File _patchinfo of Package patchinfo.22712

<patchinfo incident="22712">
  <issue tracker="bnc" id="1194950">[RPi4] Outdated raspberrypi-eeprom package</issue>
  <packager>iivanov</packager>
  <rating>moderate</rating>
  <category>recommended</category>
  <summary>Recommended update for raspberrypi-eeprom</summary>
  <description>This update for raspberrypi-eeprom fixes the following issues:

Update to version 2021.04.29 (bsc#1194950)

- Use upstream version schema (year.month.day) instead of arbitrary 0.0
- Add support for NVMe to the bootloader with a new NVMe boot mode
- Add support for [cm4] and [pi400] config conditionals filters
- TFTP - reply to duplicate ACKS
- Skip rendering of HDMI diagnostics display for the first 8 seconds
  unless an error occurs
- Add support for the BCM2711 XHCI controller - BOOT_ORDER 0x5
- Add XHCI protocol layer fixes for non-VLI controllers
- Avoid USB MSD timeout of there is only one device
- Fix recovery.bin error handler so that the LED error pattern
  is still displayed even if HDMI or SDRAM fail
- Fix GPIO expander reset issue on some Pi4B 1.1 to 1.3 boards
- Fix regression for GPIO expander reset change which caused PMIC
  reset to get card out of 1V8 mode to be missed
- Timeout USB MSD commands and move to the next boot mode if a device
  stops responding
- Add support for booting from the BCM2711 XHCI controller which is
  the USB-C socket on Pi 4B / Pi 400 and the type A sockets on Compute
  Module 4 IO board
- Validate SDRAM in recovery mode
</description>
</patchinfo>