File update_git.sh of Package qemu.18959
#!/bin/bash
set -e
# update_git.sh: script to manage package maintenance using a git-based
# workflow. Commands are as follows:
# git2pkg (update package spec file and patches from git)
# pkg2git (update git (frombundle branch) from the package "bundleofbundles")
# refresh (refresh spec file from spec file template and "bundlofbundles")
# ci (check-in to obs, avoiding some spec file formatting issues)
# initbundle (Update/Create bundle only)
#
# (default is git2pkg)
#==============================================================================
check_requirements() {
RC=0
if [[ ! -e ./config.sh ]]; then
echo "ERROR: Missing config.sh configuration script"
RC=1
fi
if [[ ! $(rpm -q git-core) ]]; then
echo "ERROR: Missing dependency: git-core"
RC=1
fi
if [[ ! $(rpm -q osc) ]]; then
echo "ERROR: Missing dependency: osc package"
RC=1
fi
if [[ ! $(rpm -q obs-service-format_spec_file) ]]; then
echo "ERROR: Missing dependency: obs-service-format_spec_file package"
RC=1
fi
ONE_GIG_IN_1K_BLOCKS=1048576
AVAIL=$(df --output=avail /dev/shm | tail -1)
if [[ $AVAIL -lt $ONE_GIG_IN_1K_BLOCKS ]]; then
echo "ERROR: Please provide at least 1GB available space in /dev/shm"
RC=1
fi
if [[ "$RC" = "1" ]]; then
echo "Script requires the above resources. Please resolve to use this workflow"
exit
fi
}
#==============================================================================
usage() {
echo "Usage:"
echo "bash ./git_update.sh <command>"
echo "description: package maintenance using a git-based workflow. Commands:"
echo " git2pkg (update package spec file and patches from git. Is default)"
echo " pkg2git (update git (frombundle branch) from the package "bundleofbundles")"
echo " refresh (refresh spec file from spec file template and "bundlofbundles")"
echo " ci (check-in to build service, avoiding some spec file formatting issues)"
echo " initbundle (Update/Create bundle only)"
echo "(See script for details on doing 'LATEST' workflow)"
check_requirements
}
#==============================================================================
source ./config.sh
# If you're using LATEST, we assume you are an expert so no basic help provided
if [ "$GIT_UPSTREAM_COMMIT_ISH" != "LATEST" ]; then
if [ "$1" = "" ]; then
set -- git2pkg
else
case $1 in
help | -H | -h )
usage
exit
;;
initbundle | git2pkg | pkg2git | refresh | ci)
;;
* )
echo "Unknown command"
usage
exit
;;
esac
fi
fi
check_requirements
# As an aid to bypassing issues with our multibuild package and obs (see code
# below following the osc localrun of osc service localrun format_spec_file),
# provide an automated way to checkin without needing to type so much
if [ "$1" = "ci" ]; then
osc ci -f -n --noservice
exit
fi
# TODO: Here we should validate the variables that should be set in config.sh
REPO_COUNT=${#PATCH_PATH_MAP[@]}
if [[ "$REPO_COUNT" != "${#LOCAL_REPO_MAP[@]}" ]]; then
echo "PATCH_PATH_MAP and LOCAL_REPO_MAP array sizes do not agree - please fix"
exit
fi
check_requirements
# Zero based numbering, so we subtract 1 here:
if (( (REPO_COUNT * PATCH_RANGE) - 1 > 9999 )); then
if [[ "$OVERRIDE_FIVE_DIGIT_NUMBERING" = "1" ]]; then
FIVE_DIGIT_POTENTIAL=0
else
FIVE_DIGIT_POTENTIAL=1
fi
else
FIVE_DIGIT_POTENTIAL=0
fi
declare -A COMMIT_IDS_BY_SUBMODULE_PATH
# Get version info from the packages' tarball - decode and do some checks
BASE_RE="qemu-[[:digit:]]+(\.[[:digit:]]+){2,3}(-rc[[:digit:]])?"
EXTRA_RE="\+git\.[[:digit:]]+\.([[:xdigit:]]+)"
SUFFIX_RE="\.tar\.xz"
SIG_SUFFIX_RE="\.tar\.xz\.sig"
QEMU_TARBALL=($(find -maxdepth 1 -type f -regextype posix-extended -regex \
"\./$BASE_RE($EXTRA_RE)?$SUFFIX_RE" -printf "%f "))
QEMU_TARBALL_SIG=($(find -maxdepth 1 -type f -regextype posix-extended -regex \
"\./$BASE_RE($EXTRA_RE)?$SIG_SUFFIX_RE" -printf "%f "))
if [ ${#QEMU_TARBALL[@]} -gt 1 ]; then
echo "Multiple qemu tarballs detected. Please clean up"
exit
fi
if [ ${#QEMU_TARBALL_SIG[@]} -gt 1 ]; then
echo "Multiple qemu tarballs signature files detected. Please clean up"
exit
fi
OLD_SOURCE_VERSION_AND_EXTRA=$(echo $QEMU_TARBALL 2>/dev/null | head --bytes=-8\
| cut --bytes=6-)
VERSION_EXTRA=$(echo $OLD_SOURCE_VERSION_AND_EXTRA|awk -F+ '{if ($2) print \
"+"$2}')
if [ "$OLD_SOURCE_VERSION_AND_EXTRA" = "" ]; then
echo "ERROR: No tarball found!"
exit
fi
#==============================================================================
initbundle() {
# The bundle tarball has git bundles stored in a directory structure which mimics the
# submodule locations in the containing git repo. Also at that same dir level
# is a file named repo which contains the one line git repo url (with git:// or
# http(s) prefix). The bundles are named as follows:
# "{path/}{git_sha}.{bundle}", where {path/} isn't present for
# the top (qemu) bundle (ie it's for submodules).
find $GIT_DIR -mindepth 1 -delete
find $BUN_DIR -mindepth 1 -delete
if [[ -e ${LOCAL_REPO_MAP[$i]}/.git/shallow ]]; then
if [[ -e bundles.tar.xz ]]; then
tar --extract --xz -f bundles.tar.xz -C $BUN_DIR .
else
echo "ERROR: Superproject at ${LOCAL_REPO_MAP[$i]} is shallow (so we assume submodules aren't"
echo "recursively checked out), and there is not an existing bundle-of-bundles file, so we cannot"
echo "correctly initialize the packages bundle-of-bundles. Please fully initilize git superproject"
echo "before doing initbundle"
exit
fi
else
#TODO: Is there a better way to do this (we don't want the old bundle commit id's relied on HERE for LATEST)
if [[ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]]; then
rm bundles.tar.xz
fi
if [[ -e bundles.tar.xz ]]; then
tar --extract --xz -f bundles.tar.xz -C $BUN_DIR .
else
SUBMODULE_COMMIT_IDS=($(git -C ${LOCAL_REPO_MAP[0]} submodule status --recursive| cut -c 2- | awk '{print $1}'))
SUBMODULE_DIRS=($(git -C ${LOCAL_REPO_MAP[0]} submodule status --recursive| cut -c 2- |awk '{print $2}'))
SUBMODULE_COUNT=${#SUBMODULE_COMMIT_IDS[@]}
# TODO: do this with simply math - ie: use (( ... ))
if [[ "$REPO_COUNT" != "$(expr $SUBMODULE_COUNT + 1)" ]]; then
echo "ERROR: submodule count doesn't match what's in config.sh"
exit
fi
for (( i=0; i <$SUBMODULE_COUNT; i++ )); do
mkdir -p $BUN_DIR/${SUBMODULE_DIRS[$i]}
touch $BUN_DIR/${SUBMODULE_DIRS[$i]}/${SUBMODULE_COMMIT_IDS[$i]}.id
done
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
GIT_UPSTREAM_COMMIT=$NEW_COMMIT_ISH_FULL
else
# TODO: make this smarter, or change something - works for tag, but not normal commit?
GIT_UPSTREAM_COMMIT=$(git -C ${LOCAL_REPO_MAP[0]} show-ref -d $GIT_UPSTREAM_COMMIT_ISH|grep -F "^{}"|awk '{print $1}')
if [[ "$GIT_UPSTREAM_COMMIT" = "" ]]; then
GIT_UPSTREAM_COMMIT=$(git -C ${LOCAL_REPO_MAP[0]} show-ref -d $GIT_UPSTREAM_COMMIT_ISH||awk '{print $1}')
fi
if [[ "$GIT_UPSTREAM_COMMIT" = "" ]]; then
echo "ERROR: Failed to get commit id for $GIT_UPSTREAM_COMMIT_ISH"
exit
fi
fi
touch $BUN_DIR/$GIT_UPSTREAM_COMMIT.id
fi
fi
# Now go through all the submodule local repos that are present with a $GIT_BRANCH and create a bundle file for the patches found
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
SUBDIR=${PATCH_PATH_MAP[$i]}
GITREPO_COMMIT_ISH=($BUN_DIR/$SUBDIR*.id)
if [[ $GITREPO_COMMIT_ISH =~ .*(.{40})[.]id ]]; then
GITREPO_COMMIT_ISH=${BASH_REMATCH[1]}
echo "Using $GITREPO_COMMIT_ISH"
PATCH_RANGE_INDEX=$i
mkdir -p $GIT_DIR/$SUBDIR
git -C $GIT_DIR/$SUBDIR -c init.defaultBranch=$GIT_BRANCH init
git -C $GIT_DIR/$SUBDIR remote add origin file://$(readlink -f \
${LOCAL_REPO_MAP[$PATCH_RANGE_INDEX]})
if [[ $(git -C $GIT_DIR/$SUBDIR ls-remote --heads origin $GIT_BRANCH) ]]; then
git -C $GIT_DIR/$SUBDIR fetch --update-shallow origin $GIT_BRANCH
if [[ $(git -C $GIT_DIR/$SUBDIR rev-list $GITREPO_COMMIT_ISH..FETCH_HEAD) ]]; then
git -C $GIT_DIR/$SUBDIR bundle create $BUN_DIR/$SUBDIR$GITREPO_COMMIT_ISH.bundle $GITREPO_COMMIT_ISH..FETCH_HEAD
#TODO: post-process repo info to avoid un-needed diffs (eg git vs https)
git -C $(readlink -f ${LOCAL_REPO_MAP[$PATCH_RANGE_INDEX]}) remote get-url origin >$BUN_DIR/$SUBDIR/repo
fi
fi
fi
fi
done
# parameters chosen to allow bundle tarball exact reproducibility
tar --format gnu --xz \
--sort=name \
--numeric-owner \
--owner=0 \
--group=0 \
--mtime="@$(date -r qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz +%s)" \
--create \
-f bundles.tar.xz -C $BUN_DIR .
find $BUN_DIR -mindepth 1 -delete
find $GIT_DIR -mindepth 1 -delete
}
#==============================================================================
bundle2local() {
find $BUN_DIR -mindepth 1 -delete
tar xJf bundles.tar.xz -C $BUN_DIR
ID_FILES=$(find $BUN_DIR -printf "%P\n"|grep "id$")
for entry in ${ID_FILES[@]}; do
if [[ $entry =~ ^(.*)[/]*([a-f0-9]{40})[.]id$ ]]; then
SUBDIR=${BASH_REMATCH[1]}
GITREPO_COMMIT_ISH=${BASH_REMATCH[2]}
else
echo "ERROR! BAD BUNDLE CONTENT!"
exit
fi
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ "$SUBDIR" = "${PATCH_PATH_MAP[$i]}" ]]; then
PATCH_RANGE_INDEX=$i
break
fi
done
if [[ "$i" = "REPO_COUNT" ]]; then
echo "ERROR! BUNDLE SUBPROJECT $SUBDIR NOT MENTIONED IN config.sh! Fix!"
exit
fi
LOCAL_REPO=$(readlink -f ${LOCAL_REPO_MAP[$PATCH_RANGE_INDEX]})
if [ -e $LOCAL_REPO ]; then
git -C $LOCAL_REPO remote remove bundlerepo || true
if [ -e $BUN_DIR/$SUBDIR/$GITREPO_COMMIT_ISH.bundle ]; then
git -C $LOCAL_REPO remote add bundlerepo $BUN_DIR/$SUBDIR/$GITREPO_COMMIT_ISH.bundle
git -C $LOCAL_REPO fetch bundlerepo FETCH_HEAD
git -C $LOCAL_REPO branch -f frombundle FETCH_HEAD
git -C $LOCAL_REPO remote remove bundlerepo
else
# It's problematic to leave "stale" frombundle branches around
git -C $LOCAL_REPO branch -D frombundle || true
fi
else
if [ -e $BUN_DIR/$SUBDIR/$GITREPO_COMMIT_ISH.bundle ]; then
# TODO: We should be able to handle this case with some more coding, but for now...
echo "No local repo $LOCAL_REPO available to process git bundle!"
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
echo "The above is FATAL when doing LATEST processing - please fix"
exit
else
echo "Moving on..."
fi
fi
fi
done
find $BUN_DIR -mindepth 1 -delete
}
#==============================================================================
redo_tarball_and_rebase_patches() {
find $GIT_DIR -mindepth 1 -delete
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# CREATE TARBALL, USING FRESH REPO - WE COULD RELY MORE ON LOCAL IF WE WERE MORE CAREFUL
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# TODO: WHAT IS THIS NEXT LINE EVEN DOING FOR US?? (OK, it's initing a repo, what do we rely on there?)
# Here, the branch doesn't really matter, and we're not relying on a master branch - we're just making sure we are grabbing latest from upstream
# (while using a clone of "something close" as a way to quickly get most objects available as quickly as possible)
git clone -ls ${LOCAL_REPO_MAP[0]} -b $GIT_BRANCH --single-branch $GIT_DIR &>/dev/null
echo "Please wait..."
(cd $GIT_DIR && git remote add upstream \
$UPSTREAM_GIT_REPO &>/dev/null)
(cd $GIT_DIR && git remote update upstream &>/dev/null)
(cd $GIT_DIR && git reset --hard --recurse-submodules $NEW_COMMIT_ISH &>/dev/null)
# As an alternative, we could add a --recurse-submodules to the checkout instead here as well, right?
#UPSTREAM DOESNT DO THIS (time takes 17 minutes!):
# (cd $GIT_DIR && git submodule update --init --recursive &>/dev/null)
#INSTEAD THESE NEXT TWO LINES ARE WHAT IS DONE (these take 9 minutes and 3 minutes respectively):
(cd $GIT_DIR && git submodule update --init &>/dev/null)
(cd $GIT_DIR/roms/edk2 && git submodule update --init &>/dev/null)
VERSION_EXTRA=+git.$NOW_SECONDS.$NEW_COMMIT_ISH
if (cd ${LOCAL_REPO_MAP[0]} && git describe --exact-match $NEW_COMMIT_ISH \
&>/dev/null); then
if [ "$X" = "50" ]; then
echo "Ignoring non-standard tag"
else
# there is no VERSION_EXTRA
VERSION_EXTRA=
fi
fi
(cd $GIT_DIR/roms/seabios && git describe --tags --long --dirty > \
.version)
(cd $GIT_DIR/roms/skiboot && ./make_version.sh > .version)
echo "Almost there..."
tar --exclude=.git --transform "s,$GIT_DIR,qemu-$SOURCE_VERSION," \
-Pcf qemu-$SOURCE_VERSION$VERSION_EXTRA.tar $GIT_DIR
osc rm --force qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz &>/dev/null ||\
true
osc rm --force qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz.sig \
&>/dev/null || true
unset QEMU_TARBALL_SIG
xz -T 0 qemu-$SOURCE_VERSION$VERSION_EXTRA.tar
osc add qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# GET THE SUBMODULE COMMIT ID'S FROM THIS NEWLY MINTED QEMU CHECKOUT. WE'LL USE THAT WHEN WE REBASE OUR PATCHES
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !! We (perhaps temporarily) do MORE recursive submodules, since we are tracking ALL in these scripts, while upstream doesn't include all in tarball currently
# !!! THIS IS AT LEAST PARTLY REDUNDANT WITH THE update --init DONE ABOUT 30 LINES AGO
(cd $GIT_DIR && git submodule update --init --recursive &>/dev/null)
SUBMODULE_COMMIT_IDS=($(git -C $GIT_DIR submodule status --recursive|awk '{print $1}'))
SUBMODULE_DIRS=($(git -C $GIT_DIR submodule status --recursive|awk '{print $2}'))
SUBMODULE_COUNT=${#SUBMODULE_COMMIT_IDS[@]}
# TODO: do this with simply math - ie: use (( ... ))
if [[ "$REPO_COUNT" != "$(expr $SUBMODULE_COUNT + 1)" ]]; then
echo "ERROR: submodule count doesn't match the REPO_COUNT variable in config.sh file!"
exit
fi
# We have the submodule commits, but not in the PATCH ORDER which our config.sh has (see $PATCH_PATH_MAP)
for (( i=0; i <$REPO_COUNT-1; i++ )); do
COMMIT_IDS_BY_SUBMODULE_PATH[${SUBMODULE_DIRS[$i]}/]=${SUBMODULE_COMMIT_IDS[$i]}
done
COMMIT_IDS_BY_SUBMODULE_PATH[SUPERPROJECT]=$NEW_COMMIT_ISH_FULL
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# MOVE BUNDLE COMMITS OVER TO LOCAL frombundle BRANCH
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
bundle2local
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# REBASE $GIT_BRANCH's on latest COMMIT_IDS_FROM_SUBMODULE_PATH, after reseting branch to frombundle branch
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
if $(git -C ${LOCAL_REPO_MAP[$i]} branch | grep -F "frombundle" >/dev/null); then
SUBDIR=${PATCH_PATH_MAP[$i]}
git -C ${LOCAL_REPO_MAP[$i]} checkout -B $GIT_BRANCH frombundle
if [[ "$SUBDIR" = "" ]]; then
SUBDIR=SUPERPROJECT
fi
if ! $(git -C ${LOCAL_REPO_MAP[$i]} rebase ${COMMIT_IDS_BY_SUBMODULE_PATH[$SUBDIR]} >/dev/null); then
echo "Rebase of ${LOCAL_REPO_MAP[$i]}, branch $GIT_BRANCH needs manual help"
REBASE_FAILS="${LOCAL_REPO_MAP[$i]} $REBASE_FAILS"
fi
fi
fi
done
}
#==============================================================================
bundle2spec() {
rm -f checkpatch.log
rm -f checkthese
rm -rf checkdir
rm -rf savedir
find $GIT_DIR -mindepth 1 -delete
find $CMP_DIR -mindepth 1 -delete
find $BUN_DIR -mindepth 1 -delete
mkdir savedir
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# Handle case of casual user missing local repos.
# To support this, we must grok the spec file's
# list of patches for "reuse" in case we don't
# have local repo to use for extracting bundle
# contents. (here we assume the existing bundle
# would then still correspond to the patches
# listed in spec file for that repo)
# WARNING:
# The following groking expects the patch section
# to be as this script lays it out, not modified!
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
declare -a PATCHES_BY_SUBMODULE_PATH
IN_PATCH_SECTION=0
INDEX=$REPO_COUNT # "invalid" since zero based index of objects < one based count of objects
while IFS= read -r line; do
if [[ "$line" = "# Patches applied in base project:" ]]; then
IN_PATCH_SECTION=1
INDEX=0 # base project is 0 by definition
continue
fi
if [[ "$line" =~ ^..Patches.applied.in.(.*)/:$ ]]; then
REPO="${BASH_REMATCH[1]}/"
IN_PATCH_SECTION=1
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ "$REPO" = "${PATCH_PATH_MAP[$i]}" ]]; then
if [[ "$INDEX" != "$REPO_COUNT" ]]; then
PATCHES_BY_SUBMODULE_PATH[$INDEX]=$ACCUMULATED_PATCHES
unset ACCUMULATED_PATCHES
fi
INDEX=$i
break
fi
done
if [[ "$INDEX" = "$REPO_COUNT" ]]; then
echo "ERROR: Failure groking spec file for patches!"
exit
fi
continue
fi
if [[ "$IN_PATCH_SECTION" = "0" ]]; then
continue
fi
if [[ "$line" =~ ^$ ]]; then
PATCHES_BY_SUBMODULE_PATH[$INDEX]=$ACCUMULATED_PATCHES
break;
fi
if [[ "$line" =~ ^Patch[0-9]*:[\ ]*(.*)$ ]]; then
PATCH="${BASH_REMATCH[1]}"
#echo "Patch is $PATCH"
ACCUMULATED_PATCHES="$ACCUMULATED_PATCHES $PATCH"
continue
fi
echo "ERROR: Failure groking spec file for patches!"
exit
done < $PKG.spec
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# CONVERT BUNDLES INTO COMMITS AND FILL SPEC FILE
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tar xJf bundles.tar.xz -C $BUN_DIR
BUNDLE_FILES=$(find $BUN_DIR -printf "%P\n"|grep "bundle$")
for entry in ${BUNDLE_FILES[@]}; do
if [[ $entry =~ ^(.*)[/]*([a-f0-9]{40})[.]bundle$ ]]; then
SUBDIR=${BASH_REMATCH[1]}
GITREPO_COMMIT_ISH=${BASH_REMATCH[2]}
else
echo "ERROR! BAD BUNDLE CONTENT!"
exit
fi
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ "$SUBDIR" = "${PATCH_PATH_MAP[$i]}" ]]; then
PATCH_RANGE_INDEX=$i
break
fi
done
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$PATCH_RANGE_INDEX]}) ]]; then
mkdir -p $GIT_DIR/$SUBDIR
git -C $GIT_DIR/$SUBDIR -c init.defaultBranch=$GIT_BRANCH init
git -C $GIT_DIR/$SUBDIR remote add origin file://$(readlink -f \
${LOCAL_REPO_MAP[$PATCH_RANGE_INDEX]})
# This tag reference, was added to resolve $GITREPO_COMMIT_ISH, which is tag as commit-id
# Since origin may be shallow, we need to use the --update-shallow option
git -C $GIT_DIR/$SUBDIR fetch --update-shallow origin $GIT_BRANCH
git -C $GIT_DIR/$SUBDIR remote add bundle $BUN_DIR/$entry
git -C $GIT_DIR/$SUBDIR fetch bundle FETCH_HEAD
git -C $GIT_DIR/$SUBDIR format-patch -N --suffix= --no-renames -o $CMP_DIR -k --stat=72 \
--indent-heuristic --zero-commit --no-signature --full-index \
--src-prefix=a/$SUBDIR --dst-prefix=b/$SUBDIR \
--start-number=$(expr $PATCH_RANGE_INDEX \* $PATCH_RANGE) \
$GITREPO_COMMIT_ISH..FETCH_HEAD > /dev/null
PATCHES_BY_SUBMODULE_PATH[$PATCH_RANGE_INDEX]=""
else
# TODO: This doesn't handle numbered patches yet
COUNTER=$(expr $PATCH_RANGE_INDEX \* $PATCH_RANGE)
for patchname in ${PATCHES_BY_SUBMODULE_PATH[$PATCH_RANGE_INDEX]}; do
VALUE="0000"$COUNTER
if [ "$FIVE_DIGIT_POTENTIAL" = "1" ]; then
PREFIX=$(echo $VALUE|tail -c 6)
else
PREFIX=$(echo $VALUE|tail -c 5)
fi
cp $patchname savedir/$PREFIX-$patchname
let COUNTER+=1
done
fi
done
find $GIT_DIR -mindepth 1 -delete
find $BUN_DIR -mindepth 1 -delete
(
CHANGED_COUNT=0
UNCHANGED_COUNT=0
DELETED_COUNT=0
ADDED_COUNT=0
TOTAL_COUNT=0
shopt -s nullglob
for i in $CMP_DIR/*; do
# index line isn't consistent, so cut full index to normal line length
sed -E -i 's/(^index [a-f0-9]{28})[a-f0-9]{12}([.][.][a-f0-9]{28})[a-f0-9]{12}( [0-9]{6}$)/\1\2\3/' $i
BASENAME=$(basename $i)
if [ "$FIVE_DIGIT_POTENTIAL" = "1" ]; then
if [[ "$BASENAME" =~ ^[[:digit:]]{5}.* ]]; then
:
else
BASENAME=0"$BASENAME"
fi
fi
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
KEEP_COUNT=40+4+$FIVE_DIGIT_POTENTIAL+1
else
KEEP_COUNT=40
fi
tail -n +2 $i > $CMP_DIR/"${BASENAME:0:$KEEP_COUNT}".patch
rm $i
done
cp savedir/* $CMP_DIR/ || true
rm -rf savedir
# 4 digit xxxx-name used in the dest (remember that if 5 digit potential, then if not now 5 digit, add a 0 in front)
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
for i in [0-9][0-9][0-9][0-9]*-*.patch; do
osc rm --force "$i"
done
# make sure that w/out the numbered prefixes, the patchnames are all unique
mkdir checkdir
for i in $CMP_DIR/*; do
BASENAME=$(basename $i)
FINALNAME="${BASENAME:4+$FIVE_DIGIT_POTENTIAL+1:40+1+5}"
if [[ -e checkdir/"$FINALNAME" ]]; then
echo "ERROR! Patch name $FINALNAME is not unique! Please modify patch subject to achieve uniqueness"
exit 1
fi
cp $i checkdir/"$FINALNAME"
done
CHECK_DIR=checkdir
cp $CMP_DIR/*.patch .
else
CHECK_DIR=$CMP_DIR
fi
if [ "$FIVE_DIGIT_POTENTIAL" = "0" ]; then
CHECK_PREFIX="0"
NUMBERED_PATCH_RE="^[[:digit:]]{4}-.*[.]patch$"
else
CHECK_PREFIX="00"
NUMBERED_PATCH_RE="^[[:digit:]]{5}-.*[.]patch$"
fi
for i in $CHECK_DIR/*; do
BASENAME=$(basename $i)
if [ -e "$BASENAME" ]; then
if cmp -s "$i" "$BASENAME"; then
touch --reference="$BASENAME" "$i"
rm "$BASENAME"
let UNCHANGED_COUNT+=1
else
if [ "${BASENAME:0:1+$FIVE_DIGIT_POTENTIAL}" = "$CHECK_PREFIX" ]; then
echo "$BASENAME" >> checkthese
fi
rm $BASENAME
let CHANGED_COUNT+=1
let TOTAL_COUNT+=1
fi
else
echo " $BASENAME" >> qemu.changes.added
if [ "${BASENAME:0:1+$FIVE_DIGIT_POTENTIAL}" = "$CHECK_PREFIX" ]; then
echo "$BASENAME" >> checkthese
fi
let ADDED_COUNT+=1
let TOTAL_COUNT+=1
fi
done
for i in *.patch; do
if [[ "$i" =~ $NUMBERED_PATCH_RE ]]; then
if [[ "$NUMBERED_PATCHES" = "1" ]]; then
osc rm --force $i
echo " $i" >> qemu.changes.deleted
let DELETED_COUNT+=1
let TOTAL_COUNT+=1
fi
else
osc rm --force $i
echo " $i" >> qemu.changes.deleted
let DELETED_COUNT+=1
let TOTAL_COUNT+=1
fi
done
mv $CHECK_DIR/* .
if [ -e qemu.changes.added ]; then
xargs osc add < qemu.changes.added
fi
if [[ -e checkthese ]]; then
tar Jxf qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz \
qemu-$SOURCE_VERSION/scripts/checkpatch.pl --strip-components=2
for i in $(cat checkthese); do
./checkpatch.pl --no-tree --terse --no-summary --summary-file \
--patch $i >> checkpatch.log || true
done
fi
rm -f checkthese
rm -f checkpatch.pl
if [ -s checkpatch.log ]; then
echo "WARNING: Issues reported by qemu patch checker. Please handle" \
"ERROR items now:"
cat checkpatch.log
fi
rm -f checkpatch.log
if [ "$TOTAL_COUNT" != "0" -a "$VERSION_EXTRA" != "" -a "$OLD_COMMIT_ISH" =\
"$NEW_COMMIT_ISH" ]; then
# Only patches changed: update the version using current timestamp
VERSION_EXTRA=+git.$NOW_SECONDS.$OLD_COMMIT_ISH
osc mv qemu-$OLD_SOURCE_VERSION_AND_EXTRA.tar.xz \
qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
osc add qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz
fi
echo "QEMU version file: $QEMU_VERSION"
echo "QEMU source version: $SOURCE_VERSION"
echo "QEMU version extra: $VERSION_EXTRA"
# get rid of "rel-" prefix to the seabios version - keep any trailing git info, such as: "-44-g88ab0c1"
SEABIOS_VERSION=${SEABIOS_VERSION:-$(tar JxfO qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz \
qemu-$SOURCE_VERSION/roms/seabios/.version | cut -c5- | tr '-' '_')}
for package in $PKG; do
while IFS= read -r line; do
if [ "$line" = "PATCH_FILES" ]; then
# Here (and other places below) we try to get ONLY the numbered patches, but it's possible some ACTUAL patch name actually starts with multiple digits, but EXTREMELY unlikely
# TODO: do this better!
for i in [0-9][0-9][0-9][0-9]*-*.patch; do
NUM=${i%%-*}
DIV=$((10#$NUM/$PATCH_RANGE))
REM=$((10#$NUM%$PATCH_RANGE))
if [[ "$REM" = "0" ]]; then
if [[ "$DIV" = "0" ]]; then
echo "# Patches applied in base project:"
else
echo "# Patches applied in ${PATCH_PATH_MAP[$DIV]}:"
fi
fi
if [[ "$FIVE_DIGIT_POTENTIAL" != "0" ]]; then
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
PATCH_NUMBER=${i%%-*}
echo -e "Patch$NUM: ${i:${#PATCH_NUMBER}+1:40+1+5}"
else
echo -e "Patch$NUM: $i"
fi
else
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
PATCH_NUMBER=${i%%-*}
echo -e "Patch$NUM: ${i:${#PATCH_NUMBER}+1:40+1+5}"
else
echo -e "Patch$NUM: $i"
fi
fi
done
elif [ "$line" = "PATCH_EXEC" ]; then
unset PREV_S
for i in [0-9][0-9][0-9][0-9]*-*.patch; do
S=$(grep "^Include-If: " $i) || true
NUM=${i%%-*}
if [ "$PREV_S" != "" -a "$PREV_S" != "$S" ]; then
echo "%endif"
fi
if [ "$S" != "" -a "$S" != "$PREV_S" ]; then
echo "${S:12}"
fi
echo "%patch$NUM -p1"
PREV_S=$S
done
if [ "$PREV_S" != "" ]; then
echo "%endif"
fi
elif [ "$line" = "INSERT_VERSIONING" ]; then
echo "%define qemuver $QEMU_VERSION$VERSION_EXTRA"
echo "%define srcver $SOURCE_VERSION$VERSION_EXTRA"
# For SLE11, where seabios isn't in the qemu tarball:
if [[ "$SEABIOS_VERSION" != "" ]]; then
echo "%define sbver $SEABIOS_VERSION"
fi
elif [[ "$line" =~ ^Source: ]]; then
echo "$line"
if [ ${#QEMU_TARBALL_SIG[@]} -eq 1 ]; then
# We assume the signature file corresponds - just add .sig
echo "$line.sig"|sed 's/^Source: /Source99:/'
fi
else
echo "$line"
fi
done < $package.spec.in > $CMP_DIR/$package.spec
if cmp -s $package.spec $CMP_DIR/$package.spec; then
echo "$package.spec unchanged"
else
mv $CMP_DIR/$package.spec $package.spec
echo "$package.spec regenerated"
let PACKAGE_CHANGED_COUNT+=1
fi
if [ "$WRITE_LOG" = "1" ]; then
# Factory requires all deleted and added patches to be mentioned
if [ -e qemu.changes.deleted ]; then
echo "* Patches dropped:" >> $package.changes.proposed
cat qemu.changes.deleted >> $package.changes.proposed
fi
if [ -e qemu.changes.added ]; then
echo "* Patches added:" >> $package.changes.proposed
cat qemu.changes.added >> $package.changes.proposed
fi
if [ -e $package.changes.proposed ]; then
osc vc --file=$package.changes.proposed $package
rm -f $package.changes.proposed
fi
fi
done
if [[ "$NUMBERED_PATCHES" = "0" ]]; then
rm -f [0-9][0-9][0-9][0-9]*-*.patch
fi
if [ -e qemu.changes.deleted ]; then
rm -f qemu.changes.deleted
fi
if [ -e qemu.changes.added ]; then
rm -f qemu.changes.added
fi
echo "git patch summary"
echo " unchanged: $UNCHANGED_COUNT"
echo " changed: $CHANGED_COUNT"
echo " deleted: $DELETED_COUNT"
echo " added: $ADDED_COUNT"
)
find $CMP_DIR -mindepth 1 -delete
rm -rf checkdir
osc service localrun format_spec_file || true
# Repair what I feel is incorrect modification of the package name in the header.
# Be aware that when checking into build service you should use --noservice, since we've
# already run this and --noservice will prevent the modification from happening at checkin
# time.
sed -i 's/^# spec file for package '$PKG'%{name_suffix}$/# spec file for package '$PKG'/g' $PKG.spec
sed -i 's/^# spec file for package '$PKG'-linux-user$/# spec file for package '$PKG'/g' $PKG.spec
}
#==============================================================================
setup_common_vars() {
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
QEMU_VERSION=$(git -C ${LOCAL_REPO_MAP[0]} show upstream/master:VERSION)
MAJOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $1}')
MINOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $2}')
X=$(echo $QEMU_VERSION|awk -F. '{print $3}')
# 0 = release, 50 = development cycle, 90..99 equate to release candidates
if [ "$X" != "0" -a "$X" != "50" ]; then
if [ "$NEXT_RELEASE_IS_MAJOR" = "0" ]; then
SOURCE_VERSION=$MAJOR_VERSION.$[$MINOR_VERSION+1].0-rc$[X-90]
GIT_BRANCH=opensuse-$MAJOR_VERSION.$[$MINOR_VERSION+1]
else
SOURCE_VERSION=$[$MAJOR_VERSION+1].0.0-rc$[X-90]
GIT_BRANCH=opensuse-$[$MAJOR_VERSION+1].0
fi
else
SOURCE_VERSION=$MAJOR_VERSION.$MINOR_VERSION.$X
if [ "$X" = "0" ]; then
GIT_BRANCH=opensuse-$MAJOR_VERSION.$[$MINOR_VERSION]
else
if [ "$NEXT_RELEASE_IS_MAJOR" = "0" ]; then
GIT_BRANCH=opensuse-$MAJOR_VERSION.$[$MINOR_VERSION+1]
else
GIT_BRANCH=opensuse-$[MAJOR_VERSION+1].0
fi
fi
fi
else
SOURCE_VERSION=$OLD_SOURCE_VERSION_AND_EXTRA
QEMU_VERSION=$(tar JxfO qemu-$SOURCE_VERSION$VERSION_EXTRA.tar.xz qemu-$SOURCE_VERSION/VERSION)
if [ ! "$QEMU_VERSION" = "$OLD_SOURCE_VERSION_AND_EXTRA" ]; then
echo "Tarball name (which we decode) doesn't correspond to the VERSION file contained therein"
exit
fi
MAJOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $1}')
MINOR_VERSION=$(echo $QEMU_VERSION|awk -F. '{print $2}')
GIT_BRANCH=opensuse-$MAJOR_VERSION.$MINOR_VERSION
fi
}
#==============================================================================
clean_up_temp_dirs()
{
rm -rf $GIT_DIR
rm -rf $CMP_DIR
rm -rf $BUN_DIR
}
#==============================================================================
if [[ ! -e $(readlink -f ${LOCAL_REPO_MAP[0]}) ]]; then
echo "No local repo found at ${LOCAL_REPO_MAP[0]}"
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
echo "Using LATEST config.sh setting is an expert mode. Set up local repos accordingly"
exit
fi
read -p "Would you like me to set that up for you? (Y/N)" -n 1 -r
echo
if [[ $REPLY =~ ^[Yy]$ ]]; then
echo "Got an affirmative answer, proceeding..."
setup_common_vars
git -c init.defaultBranch=$GIT_BRANCH init ${LOCAL_REPO_MAP[0]}
git -C ${LOCAL_REPO_MAP[0]} remote add origin $PACKAGE_MAIN_GIT_REPO &>/dev/null
git -C ${LOCAL_REPO_MAP[0]} fetch origin +refs/tags/initial:refs/tags/initial --no-tags
git -C ${LOCAL_REPO_MAP[0]} reset --hard --recurse-submodules initial
#TODO: The next is not actually used - get rid of when we decide for sure it won't get used
GIT_UPSTREAM_COMMIT=$(git -C ${LOCAL_REPO_MAP[0]} ls-remote origin |grep -F "$GIT_UPSTREAM_COMMIT_ISH^{}"|awk '{print $1}')
# Here we've changed to use *COMMIT_ISH, not *_COMMIT - is that an issue?
git -C ${LOCAL_REPO_MAP[0]} fetch --depth=1 origin +refs/tags/$GIT_UPSTREAM_COMMIT_ISH:refs/tags/$GIT_UPSTREAM_COMMIT_ISH --no-tags
git -C ${LOCAL_REPO_MAP[0]} remote add upstream $UPSTREAM_GIT_REPO &>/dev/null
bundle2local
git -C ${LOCAL_REPO_MAP[0]} checkout -B $GIT_BRANCH frombundle
echo "We set up a shallow local repo of the package's git superproject at"
echo "${LOCAL_REPO_MAP[0]}, and initialized it from the bundle."
echo "(no options processed)"
echo "If you wish to make the repo complete for all qemu packaging work,"
echo "unshallow it first with git fetch --unshallow origin --all, then get"
echo "the submodules updated with git submodule update --init --recursive"
echo "Be aware that this downloads a LOT of data (that's why we didn't just"
echo "do that automatically. Then you may also fetch other branches from the"
echo "origin remote, and get the latest upstream patches from the upstream"
echo "remote. Refer to config.sh for submodule repos locations you can set"
echo "up to also work on patches for the superproject's submodules."
exit
else
echo "Script requires qemu superproject local git repo. Please provide in"
echo "order to use this script."
fi
exit
fi
# TODO: Perhaps useful: get the current state of the git superproject
# The following sends output to stdout which we don't want to see
#git -C ${LOCAL_REPO_MAP[0]} status --untracked-files=no --branch --porcelain=2 \
# | awk '{print "var"NR"="$3}'
# $var1 is the current commit
# $var2 is the current branch or 'detached', if not on a branch
# $var3 is the current upstream branch (if set), as in eg 'origin/opensuse-5.0'
# $var4 is not of use to us
if [ "$GIT_UPSTREAM_COMMIT_ISH" != "LATEST" ]; then
if [ ! "$GIT_UPSTREAM_COMMIT_ISH" = "v$OLD_SOURCE_VERSION_AND_EXTRA" ]; then
echo "Tarball name (which we decode) doesn't correspond to the \$GIT_UPSTREAM_COMMIT_ISH in config.sh"
exit
fi
setup_common_vars
fi
# TODO: What checks should be different between LATEST and non-LATEST?
echo "ALERT: Script using local git repos. Some operations may be time consuming..."
# TODO: Some of these checks are perhaps not necessary
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
if [[ -e ${LOCAL_REPO_MAP[$i]}/.git/shallow ]]; then
echo "${LOCAL_REPO_MAP[$i]} is shallow, skipping checks"
continue
fi
if [[ -d ${LOCAL_REPO_MAP[$i]}/.git/rebase-merge || \
-d ${LOCAL_REPO_MAP[$i]}/.git/rebase-apply ]]; then
echo "ERROR! Rebase appears to be in progress in ${LOCAL_REPO_MAP[$i]}. Please resolve"
exit
fi
# TODO: We've not even verified what branch we're on here - so this is a bit misguided!
if ! git -C ${LOCAL_REPO_MAP[$i]} submodule update --init --recursive &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git submodule update --init --recursive is successful)"
exit
fi
if [ "$(git -C ${LOCAL_REPO_MAP[$i]} status --porcelain)" ]; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git status --porcelain produces no output)"
exit
fi
# TODO: See about doing the following better (also see what needs to happen for LATEST)
if [ "$GIT_UPSTREAM_COMMIT_ISH" != "LATEST" ]; then
if $(git -C ${LOCAL_REPO_MAP[$i]} branch --remote | grep -F "origin/$GIT_BRANCH" >/dev/null); then
if ! $(git -C ${LOCAL_REPO_MAP[$i]} branch | grep -F "$GIT_BRANCH" >/dev/null); then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(cannot find branch $GIT_BRANCH, please create a tracking branch of remote origin/$GIT_BRANCH)"
exit
fi
if ! git -C ${LOCAL_REPO_MAP[$i]} checkout $GIT_BRANCH --recurse-submodules -f &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(cannot check out $GIT_BRANCH, incl. it's submodules)"
exit
fi
fi
fi
# This does additional setup now that we've possibly grabbed additional submodules
if ! git -C ${LOCAL_REPO_MAP[$i]} submodule update --init --recursive &> /dev/null; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(cannot init and update current branch submodules)"
exit
fi
if [ "$(git -C ${LOCAL_REPO_MAP[$i]} status --porcelain)" ]; then
echo "Please clean up state of local repo ${LOCAL_REPO_MAP[$i]} before using script"
echo "(ensure git status --porcelain produces no output)"
exit
fi
fi
done
# cleanup directories from any previous failed run:
rm -rf /dev/shm/qemu-???????-git-dir
rm -rf /dev/shm/qemu-???????-cmp-dir
rm -rf /dev/shm/qemu-???????-bun-dir
# Temporary directories used in this script
GIT_DIR=$(mktemp -d /dev/shm/qemu-XXXXXXX-git-dir)
CMP_DIR=$(mktemp -d /dev/shm/qemu-XXXXXXX-cmp-dir)
BUN_DIR=$(mktemp -d /dev/shm/qemu-XXXXXXX-bun-dir)
if [ "$GIT_UPSTREAM_COMMIT_ISH" = "LATEST" ]; then
if [ "$1" = "continue" ]; then
CONTINUE_AFTER_REBASE=1
else
if [ "$1" = "pause" ]; then
PAUSE_BEFORE_BUNDLE_CREATION=1
else
if [ "$1" ]; then
echo "ERROR: unrecognized option '$1'. Script in LATEST mode only recognizes 'pause' and 'continue' options"
clean_up_temp_dirs
exit
fi
fi
fi
for (( i=0; i <$REPO_COUNT; i++ )); do
if [[ -e $(readlink -f ${LOCAL_REPO_MAP[$i]}) ]]; then
git -C ${LOCAL_REPO_MAP[$i]} remote update upstream &> /dev/null
fi
done
NEW_COMMIT_ISH_FULL=$(cd ${LOCAL_REPO_MAP[0]} && git rev-parse upstream/master)
NEW_COMMIT_ISH=${NEW_COMMIT_ISH_FULL:0:8}
setup_common_vars
WRITE_LOG=0
echo "Processing LATEST upstream changes"
echo "(If SUCCESS is not printed upon completion, see ~/latest.log for issues)"
if [[ $QEMU_TARBALL =~ $BASE_RE$EXTRA_RE$SUFFIX_RE ]]; then
OLD_COMMIT_ISH=${BASH_REMATCH[3]}
else
#Assume release (or release candidate) tarball with equivalent tag:
OLD_COMMIT_ISH=$(cd ${LOCAL_REPO_MAP[0]} && git rev-list --abbrev-commit \
--abbrev=8 -1 v$OLD_SOURCE_VERSION_AND_EXTRA)
fi
if [ ${#QEMU_TARBALL_SIG[@]} -ne 0 ]; then
echo "INFO: Ignoring signature file: $QEMU_TARBALL_SIG"
QEMU_TARBALL_SIG=
fi
NOW_SECONDS=$(date +%s)
if [ "$OLD_COMMIT_ISH" != "$NEW_COMMIT_ISH" ]; then
if [ "$CONTINUE_AFTER_REBASE" = "1" ]; then
echo "continue after rebase selected but tarball is out of date. Continuing not possible."
echo "If desired, save your rebase work (eg, branch $GIT_BRANCH), because otherwise it will"
echo "be lost. Then run script again without the continue option"
clean_up_temp_dirs
exit
fi
redo_tarball_and_rebase_patches &> ~/latest.log # This includes a bundle2local
if [[ "$REBASE_FAILS" ]]; then
echo "ERROR! Rebase of the $GIT_BRANCH branch failed in the following local git repos:"
echo $REBASE_FAILS
echo "Manually resolve all these rebases, then finish the workflow by passing 'continue' to script"
if [[ "$PAUSE_BEFORE_BUNDLE_CREATION" = "1" ]]; then
echo "Feel free to also do the work now occasioned by the selected 'pause' option"
fi
clean_up_temp_dirs
exit
fi
CONTINUE_AFTER_REBASE=1
fi
if [[ "$PAUSE_BEFORE_BUNDLE_CREATION" = "1" ]]; then
echo "As requested, pausing before re-creating bundle of bundles for additional patch or specfile work"
echo "(using current 'ready to go' $GIT_BRANCH branch of local repos to produce patches.)"
echo "When changes are complete, finish the workflow by passing 'continue' to script"
clean_up_temp_dirs
exit
fi
if [ "$CONTINUE_AFTER_REBASE" = "1" ]; then
initbundle &>> ~/latest.log
fi
bundle2spec &>> ~/latest.log
echo "SUCCESS"
tail -9 ~/latest.log
else # not LATEST
NEW_COMMIT_ISH=
WRITE_LOG=1
case $1 in
initbundle )
echo "Updating/creating the bundle using the $GIT_BRANCH branch of the local repos."
echo "(If SUCCESS is not printed upon completion, see ~/initbundle.log for issues)"
initbundle &> ~/initbundle.log
echo "SUCCESS"
;;
git2pkg )
echo "Updating the package using the $GIT_BRANCH branch of the local repos."
echo "(If SUCCESS is not printed upon completion, see ~/git2pkg.log for issues)"
initbundle &> ~/git2pkg.log
bundle2spec &>> ~/git2pkg.log
echo "SUCCESS"
tail -9 ~/git2pkg.log
;;
pkg2git )
echo "Exporting the package's git bundles to the local repo's frombundle branches..."
echo "(If SUCCESS is not printed upon completion, see ~/pkg2git.log for issues)"
bundle2local &> ~/pkg2git.log
echo "SUCCESS"
echo "To modify package patches, use the frombundle branch as the basis for updating"
echo "the $GIT_BRANCH branch with the new patch queue."
echo "Then export the changes back to the package using update_git.sh git2pkg"
;;
refresh )
echo "Updating the spec file and patches from the spec file template and the bundle"
echo "of bundles (bundles.tar.xz)"
echo "(If SUCCESS is not printed upon completion, see ~/refresh.log for issues)"
bundle2spec &> ~/refresh.log
echo "SUCCESS"
tail -9 ~/refresh.log
;;
esac
fi
clean_up_temp_dirs
exit
