File 0148-Linux-headers-update.patch of Package qemu-testsuite
From: Cornelia Huck <cohuck@redhat.com>
Date: Tue, 9 Jun 2020 16:26:53 +0200
Subject: Linux headers: update
Include-If: %if 0%{?suse_version} == 1315
Git-commit: f76b348ec78fb7316bbcc981127ae8894cfcc609 (partial)
References: bsc#1179725
Update against Linux 5.8-rc1.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
---
linux-headers/linux/kvm.h | 18 ++-
linux-headers/linux/vfio.h | 322 +++++++++++++++++++++++++++++++++++++
2 files changed, 338 insertions(+), 2 deletions(-)
diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 9804495a46c51b83e024686c91b5..a28c3667370bd61757cc1e7e5ef9 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
* ACPI gsi notion of irq.
* For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
* For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
- * For ARM: See Documentation/virt/kvm/api.txt
+ * For ARM: See Documentation/virt/kvm/api.rst
*/
union {
__u32 irq;
@@ -188,10 +188,13 @@ struct kvm_s390_cmma_log {
struct kvm_hyperv_exit {
#define KVM_EXIT_HYPERV_SYNIC 1
#define KVM_EXIT_HYPERV_HCALL 2
+#define KVM_EXIT_HYPERV_SYNDBG 3
__u32 type;
+ __u32 pad1;
union {
struct {
__u32 msr;
+ __u32 pad2;
__u64 control;
__u64 evt_page;
__u64 msg_page;
@@ -201,6 +204,15 @@ struct kvm_hyperv_exit {
__u64 result;
__u64 params[2];
} hcall;
+ struct {
+ __u32 msr;
+ __u32 pad2;
+ __u64 control;
+ __u64 status;
+ __u64 send_page;
+ __u64 recv_page;
+ __u64 pending_page;
+ } syndbg;
} u;
};
@@ -1017,6 +1029,8 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_S390_VCPU_RESETS 179
#define KVM_CAP_S390_PROTECTED 180
#define KVM_CAP_PPC_SECURE_GUEST 181
+#define KVM_CAP_HALT_POLL 182
+#define KVM_CAP_ASYNC_PF_INT 183
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1107,7 +1121,7 @@ struct kvm_xen_hvm_config {
*
* KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
* the irqfd to operate in resampling mode for level triggered interrupt
- * emulation. See Documentation/virt/kvm/api.txt.
+ * emulation. See Documentation/virt/kvm/api.rst.
*/
#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index a41c45286511f083878c06b60d71..f09df262c4b52dfcef1d66ee0bdc 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -305,6 +305,7 @@ struct vfio_region_info_cap_type {
#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
#define VFIO_REGION_TYPE_GFX (1)
#define VFIO_REGION_TYPE_CCW (2)
+#define VFIO_REGION_TYPE_MIGRATION (3)
/* sub-types for VFIO_REGION_TYPE_PCI_* */
@@ -378,6 +379,235 @@ struct vfio_region_gfx_edid {
/* sub-types for VFIO_REGION_TYPE_CCW */
#define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
+#define VFIO_REGION_SUBTYPE_CCW_SCHIB (2)
+#define VFIO_REGION_SUBTYPE_CCW_CRW (3)
+
+/* sub-types for VFIO_REGION_TYPE_MIGRATION */
+#define VFIO_REGION_SUBTYPE_MIGRATION (1)
+
+/*
+ * The structure vfio_device_migration_info is placed at the 0th offset of
+ * the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related
+ * migration information. Field accesses from this structure are only supported
+ * at their native width and alignment. Otherwise, the result is undefined and
+ * vendor drivers should return an error.
+ *
+ * device_state: (read/write)
+ * - The user application writes to this field to inform the vendor driver
+ * about the device state to be transitioned to.
+ * - The vendor driver should take the necessary actions to change the
+ * device state. After successful transition to a given state, the
+ * vendor driver should return success on write(device_state, state)
+ * system call. If the device state transition fails, the vendor driver
+ * should return an appropriate -errno for the fault condition.
+ * - On the user application side, if the device state transition fails,
+ * that is, if write(device_state, state) returns an error, read
+ * device_state again to determine the current state of the device from
+ * the vendor driver.
+ * - The vendor driver should return previous state of the device unless
+ * the vendor driver has encountered an internal error, in which case
+ * the vendor driver may report the device_state VFIO_DEVICE_STATE_ERROR.
+ * - The user application must use the device reset ioctl to recover the
+ * device from VFIO_DEVICE_STATE_ERROR state. If the device is
+ * indicated to be in a valid device state by reading device_state, the
+ * user application may attempt to transition the device to any valid
+ * state reachable from the current state or terminate itself.
+ *
+ * device_state consists of 3 bits:
+ * - If bit 0 is set, it indicates the _RUNNING state. If bit 0 is clear,
+ * it indicates the _STOP state. When the device state is changed to
+ * _STOP, driver should stop the device before write() returns.
+ * - If bit 1 is set, it indicates the _SAVING state, which means that the
+ * driver should start gathering device state information that will be
+ * provided to the VFIO user application to save the device's state.
+ * - If bit 2 is set, it indicates the _RESUMING state, which means that
+ * the driver should prepare to resume the device. Data provided through
+ * the migration region should be used to resume the device.
+ * Bits 3 - 31 are reserved for future use. To preserve them, the user
+ * application should perform a read-modify-write operation on this
+ * field when modifying the specified bits.
+ *
+ * +------- _RESUMING
+ * |+------ _SAVING
+ * ||+----- _RUNNING
+ * |||
+ * 000b => Device Stopped, not saving or resuming
+ * 001b => Device running, which is the default state
+ * 010b => Stop the device & save the device state, stop-and-copy state
+ * 011b => Device running and save the device state, pre-copy state
+ * 100b => Device stopped and the device state is resuming
+ * 101b => Invalid state
+ * 110b => Error state
+ * 111b => Invalid state
+ *
+ * State transitions:
+ *
+ * _RESUMING _RUNNING Pre-copy Stop-and-copy _STOP
+ * (100b) (001b) (011b) (010b) (000b)
+ * 0. Running or default state
+ * |
+ *
+ * 1. Normal Shutdown (optional)
+ * |------------------------------------->|
+ *
+ * 2. Save the state or suspend
+ * |------------------------->|---------->|
+ *
+ * 3. Save the state during live migration
+ * |----------->|------------>|---------->|
+ *
+ * 4. Resuming
+ * |<---------|
+ *
+ * 5. Resumed
+ * |--------->|
+ *
+ * 0. Default state of VFIO device is _RUNNNG when the user application starts.
+ * 1. During normal shutdown of the user application, the user application may
+ * optionally change the VFIO device state from _RUNNING to _STOP. This
+ * transition is optional. The vendor driver must support this transition but
+ * must not require it.
+ * 2. When the user application saves state or suspends the application, the
+ * device state transitions from _RUNNING to stop-and-copy and then to _STOP.
+ * On state transition from _RUNNING to stop-and-copy, driver must stop the
+ * device, save the device state and send it to the application through the
+ * migration region. The sequence to be followed for such transition is given
+ * below.
+ * 3. In live migration of user application, the state transitions from _RUNNING
+ * to pre-copy, to stop-and-copy, and to _STOP.
+ * On state transition from _RUNNING to pre-copy, the driver should start
+ * gathering the device state while the application is still running and send
+ * the device state data to application through the migration region.
+ * On state transition from pre-copy to stop-and-copy, the driver must stop
+ * the device, save the device state and send it to the user application
+ * through the migration region.
+ * Vendor drivers must support the pre-copy state even for implementations
+ * where no data is provided to the user before the stop-and-copy state. The
+ * user must not be required to consume all migration data before the device
+ * transitions to a new state, including the stop-and-copy state.
+ * The sequence to be followed for above two transitions is given below.
+ * 4. To start the resuming phase, the device state should be transitioned from
+ * the _RUNNING to the _RESUMING state.
+ * In the _RESUMING state, the driver should use the device state data
+ * received through the migration region to resume the device.
+ * 5. After providing saved device data to the driver, the application should
+ * change the state from _RESUMING to _RUNNING.
+ *
+ * reserved:
+ * Reads on this field return zero and writes are ignored.
+ *
+ * pending_bytes: (read only)
+ * The number of pending bytes still to be migrated from the vendor driver.
+ *
+ * data_offset: (read only)
+ * The user application should read data_offset field from the migration
+ * region. The user application should read the device data from this
+ * offset within the migration region during the _SAVING state or write
+ * the device data during the _RESUMING state. See below for details of
+ * sequence to be followed.
+ *
+ * data_size: (read/write)
+ * The user application should read data_size to get the size in bytes of
+ * the data copied in the migration region during the _SAVING state and
+ * write the size in bytes of the data copied in the migration region
+ * during the _RESUMING state.
+ *
+ * The format of the migration region is as follows:
+ * ------------------------------------------------------------------
+ * |vfio_device_migration_info| data section |
+ * | | /////////////////////////////// |
+ * ------------------------------------------------------------------
+ * ^ ^
+ * offset 0-trapped part data_offset
+ *
+ * The structure vfio_device_migration_info is always followed by the data
+ * section in the region, so data_offset will always be nonzero. The offset
+ * from where the data is copied is decided by the kernel driver. The data
+ * section can be trapped, mmapped, or partitioned, depending on how the kernel
+ * driver defines the data section. The data section partition can be defined
+ * as mapped by the sparse mmap capability. If mmapped, data_offset must be
+ * page aligned, whereas initial section which contains the
+ * vfio_device_migration_info structure, might not end at the offset, which is
+ * page aligned. The user is not required to access through mmap regardless
+ * of the capabilities of the region mmap.
+ * The vendor driver should determine whether and how to partition the data
+ * section. The vendor driver should return data_offset accordingly.
+ *
+ * The sequence to be followed while in pre-copy state and stop-and-copy state
+ * is as follows:
+ * a. Read pending_bytes, indicating the start of a new iteration to get device
+ * data. Repeated read on pending_bytes at this stage should have no side
+ * effects.
+ * If pending_bytes == 0, the user application should not iterate to get data
+ * for that device.
+ * If pending_bytes > 0, perform the following steps.
+ * b. Read data_offset, indicating that the vendor driver should make data
+ * available through the data section. The vendor driver should return this
+ * read operation only after data is available from (region + data_offset)
+ * to (region + data_offset + data_size).
+ * c. Read data_size, which is the amount of data in bytes available through
+ * the migration region.
+ * Read on data_offset and data_size should return the offset and size of
+ * the current buffer if the user application reads data_offset and
+ * data_size more than once here.
+ * d. Read data_size bytes of data from (region + data_offset) from the
+ * migration region.
+ * e. Process the data.
+ * f. Read pending_bytes, which indicates that the data from the previous
+ * iteration has been read. If pending_bytes > 0, go to step b.
+ *
+ * The user application can transition from the _SAVING|_RUNNING
+ * (pre-copy state) to the _SAVING (stop-and-copy) state regardless of the
+ * number of pending bytes. The user application should iterate in _SAVING
+ * (stop-and-copy) until pending_bytes is 0.
+ *
+ * The sequence to be followed while _RESUMING device state is as follows:
+ * While data for this device is available, repeat the following steps:
+ * a. Read data_offset from where the user application should write data.
+ * b. Write migration data starting at the migration region + data_offset for
+ * the length determined by data_size from the migration source.
+ * c. Write data_size, which indicates to the vendor driver that data is
+ * written in the migration region. Vendor driver must return this write
+ * operations on consuming data. Vendor driver should apply the
+ * user-provided migration region data to the device resume state.
+ *
+ * If an error occurs during the above sequences, the vendor driver can return
+ * an error code for next read() or write() operation, which will terminate the
+ * loop. The user application should then take the next necessary action, for
+ * example, failing migration or terminating the user application.
+ *
+ * For the user application, data is opaque. The user application should write
+ * data in the same order as the data is received and the data should be of
+ * same transaction size at the source.
+ */
+
+struct vfio_device_migration_info {
+ __u32 device_state; /* VFIO device state */
+#define VFIO_DEVICE_STATE_STOP (0)
+#define VFIO_DEVICE_STATE_RUNNING (1 << 0)
+#define VFIO_DEVICE_STATE_SAVING (1 << 1)
+#define VFIO_DEVICE_STATE_RESUMING (1 << 2)
+#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | \
+ VFIO_DEVICE_STATE_SAVING | \
+ VFIO_DEVICE_STATE_RESUMING)
+
+#define VFIO_DEVICE_STATE_VALID(state) \
+ (state & VFIO_DEVICE_STATE_RESUMING ? \
+ (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1)
+
+#define VFIO_DEVICE_STATE_IS_ERROR(state) \
+ ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | \
+ VFIO_DEVICE_STATE_RESUMING))
+
+#define VFIO_DEVICE_STATE_SET_ERROR(state) \
+ ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | \
+ VFIO_DEVICE_STATE_RESUMING)
+
+ __u32 reserved;
+ __u64 pending_bytes;
+ __u64 data_offset;
+ __u64 data_size;
+};
/*
* The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
@@ -577,6 +807,7 @@ enum {
enum {
VFIO_CCW_IO_IRQ_INDEX,
+ VFIO_CCW_CRW_IRQ_INDEX,
VFIO_CCW_NUM_IRQS
};
@@ -785,6 +1016,29 @@ struct vfio_iommu_type1_info_cap_iova_range {
struct vfio_iova_range iova_ranges[];
};
+/*
+ * The migration capability allows to report supported features for migration.
+ *
+ * The structures below define version 1 of this capability.
+ *
+ * The existence of this capability indicates that IOMMU kernel driver supports
+ * dirty page logging.
+ *
+ * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
+ * page logging.
+ * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
+ * size in bytes that can be used by user applications when getting the dirty
+ * bitmap.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 1
+
+struct vfio_iommu_type1_info_cap_migration {
+ struct vfio_info_cap_header header;
+ __u32 flags;
+ __u64 pgsize_bitmap;
+ __u64 max_dirty_bitmap_size; /* in bytes */
+};
+
#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/**
@@ -805,6 +1059,12 @@ struct vfio_iommu_type1_dma_map {
#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+struct vfio_bitmap {
+ __u64 pgsize; /* page size for bitmap in bytes */
+ __u64 size; /* in bytes */
+ __u64 *data; /* one bit per page */
+};
+
/**
* VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
* struct vfio_dma_unmap)
@@ -814,12 +1074,23 @@ struct vfio_iommu_type1_dma_map {
* field. No guarantee is made to the user that arbitrary unmaps of iova
* or size different from those used in the original mapping call will
* succeed.
+ * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
+ * before unmapping IO virtual addresses. When this flag is set, the user must
+ * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
+ * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
+ * A bit in the bitmap represents one page, of user provided page size in
+ * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
+ * indicates that the page at that offset from iova is dirty. A Bitmap of the
+ * pages in the range of unmapped size is returned in the user-provided
+ * vfio_bitmap.data.
*/
struct vfio_iommu_type1_dma_unmap {
__u32 argsz;
__u32 flags;
+#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
+ __u8 data[];
};
#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
@@ -831,6 +1102,57 @@ struct vfio_iommu_type1_dma_unmap {
#define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15)
#define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16)
+/**
+ * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
+ * struct vfio_iommu_type1_dirty_bitmap)
+ * IOCTL is used for dirty pages logging.
+ * Caller should set flag depending on which operation to perform, details as
+ * below:
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
+ * the IOMMU driver to log pages that are dirtied or potentially dirtied by
+ * the device; designed to be used when a migration is in progress. Dirty pages
+ * are logged until logging is disabled by user application by calling the IOCTL
+ * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
+ * the IOMMU driver to stop logging dirtied pages.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
+ * returns the dirty pages bitmap for IOMMU container for a given IOVA range.
+ * The user must specify the IOVA range and the pgsize through the structure
+ * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
+ * supports getting a bitmap of the smallest supported pgsize only and can be
+ * modified in future to get a bitmap of any specified supported pgsize. The
+ * user must provide a zeroed memory area for the bitmap memory and specify its
+ * size in bitmap.size. One bit is used to represent one page consecutively
+ * starting from iova offset. The user should provide page size in bitmap.pgsize
+ * field. A bit set in the bitmap indicates that the page at that offset from
+ * iova is dirty. The caller must set argsz to a value including the size of
+ * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
+ * actual bitmap. If dirty pages logging is not enabled, an error will be
+ * returned.
+ *
+ * Only one of the flags _START, _STOP and _GET may be specified at a time.
+ *
+ */
+struct vfio_iommu_type1_dirty_bitmap {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START (1 << 0)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP (1 << 1)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP (1 << 2)
+ __u8 data[];
+};
+
+struct vfio_iommu_type1_dirty_bitmap_get {
+ __u64 iova; /* IO virtual address */
+ __u64 size; /* Size of iova range */
+ struct vfio_bitmap bitmap;
+};
+
+#define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17)
+
/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
/*
