Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP4:Update
hplip
change-udev-rules.diff
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File change-udev-rules.diff of Package hplip
Index: b/data/rules/56-hpmud.rules =================================================================== --- a/data/rules/56-hpmud.rules +++ b/data/rules/56-hpmud.rules @@ -1,8 +1,33 @@ # HPLIP udev rules file. Notify console user if plugin support is required for this device. +# +# SUSE changed: +# +# Exchanged the rule to GOTO hpmud_usb_rules if SUBSYSTEM is "usb" +# with the rule if SUBSYSTEM is "ppdev" to avoid that the "ppdev" rule +# is needlessly processed when SUBSYSTEM is "usb". +# +# Added GOTO hpmud_rules_end rule to skip the hpmud_usb_rules +# if SUBSYSTEM is not "usb" or if ENV{DEVTYPE} is not "usb_device" or if SUBSYSTEM is not "ppdev" +# to avoid that the hpmud_usb_rules are needlessly processed. +# +# The rule to automatically "check ... plugin status" is disabled +# because automated installation of non-free proprietary third-party software +# (here the plugin from HP) should not happen and it can cause whatever kind +# of strange behaviour see for example https://bugs.launchpad.net/bugs/1197416 +# and https://bugs.launchpad.net/bugs/1221348 +# while in contrast manual printer setup via hp-setup usually "just works" +# and it is clear for the user what goes on and in case of failure what went wrong. +# +# Because the rule to automatically "check ... plugin status" +# is also used to upload firmware into printers that need it +# see https://bugs.launchpad.net/bugs/1220628 +# a rule that only uploads firmware into printers that need it is added. +# +# If possible activate hpaio backend support in /etc/sane.d/dll.conf. ACTION!="add", GOTO="hpmud_rules_end" -SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="hpmud_usb_rules" +SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664" GOTO="hpmud_rules_end" LABEL="hpmud_usb_rules" @@ -13,6 +38,12 @@ ENV{ID_USB_INTERFACES}=="", IMPORT{built ATTR{idVendor}=="03f0", ENV{ID_USB_INTERFACES}=="*:0701??:*|*:ffcc00:", OWNER="root", GROUP="lp", MODE="0664", ENV{libsane_matched}="yes", ENV{hp_test}="yes", ENV{ID_HPLIP}="1" # This rule will check the smart install feature, plugin status and firmware download for the required printers. -ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/nohup /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM}'" +#ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c '/usr/bin/nohup /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM}'" +# This rule uploads firmware to HP USB printer devices if needed: +ENV{hp_test}=="yes", PROGRAM="/bin/logger -p user.info udev hpmud.rules runs hp-firmware to test if HP device with USB vendor ID $attr{idVendor} and USB product ID $attr{idProduct} at USB bus ID $env{BUSNUM} and USB device ID $env{DEVNUM} needs firmware and if yes to upload it", RUN+="/usr/bin/hp-firmware -s $env{BUSNUM}:$env{DEVNUM}" + +# If possible activate hpaio backend support in /etc/sane.d/dll.conf: +ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'if test -w /etc/sane.d/dll.conf ; then sed -i -e /hpaio/d /etc/sane.d/dll.conf ; echo hpaio >>/etc/sane.d/dll.conf ; fi'" LABEL="hpmud_rules_end" +
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor