File wicked.changes of Package wicked.35460

-------------------------------------------------------------------
Mon Sep  2 10:19:13 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- compat-suse: fix dummy interfaces configuration with 
  INTERFACETYPE=dummy (boo#1229555, gh#openSUSE/wicked#1031)
  [+ 0001-compat-suse-repair-dummy-interfaces-boo-1229555.patch] 

-------------------------------------------------------------------
Thu Jul 18 14:32:55 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- Update to version 0.6.76
  - compat-suse: warn user and create missing parent config of
    infiniband children (gh#openSUSE/wicked#1027)
  - client: fix origin in loaded xml-config with obsolete port
    references but missing port interface config, causing a
    no-carrier of master (bsc#1226125)
  - ipv6: fix setup on ipv6.disable=1 kernel cmdline (bsc#1225976)
  - wireless: add frequency-list in station mode (jsc#PED-8715)
  - client: fix crash while hierarchy traversing due to loop in
    e.g. systemd-nspawn containers (bsc#1226664)
  - man: add supported bonding options to ifcfg-bonding(5) man page
    (gh#openSUSE/wicked#1021)
  - arputil: Document minimal interval for getopts (gh#openSUSE/wicked#1019)
  - man: (re)generate man pages from md sources (gh#openSUSE/wicked#1018)
  - client: warn on interface wait time reached (gh#openSUSE/wicked#1017)
  - compat-suse: fix dummy type detection from ifname to not cause
    conflicts with e.g. correct vlan config on dummy0.42 interfaces
    (gh#openSUSE/wicked#1016)
  - compat-suse: fix infiniband and infiniband child type detection 
    from ifname (gh#openSUSE/wicked#1015)
- Removed patches included in the source archive:
  [- 0001-ifreload-pull-UP-again-on-master-lower-changes-bsc1224100.patch]
  [- 0002-increase-arp-retry-attempts-on-sending-bsc1218668.patch]

-------------------------------------------------------------------
Tue Jun 11 11:22:19 UTC 2024 - Marius Tomaschewski <mt@suse.com>

- arp: increase arp-send retry value to avoid address configuration
  failure due to ENOBUF reported by kernel while duplicate address
  detection with underlying bonding in 802.3ad mode reporting link
  "up & running" too early (bsc#1218668, gh#openSUSE/wicked#1020,
  gh#openSUSE/wicked#1022).
  [+ 0002-increase-arp-retry-attempts-on-sending-bsc1218668.patch]

-------------------------------------------------------------------
Wed May 15 15:00:02 UTC 2024 - Marius Tomaschewski <mt@suse.com>

- client: fix ifreload to pull UP ports/links again when the config
  of their master/lower changed (bsc#1224100,gh#openSUSE/wicked#1014).
  [+ 0001-ifreload-pull-UP-again-on-master-lower-changes-bsc1224100.patch]

-------------------------------------------------------------------
Wed May  8 10:16:30 UTC 2024 - Marius Tomaschewski <mt@suse.com>

- Update to version 0.6.75:
  - cleanup: fix ni_fsm_state_t enum-int-mismatch warnings
  - cleanup: fix overflow warnings in a socket testcase on i586
  - ifcheck: report new and deleted configs as changed (bsc#1218926)
  - man: improve ARP configuration options in the wicked-config.5
  - bond: add ports when master is UP to avoid port MTU revert (bsc#1219108)
  - cleanup: fix interface dependencies and shutdown order (bsc#1205604)
    - Remove port arrays from bond,team,bridge,ovs-bridge (redundant)
      and consistently use config and state info attached to the port
      interface as in rtnetlink(7).
    - Cleanup ifcfg parsing, schema configuration and service properties
    - Migrate ports in xml config and policies already applied in nanny
    - Remove "missed config" generation from finite state machine, which
      is completed while parsing the config or while xml config migration.
    - Issue a warning when "lower" interface (e.g. eth0) config is missed
      while parsing config depending on it (e.g. eth0.42 vlan).
    - Resolve ovs master to the effective bridge in config and wickedd
    - Implement netif-check-state require checks using system relations
      from wickedd/kernel instead of config relations for ifdown and add
      linkDown and deleteDevice checks to all master and lower references.
    - Add a `wicked <ifup|ifdown|ifreload> --dry-run …` option to show the
      system/config interface hierarchies as notice with +/- marked
      interfaces to setup and/or shutdown.
- Removed patches included in the source archive:
  [- 0001-addrconf-fix-fallback-lease-drop-bsc-1220996.patch]
  [- 0002-extensions-nbft-replace-nvme-show-nbft-with-nvme-nbf.patch]
  [- 0003-move-all-attribute-definitions-to-compiler-h.patch]
  [- 0004-hide-secrets-in-debug-log-bsc-1221194.patch]
  [- 0005-client-do-to-not-convert-sec-to-msec-twice-bsc-1222105.patch]

-------------------------------------------------------------------
Tue Apr  9 15:40:01 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- client: do not convert sec to msec twice (bsc#1222105)
  [+ 0005-client-do-to-not-convert-sec-to-msec-twice-bsc-1222105.patch] 

-------------------------------------------------------------------
Thu Mar 19 17:00:01 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- addrconf: fix fallback-lease drop (bsc#1220996)
  [+ 0001-addrconf-fix-fallback-lease-drop-bsc-1220996.patch]
- extensions/nbft: use upstream `nvme nbft show` (bsc#1221358)
  [+ 0002-extensions-nbft-replace-nvme-show-nbft-with-nvme-nbf.patch]
- hide secrets in debug log (bsc#1221194)
  [+ 0003-move-all-attribute-definitions-to-compiler-h.patch]
  [+ 0004-hide-secrets-in-debug-log-bsc-1221194.patch]

-------------------------------------------------------------------
Fri Feb 23 16:06:09 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- update to version 0.6.74 
  + team: add new options like link_watch_policy (jsc#PED-7183)
  + Fix memory leaks in dbus variant destroy and fsm free (gh#openSUSE/wicked#1001)
  + xpath: allow underscore in node identifier (gh#openSUSE/wicked#999)
  + vxlan: don't format unknown rtnl attrs (bsc#1219751)
- removed patches included in the source archive:
  [- 0009-ifreload-VLAN-changes-require-device-deletion-bsc-12.patch]
  [- 0008-ifcheck-fix-config-changed-check-bsc-1218926.patch]
  [- 0007-Fix-ifstatus-exit-code-for-NI_WICKED_ST_NO_CARRIER-s.patch]
  [- 0006-dhcp6-omit-the-SO_REUSEPORT-option-bsc-1215692.patch]
  [- 0005-duid-fix-comment-for-v6time.patch]
  [- 0004-rtnl-parse-peer-address-on-non-ptp-interfaces.patch]
  [- 0003-rtnl-pass-ifname-in-newaddr-parsing-and-logging.patch]
  [- 0002-system-updater-Parse-updater-format-from-XML-configu.patch]
  [- 0001-fix_arp_notify_loop_and_burst_sending.patch]

-------------------------------------------------------------------
Thu Feb  1 08:58:28 UTC 2024 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- ifreload: VLAN changes require device deletion (bsc#1218927) 
  [+ 0009-ifreload-VLAN-changes-require-device-deletion-bsc-12.patch]
- ifcheck: fix config changed check (bsc#1218926)
  [+ 0008-ifcheck-fix-config-changed-check-bsc-1218926.patch]
- client: fix exit code for no-carrier status (bsc#1219265)
  [+ 0007-Fix-ifstatus-exit-code-for-NI_WICKED_ST_NO_CARRIER-s.patch]
- dhcp6: omit the SO_REUSEPORT option (bsc#1215692)
  [+ 0006-dhcp6-omit-the-SO_REUSEPORT-option-bsc-1215692.patch]
- duid: fix comment for v6time
  (https://github.com/openSUSE/wicked/pull/989)
  [+ 0005-duid-fix-comment-for-v6time.patch]
- rtnl: fix peer address parsing for non ptp-interfaces
  (https://github.com/openSUSE/wicked/pull/987,
  https://github.com/openSUSE/wicked/pull/988)
  [+ 0003-rtnl-pass-ifname-in-newaddr-parsing-and-logging.patch]
  [+ 0004-rtnl-parse-peer-address-on-non-ptp-interfaces.patch]
- system-updater: Parse updater format from XML configuration to 
  ensure install calls can run. 
  (https://github.com/openSUSE/wicked/pull/985)
  [+ 0002-system-updater-Parse-updater-format-from-XML-configu.patch]

-------------------------------------------------------------------
Wed Jul  5 08:06:15 UTC 2023 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- ifconfig: fix arp notify loop (boo#1212806) and burst sending
  [+ 0001-fix_arp_notify_loop_and_burst_sending.patch]  

-------------------------------------------------------------------
Thu Jun 15 16:15:04 UTC 2023 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- update to version 0.6.73
- spec: cleanup artefacts and fix some rpmlint warnings
- arp: allow verify/notify counter and interval configuration
- arp: handle ENOBUFS sending errors (bsc#1203300)
- extensions: improve environment variable handling
- firmware: refactor firmware extension definition
- firmware: enable, disable and revert cli commands
- code cleanup: fix memory leaks, add array/list utils
- wireless: Ignore WIRELESS_EAP_AUTH within TLS (bsc#1211026)
- cleanup /var/run leftovers in extension scripts (bsc#1194557)
- json: output formatting improvements and Unicode support
- bond: workaround 6.1 kernel enslave regression (boo#1206674)
- update to version 0.6.72
- client: add `wicked firmware extensions|interfaces|enable|disable`
  command to improve `ibft`,`nbft`,`redfish` firmware extension and
  interface handling.
- client: improve error handling in netif firmware discovery
  extension execution and extension definition overrides in
  the wicked-config.
- nanny: fix use-after-free in debug mode (bsc#1206447)
- spec: replace transitional `%usrmerged` macro with regular
  version check (boo#1206798)
- client: improve to show `no-carrier` in ifstatus output
- linux: cleanup inclusions and update uapi header to 6.0
- ethtool: link mode nwords cleanup and new advertise mode names
- update to version 0.6.71
- dhcp: enable raw-ip support for wwan-qmi interfaces (jsc#PED-90)
- schema: fix the ip rule to-selector to handle network prefixes
- spec: Add /etc/sysconfig/network to file list, no longer in the
  default list of a cleaned up filesystem package on tumbleweed
  (https://github.com/openSUSE/wicked/pull/939).

-------------------------------------------------------------------
Thu Oct 20 14:36:21 UTC 2022 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- version 0.6.70
- build: Link as Position Independent Executable (bsc#1184124)
- dhcp4: Fix issues in reuse of last lease (bsc#1187655)
- dhcp6: Add option to refresh lease (jsc#SLE-9492,jsc#SLE-24307)
- dhcp6: Remove address before release (USGv6 DHCPv6_1_2_07b)
- dhcp6: Ignore lease release status (USGv6 DHCPv6_1_2_07e,1_3_03)
- dhcp6: Consider ppp interfaces supported (gh#openSUSE/wicked#924)
- team: Fix to configure port priority in teamd (bsc#1200505)
- firewall-ext: No config change on ifdown (bsc#1201053,bsc#118950)
- wireless: Fix SEGV on supplicant restart (gh#openSUSE/wicked#931)
- wireless: Add support for WPA3 and PMF (bsc#1198894)
- wireless: Remove libiw dependencies (gh#openSUSE/wicked#910)
- client: Fix SEGV on empty xpath results (gh#openSUSE/wicked#919)
- client: Add release options to ifdown/ifreload (jsc#SLE-10249)
- dbus: Clear string array before append (gh#openSUSE/wicked#913)
- socket: Fix SEGV on heavy socket restart errors (bsc#1192508)
- systemd: Remove systemd-udev-settle dependency (bsc#1186787)

-------------------------------------------------------------------
Wed Apr 13 11:43:38 UTC 2022 - Marius Tomaschewski <mt@suse.com>

- version 0.6.69
- redfish: decode smbios and setup host interface
  Add initial support to decode the SMBIOS Management Controller Host
  Interface (Type 42) structure and expose it as wicked `firmware:redfish`
  configuration to setup a Host Network Interface (to the BMC) using the
  `Redfish over IP` protocol allowing access to the Redfish Service (via
  redfish-localhost in /etc/hosts) used to manage the computer system.
  Tech Preview (jsc#SLE-17762).
- buffer: fix size_t length downcast to uint, add guards to init functions
- wireless: fix to not expect colons in 64byte long wpa-psk hex hash string
- xml-schema: reference counting fix to not crash at exit on schema errors
- compat-suse: match sysctl.d /etc vs. /run read order with systemd-sysctl,
  remove obsolete (sle11/sysconfig) lines about ifup-sysctl from ifsysctl.5.
- compat-suse: fix reading of sysctl addr_gen_mode to wrong variable
- auto6: fix to apply DNS from RA rdnss after ifdown/ifup (bsc#1181429)
- removed obsolete patch included in the master sources (bsc#1194392)
  [- 0001-fsm-fix-device-rename-via-yast-bsc-1194392.patch]

-------------------------------------------------------------------
Wed Jan 19 16:36:28 UTC 2022 - Marius Tomaschewski <mt@suse.com>

- fsm: fix device rename via yast (bsc#1194392)
  Reset worker config instead to reject a NULL/empty config
  xml node -- introduced in wicked 0.6.67 by commit c2a0385.
  [+ 0001-fsm-fix-device-rename-via-yast-bsc-1194392.patch]

-------------------------------------------------------------------
Tue Dec 21 08:44:56 UTC 2021 - Clemens Famulla-Conrad <cfamullaconrad@suse.com>

- version 0.6.68
- sysctl: process sysctl.d directories as in sysctl --system
- sysctl: fix sysctl values for loopback device (bsc#1181163, bsc#1178357)
- dhcp4: add option to set route pref-src to dhcp IP (bsc#1192353)
- cleanup: warnings, time calculations and dhcp fixes (bsc#1188019)
- wireless: reconnect on unexpected wpa_supplicant restart (bsc#1183495)
- tuntap: avoid sysfs attr read error (bsc#1192311)
- ifstatus: fix warning of unexpected interface flag combination (bsc#1192164)

-------------------------------------------------------------------
Thu Nov  4 08:06:33 UTC 2021 - Marius Tomaschewski <mt@suse.com>

- dbus: config files in /usr shouldn't be marked as config in spec

-------------------------------------------------------------------
Fri Oct  1 14:19:44 UTC 2021 - Marius Tomaschewski <mt@suse.com>

- version 0.6.67
- dbus: install bus config in /usr (bsc#1183407,jsc#SLE-9750)
- logging: log reaped sub-process command and as debug, not error
- ifstatus: Don't show link as "up" without RUNNING flag set
- firewalld: Make the zone assignment permanent (boo#1189560)
- fsm: cleanup and improve ifconfig and ifpolicy access utils
- dbus: cleanup the dbus-service.h file and unused property macros
- cleanup: applied code-spell run typo corrections
- dracut: initial fixes and improved option handling (boo#1182227)

-------------------------------------------------------------------
Tue Jun 15 17:30:40 UTC 2021 - Marius Tomaschewski <mt@suse.com>

- version 0.6.66
- wireless: migrate to wpa-supplicant v1 DBus interface (bsc#1156920)
  - support multiple networks configurations per interface
  - show connection status and scan-results (bsc#1160654)
  - corrected eap-tls,ttls cetificate handling and open vs. shared
    wep,open,psk,eap-tls,ttls,peap parsing from ifcfg (bsc#1057592)
  - cleanups and several other improvements, see changes
  - updated man ifcfg-wireless manual pages
- nanny: fix identify node owner exit condition
- schema: several xml-schema and dbus/property improvements
- utils: format/parse bitmap to array and string alternatives
- client: expose ethtool --get-permanent-address option
- removed sle15-sp3 patches included in the master sources (bsc#1181812)
  [- 0001-dhcp4-discover-on-reboot-timeout-after-start-delay.1181812.patch]
  [- 0002-dhcp6-request-nis-options-on-sle15-by-default.1181812.patch]

-------------------------------------------------------------------
Wed Apr  7 09:54:25 UTC 2021 - mt@suse.com

- dhcp4: discover on reboot timeout after start-delay (bsc#1181812)
 [+ 0001-dhcp4-discover-on-reboot-timeout-after-start-delay.1181812.patch]
- dhcp6: request nis options on sle15 by default (bsc#1181812)
 [+ 0002-dhcp6-request-nis-options-on-sle15-by-default.1181812.patch]

-------------------------------------------------------------------
Thu Mar  4 13:35:33 UTC 2021 - mt@suse.com

- version 0.6.65
- ifconfig: differentiate if to re-trigger dad on address updates (bsc#1177215)
- client: parse sysctl files in the correct order (bsc#1181186)
- ifup: fix for set up with unenslave from unconfigured master (boo#954329)
- rpm: prepare for new builds using usrmerged rpm macro (boo#1029961)
- rpm: Let wicked-service also provide service(network)
- cleanup: remove obsolete use-nanny=false (gh#openSUSE/wicked#815)
- dbus: add variant container, generic object-path and uint32 array macros

-------------------------------------------------------------------
Wed Sep 30 16:37:00 UTC 2020 - rtorreromarijnissen@suse.com

- version 0.6.64
- avoid incomplete ifdown/timeout on route deletion error (bsc#1174099)
- dhcp4: add DHCLIENT_CREATE_CID to ifcfg (jsc#SLE-15770)
- wicked: fixes to ifreload on port changes (bsc#1168155,bsc#1172082)
- team: fix schema to use correct hwaddr_policy property (boo#1171234)
- team: enable ipv6 on ports when nsna_ping linkwatch is used (bsc#959556)

-------------------------------------------------------------------
Wed Mar  4 13:24:18 UTC 2020 - mt@suse.com

- version 0.6.63
- spec: fix old libwicked package provides/obsoletes (bsc#1165180)
- ipv6: support to apply stable secret ifsysctl (jsc#SLE-6960)

-------------------------------------------------------------------
Wed Feb 26 21:00:16 UTC 2020 - rtorreromarijnissen@suse.com

- version 0.6.62
- dhcp4: discard lease on client-id mismatch (CVE-2020-7217,bsc#1160906)
- dhcp4: free lease on response without message type (CVE-2020-7216,bsc#1160905)
- dhcp6: don't add free'd IA to ia_pd_list on T1>T2 (CVE-2019-18903,bsc#1160904)
- dhcp6: fix use-after-free on option parsing failure (CVE-2019-18902,bsc#1160903)
- utils: don't reject NULL var array names/keys breaking wicked duid dump
- routes: schema fix to avoid not applying rto_min incl. new time format (bsc#1160939)
- systemd: order start wicked after network-pre.target and openvswitch.service start
- packaging: use pkgconfig(libsystemd) instead of systemd-devel
- misc bug fixes by Malte Kraus including undefined behaviour, memory access alignment
- corrections, use-after-free, missed initialization and format errors

-------------------------------------------------------------------
Wed Dec 11 11:23:05 UTC 2019 - mt@suse.com

- version 0.6.61
- dracut: add initial cmdline parsing as a config source
- address: don't check hwaddr length if parsing as ARPHRD_VOID
- utils: added find and insert var array utils, cleanup
- client: add show-policy command calling policy generation
- client: initial support to generate a basic policy directly
- client: cleanup convert and show-config commands

-------------------------------------------------------------------
Fri Oct  4 11:41:32 UTC 2019 - mt@suse.com

- version 0.6.60
- libwicked: fix versioning and packaging (bsc#1143182,bsc#1132977)
  shipping the internal helper library inside of the wicked package.

-------------------------------------------------------------------
Thu Sep 19 16:36:26 UTC 2019 - mt@suse.com

- version 0.6.57
- dhcp6: omit noprefixroute with address-length (bsc#1150972)
  Permit to assume that the address prefix-length override specified
  in the config is a valid on-link prefix length, to let the kernel
  create a route for this prefix.
- dhcp6: differentiated mode=auto resolving from RA (bsc#1150183)
  Fixed to not trigger to report an error when ipv6 RA is not
  available or the received RA disables dhcp while mode is set to
  auto, but to deliver a 'deferred' results.

-------------------------------------------------------------------
Fri Sep  6 18:41:46 UTC 2019 - mt@suse.com

- version 0.6.56
- dhcp6: initial support to request prefix for delegations (jsc#SLE-5936)
- dhcp6: set the noprefixroute address option (bsc#1132280)

-------------------------------------------------------------------
Wed Aug 14 17:23:36 UTC 2019 - rtorreromarijnissen@suse.com

- version 0.6.55
- dhcp6: do not default to a /64 address prefix-length (bsc#1132280)
  Add an address-length aka DHCLIENT6_ADDRESS_LENGTH ifcfg option, which
  permits to specify explicit prefix-length to use for the DHCPv6 address
  and override detection using RA prefix info and a default to /128.
- time: use boot time for timer instead of real time (bsc#1129986)
- dhcp: Consistently log dhcp xid and enabled to log dhcp6 timings line.
- dhcp6: lower unexpected xid messages to debug level
- systemd: change to depend on udev settle service (bsc#1136034,bsc#1132774)
  Calling udevadm settle directly caused systemd to kill wicked services.
- bridge: honour ifcfg LLADDR and set link address (bsc#1042123,boo#1142670)
- rfkill: fix switch statement to check enum variable not a constant (bsc#1140117)
- man: ifcfg-ovs-bridge(5): recommend STARTMODE=nfsroot
- dhcp4: nullify defer timer pointer when timeout (openSUSE/wicked#798,bsc#1142214)
- dhcp4: fix to request routing options when custom options are used (bsc#1132326)
- testing: add ifbind.sh helper script allowing to test hotplugging

-------------------------------------------------------------------
Fri Apr  5 13:17:07 UTC 2019 - mt@suse.de

- version 0.6.54
- switch to use systemd notify and prevent event backlog at start
  by calling udevadm settle before starting wickedd (bsc#1118206)
- dhcp6: don't discard confirm reply without status (bsc#1127340)
- ethtool: set lro legacy flag and not txvlan (bsc#1123555)
- init memory before use in ioctl
- fsm: fix find pending worker loop segfault (boo#1106809)

-------------------------------------------------------------------
Thu Jan 24 17:50:03 UTC 2019 - rtorreromarijnissen@suse.de

- version 0.6.53
- dhcp: request hostname/fqdn option in the tester (bsc#1118378)
- build: link with relro by default for binary hardening

-------------------------------------------------------------------
Fri Nov 16 11:38:24 UTC 2018 - mt@suse.de

- version 0.6.52
- wickedd: fix netdev detection bootstrap race (bsc#1107579)
- compat: fix ifcfg parsing crash if network/config is missed

-------------------------------------------------------------------
Fri Oct 26 12:36:25 UTC 2018 - mt@suse.de

- version 0.6.51
- wireless: fix eap peap auth mapping for wpa-supplicant (bsc#1026807)
- vxlan: fix to convert dst_port to network byte order

-------------------------------------------------------------------
Fri Oct  5 11:06:49 UTC 2018 - rtorreromarijnissen@suse.com

- version 0.6.50
- firewall: do not assign default zone, but pass as is (bsc#1109147)
- nanny: fix memory leaks on fast create-delete calls (bsc#1095818)
  + fsm: cleanup worker reset (reinit) vs. free
  + fsm: do not process or pass pending workers to nanny
  + nanny: catch init failures in device registration
  + netdev: allow NULL in get and put functions
  + model: fix to call (netif) dbus object destructors
  + model: removed server specific call in netif destroy
  + fsm: handle NULL in worker get and release calls
  + fsm: process device delete event separately
  + calls: split get netif service and netif list utils
  + xml-schema: fix range constraint values parsing
  + xml-schema: remove underscores from ni_xs_type_new
  + xml-schema: fix type leak around ni_xs_build_one_type
  + fsm: free worker control mode on worker free
  + xpath: trace and free complete xpath expression tree
  + nanny: fix config leak in ni_nanny_recheck_policy
  + dbus: free pending call in ni_dbus_connection_call
  + dbus: free dbus_message_iter_get_signature result

-------------------------------------------------------------------
Fri Sep 21 14:27:21 UTC 2018 - rtorreromarijnissen@suse.com

- version 0.6.49
- dhcp6: fix to properly decline dynamic addresses
- extensions: do not use /etc/HOSTNAME artifact (bsc#972463)
- ethtool: call offload ioctl if requested by offload name,
  e.g. tso has been split into several features and the
  old STSO offload ioctl sets multiple features at once.
- ethtool: add missing pause support (bsc#1102871)
- dhcp6: refresh info using rfc4242 info-refresh-time
- dhcp6: add ia and ia addr list search utilities, improve
  status utils and use timeval struct in ia acquired times
- dhcp6: restart on NotOnLink status request reply
- ifcfg: show unknown/invalid bootproto as error
- dhcp6: Fix server preference and weight option behaviour
- dhcp6: retrigger duplicate detection on all address updates
- man: add ifcfg-lo.5 manual page
- man: add missing documentation for DHCLIENT6_CLIENT_ID
- man: improved create-cid docs in wicked-config(5) (bsc#1084527)

-------------------------------------------------------------------
Fri Jun  1 16:15:28 UTC 2018 - ndas@suse.de

- version 0.6.48
- address cache-info and lease acquisition time fixes and cleanups
- ethtool: streamline options available on all devices (bsc#1085786)
- dhcp4: expose broadcast response as DHCLIENT_BROADCAST in ifcfg

-------------------------------------------------------------------
Fri Mar 23 16:56:33 CET 2018 - ndas@suse.de

- version-0.6.47
- ipoib: do not fail setup on mode or umcast set failure (bsc#1084462)
- bond: avoid reenslave failure in fail_over_mac mode (bsc#1083670)
- Fix show-xml filtering by interface name (issue #735,bsc#954758)

-------------------------------------------------------------------
Fri Mar 16 16:34:59 CET 2018 - ndas@suse.de

- version-0.6.46
- ifconfig: refresh state before link reenslave hotfix (bsc#1061051
- ethtool: query priv-flags bitmap first (bsc#1085020)
- util: fix a memory leak in ni_var_array_free
- client: refactor arp utility to add missed arp ping (bsc#1078245)
- dbus: omit zero-length hwaddr data properties

-------------------------------------------------------------------
Mon Feb 26 07:24:07 UTC 2018 - mt@suse.de

- version 0.6.45
- ibft: no IP setup on bnx2x storage-only interfaces (bsc#1072343)
- fixed format, self compare and always true issues

-------------------------------------------------------------------
Fri Feb  2 15:26:32 UTC 2018 - mt@suse.de

- version 0.6.44
- dhcp4: use rfc4361 client-id as new default for ethernet on sle15
  (fate#323576). It can be also enabled/disabled in wicked-config(5).
- client: fixed broken wicked arp utility command (bsc#1078245)
- cleanup: add missing/explicit designated field initializers
- pkgconfig: fix to request libnl3 instead of libnl1
- dbus: add missing DBUS_ERROR_FAILED type to a dbus_set_error call
  and enforce formatting input as string when an extension did not
  returned any error message.
- Removed patch included in the source archive
  [- 0001-wickedd-explicitly-unbind-slaves-on-deletion.patch]

-------------------------------------------------------------------
Thu Dec 21 11:49:14 UTC 2017 - mt@suse.de

- wickedd: clear master references on slaves when a master gets
  deleted and the deletion event arrives before unenslave event
  to avoid a bridge reenslave failure on restart (bsc#1061051).
  [+ 0001-wickedd-explicitly-unbind-slaves-on-deletion.patch]

-------------------------------------------------------------------
Sat Dec 16 01:34:13 UTC 2017 - mt@suse.de

- version 0.6.43
- ifconfig: set MTU even if device is up (bsc#1059292)
- dhcp6: reapply confirmed addresses, also on any confirm
  status other to not-on-link

-------------------------------------------------------------------
Fri Dec  1 12:44:34 UTC 2017 - mt@suse.de

- version 0.6.42
- spec: use new _fillupdir macro for fillup-templates (boo#1069468)
- dhcp: clear hostname on lease recovery/reboot (bsc#1057007)
- firewall: add firewalld and zone support (fate#320794)
- ifconfig: cleanup slaves before enslaving (bsc#1036675)
- ethtool: add rxvlan, txvlan, ntuple and rxhash offloads
- ethtool: handle channel parameters (bsc#1043883)

-------------------------------------------------------------------
Fri Jul 28 14:09:39 CEST 2017 - ndas@suse.com

- version 0.6.41
- dhcp6: fix to send up to 5 release retransmissions
- ifconfig: do not stop adding routes on one bad route (bsc#1036619)
- dhcp4: fix to use rfc4361 client-id on infiniband (bsc#1022872)
- man: ifcfg.5: Fix directory name for compatibility scripts
- dhcp4: own check for user class id strings (bsc#1045522)
- dhcp: cleanup common option update flags (bsc#1027099)
- vxlan: convert ifcfg VXLAN_REMOTE_IP to remote-ip

-------------------------------------------------------------------
Thu May  4 12:56:33 UTC 2017 - mt@suse.de

- version 0.6.40
- fsm: clone bound config and cleanup references fixing ifindex
  reference handling in iBFT vlan configuration (bsc#1030053)
- updater: fix to not leave orphaned bg jobs on device delete,
  causing to block processing of synchronized jobs (bsc#1029133)
- vxlan: initial support (boo#1026780)
- dhcp: correct and complete fqdn option support (bsc#1025757)
- bonding: properly send primary reselect to kernel (bsc#1027231)
- dbus: fix caller-uid timeout to 15sec, not 15ms (bsc#1026683)
- ethtool: handle ring,coalesce,eee parameters (bsc#1007909)
- bond: fix xmit-hash-policy option mismatch (bsc#1021914)
- ifconfig: avoid timeouts on large number of IPs by performing
  ipv4 duplicate address detection, apply and sending gratuitous
  ARP for chunks of multiple addresses at once (bsc#1009801)

-------------------------------------------------------------------
Fri Nov 18 12:08:22 UTC 2016 - mt@suse.de

- version 0.6.39
- dhcp: support to define and request custom options (bsc#988954),
  documented in wicked-config(5) and ifcfg-dhcp(5) manual pages.
- dhcp6: fix refresh on newprefix workaround (boo#972471)
- dhcp4: do not fail in capture on link type change (bsc#975466)
- dhcp4: ignore invalid options, do not discard complete message
  (https://github.com/openSUSE/wicked/issues/671)
- dhcp4: log and add sender (server or relay) ethernet hw-address
  to the lease (https://github.com/openSUSE/wicked/issues/663)
- ifdown: show reasons to skip an action (bsc#997027)
- ifconfig: fix to consider address scope in dbus model (bsc#988794)
- bonding: set the primary slave in the master at enslave of the
  primary when it were not yet ready while bond setup (bsc#998413)
- removed patch included in this version
  [- 0001-dhcp-fixed-to-properly-append-dhcp-option-data.patch]

-------------------------------------------------------------------
Mon Oct 10 18:42:38 CEST 2016 - ndas@suse.com

- dhcp: fixed to properly append dhcp option data.
  Bug introduced by changes applied in version 0.6.37 (bsc#988954).
  [+ 0001-dhcp-fixed-to-properly-append-dhcp-option-data.patch]

-------------------------------------------------------------------
Mon Sep 26 15:59:50 UTC 2016 - mt@suse.de

- version 0.6.38
- addrconf: rewrite to run lease updates in background jobs and use
  netconfig 0.84 batch support if available (bsc#989741).
  Fixed auto4 and dhcp supplicants to explicitly stop device before
  unregistering dbus object to disarm it and return release request
  result before sensing the released event.
  Fixed fsm to not advance fsm state on unrelated events and use new
  call to refresh addresses from kernel for tentative checks in ifup.

-------------------------------------------------------------------
Tue Aug  2 19:59:07 CEST 2016 - ndas@suse.de

- version 0.6.37
- auto6: do not apply rdnss/dnssl if autoconf=0 (bsc#984088)
- addrconf: utility to parse string with update flags
- leasefile: added an lease file exists utility
- ifstatus: show IPv6 privacy addresses as autoconf
- updater: adjusted system settings update debug info
- updater: no remove before install on granted lease
- updater: no backup/restore for netconfig, unused
- updater: no warning on unset optional backup/restore
- man: added DHCLIENT_REQUEST_OPTION to ifcfg-dhcp
- leaseinfo: dump other/unknown dhcp options
- dhcp4: initial support to request custom options (bsc#916948,bsc#988954)
- lease: store and load other/unknown dhcp options
- utils: fixed last byte formatting in ni_format_hex
- dbus: handle unparsed dhcp options in leases
- dhcp4: store unparsed options in the lease
- addrconf: add generic dhcp options to lease
- dhcp: move specific dhcp.h to dhcp4.h and dhcp6.h
- ovs: use generic ovs type until we can query ovs (bsc#982231)
- dhcp4: send hostname in discover (bsc#985894)
- ifconfig: fixed to apply address preferred_lft 0
- address: apply suse ifcfg IP_OPTIONS (bsc#984088)
- config: add a global LINK_REQUIRED ifcfg default
- client: apply global LINK_REQUIRED setting if any

-------------------------------------------------------------------
Fri Jun 10 14:47:38 UTC 2016 - ndas@suse.de

- version 0.6.36
- ifreload: make output more informative (bsc#982952)
- rules: do not fail when kernel support is missed (bsc#981887)
- nanny: reapply policies on device renames (bsc#973355)
- iflist: fixed macvlan/macvtap link info data parsing
- auto6: apply rdnss/dnssl and wait for autoconf (bsc#902897,boo#916613)

-------------------------------------------------------------------
Fri May 27 09:38:12 UTC 2016 - mt@suse.com

- version 0.6.35
- spec: removed ppp service template macro calls (fate#317976)
- bonding: support for new v3.7.1 netlink options in 4.4 kernel
- linux: update included headers to 4.4, add if_addr.h

-------------------------------------------------------------------
Fri May 20 13:29:49 UTC 2016 - pwieczorkiewicz@suse.com

- version 0.6.34
- utils: fix for ni_string_set to set empty pointers
- team: fix for unclosed file descriptor and string memleak
- ppp: initial implementation of PPPoE support
  (fate#317976,bsc#865573,boo#913861)

-------------------------------------------------------------------
Wed May  4 09:31:11 UTC 2016 - mt@suse.de

- version 0.6.33
- route: initial routing policy rules support (fate#312217)

-------------------------------------------------------------------
Fri Apr 15 15:40:07 UTC 2016 - mt@suse.de

- version 0.6.32
- tunnel: add device binding support (fate#317977)
- gre: fix flags use, added missed keyed gre options
- doc: added an initial FAQ to the documentation
- util: fix null string and string array in compare
- ipv6: cleaned up IPv6 RA PI and RDNSS processing
- ipv6: receive IPv6 RA DNSSL options forwarded by kernel
- dhcp6: refresh ipv6 link on each prefix event to fix workaround
  for missed NEWLINK event on changes caused by RA (boo#972471).
- macvlan: fix enum values for BRIDGE and PASSTHRU modes (boo#974231)

-------------------------------------------------------------------
Tue Apr  5 13:50:07 UTC 2016 - mt@suse.de

- version 0.6.31
- xml: fix to not assert on too long entities or missed semicolon
  and fixed pointer use on DOCTYPE related parse error.
- ifconfig: re-add broadcast calculation (bcs#971629).
  While the kernel does not need it and calculates itself, e.g.
  glibc getbroadcastnets function used by yp expect it to be set.
- ifup: let ovs bridges pull ovs-system config and omit ovs-system
  master reference in policy match (bsc#964019)
- fsm: fixed a negated check causing a segmentation fault in some
  cases where the vlan config references a device without config.
- bonding: call setup routine at the end of create (bsc#964877),
  fixed mismatched carrier-detect and validate-targets attributes
  in schema and dbus, permit to set bonding's hardware address,
  process bonding settings in newlink events and switched to create
  and setup also bonding the master device via netlink by default.
- xml-schema: do not add description node to enums
- ifreload: let ifdown delete team instances (bsc#954012,bsc#964477)
- fsm: reset device_api of deleted workers (bsc#954012)
- removed patch included in the source archive
  [- 0001-fsm-do-not-use-master-name-after-reset-bsc-959356.patch]
 
-------------------------------------------------------------------
Mon Feb 22 12:24:21 UTC 2016 - pwieczorkiewicz@suse.com

- fsm: do not segfault on device hierarchy loops (bnc#959356);
  corrected pull#618 fix to not reset master and use its name then.
  [+ 0001-fsm-do-not-use-master-name-after-reset-bsc-959356.patch]

-------------------------------------------------------------------
Fri Jan 29 12:32:20 UTC 2016 - mt@suse.de

- version 0.6.30
- wireless: fix EAP inconsistencies and add missing auth method
  names to translation maps (bsc#936514, boo#927615).
- ipv6: clear old address list before applying new fixing to not
  wait full time in the client-side tentative address check
- fsm: do not segfault on device hierarchy loops but (bnc#959356)
- fsm: handle down/step back events in ifup flow instead to try to
  workaround in nanny (bsc#955864).
- man: documented how to declare several team link watches.
- ethtool: map da,none,other port types (bsc#957944).
- ipv4: removed pointless broadcast calculations and send to the
  kernel only if explicitly requested in ifcfg file or by dhcp
  options. The kernel has an own logic to automatically calculate
  related settings as needed. Also removed broadcast setting from
  ifcfg-lo to not override kernel's setup (bsc#944710).

-------------------------------------------------------------------
Fri Nov 20 17:06:10 UTC 2015 - mt@suse.de

- version 0.6.29
- rpm: do not use systemctl show in scripts (bsc#955778)
  systemctl show makes a systemd query and does not work in
  a chroot or when systemd is not available and using it in
  RPM scripts breaks offline update. Replaced with readlink.
- team: fix to use proper names of ethtool delay options
- nanny: skip recheck when no policy configured (bsc#953107)

-------------------------------------------------------------------
Thu Nov 12 16:19:49 UTC 2015 - mt@suse.de

- version 0.6.28
- fsm: dynamically resolve references and requirements (bsc#954289)
- nanny: do not pull in and rearm subordinate workers (bsc#954289)
- nanny: fix managed policy list handling (bsc#953107)
- ifup: do not update policy when it has been created and recheck
  with a name filter list instead to enable separately to avoid a
  race condition (bsc#953107)
- ovs: do not require link on ovs-system device

-------------------------------------------------------------------
Thu Oct 22 09:53:35 UTC 2015 - mt@suse.de

- version 0.6.27
- nanny: fix policy file reading and objects references (boo#916035)
- ovs: use --may-exist option in add-port (bsc#951315) commands to
  avoid error messages when the port is already in the db.
- netconfig: do not refresh unrelated details in supplicants
- service: fixed wicked client and nanny dependencies (bsc#950333).
- service: restart wickedd* on dbus restart (bsc#941964)
- fsm: do not follow link-up checks on configured master devices
  not involved in the current ifup operation (bsc#948423).
- client: added more comfortable "wicked test dhcp[46]" commands
  executing the wickedd-dhcp[46] in their --test mode (bsc#942278)

-------------------------------------------------------------------
Fri Oct  9 14:10:06 UTC 2015 - mt@suse.de

- version 0.6.26
- nanny: add link device references to policy match (bsc#941611)
  This causes, that nanny checks and waits until the configuration
  for link references is applied by ifup (master device worker is
  available) in order to not start managing ports/slaves and fail
  on unresolvable requirements with "document error" first.
  Unavailable reference matches caused a timing race, where nanny
  omits to enslave ports into master (e.g. a dummy into ovsbr),
  but was not limited to ovs setups.
- dhcp4: fix to request offer by default in --test (bsc#942278)
- teamd: adjust permissions of the teamd interface config to be
  owned by teamd user if available and to always re-read dbus
  busname from the service file (bsc#947542)

-------------------------------------------------------------------
Fri Sep 25 11:21:26 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.25
- compat: read complete sysctl file set (bsc#928459)
- wireless: fixed to parse/format hex escapes in essid (bsc#928459)

-------------------------------------------------------------------
Thu Sep 17 16:58:11 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.24
- auto4: initial autoip and dhcp4 fallback fix (bsc#899985)
- ethtool: update to the most recent ethtool.h, fixed
  advertised mode and flags (bsc#927309)
- dhcp4: verify received client-id, accept hex encoded id
- ovs: fixes for ovs bridge handling
- make: fixed to add linux header copies as noinst 

-------------------------------------------------------------------
Mon Sep  7 14:42:45 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.23
- ovs: initial openvswitch bridge support (fate#318840)
- team: fix segfault on discovery failure
- nanny: register device object also on device-up event

-------------------------------------------------------------------
Tue Sep  1 09:06:56 UTC 2015 - mt@suse.de

- version 0.6.22
- fsm: do not run post-up scripts when leases defer (bsc#940239)
- team: configurable teamd support and ctl detection (fate#318389)
  [- 0001-teamd-create-teamd-run-directory-when-missed.patch]

-------------------------------------------------------------------
Thu Aug 20 15:25:08 UTC 2015 - pwieczorkiewicz@suse.com

- Add 0001-teamd-create-teamd-run-directory-when-missed.patch:
  Make sure /run/teamd directory is created on config generation.

-------------------------------------------------------------------
Wed Aug 19 17:22:25 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.21
- team: initial team device support (fate#318389)
- ifstatus: fixed error return code and quiet option (bsc#939142)

-------------------------------------------------------------------
Fri Jul 31 16:41:26 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.20
- spec: enable nanny use by default (fate#318977)
- ifconfig: handle link up of externally enslaved devices
  (fate#318840) 
- ifcfg: generate link master from master config,
  added MASTER_DEVICE variable
- fsm: master/slave transition dependency and state check fixes
- fsm: improve subordinate device relation updating and logging
- fsm: reference count config nodes to avoid memleaks
- ethtool: fix option tables terminator (bsc#925276)
- scripts: fixed typo breaking wicked scheme scripts
- sysfs: fixed memleak while reading device path
- client: client: config parsing, origin processing, root-directory
  cleanup and memory leak fixes.
- xml: fixes to memory leaks, location functions cleanup
- firmware: properly extract discovery type and path 

-------------------------------------------------------------------
Fri Jul  3 14:35:02 UTC 2015 - mt@suse.de

- version 0.6.19
- dhcp4: improve invalid dhcp options handling (boo#918069)
- dhcp6: just drop an info lease on release request and stop
- dhcp6: refresh ipv6 link on newprefix in auto mode to
  workaround, that the kernel does not send us events about
  mode change when RA timers are unspecified (bsc#934067)
- ethtool: do not warn when reading ethtool settings while
  netlink newlink processing and the device is already gone.
- ibft: ignore invalid default gateway (0.0.0.0 and ::)
  provided by the firmware (bsc#903759)
- wireless: handle ANY for WPA-EAP methods and send passwd
  when phase2 method isn't set (boo#927615)
- bonding: don't insist, that arp_validate=none default is
  valid in active-backup mode only (boo#919573)
- wickedd: fix to send requested device-up event ack
- nanny: fix error handling for NULL policy objects and fix
  to not compare iftype to a dbus class name (boo#931288)
- nanny: ensure a device is ready to satisfy a policy match
- nanny: fixes improving delete and hotplug handling
- ifup: do not recurse when generating nanny policy matches
- ifreload: properly handle some config rename cases
- fsm: ensure to process events in order and don't advance
  fsm state from events when device state outdistances it.
- schema: cleanup netif-reference meta:require checks.
- spec: require util-linux-systemd providing logger (bsc#911310)
- conditionally enable nanny use (boo#915025,bsc#916402)

-------------------------------------------------------------------
Sat Apr 25 00:18:30 UTC 2015 - mt@suse.de

- version 0.6.18
- initial pre/post-up/down script and systemd service start support
  (bsc#920070,boo#907215)
- fixed lease address owner and lifetime tracking to update address
  lifetimes on dhcp6 renewal, correctly drop (requesting/deferred)
  leases in wickedd not (yet) existing as lease in dhcp supplicants
  and avoid address exists error messages (bsc#920889,bsc#907694)
- add missed wpa_supplicant's wireless mode names (bsc#927616)
- schema: require macvlan lower device same as vlan (bsc#927065)
- fixes to use only ready devices by name to avoid dependency
  confusion mapping config to wrong device, event races and wrong
  use of the link-up instead of the wireless link-associated event
  (bsc#918662,bsc#921218).

-------------------------------------------------------------------
Mon Feb 23 09:44:07 UTC 2015 - rguenther@suse.com

- Build with -std=gnu89 to deal with GCC 5 defaulting to -std=gnu11
  and that changing the semantics of 'inline'

-------------------------------------------------------------------
Thu Feb 19 10:43:23 UTC 2015 - pwieczorkiewicz@suse.com

- version 0.6.17
- nanny: fixed a memory-leak on policy load failure
- wickedd: fixed broken dummy0 autocreation workaround

-------------------------------------------------------------------
Tue Feb 17 10:21:16 UTC 2015 - mt@suse.de

- version 0.6.16
- ifreload: segfault fix to require argument for --timeout option
- client/nanny: initial handing of link-detection/require-link and
  timeout control flags (LINK_REQUIRED, LINK_READY_WAIT variables in
  suse ifcfg) to continue setup without ready link when requested in
  the config or based on device requirements (bsc#911562,bsc#914792).
- client/nanny: wait for event ACKs from wickedd instead to continue
  on successful request results where possible, to minimize the risk
  of an event backlog (bsc#905421).
- client/nanny: fsm timer and cleanup related fixes and improvements,
  fix to use "device-setup" (MAC, bond/bridge options, ...) as state
  name instead of "device-up" and use "device-up" as state when the
  device/link is administratively set UP. Separated waitLinkUp method
  to wait for link/carrier from linkUp setting it administratively UP.
- wickedd: fix to handle automatically created dummy0 interface
- wireless: consider auth-proto parameter (wpa1|wpa2) (bsc#911299)
- ipv6: add accept-dad sysctl support, fix accept-ra constants
- dhcp4: do not set/query mtu if set in the config (bsc#904323)
- dhcp4: limit MTU to be lower-equal 576 as before
- dhcp4: completed user-class option support permitting an rfc3004
  formatted option or as non-rfc, but widely used string (bsc#909307)

-------------------------------------------------------------------
Fri Jan 23 13:05:39 UTC 2015 - mt@suse.de

- version 0.6.15
- nanny: use ifindex to reference workers in managed devices
  and hold worker references when starting fsm (bsc#904061)
- nanny: Always reference mdev's worker by ifindex (bsc#904061)
- nanny: register discovered devices only when ready (bsc#904061)
- events: query and update device name on events (bsc#904061)
- udev: verify netdev index and update name at start, disable
  ready handling if udev is not used, e.g. in LXC (bug#904061)
- xml: don't require parent's control node in config (bsc#901517)
- wireless: use string dict entry for WIRELESS_AP/bssid (bsc#911315)
- extensions: fixed false errors from hostname update (bsc#910323)
- tuntap: typo fix causing to not set IFF_NO_PI flag
- fixed some memory leaks in client and dbus object code
- doc/ChangeLog: do not omit merge commits which contain bug refs

-------------------------------------------------------------------
Fri Dec 19 11:53:58 UTC 2014 - mt@suse.de

- version 0.6.14
- client: fixed segfault in status (bsc#908554)
- bonding: add new/missed bonding options (bsc#905750)
- systemd: service ordering dependencies (bsc#895600,bsc#901337)

-------------------------------------------------------------------
Mon Dec  8 18:13:06 UTC 2014 - mt@suse.de

- version 0.6.13
- sysctl: do not fail on read-only proc e.g. in LXC (bsc#904432)
- netlink: recover from netlink event socket errors and allow to
  configure the event socket buffer sizes (bsc#905421)
- fixed some memory and a file descriptor leak
- bonding: add encap2+3 and 3+4 xmit-hash-policies (bsc#905750)
- client: apply suse ifcfg alias label (bsc#907683)
- netlink: retry on DUMP_INTR and AGAIN (bsc#904776)
- gcrypt: do not fail when wicked has been build using a newer
  but compatible library than the currently used (bsc#906217)
- compat: use info level on unspecified ip (bsc#904903)
- compat: fix tap group node generation (bsc#904380)
- sit,ipip,gre: generate tunnel config on change (bsc#901402)
- fsm: always refresh worker on device-ready event and match only
  ready devices against config workers (bsc#904061)
- fsm: perform tentative check on all started interfaces with
  nanny (bsc#900951)

-------------------------------------------------------------------
Fri Oct 10 12:06:15 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.6.12
- ethernet: Do not fail when ETHTOOL_GSET/SSET fails
  (bnc#900401, bnc#900112)
- dbus: omit ethernet speed, duplex, autoneg properties if not
  supported by the driver
- ethtool: independent ioctl requests are handled separately: 
  if one fails it does not stop the following ones
- wireless: request assosciation even if link was up; linkup
  indicates assosciation, rather than explicit linkAssosciate
  event (bnc#893665)
- bonding: ignore redundant slaves in configs with a warning
- fsm: Generate default config for children in existing relation
- compat: prefer /etc/hostname over /etc/HOSTNAME and warn about
  missed global configs (bnc#887910)

-------------------------------------------------------------------
Fri Sep 26 14:50:43 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.6.11
- client-state: Do not fail on parsing empty origin and uuid
  (bnc#890084)
- hwaddr: change hwaddr only when valid (bnc#898622)
- ifup/ifstatus: no failure report on failed/deferred lease,
  correctly OR grouped lease status (bnc#896188)
- ifup,ifreload: wait for all tentative addresses
- config: improved allowed update mask/defaults
- man: added startmode hotplug and use-nanny (bnc#896403),
-      Introduce ifcfg-dhcp man page covering DHCLIENT and
       DHCLIENT6 vars, remove template reference from ifup(8),
       ifcfg-wireless(5), reference ifcfg-dhcp(5)
- README: updated / improved
- rpm: dbus policies as noreplace config (bnc#897775),
       reload dbus in wicked-service post-install (bnc#897775)
- fsm: corrected device hierarchy structure print
- routes: generate routes also without IP (bnc#895219),
          show a note about not matching routes (bnc#895219)
- ethernet: lower ethtool not supported messages to debugs

-------------------------------------------------------------------
Fri Sep 19 14:16:26 UTC 2014 - mt@suse.de

- version 0.6.10
- ifconfig: apply address lease priorities same as for routes
  to dhcp6 to takeover addresses from guessed lower-priority
  leases e.g. after restart and adjust lifetime on renewal.
- routes: lookup and accept custom table names defined in the
  /etc/iproute2/rt_tables file and set forgotten route table
  netlink attribute if provided by the kernel (bnc#885007).
- ethernet: do not fail when some ethtool operation is not
  supported (bnc#897264)
- fsm: add link-masterdev relation when all dependencies are
  already created and detect existing/conflicting masterdev
  references.

-------------------------------------------------------------------
Wed Sep 17 11:12:57 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.6.9
- ifstatus: address status reporting improvements, adding --verbose
  parameter
- addrconf: correctly fetch lease info flags, disarmed old auto6
  code, added prerequires (bnc#894885)
- fsm: Do not destroy schema requirements on rearm
- ipv6: added accept-ra sysctl support, auto6 code clean-up
- ifconfig: fixed lease updater allocation

-------------------------------------------------------------------
Tue Sep 16 03:25:28 UTC 2014 - mt@suse.de

- version 0.6.8
- ifup,reload,status: return setup-in-progress code,
  fix exit code override when systemd in picture and
  disable pulling device status from addresses
- ifstatus: report slaves device as enslaved
- fixed to not reset master device name on success
- lower printout of debug messages (bnc#891036)
- nanny: correctly initialize timeout variable to
  busy wait instead to wasting cpu using poll with
  a 0 timeout (bnc#895970)

-------------------------------------------------------------------
Wed Sep 10 09:34:53 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.6.7
- config: fixed optional include attribute parsing bug introduced 
  in version 0.6.6 and causing wicked to fail while config parsing. 
- util: install signal handlers only once

-------------------------------------------------------------------
Tue Sep  9 15:20:02 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.6.6
- Add wake-on-lan support (bnc#869114)
- ifconfig: delete address first if address differs (bnc#890406)
- config: support a local.xml file, clean-up of config file syntax
- man page wicked-config.5 update
- Clean-up and removing unused functions

-------------------------------------------------------------------
Fri Sep  5 15:14:37 UTC 2014 - mt@suse.de

- version 0.6.5
- nanny: fixed to reset on rearm and to hotplug bonding slaves
  (bnc#884012,bnc#880515)

-------------------------------------------------------------------
Wed Sep  3 22:34:51 UTC 2014 - mt@suse.de

- version 0.6.4
- dhcp6: changed --test to request in auto mode, recheck RA
  and try to start on new device-change events (bnc#889981)
- address: enable events in wickedd and expose flags to make
  them visible and up-to-date in ifstatus (bnc#889981)
- nanny: reset/rearm on enable/disable, do not arm at all
  when the use-nanny is false (bnc#891045)
- leases: intrinsic lease installation hook improvements as
  preparation for PPPoE support (bnc#865573)
- dhcp4: do not release and remove lease without request
  (DHCLIENT_RELEASE_BEFORE_QUIT), randomized startup delay
  (DHCLIENT_SLEEP) if enabled, handle defer timeout to stop
  client waiting at ifup (DHCLIENT_WAIT_AT_BOOT), rebind and
  reboot state fixes (bnc#866994)

-------------------------------------------------------------------
Mon Sep  1 19:25:47 UTC 2014 - mt@suse.de

- version 0.6.3
- client/nanny: lease handling/status fixes (partial bnc#891045),
  do not fail when slave/port is missing (bnc#889666,bnc#890275)
- ifstatus: Do not check for config files (bnc#889666,bnc#890275)
- dhcp4: advance secs field for dhcpd min-secs (bnc#889314),
  retransmit DHCP4 renewals enter reboot state with valid lease.
- ifevent: increase netlink socket recv buffer size (bnc#884012)
- ipv6: wait for addresses to become usable (bnc#882259)
- fixed completed sit/gre/ipip tunnel support
- dhcp6: initial defer handling and no-addr cleanup (bnc#891045)
- dhcp: apply suse ifcfg dhcp options (bnc#866994)
- ifup/reload: use default timeout if 0 (bnc#892486)

-------------------------------------------------------------------
Mon Aug 18 12:14:08 UTC 2014 - mt@suse.de

- version 0.6.2
- nanny: disable nanny use by default again (bnc#891045)
- fsm: generate default configs for ports/slaves (bnc#889666)
- dbus: increase signal/default call timeouts (bnc#890084)
- dhcp4: pad dhcp4 packet to correct minimal len (bnc#882561)
- dhcp4: apply interface MTU provided by server (bnc#890230)

-------------------------------------------------------------------
Wed Aug  6 18:02:32 UTC 2014 - kmroz@suse.com

- version 0.6.1
- nanny: Do not call link monitor on enable() (bnc#884012, bnc#890643)
- bridge,bond: Add only device-ready ports/slaves
- ifup,ifdown,ifreload: correct command status display messages
- fsm: Add new, free, clone functions for ifworker arrays
- client-state: Allow printing empty origin and UUID (bnc#890084)

-------------------------------------------------------------------
Fri Aug  1 13:02:20 UTC 2014 - mt@sue.de

- version 0.6.0
- client: added missed ifcfg remote-ip route match (bnc#889801)
- client: ifstatus/reload/up status reporting fixes (bnc#876845)
- client: calculate additional bridge STP timeouts (bnc#888323)
- nanny: do not use fsm default but infinite timeout (bnc#876845)
- nanny: save and load policies on restart to recover (bnc#876845)
- server: client configuration state load/save fixes (bnc#876845)
- ifconfig: fixed to close tun/tap device descriptor (bnc#889326)

-------------------------------------------------------------------
Thu Jul 24 16:23:53 UTC 2014 - mt@suse.de

- version 0.5.38
- dhcp4: wait and discover if unable to rebind/reboot.
- ifreload: fixed to use nanny ifup flow when enabled,
  fire nanny in down part, initial status info cleanup
  (bnc#880515,bnc#884012)
- ifup/ifreload: apply wait-for-interfaces (bnc#888323)
- wickedd: fixed to process complete device state event
  change transitions, avoiding manual refreshes breaking
  them where possible (bnc#880515,bnc#884012)

-------------------------------------------------------------------
Wed Jul 23 13:22:44 UTC 2014 - mt@suse.de

- version 0.5.37
- nanny: enabled nanny use for hotplugging (bnc#880515)
  To disable again in case of trouble, edit /etc/wicked/common.xml
  and set <use-nanny>false</use-nanny>, restart wickedd.service
  and execute "wicked ifup all" to start the interfaces directly.
- ifdown: flush addrs and routes on device-down (bnc#885236)
- dhcp6: do not break ifdown if release fails (bnc#884012)
  When the interface is not ready to send out a lease release,
  commit the lease drop and notify wickedd, so ifdown goes on.
- ifup: update client-info and client-state on device-ready,
  do not detect persistence but set if requested only (bnc#876845).

-------------------------------------------------------------------
Mon Jul 21 18:23:54 UTC 2014 - mt@suse.de

- version 0.5.36
- ifup/nanny: refresh state data when address event arrives
  to have complete lease data for status evaluation on timeout
  (bnc#884012,bnc#876845)
- nanny: make policy application mechanism aware of children
  dependency, fixed ifcondition child handling.
- ibft: enable ipv6, use sysfs prefix-len (bnc#887542)

-------------------------------------------------------------------
Fri Jul 18 10:16:12 UTC 2014 - mt@suse.de

- version 0.5.35
- dhcp4: fix routes with gateway on other network than IP address
  and use address class based netmask if it is missed (bnc#887586)
- route,address: check also gw address to set scope correctly and
  omit sending a broadcast when equal to IP address (bnc#887586)
- ethtool: fix to set link speed, duplex and port options
- iflist: fix link type detection for tap devices (bnc#887564)
- ifup/reload: status reporting and complex device hierarchy fixes

-------------------------------------------------------------------
Tue Jul 15 07:50:55 UTC 2014 - mt@suse.de

- version 0.5.34
- dhcp6: do not fail on read-only root-fs (bnc#885625)
- leases: fallback to statedir on read-only fs (bnc#885625)
- ifreload: hierarchy and multiple devices fixes
- ifreload: more diagnostic messages (bnc#882311)
- man: ifcfg(5) document update

-------------------------------------------------------------------
Fri Jul 11 13:54:32 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.5.33
- capture: lower to debug on reconfig changes device type (bnc#880700)
- policy: add <child> node for policy <match> condition checking
- client: do not apply NULL config to nanny and segfault
- client: lowering log level of "skipping" messages
- server: lookup using link not the hwaddr type
- dhcp6: use RA prefix len if available (bnc#885234)
- iflist: fixed to use proper kind mapping, cleanup, refactoring
- fsm nanny: fix handling of DEVICE_DOWN event
- nanny: adapt recheck to handle hotplug devices
- nanny: schedule recheck on new device when policy exists
- nanny: Change managed and factory up functions
- nanny: Disable unnecessary schedule recheck calls
- nanny: Fix handlin DEVICE_CREATE and DEVICE_READY events
- fsm: ni_fsm_build_hierarchy destructive switch
- nanny: Trigger recheck on factory devices from create policy
- client: include and sort children using nanny
- fsm: Proper subclass and superclass check in ni_ifcondition_type()
- nanny: create workers and assign config from create policy
- nanny: Clear config.node on delete policy
- nanny: disable down operation for now
- dhcp4: fix link type comparison during device up events
- fsm: Move ni_ifup_pull_in_children to FSM
- client, nanny: Add policies first, enable successful devices
- lib: added netdev_ref_resolve utility, improved related

-------------------------------------------------------------------
Fri Jul  4 12:22:17 UTC 2014 - mt@suse.de

- version 0.5.32
- client: fixed hierarchy building to consider ifup/ifdown separately,
  improved verbosity debug and error messages (bnc#883203,bnc#884012)
- fsm: Do not fail completely on broken configuration (bnc#883203)
- fsm: wait for existing configuration workers (bnc#876855, bnc#880515)
- ifstatus: fixed to report status of requested interfaces only,
  moved device-ready flag to ifflags to be visible in xml status.
- ifreload: correctly set ipv4 and ipv6 enable flags disabled before.
- service: replaced incorrect network-online.target wants dependency
  with a WantedBy network-online.target dependency (bnc#883565)
- dhcp4,dhcp6: create storedir at tester start (bnc#885005)
- routes: apply ipv6 routes without device (bnc#882425)
- routes: fix to apply routes to device (bnc#883838)

-------------------------------------------------------------------
Fri Jun 27 11:02:57 UTC 2014 - mt@suse.de

- version 0.5.31
- fsm: maintain shared_users in refresh lowerdev (bnc#883976)

-------------------------------------------------------------------
Thu Jun 26 21:21:33 UTC 2014 - mt@suse.de

- version 0.5.30
- ifdown: rebuild hierarchy from lower and masterdev to stop
  requested interfaces in their correct order (bnc#883976)
- config: added <use-nanny>true</use-nanny> switch, which
  allows to test using nanny -- default is false.
- client: log exec commands and exit codes as debug
- client: initial merge of nanny ifup and ifdown
- nanny: initial merge of nanny fork changes
- rpm: removed obsolete pkgconfig(systemd), use unitdir
- library: fixed versioning of internal wicked lib

-------------------------------------------------------------------
Wed Jun 25 16:09:25 UTC 2014 - mt@suse.de

- version 0.5.29
- dhcp4: recover lease, correctly build requests (bnc#881475)
- ipv4: fix duplicate address detection (bnc#881475)
- service: added network-online.target to wants (bnc#883565)
- ibft: fixed to generate proper static address node, no
  static config with dhcp origin and to verify mac in ibft
  nic selection as it may be for offload device (bnc#883712)
- client: if needed refresh worker in addressAcquired callback
- client: wicked xpath subcommand argument check 
- doc: README and manual page updates (bnc#874609,bnc#880262)
- client: require directory in --ifconfig compat (bnc#881544)
- dhcp: show progress notifications (bnc#874609)

-------------------------------------------------------------------
Tue Jun  3 11:18:29 UTC 2014 - mt@suse.de

- version 0.5.28
- client: avoid FSM refreshes and unsolicited state updates causing
  to exit at assert, drop config origin and UUID on ifdown causing
  ifreload to do nothing (bnc#876848,bnc#880664).

-------------------------------------------------------------------
Wed May 28 19:09:54 UTC 2014 - mt@suse.de

- version 0.5.27
- server: do not apply multiple equal priority (merics) routes
  to the same destination (bnc#879842)
- compat: pass DHCLIENT_ROUTE_PRIORITY suse ifcfg variable to
  the backend allowing to set custom mertics on dhcp4 routes
  (bnc#879842)
- dhcp4: set protocol dhcp hint to all routes, strip domain
  when sending a hostname option to not break ddns updates
- hostname: reload syslog after change (bnc#874161)
- dbus: do not close shared connections (bnc#880124)
- ipv4: new default to send gratuitous arp
  Consider new suse ifcfg variable default SEND_GRATUITOUS_ARP=auto
  for arp-notify, enabling to send gratuitous arp by default, when
  duplicate IPv4 check is enabled via arp-verify/CHECK_DUPLICATE_IP
  and the check were successful (bnc#879911,fate#314399).

-------------------------------------------------------------------
Thu May 22 09:05:15 UTC 2014 - mt@suse.de

- version 0.5.26
- rpm: rpm: drop useless ghost dirs in spec (bnc#873857)
- client: do not try to fire nanny in ifdown, it is not hired yet
  We do not install nanny policies by default in ifup, so it is
  not needed to try to delete them in ifdown. There is currently
  no nanny started in inst-sys and the attempt is causing ifdown
  to run into timeouts (bnc#876848,bnc#879127).
- client: wait for optional leases, just don't fail
  When waiting for a group-optional lease pair (dhcp4 or dhcp6)
  and one arrives, wait for the second one until timeout and
  recheck the results then (bnc#876848,bnc#879127).
- dhcp6: fix reset and allocate message buffer in build to use
  clean buffer in release messages sometimes having crap behind.

-------------------------------------------------------------------
Mon May 19 15:42:43 UTC 2014 - mt@suse.de

- version 0.5.25
- server: no unrequested device-ready events (bnc#871135)
  This bug caused e.g. bridges not going up from device-exists
  even they already were in device-ready state before.
- client: do not mix shared with exclusive references (bnc#877776)
- ifconfig: do not fail on delete for vanished devices
- nanny: drop policies on ifdown, turn some errors to debug
- sysconfig: add WICKED_DEBUG and WICKED_LOG_LEVEL variables
  to /etc/sysconfig/network/config.
- man: added ifcfg-{dummy,macvlan,macvtap,tunnel},ifroute,routes
  ifsysctl and updated already existing manual pages.

-------------------------------------------------------------------
Wed May 14 11:01:39 UTC 2014 - mt@suse.de

- version 0.5.24
- rpm: use _rundir rpm macro if defined (bnc#873857)

-------------------------------------------------------------------
Wed May 14 10:39:02 UTC 2014 - mt@suse.de

- version 0.5.23
- fsm: added device-ready wait processing syncing at udev network
  device rename events (bnc#871135)
- ifup: no timeout report on group-optional leases (bnc#875154)
- ifstatus: no failure report if peer lease is up (bnc#875154)
- tunnels: discover gre,sit,ipip tunnels (read-only for now)
- client/nanny: utilities to convert ifconfigs into policy
- client: compare fix to consider configs using ifindex [ibft]

-------------------------------------------------------------------
Thu May  8 15:30:30 UTC 2014 - mt@suse.de

- version 0.5.22
- status: show only available leases and inclusive their uuid
- ifup, ifstatus: cond. accept STARTMODE off and manual
- ifstatus: fixed address indenting in verbose mode
- wireless: add missing wpa_supplicant intermediate states.
- wireless: clear secrets as soon as they are used
- dhcp4+dhcp6: apply config uuid to lease and offer early
- dhcp4: accept packets without udp checksum (bnc#873267)
- do not close stderr in daemon() when used in log-target
- client: do not report transient errors by default
  (partial bnc#875154 fix)

-------------------------------------------------------------------
Sun Apr 27 11:39:36 UTC 2014 - mt@suse.de

- version 0.5.21
- dhcp6: fix to allow supported devices (bnc#874561)
- dhcp,autoip: log unsupported devices debug1 level only

-------------------------------------------------------------------
Thu Apr 17 11:47:09 UTC 2014 - pwieczorkiewicz@suse.com

- version 0.5.20
- autoip4,dhcp4,dhcp6: fixed to create instance for supported
  devices only to save memory and avoid allocation complains due to
  packet capturing init failure
- lldp: fix infinite loops in ni_lldp_agent_update,
  disable built-in support (rejected fate#313671, bnc#873299)
- dhcp4: do not send hostname to server in discover (bnc#873267)
- rpm: explicit piddir,statedir,storedir in spec
- generate ChangeLog file from git while make dist

-------------------------------------------------------------------
Mon Apr 14 17:28:11 UTC 2014 - mt@suse.de

- version 0.5.19
- server/nanny: do not fail on missed dbus objects or object
  creation errors due to already deleted interfaces in the
  kernel while processing the event (bnc#867806,bnc#871388)
- netlink: verify if device still exists on newlink events
- nanny: fixed endless loop on policies without name and user
  control default, added device mach with identify capabilities

-------------------------------------------------------------------
Fri Mar 28 18:45:10 UTC 2014 - mt@suse.de

- version 0.5.18
- dhcp4: enabled on infiniband / IPoIB links
- capture: fixed to wrap link-layer packet sockets as the default
  address length in sockaddr_ll is not enough for infiniband.
- dhcp6: enabled on infiniband / IPoIB links

-------------------------------------------------------------------
Fri Mar 28 12:57:50 UTC 2014 - mt@suse.de

- version 0.5.17
- dhcp4: fixed posix-tz-dbname code and added to parse
- dhcp4: renew lease via unicast (bnc#866993)
- macvtap: initial support (fate#315131)
- ifstatus: do not consider client-state in ifstatus
- xml: fixed functions retrieving numerical attr values
- config: generate v5 UUIDs (SHA1) from xml config content

-------------------------------------------------------------------
Mon Mar 24 11:28:05 UTC 2014 - mt@suse.de

- version 0.5.16
- ipv6: catch ipv6.disable=1 kernel command line (bnc#869334)
- client: read and apply sysctl/ifsysctl files to consider
  ipv4/ipv6 forwarding, enable (disable_ipv6), ipv6 autoconf
  and privacy (use_tempaddr) sysctl options (bnc#869334)
- client: do not complain about missed /etc/HOSTNAME
- dhcp4: fixed decline message and processing (bnc#869150)
- dhcp4: check if lease exists while processing arp (bnc#869150)
- removed obsolete drop default route patch (bnc#868187)
  [- 0001-addrconf-drop-default-route-if-disabled-bnc-868187.patch]

-------------------------------------------------------------------
Mon Mar 17 10:32:03 UTC 2014 - mt@suse.de

- addrconf: drop default route if disabled (bnc#868187)
  Honor a (per-interface) DHCLIENT_SET_DEFAULT_ROUTE=no in
  suse ifcfg files and remove from lease before update runs.
  [+ 0001-addrconf-drop-default-route-if-disabled-bnc-868187.patch]

-------------------------------------------------------------------
Fri Mar 14 13:48:00 UTC 2014 - mt@suse.de

- version 0.5.15
- netlink: fixed masterdev reference name resolving bug
- bridge: lowered a questionable warning to debug
- added dummy interface support inclusive suse compat
- added tun/tap interface support inclusive suse compat
- netlink: fixed address parsing causing an abort on assert
- arp: verify ipv4 addresses by default (fate#314399)
- Enabled arp duplicate check for static ipv4 addresses as
  default (RFC 5227) and send arp notify when requested in
  suse ifcfg variables CHECK_DUPLICATE_IP(default yes) and
  SEND_GRATUITOUS_ARP(default no).
- ipv6: corrected to apply inverted ipv6.enable flag
- utils: fixed array remove typo and socket array activate
- utils: use proper index in ni_string_array_remove
- utils: properly adjust array in remove actions
- socket: use proper array in socket array activate

-------------------------------------------------------------------
Thu Mar  6 17:15:42 UTC 2014 - mt@suse.de

- rpm: added sysconfig-netconfig require to wicked (bnc#867078)
- service: use explicit before/after ordering in all service
  files (bnc#866732)

-------------------------------------------------------------------
Wed Mar  5 14:52:04 UTC 2014 - mt@suse.de

- bridge: fixed to set port link up (bnc#866860), also if they're
  already part of the bridge (bnc#862530 regression).
- dhcp: bring link up if not yet up and wait until it is ready in
  --test mode (used in network-autoconfig and dracut) instead to
  complain and exit because link is not ready yet (bnc#866617).

-------------------------------------------------------------------
Tue Mar  4 16:10:10 UTC 2014 - mt@suse.de

- state: fixed a state-dir creation race condition (bnc#866757)

-------------------------------------------------------------------
Fri Feb 28 13:28:35 UTC 2014 - mt@suse.de

- version 0.5.14
- util: fix ni_uuid_parse() and support 8-4-4-4-12 format only

-------------------------------------------------------------------
Thu Feb 27 22:03:51 UTC 2014 - mt@suse.de

- version 0.5.13
- bridge: do not require link-up on ports (bnc#862530)
- bonding: try to enslave into bond using netlink
- extensions: disabled writing of wickedd.log (debug) file
- addrconf: avoid unwanted updates, update flag fixes (bnc#865325)
- compat: blacklist all and default interface names
- leaseinfo: fixed typo in BOOTSERVERNAME variable
- compat: read all suse ifcfg files and init timeout
- compat: allow backends return complete config
- client: exclude STARTMODE='manual' interfaces in ifup all
  and ignore interfaces with STARTMODE='off' (bnc#864444)
- temporarily disable modem init from system
- disable wicked-devel subpackage to avoid wrong expectations
- nanny: do not update <client-into> and client-state> by default

-------------------------------------------------------------------
Fri Feb 21 10:17:42 UTC 2014 - mt@sue.de

- version 0.5.12
- wicked-devel: require libnl3-devel unconditionally

-------------------------------------------------------------------
Fri Feb 21 09:47:51 UTC 2014 - mt@suse.de

- version 0.5.11
- wicked-devel: require libnl3-devel used for build in spec

-------------------------------------------------------------------
Fri Feb 21 09:28:13 UTC 2014 - mt@suse.de

- version 0.5.10
- service: fix rpmlink suse-missing-rclink warnings
- compat: no systemd check via mountpoint in ifup (bnc#864696)

-------------------------------------------------------------------
Thu Feb 20 23:56:41 UTC 2014 - mt@suse.de

- version 0.5.9
- dhcp4: fixed to commit and inform wicked when a lease is
  released lease - this may have cause ifdown errors.
- client: workaround to consider wait-for-interfaces
  Get the WAIT_FOR_INTERFACES variable from environment, which is
  sourced in the service file to not timeout too early and also
  allow the users to increase it (see bnc#863371, bnc#862530).
- addconf: update allow static lease to update resolver
  This is required for iBFT leases and solves bnc#864131.
- iflist: check validity before extracting nla payload (bnc#863371)
- Update unquote to handle invalid sysconfig variables properly
  (bnc#864635)
- dhcp: added lease-xml output to dhcp --test mode and option 
  to request lease in dry-run mode (get lease and exit)
- client: turn "No valid config files found" into a debug msg
- infiniband: start after rdma service not openibd (sles-11)
- compat: fixed scripts/ifup -o debug handling
- daemons: disabled state.xml saving by default (bnc#862335)
- client: check for config priorities at reading stage
- client: add --raw parameter to the convert option
- wickedd: add sock->release_user_data and use in in process.c,
  clear temp-state files in ni_dbus_xml_deserialize_arguments.

-------------------------------------------------------------------
Thu Feb 13 22:21:02 UTC 2014 - mt@suse.de

- version 0.5.8
- updater: reverse resolve ip address if dhcp server does not
  provide a hostname (bnc#861476).
- debug: init debug and log level from environment using DEBUG,
  WICKED_DEBUG=<mask> and WICKED_LOG_LEVEL=<level> variables.
- dhcp4: check link before start, confirm lease on link change
  and do not discard lease if host does not match
- dhcp4: modprobe af_packet, omit arp validation when address
  already set on link.
- dhcp6: start when link + link-address ready, not network up
- dhcp: provide addrconf lease and leaseinfo details
- leaseinfo: consistently use prefixlen in ROUTES
- wireless: do not remove link/network up flags (bnc#863371)
- libwicked: libtool -version-info making package and library 
  versions independent.
- cleaned up unused schema files and extensions scripts
- lldp: do not log error when lldp is not supported (bnc#862790)
- ibft: fixed reading of the origin field
- iftypes: show s390 ctcm and iucv (slip) devices, not unknown

-------------------------------------------------------------------
Wed Feb  5 21:34:55 UTC 2014 - mt@suse.com

- version 0.5.7
- dhcp: request and set hostname and other options (bnc#861476),
- dhcp: accept dns-domain name option containing a domain list
  as compatibility abuse of this option and log it (bnc#862130)
- ibft: always modprobe iscsi_ibft when not yet loaded, added
  list-only mode and workaround missed readlink utility.
- dbus: Fix crashes when dbus instance not running
- leaseinfo: fix accidental closure of file descriptor argument
- client: improve initialization of client-state structure
- compat: apply ethtool and lladdr options from ifcfg variable
- set link-address (mac) for ethernet,vlan,macvlan devices
- do not set mtu or link-address when device is up as this
  tends to fail or break upper [vlan, ...] devices
- limit mtu of upper (vlan) devices to the mtu of lower (eth)
- addrconf: initial lease writing/parsing helpers / disarmed
- Disable modem support for now, new ModemManage API (bnc#859888)
- dhcp: fixed byteswap in ipudp_checksum and checksum_partial
- leaseinfo: include prefixlen in IPADDR same as in ifcfg files

-------------------------------------------------------------------
Thu Jan 23 15:57:48 UTC 2014 - mt@suse.com

- version 0.5.6
- fixed to free details in compat netdev and lease destroy.
- systemd: removed requisite=wickedd from wicked.service
  This dependency triggered an automatic wicked.service (network)
  restart, when the wickedd.service is restarted (bnc#859801).
- client: enable compat suse only, install ifcfg-lo
- client: initial ifcfg support for macvlan, fixed flags
  and lower-device dependencies in the schema (fate#315131)
- client: Changing ifcheck to be more robust

-------------------------------------------------------------------
Fri Jan 17 22:20:36 UTC 2014 - mt@suse.com

- version 0.5.5
- systemd: added Restart=on-abort to wickedd* (fate#315133)
- client: implemented ifreload and adopted services (fate#309018)
- client: use fsm to consider config in ifstatus, exit code rework
  and refactoring to implement check utilities for ifstatus+reload
- client: updated copyright and license statements

-------------------------------------------------------------------
Fri Jan 10 15:28:38 UTC 2014 - mt@suse.com

- Added rpm obsoletes sysconfig-network to wicked-service.

-------------------------------------------------------------------
Thu Jan  9 13:58:06 UTC 2014 - mt@suse.com

- version 0.5.4
- spec: require wicked-service package in wicked
  Fixed spec file to require the wicked-service package
  in wicked package under systemd. The wicked-service
  package provides systemd service files as well as the
  ifup compatibility scripts (bnc#856591,fate#316768).
- Documentation: man pages update, provide also ifcfg*
  and ifup,ifdown,ifstatus man pages (bnc#855135).
- systemd services: added --systemd parameters which
  enable systemd specific behaviour tweaks.
- initial wicked ifstatus command, ifstatus and ifprobe
  compat scripts used and in the network init-script
  on sysvinit systems (only, not under systemd).
- cleanup to use LSB codes in client and all daemons
- client: Add --delete and --no-delete options
- nanny: enable wickedd-nanny service by default
- Refactored to use same link.lowerdev name/index
  reference in vlan,macvlan,infiniband and show
  master device interface property in show-xml.
- infiniband schema: changed to use <infiniband:child>
  for infiniband child interfaces in native configs.
- fixed newlink functions to not free netdev on discard

-------------------------------------------------------------------
Fri Dec  6 14:22:09 UTC 2013 - mt@suse.com

- version 0.5.3
- cleaned up to not install unused wicked@.service example
- wickedd: added shutdownDevice method to ifdown transition from
  up to exists, used in bond/bridge to release slaves/ports.
- cleaned up internal iftype vs. arptype mappings and handling
- client: ifdown deletes the devices created by ifup
- configure: added rtnetlink,dcbnl,if_link checks
- macvlan: initial support, no ifcfg yet (fate#315131)
- wireless: do not scan and bind supplicant by default,
  corrected the schema to use proper auth-methods type
- socket: handle hangup after input, but before output
- added refcounting for ni_dbus_watch_data_t objects
- bonding: fixed bonding slave duplicate checks
- client: add client-state including a persistent mode
  to skip ifdown for important interfaces by default
- client: ifup --persistent and ifdown --force options
- several lldp fixes, mostly for parsing / formatting
- logging: added timestamp option to stderr --log-target
- extensions/updater: get and set NIS settings from lease
- extensions: replace resolver with new generic updater
  using simple netconfig key-value leaseinfo dump files
- dhcp4: initial --test <ifname> implementation (fate#316111)
- dhcp6: initial --test <ifname> implementation (fate#316111)
- dhcp6: fixed to accept low preference server offers
- dhcp4: set fsm state before building the message
- dhcp4: don't use offered address in initial request
- netlink: diverse error/return code handling fixes
- netlink: switched from libnl1 to libnl3
- moved TODO file content into individual github issues

-------------------------------------------------------------------
Wed Oct  2 06:21:31 UTC 2013 - mt@suse.com

- version 0.5.2
- added activation comment to the spec file (bnc#843526)
- fixed to not fail on config dirs without any config file

-------------------------------------------------------------------
Fri Sep 27 15:30:33 UTC 2013 - mt@suse.com

- version 0.5.1
- rpmlintrc: removed obsolete content (bnc#783932#c18)
- added extension to update hostname from [dhcp] lease
- refactored config read and added wicked show-config
- corrected & documented --log-target destination parsing
- fixed signed char issues in xml_escape_entities
- fail when the global --config path gets rejected

-------------------------------------------------------------------
Wed Sep 18 12:12:10 UTC 2013 - mt@suse.com

- Applied obs adjustments and copyright comment to spec file
- wicked ifdown: enable action waiting before calling methods
- wicked show: create client object and handle ifname argument
- wicked ifup: parse ifcfg static addrconf even without IPADDR
- disabled unfinished code to avoid errors / warnings about

-------------------------------------------------------------------
Mon Sep 16 12:36:43 UTC 2013 - mt@suse.com

- Initial candidate package for openSUSE:Factory

openSUSE Build Service is sponsored by