File s390-tools-sles15sp3-hsci-Add-new-tool-to-control-HiperSockets-Converged-.patch of Package s390-tools.28664
From ef090dda8333a778cb2d9e7f65ca8021e2ae9e67 Mon Sep 17 00:00:00 2001
From: Karsten Graul <kgraul@linux.ibm.com>
Date: Tue, 10 Nov 2020 12:07:03 +0100
Subject: [PATCH] hsci: Add new tool to control HiperSockets Converged
Interfaces
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
hsci is used to control and show HSCI (HiperSockets Converged Interfaces)
settings. A HiperSockets interface and an external network interface are
converged to an HSCI interface.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Hoeppner <hoeppner@linux.ibm.com>
---
Makefile | 2 +-
README.md | 3 +
hsci/Makefile | 16 ++
hsci/hsci | 441 ++++++++++++++++++++++++++++++++++++++++++++++++++
hsci/hsci.8 | 100 ++++++++++++
5 files changed, 561 insertions(+), 1 deletion(-)
create mode 100644 hsci/Makefile
create mode 100755 hsci/hsci
create mode 100644 hsci/hsci.8
diff --git a/Makefile b/Makefile
index cc277b8e..cfbbd950 100644
--- a/Makefile
+++ b/Makefile
@@ -9,7 +9,7 @@ TOOL_DIRS = zipl zdump fdasd dasdfmt dasdview tunedasd \
vmconvert vmcp man mon_tools dasdinfo vmur cpuplugd ipl_tools \
ziomon iucvterm hyptop cmsfs-fuse qethqoat zfcpdump zdsfs cpumf \
systemd hmcdrvfs cpacfstats zdev dump2tar zkey netboot etc zpcictl \
- genprotimg lsstp
+ genprotimg lsstp hsci
SUB_DIRS = $(LIB_DIRS) $(TOOL_DIRS)
diff --git a/README.md b/README.md
index aa2188a5..581353fd 100644
--- a/README.md
+++ b/README.md
@@ -249,6 +249,9 @@ Package contents
Management Foundation - Web Edition, and is used to manage keys in an
enterprise.
+ * hsci:
+ Manage HiperSockets Converged Interfaces (HSCI).
+
For more information refer to the following publications:
* "Device Drivers, Features, and Commands" chapter "Useful Linux commands"
diff --git a/hsci/Makefile b/hsci/Makefile
new file mode 100644
index 00000000..6f7474c5
--- /dev/null
+++ b/hsci/Makefile
@@ -0,0 +1,16 @@
+include ../common.mak
+
+all:
+
+install: hsci
+ $(SED) -e 's/%S390_TOOLS_VERSION%/$(S390_TOOLS_RELEASE)/' \
+ < hsci >$(DESTDIR)$(BINDIR)/hsci; \
+ chown $(OWNER).$(GROUP) $(DESTDIR)$(BINDIR)/hsci; \
+ chmod 755 $(DESTDIR)$(BINDIR)/hsci; \
+ $(INSTALL) -d -m 755 $(DESTDIR)$(BINDIR) $(DESTDIR)$(MANDIR)/man8
+ $(INSTALL) -g $(GROUP) -o $(OWNER) -m 644 hsci.8 \
+ $(DESTDIR)$(MANDIR)/man8
+
+clean:
+
+.PHONY: all install clean
diff --git a/hsci/hsci b/hsci/hsci
new file mode 100755
index 00000000..9a56aa0d
--- /dev/null
+++ b/hsci/hsci
@@ -0,0 +1,441 @@
+#!/bin/bash
+#
+# hsci - Tool to manage HiperSockets Converged Interfaces (HSCI)
+#
+# Copyright IBM Corp. 2020
+#
+# s390-tools is free software; you can redistribute it and/or modify
+# it under the terms of the MIT license. See LICENSE for details.
+#
+
+hsdev=""
+ndev=""
+hsci=""
+hsdev_mac=""
+hsif_pnetid=""
+netif_pnetid=""
+hsci_pnetid=""
+
+function usage {
+cat <<-EOD
+Usage: hsci COMMAND [OPTION]
+
+This tool is designed to control and show HSCI (HiperSockets Converged
+Interfaces) settings. A HiperSockets interface and an external network
+
+COMMANDS
+ add HIPERSOCKETS_DEV NET_DEV Adds an HSCI interface
+ del HSCI_NAME Deletes an HSCI interface
+ show Lists the configured HSCI interfaces
+
+OPTIONS:
+ -v, --version Prints the version number of the hsci tool and exits
+ -h, --help Displays the help information for the command
+EOD
+}
+
+function prereqs_check {
+ if ! [ -x "$(command -v ip)" ]; then
+ echo "Error: No iproute2 installed on this system" >&2
+ return 1
+ fi
+}
+
+function check_pnetids {
+ # get PNETID of the HS
+ local hsif_pnetids=""
+ local netif_pnetids=""
+
+ if [ -e /sys/class/net/$hsdev/device/util_string ]; then
+ hsif_pnetids="$(cat /sys/class/net/$hsdev/device/util_string | tr -d '\000' | iconv -f IBM-1047 -t ASCII)"
+ else
+ if [ -e /sys/class/net/$hsdev/device/chpid ]; then
+ chpid="$(cat /sys/class/net/$hsdev/device/chpid | tr [:upper:] [:lower:])"
+ hsif_pnetids="$(cat /sys/devices/css0/chp0.$chpid/util_string | tr -d '\000' | iconv -f IBM-1047 -t ASCII)"
+ fi
+ fi
+ if [ "$hsif_pnetids" != "" ]; then
+ port_hsif="$(cat /sys/class/net/$hsdev/dev_port)"
+ (( idx=16*$port_hsif+1 ))
+ (( end=$idx+15 ))
+ hsif_pnetid="$(echo "$hsif_pnetids" | cut -c $idx-$end | tr -d ' ')"
+ fi
+
+ # get PNETID of the NET_DEV
+ if [ -e /sys/class/net/$ndev/device/util_string ]; then
+ netif_pnetids="$(cat /sys/class/net/$ndev/device/util_string | tr -d '\000' | iconv -f IBM-1047 -t ASCII)"
+ else
+ if [ -e /sys/class/net/$ndev/device/chpid ]; then
+ chpid="$(cat /sys/class/net/$ndev/device/chpid | tr [:upper:] [:lower:])"
+ netif_pnetids="$(cat /sys/devices/css0/chp0.$chpid/util_string | tr -d '\000' | iconv -f IBM-1047 -t ASCII)"
+ fi
+ fi
+ if [ "$netif_pnetids" != "" ]; then
+ port_netif="$(cat /sys/class/net/$ndev/dev_port)"
+ (( idx=16*$port_netif+1 ))
+ (( end=$idx+15 ))
+ netif_pnetid="$(echo "$netif_pnetids" | cut -c $idx-$end | tr -d ' ')"
+ fi
+
+ #Check PNETIDs
+ if [ "$hsif_pnetid" != "" ] && [ "$netif_pnetid" != "" ] && [ "$netif_pnetid" != "$hsif_pnetid" ]; then
+ echo "Error: $hsdev and $ndev have different PNETIDs! They are $hsif_pnetid and $netif_pnetid respectively" >&2
+ return 1
+ fi
+
+ if [ "$hsif_pnetid" != "" ] && [ "$netif_pnetid" != "" ] && [ "$netif_pnetid" == "$hsif_pnetid" ]; then
+ hsci_pnetid=$hsif_pnetid
+ fi
+}
+
+function verify_precon {
+ echo "Verifying net dev $ndev and HiperSockets dev $hsdev"
+
+ if [ ! -e /sys/class/net/$hsdev ]; then
+ echo "Error: $hsdev does not exist" >&2
+ return 1
+ fi
+ if [ "$(cat /sys/class/net/$hsdev/device/card_type)" != "HiperSockets" ]; then
+ echo "Error: $hsdev is not a HiperSockets device" >&2
+ return 1
+ fi
+ if [ "$(cat /sys/class/net/$hsdev/device/layer2)" != "1" ]; then
+ echo "Error: $hsdev is not in layer 2 mode" >&2
+ return 1
+ fi
+ if [ ! -e /sys/class/net/$hsdev/device/vnicc/bridge_invisible ]; then
+ echo "Error: Missing vnic-characteristics support" >&2
+ return 1
+ fi
+ if [ "$(cat /sys/class/net/$hsdev/device/vnicc/bridge_invisible)" == "n/a" ]; then
+ echo "Error: $hsdev does not support vnicc" >&2
+ return 1
+ fi
+ if [ $(ip link show $hsdev | grep UP | wc -l) -eq 0 ]; then
+ echo "Error: $hsdev is not in state UP" >&2
+ return 1
+ fi
+ if [ $(bridge -d link show dev $hsdev self | grep learning_sync | wc -l) -eq 0 ]; then
+ echo "Error: $hsdev does not support attribute learning_sync" >&2
+ return 1
+ fi
+ if [ $(ip link show $hsdev | grep master | wc -l) -ne 0 ]; then
+ echo "Error: $hsdev is already a bridge port" >&2
+ return 1
+ fi
+
+ #Pre-verify net_dev
+ if [ ! -e /sys/class/net/$ndev ]; then
+ echo "Error: $ndev does not exist" >&2
+ return 1
+ fi
+ if [ "$(cat /sys/class/net/$ndev/device/card_type)" == "HiperSockets" ]; then
+ echo "Error: $ndev is also a HiperSockets device" >&2
+ return 1
+ fi
+ if [ $(ip link show $ndev | grep UP | wc -l) -eq 0 ]; then
+ echo "Error: $ndev is not in state UP" >&2
+ return 1
+ fi
+ if [ $(ip link show $ndev | grep master | wc -l) -ne 0 ]; then
+ echo "Error: $ndev is already a bridge port" >&2
+ return 1
+ fi
+
+ #Check PNETIDs
+ check_pnetids
+ if [ $? -ne 0 ]; then
+ return $?
+ fi
+
+ return 0
+}
+
+function clean_up {
+ bridge link set dev $hsdev learning_sync off self >/dev/null 2>&1
+ echo 0 > /sys/class/net/$hsdev/device/vnicc/bridge_invisible >/dev/null 2>&1
+ bridge fdb del $hsdev_mac dev $ndev >/dev/null 2>&1
+ ip link del $hsci >/dev/null 2>&1
+}
+
+##############################################################################
+## add a new HSCI interface
+##############################################################################
+function add_hsci {
+
+ if [ $# != 2 ]; then
+ echo "hsci: Invalid parameters" >&2
+ echo "Use 'hsci --help' for more information" >&2
+ return 1
+ fi
+ hsdev=$1
+ ndev=$2
+
+ #### Verify preconditions
+ verify_precon
+ if [ $? -ne 0 ]; then
+ return $?
+ fi
+
+ hsci_postfix="$(readlink /sys/class/net/$hsdev/device/cdev0 | tail -c5)"
+ hsci=hsci$hsci_postfix
+
+ echo "Adding $hsci with a HiperSockets dev $hsdev and an external dev $ndev"
+
+ #### Create bridge
+ ip link add name $hsci type bridge stp_state 0 >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Could not create a bridge" >&2
+ return 1
+ fi
+
+ #### Prepare hsdev
+ # Set VNICC of hsdev to invisible
+ #(mandatory for co-existence with HS-OSA bridges!)
+ echo 1 > /sys/class/net/$hsdev/device/vnicc/bridge_invisible
+
+ #### Create bridge ports
+ ip link set dev $ndev master $hsci >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Could not set master for $ndev" >&2
+ clean_up
+ return 1
+ fi
+ ip link set dev $hsdev master $hsci >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Could not set master for $hsdev" >&2
+ clean_up
+ return 1
+ fi
+
+ # no forwarding between ndev and hsdev -> isolated on
+ # ndev is default for outgoing unknown targets -> flood on
+ # no need to learn external LAN targets into fdb -> learning off
+ bridge link set dev $ndev isolated on learning off flood on mcast_flood on >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set bridge attributes on $ndev" >&2
+ clean_up
+ return 1
+ fi
+
+ # no forwarding between ndev and hsdev -> isolated on
+ # fdb will be populated by dev-to-bridge-notification, no need to learn
+ # -> learning off
+ # only send to hsdev, if listed in fdb -> flood off
+ # don't send MC/BC on hsdev -> mcast_flood off
+ bridge link set dev $hsdev isolated on learning off flood off mcast_flood off >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set bridge attributes on $hsdev" >&2
+ clean_up
+ return 1
+ fi
+
+ # NOTE: Although not required, BCs will be sent out on hsdev.
+ # NOTE: We need to receive BCs on hsdev, as z/OS HSCI does ARP requests on HS.
+
+ hsdev_mac="$(cat /sys/class/net/$hsdev/address)"
+ echo "Set $hsdev MAC $hsdev_mac on $ndev and $hsci"
+
+ # set HS MAC on OSA as secondary MAC
+ bridge fdb add $hsdev_mac dev $ndev >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set HS MAC on OSA as secondary MAC" >&2
+ clean_up
+ return 1
+ fi
+
+ # set HS MAC (common MAC) on HSCI as primary MAC
+ ip link set address $hsdev_mac dev $hsci >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set HiperSockets MAC (common MAC) on HSCI as primary MAC" >&2
+ clean_up
+ return 1
+ fi
+
+ # use hsdev MTU
+ if [ -e /sys/class/net/$hsdev/mtu ]; then
+ hs_mtu="$(cat /sys/class/net/$hsdev/mtu)"
+ ip link set dev $hsci mtu $hs_mtu >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set MTU for $hsci " >&2
+ clean_up
+ return 1
+ fi
+ fi
+ ip link set dev $hsci up >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to set $hsci up" >&2
+ clean_up
+ return 1
+ fi
+
+ # Turn on device for bridge notification
+ bridge link set dev $hsdev learning_sync on self >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to turn on device for bridge notification" >&2
+ clean_up
+ return 1
+ fi
+ echo "Successfully added HSCI interface $hsci"
+ return 0
+}
+
+##############################################################################
+## Delete HSCI
+##############################################################################
+
+function del_hsci {
+ if [ $# != 1 ]; then
+ echo "hsci: invalid parameters" >&2
+ echo "Use 'hsci --help' for more information" >&2
+ return 1
+ fi
+ hsci=$1
+ if [ $(ip link show dev $hsci | wc -l) -eq 0 ]; then
+ echo "Error: $hsci does not exit" >&2
+ return 1
+ fi
+ if [ $(ip link show | grep "master $hsci" | wc -l) -eq 0 ]; then
+ echo "Error: $hsci is not an active HSCI interface" >&2
+ return 1
+ fi
+
+ bports="$(ip link show | grep "master $hsci" | awk '{print $2}')"
+ for bport in $bports; do
+ if [ $(bridge -d link show dev $bport | grep "learning_sync on" | wc -l) -ne 0 ]; then
+ hsdev=${bport%:}
+ else
+ ndev=${bport%:}
+ fi
+ done
+ if [ "$hsdev" == "" ]; then
+ echo "Error: $hsci has no active HiperSockets port" >&2
+ return 1
+ fi
+ echo "Deleting HSCI interface $hsci with the HiperSockets $hsdev and the external $ndev"
+
+ bridge link set dev $hsdev learning_sync off self >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to turn off learning_sync on $hsdev" >&2
+ return 1
+ fi
+ echo 0 > /sys/class/net/$hsdev/device/vnicc/bridge_invisible
+
+ hsdev_mac="$(cat /sys/class/net/$hsdev/address)"
+ echo "Deleting $hsev MAC $hsdev_mac on $ndev"
+ bridge fdb del $hsdev_mac dev $ndev >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to delete $hsev MAC $hsdev_mac on $ndev" >&2
+ return 1
+ fi
+
+ ip link del $hsci >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Error: Failed to delete $hsci" >&2
+ return 1
+ fi
+ echo "Successfully deleted device $hsci"
+
+ return 0
+}
+
+##############################################################################
+## Show HSCI
+##############################################################################
+
+function list_active {
+ hsdev=$1
+ local ext=""
+
+ hsci="$(ip link show dev $hsdev | awk '{for(x=1;x<NF;x++) if($x~/master/) print $(x+1)}')"
+ ext="$(ip link show | grep "master $hsci" | grep --invert-match $hsdev | awk '{print $2}')"
+ # remove trailing ':'
+ ndev="${ext%:}"
+
+ check_pnetids
+
+ printf '%-8s %-16s %-15s %-15s\n' "$hsci" "$hsci_pnetid" "$hsdev" "$ndev"
+
+ return 0
+}
+
+function print_header {
+ if [ $header -eq 0 ]; then
+ echo "HSCI PNET_ID HiperSockets External "
+ echo "------------------------------------------------------------"
+ fi
+}
+
+function list_one {
+ local hsnetdev=$1
+
+ if [ $(bridge -d link show dev $hsnetdev | grep "learning_sync on" | wc -l) -ne 0 ]; then
+ print_header
+ list_active $hsnetdev
+ fi
+
+ return 0
+}
+
+function show_hsci {
+ if [ $# != 0 ]; then
+ echo "hsci: invalid parameters" >&2
+ echo "Use 'hsci --help' for more information" >&2
+ return 1
+ fi
+ header=0
+
+ for hs_net_dev in $(ls -1 /sys/class/net/); do
+ list_one $hs_net_dev
+ done
+
+ return 0
+}
+
+#==============================================================================
+
+function print_version()
+{
+ echo "hsci utility: version %S390_TOOLS_VERSION%"
+ echo "Copyright IBM Corp. 2020"
+}
+
+##############################################################################
+##### Main
+##############################################################################
+prereqs_check
+
+args="$(getopt -u -o hv -l help,version -- $*)"
+[ $? -ne 0 ] && exit 2
+set -- $args
+while true; do
+ case $1 in
+ -v | --version)
+ print_version
+ exit 0
+ ;;
+ -h | --help)
+ usage
+ exit 0
+ ;;
+ --)
+ ;;
+ add) shift
+ add_hsci "$@"
+ exit $?
+ ;;
+ del) shift
+ del_hsci "$@"
+ exit $?
+ ;;
+ show) shift
+ show_hsci "$@"
+ exit $?
+ ;;
+ *) echo "hsci: Please specify a valid command or option" >&2
+ echo "Use 'hsci --help' for more information" >&2
+ exit 1
+ esac
+ shift
+done
+
diff --git a/hsci/hsci.8 b/hsci/hsci.8
new file mode 100644
index 00000000..fc170532
--- /dev/null
+++ b/hsci/hsci.8
@@ -0,0 +1,100 @@
+.\" Copyright IBM Corp. 2020
+
+.TH HSCI 8 "November 2020" "s390-tools" "Linux Programmer's Manual"
+
+
+.SH NAME
+.B hsci
+\- control and show HSCI settings.
+
+
+.SH SYNOPSIS
+.B hsci add
+.I HSDEV
+.I NETDEV
+.br
+.B hsci del
+.I HSCINAME
+.br
+.B hsci show
+.br
+.B hsci [\-hv]
+
+.SH DESCRIPTION
+.BI hsci
+is used to control and show HSCI (HiperSockets Converged Interfaces) settings. A HiperSockets interface and an external network interface are converged into an HSCI interface.
+
+.SH COMMANDS
+.TP
+.B add \fIHSDEV\fR \fINETDEV\fR
+.RS .4i
+.PP
+Adds an HSCI interface
+.PP
+.I HSDEV
+is the interface name of the HiperSockets device to be converged into the HSCI interface.
+.PP
+.I NETDEV
+is the interface name of the external network device to be converged into the HSCI interface.
+.RE
+
+.TP
+.B del \fIHSCINAME\fR
+.RS .4i
+.PP
+Deletes an HSCI interface
+.PP
+.I HSCINAME
+is the name of the HSCI interface for the HiperSockets device and the external network device.
+.RE
+
+.TP
+.B show
+.RS .4i
+.PP
+Lists the configured HSCI interfaces.
+.RE
+
+.SH OPTIONS
+.TP
+.BR \-v ", " \-\-version
+Prints the version number of hsci and exits.
+.TP
+.BR \-h ", " \-\-help
+Displays the help information for the command.
+
+.SH EXIT CODES
+.TP
+.BR "0"
+The hsci command ran successfully.
+
+.TP
+.BR "1"
+An error occurred.
+
+.SH EXAMPLE
+.BR "hsci show"
+.TP
+.RB
+Lists the configured HSCI interfaces:
+.RS 1.2i
+
+HSCI PNET_ID HiperSockets External
+.br
+-----------------------------------------
+.br
+hsci8410 NET1 enc8410 encb040
+
+.RE
+
+.SH SEE ALSO
+.nf
+ip(8), bridge(8)
+.fi
+
+.SH AUTHOR
+.nf
+Written by Alexandra Winter <wintera@linux.ibm.com>
+ Wenjia Zhang <wenjia@linux.ibm.com>
+.fi
+
--
2.17.1