbginfo-collect-journalctl.patch dbginfo.sh: Add collection of journalctl - s390-tools-sles12-chzdev-set-online-state-correctly.patch chzdev: Did not get the online state correctly - s390-tools-sles12-lszdev-chzdev-misc-patches.patch lszdev/chzdev: Miscellaneous patches ------------------------------------------------------------------- Mon Apr 14 06:18:41 UTC 2014 - mpost@suse.com - Added the following patches (bnc#873239) - s390-tools-sles12-chzdev-fix-output.patch chzdev: tools generates numerous error messages - s390-tools-sles12-lszdev-manual-page-update.patch lszdev: Update of the manpage - s390-tools-sles12-chzdev-optimize-css-search.patch chzdev: Performance optimization to get css information - s390-tools-sles12-chzdev-missing-online.patch chzdev: Add missing online attribute - Updated cputype to also display the IBM model number ------------------------------------------------------------------- Thu Apr 10 19:09:22 UTC 2014 - mpost@suse.com - Added cputype and cputype.8. Fate#317195. - Updated and reformatted README.SUSE. It is no longer obsolete. - Check to see if systemd is running before executing systemctl daemon-reload in %post and %postun. ------------------------------------------------------------------- Mon Apr 7 19:50:41 UTC 2014 - mpost@suse.com - Moved the "Requires: perl" back to osasnmpd. - Added "Requires: perl-base" to the main package. (bnc#871830). ------------------------------------------------------------------- Fri Apr 4 22:11:17 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-chzdev-segfault-creating-netiucv-on-lpar.patch chzdev: Segfault when creating netiucv device in lpar (bnc#872092) ------------------------------------------------------------------- Thu Apr 3 18:56:58 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-chzdev-creates-invalid-zFCP-udev-rules.patch chzdev: invalid udev rules for zFCP (bnc#871292) - Added s390-tools-sles12-chzdev-fails-to-group-layer-3-nics.patch chzdev: fails to create grouped Layer 3 NICs (bnc#871222) (bnc#871223) - Added s390-tools-sles12-chzdev-fails-to-configure-IUCV.patch chzdev: fails to configure/deconfigure IUCV interfaces (bnc#871230) - Added s390-tools-sles12-chzdev-unable-to-enable-dasd-diag-access.patch chzdev: fails to enable DIAG access mode for DASD (bnc#871226) - Added s390-tools-sles12-chzdev-lszdev-Compilation-warnings.patch chzdev/lszdev: warnings about unused functions and others (bnc#871220) ------------------------------------------------------------------- Mon Mar 31 15:49:52 UTC 2014 - mpost@suse.com - Modified the content of s390-tools-zdsfs.caution.txt slightly to convey just where the zdsfs feature originated. - Added "SUSE-NonFree" as the license for the zdsfs sub-package to get the caution displayed when the package is installed. ------------------------------------------------------------------- Sat Mar 29 15:51:02 UTC 2014 - mpost@suse.com - Moved the "Requires: perl" from osasnmpd to the main package - Added, coreutils, rsync, and tar to the list of "Requires." ------------------------------------------------------------------- Fri Mar 28 23:42:37 UTC 2014 - mpost@suse.com - Add s390-tools-sles12-qetharp-iface-arg-limit.patch (bnc#870948). qetharp: limit interface name argument to 15 characters - Added s390-tools-sles12-chzdev-lszdev-new-tools.7.patch (bnc849864). Reduced the number of supported devices and some options. The tools have a stripped down but better tested functionality. ------------------------------------------------------------------- Thu Mar 27 23:36:10 UTC 2014 - mpost@suse.com - Renamed the package containing zdsfs to s390-tools-zdsfs - Replaced the dummy LICENSE file with s390-tools-zdsfs.caution.txt - Modified the spec file to rename s390-tools-zdsfs.caution.txt to CAUTION so it will get installed in /usr/share/doc/packages/s390-tools-zdsfs - Fixed a bug with iucv_configure that caused any IUCV interfaces past iucv9 to be ignored. - Modified dasd_configure so that instead of simply exiting with a return code of 8 when an unformatted DASD volume was found, it would continue with writing the udev rules for it. (bnc#864719) ------------------------------------------------------------------- Wed Mar 26 00:19:08 UTC 2014 - mpost@suse.com - Modified zfcp_san_disc to work with the output from the latest lsscsi command. (bnc#864417) - Re-added DISTRELEASE=%{release} to the make and make install commands in the spec file so that the version number output meets IBM's expectations. (bnc#869982) ------------------------------------------------------------------- Fri Mar 7 06:57:12 UTC 2014 - mpost@suse.com - Modified zfcp_san_disc to add a timing loop to wait for the remote FCP port to appear in sysfs. (bnc#864119) - Moved the location of zipl.conf.sample from /etc/ to /usr/share/doc/packages/s390-tools/ now that grub2 is the official boot loader ------------------------------------------------------------------- Fri Feb 28 20:06:14 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-chzdev-lszdev-new-tools.6.patch from IBM. Many improvements on the formatting of the source files, new options and man pages. Renamed scsi.c to zfcp.c and scsi.h to zfcp.h. Cleaned up sources. ------------------------------------------------------------------- Thu Feb 27 13:14:47 UTC 2014 - thardeck@suse.com - Added a short explanation to the iucvtty template header ------------------------------------------------------------------- Sun Feb 23 21:30:34 UTC 2014 - thardeck@suse.com - Renamed iucvtty@hvc0.service to iucvtty@.service following the getty template naming scheme - Added installation section to iucvtty@.service so a iucvtty instance can be activated for example with `systemctl enable iucvtty@lxterm1.service` - Prevented automatic creation of one default iucvtty instance ------------------------------------------------------------------- Thu Feb 20 19:29:39 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-zipl-fix-kernel-parameter-line.patch (bnc#853930) zipl: Fix potentially invalid argument in kernel parameter line. ------------------------------------------------------------------- Tue Feb 18 18:21:38 UTC 2014 - mpost@suse.com - Updated zfcp_disk_configure and zfcp_san_disc to work with NPIV and auto LUN scanning in newer kernels. (bnc#864119) ------------------------------------------------------------------- Thu Feb 13 19:48:41 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-chzdev-lszdev-new-tools.5.patch from IBM. This patch fixes problems with module configuration, check & diff. ------------------------------------------------------------------- Tue Feb 11 19:10:15 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-chzdev-lszdev-temp-fix.patch to fix a segfault until IBM can get an update out. ------------------------------------------------------------------- Mon Feb 10 22:19:36 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-znetconf-r-format.patch (bnc#863076) qetharp: Allow for 16-char network interface names - Added s390-tools-sles12-znetconf-r-format.patch (bnc#863076) znetconf: Allow for 16-char network interface names ------------------------------------------------------------------- Fri Feb 7 18:42:08 UTC 2014 - mpost@suse.com - Updated to s390-tools-1.24.1. This includes (and obsoletes) the fixes included in s390-tools-sles12-fix-31bit-compile-warnings.patch as well as the following which were found during the Alpha phase: Changes of existing tools: - dbginfo.sh: Cleanup messages of the script - dbginfo.sh: Reduced log output for sysfs collection - dbginfo.sh: Adding data collection from journalctl Bug Fixes: - lsdasd: Fix device selection for a given busid - zipl dump tools: Fix dump device size detection - zipl dump tools: Ensure that last progress message is printed - zipl: Fix I/O error recovery - zipl: Fix FBA boot - znetconf, lsqeth: Allow for 16-char network interface names - Updated all patches to refer to 1.24.1 instead of 1.24.0 - Updated s390-tools-sles12-pardasdfmt.patch to fit the new source code. ------------------------------------------------------------------- Fri Feb 7 00:21:49 UTC 2014 - mpost@suse.com - Replaced s390-tools-sles12-chzdev-lszdev-new-tools.patch with the original set of patches from IBM, now that everything compiles: s390-tools-sles12-chzdev-lszdev-new-tools.1.patch s390-tools-sles12-chzdev-lszdev-new-tools.2.patch s390-tools-sles12-chzdev-lszdev-new-tools.3.patch - Added s390-tools-sles12-chzdev-lszdev-temporary-makefile-revert.patch and s390-tools-sles12-chzdev-lszdev-restore-makefile.patch since the patches as shipped from IBM are not being built against the current version of the s390-tools source. - Added s390-tools-sles12-chzdev-lszdev-new-tools.4.patch from IBM. - Updated s390-tools-sles12-install-lszdev-manpage.patch to also install chzdev.8 and renamed it to s390-tools-sles12-install-manpages.patch Also explicitly set the file permissions to 644. - Added %dir entries in the spec file for /var/adm/backup/chzdev and /var/adm/backup/chzdev/udev - Removed s390-tools-sles12-chzdev-iucv-typo-fix.patch since the lastest IBM update included the fix. ------------------------------------------------------------------- Wed Feb 5 00:29:24 UTC 2014 - mpost@suse.com - Updated and re-added s390-tools-sles12-pardasdfmt.patch. - Modified mkdump.pl to not use the experimental "switch" feature. (bnc#861954) - Modified s390-tools-sles12-zipl_boot_msg.patch to add an extra blank line before and after the "note" to VM users to have it look like it does today. - Added "ZFCPDUMP_DIR=/usr/lib/s390-tools/zfcpdump" to the make command so that zfcpdump would look in the right directory. - Removed an unnecessary "mkdir -p $RPM_BUILD_ROOT%{_datadir}/s390-tools/zfcpdump" from the spec file - Removed some of the new code from IBM for the Persistent Device Configuration tool so that it would compile. This means that the fixes for bnc#861579 and bnc#861581 can be deployed. - Added s390-tools-sles12-chzdev-iucv-typo-fix.patch to correct a typo in a sysfs path name. ------------------------------------------------------------------- Tue Jan 21 19:58:35 UTC 2014 - mpost@suse.com - Added dracut to the list of BuildRequires. - Commented out all references to mkinitrd, since we might not have to do anything in that area with the introduction of dracut. ------------------------------------------------------------------- Tue Jan 21 19:53:06 UTC 2014 - mpost@suse.com - Changed the licensing of mkdump.pl and mkdump.8 from "GPL2 or GPL3" to GPL2 or later as requested. ------------------------------------------------------------------- Wed Jan 15 17:51:43 UTC 2014 - mpost@suse.com - Added s390-tools-sles12-fix-31bit-compile-warnings.patch. (bnc#851123) ------------------------------------------------------------------- Wed Dec 18 16:52:10 UTC 2013 - mpost@suse.com - Added s390-tools-sles12-lszcrypt-ep11-support.patch lszcrypt: Support EP11 crypto adapters - Updated s390-tools-sles12-zipl_boot_msg.patch to fit new source. - Removed s390-tools-sles12-shorten-dump-msgs.patch. - Updated s390-tools-sles12-chzdev-lszdev-new-tools.patch to fit new source. ------------------------------------------------------------------- Thu Dec 12 17:00:54 UTC 2013 - mpost@suse.com - Added /usr/lib/systemd/system/iucvtty@.service for systemd support - Renamed sles12.chzdev.lszdev.addition.patch to s390-tools-sles12-chzdev-lszdev-new-tools.patch ------------------------------------------------------------------- Tue Nov 19 19:51:15 UTC 2013 - mpost@suse.com - First attempt at building s390-tools 1.24.0 - Removed the blktrace_api.h as it is no longer needed. - Removed vmlogrdr.hotplug since that was for Linux 2.4 kernels. ------------------------------------------------------------------- Fri Nov 8 21:45:33 UTC 2013 - mpost@suse.com - IBM s390-tools-1.15.0 Maintenance Patches (#2) - s390-tools-sles11sp3-zipl-zfcpdump-possible-cpus.patch zipl: Use "possible_cpus" kernel parameter - s390-tools-sles11sp3-dbginfo-missing_man_page.patch dbginfo.sh: Add missing man page - qeth_configure: Ensure any user-input hexidecimal numbers are in lower case. (bnc#829513) ------------------------------------------------------------------- Fri Sep 6 17:01:23 UTC 2013 - mpost@suse.com - [CIO] Add robustness against missing interrupts to non-path-grouped internal IO requests - s390-tools part (bnc#837742) - s390-tools-sles11sp3-lscss-add_vpm.patch ------------------------------------------------------------------- Mon Aug 19 19:45:40 UTC 2013 - mpost@suse.com - IBM s390-tools-1.15.0 Maintenance Patches (#1) (bnc#824766) - s390-tools-sles11sp3-zipl-mvdump-fix-force.patch zipl: Fix zipl "--force" option for DASD multi-volume dump - s390-tools-sles11sp3-zgetdump-elf-hdr-alloc-fix.patch zgetdump: Fix ELF header size calculation ------------------------------------------------------------------- Fri Aug 9 17:39:10 UTC 2013 - mpost@suse.com - IBM s390-tools-1.15.0 Maintenance Patches (#1) (bnc#824766) - s390-tools-sles11sp3-dbginfo-handle-pipes-in-sysfs.patch dbginfo.sh: Avoiding eclusion list for pipes in sysfs ------------------------------------------------------------------- Wed Jul 31 21:20:29 UTC 2013 - mpost@suse.com - Updated ctc_configure, dasd_configure, iucv_configure, qeth_configure, zfcp_disk_configure and zfcp_host_configure so that DEBUG is usable as an environment variable, and not hardcoded in the script. - Updated ctc_configure to correct some typos. - Updated iucv_configure - Changed all instances of ROUTER to PEER_USERID to better reflect what the value respresents. - Updated the _iucv_dev loops to point to $_iucv_dir/netiucv?* to avoid picking up entries for the new hvc_iucv* consoles. (bnc#749094) - Convert the user-entered PEER_USERID to all upper case so the user doesn't have to. (bnc#749094) - Updated qeth_configure - Changed all references of "control channel" to "data channel" to match what it's called in the driver code and documentation. - Fixed a few typos. - Updated zfcp_host_configure to add a missing udev rule. (bnc#830321) - Updated mkinitrd-setup-qeth.sh - It now handles both VLAN and bonded channel interfaces - Restructured the code to better handle the new functionality. - Updated zpxe.rexx to correct some whitespace inconsistencies and to uncomment a screen clearing that wasn't desired during testing, and left that way by mistake. - Modified %post script to wipe out any dangling symlinks before creating new ones. (bnc#830288) - Added the shadow package to the RPM PreReq list. (bnc#832428) - Added man pages for ctc_configure, dasd_configure, iucv_configure, qeth_configure, zfcp_disk_configure and zfcp_host_configure. ------------------------------------------------------------------- Tue Jul 30 14:49:01 UTC 2013 - mpost@suse.com - Added the shadow package to the list of PreReqs, per problem report from Duncan Mac-Vicar P. ------------------------------------------------------------------- Thu Jun 13 18:33:14 UTC 2013 - mpost@suse.com - IBM s390-tools-1.15.0 Maintenance Patches (#1) (bnc#824766) - dbginfo.sh: Improvements on logging, content and collecting sysfs. - dbginfo.sh: enhancement for cryptograhic adapters ------------------------------------------------------------------- Wed May 8 15:03:22 UTC 2013 - mpost@suse.com - Added udev rules (59-graf.rules) for 3270 devices. (bnc#792991) ------------------------------------------------------------------- Thu May 2 16:03:07 UTC 2013 - mpost@suse.com - Updated qeth_configure to not create a udev entry for the layer2 attribute on OSN devices. OSN devices don't support Layer 2. (bnc#788924) ------------------------------------------------------------------- Fri Apr 26 21:41:37 UTC 2013 - mpost@suse.com - Enabled kdump over the network (bnc#807794) - Updated mkinitrd-setup-qeth to look at $static_interfaces $dhcp_interfaces instead of $interfaces. - Changed installation location of mkinitrd-boot-qeth.sh and mkinitrd-setup-qeth.sh to /lib/mkinitrd/scripts instead of /usr/lib/s390-tools/mkinitrd/scripts. ------------------------------------------------------------------- Wed Apr 17 19:03:01 UTC 2013 - mpost@suse.com - Updated qeth_configure with the fix in bnc#794577, comment #9. ------------------------------------------------------------------- Wed Apr 17 18:31:25 UTC 2013 - mpost@suse.com - IBM s390-tools-1.15.0 Maintenance Patches (#13) (bnc#815053) - zfcpdbf: fix offset and length of fields in trace records with s390-tools-sles11sp3-zfcpdbf-offset-length-fields-trace-records.patch ------------------------------------------------------------------- Tue Apr 2 19:50:38 UTC 2013 - mpost@suse.com - Updated mkinitrd-setup-dasd.sh script to include udev rules for DASD in DIAG mode. (bnc#808256) ------------------------------------------------------------------- Tue Mar 26 16:59:03 UTC 2013 - mpost@suse.com - Updated zpxe.rexx file. - Lots more comments and error checking - Made it more in the style a z/VM systems programmer would expect. - Made it more generic than just for Cobbler ------------------------------------------------------------------- Fri Mar 22 20:36:13 UTC 2013 - mpost@suse.com - Updated License entries to GPL-2.0+ to conform with SPDX format (bnc#733581) ------------------------------------------------------------------- Mon Mar 18 21:30:34 UTC 2013 - mpost@suse.com - Changed all comments and message output in zfcp_host_configure and zfcp_disk_configure wit h ZFCP to zFCP (3/18/2013) - Updated ctc_configure, dasd_configure, iucv_configure, qeth_configure, zfcp_disk_configure , zfcp_host_configure to replace $SYSFS with /sysfs in the one instance where $SYSFS would b e null.- ------------------------------------------------------------------- Fri Mar 15 10:57:54 UTC 2013 - rmilasan@suse.com - Add/change links in /dev/disk/by-id on 'change' and 'add' udev trigger (bnc#808042). add: s390-tools-sles11sp2-update-by_id-links-on-change-and-add-action.patch ------------------------------------------------------------------- Mon Feb 18 18:22:34 UTC 2013 - mpost@suse.com - Added s390-tools-sles11sp3-add_lsscm.patch (bnc#792709) ------------------------------------------------------------------- Thu Feb 7 18:31:33 UTC 2013 - mpost@suse.com - Updated usage information on - ctc_configure - dasd_configure - iucv_configure - qeth_configure - zfcp_disk_configure - zfcp_host_configure (bnc#769561) - Fixed ctc_configure to not try to bind a CTC or LCS interface to the right driver module if it already is bound to the right one. -------------------------------------------------------------------- Wed Feb 6 23:55:53 UTC 2013 - mpost@suse.com - s390-tools SP2/SP3 patchset #12 (bnc#795513): - ziomon: follow symlinks to find multipath devices - dbginfo.sh: Improvements on data collection and speed - zfcpdump: Release HSA early if Linux kernel supports it - ziomon: cope with scsi disks not part of multipath device - zfcpdbf: fix decoding of deferred errors ------------------------------------------------------------------- Wed Jan 16 21:10:00 UTC 2013 - mpost@suse.com - lszcrypt: Add support for CEX4 crypto cards (bnc#794511, fate#314245) ------------------------------------------------------------------- Mon Dec 10 14:46:11 UTC 2012 - uli@suse.com - Fuzzy live dump for System z (bnc#789801, fate#314099) - Add new zconf tool dasdstat (bnc#789803, fate#314076) - Allow SCM access via EADM subchannels (bnc#792709, fate#314244) - dasd: add safe offline interface (bnc#792967, fate#312679) ------------------------------------------------------------------- Thu Dec 6 13:09:51 UTC 2012 - uli@suse.com - kdump: Add s390-tools kdump support (bnc#786472, fate#314079) ------------------------------------------------------------------- Wed Nov 28 14:41:59 UTC 2012 - uli@suse.com - zfcp_san_disc: added fix for listing of LUNs on SVC/V7000 by hare (bnc#742352) ------------------------------------------------------------------- Thu Nov 22 14:13:20 UTC 2012 - uli@suse.com - qeth_configure: add option to udev rule if setting it succeeds, not if it fails (bnc#744317) ------------------------------------------------------------------- Fri Nov 16 14:24:02 UTC 2012 - uli@suse.com - zfcp_host_configure: handle non-numeric "online" argument properly (bnc#769290) ------------------------------------------------------------------- Thu Nov 15 14:00:00 UTC 2012 - uli@suse.com - *_configure: print meaningful error messages on failure (bnc#746660) ------------------------------------------------------------------- Thu Nov 15 13:50:06 UTC 2012 - uli@suse.com - s390-tools-1.15.0 Maintenance Patches #11 (bnc#780272) - zipl: Flush disk buffers before installing IPL record ------------------------------------------------------------------- Fri Jul 20 13:40:01 UTC 2012 - uli@suse.com - s390-tools-1.15.0 Maintenance Patches #10 (bnc#760339) - ziomon: Fix handling of multiple multipath devices - lsluns: Fix checks for scsi generic (sg) functionality. - lsluns: Check SCSI registration in loop, after LUN0&WLUN unit_add ------------------------------------------------------------------- Thu Apr 12 11:44:15 UTC 2012 - uli@suse.com - s390-tools-1.15.0 Maintenance Patches #9 (bnc#751477) - cmsfs-fuse: Use pread/pwrite if mmap'ing the whole disk fails - znetconf: layer autodetection not working for IP VSWITCH - mon_statd: fix error "udevsettle: command not found" - mon_statd: fix stopping of unused records ------------------------------------------------------------------- Tue Mar 27 16:05:33 UTC 2012 - jjolly@suse.com - Added /sbin/udevadm settle to zfcp_disk_configure (bnc#593773) ------------------------------------------------------------------- Mon Feb 6 10:35:41 CET 2012 - ihno@suse.de - Fix CTC device setup (reassigning channels from lcs to ctcm) (bnc#745034) ------------------------------------------------------------------- Thu Feb 2 15:55:00 UTC 2012 - uli@suse.com - fix LCS device setup in ctc_configure (bnc#741071) - from SP1: - updated qeth_configure and dasd_configure to support SUSE Studio Onsite (bnc#699047) - qeth_configure: Proper IP takeover during layer 3 operation (bnc#694124) ------------------------------------------------------------------- Wed Feb 1 12:02:54 UTC 2012 - uli@suse.com - more fixes: (bnc#743407) - qethconf: fix/improve IPv6 address handling - znetconf: layer autodetection not working under z/VM 6.x ------------------------------------------------------------------- Fri Jan 13 12:19:12 UTC 2012 - stefan.fent@suse.com - s390-tools-1.15.0 Maintenace Patches #7 (bnc #740749) - ttyrun: Introduce verbose option for syslog messages - HiperSockets Network Concentrator: correct warning - HiperSockets Network Concentrator: adapt to kernel level ------------------------------------------------------------------- Thu Jan 12 21:59:49 UTC 2012 - jjolly@suse.com - qeth_configure: Added udevadm trigger to help rewrite necessary network scripts (bnc#728059) ------------------------------------------------------------------- Fri Dec 16 16:49:56 UTC 2011 - uli@suse.com - dasdfmt: use proper way to detect DASD cylinder count (bnc#733787) - build system fix (bnc#737189) ------------------------------------------------------------------- Mon Dec 5 12:16:03 UTC 2011 - uli@suse.com - dasdfmt: fix cylinder count for large disks in YaST mode (bnc#733787) ------------------------------------------------------------------- Mon Dec 5 10:51:13 UTC 2011 - uli@suse.com - qetharp: Man page improvements (bnc#732669) ------------------------------------------------------------------- Tue Nov 29 13:05:01 UTC 2011 - uli@suse.com - fix dasdfmt usage text (bnc#732503) ------------------------------------------------------------------- Tue Nov 8 22:12:41 UTC 2011 - jjolly@suse.com - rules.xpram: Added rule to create xpram nodes for each slram node (bnc#723521,LTC#75884) - rules.hw_random: Added rule to create hw_random node when hwrng is created (bnc#724083,LTC#75951) ------------------------------------------------------------------- Fri Nov 4 16:10:34 UTC 2011 - uli@suse.com - lsdasd: Improve performance when used with many DASDs (bnc#728041) ------------------------------------------------------------------- Fri Nov 4 13:02:25 UTC 2011 - uli@suse.com - qeth_configure: recognize 1731/02 as qeth device (bnc#720082) ------------------------------------------------------------------- Mon Oct 24 10:58:51 UTC 2011 - uli@suse.com - more fixes: (bnc#725132) - zfcpdbf: Include and exclude messages display problem - zfcpdbf: help option does not list version '-v' option - cmsfs-fuse: Fix file size calculation for files larger than 2 GB - cmsfs-fuse: Fix big write requests - cmsfs-fuse: Multiple write requests for fixed record format files - cmsfs-fuse: Fix EOF detection for fixed record format files - zipl: fix scsi dump - cmsfs-fuse: Fix block allocation on large disks - cmsfs-fuse: Update the number of records on disk full condition - cmsfs-fuse: Add support for FBA-512 disks - dumpconf: Add full path of executable for killproc invocation - zfcpdbf: Messages with round-trip processing timediff problem - lsmem/chmem: Fix memory device size calculation ------------------------------------------------------------------- Thu Oct 13 12:36:16 UTC 2011 - thardeck@suse.com - moved iucvconn_on_login from doc to /usr/bin - added rcdumpconf link ------------------------------------------------------------------- Fri Oct 7 14:08:38 UTC 2011 - uli@suse.com - more fixes: (bnc#722508) - lsmem/chmem: Fix handling of memory holes - dasdview: fix printing of random characters after busid ------------------------------------------------------------------- Fri Sep 16 10:02:32 UTC 2011 - uli@suse.com - more fixes: (bnc#718024) - qetharp: fix buffer overflow - lsqeth: add hsuid attribute - af_iucv manpage: add HiperSockets transport - dbginfo.sh: does not run under kernel 3.x - lsdasd,lscss: suppress error messages when working on unsettled sysfs tree. - lsluns: check for required SCSI generic (sg) functionality. - zipl: Prevent unsupported parmfile address. ------------------------------------------------------------------- Tue Sep 6 17:10:17 CEST 2011 - uli@suse.de - update dumpconf patches (bnc#716118) ------------------------------------------------------------------- Mon Sep 5 16:23:53 CEST 2011 - uli@suse.de - update -> 1.15.0 (obsoletes most patches, bnc#unknown) ------------------------------------------------------------------- Mon Aug 29 08:21:38 UTC 2011 - thardeck@suse.de - updated mkdump script - fixed DASD dump device recognition (bnc#713801) - fixed allow creating dump devices on unformatted DASDs (bnc#713677) - dumpconf restart doesn't trigger delay minutes - s390-tools-sles11sp2-01-dumpconf-restart.patch - dumpconf support for eight vmcmd commands - s390-tools-sles11sp2-02-dumpconf-8cmds.patch - updated dumpconf sysconfig accordingly - s390-tools-sles11sp2-sysconfig-compatible-dumpconf.patch ------------------------------------------------------------------- Tue Aug 12 09:44:54 UTC 2011 - thardeck@novell.com - added new mkdump script (fate#304024) - mkdump.pl: new version - backward compatible with mkdump.sh - s390-tools-sles11sp2-mkdump-manpage.patch: man page for mkdump - add sysconfig meta data to /etc/sysconfig/dumpconf - s390-tools-sles11sp2-sysconfig-compatible-dumpconf.patch: add sysconfig metadata to dumpconf ------------------------------------------------------------------- Fri Aug 12 08:38:04 UTC 2011 - uli@suse.de - fdasd: fix generation of disk label for option 'auto' and 'config' (bnc#708534) - restored corrupted patch s390-tools-sle11sp1-04-lscss-fix-tr-quoting.patch ------------------------------------------------------------------- Wed Aug 3 11:37:22 CEST 2011 - hare@suse.de - qeth_configure: Properly deregister with collect during chpid vary off (bnc#474627) ------------------------------------------------------------------- Thu Jul 28 12:16:01 UTC 2011 - uli@suse.de - dasd_configure: deactivate DIAG mode properly when told to do so (bnc#591037) ------------------------------------------------------------------- Thu Jul 28 11:47:02 UTC 2011 - uli@suse.de - bug fixes (bnc#708534): - cpuplugd: Fix check for existing variable names - cpuplugd: Fix typos and wording in man page ------------------------------------------------------------------- Fri Jul 22 11:28:55 UTC 2011 - uli@suse.de - hyptop didn't build because ncurses-devel was missing from BuildRequires (bnc#698740) ------------------------------------------------------------------- Thu Jul 14 13:56:45 CEST 2011 - uli@suse.de - build hyptop and cmsfs-fuse (bnc#698740) - maintenance patches (bnc#698755): - dasdinfo: return error code in case of failure. - lsluns: Fix showing all active LUNs not just well known LUNs. - lsreipl: Prevent error messages for empty sysfs files - cpuplugd: add cpu/cmm_min/max sanity checks - cpuplugd: fix daemon startup race ------------------------------------------------------------------- Tue Jun 20 15:39:12 CEST 2011 - thardeck@suse.de - added zpxe.rexx script (fate#312134) ------------------------------------------------------------------- Tue Jun 14 15:32:29 CEST 2011 - uli@suse.de - s390-tools patchset #12 for SP2 (bnc#698740) - s390-tools-12-sles11sp2-infrastructure.patch: Add infrastructure code for new features - s390-tools-12-sles11sp2-ttyrun.patch: ttyrun: run a program if a terminal device is available (fate#312296) - s390-tools-12-sles11sp2-hyptop.patch: hyptop: Show hypervisor performance data on System z (fate#311766) - s390-tools-12-sles11sp2-chreipl-enhancements.patch: chreipl: Re-IPL tool "chreipl" enhancements (fate#311861) - s390-tools-12-sles11sp2-tunedasd-query-reservation-status.patch: tunedasd: add new option -Q / --query_reserve (fate#311910) - s390-tools-12-sles11sp2-znetconf-osxosm.patch: znetconf: support for OSA CHPID types OSX and OSM (fate#311898) - s390-tools-12-sles11sp2-use-cio_settle.patch: chccwdev,chchp: Use /proc/cio_settle (fate#311763) - s390-tools-12-sles11sp2-cio_ignore.patch: cio_ignore: manage the I/O exclusion list (fate#311763) - s390-tools-12-sles11sp2-qethconf-msgexpl.patch: qethconf: Indicate command failure and show message list. (fate#312067) - s390-tools-12-sles11sp2-zipl-calculate_ramdisk_address.patch: zipl: Remove DEFAULT_RAMDISK_ADDRESS (fate#311877) - s390-tools-12-sles11sp2-zipl-automenu.patch: zipl: Add support for automatic menus (fate#311908) - s390-tools-12-sles11sp2-fdasd-partition_types.patch: fdasd: Implement new partition types (fate#311921) - s390-tools-12-sles11sp2-qetharp-ipv6-support.patch: qetharp: support ipv6 for query arp cache for HiperSockets (fate#311912) - s390-tools-12-sles11sp2-zgetdump-zipl-mkdump.patch: zgetdump/zipl: Add ELF dump support (needed for makedumpfile) (fate#311893, fate#311895) - s390-tools-12-sles11sp2-dumpconf-prevent-loop.patch: dumpconf: Prevent re-IPL loop for dump on panic. (fate#311757) - s390-tools-12-sles11sp2-cmsfs-fuse.patch: cmsfs-fuse: support for CMS EDF filesystems via fuse. (fate#311847, fate#311858) - s390-tools-12-sles11sp2-cpuplugd-cmm-improvements.patch: cpuplugd: Improve memory ballooning with cpuplugd (fate#312069) ------------------------------------------------------------------- Tue May 10 15:32:37 UTC 2011 - jjolly@novell.com - s390-tools patchset #11 (bnc#689579) - s390-tools-11-01-fdasd-buffer-overflow-in-error-message.patch: fdasd: buffer overflow when writing to read-only device (LTC#70680) - s390-tools-11-02-cpuplugd-multiplication.patch: cpuplugd: Fix incorrect multiplication in rules evaluation (LTC#71166) - s390-tools-11-03-ziomon-outfile-invalid-option.patch: ziomon: Option '--output' should be '--outfile' as documented (LTC#71566) - s390-tools-11-04-ziomon-debugfs-mount-path-checking.patch: ziomon: Debugfs mount path check at /sys/kernel/debug (LTC#71749) ------------------------------------------------------------------- Tue Apr 26 22:46:39 UTC 2011 - jjolly@novell.com - fdasd: added -f options to force execution on non-dasd devices (bnc#689018) ------------------------------------------------------------------- Tue Feb 22 23:37:52 UTC 2011 - jjolly@novell.com - s390-tools patchset #10 (bnc#652287) - s390-tools-10-01-ziomon-returncodes.patch: ziomon: ziomon tools return 1 when using option -h, --help and -v (LTC#66507) - s390-tools-10-02-qethconf-subchset.patch: qethconf: process devices with subchannel set != 0 (LTC#66662) - s390-tools-10-03-iucvtty-login-h.patch: iucvtty: do not specify z/VM user ID as argument to login -h (LTC#66393) - s390-tools-10-04-fdasd-format7-label.patch: fdasd/dasdfmt: fix format 7 label (LTC#68122) - s390-tools-10-05-cpuplugd-cmm_pages.patch: cpuplugd: cmm_pages not set and restored correctly (LTC#68341) - s390-tools-10-06-lsluns-svc.patch: lsluns: Fix LUN reporting for SAN volume controller (SVC) (LTC#68559) - s390-tools-10-07-lsluns-uppercase.patch: lsluns: Accept uppercase and lowercase hex digits (LTC#68562) ------------------------------------------------------------------- Tue Aug 10 15:18:56 CEST 2010 - jjolly@suse.de - s390-tools patchset #9 (bnc#621182) - s390-tools-09-01-ts-shell-group-names.patch: ts-shell: do not restrict group names to be alphanumeric (LTC#61504) - s390-tools-09-02-znetconf-driveroption.patch: znetconf: --drive|-d option returning "unknown driver" for qeth (LTC#64732) - s390-tools-09-03-cpuplugd-stack-smash.patch: cpuplugd: fix stack overwrite (LTC#64733) - s390-tools-09-04-zfcpdbf-dates.patch: zfcpdbf: Fix --dates option (LTC#65405) - s390-tools-09-05-cpuplugd-cmm-limits.patch: cpuplugd: fix cmm_min/max limit checks (LTC#65220) - s390-tools-09-06-cpuplugd-cpu_min.patch: cpuplugd: set cpu_min to 1 by default (LTC#65224) - s390-tools-09-07-lsluns-adapter-offline.patch: lsluns: uninitialized value on adapter offline (LTC#65768) - s390-tools-09-08-zfcpdbf-uninitialized.diff: zfcpdbf: Fix "Use of uninitialized value" and output issues (LTC#65904) - s390-tools-09-09-xcec-mc.patch: xcec-bridge: Fix multicast forwarding (LTC#66141) ------------------------------------------------------------------- Wed Jun 2 11:23:55 CEST 2010 - sf@suse.de - dasd_reload: iterate over all dasd udev-rules (bnc #606394) ------------------------------------------------------------------- Fri May 7 07:26:41 CEST 2010 - jjolly@suse.de - s390-tools-08-01-lsqeth-clear-print-array.patch: lsqeth: add clearing of print array for every qeth device (bnc#602015,LTC#63091) - dasd_configure: Properly handling exit when dasd status is unformatted (bnc#601918) - dasdfmt.8: removed extra -P reference from man page (bnc#602003) ------------------------------------------------------------------- Thu Apr 22 17:11:53 CEST 2010 - jjolly@suse.de - s390-tools-07-01-lsdasd-document-option-b.patch: lsdasd: add missing description of option -b to man page (bnc#597838,LTC#62575) - s390-tools-07-02-lsqeth-sysfs.patch: lsqeth: sysfs mount point not determined (bnc#597838) ------------------------------------------------------------------- Mon Apr 19 22:18:40 CEST 2010 - jjolly@suse.de - s390-tools-sles11sp1-lsmem-chmem-v2.patch: lsmem/chmem: Tools to manage memory hotplug. ------------------------------------------------------------------- Tue Apr 13 12:48:59 CEST 2010 - ihno@suse.de - disabled s390-tools-0001-Zipl-VirtIO-bootloader-code.patch ------------------------------------------------------------------- Tue Apr 13 12:30:05 CEST 2010 - agraf@suse.de - s390-tools-0001-Zipl-VirtIO-bootloader-code.patch: disable stack protector (bnc#594445) ------------------------------------------------------------------- Fri Apr 9 07:44:50 CEST 2010 - jjolly@suse.de - s390-tools-0001-Zipl-VirtIO-bootloader-code.patch: enable virtio bootloading (bnc#594445) ------------------------------------------------------------------- Mon Mar 29 20:33:48 CEST 2010 - jjolly@suse.de - IBM 390-tools patchset #6 (bnc#591089) - s390-tools-sles11sp1-06-01-ziomon_fix_df_output.patch: ziomon: Fix 'df' command usage (LTC#61794) - s390-tools-sles11sp1-06-02-ziomon_fix_wrong_install_path.patch: ziomon: Remove check for ziorep_config availability (LTC#61801) - s390-tools-sles11sp1-06-03-zipl-force-help.patch: zipl: Option "--force" is not included in text for "--help" (LTC#61973) - s390-tools-sles11sp1-06-04-ziomon-fix_multipathing.patch: ziomon: Fix problem with multipath command output (LTC#61977) ------------------------------------------------------------------- Fri Mar 12 04:48:06 CET 2010 - jjolly@suse.de - IBM s390-tools patchset #5 (bnc#587152) - s390-tools-sles11sp1-05-01-zfcpdump-directio.patch: zfcpdump: Use direct IO in order to increase dump speed - s390-tools-sles11sp1-05-02-zipl_zfcp_partition.patch: zipl: zfcp dump partition error ------------------------------------------------------------------- Fri Mar 12 04:39:05 CET 2010 - jjolly@suse.de - zipl/zfcpdump: Use "cgroup_disable=memory" kernel parameter (bnc#572716) ------------------------------------------------------------------- Fri Mar 12 04:27:08 CET 2010 - jjolly@suse.de - mkswap.sh: Using udevadm instead of udevinfo (bnc#585130) ------------------------------------------------------------------- Mon Feb 22 07:59:02 CET 2010 - jjolly@suse.de - vmconvert: Fix progress bar shows garbage (bnc#580976,LTC#60883) ------------------------------------------------------------------- Fri Feb 19 22:05:22 CET 2010 - jjolly@suse.de - dasd_configure: do not set unformatted dasd offline (bnc#579584) ------------------------------------------------------------------- Mon Feb 8 14:03:39 CET 2010 - uli@suse.de - dasd_configure: avoid unnecessary delays (bnc#561876) ------------------------------------------------------------------- Tue Feb 2 11:55:58 CET 2010 - jjolly@suse.de - Patchset #3 (bnc#575676) including: - s390-tools-sles11sp1-03-01-zipl-handle-ssch-status.patch: zipl: handle status during IPL SSCH (LTC#59816) - s390-tools-sles11sp1-03-02-chshut-disable-panic.patch: chshut: Mismatch between man and -h (LTC#59864) - s390-tools-sles11sp1-03-03-znetconf-chpidtypes-hex.patch: znetconf: index into chpidtype lookup table must be hex. ------------------------------------------------------------------- Mon Jan 25 17:16:44 CET 2010 - uli@suse.de - add error codes 7 (failed to activate) and 8 (not formatted) to dasd_configure (bnc#561876) ------------------------------------------------------------------- Mon Jan 25 16:59:12 CET 2010 - jjolly@suse.de - Add missing check and print NSS name in case an NSS has been IPLed. (bnc#559509) - Add missing NULL string termination when reading sysfs attributes - Fix possible SIGSEGV for "chreipl node /dev/dasdxy" ------------------------------------------------------------------- Mon Jan 25 10:54:05 CET 2010 - jjolly@suse.de - Patchset #2 (bnc#566684,LTC#59000) including: - s390-tools-sle11sp1-01-znetconf-returncodes.patch - s390-tools-sle11sp1-02-ziorep-returncodes.patch (LTC#59379) - s390-tools-sle11sp1-03-lstape_returncodes.patch (LTC#59386) - s390-tools-sle11sp1-04-lscss-fix-tr-quoting.patch - s390-tools-sle11sp1-05-lsqeth-new-attributes.patch - Init info->yastmode in dasdfmt.c (bnc#571653,LTC#59524) - zfcpdump: removed static linking (bnc#572716) ------------------------------------------------------------------- Tue Jan 12 12:58:03 CET 2010 - uli@suse.de - dasd_configure: give DASD some time to warm up (untested, bnc#561876) ------------------------------------------------------------------- Mon Dec 7 12:52:51 CET 2009 - hare@suse.de - zipl: Handle device-mapper devices (bnc#556208) ------------------------------------------------------------------- Thu Dec 3 16:16:40 CET 2009 - jjolly@suse.de - s390-tools, 59-dasd.rules: fix path to vol_id (bnc#554038) - dasdview, fdasd: fix floating point error for unformatted devices (bnc#554038) - ziomon: Fix multipath device detection (bnc#554038) - zipl: handle status during ipl (bnc#554038) ------------------------------------------------------------------- Sat Nov 21 00:26:45 CET 2009 - jjolly@suse.de - Reverted last change in order to add s390-tools 1.8.2 features: - tty terminal server over IUCV (bnc#546431,FATE#307002) - Large Volume support (bnc#546431,FATE#307003) - DS8000 Disk Encryption (bnc#546431,FATE#307004) - show disk encryption status - FICON - Format Record 0 on ECKD devices (bnc#546431,FATE#307012) - FCP - Performance data reports (bnc#546431,FATE#307000) - Automatic IPL after dump (bnc#546431,FATE#307009) - Add vmconvert option to vmur tool (bnc#546431,FATE#307010) - Automatic scan of network devices (bnc#546431,FATE#307016) - Bugfixes: - general: Fix compile warnings & do minor bugfixes - general: Adjust code to s390-tools upstream as far as possible - lsreipl: Show defined vmcmd correctly - fdasd: Fix auto mode behavior - general: Corrections to comply with SUSE rpmlint - Performance enhancements: - dasd,zfcp: Add udev rule to set increased "default max readahead" ------------------------------------------------------------------- Wed Nov 18 17:42:21 CET 2009 - uli@suse.de - update -> 1.8.1: - IUCV terminal server (fate#307002) - DASD large volume support (fate#307003) - obsoletes a ton of patches ------------------------------------------------------------------- Fri Nov 6 13:24:29 CET 2009 - hare@suse.de - Include mkinitrd scripts to setup qeth networking (bnc#541405) - Fixup vol_id pathname in mkdump.sh (bnc#505553) ------------------------------------------------------------------- Sat Oct 17 06:06:07 CEST 2009 - jjolly@suse.de - Added s390-tools-sles11sp1-dasdfmt-norecord_r0.patch (bnc#477816) ------------------------------------------------------------------- Mon Oct 12 18:20:03 CEST 2009 - jjolly@suse.de - s390-tools-02-cpuplugd-cmminit.patch: cpuplugd: fix cmm configuration file value initialization parser (bnc#519430,LTC#54629) - s390-tools-02-cpuplugd-limit.patch: cpuplugd: fix cmm_pages allocation outside min and max range (bnc#519430,LTC#55472) - s390-tools-02-cpuplugd-parser.patch: cpuplugd: Daemon does not work in a memplug only environment (bnc#519430,LTC#54285) - s390-tools-02-dasdinfo-fix-volume-serial.patch: dasdinfo: spaces in volume serial break udev device links (bnc#519430,LTC#52881) - s390-tools-02-dbginfo-remove-cpint.patch: dbginfo.sh: remove occurences of "cpint" (bnc#519430,LTC#54777) - s390-tools-02-zipl-fix-unsupported-device-driver.patch: zipl: zipl does not exit for an unsupported device driver. (bnc#519430,LTC#53660) ------------------------------------------------------------------- Thu Apr 23 21:27:09 CEST 2009 - jjolly@suse.de - dasdro: Updated hcp to vmcp (bnc#492504) ------------------------------------------------------------------- Tue Mar 31 23:16:37 CEST 2009 - jjolly@suse.de - s390-tools-01-dasdfmt-retry-reread-partition-table.patch: dasdfmt: retry when BLKRRPART fails (bnc#486043,LTC#52233) - s390-tools-01-dasdinfo_sysfs.patch: dasdinfo: error with new sysfs layout (bnc#486043,LTC#52309) - s390-tools-01-dasdview-fix-busid-lookup.patch: dasdview: fix busid look-up (bnc#486043,LTC#52122) - s390-tools-01-fdasd-buffer-overflow.patch: fdasd: fix buffer overflow for long device names (bnc#486043,LTC#51817) - s390-tools-01-ipl-panic.patch: lsshut: lsshut prints out an unnecessary error message (bnc#486043) - s390-tools-01-ziomon-scsi-tapes.patch: ziomon: SCSI tapes do not work (bnc#486043,LTC#51282) - s390-tools-01-zipl-fbadump-4gb.patch: zipl: FBA dump tool can only dump up to 4GB. (bnc#486043,LTC#52257) ------------------------------------------------------------------- Tue Feb 24 22:47:45 CET 2009 - ihno@suse.de - Add a check in dasd_configure to check environment (LPAR or z/VM) (bnc#477705) - Add a general README.SUSE about commands provided by SUSE (bnc#478009) - Fix online help of zfcp_san_disc and added online for some other commands (bnc#471830) ------------------------------------------------------------------- Thu Feb 19 14:36:07 CET 2009 - uli@suse.de - hsnc: pass OSA IF name to ip_watcher.pl (bnc#472366) ------------------------------------------------------------------- Wed Feb 18 11:43:49 CET 2009 - hare@suse.de - Fix remaining reference to hard-coded ECKD in dasd_configure (bnc#470408) ------------------------------------------------------------------- Mon Feb 9 16:16:17 CET 2009 - uli@suse.de - dasdfmt: propagate child exit codes (bnc#459677) ------------------------------------------------------------------- Fri Feb 6 15:44:35 CET 2009 - hare@suse.de - Return error code if sg_luns failed in zfcp_san_disc (bnc#472352) - Correctly configure FBA disks (bnc#470408) ------------------------------------------------------------------- Thu Feb 5 13:53:28 CET 2009 - uli@suse.de - use sysfs instead of /proc/qeth (bnc#472366) ------------------------------------------------------------------- Mon Jan 26 16:11:29 CET 2009 - hare@suse.de - Add %triggerin section to create zfcpdump correctly (bnc#446367) ------------------------------------------------------------------- Fri Jan 23 14:33:19 CET 2009 - uli@suse.de - fix boot.cpi behavior (bnc#457208) - change CPI_SET default to yes (bnc#455978) ------------------------------------------------------------------- Thu Jan 22 15:12:04 CET 2009 - jjolly@suse.de - Initialize error value to 0 (bnc#467275) ------------------------------------------------------------------- Mon Jan 19 15:29:11 CET 2009 - uli@suse.de - run insserv on boot.cpi, write to set attribute to pass CPI data (bnc#455978) ------------------------------------------------------------------- Mon Jan 12 16:26:03 CET 2009 - jjolly@suse.de - Added /usr/sbin/osasnmpd link to /usr/sbin/osasnmpd-2.6 (bnc#458547) ------------------------------------------------------------------- Fri Jan 9 17:51:07 CET 2009 - jjolly@suse.de - s390-tools-sles11-ziomon-fix-qdio-statistics.patch: Fix qdio statistics (bnc#417514) ------------------------------------------------------------------- Thu Dec 11 17:06:44 CET 2008 - hare@suse.de - Create /boot/zipl directory (bnc#457942) ------------------------------------------------------------------- Thu Dec 11 12:30:02 CET 2008 - hare@suse.de - Update mkinitrd scripts for zfcpdump (bnc#446367) - Include patches from IBM (bnc#417514): * Fix lszfcp -P after removal of a port * Allow zfcpdump to work in more initrds * tape390_display: Fix stack overwrite ------------------------------------------------------------------- Wed Dec 10 20:15:11 CET 2008 - jjolly@suse.de - Remove -s option from install sections in Makefiles. (bnc#417514) ------------------------------------------------------------------- Wed Dec 10 12:37:25 CET 2008 - hare@suse.de - Add mkinitrd requirement [bnc#457945] ------------------------------------------------------------------- Mon Dec 8 17:42:51 CET 2008 - kukuk@suse.de - Re-enable ExclusiveArchs ------------------------------------------------------------------- Fri Dec 5 16:07:01 CET 2008 - hare@suse.de - Generate zfcpdump image correctly ------------------------------------------------------------------- Fri Dec 5 12:30:04 CET 2008 - hare@suse.de - Updated to official 1.8.0 tarball from IBM (bnc#417514) * lsluns: Do not print full path of tool for error messages - only basename * ipl_tools: Add some new error messages * dumpconf: Adjust dumpconf init script to new lsdasd * ziomon: File header comments cleanup * dbginfo.sh: Collect more debug info * lsdasd: Remove CVS $Revision entries * lszfcp: Throw error message if no devices are configured * Prevent daemons from starting in single user mode - Remove rpmlint patch - Generate correct udev rule for boot from zfcp (bnc#434648) ------------------------------------------------------------------- Tue Dec 2 15:14:39 CET 2008 - uli@suse.de - fixed broken post/preun scripts (bnc#446367) ------------------------------------------------------------------- Fri Nov 21 08:34:29 CET 2008 - hare@suse.de - Fixed typo in dasd_configure (bnc#446998) ------------------------------------------------------------------- Thu Nov 20 08:32:38 CET 2008 - jjolly@suse.de - Moved creation/deletion of zfcpdump.{image,rd} into specfile %post and %preun sections. (bnc#446367) ------------------------------------------------------------------- Thu Nov 20 08:19:33 CET 2008 - jjolly@suse.de - Added script to mkdump.sh that creates zfcpdump.{image,rd} (bnc#446427) ------------------------------------------------------------------- Wed Nov 19 14:53:44 CET 2008 - jjolly@suse.de - Updated to 1.8.0 v8 tarball from IBM (bnc#417514) - lstape: Fix problems with new sysfs layout. - lszfcp: Update search for sysfs mount-point. - zipl: Fix zipl build process: Copy only text section with objcopy. - vmconvert: Remove leading newline for error messages. - ipl_tools: Fix various parser problems. - cpuplugd: Prevent compile warning. - Removed link error patch ------------------------------------------------------------------- Fri Nov 14 16:18:51 CET 2008 - hare@suse.de - Install updated dasd udev rules (bnc#444688) - Update dasd_configure to call udevadm settle (bnc#444672) - Install zfcpdump mkinitrd scripts (FATE#304069) ------------------------------------------------------------------- Tue Nov 11 16:14:47 CET 2008 - hare@suse.de - Updated to 1.8.0 v7 tarball from IBM (bnc#417514) - Removed obsolete patches - rpmlint fixes ------------------------------------------------------------------- Tue Nov 11 13:40:14 CET 2008 - hare@suse.de - Update zfcp_{disk,host}_configure to work with port auto discovery (bnc#435640) - Fix zfcp_san_disc to remove the correct sg device ------------------------------------------------------------------- Mon Nov 10 11:46:47 CET 2008 - hare@suse.de - Update zfcp_san_disc to check for WLUNs first (bnc#437633) ------------------------------------------------------------------- Thu Nov 6 15:37:07 CET 2008 - uli@suse.de - with all the udev red tape, we forgot to actually set the port number... (fate #304080) ------------------------------------------------------------------- Tue Nov 4 10:35:34 CET 2008 - hare@suse.de - Wait for DASD to become online (bnc#436980) ------------------------------------------------------------------- Mon Oct 27 14:04:32 CET 2008 - hare@suse.de - Update 59-dasd.rules (bnc#436980) - Use udevadm instead of udevsettle (bnc#437349) ------------------------------------------------------------------- Mon Oct 27 13:34:40 CET 2008 - jjolly@suse.de - Updated to 1.8.0 v6 tarball from IBM (bnc#417514) ------------------------------------------------------------------- Wed Oct 22 10:28:13 CEST 2008 - hare@suse.de - Update zfcp_san_disc to work with automatic port discovery (bnc#433863) ------------------------------------------------------------------- Mon Oct 20 15:49:33 CEST 2008 - uli@suse.de - restored change in qeth_configure from Sep 11 2008 that was overwritten by checkin on Sep 23 2008 (bnc #436824) ------------------------------------------------------------------- Tue Oct 14 13:15:14 CEST 2008 - uli@suse.de - restored change in dasdfmt from May 19 that was overwritten by subsequent checkins (bnc #368595, #434223) ------------------------------------------------------------------- Mon Oct 13 17:42:57 CEST 2008 - jjolly@suse.de - Updated to 1.8.0 v5 tarball from IBM (bnc#417514) ------------------------------------------------------------------- Thu Oct 9 16:25:50 CEST 2008 - uli@suse.de - added init script setting CPI data (fate #304052) ------------------------------------------------------------------- Fri Sep 26 15:07:01 CEST 2008 - jjolly@suse.de - Patched zipl/boot link to set build-id to none ------------------------------------------------------------------- Wed Sep 24 17:48:19 CEST 2008 - jjolly@suse.de - Updated to 1.8.0 v4 of the tarball - Added the blktrace_api.h as it doesn't exist in linux-kernel-headers at this time. ------------------------------------------------------------------- Tue Sep 23 09:52:20 CEST 2008 - hare@suse.de - Fix qeth_configure to always set the 'layer2' attribute (bnc#428352) - Update ctc_configure to set the protocol number correctly. ------------------------------------------------------------------- Fri Sep 19 13:20:28 CEST 2008 - hare@suse.de - Update dasd_reload script to work with udev rules (bnc#427458) ------------------------------------------------------------------- Thu Sep 18 17:39:46 CEST 2008 - jjolly@suse.de - Updated to 1.8.0 v3 of the tarball - Patched make to remove .note.gnu.build-id header during objcopy ------------------------------------------------------------------- Thu Sep 11 15:45:57 CEST 2008 - uli@suse.de - qeth_configure: added -n option for specifying the port number (fate #304080) ------------------------------------------------------------------- Wed Sep 3 11:09:34 CEST 2008 - hare@suse.de - Call mkinitrd_setup during %post and %postun (bnc#413709) - Fix qeth_configure script - Fix iucv_configure script ------------------------------------------------------------------- Tue Sep 2 18:08:41 CEST 2008 - jjolly@suse.de - Removed lib-zfcp-hbaapi to it's own package. - Update to 1.8.0 ------------------------------------------------------------------- Thu Aug 7 15:26:37 CEST 2008 - hare@suse.de - Update ctc_configure to use ctcm module instead of ctc ------------------------------------------------------------------- Fri Jul 25 10:42:36 CEST 2008 - hare@suse.de - Add network configuration scripts (iucv|ctc|qeth)_configure - Include mkinitrd scriptlets. - Fix RPMLint warnings. ------------------------------------------------------------------- Tue Jul 22 08:19:02 CEST 2008 - hare@suse.de - Compress s390-tools-1.7.0 with bzip2 ------------------------------------------------------------------- Mon Jul 21 16:15:57 CEST 2008 - hare@suse.de - Update to 1.7.0 - Build fixes for autobuild - Build zfcpdump_v2 only ------------------------------------------------------------------- Fri Jul 18 16:23:44 CEST 2008 - hare@suse.de - Backport from SLES10 SP2 - Update dasd_configure and zfcp_disk_configure script ------------------------------------------------------------------- Mon May 19 13:57:50 CEST 2008 - uli@suse.de - make old dasdfmt syntax work again (bnc#368595) ------------------------------------------------------------------- Fri Apr 18 10:50:56 CEST 2008 - hare@suse.de - Update to 1.6.3-v10 (bnc#380728) * cpuplugd: cpuplugd could not be stopped ------------------------------------------------------------------- Fri Apr 4 09:57:25 CEST 2008 - hare@suse.de - Update to 1.6.3-v9 (bnc#376700) * extend dasdinfo with a new compat-uid option * cpuplugd: cpuplugd may loop on systems with only 1 cpu * vmur: Fix man page ------------------------------------------------------------------- Mon Mar 17 14:42:33 CET 2008 - hare@suse.de - Update to 1.6.3-v8 (bnc#354137) ------------------------------------------------------------------- Mon Mar 3 15:02:07 CET 2008 - hare@suse.de - Fix build ------------------------------------------------------------------- Thu Feb 28 16:34:49 CET 2008 - hare@suse.de - Update to 1.6.3-v7 (bnc#365614) - Update to libzfcp-hbaapi-1.4.2 (bnc#365612) ------------------------------------------------------------------- Mon Feb 18 15:44:13 CET 2008 - hare@suse.de - update to 1.6.3-v6 tarball - Install cpuhotplugd (#341388, FATE#302806) - Add zfcp_san_disc script (#361848) ------------------------------------------------------------------- Tue Jan 22 18:15:30 CET 2008 - jjolly@suse.de - update to 1.6.3-v3 tarbar (#355355) - added cpuplugd config file to package (#355355) ------------------------------------------------------------------- Tue Nov 20 23:15:40 CET 2007 - jjolly@suse.de - update -> 1.6.3 (#341393) ------------------------------------------------------------------- Thu Oct 11 19:01:42 CEST 2007 - jjolly@suse.de - Modified script to wait for hbaapi module to complete loading (#332251) ------------------------------------------------------------------- Wed Oct 10 14:51:22 CEST 2007 - jjolly@suse.de - Added zfcp_san_disc utility (#332458) ------------------------------------------------------------------- Thu Sep 13 18:36:46 CEST 2007 - jjolly@suse.de - Added priority value for SWAPON within /etc/init.d/xpram (#308074) ------------------------------------------------------------------- Sat Jul 14 00:48:14 CEST 2007 - jjolly@suse.de - Correctly return error codes in mkdump.sh (#276429) ------------------------------------------------------------------- Thu Mar 8 14:55:03 CET 2007 - hare@suse.de - Install mon_fsstatd correctly (#252115) ------------------------------------------------------------------- Mon Mar 5 16:24:27 CET 2007 - hare@suse.de - update -> 1.6.0 * Implement dasdinfo and supply own udev rules (#222326) - Fix major/minor number problem (#245342) - install mon_fsstatd sysconfig and init scripts ------------------------------------------------------------------- Mon Feb 19 14:15:04 CET 2007 - uli@suse.de - update -> 1.6.0-v7 (documentation touchups, prevent fs corruption when running zipl on linear dm targets) ------------------------------------------------------------------- Fri Feb 2 14:07:46 CET 2007 - hare@suse.de - update -> 1.6.0-v5 * Expand S390_TOOLS_RELEASE macro correctly (#240667) * Install the dumpconf utility - Fix compilation issues. ------------------------------------------------------------------- Wed Jan 31 10:29:03 CET 2007 - hare@suse.de - update -> 1.6.0-v4: * tape390_crpyt: Enhanced error handling * New man page for /dev/prandom ------------------------------------------------------------------- Fri Jan 19 15:59:50 CET 2007 - hare@suse.de - update -> 1.6.0-v3; Fixup 3590 crypt support. ------------------------------------------------------------------- Tue Jan 16 13:08:28 CET 2007 - hare@suse.de - zfcp_host_configure: modify the dev_loss_tmp setting to 30 (bug #220556) ------------------------------------------------------------------- Thu Jan 11 13:18:49 CET 2007 - uli@suse.de - update -> 1.6.0-v2 - fixed regexes in zfcp_disk_configure (bug #185798) ------------------------------------------------------------------- Fri Nov 3 15:01:14 CET 2006 - hare@suse.de - Fix build against new libsysfs. ------------------------------------------------------------------- Mon Jun 19 17:01:59 CEST 2006 - hare@suse.de - zfcp_disk_configure: translate the entire WWPN string (#185798 - LTC24706) ------------------------------------------------------------------- Fri Jun 2 13:16:15 CEST 2006 - hare@suse.de - mkdump.sh: wait for udev to finish before continuing (#163258 - LTC22904) ------------------------------------------------------------------- Fri May 19 15:26:16 CEST 2006 - hare@suse.de - Fix build of zgetdump (#176334 - LTC23955) - Fix Makefile options - Fix error messages for zfcp_(disk|host)_configure (#159552 - LTC22536) ------------------------------------------------------------------- Thu May 18 11:44:12 CEST 2006 - hare@suse.de - mkdump.sh: fix check_devsize (#165818) ------------------------------------------------------------------- Tue May 9 22:31:50 CEST 2006 - ihno@suse.de - fixed activation of XPRAM devices. (#161352) ------------------------------------------------------------------- Fri Apr 28 13:51:23 CEST 2006 - hare@suse.de - mkdump.sh: use sfdisk instead of parted; Fixup error messages (#165818) ------------------------------------------------------------------- Fri Apr 21 15:38:31 CEST 2006 - hare@suse.de - dasd_configure: Remove hwcfg file on deconfiguring device even if no ccw device exists. ------------------------------------------------------------------- Wed Apr 19 22:14:54 CEST 2006 - ihno@suse.de - create mountpoint, if it does not exist (#157108) - force the creation of swap/filesystem (#161363) ------------------------------------------------------------------- Thu Apr 13 16:06:31 CEST 2006 - uli@suse.de - dasdfmt: fixed man page, can now specify >1 device with -n, support x.x.xxxx notation (bug #160058) ------------------------------------------------------------------- Fri Apr 7 11:20:09 CEST 2006 - hare@suse.de - Fix zfcp_disk_configure again (#160161 - LTC22622) - mkdump.sh should wait for udev (#163258 - LTC22904) - Install all scripts with the rpm (#162939 - LTC22876) ------------------------------------------------------------------- Fri Mar 24 16:28:30 CET 2006 - hare@suse.de - Update to s390-tools-1.5.3 - Fix zipl boot message (#145612) - Fix zfcp_disk_configure to correctly deactivate disks (#160161 - LTC22622) ------------------------------------------------------------------- Thu Mar 23 16:39:39 CET 2006 - uli@suse.de - osasnmpd was inadvertently built for ucd-snmp; fixed (bug #159501) ------------------------------------------------------------------- Wed Feb 22 09:58:53 CET 2006 - hare@suse.de - Update to s390-tools-1.5.2 - Update to lib-zfcp-hbaapi-1.4 - dasd_configure should wait for udev before calling vmcp (#149490 - LTC21537) - Fix mkdump to not use blkid - Minor fixes to mkdump ------------------------------------------------------------------- Wed Feb 8 12:40:32 CET 2006 - ihno@suse.de - fixed xpram to handle swap and to keep the existing filesystem (#148662) ------------------------------------------------------------------- Wed Jan 25 21:45:00 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Tue Jan 24 17:02:32 CET 2006 - hare@suse.de - Unset DEBUG variable in dasd_configure - Use 'vmcp' command instead of deprecated 'hcp' ------------------------------------------------------------------- Wed Jan 18 14:14:54 CET 2006 - hare@suse.de - Adding 'devs' to neededforbuild. ------------------------------------------------------------------- Thu Dec 15 16:35:12 CET 2005 - uli@suse.de - actually apply e2fsprogs patches - replace get_user macro in kernel with version from 2.6.15 - fix C++ errors in vmconvert - create /boot/zipl directory ------------------------------------------------------------------- Tue Dec 6 10:32:00 CET 2005 - hare@suse.de - Update package to SLES9 SP3 version. ------------------------------------------------------------------- Fri Nov 11 11:41:01 CET 2005 - hare@suse.de - Write default values from zfcp_disk_configure (#120657 - LTC18813) - Update to lib-zfcp-hbaapi-1.3 ------------------------------------------------------------------- Tue Nov 8 23:19:37 CET 2005 - ihno@suse.de - Update to Developer Codedrop 1.5.1 ------------------------------------------------------------------- Tue Oct 25 08:52:23 CEST 2005 - hare@suse.de - Fixed inconsistencies with lsdasd man page and online help. - Check command line parameters of zfcpdbf for validity. ------------------------------------------------------------------- Fri Oct 21 13:53:42 CEST 2005 - hare@suse.de - Fix dasd_configure to handle DIAG mode correctly (bugs #120166, #129704). ------------------------------------------------------------------- Tue Oct 18 17:25:47 CEST 2005 - uli@suse.de - start/killproc can't handle wrapper scripts; worked around (bugs #127534, #127535) ------------------------------------------------------------------- Thu Sep 29 14:30:18 CEST 2005 - hare@suse.de - Fix vmlogrdr init script (#118581). ------------------------------------------------------------------- Fri Sep 23 15:45:36 CEST 2005 - hare@suse.de - Fix build of dasdfmt (#118027). - Use RPM_OPT_FLAGS for build ------------------------------------------------------------------- Tue Sep 20 14:58:36 CEST 2005 - hare@suse.de - Update to s390-tools-1.5.0 (#117968). ------------------------------------------------------------------- Thu Jun 30 18:32:45 CEST 2005 - uli@suse.de - fixed neededforbuild ------------------------------------------------------------------- Mon Jun 20 11:48:21 CEST 2005 - hare@suse.de - Update to s390-tools-1.4.1 (#88526). ------------------------------------------------------------------- Wed Jun 15 16:59:48 CEST 2005 - uli@suse.de - add sysconfig file for osasnmpd parameters (bug #86631) - fixed assembler syntax in zipl (stricter checking in new gas) ------------------------------------------------------------------- Wed Jun 15 16:17:25 CEST 2005 - yxu@suse.de - fix build with GCC4 - add prebuild images and ramdisk for zfcp ------------------------------------------------------------------- Wed Jun 15 10:56:43 CEST 2005 - hare@suse.de - Fix start_hsnc.sh (#88526). ------------------------------------------------------------------- Tue Apr 19 16:47:18 CEST 2005 - hare@suse.de - Update to s390-tools-1.4.0 - Include lib-zfcp-hbaapi-1.2 ------------------------------------------------------------------- Fri Nov 26 16:51:34 CET 2004 - hare@suse.de - Added new CU types 2107 and 1750 to dasd_configure (#48587). ------------------------------------------------------------------- Thu Nov 18 12:12:27 CET 2004 - hare@suse.de - Added /sbin/mkdump script for creating dump devices (#22182). ------------------------------------------------------------------- Wed Nov 10 01:14:35 CET 2004 - ro@suse.de - fix typo in specfile ------------------------------------------------------------------- Fri Nov 5 11:48:09 CET 2004 - hare@suse.de - Update to s390-tools-1.3.2 - Fix output at formatting of >26 disks (#47699). ------------------------------------------------------------------- Wed Jul 14 08:39:45 CEST 2004 - hare@suse.de - Fixed default polling interval for appldata (#42694). ------------------------------------------------------------------- Mon Jul 5 15:21:46 CEST 2004 - uli@suse.de - rename osasnmpd-2.6 -> osasnmpd (bug #42588) ------------------------------------------------------------------- Mon Jul 5 15:03:45 CEST 2004 - hare@suse.de - Fixed init-scripts for appldata (#42694). - Updated sysconfig files to correctly display variables. ------------------------------------------------------------------- Tue Jun 15 15:46:57 CEST 2004 - hare@suse.de - Fix cpint usage in initrd (no hcp available). ------------------------------------------------------------------- Mon Jun 14 19:57:10 CEST 2004 - ihno@suse.de - enabled and fixed osasnmpd generation (#41893) - removed unused patch (fix is part of update 9 june) ------------------------------------------------------------------- Wed Jun 9 16:46:32 CEST 2004 - hare@suse.de - Update to s390-tools 1.3.1 (#41736). ------------------------------------------------------------------- Mon Jun 7 16:25:56 CEST 2004 - uli@suse.de - added missing %fillup_prereq (bug #41732) ------------------------------------------------------------------- Fri Jun 4 11:29:16 CEST 2004 - hare@suse.de - Check read-only status from dasd_configure (#38817) ------------------------------------------------------------------- Tue Jun 1 18:27:15 CEST 2004 - bk@suse.de - xpram script updated regarding checking of config settings(#40733) ------------------------------------------------------------------- Tue Jun 1 16:05:11 CEST 2004 - uli@suse.de - dasdro: do not rely on automatic loading of cpint module (bug #38817) ------------------------------------------------------------------- Thu May 27 21:16:37 CEST 2004 - ihno@suse.de - fixed uninitialized variable in fdasd (#40032) ------------------------------------------------------------------- Wed May 26 17:28:57 CEST 2004 - hare@suse.de - Fixed dasd_reload script to correctly reload any configured DASD devices. - Fixed zfcp_disk_configure to handle uppercase WWPNs - Fixed dasd_configure to correctly handle DIAG devices - Fixed dasd_configure to generate hwcfg files with correct SCRIPTDOWN values. ------------------------------------------------------------------- Tue May 25 16:39:35 CEST 2004 - hare@suse.de - Added dasd_reload script for YaST2. ------------------------------------------------------------------- Tue May 18 17:16:14 CEST 2004 - uli@suse.de - fixed incorrect use of fillup_and_insserv (bug #40733) ------------------------------------------------------------------- Mon Apr 26 13:37:03 CEST 2004 - uli@suse.de - added dasdro script - fixed warning in e2fsprogs code ------------------------------------------------------------------- Mon Apr 26 09:37:35 CEST 2004 - hare@suse.de - Fixed dasd_configure to not write hwcfg file if the directory does not exist (#39387) ------------------------------------------------------------------- Fri Apr 23 16:38:17 CEST 2004 - hare@suse.de - Update to final version s390-tools-1.3.0 - Fixed zfcp_host_configure to use sh instead of bash - Fixed zfcp_disk_configure to not try to delete hwcfg-file if the directory does not exist. ------------------------------------------------------------------- Tue Apr 6 14:24:56 CEST 2004 - hare@suse.de - Update *_configure scripts to only write hwcfg files if directory exists - Fix dasd_configure to load modules. ------------------------------------------------------------------- Fri Apr 2 16:47:53 CEST 2004 - hare@suse.de - Fixed xpram startup script. ------------------------------------------------------------------- Fri Mar 12 15:17:22 CET 2004 - uli@suse.de - made YaST mode easier to parse as reqd. by jsrain ------------------------------------------------------------------- Fri Mar 5 15:58:20 CET 2004 - hare@suse.de - Update to pre-Lobster codedrop. - Added dasd/zfcp configuration scripts. - Update to allow for preconfigured builds. ------------------------------------------------------------------- Fri Dec 19 16:16:50 CET 2003 - uli@suse.de - merged bk's changes from SLES8: change hsnc to use sysconfig configuration style ------------------------------------------------------------------- Wed Dec 17 16:37:05 CET 2003 - uli@suse.de - dasdfmt: added parallel formatting - dasdfmt: added easily parseable output mode ("YaST mode") ------------------------------------------------------------------- Tue Dec 16 16:39:45 CET 2003 - bk@suse.de - fix path of snmp agent directory in the ucd-snmp case ------------------------------------------------------------------- Fri Dec 12 16:58:23 CET 2003 - bk@suse.de - Version 1.2.3 with hsnc for SLES8(post-SP3-maint) and SLES9! - add rc script for the HiperSockets Network Concentrator(hsnc) - add spec support for using ucdsnmp on SLES8 and net-snmp on SLES9 - add support to build the zfcpdump kernel in parallel using #jobs ------------------------------------------------------------------- Fri Nov 28 16:19:49 CET 2003 - bk@suse.de - Update to version 1.2.3 ------------------------------------------------------------------- Fri Nov 21 17:07:14 CET 2003 - hare@suse.de - Added missing '-lwrap' to osasnmpd. ------------------------------------------------------------------- Thu Nov 13 08:45:54 CET 2003 - hare@suse.de - Update to version 1.2.2 - Checked in for STABLE / pre-SLES9. - Update to use net-snmp instead of ucdsnmp. ------------------------------------------------------------------- Fri Oct 31 11:15:08 CET 2003 - ihno@suse.de - Update to zfcpdump to the one of version 1.2.2 ------------------------------------------------------------------- Tue Sep 2 18:27:41 CEST 2003 - hare@suse.de - Fixed changelog entry. ------------------------------------------------------------------- Wed Aug 27 18:34:23 CEST 2003 - hare@suse.de - Fixed zipl to use the correct path for zfcpdump.[image|rd] (Bugzilla #29147). ------------------------------------------------------------------- Mon Jul 28 15:44:25 CEST 2003 - hare@suse.de - update from version 1.2.0 to 1.2.1 - Fixed zfcpdump with ext2 ramdisk ------------------------------------------------------------------- Thu Jul 24 15:25:16 CEST 2003 - hare@suse.de - update from version 1.1.5 to 1.2.0 - new zfcpdump for dumping on FC devices - zipl now handles config files internally - removed parsecfg - included linux-2.4.19, busybox and e2fsprogs for zfcpdump building ------------------------------------------------------------------- Wed Feb 5 15:52:31 CET 2003 - ihno@suse.de - update from version 1.1.3 to 1.1.5 - remote gcc3.3 warnings (tape390_display) - fixed dasdfmt.8 manpage - fixed "free track" handling of fdasd ------------------------------------------------------------------- Wed Oct 23 15:24:03 CEST 2002 - bk@suse.de - add s390-tools-1.1.3-dasdviewfix.diff and manpage for /proc/chandev ------------------------------------------------------------------- Fri Sep 27 10:53:02 CEST 2002 - bk@suse.de - fix error message which will confuse some clients for sure(IBM) ------------------------------------------------------------------- Wed Aug 21 16:39:26 CEST 2002 - froh@suse.de - fix rcchandev to no longer source rc.config - update to s390-tools-1.1.3-may2002.tar.gz from 2002-08-08 drop: * osasnmpd: added new parameter '-x SOCKADDR' ------------------------------------------------------------------- Thu Aug 1 16:58:28 CEST 2002 - bk@suse.de - update to s390-tools-1.1.2-may2002.tar.gz from 2002-07-31 drop - new subpackage osasmpd, only new files, so no split is possible. ------------------------------------------------------------------- Mon Jul 15 18:45:56 CEST 2002 - bk@suse.de - back to static zipl directory and fix uninstall message for updates ------------------------------------------------------------------- Fri Jul 12 00:45:24 CEST 2002 - bk@suse.de - loader uses versioned directory to avoid boot problems after update - fix lib64 build problem ------------------------------------------------------------------- Tue Jun 11 18:42:55 CEST 2002 - bk@suse.de - update for ucdsnmp-4.2.5: add tcpd to neededforbuild and add -lwarp to cflags of osasnmpd define allow_severity and deny_severity for tcpd's libwrap ------------------------------------------------------------------- Fri Jun 7 23:40:55 CEST 2002 - bk@suse.de - update to may2002 stream, version 1.1.1 ------------------------------------------------------------------- Thu Feb 28 11:48:40 CET 2002 - froh@suse.de - added silo.sh script for YaST1 from the old package s390utils to drop that package. ------------------------------------------------------------------- Mon Feb 11 18:56:25 CET 2002 - bk@suse.de - add s390-tools-5.diff to support newer kernels as well(2.4.17) ------------------------------------------------------------------- Mon Jan 28 19:00:09 CET 2002 - bk@suse.de - install: add _lib support for lib64 ------------------------------------------------------------------- Fri Dec 14 18:57:31 CET 2001 - bk@suse.de - Update to the Dec12 2001 drop s390-tools (-2, -3 and -4) patches - zipl.conf: fix target setting of dumptape, add missing dumpdasd ------------------------------------------------------------------- Mon Nov 12 14:09:02 CET 2001 - bk@suse.de - add IBM diffs s390-tools-2.tar.gz and s390-tools-3.tar.gz ------------------------------------------------------------------- Fri Oct 19 00:52:11 CEST 2001 - bk@suse.de - fix error with killing tail in rcchandev verbose-reload /sbin/rcchandev: line 219: 15941 Terminated tail -0f /var/log/warn 1>&2 (shown in yast) ------------------------------------------------------------------- Fri Oct 12 17:09:51 CEST 2001 - bk@suse.de - zipl.conf: change obsolete /boot/zilo-kernel to /boot/kernel ------------------------------------------------------------------- Mon Sep 17 14:37:17 CEST 2001 - froh@suse.de - added the 2001-09-14 codedrop patches, which include these fixes: - fdasd: - added VTOC format 5 & 7 DSCB support - added command line batch options for one partition, for a config file and to suppress messages - fixed OS/390 data set name munging (no more blanks, no more changes after deleting and re-creating a partition) - read-only disk access now fails - fixed free space detection while adding partitions - added command 'r' to re-create the whole VTOC - dasdfmt: - added VTOC format 7 DSCB support - added blksize >4096 or <512 check (complain & fail) - added marking of dasds as non-bootable during dasdfmt - added Hashmarks (for 3270 terminals) and Progress bar - misc: - added multi volume support for system dump (tape 3480/90) - added Tape device display support to system dump - added 64 bit support for dasd and tape dump. ------------------------------------------------------------------- Wed Sep 12 18:54:42 CEST 2001 - bk@suse.de - Use the source of the 2001-08-20 codedrop for this version and update the context of the zipl-reiserfs.diff acordingly. - Also use the original source, let the spec do the unpacking. This is less error-prone than doing it by hand and is quicker to check. ------------------------------------------------------------------- Wed Aug 29 10:54:08 CEST 2001 - froh@suse.de - integrated 2.4.7-based codedrop, which adds a config file to fdisk ------------------------------------------------------------------- Mon Aug 13 21:34:43 CEST 2001 - bk@suse.de - better mark /etc/chandev.conf not only %config but also noreplace. - patch zipl to work with reiserfs too. ------------------------------------------------------------------- Fri Aug 10 20:13:29 CEST 2001 - bk@suse.de - fix no newline at end of /etc/chandev.conf bug and polish text - fix insserv recursion due to bogus syslog in Required-Start ------------------------------------------------------------------- Tue Aug 7 16:06:50 CEST 2001 - froh@suse.de - cleaned up docu in /etc/chandev.conf ------------------------------------------------------------------- Mon Aug 6 14:22:40 CEST 2001 - froh@suse.de - added support for /proc/chandev ------------------------------------------------------------------- Thu Jul 19 20:50:28 CEST 2001 - bk@suse.de - added Provides: s390utils:/sbin/dasdfmt (split from s390utils) ------------------------------------------------------------------- Fri Jul 13 18:31:30 CEST 2001 - mls@suse.de - fixed install section ------------------------------------------------------------------- Fri Jul 13 16:15:33 CEST 2001 - bk@suse.de - new package based on s390utils
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
