File apache2-httpd.conf of Package apache2.21779

#
# /etc/apache2/httpd.conf 
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# http://en.opensuse.org/SDB:Apache_installation


# Overview of include files, chronologically:
#
# httpd.conf
#  | 
#  |-- uid.conf  . . . . . . . . . . . . . .  UserID/GroupID to run under
#  |-- server-tuning.conf  . . . . . . . . .  sizing of the server (how many processes to start, ...)
#  |-- loadmodule.conf . . . . . . . . . . .  [*] load these modules
#  |-- listen.conf . . . . . . . . . . . . .  IP adresses / ports to listen on
#  |-- mod_log_config.conf . . . . . . . . .  define logging formats
#  |-- global.conf . . . . . . . . . . . . .  [*] server-wide general settings
#  |-- mod_status.conf . . . . . . . . . . .  restrict access to mod_status (server monitoring)
#  |-- mod_info.conf . . . . . . . . . . . .  restrict access to mod_info
#  |-- mod_reqtimeout.conf . . . . . . . . .  set timeout and minimum data rate for receiving requests
#  |-- mod_cgid-timeout.conf . . . . . . . .  set CGIDScriptTimeout if mod_cgid is loaded/active
#  |-- mod_usertrack.conf  . . . . . . . . .  defaults for cookie-based user tracking
#  |-- mod_autoindex-defaults.conf . . . . .  defaults for displaying of server-generated directory listings
#  |-- mod_mime-defaults.conf  . . . . . . .  defaults for mod_mime configuration
#  |-- errors.conf . . . . . . . . . . . . .  customize error responses
#  |-- ssl-global.conf . . . . . . . . . . .  SSL conf that applies to default server _and all_ virtual hosts
#  |-- protocols.conf  . . . . . . . . . . .  Protocol settings that applies to default server _and all_ virtual hosts
#  |
#  |-- default-server.conf . . . . . . . . .  set up the default server that replies to non-virtual-host requests
#  |    |--mod_userdir.conf  . . . . . . . .  enable UserDir (if mod_userdir is loaded)
#  |    `--conf.d/apache2-manual?conf  . . .  add the docs ('?' = if installed)
#  |
#  `-- vhosts.d/ . . . . . . . . . . . . . .  for each virtual host, place one file here
#       `-- *.conf . . . . . . . . . . . . .     (*.conf is automatically included)
#
#
# Files marked [*] are NOT read when server is started via systemd service. When server
# is started via service, defaults from /etc/sysconfig/apache2 are taken into account.
#



#  Filesystem layout:
#
# /etc/apache2/
#  |-- charset.conv  . . . . . . . . . . . .  for mod_auth_ldap
#  |-- conf.d/
#  |   |-- apache2-manual.conf . . . . . . .  conf that comes with apache2-doc
#  |   |-- mod_php4.conf . . . . . . . . . .  (example) conf that comes with apache2-mod_php4
#  |   `-- ... . . . . . . . . . . . . . . .  other configuration added by packages
#  |-- default-server.conf
#  |-- errors.conf
#  |-- httpd.conf  . . . . . . . . . . . . .  top level configuration file
#  |-- listen.conf
#  |-- magic
#  |-- mime.types -> ../mime.types
#  |-- mod_autoindex-defaults.conf
#  |-- mod_info.conf
#  |-- mod_log_config.conf
#  |-- mod_mime-defaults.conf
#  |-- mod_perl-startup.pl
#  |-- mod_status.conf
#  |-- mod_userdir.conf
#  |-- mod_usertrack.conf
#  |-- server-tuning.conf
#  |-- ssl-global.conf
#  |-- protocols.conf
#  |-- ssl.crl/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Revocation Lists (CRL)
#  |-- ssl.crt/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificates
#  |-- ssl.csr/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Signing Requests
#  |-- ssl.key/  . . . . . . . . . . . . . .  PEM-encoded RSA Private Keys
#  |-- ssl.prm/  . . . . . . . . . . . . . .  public DSA Parameter Files
#  |-- global.conf
#  |-- loadmodule.conf
#  |-- uid.conf
#  `-- vhosts.d/ . . . . . . . . . . . . . .  put your virtual host configuration (*.conf) here
#      |-- vhost-ssl.template
#      `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from default value of APACHE_MODULES in /etc/sysconfig/apache2
<IfDefine !SYSCONFIG>
  Include /etc/apache2/loadmodule.conf
</IfDefine>

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from default values of global settings in /etc/sysconfig/apache2
<IfDefine !SYSCONFIG>
  Include /etc/apache2/global.conf
</IfDefine>

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# mod_reqtimeout protects the server from the so-called "slowloris"
# attack: The server is not swamped with requests in fast succession,
# but with slowly transmitted request headers and body, thereby filling up
# the request slots until the server runs out of them.
# mod_reqtimeout is lightweight and should deliver good results
# with the configured default values. You shouldn't notice it at all.
Include /etc/apache2/mod_reqtimeout.conf

# Fix for CVE-2014-0231 introduces new configuration parameter 
# CGIDScriptTimeout. This directive and its effect prevent request 
# workers to be eaten until starvation if cgi programs do not send 
# output back to the server within the timout set by CGIDScriptTimeout.
Include /etc/apache2/mod_cgid-timeout.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to 
# any virtual host
Include /etc/apache2/ssl-global.conf

# global (server-wide) protocol configuration, that is not specific
# to any virtual host
Include /etc/apache2/protocols.conf

# forbid access to the entire filesystem by default
<Directory />
    Options None
    AllowOverride None
    <IfModule !mod_access_compat.c>
        Require all denied
    </IfModule>
    <IfModule mod_access_compat.c>
        Order deny,allow
        Deny from all
    </IfModule>
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
    <IfModule !mod_access_compat.c>
        Require all denied
    </IfModule>
    <IfModule mod_access_compat.c>
        Order allow,deny
        Deny from all
    </IfModule>
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.4/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
IncludeOptional /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider 
#       adding it in your own file (/etc/apache2/httpd.conf.local)
#       putting its name into APACHE_CONF_INCLUDE_FILES in 
#       /etc/sysconfig/apache2 -- this will make system updates 
#       easier :) 
openSUSE Build Service is sponsored by